Prolonged exposure to n-butanol, a common hazardous volatile organic compound(VOC) in the environment, can lead to a broad range of adverse health effects. Therefore, detecting n-butanol safely and efficiently at low ...Prolonged exposure to n-butanol, a common hazardous volatile organic compound(VOC) in the environment, can lead to a broad range of adverse health effects. Therefore, detecting n-butanol safely and efficiently at low concentrations becomes critical for both environmental monitoring and human health. In this study, a novel Eu/Ce-codoped MOF-ZnO gas sensor was developed for the sensitive detection of n-butanol gas under ultraviolet activation at ambient temperature. A series of Eu/Ce-ZnO nanomaterials were synthesized via a simple co-precipitation route, by carefully designing the varied mass ratios of Eu and Ce incorporated into pristine ZnO derived from MOF precursors. The gas testing results revealed that introducing an appropriate amount of Eu and Ce would enlarge the specific surface area and enrich the oxygen vacancy content compared to pristine MOF-ZnO. Upon UV irradiation, the 0.03 wt% Eu 0.04 wt% Ce-ZnO sensor achieved a superior response of 611 for100 ppm n-butanol at room temperature, 15.28 times higher than that of pristine MOF-ZnO(40). Furthermore, the sensor presented rapid response/recovery times(15 s/28 s) and excellent selectivity. The above contributions pave the way for the promising development of highly sensitive, ultraviolet-enhanced gas sensors for ambient temperature detection of VOCs.展开更多
Catalytic oxidation of biomass-derived 5-hydroxymethylfurfural(HMF)to 2,5-furandicarboxylic acid(FDCA,an alternative bioplastic monomer to petroleum-derived terephthalic acid),has been identified as an important bioma...Catalytic oxidation of biomass-derived 5-hydroxymethylfurfural(HMF)to 2,5-furandicarboxylic acid(FDCA,an alternative bioplastic monomer to petroleum-derived terephthalic acid),has been identified as an important biomass conversion reaction in bio-based polyester industry.However,it is still challenging to acquire a high FDCA yield from the selective oxidation of HMF at low temperatures.Herein,a ternary metal-based catalyst was prepared by loading AuPdPt noble metal nanoparticles on the oxygen-rich vacancy titanium dioxide layer deposited on natural clay mineral halloysite nanotubes(HNTs),and the catalytic activity was examined for air-oxidation of HMF to FDCA in water at ambient temperature(30℃).By adjusting the Au/Pd/Pt ratio,a 93.6%FDCA yield was achieved with the optimal Au_(0.5)Pd_(0.2)Pt_(0.3)/TiO_(2)@HNTs catalyst,which revealed an impressive FDCA formation rate of 67.58 mmol g^(-1)h^(-1)and an excellent TOF value of 17.54 h^(-1)under normal air pressure at 30℃,surpassing the performance of mono-and bimetallic-based catalysts.Theoretical calculation and catalytic performance study clarified the structure-activity relationship.It was found that the ternary metal and oxygen vacancies revealing synergistic enhancement of ambient temperature catalyzed HMF air-oxidation via electronic structure tuning and adsorption intensification.DFT and kinetics study demonstrated that the presence of ternary metal significantly improved the adsorption capacity of substrate and enhanced the rate-determining step of the key intermediate 5-hydroxymethyl-2-furanocarboxylic acid(HMFCA)oxidation when compared to mono-and bimetal.Additionally,the TiO_(2)@HNTs support with high oxygen vacancy concentration facilitated the adsorption of oxygen,synergistically working with the ternary metal to activate and low the energy barriers for the generation of superoxide radical,thus enhancing the FDCA formation.This work offers a novel strategy for designing ternary metal-based catalysts for low-energy catalytic oxidation reactions.展开更多
BACKGROUND To investigate whether seasonal differences in ambient temperature affect the incidence of early postoperative cognitive dysfunction(POCD)among elderly patients undergoing laparoscopic surgery in tropical r...BACKGROUND To investigate whether seasonal differences in ambient temperature affect the incidence of early postoperative cognitive dysfunction(POCD)among elderly patients undergoing laparoscopic surgery in tropical regions.Additionally,it explored the perioperative risk factors associated with early POCD following abdominal laparoscopic surgery.AIM To investigate the influence of seasonal differences in ambient temperature on POCD of elderly patients METHODS A total of 125 patients aged≥65 years from Hainan Province,China,who underwent laparoscopic surgery under general anesthesia with tracheal intubation,were enrolled. All patients completed the Mini-Mental State Examination one day before surgery and onpostoperative days 1, 3, and 7. A decline of ≥ 2 points from baseline was considered indicative of cognitivedysfunction. Serum levels of S100 calcium binding protein B and neuron-specific enolase were measured usingenzyme-linked immunosorbent assay at three time points: Preoperatively, immediately after extubation, and 24hours postoperatively. Perioperative clinical data were collected to identify potential risk factors for POCD.Propensity score matching (PSM) was performed (1:1, caliper = 0.03), resulting in 41 matched patient pairs betweenwinter and summer groups.RESULTSAfter PSM, baseline characteristics including age, gender, body mass index, education level, comorbidities, andsurgical variables were well balanced between groups. There were no significant differences in the incidence ofPOCD on postoperative days 1, 3, and 7 between patients undergoing laparoscopic surgery in winter vs summer.However, multivariable logistic regression revealed that surgical duration (day 1, P value = 0.049), advanced ageand elevated creatinine (day 3, P value = 0.044, P value = 0.008), and hypoalbuminemia (day 3, P value = 0.042;day7, P value = 0.015) were independently associated with early POCD.CONCLUSIONAmbient temperature differences between winter and summer in tropical regions did not significantly affect theincidence of early POCD in elderly patients undergoing laparoscopic surgery. Nonetheless, age, longer surgicalduration, elevated creatinine, and hypoalbuminemia emerged as key risk factors. These findings underscore theimportance of perioperative optimization to reduce the risk of POCD in elderly patients, regardless of seasonaltemperature variations.展开更多
Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external...Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external factor affecting graft formation.However,the molecular mechanism by which external ambient temperature affects tomato graft formation remains unclear.In this study,we demonstrated that elevating ambient temperature during grafting to 35℃ for more than 24 h after grafting accelerated vascular reconnection.We generated self-or heterografted combinations between phyB1B2 and pif4 loss-of-function mutant and wild-type plants,and were mutants unresponsive to graft formation at elevated ambient temperature.In addition,elevated ambient temperature induced SlPIF4 expression during grafting.SlPIF4 directly binds the promoters of auxin biosynthesis genes SlYUCCAs and activates their expression.Further investigation revealed auxin accumulation in the graft junction under elevated ambient temperature.The results illuminate the mechanism by which the PHYB-PIF4-auxin module promotes tomato graft formation in response to elevated ambient temperature.展开更多
