Metal organic chenlical vapor deposition （AIOCVD） growth systems arc one of the. main types of equipment used for growing single crystal materials, such as GaN. To obtain fihn epitaxial materials with uniform perfor...Metal organic chenlical vapor deposition （AIOCVD） growth systems arc one of the. main types of equipment used for growing single crystal materials, such as GaN. To obtain fihn epitaxial materials with uniform performanee, the flow field and ternperature field in a GaN-MOCVD reactor are investigated by modeling and simulating. To make the simulation results more consistent with the actual situation, the gases in the reactor are considered to be compressible, making it possible to investigate the distributions of gas density and pressure in the reactor. The computational fluid dynamics method is used to stud,v the effects of inlet gas flow velocity, pressure in the reactor, rotational speed of graphite susceptor, and gases used in the growth, which has great guiding~ significance for the growth of GaN fihn materials.展开更多
The temperature prediction of the Clamp-conductor coupling zone plays a crucial role in ensuring the safe and stable operation of overhead transmission lines and optimizing the thermal stability margin of transmission...The temperature prediction of the Clamp-conductor coupling zone plays a crucial role in ensuring the safe and stable operation of overhead transmission lines and optimizing the thermal stability margin of transmission lines.While existing research in this field has thoroughly explored temperature rise prediction,the focus has been relatively narrow,either targeting conductors exclusively or focusing solely on clamps,with little attention given to the temperature rise in the conductor-clampcoupling zoneor the influenceof clamp temperatureonconductor temperature rise.Based on this,considering axial heat transfer between the clamp and the conductor,this study develops a thermal model to calculate temperature in the clamp-conductor interface zone.A Whale Optimization Algorithm(WOA)-based parameter identification method is employed to overcome challenges in determining model parameters.To validate model performance,a current-carrying temperature-rise experimental platform was designed to supply data for both model verification and parameter identification.By comparing the calculation results with the experimental data,the results show that the maximum average error does not exceed 1.4%,and the maximum error is only 2.79%,verifying the validity of the parameter identificationmethod and thermalmodel.Thiswork lays a theoretical foundation for predicting temperature distributions at clamp-conductor interfaces under realistic meteorological conditions and supports short-termdynamic capacity increases for overhead conductors,demonstrating significant practical relevance.展开更多
Using ABAQUS software and cylindrical ellipsoid and body heat sources with a peak-heat-flux- attenuation function, a finite element model of the temperature field in the laser-arc hybrid welding of 4.5-mm BW300TP wear...Using ABAQUS software and cylindrical ellipsoid and body heat sources with a peak-heat-flux- attenuation function, a finite element model of the temperature field in the laser-arc hybrid welding of 4.5-mm BW300TP wear-resistant steel is proposed. The proposed model considers convection, radiation, molten pool flow, and heat conduction effect on temperature. A comparison of the simulation and actual welding test results confirms the reliability of the model. This welding heat-process model can provide the cooling rate at any position in the heat affected zone （HAZ） and can be used as a reference for the analysis of material properties and for process optimization.展开更多
The rapid increase in Water Temperature Rivers (WTR) observed globally in recent decades and projections for the coming decades under climate change scenarios make water temperature prediction essential to assess chan...The rapid increase in Water Temperature Rivers (WTR) observed globally in recent decades and projections for the coming decades under climate change scenarios make water temperature prediction essential to assess changes in aquatic biota. Statistical models for stream temperature prediction have been widely used because they are computationally simple, involve few parameters, and because of their relatively good accuracy. However, these models have not been evaluated in Peruvian Andean rivers. This work evaluates the main water temperature statistical models from the literature and fits them with data recorded in the Ichu River experimental watershed, Huancavelica-Peru. Three well-known models were reviewed: the Stefan & Preud’homme linear regression model and the Mohseni & Stefan 3- and 4-parameter logistic regression models. Ichu river water temperatures were simulated using the SWAT (Soil and Water Assessment Tool) hydrometeorological model, which defaults to the Stefan & Preud’homme model. Modifications and adjustment of coefficients of the evaluated models were configured in the SWAT code using the “Latin Hypercube Sampling” technique. The evaluated models showed poor performance in predicting the water temperature in the Ichu River with NSE (Nash-Sutcliffe Efficiency) values ranging from -2.6 to 0.49, while the modified models showed NSE values of 0.72 in all three cases. Findings suggest that the statistical models shown in the literature should be validated for Andean rivers.展开更多
Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas c...Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas constant （Ea/R） have not been well studied yet. From the latest experiments it is shown that Ea/R obviously changes with the hydration degree without fixed form. In this paper, the relationship between hydration degree and Ea/R is studied and a new hydration exothermic model is proposed. With those achievements, the mass concrete temperature field with arbitrary boundary condition can be calculated more precisely.展开更多
For accurately forecasting the liquid steel temperature in ladle furnace （LF）, a novel temperature predic tion model based on optimally pruned Bagging combined with modified extreme learning machine （ELM） is pro p...For accurately forecasting the liquid steel temperature in ladle furnace （LF）, a novel temperature predic tion model based on optimally pruned Bagging combined with modified extreme learning machine （ELM） is pro posed. By analyzing the mechanism of LF thermal system, a thermal model with partial linear structure is obtained. Subsequently, modified ELM, named as partial linear extreme learning machine （PLELM）, is developed to estimate the unknown coefficients and undefined function of the thermal model. Finally, a pruning Bagging method is pro- posed to establish the aggregated prediction model for the sake of overcoming the limitation of individual predictor and further improving the prediction performance. In the pruning procedure, AdaBoost is adopted to modify the ag- gregation order of the original Bagging ensembles, and a novel early stopping rule is designed to terminate the aggre- gation earlier. As a result, an optimal pruned Bagging ensemble is achieved, which is able to retain Bagging＇s ro- bustness against highly influential points, reduce the storage needs as well as speed up the computing time. The pro- posed prediction model is examined by practical data, and comparisons with other methods demonstrate that the new ensemble predictor can improve prediction accuracy, and is usually consisted compactly.展开更多
Urban heat island(UHI),driving by urbanization,plays an important role in urban sustainability under climate change.However,the quantification of UHI’s response to urbanization is still challenging due to the lack of...Urban heat island(UHI),driving by urbanization,plays an important role in urban sustainability under climate change.However,the quantification of UHI’s response to urbanization is still challenging due to the lack of robust and continuous temperature and urbanization datasets and reliable quantification methods.This study proposed a framework to quantify the response of surface UHI(SUHI)to urban expansion using the annual temperate cycle model.We built a continuous annual SUHI series at the buffer level from 2003 to 2018 in the Jing-Jin-Ji region of China using MODIS land surface temperature and imperviousness derived from Landsat.We then investigated the spatiotemporal dynamic of SUHI under urban expansion and examined the underlying mechanism.Spatially,the largest SUHI interannual variations occurred in suburban areas compared to the urban center and rural areas.Temporally,the increase in SUHI under urban expansion was more significant in daytime compare to nighttime.We found that the seasonal variation of SUHI was largely affected by the seasonal variations of vegetation in rural areas and the interannual variation was mainly attributed to urban expansion in urban areas.Additionally,urban greening led to the decrease in summer daytime SHUI in central urban areas.These findings deepen the understanding of the long-term spatiotemporal dynamic of UHI and the quantitative relationship between UHI and urban expansion,providing a scientific basis for prediction and mitigation of UHI.展开更多
In order to precisely control the final temperature of molten steel in RH （Ruhrstahl Heraeus）-TOP blowing refining, the final temperature prediction models of molten steel in RH-TOP blowing refining process for Inte...In order to precisely control the final temperature of molten steel in RH （Ruhrstahl Heraeus）-TOP blowing refining, the final temperature prediction models of molten steel in RH-TOP blowing refining process for Interstitial Free （IF） steel production were established under the condition of oxygen blowing and non-oxygen blowing respec- tively. The results show that the beginning molten steel temperature of refining and the amount of added scrap were influential factors, the baking temperature in vacuum chamber was a factor that had small influence. When the model was operated, the hitting probability was above 95%（under the condition of both oxygen blowing and non-oxygen blo- wing） of prediction deviation ±10℃. The accuracy is analyzed.展开更多
