In this study, slow strain rate tensile testing at elevated temperature is used to evaluate the influence of temperature and strain rate on deformation behaviour in two different austenitic alloys. One austenitic stai...In this study, slow strain rate tensile testing at elevated temperature is used to evaluate the influence of temperature and strain rate on deformation behaviour in two different austenitic alloys. One austenitic stainless steel （AISI 316L） and one nickel-base alloy （Alloy 617） have been investigated. Scanning electron microscopy related techniques as electron channelling contrast imaging and electron backscattering diffraction have been used to study the damage and fracture micromechanisms. For both alloys the dominante damage micromech- anisms are slip bands and planar slip interacting with grain bounderies or precipitates causing strain concentrations. The dominante fracture micromechanism when using a slow strain rate at elevated temperature, is microcracks at grain bounderies due to grain boundery embrittlement caused by precipitates. The decrease in strain rate seems to have a small influence on dynamic strain ageing at 650℃.展开更多
In recent decades,many software reliability growth models（SRGMs） have been proposed for the engineers and testers in measuring the software reliability precisely.Most of them is established based on the non-homogene...In recent decades,many software reliability growth models（SRGMs） have been proposed for the engineers and testers in measuring the software reliability precisely.Most of them is established based on the non-homogeneous Poisson process（NHPP）,and it is proved that the prediction accuracy of such models could be improved by adding the describing of characterization of testing effort.However,some research work indicates that the fault detection rate（FDR） is another key factor affects final software quality.Most early NHPPbased models deal with the FDR as constant or piecewise function,which does not fit the different testing stages well.Thus,this paper first incorporates a multivariate function of FDR,which is bathtub-shaped,into the NHPP-based SRGMs considering testing effort in order to further improve performance.A new model framework is proposed,and a stepwise method is used to apply the framework with real data sets to find the optimal model.Experimental studies show that the obtained new model can provide better performance of fitting and prediction compared with other traditional SRGMs.展开更多
Optimum utilization of the loading capability of engineering materials is an important and active contribution to protect nature's limited resources,and it is the key for economic design methods.In order to make u...Optimum utilization of the loading capability of engineering materials is an important and active contribution to protect nature's limited resources,and it is the key for economic design methods.In order to make use of the materials' resources,those must be known very well;but conventional test methods will offer only limited informational value.The range of questions raised is as wide as the application of engineering materials,and partially they are very specific.The development of huge computer powers enables numeric modelling to simulate structural behaviour in rather complex loading environments-so the real material behaviour is known under the given loading conditions.Here the art of material testing design starts.To study the material behaviour under very distinct and specific loading conditions makes it necessary to simulate different temperature ranges,loading speeds, environments etc.and mostly there doesn't exist any commonly agreed test standard.In this contribution two popular,non-standard test procedures and test systems will be discussed on the base of their application background,special design features as well as test results and typically gained information:The demand for highspeed tests up to 1000 s^(-1) of strain rate is very specific and originates primarily in the automotive industry and the answers enable CAE analysis of crashworthiness of vehicle structures under crash conditions.The information on the material behaviour under multiaxial loading conditions is a more general one.Multiaxial stress states can be reduced to an equivalent stress,which allows the evaluation of the material's constraint and criticality of stress state.Both discussed examples shall show that the open dialogue between the user and the producer of testing machines allows custom-tailored test solutions.展开更多