Silica aerogel has broad applications in the field of high-temperature thermal insulation due to its low density,low thermal conductivity and high stability.However,its thermal insulation performance deteriorates sign...Silica aerogel has broad applications in the field of high-temperature thermal insulation due to its low density,low thermal conductivity and high stability.However,its thermal insulation performance deteriorates significantly at elevated temperatures exceeding 600℃,primarily due to the collapse of pore structure.Meanwhile,the shielding capacity of SiO_(2) aerogel to the infrared radiation at high temperature is rather low due to the intrinsic properties of SiO_(2).Herein,a strategy for improving the high-temperature stability and infrared shielding properties of SiO_(2) aerogel via Ca doping was explored.Calcium-doped silica aerogel(CSA)powders were prepared by Sol-Gel,hydrothermal,and ambient pressure drying(APD)techniques using water glass and anhydrous calcium chloride as precursors and trimethylchlorosilane as a hydrophobic modifier.The effects of Ca/Si molar ratio in the precursor and hydrothermal conditions(temperature and pH)on the crystalline properties,microscopic morphology and pore structure of CSAs were investigated.The results show that the Ca/Si molar ratio and hydrothermal treatment have significant effects on the microstructure and heat resistance of CSAs in the temperature range of 400-1000℃.The samples sintered at 1000℃have a high specific surface area of 100.1 m^(2)/g and a pore volume of 0.8705 cm^(3)/g,indicating that the CSA has good heat resistance.One-side insulation tests at temperatures up to 600℃show that the sample with a Ca/Si molar ratio of 1.0 has the best insulation performance,with a cold surface temperature of 450℃,which is 27℃lower than that of the pure silica aerogel.展开更多
Bismuth-doped antimony tungstate(Bi-doped Sb_(2)WO_(6))microspheres were synthesized via a novel hydrothermal synthesis approach.These microspheres were then used as active layers in gas sensors for the detection of c...Bismuth-doped antimony tungstate(Bi-doped Sb_(2)WO_(6))microspheres were synthesized via a novel hydrothermal synthesis approach.These microspheres were then used as active layers in gas sensors for the detection of carbon dioxide(CO_(2)),a significant greenhouse gas and a critical parameter for evaluating air quality.The incorporation of bismuth significantly enhances the gas-sensing performance of the Sb_(2)WO_(6)microspheres,with the 4%Bidoped sensing active layer achieving a remarkable response value of 15 when exposed to 200 ppm of CO_(2),outperforming the undoped Sb_(2)WO_(6).Furthermore,the selectivity of the 4%Bi-Sb_(2)WO_(6)sensor toward CO_(2)gas was enhanced relative to the Sb_(2)WO_(6)sensor.The fundamental mechanisms of gas sensing and the factors contributing to the improved CO_(2)response of 4%Bi-Sb_(2)WO_(6)micro spheres were investigated using density functional theory.Bi-doped Sb_(2)WO_(6)materials exhibit significant advantages in gas-sensing applications,including improved conductivity,enhanced gas adsorption capacity,increased reaction rates,good chemical stability,excellent selectivity,and the ability to adjust electron density.These characteristics enable Bi-doped Sb_(2)WO_(6)to demonstrate higher sensitivity and rapid response capabilities in gas sensors,making it suitable for practical applications.展开更多
Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materi...Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.展开更多
Lin Wei is a hiking enthusiast.At six o'clock on the last Saturday morning,the temperature at the foot of the mountain was only 2℃,so she put on her thickest fleece jacket.However,after only half an hour of climb...Lin Wei is a hiking enthusiast.At six o'clock on the last Saturday morning,the temperature at the foot of the mountain was only 2℃,so she put on her thickest fleece jacket.However,after only half an hour of climbing,the heat left her drenched in sweat,making her feel very cold.By midday,the temperature was approaching 20℃,and her heavy jacket had to be tied around her waist,becoming a burden during her hike.This outdoor adventure allowed her to appreciate the beautiful scenery,but also subjected her to repeated changes in temperature.展开更多
The Urumqi foreland thrust tectonic belt exhibits complex geological structures and strong seismicity.Imaging its shallow crustal structure is of great significance for understanding its tectonic mechanism and seismog...The Urumqi foreland thrust tectonic belt exhibits complex geological structures and strong seismicity.Imaging its shallow crustal structure is of great significance for understanding its tectonic mechanism and seismogenic environment.We obtained a high-resolution S-wave velocity model of the shallow crust at depths of 0–8 km using ambient noise tomography applied to data from a dense seismic array.Sediments are generally thinner in the southeast and thicker in the northwest,with a maximum thickness of more than 8 km.Variations in the velocity structure near the Xishan,Wanyaogou,and Yamalike faults indicate that their formation was related to differences in the physical properties on either side of the fault.In addition,the faults exhibit thrusting of the low-velocity sides towards the high-velocity sides.In the study area,earthquakes rarely occur at depths of less than 3 km and are mostly concentrated in the high-velocity zone in the southern part.Below 3 km depth,more earthquakes were observed,mainly distributed near faults or in relatively high-velocity areas in the southern part.This suggests that high-velocity structures are more prone to stress accumulation,resulting in earthquakes.At 6–8 km depth,the densely distributed earthquakes in the northwestern part of the Bogda mountains are well-aligned with the northwest-oriented low-velocity zone observed in this study,suggesting that this weak zone likely controls seismicity in this area.展开更多
In recent years,the research on superconductivity in one-dimensional(1D)materials has been attracting increasing attention due to its potential applications in low-dimensional nanodevices.However,the critical temperat...In recent years,the research on superconductivity in one-dimensional(1D)materials has been attracting increasing attention due to its potential applications in low-dimensional nanodevices.However,the critical temperature(T_(c))of 1D superconductors is low.In this work,we theoretically investigate the possible high T_(c) superconductivity of(5,5)carbon nanotube(CNT).The pristine(5,5)CNT is a Dirac semimetal and can be modulated into a semiconductor by full hydrogenation.Interestingly,by further hole doping,it can be regulated into a metallic state with the sp^(3)-hybridized σ electrons metalized,and a giant Kohn anomaly appears in the optical phonons.The two factors together enhance the electron–phonon coupling,and lead to high-T_(c) superconductivity.When the hole doping concentration of hydrogenated-(5,5)CNT is 2.5 hole/cell,the calculated T_(c) is 82.3 K,exceeding the boiling point of liquid nitrogen.Therefore,the predicted hole-doped hydrogenated-(5,5)CNT provides a new platform for 1D high-T_(c) superconductivity and may have potential applications in 1D nanodevices.展开更多
Spikelet filling characteristics in early-season rice in southern China may be distinctive due to its exposure to high temperatures during the ripening period.However,limited information is currently available on thes...Spikelet filling characteristics in early-season rice in southern China may be distinctive due to its exposure to high temperatures during the ripening period.However,limited information is currently available on these characteristics.This study aimed to characterize spikelet filling in early-season rice and identify the key factors contributing to its improvement.Field experiments were conducted over two years(2021 and 2022)to mainly investigate the proportions of fully-filled,partially-filled,and empty spikelets,along with the biomass-fertilized spikelet ratio and harvest index,in 11 early-season rice varieties.The results revealed significant varietal variation in spikelet filling,with the proportion of fully-filled spikelets ranging from 60.6%to 81.1%in 2021 and from 66.3%to 79.2%in 2022.Among the 11 varieties,Liangyou 42,Lingliangyou 942,and Liangyou 287 exhibited relatively superior performance in spikelet filling.Linear regression revealed that,although a significant negative relationship existed between the proportion of fully-filled spikelets and both partially-filled and empty spikelets,the relationship with partially-filled spikelets was stronger.Additionally,the proportion of fully-filled spikelets showed a significant positive relationship with the harvest index but not with the biomass-fertilized spikelet ratio.These findings indicate that increasing the harvest index and reducing the occurrence of partially-filled grains are essential strategies for improving spikelet filling in early-season rice.展开更多
