The analysis of natural vibration characteristics has become one of important steps of the manufacture and dynamic design in the aerospace industry. This paper presents a new scenario called virtual cutting in the con...The analysis of natural vibration characteristics has become one of important steps of the manufacture and dynamic design in the aerospace industry. This paper presents a new scenario called virtual cutting in the context of the transfer matrix method of linear multibody systems closed- loop topology for computing the free vibration characteristics of elastically coupled flexible launch vehicle boosters. In this approach, the coupled system is idealized as a triple-beam system-like structure coupled by linear translational springs, where a non-uniform free-free Euler-Bemoulli beam is used. A large thrust-to-weight ratio leads to large axial accelera- tions that result in an axial inertia load distribution from nose to tail. Consequently, it causes the development of significant compressive forces along the length of the launch vehicle. Therefore, it is important to take into account this effect in the transverse vibration model. This scenario does not need the global dynamics equations of a system, and it has high computational efficiency and low memory requirements. The validity of the presented scenario is achieved through com- parison to other approaches published in the literature.展开更多
The first order differential matrix equations of the host shell and constrained layer for a sandwich rotational shell are derived based on the thin shell theory.Employing the layer wise principle and first order shear...The first order differential matrix equations of the host shell and constrained layer for a sandwich rotational shell are derived based on the thin shell theory.Employing the layer wise principle and first order shear deformation theory, only considering the shearing deformation of the viscoelastic layer, the integrated first order differential matrix equation of a passive constrained layer damping rotational shell is established by combining with the normal equilibrium equation of the viscoelastic layer.A highly precise transfer matrix method is developed by extended homogeneous capacity precision integration technology.The numerical results show that present method is accurate and effective.展开更多
High performance cathode for polymer electrolyte membrane fuel cell was prepared by depositing Pt nanowires in a carbon matrix coated on a substrate, and using decal transfer method to fabricate the membrane electrode...High performance cathode for polymer electrolyte membrane fuel cell was prepared by depositing Pt nanowires in a carbon matrix coated on a substrate, and using decal transfer method to fabricate the membrane electrode assembly. The effects of carbon and ionomer contents on the electrode micro-structure and fuel cell performance are investigated by physical characterization and single cell testing. The Pt nanowires are gradient distributed across the cathode thickness, and more Pt exists near the membrane. Both the carbon and ionomer contents can affect the Pt nanowires distribution and aggregation. In addition, the carbon loading dominates the transport distance of gas and proton, and the ionomer content affects the triple phase boundaries and porosity in the cathode. The optimal structure of Pt nanowire cathode is obtained at 0.10 mg·cm^-2 carbon loading and 10 wt% ionomer.展开更多
In this paper, by defining new state vectors and developing new transfer matrices of various elements mov- ing in space, the discrete time transfer matrix method of multi-rigid-flexible-body system is expanded to stud...In this paper, by defining new state vectors and developing new transfer matrices of various elements mov- ing in space, the discrete time transfer matrix method of multi-rigid-flexible-body system is expanded to study the dynamics of multibody system with flexible beams moving in space. Formulations and numerical example of a rigid- flexible-body three pendulums system moving in space are given to validate the method. Using the new method to study the dynamics of multi-rigid-flexible-body system mov- ing in space, the global dynamics equations of system are not needed, the orders of involved matrices of the system are very low and the computational speed is high, irrespec- tive of the size of the system. The new method is simple, straightforward, practical, and provides a powerful tool for multi-rigid-flexible-body system dynamics.展开更多
A multi-dimensional computational fluid dynamics(CFD) approach was proposed in this study aiming to calculate the transfer matrix of an engine exhaust muffler in the conditions with and without mean flow.The CFD model...A multi-dimensional computational fluid dynamics(CFD) approach was proposed in this study aiming to calculate the transfer matrix of an engine exhaust muffler in the conditions with and without mean flow.The CFD model of the muffler with absorptive material defined as porous zone was calibrated with the measured noise reduction without mean flow,and was further employed to study the effect of the mean flow on the acoustic performance of the muffler.Furthermore,the exhaust acoustical source was derived from the calculated transfer matrices of six different additional acoustic loads obtained by the proposed CFD approach as well as the measured tail noise based on a multiload least squares method.Finally,the exhaust noise was predicted based on Thevenin's theorem.The proposed CFD approach was suggested to be able to predict the acoustic performance of a complex muffler considering mean flow(without and with mean flow) and heat transfer,and provide reasonable results of the exhaust noise.展开更多