<span style="font-family:Verdana;">This study aimed to evaluate the influence of measuring the length of the medial collateral ligament (MCL) to compare the MCL burden when the knee joint is placed und...<span style="font-family:Verdana;">This study aimed to evaluate the influence of measuring the length of the medial collateral ligament (MCL) to compare the MCL burden when the knee joint is placed under valgus stress in the open and closed and closed kinetic chain.</span><b> </b><span style="font-family:Verdana;">Two examiners conducted the examination. The MCL length was measured using ultrasonography. Two subjects were measured in unload bearing and load-bearing positions, with and without valgus stress test at the knee joint extension and 30<span style="white-space:nowrap;">°</span> flexion, under eight different measurement conditions. The MCL of the subject was delineated in the longitudinal direction using an ultrasound system. The attachment points of the medial femoral and tibial condyle of the MCL were identified, and the ligament length was measured. The MCL rate before and after the valgus stress test in the loading and unloading positions was calculated.</span><b> </b><span style="font-family:Verdana;">The MCL length increased by an average of 8.9% when the external stress test was performed in the non-weight bearing and knee extension positions and by an average of 17.0% when external stress was applied in the non-weight bearing and knee flexion positions. The MCL length increased by an average of 12.2% when the external stress test was performed in the load-bearing and knee extension positions and an average of 8.9% when the valgus stress test was applied in load-bearing and knee flexion positions. In conclusion, the effect of valgus stress on the MCL differs between load-bearing and non-load-bearing positions. It is considered that the dynamic stabilization mechanism works in the knee joint flexion position in the load position and works simultaneously as the static stabilization mechanism, which limits the knee joint valgus and reduces the extension rate of MCL. Therefore, this study reconsiders the shifting of traditional therapy from open kinetic chain to close kinetic chain.</span>展开更多
China’s Ministry of Commerce(MOFCOM)and the Ministry of Industry and Information Technology(MIIT)have designed a stress-test for China’s labor-intensive industries,
To study the role of autonomic nervous system in the period of developing syncope induced by head-up tilt test(HUT), we analysed the changes of heart rate power spectral density(HRPSD) in 50 patients with unexplained ...To study the role of autonomic nervous system in the period of developing syncope induced by head-up tilt test(HUT), we analysed the changes of heart rate power spectral density(HRPSD) in 50 patients with unexplained syncope, including 15 positive patients (Group 1) and 35 negative patients(Group 2), and 15 negative healthy persons(Group 3) in 5 minute periods before and after tilting and 5 minutes before the end of test. HRPSD and their changes in total(T), very low-frequence(VLF), low-frequence(LF), high-frequence(HF) and the ratio of low/high frequence(LF/HF) were similar (P>0.05) 5 minutes before and after tilting among three groups. Five minutes before the end of test, Group 1 had obvious increase of T, VLF, LF and LF/HF while Group 2 and 3 had not such significant changes. There was significant difference(P<0.01) compared Group 1 with Group 2, 3. The results showed that the abnormal regulatory function of autonomic nervous system played an important role in the mechanism of symcope induced by HUT, the positive group had abnormal increase of sympathetic tone and imbalance of sympathetic/parasympathetic neural tone before syncope appeared.展开更多
Objective This paper propses a family of summary chi square tests for comparing survival rates at all points of time between two groups. Methods They are respectively derived from the Peto et al. expression for the lo...Objective This paper propses a family of summary chi square tests for comparing survival rates at all points of time between two groups. Methods They are respectively derived from the Peto et al. expression for the log rank test, the Mantel Haenszel expression for the log rank test, and the generalized Wilcoxon test by means of using the homogenetic effective sample size in place of the number at risk and using the corresponding numerator of the conditional probability surviving in place of the death number. Results After such derivations they become clearer in clinical significance, more powerful, and free from the assumption of proportional hazard. Conclusion These tests can be employed in analyzing the clinical data of cancer. A worked example illustrates the methodology.展开更多
