Formation testing while drilling is an innovative technique that is replacing conventional pressure testing in which the fluid sampling is conducted in a relatively short time following the drilling. At this time, mud...Formation testing while drilling is an innovative technique that is replacing conventional pressure testing in which the fluid sampling is conducted in a relatively short time following the drilling. At this time, mud invasion has just started, mudcake has not formed entirely and the formation pressure is not stable. Therefore, it is important to study the influence of the downhole dynamic environment on pressure testing and fluid sampling. This paper applies an oil-water two phase finite element model to study the influence of mudcake quality and mud filtrate invasion on supercharge pressure, pretest and sampling in the reservoirs of different permeability. However, the study is only for the cases with water based mud in the wellbore. The results illustrate that the mudcake quality has a significant influence on the supercharge pressure and fluid sampling, while the level of mud filtrate invasion has a strong impact on pressure testing and sampling. In addition, in-situ formation pressure testing is more difficult in low permeability reservoirs as the mud filtrate invasion is deeper and therefore degrades the quality of fluid sampling. Finally, a field example from an oil field on the Alaskan North Slope is presented to validate the numerical studies of the effects of downhole dynamic conditions on formation testing while drilling.展开更多
Using the self-developed visualization test apparatus, centrifuge model tests at 20 g were carried out to research the macro and microscopic formation mechanism of coarse sand debris flows. The formation mode and soil...Using the self-developed visualization test apparatus, centrifuge model tests at 20 g were carried out to research the macro and microscopic formation mechanism of coarse sand debris flows. The formation mode and soil-water interaction mechanism of the debris flows were analyzed from both macroscopic and microscopic points of view respectively using high digital imaging equipment and micro-structure analysis software Geodip. The test results indicate that the forming process of debris flow mainly consists of three stages, namely the infiltration and softening stage, the overall slide stage, and debris flow stage. The essence of simulated coarse sand slope forming debris flow is that local fluidization cause slope to wholly slide. The movement of small particles forms a transient stagnant layer with increasing saturation, causing soil shear strength lost and local fluidization. When the driving force of the saturated soil exceeds the resisting force, debris flow happens on the coarse sand slope immediately.展开更多
This paper deals with a simulated test of biogenic mineralization made with a blue-green alga species,Spirulina platensix. The data in the experiment were recorded by a computerized surveying system. The influ-ence of...This paper deals with a simulated test of biogenic mineralization made with a blue-green alga species,Spirulina platensix. The data in the experiment were recorded by a computerized surveying system. The influ-ence of algae on the accumulation of phosphorus by changing their microenvironment to promote the forma-tion and deposition of phosphate was studied. The results show that the pH value of cultural liquor rose up to 10 and the redox potential (Eh) may dropby 100-200 mV during the algal logarithmic growth stage, and the cultrual liquor was changed into a mediumwith a weakly reducing condition. At the end of the logarithmic growth stage white deposits of Na_2Ca(CO_3)_2·5H_2O and Ca_2Mg (PO_4)_2·2H_2O were formed on the floor of cultural containers. The test presented a wduableevidence for the theory of biogenic mineralization.展开更多
The introduction and application of formation testing technology to China has been relatively late.In the 1940's,the pounding valve tester developed by Johnston Company was used in.Yumen Oilfield.After the 1950...The introduction and application of formation testing technology to China has been relatively late.In the 1940's,the pounding valve tester developed by Johnston Company was used in.Yumen Oilfield.After the 1950's,the formation testing technology was no longer used due to introduction and application of former Soviet Union's testing technology.展开更多
A new method, which is based on formation fracturing test and Kaiser effect method, has been developed for confirming the oilfield in-situ stress in this paper. The new method has been used in a certain oilfield of Ch...A new method, which is based on formation fracturing test and Kaiser effect method, has been developed for confirming the oilfield in-situ stress in this paper. The new method has been used in a certain oilfield of China and the determined oilfield in-situ stresses is more accurate than that based on one single method.展开更多
The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil a...The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.展开更多
基金supported by the National Natural Science Foundation of China (No. 50674098)Major Project of Chinese Science and Technology (No. 2011ZX 05000-020-04)Major Project of SINOPEC Science and Technology (No. P13147)
文摘Formation testing while drilling is an innovative technique that is replacing conventional pressure testing in which the fluid sampling is conducted in a relatively short time following the drilling. At this time, mud invasion has just started, mudcake has not formed entirely and the formation pressure is not stable. Therefore, it is important to study the influence of the downhole dynamic environment on pressure testing and fluid sampling. This paper applies an oil-water two phase finite element model to study the influence of mudcake quality and mud filtrate invasion on supercharge pressure, pretest and sampling in the reservoirs of different permeability. However, the study is only for the cases with water based mud in the wellbore. The results illustrate that the mudcake quality has a significant influence on the supercharge pressure and fluid sampling, while the level of mud filtrate invasion has a strong impact on pressure testing and sampling. In addition, in-situ formation pressure testing is more difficult in low permeability reservoirs as the mud filtrate invasion is deeper and therefore degrades the quality of fluid sampling. Finally, a field example from an oil field on the Alaskan North Slope is presented to validate the numerical studies of the effects of downhole dynamic conditions on formation testing while drilling.
基金Funded by National Natural Science Foundation of China(Grant No.41272296)
文摘Using the self-developed visualization test apparatus, centrifuge model tests at 20 g were carried out to research the macro and microscopic formation mechanism of coarse sand debris flows. The formation mode and soil-water interaction mechanism of the debris flows were analyzed from both macroscopic and microscopic points of view respectively using high digital imaging equipment and micro-structure analysis software Geodip. The test results indicate that the forming process of debris flow mainly consists of three stages, namely the infiltration and softening stage, the overall slide stage, and debris flow stage. The essence of simulated coarse sand slope forming debris flow is that local fluidization cause slope to wholly slide. The movement of small particles forms a transient stagnant layer with increasing saturation, causing soil shear strength lost and local fluidization. When the driving force of the saturated soil exceeds the resisting force, debris flow happens on the coarse sand slope immediately.
文摘This paper deals with a simulated test of biogenic mineralization made with a blue-green alga species,Spirulina platensix. The data in the experiment were recorded by a computerized surveying system. The influ-ence of algae on the accumulation of phosphorus by changing their microenvironment to promote the forma-tion and deposition of phosphate was studied. The results show that the pH value of cultural liquor rose up to 10 and the redox potential (Eh) may dropby 100-200 mV during the algal logarithmic growth stage, and the cultrual liquor was changed into a mediumwith a weakly reducing condition. At the end of the logarithmic growth stage white deposits of Na_2Ca(CO_3)_2·5H_2O and Ca_2Mg (PO_4)_2·2H_2O were formed on the floor of cultural containers. The test presented a wduableevidence for the theory of biogenic mineralization.
文摘The introduction and application of formation testing technology to China has been relatively late.In the 1940's,the pounding valve tester developed by Johnston Company was used in.Yumen Oilfield.After the 1950's,the formation testing technology was no longer used due to introduction and application of former Soviet Union's testing technology.
文摘A new method, which is based on formation fracturing test and Kaiser effect method, has been developed for confirming the oilfield in-situ stress in this paper. The new method has been used in a certain oilfield of China and the determined oilfield in-situ stresses is more accurate than that based on one single method.
文摘The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.