A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filterin...A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filtering algorithm to effectively filter out noise and minimize interference in the measurement results.Testing conducted under normal temperature conditions has demonstrated the system's high precision performance.However,it was observed that temperature variations can affect the measurement performance.Data were collected across temperatures ranging from -20 to 70℃,and a temperature correction model was established through linear regression fitting to address this issue.The feasibility of the temperature correction model was confirmed at temperatures of -5 and 40℃,where relative errors remained below 0.1% after applying the temperature correction.The research indicates that the designed measurement system exhibits excellent temperature adaptability and high precision,making it particularly suitable for measuring weak currents.展开更多
Using a detailed, fully coupled chemistry climate model （CCM）, the effect of increasing stratospheric H20 on ozone and temperature is investigated. Different CCM time-slice runs have been performed to investigate th...Using a detailed, fully coupled chemistry climate model （CCM）, the effect of increasing stratospheric H20 on ozone and temperature is investigated. Different CCM time-slice runs have been performed to investigate the chemical and radiative impacts of an assumed 2 ppmv increase in H20. The chemical effects of this H20 increase lead to an overall decrease of the total column ozone （TCO） by ～1% in the tropics and by a maximum of 12% at southern high latitudes. At northern high latitudes, the TCO is increased by only up to 5% due to stronger transport in the Arctic. A 2-ppmv H2O increase in the model＇s radiation scheme causes a cooling of the tropical stratosphere of no more than 2 K, but a cooling of more than 4 K at high latitudes. Consequently, the TCO is increased by about 2%-6%. Increasing stratospheric H2O, therefore, cools the stratosphere both directly and indirectly, except in the polar regions where the temperature responds differently due to feedbacks between ozone and H2O changes. The combined chemical and radiative effects of increasing H2O may give rise to more cooling in the tropics and middle latitudes but less cooling in the polar stratosphere. The combined effects of H2O increases on ozone tend to offset each other, except in the Arctic stratosphere where both the radiative and chemical impacts give rise to increased ozone. The chemical and radiative effects of increasing H2O cause dynamical responses in the stratosphere with an evident hemispheric asymmetry. In terms of ozone recovery, increasing the stratospheric H2O is likely to accelerate the recovery in the northern high latitudes and delay it in the southern high latitudes. The modeled ozone recovery is more significant between 2000 ～2050 than between 2050～2100, driven mainly by the larger relative change in chlorine in the earlier period.展开更多
In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using G...In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using Gleeble-3810 thermal simulator.It is proved that the samples underwent obvious dynamic recrystallization behavior during thermal deformation by microstructure observation of deformed specimens.The size of recrystallized grains increases as the temperature improved and the strain rate decreased.Meanwhile,the net softening rate caused by dynamic recrystallization is determined based on the stress-dislocation relationship.It can be found that the value of net softening rate increases quadratically as the Z parameter decreases,and the dynamic recrystallization net softening rate of CuCrZr alloy and 35CrMo steel are calculated to be 21.9%and 29.8%,respectively.Based on the dynamic recrystallization softening effect proposed,the novel elevated temperature flow constitutive models of two different alloys are proposed,and the related parameters are well defined and solved in detail.The predicted values of the obtained models are agreed well with the experimental values.展开更多
The operating temperature of a solid oxide fuel cell (SOFC) stack is a very important parameter to be controlled, which impacts the performance of the SOFC due to thermal cycling. In this paper, an adaptive fuzzy cont...The operating temperature of a solid oxide fuel cell (SOFC) stack is a very important parameter to be controlled, which impacts the performance of the SOFC due to thermal cycling. In this paper, an adaptive fuzzy control method based on an affine nonlinear temperature model is developed to control the temperature of the SOFC within a specified range. Fuzzy logic systems are used to approximate nonlinear functions in the SOFC system and an adaptive technique is employed to construct the controller. Compared with the traditional fuzzy and proportion-integral-derivative (PID) control, the simulation results show that the designed adaptive fuzzy control method performed much better. So it is feasible to build an adaptive fuzzy controller for temperature control of the SOFC.展开更多