Objective: To examine the autonomic function using HRV measures in apparently healthy individuals undergoing exercise stress test (EST) and demonstrating slow HRR response. Methods: HRV was measured with 12 lead ECGs ...Objective: To examine the autonomic function using HRV measures in apparently healthy individuals undergoing exercise stress test (EST) and demonstrating slow HRR response. Methods: HRV was measured with 12 lead ECGs during graded EST and analyzed via a post-processing method. Autonomic function was determined by Power Spectral Analysis of the very low frequency (VLF), low frequency (LF), high frequency (HF), and the ratio of LF/HF. We correlated HRV indices with resting, exercise, and recovery data. Results: No differences were found in anthropometric measurements, peak EST HR, and METS between individuals with slow HRR (below 18 b/min) compared with controls (HRR > 18 b/min). Only the VLF component of the HRV indices was statistically different (p = 0.03) at one-minute post-exercise compared with controls. Additionally, a significant correlation between HRR and resting LF and HF indices was found in the individuals with slow HRR but not in the controls. Conclusion: In apparently healthy individuals with slow HRR post-EST, autonomic function did not demonstrate any differences at any phase of the EST, including at one minute of recovery. However, a significant correlation was found between resting LF and HF powers and HRR in individuals with slow vagal reactivation post-exercise. The clinical and prognostic implications of such observation deserve further investigation.展开更多
Factors directly affecting the extraction rate of the piles pulled out by a vibratory pulling system are summarized and classified into five categories(excitation force,resistance,vibration amplitude,pile plumbness ke...Factors directly affecting the extraction rate of the piles pulled out by a vibratory pulling system are summarized and classified into five categories(excitation force,resistance,vibration amplitude,pile plumbness keeping,and slowing down at the later stage) from the mechanics and engineering practice.Field tests on steel sheet piles extracted by vibratory technique in different soil conditions are conducted to ascertain how these factors affect the extraction rate of a pile with regard to three major actors of vibratory pile pulling:the pile to be extracted,the selected pulling system,and the imposed soil conditions.The extraction rates of three different sheet pile types(having up to four different lengths) pulled out by two different vibratory pulling systems are documented.The piles with different lengths and types,pulled out with or without a clutch,have different extraction rates.The working parameters governing the vibratory hammer,such as excitation force and vibration amplitude,exert significant influences on the rate of pile extraction,especially in the early stages of up-lift process.The extraction rate of the piles driven in different soil conditions is uniform because different extraction resistances mainly refer to shaft friction.The properties of the pile-soil interface influence the extraction rate of the piles,and the extraction rate decreases with the time for which the piles have been buried in the earth.展开更多
To evaluate the values of abnormal heart rate recovery （HRR） after treadmill exercise test in patients with coronary artery disease （CAD）. Methods One hundred and seventy-eight consecutive cases of suspected CAD w...To evaluate the values of abnormal heart rate recovery （HRR） after treadmill exercise test in patients with coronary artery disease （CAD）. Methods One hundred and seventy-eight consecutive cases of suspected CAD who underwent symptom-limited treadmill exercise test （TET） and coronary angiography （CAG） were enrolled and divided into normal and abnormal HRR group based on the status of the values of HRR one or two minutes after TET. The clinical characteristics, TET parameters and CAG results of the two groups were compared attempted to assess the value of HRR on patients with CAD. Results （ 1 ） The cases of smoking, diabetes mellitus （DM） and ST segment deviation at rest in abnormal HRR group were more significantly than those in normal HRR group （ all P 〈 0. 05 ）. （2） The subjects of abnormal HRR usually had higher basal heart rate, more cases exhibited ST segment abnormality and or exercise-limited angina during or after TET（P 〈 0. 01 and P 〈 0. 05, respectively）, but lower level of peak heart rate attained （ P 〈 0. 05 ） than those in normal group. The values of metabolism equivalents and duration of TET between the two groups displayed phenomenal difference （ P 〈 0. 05 ）. There were more samples acquired moderate to high level of Duke test score and chronotropic incompetence in the group of abnormal HRR, compared to the normal HRR group （P 〈 0. 01 ）. （3） The cases of negative CAG results in the group of normal and abnormal HRR group were 73 （66. 97 % ） and 24 （34. 78 % ）. Cases of significant coronary lesions （ at least one major coronary vessel ≥ 50 % stenosis） amongst the subgroup of positive CAG were 36 （ 33.03 % ） and 45 （65.22 % ）, severe coronary lesions （ three-vessel, left main or the equivalents of left main） were 10 （9. 17 % ） and 17 （24. 64 % ） for normal and abnormal HRR respectively （P 〈 0. 01 ）. Accordingly, the Gensini scores in the subunit of abnormal HRR increased. （4）Linear correlation analysis indicate there was a negative correlation between the values of HRR in the first and second minutes and indices of severity of CAD （ all P 〈 0. 01 ）. The analysis of auxiliary diagnostic value of abnormal HRR indicated the annexed HRR standard had higher negative predictive value. Conclusions The status of HRR after TET are not only influenced by the clinical factors related to the cardiac autonomic function, but also associated with the extent of CAD. （ S Chin J Cardiol 2009 ; 10（1）：1-8）展开更多