The hybrid dynamics of multi-rigid-body and multi-flexible-body system becomes the mainstream of multi-body dynamics.Currently there lacks a compact approach to model the hybrid dynamics,especially in modern machine t...The hybrid dynamics of multi-rigid-body and multi-flexible-body system becomes the mainstream of multi-body dynamics.Currently there lacks a compact approach to model the hybrid dynamics,especially in modern machine tool application,due to the difficulty of solving the hybrid equations or the limitation of current software when dealing with the hybrid dynamics.The extended transfer matrix method（E-TMM）,which extends elements in three-dimensional space with higher matrixes,is proposed to simplify the modeling process of the hybrid dynamics.The E-TMM modeling approaches of 3 basic elements including 3D vibrant rigid body,joint and flexible body are studied in details.A parallel mill-turn tool spindle head unit driven by dual-linear motors is chosen as a plant to demonstrate the E-TMM modeling process.By using E-TMM,the spindle head unit is simplified as a topological network consisting of the three types of element,i.e.,3D vibrant rigid body,joint and flexible body,including 11 rigid bodies,14 joints and 1 3D-Timoshenko beam.Then the dynamic model of the system can be easily obtained by deducing the element-network by means of state vector transformation.The dynamic characteristics of the spindle head,such as natural frequencies,dynamic flexibility,etc.can be predicted by solving the obtained model.Experiment verification indicates that the E-TMM is valid with enough accuracy in the dynamic analysis of the parallel mill-turn tool spindle head.The E-TMM is capable of modeling the dynamics of machine tool structure with no requirements of deducing and solving the sophisticated differential equations.Moreover,the E-TMM provides a simple and elegant tool for hybrid dynamic analysis in future dynamic design of machine tools.展开更多
The dynamic stiffness method and Transfer method is applied to study the vibration characteristics of the Euler-Bernoulli pipe conveying fluid in this paper. According to the dynamics equation of the pipe conveying fl...The dynamic stiffness method and Transfer method is applied to study the vibration characteristics of the Euler-Bernoulli pipe conveying fluid in this paper. According to the dynamics equation of the pipe conveying fluid, the element dynamic stiffness is established. The vibration characteristic of the single-span pipe is analyzed under two kinds of boundary conditions. The results compared with the literature, which has a good consistency. Based on this method, natural frequency and the critical speed of the two types of multi-span pipe are deserved. This paper shows that the dynamic stiffness method and transfer matrix is an effective method to deal with the vibration problem of pipe conveying fluid.展开更多
Rotor system supported by nonlinear bearing such as squeeze film damper(SFD)is widely used in practice owing to its wide range of damping capacity and simplicity in structure.In this paper,an improved and effective In...Rotor system supported by nonlinear bearing such as squeeze film damper(SFD)is widely used in practice owing to its wide range of damping capacity and simplicity in structure.In this paper,an improved and effective Incremental transfer matrix method(ITMM)is first presented by combining ITMM and fast Fourier transform(FFT).Afterwards this method is applied to calculate the dynamic characteristics of a Jeffcott rotor system with SFD.The convergence dificulties incurred caused by strong nonlinearities of SFD has been dealt by adopting a control factor.It is found that for the more general boundary problems where the boundary conditions are not at input and output ends of a chain system,the supplementary equation is necessarily added.Additionally,the Floquet theory is used to analyze the stability and bifurcation type of the obtained periodic solution.The semi-analytical results,including the periodic solutions of the system,the bifurcation points and their types,are in good agreement with the numerical method.Furthermore,the involution mechanism of the quasi-periodic and chaotic motions near the first-order translational mode and the second order bending mode of this system is also clarified by this method with the aid of Floquet theory.展开更多