When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.Howe...When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.However,the key to the efficiency and return on investment of this hybrid energy system lies in the expected lifetime of the SOEC.This study assessed Ni-YSZ|YSZ|GDC|LSC fuel electrode support cells’long-term stability during electrolysis at 650℃with a current density of−0.5Acm^(−2)over 1818 h.The average voltage degradation rate of 2.63%kh^(−1)unfolded in two phases:an initial rapid decay(90 to 1120 h at 3.58%kh^(−1))and a stable decay(1120 to 1818 h at 2.14%kh^(−1)),emphasizing SOECs’probability coupling with nuclear reactors at 650℃.Post-1818-hour electrolysis revealed nickel particle formation associated with Ni(OH)_(x)diffusion and re-deposition,alongside a strontium-containing layer causing interface cracking.Despite minimal strontium segregation in the EDS,XPS data indicated surface segregation of Sr.This study provides crucial insights into prolonged SOEC operation,highlighting both its potential and challenges.展开更多
Following over 20 years of research,a direct measurement of the QGP temperature has been achieved at Relativistic Heavy-Ion Collider(RHIC),free from the blue-shift effect and contamination from strong interactions.Thi...Following over 20 years of research,a direct measurement of the QGP temperature has been achieved at Relativistic Heavy-Ion Collider(RHIC),free from the blue-shift effect and contamination from strong interactions.This viewpoint discusses a recent measurement of the QGP temperature at different stages at the Solenoidal Tracker at RHIC(STAR),which used e^(+)e^(-)pairs as penetrating probes.展开更多
This investigation utilizes non-equilibrium molecular dynamics(NEMD)simulations to explore shockinduced spallation in single-crystal tantalumacross shock velocities of 0.75–4 km/s and initial temperatures from300 to ...This investigation utilizes non-equilibrium molecular dynamics(NEMD)simulations to explore shockinduced spallation in single-crystal tantalumacross shock velocities of 0.75–4 km/s and initial temperatures from300 to 2000 K.Two spallation modes emerge:classical spallation for shock velocity below 1.5 km/s,with solid-state reversible Body-Centered Cubic(BCC)to Face-Centered Cubic(FCC)orHexagonal Close-Packed(HCP)phase transformations and discrete void nucleation-coalescence;micro-spallation for shock velocity above 3.0 km/s,featuring complete shock-induced melting and fragmentation,with a transitional regime(2.0-2.5 km/s)of partial melting.Spall strength decreases monotonically with temperature due to thermal softening.Elevated temperatures delay void nucleation but increase density,expanding spall regions and enhancing structural disorder with reduced BCC recovery.For microspallation,melting exacerbates damage,causing smaller voids and intensified atomic ejection,which increases with temperature.Free surface velocity profiles indicate damage:in classical spallation,first drop marks nucleation,and pullback signals spall layers.In micro-spallation,the first drop is irrelevant,but remains valid.Temperature delays pullback signals and weakens Hugoniot Elastic Limit.This study clarifies temperature-shock coupling in Ta spallation,aiding failure prediction in high-temperature shock environments.展开更多
The glass transition temperature(T_(g))of styrene-butadiene rubber(SBR)is a key parameter determining its low-temperature flexibility and processing performance.Accurate prediction of T_(g)is crucial formaterial desig...The glass transition temperature(T_(g))of styrene-butadiene rubber(SBR)is a key parameter determining its low-temperature flexibility and processing performance.Accurate prediction of T_(g)is crucial formaterial design and application optimisation.Addressing the limitations of traditional experimental measurements and theoretical models in terms of efficiency,cost,and accuracy,this study proposes a machine learning prediction framework that integrates multi-model ensemble and Bayesian optimization by constructing a multi-component feature dataset and algorithm optimization strategy.Based on the constructed high-quality dataset containing 96 SBR samples,ninemachine learning models were employed to predict the T_(g)of SBR and compare their prediction performance.Ultimately,aGPR-XGBoost mixed model was constructed through model ensemble,achieving high-precision prediction with R^(2)values greater than 0.9 on both the training and test sets.Further feature attribution and local effect analysis were conducted using feature analysis methods such as SHAP and ALE,revealing the nonlinear influence patterns of various components on T_(g),providing a theoretical basis for SBR formulation design and T_(g)regulation.The machine learning prediction framework established in this study combines high-precision prediction with interpretability,significantly enhancing the prediction performance of the T_(g)of SBR.It offers an efficient tool for SBR molecular design and holds great potential for promotion and application.展开更多
Root-zone temperature(RZT)strongly affects plant growth,nutrient uptake and tolerance to environmental stress,making its regulation a key challenge in greenhouse cultivation in cold climates.This study aimed to assess...Root-zone temperature(RZT)strongly affects plant growth,nutrient uptake and tolerance to environmental stress,making its regulation a key challenge in greenhouse cultivation in cold climates.This study aimed to assess the potential of passive techniques,namely black polyethylene mulch and row covers,for modifying RZT dynamics in lettuce(Lactuca sativa L.)production and to evaluate the predictive performance of the eXtreme Gradient Boosting(XGBoost)algorithm.Experiments were conducted in Iğdır,Türkiye,over a 61-day period,with soil temperature continuously monitored at depths of 1-30 cm under mulched and non-mulched conditions,alongside measurements of greenhouse air temperature both with and without row covers.The application of row covers increased internal air temperature by 5.8℃,while mulching raised RZT by 0.6-1.3℃,with effects diminishing at deeper layers.XGBoost modeling achieved high predictive accuracy,with RMSE values of 0.150-0.189◦C and R^(2)values above 0.99,and feature-importance analysis indicated that neighboring soil depths were the strongest predictors of RZT.These findings show that integrating row covers and mulching can stabilize the root-zone microclimate without active heating.The XGBoost model provides a robust tool for forecasting soil temperature and supports sustainable greenhouse production in cold regions.展开更多