基金supported by AB Sandvik Material Technology in Sweden and the Swedish Energy Agency through the Research Consortium of Materials Technology for Thermal Energy Processes(KME-501)Agora Materiae and the Strategic Faculty Grant AFM(SFO-MAT-LiU#2009-00971)at Linkping University
文摘In this study, slow strain rate tensile testing at elevated temperature is used to evaluate the influence of temperature and strain rate on deformation behaviour in two different austenitic alloys. One austenitic stainless steel （AISI 316L） and one nickel-base alloy （Alloy 617） have been investigated. Scanning electron microscopy related techniques as electron channelling contrast imaging and electron backscattering diffraction have been used to study the damage and fracture micromechanisms. For both alloys the dominante damage micromech- anisms are slip bands and planar slip interacting with grain bounderies or precipitates causing strain concentrations. The dominante fracture micromechanism when using a slow strain rate at elevated temperature, is microcracks at grain bounderies due to grain boundery embrittlement caused by precipitates. The decrease in strain rate seems to have a small influence on dynamic strain ageing at 650℃.
基金supported by the National Natural Science Foundation of China(61070220)the Anhui Provincial Natural Science Foundation(1408085MKL79)
文摘In recent decades,many software reliability growth models（SRGMs） have been proposed for the engineers and testers in measuring the software reliability precisely.Most of them is established based on the non-homogeneous Poisson process（NHPP）,and it is proved that the prediction accuracy of such models could be improved by adding the describing of characterization of testing effort.However,some research work indicates that the fault detection rate（FDR） is another key factor affects final software quality.Most early NHPPbased models deal with the FDR as constant or piecewise function,which does not fit the different testing stages well.Thus,this paper first incorporates a multivariate function of FDR,which is bathtub-shaped,into the NHPP-based SRGMs considering testing effort in order to further improve performance.A new model framework is proposed,and a stepwise method is used to apply the framework with real data sets to find the optimal model.Experimental studies show that the obtained new model can provide better performance of fitting and prediction compared with other traditional SRGMs.
文摘Optimum utilization of the loading capability of engineering materials is an important and active contribution to protect nature's limited resources,and it is the key for economic design methods.In order to make use of the materials' resources,those must be known very well;but conventional test methods will offer only limited informational value.The range of questions raised is as wide as the application of engineering materials,and partially they are very specific.The development of huge computer powers enables numeric modelling to simulate structural behaviour in rather complex loading environments-so the real material behaviour is known under the given loading conditions.Here the art of material testing design starts.To study the material behaviour under very distinct and specific loading conditions makes it necessary to simulate different temperature ranges,loading speeds, environments etc.and mostly there doesn't exist any commonly agreed test standard.In this contribution two popular,non-standard test procedures and test systems will be discussed on the base of their application background,special design features as well as test results and typically gained information:The demand for highspeed tests up to 1000 s^(-1) of strain rate is very specific and originates primarily in the automotive industry and the answers enable CAE analysis of crashworthiness of vehicle structures under crash conditions.The information on the material behaviour under multiaxial loading conditions is a more general one.Multiaxial stress states can be reduced to an equivalent stress,which allows the evaluation of the material's constraint and criticality of stress state.Both discussed examples shall show that the open dialogue between the user and the producer of testing machines allows custom-tailored test solutions.