The structure parameters of 6-degree of freedom(DOF)vibration isolation platform have a significant effect on its performance.To make the designed vibration isolation platform perform well,non-dominanted sorting genet...The structure parameters of 6-degree of freedom(DOF)vibration isolation platform have a significant effect on its performance.To make the designed vibration isolation platform perform well,non-dominanted sorting genetic algorithm version II(NSGA-II)was applied to optimize its structure based on the transfer matrix method for multibody systems.Firstly,the Jacobian matrix of 6-DOF vibration isolation platform was solved based on kinematics.Secondly,the transfer equation of 6-DOF vibration isolation system was established by the linear transfer matrix method for multibody systems.And the formula of its natural frequency was derived according to the boundary conditions of the system.Thirdly,the manipulability index was constructed based on a dimensionless Jacobian matrix.And a new performance index function was established considering the influence of dynamic isotropic and legs mass.Fourthly,genetic algorithm(GA)and NSGA-II were used to optimize the structure of the 6-DOF vibration isolation platform under the same conditions,respectively.It showed that NSGA-II had higher optimization efficiency,better calculation accuracy and shorter optimization time than that of GA.Finally,NSGA-II was adopted for multi-objective optimization design of 6-DOF vibration isolation platform based on the constraint conditions.Optimal Pareto solutions were obtained,which provides structural parameters for subsequent design work.Therefore,the proposed optimization method and the performance index in this paper provide a theoretical basis for the optimal design of relevant vibration isolation mechanism.展开更多
In consideration of the problem that the effect of conduit structure on water hammer has been ignored in the classical theory,the Poisson coupling between the fluid and the pipeline was studied and a fourteen-equation...In consideration of the problem that the effect of conduit structure on water hammer has been ignored in the classical theory,the Poisson coupling between the fluid and the pipeline was studied and a fourteen-equation mathematical model of fluid-structure interaction(FSI)was developed.Then,the transfer matrix method(TMM)was used to calculate the modal frequency,modal shape and frequency response.The results were compared with that in experiment to verify the correctness of the TMM and the results show that the fluid-structure coupling has a greater impact on the modal frequencies than the modal shape.Finally,the influence on the response spectrum of different damping ratios was studied and the results show that the natural frequency under different damping ratios has changed little but there is a big difference for the pressure spectrum.With the decreasing of damping ratio,the damping of the system on frequency spectrum is more and more significant and the dispersion and dissipation is more and more apparent.Therefore the appropriate damping ratio should be selected to minimize the effects of the vibration of the FSI.The results provide references for the theory research of FSI in the transient process.展开更多
The dynamic performance of the coupling shaft system in a carpet tufting machine is the most critical factor affecting the carpet tufting machine's efficiency,and the product quality of the tufted carpet. To deter...The dynamic performance of the coupling shaft system in a carpet tufting machine is the most critical factor affecting the carpet tufting machine's efficiency,and the product quality of the tufted carpet. To determine how to avoid resonance produced by the coupling shaft system's vibration during the weaving process,the dynamic performance of a coupling shaft system in a carpet tufting machine was analyzed. Focusing on a DHGN801D-400 carpet tufting machine,a dynamic model of coupling shaft system was established by utilizing transfer matrix methodology. On the basis of this model,the natural frequencies and mode shapes of the coupling shaft system were obtained through simulations. The correctness of the theoretical model and the dynamic performance of the coupling shaft system were validated by experiments. The first order natural frequency of the coupling shaft system was close to 600 r / min. A conclusion can thus be drawn that operating the carpet tufting machine near this speed should be avoided as much as possible.展开更多
This present paper deals with a mathematical description of linear axial and torsional vibrations. The normal and tangential stress tensor components produced by axial-torsional deformations and vibrations in the prop...This present paper deals with a mathematical description of linear axial and torsional vibrations. The normal and tangential stress tensor components produced by axial-torsional deformations and vibrations in the propeller and intermediate shafts, under the influence of propeller-induced static and variable hydrodynamic excitations are also studied. The transfer matrix method related to the constant coefficients of differential equation solutions is used. The advantage of the latter as compared with a well-known method of transfer matrix associated with state vector is the possibility of reducing the number of multiplied matrices when adjacent shaft segments have the same material properties and diameters. The results show that there is no risk of buckling and confirm that the strength of the shaft line depends on the value of the static tangential stresses which is the most important component of the stress tensor.展开更多