This study presents a numerical investigation of the transient relaxation dynamics of a near-critical CO_(2)droplet immersed in a warmer supercritical environment composed of the same fluid.Three thermodynamic regimes...This study presents a numerical investigation of the transient relaxation dynamics of a near-critical CO_(2)droplet immersed in a warmer supercritical environment composed of the same fluid.Three thermodynamic regimes were analysed:quasi-critical(T_(r)=1.01,P_(r)=1.01),transitional(T_(r)=2.01,P_(r)=1.01),and deep supercritical(T_(r)=5.01,P_(r)=3.01).Theevolution of density,temperature,and velocity fieldswas examined to characterize the internal structure and stability of the interfacial transition layer.The evolution of density,temperature,and velocity fields highlights the competition between thermal diffusion,compressibility,andmass confinement in shaping the stability of the interfacial transition layer.Near the critical point,strong gradients and flux discontinuities emerge,consistent with known instabilities,whereas higher reduced conditions promote homogenization and stabilized transport.In the deep supercritical regime,smooth and nearly uniform fields indicate robust thermal stability.The model is validated against prior studies on droplet evaporation under supercritical and trans-critical conditions.Beyond theoretical insights,the results underline practical implications for advanced propulsion,heat transfer,and evaporation systems as well as for safe CO_(2)supercritical storage and extraction processes in energy,aerospace,pharmaceutical,and materials industries.展开更多
For red pear,the anthocyanin content is a crucial factor determining the fruit skin color,which affects consumer preferences.Low overnight temperatures promote anthocyanin accumulation,but the molecular mechanism resp...For red pear,the anthocyanin content is a crucial factor determining the fruit skin color,which affects consumer preferences.Low overnight temperatures promote anthocyanin accumulation,but the molecular mechanism responsible is unclear.In this study,‘Hongzaosu’pear(Pyrus pyrifolia×Pyrus communis)fruit were treated with a low nighttime temperature(LNT,16℃)or a warm nighttime temperature(WNT,26℃),with sampling conducted within two diurnal cycles.The results showed that LNT promoted anthocyanin accumulation in the fruit skin.The structural anthocyanin biosynthetic genes PpCHS,PpF3H,and PpUFGT exhibited a rhythmic increase in expression at night under LNT.To examine the underlying mechanism,RNA sequencing was conducted using pear calli exposed to LNT and WNT for different durations(24,48,72,or 96 h).Transcriptome analysis revealed 285 differentially expressed genes(DEGs)common to all pairwise comparisons of LNT-and WNT-treated calli of‘Clapp's Favorite’(P.communis)at the sampling time points.KEGG pathway and gene ontology enrichment analyses indicated that the common DEGs were enriched in secondary metabolic processes and phenylpropanoid metabolic processes,which are associated with anthocyanin biosynthesis.The transcription factor PpCDF5,which was responsive to LNT,was selected for further study.Dual-luciferase assays showed that PpCDF5 activated the transcription of anthocyanin biosynthetic genes PpMYB10,PpCHS,PpF3H,PpDFR,PpANS,and PpUFGT.The yeast one-hybrid and EMSA assays demonstrated that PpCDF5 directly binds to the PpF3H promoter,which contains an AAAG motif.Overexpression of PpCDF5 in pear calli and transient overexpression in pear fruit both increased anthocyanin accumulation.The results indicate that PpCDF5 is involved in LNT-induced anthocyanin biosynthesis in pear fruit and provide insights into the molecular regulation of commercial fruit coloration.展开更多
Temperature has a substantial impact on the emission of biogenic volatile organic compounds(BVOCs).Moder-ate warm temperatures,e.g.,30–40°C,could boost plant metabolism,increasing BVOC emissions.Against the back...Temperature has a substantial impact on the emission of biogenic volatile organic compounds(BVOCs).Moder-ate warm temperatures,e.g.,30–40°C,could boost plant metabolism,increasing BVOC emissions.Against the backdrop of global warming,plants emit more BVOCs to cope with thermal stress,leading to elevated concen-trations of tropospheric ozone(O_(3))and secondary organic aerosols(SOA).In recent years,a considerable body of research has explored the interaction between tree species and BVOCs under the influence of various environ-mental factors.Although many studies have examined explored the temperature dependence of BVOC emissions in the past,few studies have conducted a comprehensive and in-depth investigation into the impacts of tempera-ture.This review summarizes the relevant studies on BVOCs in the past decade,including the main biosynthetic pathways,emission observation techniques and emission inventories,as well as how temperature affects isoprene and monoterpene emission rates and the formation of O_(3) and SOA.Our work offers a theoretical foundation and guidance for future efforts to advance the comprehension of BVOC emission characteristics and develop strategies to mitigate secondary pollution.展开更多
The effect of real-time high temperature and thermal treatment on the mechanical characteristics and crack evolution of granite with different grain sizes(i.e.,0.5 mm,0.7 mm and 1.0 mm)is investigated by numerical sim...The effect of real-time high temperature and thermal treatment on the mechanical characteristics and crack evolution of granite with different grain sizes(i.e.,0.5 mm,0.7 mm and 1.0 mm)is investigated by numerical simulation employing a grain-based model,and the impact of initial cracks on thermal-induced strengthening is also examined by integrating random cracks within the model before tests.The results revealed that thermal stress,induced by the mismatch in thermal expansion coefficient between various minerals,is the primary distinction between rock specimens in real-time high temperature and thermal treatment.With increasing temperature,the thermal stress gradually accumulates in quartz minerals under real-time high temperature but releases after thermal treatment.The high local contact force significantly affects the peak stress and crack evolution.Uniaxial compression simulation results demonstrate that progressive accumulation of thermal stress induces degradation in macroscopic peak strength and increase of microcrack density.The grain size controls the ratio of intergranular contacts to intragranular contacts,and leads to an increase in strong contact number in the intragrain and a decrease in strong contact number in the intergrain.The strengthening of uniaxial compression strength in the experiment can be well simulated by controlling the number of pre-existing initial cracks in the numerical model.Our conclusions are beneficial to a better understanding of the underlying mechanisms of thermal damage and thermal strengthening of granite for deep geological engineering.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 12304467)the China Postdoctoral Science Foundation (Grant No. 2023M732175)。
文摘Prolonged exposure to n-butanol, a common hazardous volatile organic compound(VOC) in the environment, can lead to a broad range of adverse health effects. Therefore, detecting n-butanol safely and efficiently at low concentrations becomes critical for both environmental monitoring and human health. In this study, a novel Eu/Ce-codoped MOF-ZnO gas sensor was developed for the sensitive detection of n-butanol gas under ultraviolet activation at ambient temperature. A series of Eu/Ce-ZnO nanomaterials were synthesized via a simple co-precipitation route, by carefully designing the varied mass ratios of Eu and Ce incorporated into pristine ZnO derived from MOF precursors. The gas testing results revealed that introducing an appropriate amount of Eu and Ce would enlarge the specific surface area and enrich the oxygen vacancy content compared to pristine MOF-ZnO. Upon UV irradiation, the 0.03 wt% Eu 0.04 wt% Ce-ZnO sensor achieved a superior response of 611 for100 ppm n-butanol at room temperature, 15.28 times higher than that of pristine MOF-ZnO(40). Furthermore, the sensor presented rapid response/recovery times(15 s/28 s) and excellent selectivity. The above contributions pave the way for the promising development of highly sensitive, ultraviolet-enhanced gas sensors for ambient temperature detection of VOCs.