文摘<span style="font-family:Verdana;">This study aimed to evaluate the influence of measuring the length of the medial collateral ligament (MCL) to compare the MCL burden when the knee joint is placed under valgus stress in the open and closed and closed kinetic chain.</span><b> </b><span style="font-family:Verdana;">Two examiners conducted the examination. The MCL length was measured using ultrasonography. Two subjects were measured in unload bearing and load-bearing positions, with and without valgus stress test at the knee joint extension and 30<span style="white-space:nowrap;">°</span> flexion, under eight different measurement conditions. The MCL of the subject was delineated in the longitudinal direction using an ultrasound system. The attachment points of the medial femoral and tibial condyle of the MCL were identified, and the ligament length was measured. The MCL rate before and after the valgus stress test in the loading and unloading positions was calculated.</span><b> </b><span style="font-family:Verdana;">The MCL length increased by an average of 8.9% when the external stress test was performed in the non-weight bearing and knee extension positions and by an average of 17.0% when external stress was applied in the non-weight bearing and knee flexion positions. The MCL length increased by an average of 12.2% when the external stress test was performed in the load-bearing and knee extension positions and an average of 8.9% when the valgus stress test was applied in load-bearing and knee flexion positions. In conclusion, the effect of valgus stress on the MCL differs between load-bearing and non-load-bearing positions. It is considered that the dynamic stabilization mechanism works in the knee joint flexion position in the load position and works simultaneously as the static stabilization mechanism, which limits the knee joint valgus and reduces the extension rate of MCL. Therefore, this study reconsiders the shifting of traditional therapy from open kinetic chain to close kinetic chain.</span>
文摘China’s Ministry of Commerce(MOFCOM)and the Ministry of Industry and Information Technology(MIIT)have designed a stress-test for China’s labor-intensive industries,
文摘To study the role of autonomic nervous system in the period of developing syncope induced by head-up tilt test(HUT), we analysed the changes of heart rate power spectral density(HRPSD) in 50 patients with unexplained syncope, including 15 positive patients (Group 1) and 35 negative patients(Group 2), and 15 negative healthy persons(Group 3) in 5 minute periods before and after tilting and 5 minutes before the end of test. HRPSD and their changes in total(T), very low-frequence(VLF), low-frequence(LF), high-frequence(HF) and the ratio of low/high frequence(LF/HF) were similar (P>0.05) 5 minutes before and after tilting among three groups. Five minutes before the end of test, Group 1 had obvious increase of T, VLF, LF and LF/HF while Group 2 and 3 had not such significant changes. There was significant difference(P<0.01) compared Group 1 with Group 2, 3. The results showed that the abnormal regulatory function of autonomic nervous system played an important role in the mechanism of symcope induced by HUT, the positive group had abnormal increase of sympathetic tone and imbalance of sympathetic/parasympathetic neural tone before syncope appeared.
文摘Objective This paper propses a family of summary chi square tests for comparing survival rates at all points of time between two groups. Methods They are respectively derived from the Peto et al. expression for the log rank test, the Mantel Haenszel expression for the log rank test, and the generalized Wilcoxon test by means of using the homogenetic effective sample size in place of the number at risk and using the corresponding numerator of the conditional probability surviving in place of the death number. Results After such derivations they become clearer in clinical significance, more powerful, and free from the assumption of proportional hazard. Conclusion These tests can be employed in analyzing the clinical data of cancer. A worked example illustrates the methodology.
文摘Objective: To examine the autonomic function using HRV measures in apparently healthy individuals undergoing exercise stress test (EST) and demonstrating slow HRR response. Methods: HRV was measured with 12 lead ECGs during graded EST and analyzed via a post-processing method. Autonomic function was determined by Power Spectral Analysis of the very low frequency (VLF), low frequency (LF), high frequency (HF), and the ratio of LF/HF. We correlated HRV indices with resting, exercise, and recovery data. Results: No differences were found in anthropometric measurements, peak EST HR, and METS between individuals with slow HRR (below 18 b/min) compared with controls (HRR > 18 b/min). Only the VLF component of the HRV indices was statistically different (p = 0.03) at one-minute post-exercise compared with controls. Additionally, a significant correlation between HRR and resting LF and HF indices was found in the individuals with slow HRR but not in the controls. Conclusion: In apparently healthy individuals with slow HRR post-EST, autonomic function did not demonstrate any differences at any phase of the EST, including at one minute of recovery. However, a significant correlation was found between resting LF and HF powers and HRR in individuals with slow vagal reactivation post-exercise. The clinical and prognostic implications of such observation deserve further investigation.