A ship's tail shaft has serious flexural vibration due to the cantilevered nature of the propeller's blades.Analysis of the nature frequency of flexural vibration is vital to be able to provide effective shock...A ship's tail shaft has serious flexural vibration due to the cantilevered nature of the propeller's blades.Analysis of the nature frequency of flexural vibration is vital to be able to provide effective shock absorption for a ship's tail shaft.A mathematic model of tail shaft flexural vibrations was built using the transfer matrix method.The nature frequency of flexural vibration for an electrically propelled ship's tail shaft was then analyzed,and an effective method for calculating it was proposed:a genetic algorithm(GA),which calculates the nature frequency of vibration of a system.Sample calculations,with comparisons by the Prohl method under conditions bearing isotropic support,showed this method to be practical.It should have significant impact on engineering design theory.展开更多
The transfer matrix of wrist force sensor is important for decoupling theoutput signals and enhancing the precision of wrist force sensor.This paper solves thetransfer matrix from the realization of optimal approximat...The transfer matrix of wrist force sensor is important for decoupling theoutput signals and enhancing the precision of wrist force sensor.This paper solves thetransfer matrix from the realization of optimal approximation of polynomial.First,thegeneral transfer matrix algorithm in the sense of L^2 and two kinds of modified algorithmare proposed.Then,starting from uniform approximation,the optimal transfer matrixalgorithm is offered and solved by the use of linear programming.The results of experi-ment and computation prove that these algorithms are effective.展开更多
A general method based on Riccati transfer matrix is presented to calculate the 2nd order perturbations of eigendatas for one_dimensional structural system with parameter uncertainties. The method is applicable to bot...A general method based on Riccati transfer matrix is presented to calculate the 2nd order perturbations of eigendatas for one_dimensional structural system with parameter uncertainties. The method is applicable to both real and complex eigendatas of any one_dimensional structural system. The formulas for calculating the sensitivity derivatives of eigendatas based on this method are also presented. The method is applied to the perturbation analysis for the eigendatas of a rotor with gyroscopic moment, and the differences between the perturbation results and the accurate calculating results are small.展开更多
In this paper, the analytical transfer matrix method （ATMM） is applied to study the properties of quantum reflection in three systems： a sech2 barrier, a ramp potential and an inverse harmonic oscillator. Our resul...In this paper, the analytical transfer matrix method （ATMM） is applied to study the properties of quantum reflection in three systems： a sech2 barrier, a ramp potential and an inverse harmonic oscillator. Our results agree with those obtained by Landau and Lifshitz [Landau L D and Lifshitz E M 1977 Quantum Mechanics （Non-relativistic Theory） （New York： Pergamon）], which proves that ATMM is a simple and effective method for quantum reflection.展开更多
A detailed procedure based on an analytical transfer matrix method is presented to solve bound-state problems. The derivation is strict and complete. The energy eigenvalues for an arbitrary one-dimensional potential c...A detailed procedure based on an analytical transfer matrix method is presented to solve bound-state problems. The derivation is strict and complete. The energy eigenvalues for an arbitrary one-dimensional potential can be obtained by the method. The anharmonic oscillator potential and the rational potential are two important examples. Checked by numerical techniques, the results for the two potentials by the present method are proven to be exact and reliable.展开更多
By employing the elastic and elastic plastic finite element method(FEM), the effects of matrix feature on the stress transfer mechanisms of short fiber composites are studied. In the calculation, the variations in ma...By employing the elastic and elastic plastic finite element method(FEM), the effects of matrix feature on the stress transfer mechanisms of short fiber composites are studied. In the calculation, the variations in matrix modulus, yield strength and hardening modulus are considered. It is concluded that large deformation of matrix is harmful to the improvement of the mechanical performances of the composites.展开更多
We study the eigenvalues of the rotating Morse potential by using the quantization condition from the analytical transfer matrix（ATM） method.A hierarchy of supersymmetric partner potentials is obtained with Pekeris ...We study the eigenvalues of the rotating Morse potential by using the quantization condition from the analytical transfer matrix（ATM） method.A hierarchy of supersymmetric partner potentials is obtained with Pekeris approximation,which can be used to calculate the energies of higher rotational states from the energies of lower states.The energies of rotational states of the hydrogen molecule are calculated by the ATM condition,and comparison of the results with those from the hypervirial perturbation method reveals that the accuracy of the approximate expression of Pekeris for the eigenvalues of the rotating Morse potential can be improved substantially in the framework of supersymmetric quantum mechanics.展开更多