基金supported by the National Natural Science Foundation of China(22478167,22278419)the College Students Innovative Practice Plan of Jiangsu University(202410299160Y)+2 种基金the Youth Talent Cultivation Plan of Jiangsu Universitythe Key Core Technology Research(Social Development)Foundation of Suzhou(2023ss06)Collaborative Innovation Center for Water Treatment Technology and Materials and the Special Fund of Henan Key Laboratory of Water Pollution Control and Rehabilitation Technology(CJSZ2024010).
文摘Catalytic oxidation of biomass-derived 5-hydroxymethylfurfural(HMF)to 2,5-furandicarboxylic acid(FDCA,an alternative bioplastic monomer to petroleum-derived terephthalic acid),has been identified as an important biomass conversion reaction in bio-based polyester industry.However,it is still challenging to acquire a high FDCA yield from the selective oxidation of HMF at low temperatures.Herein,a ternary metal-based catalyst was prepared by loading AuPdPt noble metal nanoparticles on the oxygen-rich vacancy titanium dioxide layer deposited on natural clay mineral halloysite nanotubes(HNTs),and the catalytic activity was examined for air-oxidation of HMF to FDCA in water at ambient temperature(30℃).By adjusting the Au/Pd/Pt ratio,a 93.6%FDCA yield was achieved with the optimal Au_(0.5)Pd_(0.2)Pt_(0.3)/TiO_(2)@HNTs catalyst,which revealed an impressive FDCA formation rate of 67.58 mmol g^(-1)h^(-1)and an excellent TOF value of 17.54 h^(-1)under normal air pressure at 30℃,surpassing the performance of mono-and bimetallic-based catalysts.Theoretical calculation and catalytic performance study clarified the structure-activity relationship.It was found that the ternary metal and oxygen vacancies revealing synergistic enhancement of ambient temperature catalyzed HMF air-oxidation via electronic structure tuning and adsorption intensification.DFT and kinetics study demonstrated that the presence of ternary metal significantly improved the adsorption capacity of substrate and enhanced the rate-determining step of the key intermediate 5-hydroxymethyl-2-furanocarboxylic acid(HMFCA)oxidation when compared to mono-and bimetal.Additionally,the TiO_(2)@HNTs support with high oxygen vacancy concentration facilitated the adsorption of oxygen,synergistically working with the ternary metal to activate and low the energy barriers for the generation of superoxide radical,thus enhancing the FDCA formation.This work offers a novel strategy for designing ternary metal-based catalysts for low-energy catalytic oxidation reactions.
文摘BACKGROUND To investigate whether seasonal differences in ambient temperature affect the incidence of early postoperative cognitive dysfunction(POCD)among elderly patients undergoing laparoscopic surgery in tropical regions.Additionally,it explored the perioperative risk factors associated with early POCD following abdominal laparoscopic surgery.AIM To investigate the influence of seasonal differences in ambient temperature on POCD of elderly patients METHODS A total of 125 patients aged≥65 years from Hainan Province,China,who underwent laparoscopic surgery under general anesthesia with tracheal intubation,were enrolled. All patients completed the Mini-Mental State Examination one day before surgery and onpostoperative days 1, 3, and 7. A decline of ≥ 2 points from baseline was considered indicative of cognitivedysfunction. Serum levels of S100 calcium binding protein B and neuron-specific enolase were measured usingenzyme-linked immunosorbent assay at three time points: Preoperatively, immediately after extubation, and 24hours postoperatively. Perioperative clinical data were collected to identify potential risk factors for POCD.Propensity score matching (PSM) was performed (1:1, caliper = 0.03), resulting in 41 matched patient pairs betweenwinter and summer groups.RESULTSAfter PSM, baseline characteristics including age, gender, body mass index, education level, comorbidities, andsurgical variables were well balanced between groups. There were no significant differences in the incidence ofPOCD on postoperative days 1, 3, and 7 between patients undergoing laparoscopic surgery in winter vs summer.However, multivariable logistic regression revealed that surgical duration (day 1, P value = 0.049), advanced ageand elevated creatinine (day 3, P value = 0.044, P value = 0.008), and hypoalbuminemia (day 3, P value = 0.042;day7, P value = 0.015) were independently associated with early POCD.CONCLUSIONAmbient temperature differences between winter and summer in tropical regions did not significantly affect theincidence of early POCD in elderly patients undergoing laparoscopic surgery. Nonetheless, age, longer surgicalduration, elevated creatinine, and hypoalbuminemia emerged as key risk factors. These findings underscore theimportance of perioperative optimization to reduce the risk of POCD in elderly patients, regardless of seasonaltemperature variations.
基金supported by China Agriculture Research System of MOF and MARA(Grant No.CARS23-B10)The Major Science and Technology Projects in Hainan Province(Grant No.ZDKJ2021005)+1 种基金Key R&D projects in Shandong Province(Grant No.LJNY202106)Central Public-interest Scientific Institution Basal Research Fund(Grant No.IVF-BRF2023006)。
文摘Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external factor affecting graft formation.However,the molecular mechanism by which external ambient temperature affects tomato graft formation remains unclear.In this study,we demonstrated that elevating ambient temperature during grafting to 35℃ for more than 24 h after grafting accelerated vascular reconnection.We generated self-or heterografted combinations between phyB1B2 and pif4 loss-of-function mutant and wild-type plants,and were mutants unresponsive to graft formation at elevated ambient temperature.In addition,elevated ambient temperature induced SlPIF4 expression during grafting.SlPIF4 directly binds the promoters of auxin biosynthesis genes SlYUCCAs and activates their expression.Further investigation revealed auxin accumulation in the graft junction under elevated ambient temperature.The results illuminate the mechanism by which the PHYB-PIF4-auxin module promotes tomato graft formation in response to elevated ambient temperature.