基金the National Natural Science Foundation of China(Nos.51428901 and 51379122)
文摘Factors directly affecting the extraction rate of the piles pulled out by a vibratory pulling system are summarized and classified into five categories(excitation force,resistance,vibration amplitude,pile plumbness keeping,and slowing down at the later stage) from the mechanics and engineering practice.Field tests on steel sheet piles extracted by vibratory technique in different soil conditions are conducted to ascertain how these factors affect the extraction rate of a pile with regard to three major actors of vibratory pile pulling:the pile to be extracted,the selected pulling system,and the imposed soil conditions.The extraction rates of three different sheet pile types(having up to four different lengths) pulled out by two different vibratory pulling systems are documented.The piles with different lengths and types,pulled out with or without a clutch,have different extraction rates.The working parameters governing the vibratory hammer,such as excitation force and vibration amplitude,exert significant influences on the rate of pile extraction,especially in the early stages of up-lift process.The extraction rate of the piles driven in different soil conditions is uniform because different extraction resistances mainly refer to shaft friction.The properties of the pile-soil interface influence the extraction rate of the piles,and the extraction rate decreases with the time for which the piles have been buried in the earth.
文摘To evaluate the values of abnormal heart rate recovery （HRR） after treadmill exercise test in patients with coronary artery disease （CAD）. Methods One hundred and seventy-eight consecutive cases of suspected CAD who underwent symptom-limited treadmill exercise test （TET） and coronary angiography （CAG） were enrolled and divided into normal and abnormal HRR group based on the status of the values of HRR one or two minutes after TET. The clinical characteristics, TET parameters and CAG results of the two groups were compared attempted to assess the value of HRR on patients with CAD. Results （ 1 ） The cases of smoking, diabetes mellitus （DM） and ST segment deviation at rest in abnormal HRR group were more significantly than those in normal HRR group （ all P 〈 0. 05 ）. （2） The subjects of abnormal HRR usually had higher basal heart rate, more cases exhibited ST segment abnormality and or exercise-limited angina during or after TET（P 〈 0. 01 and P 〈 0. 05, respectively）, but lower level of peak heart rate attained （ P 〈 0. 05 ） than those in normal group. The values of metabolism equivalents and duration of TET between the two groups displayed phenomenal difference （ P 〈 0. 05 ）. There were more samples acquired moderate to high level of Duke test score and chronotropic incompetence in the group of abnormal HRR, compared to the normal HRR group （P 〈 0. 01 ）. （3） The cases of negative CAG results in the group of normal and abnormal HRR group were 73 （66. 97 % ） and 24 （34. 78 % ）. Cases of significant coronary lesions （ at least one major coronary vessel ≥ 50 % stenosis） amongst the subgroup of positive CAG were 36 （ 33.03 % ） and 45 （65.22 % ）, severe coronary lesions （ three-vessel, left main or the equivalents of left main） were 10 （9. 17 % ） and 17 （24. 64 % ） for normal and abnormal HRR respectively （P 〈 0. 01 ）. Accordingly, the Gensini scores in the subunit of abnormal HRR increased. （4）Linear correlation analysis indicate there was a negative correlation between the values of HRR in the first and second minutes and indices of severity of CAD （ all P 〈 0. 01 ）. The analysis of auxiliary diagnostic value of abnormal HRR indicated the annexed HRR standard had higher negative predictive value. Conclusions The status of HRR after TET are not only influenced by the clinical factors related to the cardiac autonomic function, but also associated with the extent of CAD. （ S Chin J Cardiol 2009 ; 10（1）：1-8）