In this paper, the effects of interface properties on the stress transfer between matrix and fiber in short fiber reinforced metal matrix composites (SFRMMCs) is studied with the method of the elasto plastic finite ...In this paper, the effects of interface properties on the stress transfer between matrix and fiber in short fiber reinforced metal matrix composites (SFRMMCs) is studied with the method of the elasto plastic finite element. The interface properties include Young’s modulus, thickness and elasto plastic performances. In the calculation an interfacial layer with given thickness is introduced into the single fiber model. It is shown that, for a soft interface, the variation in interfacial properties influences the stress transfer greatly.展开更多
基金supported by the Research Fund for the Doctoral Program of Higher Education of China(Grants 20113219110025,20133219110037)the National Natural Science Foundation of China(Grants 11102089,61304137)the Program for New Century Excellent Talents in University(NCET-10-0075)
文摘The analysis of natural vibration characteristics has become one of important steps of the manufacture and dynamic design in the aerospace industry. This paper presents a new scenario called virtual cutting in the context of the transfer matrix method of linear multibody systems closed- loop topology for computing the free vibration characteristics of elastically coupled flexible launch vehicle boosters. In this approach, the coupled system is idealized as a triple-beam system-like structure coupled by linear translational springs, where a non-uniform free-free Euler-Bemoulli beam is used. A large thrust-to-weight ratio leads to large axial accelera- tions that result in an axial inertia load distribution from nose to tail. Consequently, it causes the development of significant compressive forces along the length of the launch vehicle. Therefore, it is important to take into account this effect in the transverse vibration model. This scenario does not need the global dynamics equations of a system, and it has high computational efficiency and low memory requirements. The validity of the presented scenario is achieved through com- parison to other approaches published in the literature.
基金supported by the National Natural Science Foundation of China (No.10662003)Educational Commission of Guangxi Province of China (No.200807MS109)
文摘The first order differential matrix equations of the host shell and constrained layer for a sandwich rotational shell are derived based on the thin shell theory.Employing the layer wise principle and first order shear deformation theory, only considering the shearing deformation of the viscoelastic layer, the integrated first order differential matrix equation of a passive constrained layer damping rotational shell is established by combining with the normal equilibrium equation of the viscoelastic layer.A highly precise transfer matrix method is developed by extended homogeneous capacity precision integration technology.The numerical results show that present method is accurate and effective.
文摘High performance cathode for polymer electrolyte membrane fuel cell was prepared by depositing Pt nanowires in a carbon matrix coated on a substrate, and using decal transfer method to fabricate the membrane electrode assembly. The effects of carbon and ionomer contents on the electrode micro-structure and fuel cell performance are investigated by physical characterization and single cell testing. The Pt nanowires are gradient distributed across the cathode thickness, and more Pt exists near the membrane. Both the carbon and ionomer contents can affect the Pt nanowires distribution and aggregation. In addition, the carbon loading dominates the transport distance of gas and proton, and the ionomer content affects the triple phase boundaries and porosity in the cathode. The optimal structure of Pt nanowire cathode is obtained at 0.10 mg·cm^-2 carbon loading and 10 wt% ionomer.
基金supported by the Natural Science Foundation of China Government (10902051)the Natural Science Foundation of Jiangsu Province (BK2008046)the German Science Foundation
文摘In this paper, by defining new state vectors and developing new transfer matrices of various elements mov- ing in space, the discrete time transfer matrix method of multi-rigid-flexible-body system is expanded to study the dynamics of multibody system with flexible beams moving in space. Formulations and numerical example of a rigid- flexible-body three pendulums system moving in space are given to validate the method. Using the new method to study the dynamics of multi-rigid-flexible-body system mov- ing in space, the global dynamics equations of system are not needed, the orders of involved matrices of the system are very low and the computational speed is high, irrespec- tive of the size of the system. The new method is simple, straightforward, practical, and provides a powerful tool for multi-rigid-flexible-body system dynamics.