文摘Silica aerogel has broad applications in the field of high-temperature thermal insulation due to its low density,low thermal conductivity and high stability.However,its thermal insulation performance deteriorates significantly at elevated temperatures exceeding 600℃,primarily due to the collapse of pore structure.Meanwhile,the shielding capacity of SiO_(2) aerogel to the infrared radiation at high temperature is rather low due to the intrinsic properties of SiO_(2).Herein,a strategy for improving the high-temperature stability and infrared shielding properties of SiO_(2) aerogel via Ca doping was explored.Calcium-doped silica aerogel(CSA)powders were prepared by Sol-Gel,hydrothermal,and ambient pressure drying(APD)techniques using water glass and anhydrous calcium chloride as precursors and trimethylchlorosilane as a hydrophobic modifier.The effects of Ca/Si molar ratio in the precursor and hydrothermal conditions(temperature and pH)on the crystalline properties,microscopic morphology and pore structure of CSAs were investigated.The results show that the Ca/Si molar ratio and hydrothermal treatment have significant effects on the microstructure and heat resistance of CSAs in the temperature range of 400-1000℃.The samples sintered at 1000℃have a high specific surface area of 100.1 m^(2)/g and a pore volume of 0.8705 cm^(3)/g,indicating that the CSA has good heat resistance.One-side insulation tests at temperatures up to 600℃show that the sample with a Ca/Si molar ratio of 1.0 has the best insulation performance,with a cold surface temperature of 450℃,which is 27℃lower than that of the pure silica aerogel.
基金financially supported by the Outstanding Youth Foundation of Jiangsu Province of China(No.BK20211548)Yangzhou Science and Technology Plan Project(No.YZ2023246)+1 种基金China Scholarship Council(No.202308320445)the Postgraduate Research and Practice Innovation Program of Jiangsu Province of China(No.KYCX23_3551)
文摘Bismuth-doped antimony tungstate(Bi-doped Sb_(2)WO_(6))microspheres were synthesized via a novel hydrothermal synthesis approach.These microspheres were then used as active layers in gas sensors for the detection of carbon dioxide(CO_(2)),a significant greenhouse gas and a critical parameter for evaluating air quality.The incorporation of bismuth significantly enhances the gas-sensing performance of the Sb_(2)WO_(6)microspheres,with the 4%Bidoped sensing active layer achieving a remarkable response value of 15 when exposed to 200 ppm of CO_(2),outperforming the undoped Sb_(2)WO_(6).Furthermore,the selectivity of the 4%Bi-Sb_(2)WO_(6)sensor toward CO_(2)gas was enhanced relative to the Sb_(2)WO_(6)sensor.The fundamental mechanisms of gas sensing and the factors contributing to the improved CO_(2)response of 4%Bi-Sb_(2)WO_(6)micro spheres were investigated using density functional theory.Bi-doped Sb_(2)WO_(6)materials exhibit significant advantages in gas-sensing applications,including improved conductivity,enhanced gas adsorption capacity,increased reaction rates,good chemical stability,excellent selectivity,and the ability to adjust electron density.These characteristics enable Bi-doped Sb_(2)WO_(6)to demonstrate higher sensitivity and rapid response capabilities in gas sensors,making it suitable for practical applications.
文摘Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.
文摘Lin Wei is a hiking enthusiast.At six o'clock on the last Saturday morning,the temperature at the foot of the mountain was only 2℃,so she put on her thickest fleece jacket.However,after only half an hour of climbing,the heat left her drenched in sweat,making her feel very cold.By midday,the temperature was approaching 20℃,and her heavy jacket had to be tied around her waist,becoming a burden during her hike.This outdoor adventure allowed her to appreciate the beautiful scenery,but also subjected her to repeated changes in temperature.
基金supported by the Key Research and Development Program of the Xinjiang Uygur Autonomous Region(No.2020B03006-1)the National Natural Science Foundation of China(Nos.42304069,and 42102275).
文摘The Urumqi foreland thrust tectonic belt exhibits complex geological structures and strong seismicity.Imaging its shallow crustal structure is of great significance for understanding its tectonic mechanism and seismogenic environment.We obtained a high-resolution S-wave velocity model of the shallow crust at depths of 0–8 km using ambient noise tomography applied to data from a dense seismic array.Sediments are generally thinner in the southeast and thicker in the northwest,with a maximum thickness of more than 8 km.Variations in the velocity structure near the Xishan,Wanyaogou,and Yamalike faults indicate that their formation was related to differences in the physical properties on either side of the fault.In addition,the faults exhibit thrusting of the low-velocity sides towards the high-velocity sides.In the study area,earthquakes rarely occur at depths of less than 3 km and are mostly concentrated in the high-velocity zone in the southern part.Below 3 km depth,more earthquakes were observed,mainly distributed near faults or in relatively high-velocity areas in the southern part.This suggests that high-velocity structures are more prone to stress accumulation,resulting in earthquakes.At 6–8 km depth,the densely distributed earthquakes in the northwestern part of the Bogda mountains are well-aligned with the northwest-oriented low-velocity zone observed in this study,suggesting that this weak zone likely controls seismicity in this area.
基金supported by the National Natural Science Foundation of China (Grant Nos.12074213 and 11574108)the Major Basic Program of Natural Science Foundation of Shandong Province (Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province (Grant No.ZR2023MA082)。
文摘In recent years,the research on superconductivity in one-dimensional(1D)materials has been attracting increasing attention due to its potential applications in low-dimensional nanodevices.However,the critical temperature(T_(c))of 1D superconductors is low.In this work,we theoretically investigate the possible high T_(c) superconductivity of(5,5)carbon nanotube(CNT).The pristine(5,5)CNT is a Dirac semimetal and can be modulated into a semiconductor by full hydrogenation.Interestingly,by further hole doping,it can be regulated into a metallic state with the sp^(3)-hybridized σ electrons metalized,and a giant Kohn anomaly appears in the optical phonons.The two factors together enhance the electron–phonon coupling,and lead to high-T_(c) superconductivity.When the hole doping concentration of hydrogenated-(5,5)CNT is 2.5 hole/cell,the calculated T_(c) is 82.3 K,exceeding the boiling point of liquid nitrogen.Therefore,the predicted hole-doped hydrogenated-(5,5)CNT provides a new platform for 1D high-T_(c) superconductivity and may have potential applications in 1D nanodevices.
基金funded by the Earmarked Fund for China Agriculture Research System,grant number CARS-01-33.
文摘Spikelet filling characteristics in early-season rice in southern China may be distinctive due to its exposure to high temperatures during the ripening period.However,limited information is currently available on these characteristics.This study aimed to characterize spikelet filling in early-season rice and identify the key factors contributing to its improvement.Field experiments were conducted over two years(2021 and 2022)to mainly investigate the proportions of fully-filled,partially-filled,and empty spikelets,along with the biomass-fertilized spikelet ratio and harvest index,in 11 early-season rice varieties.The results revealed significant varietal variation in spikelet filling,with the proportion of fully-filled spikelets ranging from 60.6%to 81.1%in 2021 and from 66.3%to 79.2%in 2022.Among the 11 varieties,Liangyou 42,Lingliangyou 942,and Liangyou 287 exhibited relatively superior performance in spikelet filling.Linear regression revealed that,although a significant negative relationship existed between the proportion of fully-filled spikelets and both partially-filled and empty spikelets,the relationship with partially-filled spikelets was stronger.Additionally,the proportion of fully-filled spikelets showed a significant positive relationship with the harvest index but not with the biomass-fertilized spikelet ratio.These findings indicate that increasing the harvest index and reducing the occurrence of partially-filled grains are essential strategies for improving spikelet filling in early-season rice.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA0400000)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2021253)+1 种基金the Major Science and Technology Projects of China National Offshore Oil Corporation Limited during the 14th Five Year Plan(No.KJGG-2022-12-CCUS-030500)the Photon Science Center for Carbon Neutrality of Chinese Academy of Science.
文摘When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.However,the key to the efficiency and return on investment of this hybrid energy system lies in the expected lifetime of the SOEC.This study assessed Ni-YSZ|YSZ|GDC|LSC fuel electrode support cells’long-term stability during electrolysis at 650℃with a current density of−0.5Acm^(−2)over 1818 h.The average voltage degradation rate of 2.63%kh^(−1)unfolded in two phases:an initial rapid decay(90 to 1120 h at 3.58%kh^(−1))and a stable decay(1120 to 1818 h at 2.14%kh^(−1)),emphasizing SOECs’probability coupling with nuclear reactors at 650℃.Post-1818-hour electrolysis revealed nickel particle formation associated with Ni(OH)_(x)diffusion and re-deposition,alongside a strontium-containing layer causing interface cracking.Despite minimal strontium segregation in the EDS,XPS data indicated surface segregation of Sr.This study provides crucial insights into prolonged SOEC operation,highlighting both its potential and challenges.
文摘Following over 20 years of research,a direct measurement of the QGP temperature has been achieved at Relativistic Heavy-Ion Collider(RHIC),free from the blue-shift effect and contamination from strong interactions.This viewpoint discusses a recent measurement of the QGP temperature at different stages at the Solenoidal Tracker at RHIC(STAR),which used e^(+)e^(-)pairs as penetrating probes.
基金funded by the Changsha Municipal Natural Science Foundation(Grant No.kq2402024)Chengdu Polytechnic Scientific Research Platform(23KYPT01).
文摘This investigation utilizes non-equilibrium molecular dynamics(NEMD)simulations to explore shockinduced spallation in single-crystal tantalumacross shock velocities of 0.75–4 km/s and initial temperatures from300 to 2000 K.Two spallation modes emerge:classical spallation for shock velocity below 1.5 km/s,with solid-state reversible Body-Centered Cubic(BCC)to Face-Centered Cubic(FCC)orHexagonal Close-Packed(HCP)phase transformations and discrete void nucleation-coalescence;micro-spallation for shock velocity above 3.0 km/s,featuring complete shock-induced melting and fragmentation,with a transitional regime(2.0-2.5 km/s)of partial melting.Spall strength decreases monotonically with temperature due to thermal softening.Elevated temperatures delay void nucleation but increase density,expanding spall regions and enhancing structural disorder with reduced BCC recovery.For microspallation,melting exacerbates damage,causing smaller voids and intensified atomic ejection,which increases with temperature.Free surface velocity profiles indicate damage:in classical spallation,first drop marks nucleation,and pullback signals spall layers.In micro-spallation,the first drop is irrelevant,but remains valid.Temperature delays pullback signals and weakens Hugoniot Elastic Limit.This study clarifies temperature-shock coupling in Ta spallation,aiding failure prediction in high-temperature shock environments.
基金supported by the National Natural Science Foundation of China(grant numbers 52250357 and 52203003).
文摘The glass transition temperature(T_(g))of styrene-butadiene rubber(SBR)is a key parameter determining its low-temperature flexibility and processing performance.Accurate prediction of T_(g)is crucial formaterial design and application optimisation.Addressing the limitations of traditional experimental measurements and theoretical models in terms of efficiency,cost,and accuracy,this study proposes a machine learning prediction framework that integrates multi-model ensemble and Bayesian optimization by constructing a multi-component feature dataset and algorithm optimization strategy.Based on the constructed high-quality dataset containing 96 SBR samples,ninemachine learning models were employed to predict the T_(g)of SBR and compare their prediction performance.Ultimately,aGPR-XGBoost mixed model was constructed through model ensemble,achieving high-precision prediction with R^(2)values greater than 0.9 on both the training and test sets.Further feature attribution and local effect analysis were conducted using feature analysis methods such as SHAP and ALE,revealing the nonlinear influence patterns of various components on T_(g),providing a theoretical basis for SBR formulation design and T_(g)regulation.The machine learning prediction framework established in this study combines high-precision prediction with interpretability,significantly enhancing the prediction performance of the T_(g)of SBR.It offers an efficient tool for SBR molecular design and holds great potential for promotion and application.
文摘Root-zone temperature(RZT)strongly affects plant growth,nutrient uptake and tolerance to environmental stress,making its regulation a key challenge in greenhouse cultivation in cold climates.This study aimed to assess the potential of passive techniques,namely black polyethylene mulch and row covers,for modifying RZT dynamics in lettuce(Lactuca sativa L.)production and to evaluate the predictive performance of the eXtreme Gradient Boosting(XGBoost)algorithm.Experiments were conducted in Iğdır,Türkiye,over a 61-day period,with soil temperature continuously monitored at depths of 1-30 cm under mulched and non-mulched conditions,alongside measurements of greenhouse air temperature both with and without row covers.The application of row covers increased internal air temperature by 5.8℃,while mulching raised RZT by 0.6-1.3℃,with effects diminishing at deeper layers.XGBoost modeling achieved high predictive accuracy,with RMSE values of 0.150-0.189◦C and R^(2)values above 0.99,and feature-importance analysis indicated that neighboring soil depths were the strongest predictors of RZT.These findings show that integrating row covers and mulching can stabilize the root-zone microclimate without active heating.The XGBoost model provides a robust tool for forecasting soil temperature and supports sustainable greenhouse production in cold regions.