文摘A multi-dimensional computational fluid dynamics(CFD) approach was proposed in this study aiming to calculate the transfer matrix of an engine exhaust muffler in the conditions with and without mean flow.The CFD model of the muffler with absorptive material defined as porous zone was calibrated with the measured noise reduction without mean flow,and was further employed to study the effect of the mean flow on the acoustic performance of the muffler.Furthermore,the exhaust acoustical source was derived from the calculated transfer matrices of six different additional acoustic loads obtained by the proposed CFD approach as well as the measured tail noise based on a multiload least squares method.Finally,the exhaust noise was predicted based on Thevenin's theorem.The proposed CFD approach was suggested to be able to predict the acoustic performance of a complex muffler considering mean flow(without and with mean flow) and heat transfer,and provide reasonable results of the exhaust noise.
基金supported by National Key Technology R&D Program of China (Grant No. 2006BAF01B09)the Research Fund for Doctoral Program of Higher Education of China (Grant No. 200800060010)
文摘The hybrid dynamics of multi-rigid-body and multi-flexible-body system becomes the mainstream of multi-body dynamics.Currently there lacks a compact approach to model the hybrid dynamics,especially in modern machine tool application,due to the difficulty of solving the hybrid equations or the limitation of current software when dealing with the hybrid dynamics.The extended transfer matrix method（E-TMM）,which extends elements in three-dimensional space with higher matrixes,is proposed to simplify the modeling process of the hybrid dynamics.The E-TMM modeling approaches of 3 basic elements including 3D vibrant rigid body,joint and flexible body are studied in details.A parallel mill-turn tool spindle head unit driven by dual-linear motors is chosen as a plant to demonstrate the E-TMM modeling process.By using E-TMM,the spindle head unit is simplified as a topological network consisting of the three types of element,i.e.,3D vibrant rigid body,joint and flexible body,including 11 rigid bodies,14 joints and 1 3D-Timoshenko beam.Then the dynamic model of the system can be easily obtained by deducing the element-network by means of state vector transformation.The dynamic characteristics of the spindle head,such as natural frequencies,dynamic flexibility,etc.can be predicted by solving the obtained model.Experiment verification indicates that the E-TMM is valid with enough accuracy in the dynamic analysis of the parallel mill-turn tool spindle head.The E-TMM is capable of modeling the dynamics of machine tool structure with no requirements of deducing and solving the sophisticated differential equations.Moreover,the E-TMM provides a simple and elegant tool for hybrid dynamic analysis in future dynamic design of machine tools.
文摘The dynamic stiffness method and Transfer method is applied to study the vibration characteristics of the Euler-Bernoulli pipe conveying fluid in this paper. According to the dynamics equation of the pipe conveying fluid, the element dynamic stiffness is established. The vibration characteristic of the single-span pipe is analyzed under two kinds of boundary conditions. The results compared with the literature, which has a good consistency. Based on this method, natural frequency and the critical speed of the two types of multi-span pipe are deserved. This paper shows that the dynamic stiffness method and transfer matrix is an effective method to deal with the vibration problem of pipe conveying fluid.
文摘Rotor system supported by nonlinear bearing such as squeeze film damper(SFD)is widely used in practice owing to its wide range of damping capacity and simplicity in structure.In this paper,an improved and effective Incremental transfer matrix method(ITMM)is first presented by combining ITMM and fast Fourier transform(FFT).Afterwards this method is applied to calculate the dynamic characteristics of a Jeffcott rotor system with SFD.The convergence dificulties incurred caused by strong nonlinearities of SFD has been dealt by adopting a control factor.It is found that for the more general boundary problems where the boundary conditions are not at input and output ends of a chain system,the supplementary equation is necessarily added.Additionally,the Floquet theory is used to analyze the stability and bifurcation type of the obtained periodic solution.The semi-analytical results,including the periodic solutions of the system,the bifurcation points and their types,are in good agreement with the numerical method.Furthermore,the involution mechanism of the quasi-periodic and chaotic motions near the first-order translational mode and the second order bending mode of this system is also clarified by this method with the aid of Floquet theory.