文摘This study presents a numerical investigation of the transient relaxation dynamics of a near-critical CO_(2)droplet immersed in a warmer supercritical environment composed of the same fluid.Three thermodynamic regimes were analysed:quasi-critical(T_(r)=1.01,P_(r)=1.01),transitional(T_(r)=2.01,P_(r)=1.01),and deep supercritical(T_(r)=5.01,P_(r)=3.01).Theevolution of density,temperature,and velocity fieldswas examined to characterize the internal structure and stability of the interfacial transition layer.The evolution of density,temperature,and velocity fields highlights the competition between thermal diffusion,compressibility,andmass confinement in shaping the stability of the interfacial transition layer.Near the critical point,strong gradients and flux discontinuities emerge,consistent with known instabilities,whereas higher reduced conditions promote homogenization and stabilized transport.In the deep supercritical regime,smooth and nearly uniform fields indicate robust thermal stability.The model is validated against prior studies on droplet evaporation under supercritical and trans-critical conditions.Beyond theoretical insights,the results underline practical implications for advanced propulsion,heat transfer,and evaporation systems as well as for safe CO_(2)supercritical storage and extraction processes in energy,aerospace,pharmaceutical,and materials industries.
基金supported by the National Natural Science Foundation of China(Grant Nos.32072545,32272639 and 32260745)Zhejiang Provincial Natural Science Foundation of China(Grant Nos.LTGN23C150009 and LY22C150003)Zhejiang University Experimental Technology Research Project(Grant No.SYBJS202217).
文摘For red pear,the anthocyanin content is a crucial factor determining the fruit skin color,which affects consumer preferences.Low overnight temperatures promote anthocyanin accumulation,but the molecular mechanism responsible is unclear.In this study,‘Hongzaosu’pear(Pyrus pyrifolia×Pyrus communis)fruit were treated with a low nighttime temperature(LNT,16℃)or a warm nighttime temperature(WNT,26℃),with sampling conducted within two diurnal cycles.The results showed that LNT promoted anthocyanin accumulation in the fruit skin.The structural anthocyanin biosynthetic genes PpCHS,PpF3H,and PpUFGT exhibited a rhythmic increase in expression at night under LNT.To examine the underlying mechanism,RNA sequencing was conducted using pear calli exposed to LNT and WNT for different durations(24,48,72,or 96 h).Transcriptome analysis revealed 285 differentially expressed genes(DEGs)common to all pairwise comparisons of LNT-and WNT-treated calli of‘Clapp's Favorite’(P.communis)at the sampling time points.KEGG pathway and gene ontology enrichment analyses indicated that the common DEGs were enriched in secondary metabolic processes and phenylpropanoid metabolic processes,which are associated with anthocyanin biosynthesis.The transcription factor PpCDF5,which was responsive to LNT,was selected for further study.Dual-luciferase assays showed that PpCDF5 activated the transcription of anthocyanin biosynthetic genes PpMYB10,PpCHS,PpF3H,PpDFR,PpANS,and PpUFGT.The yeast one-hybrid and EMSA assays demonstrated that PpCDF5 directly binds to the PpF3H promoter,which contains an AAAG motif.Overexpression of PpCDF5 in pear calli and transient overexpression in pear fruit both increased anthocyanin accumulation.The results indicate that PpCDF5 is involved in LNT-induced anthocyanin biosynthesis in pear fruit and provide insights into the molecular regulation of commercial fruit coloration.
基金supported by the National Key R&D Program of China(No.2024YFC3714200)Guangxi Key Research and Development Program,China(No.Guike AB24010074)+2 种基金the National Natural Science Foundation of China(Nos.22276099,U24A20515 and 22361162668)the Natural Science Foundation of Jiangsu Province(No.BK20240036)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX24_1529).
文摘Temperature has a substantial impact on the emission of biogenic volatile organic compounds(BVOCs).Moder-ate warm temperatures,e.g.,30–40°C,could boost plant metabolism,increasing BVOC emissions.Against the backdrop of global warming,plants emit more BVOCs to cope with thermal stress,leading to elevated concen-trations of tropospheric ozone(O_(3))and secondary organic aerosols(SOA).In recent years,a considerable body of research has explored the interaction between tree species and BVOCs under the influence of various environ-mental factors.Although many studies have examined explored the temperature dependence of BVOC emissions in the past,few studies have conducted a comprehensive and in-depth investigation into the impacts of tempera-ture.This review summarizes the relevant studies on BVOCs in the past decade,including the main biosynthetic pathways,emission observation techniques and emission inventories,as well as how temperature affects isoprene and monoterpene emission rates and the formation of O_(3) and SOA.Our work offers a theoretical foundation and guidance for future efforts to advance the comprehension of BVOC emission characteristics and develop strategies to mitigate secondary pollution.
基金Project(51879135)supported by the Taishan Scholars Program,ChinaProject(52309130)supported by the National Natural Science Foundation of China+1 种基金Project(SKLGME023003)supported by the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety,ChinaProject(2022AH051754)supported by the Natural Science Research Project of Anhui Universities,China。
文摘The effect of real-time high temperature and thermal treatment on the mechanical characteristics and crack evolution of granite with different grain sizes(i.e.,0.5 mm,0.7 mm and 1.0 mm)is investigated by numerical simulation employing a grain-based model,and the impact of initial cracks on thermal-induced strengthening is also examined by integrating random cracks within the model before tests.The results revealed that thermal stress,induced by the mismatch in thermal expansion coefficient between various minerals,is the primary distinction between rock specimens in real-time high temperature and thermal treatment.With increasing temperature,the thermal stress gradually accumulates in quartz minerals under real-time high temperature but releases after thermal treatment.The high local contact force significantly affects the peak stress and crack evolution.Uniaxial compression simulation results demonstrate that progressive accumulation of thermal stress induces degradation in macroscopic peak strength and increase of microcrack density.The grain size controls the ratio of intergranular contacts to intragranular contacts,and leads to an increase in strong contact number in the intragrain and a decrease in strong contact number in the intergrain.The strengthening of uniaxial compression strength in the experiment can be well simulated by controlling the number of pre-existing initial cracks in the numerical model.Our conclusions are beneficial to a better understanding of the underlying mechanisms of thermal damage and thermal strengthening of granite for deep geological engineering.