基金supported by the National Natural Science Foundation of China(Grant 51975298)the Natural Science Foundation of Jiangsu Province(Grant BK20181301)the National Science Foundation of China(Grant 11874303).
文摘The structure parameters of 6-degree of freedom(DOF)vibration isolation platform have a significant effect on its performance.To make the designed vibration isolation platform perform well,non-dominanted sorting genetic algorithm version II(NSGA-II)was applied to optimize its structure based on the transfer matrix method for multibody systems.Firstly,the Jacobian matrix of 6-DOF vibration isolation platform was solved based on kinematics.Secondly,the transfer equation of 6-DOF vibration isolation system was established by the linear transfer matrix method for multibody systems.And the formula of its natural frequency was derived according to the boundary conditions of the system.Thirdly,the manipulability index was constructed based on a dimensionless Jacobian matrix.And a new performance index function was established considering the influence of dynamic isotropic and legs mass.Fourthly,genetic algorithm(GA)and NSGA-II were used to optimize the structure of the 6-DOF vibration isolation platform under the same conditions,respectively.It showed that NSGA-II had higher optimization efficiency,better calculation accuracy and shorter optimization time than that of GA.Finally,NSGA-II was adopted for multi-objective optimization design of 6-DOF vibration isolation platform based on the constraint conditions.Optimal Pareto solutions were obtained,which provides structural parameters for subsequent design work.Therefore,the proposed optimization method and the performance index in this paper provide a theoretical basis for the optimal design of relevant vibration isolation mechanism.
文摘In consideration of the problem that the effect of conduit structure on water hammer has been ignored in the classical theory,the Poisson coupling between the fluid and the pipeline was studied and a fourteen-equation mathematical model of fluid-structure interaction(FSI)was developed.Then,the transfer matrix method(TMM)was used to calculate the modal frequency,modal shape and frequency response.The results were compared with that in experiment to verify the correctness of the TMM and the results show that the fluid-structure coupling has a greater impact on the modal frequencies than the modal shape.Finally,the influence on the response spectrum of different damping ratios was studied and the results show that the natural frequency under different damping ratios has changed little but there is a big difference for the pressure spectrum.With the decreasing of damping ratio,the damping of the system on frequency spectrum is more and more significant and the dispersion and dissipation is more and more apparent.Therefore the appropriate damping ratio should be selected to minimize the effects of the vibration of the FSI.The results provide references for the theory research of FSI in the transient process.
基金National Natural Science Foundation of China(No.51175075)the Research and Innovation Project of Shanghai Municipal Education Commission,China(No.15ZZ034)
文摘The dynamic performance of the coupling shaft system in a carpet tufting machine is the most critical factor affecting the carpet tufting machine's efficiency,and the product quality of the tufted carpet. To determine how to avoid resonance produced by the coupling shaft system's vibration during the weaving process,the dynamic performance of a coupling shaft system in a carpet tufting machine was analyzed. Focusing on a DHGN801D-400 carpet tufting machine,a dynamic model of coupling shaft system was established by utilizing transfer matrix methodology. On the basis of this model,the natural frequencies and mode shapes of the coupling shaft system were obtained through simulations. The correctness of the theoretical model and the dynamic performance of the coupling shaft system were validated by experiments. The first order natural frequency of the coupling shaft system was close to 600 r / min. A conclusion can thus be drawn that operating the carpet tufting machine near this speed should be avoided as much as possible.
文摘This present paper deals with a mathematical description of linear axial and torsional vibrations. The normal and tangential stress tensor components produced by axial-torsional deformations and vibrations in the propeller and intermediate shafts, under the influence of propeller-induced static and variable hydrodynamic excitations are also studied. The transfer matrix method related to the constant coefficients of differential equation solutions is used. The advantage of the latter as compared with a well-known method of transfer matrix associated with state vector is the possibility of reducing the number of multiplied matrices when adjacent shaft segments have the same material properties and diameters. The results show that there is no risk of buckling and confirm that the strength of the shaft line depends on the value of the static tangential stresses which is the most important component of the stress tensor.
基金the National Natural Science Foundation under Grant No.50675162
文摘A ship's tail shaft has serious flexural vibration due to the cantilevered nature of the propeller's blades.Analysis of the nature frequency of flexural vibration is vital to be able to provide effective shock absorption for a ship's tail shaft.A mathematic model of tail shaft flexural vibrations was built using the transfer matrix method.The nature frequency of flexural vibration for an electrically propelled ship's tail shaft was then analyzed,and an effective method for calculating it was proposed:a genetic algorithm(GA),which calculates the nature frequency of vibration of a system.Sample calculations,with comparisons by the Prohl method under conditions bearing isotropic support,showed this method to be practical.It should have significant impact on engineering design theory.
文摘The transfer matrix of wrist force sensor is important for decoupling theoutput signals and enhancing the precision of wrist force sensor.This paper solves thetransfer matrix from the realization of optimal approximation of polynomial.First,thegeneral transfer matrix algorithm in the sense of L^2 and two kinds of modified algorithmare proposed.Then,starting from uniform approximation,the optimal transfer matrixalgorithm is offered and solved by the use of linear programming.The results of experi-ment and computation prove that these algorithms are effective.
文摘A general method based on Riccati transfer matrix is presented to calculate the 2nd order perturbations of eigendatas for one_dimensional structural system with parameter uncertainties. The method is applicable to both real and complex eigendatas of any one_dimensional structural system. The formulas for calculating the sensitivity derivatives of eigendatas based on this method are also presented. The method is applied to the perturbation analysis for the eigendatas of a rotor with gyroscopic moment, and the differences between the perturbation results and the accurate calculating results are small.
基金Project supported by Science Foundation of Nantong University (Grant Nos. 03080122 and 09ZY001)
文摘In this paper, the analytical transfer matrix method （ATMM） is applied to study the properties of quantum reflection in three systems： a sech2 barrier, a ramp potential and an inverse harmonic oscillator. Our results agree with those obtained by Landau and Lifshitz [Landau L D and Lifshitz E M 1977 Quantum Mechanics （Non-relativistic Theory） （New York： Pergamon）], which proves that ATMM is a simple and effective method for quantum reflection.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60877055 and 60806041)the Shanghai Rising-Star Program,China (Grant No. 08QA14030)+1 种基金the Innovation Funds for Graduates of Shanghai University,China (Grant No. SHUCX092021)the Foundation of the Science and Technology Commission of Shanghai Municipality,China (Grant No. 08JC14097)
文摘A detailed procedure based on an analytical transfer matrix method is presented to solve bound-state problems. The derivation is strict and complete. The energy eigenvalues for an arbitrary one-dimensional potential can be obtained by the method. The anharmonic oscillator potential and the rational potential are two important examples. Checked by numerical techniques, the results for the two potentials by the present method are proven to be exact and reliable.
文摘By employing the elastic and elastic plastic finite element method(FEM), the effects of matrix feature on the stress transfer mechanisms of short fiber composites are studied. In the calculation, the variations in matrix modulus, yield strength and hardening modulus are considered. It is concluded that large deformation of matrix is harmful to the improvement of the mechanical performances of the composites.
基金Project supported by the Fund from the Science and Technology Committee of Shanghai Municipality,China (Grant No. 11ZR1412300)the National Natural Science Foundation of China (Grant No. 61108010)
文摘We study the eigenvalues of the rotating Morse potential by using the quantization condition from the analytical transfer matrix（ATM） method.A hierarchy of supersymmetric partner potentials is obtained with Pekeris approximation,which can be used to calculate the energies of higher rotational states from the energies of lower states.The energies of rotational states of the hydrogen molecule are calculated by the ATM condition,and comparison of the results with those from the hypervirial perturbation method reveals that the accuracy of the approximate expression of Pekeris for the eigenvalues of the rotating Morse potential can be improved substantially in the framework of supersymmetric quantum mechanics.
文摘In this paper, the effects of interface properties on the stress transfer between matrix and fiber in short fiber reinforced metal matrix composites (SFRMMCs) is studied with the method of the elasto plastic finite element. The interface properties include Young’s modulus, thickness and elasto plastic performances. In the calculation an interfacial layer with given thickness is introduced into the single fiber model. It is shown that, for a soft interface, the variation in interfacial properties influences the stress transfer greatly.