Melt-spun ribbons which are the important raw material for hot-deformed magnets can be prepared by single-roller melt-spinning. In order to prepare well-structured ribbons, the model of temperature field for single-ro...Melt-spun ribbons which are the important raw material for hot-deformed magnets can be prepared by single-roller melt-spinning. In order to prepare well-structured ribbons, the model of temperature field for single-roller melt-spinning process was constructed in this work. The heat conduction in this process was simplified as one dimensional heat conduction problem. It was shown by modeling that, the temperature field in the melt-spinning before solidification in this model could be described as this equa-tionT（x,t）=Tmoexp[-k（x-x0）-k2αt]＋T0. The temperatureT（x,t） of the alloy melts decreased with increased positionx and cooling timet exponentially from the wheel-free surface to the wheel-side surface. The constantk determined the decrease speed of alloy tempera-tureT（x,t）, which was proportional to the interfacial heat transfer coefficienth and the interfacial area of heat conductionA0, but in-versely proportional to the thermal conductivityK.x0 was the thickness of the alloy melt. With increasedx0, the temperature differ-ence between wheel-free surface and the wheel-side surface became larger, which would lead to larger difference in grain size. In ex-periments, the influence of melt-spinning process parameters on the temperature field model was discussed, such as cooling roller materials, wheel speed, and so on. Melt-spun ribbons prepared by single-roller melt spinning at different wheel speed were investi-gated and magnetic properties of die-upset magnets from melt-spun ribbons on different cooling roller were analyzed. The variation of grain size in the depth direction consisted with temperature field model. This model provided directions for the preparation of melt-spun ribbons with uniformly distributed fine grains, which were very necessary for producing hot-deformed magnets with high magnetic performance.展开更多
A process-oriented methodology to conduct precise evaluation temporally and spatially on temperature suitability for potato growth was applied in China. Arable lands in China were gridded with 1 km×1 km geographi...A process-oriented methodology to conduct precise evaluation temporally and spatially on temperature suitability for potato growth was applied in China. Arable lands in China were gridded with 1 km×1 km geographic units, and potential potato phenology in each unit was automatically identified in terms of the potato planting initial temperature and effective accu- mulated temperature. A temperature thermal response coefficient model was used to compute a temperature suitability value for each day of potato phenology in each geographic unit. In addition, five temperature suitability ranking methods were applied to define suitable areas： （1） upper fourth quantile, （2） median, （3） expected value＋1/4 standard deviation, （4） expected value＋1/2 standard deviation, （5） expected value＋1 standard deviation. A validation indicator was innovated to test the effectiveness of the five ranking methods. The results showed that from a strict degree point of view, the five methods sequence was as follows： 1=3〉4〉2〉5, with a and c determined as the two best ranking methods. For methods 1 and 3, the suitable potato growing area was 1 of 57.76× 10^4 km2. In addition, the suitable, areas were spatially coincident with the main potato producing counties. The study output technically supports the proposal from China＇s government that there is a large potential area to grow winter-ploughed potato in South China because the potential suitable area for growing potato is approximately 2×10^7 ha. In southeast Heilongjiang and east Jilin, where it is hilly and mountainous, there are still some potentially suitable areas for potato growing accounting for nearly 2.32×10^6 ha. The authors suggest to optimize the agricultural regionalization and layout in China and to adjust the cropping pattern structure.展开更多
A new thermal model with triangular heat flux distribution is given in high-efficiency deep grinding. The mathematical expressions are driven to calculate the surface temperature. The transient behavior of the maximum...A new thermal model with triangular heat flux distribution is given in high-efficiency deep grinding. The mathematical expressions are driven to calculate the surface temperature. The transient behavior of the maximum temperature on contact area is investigated in different grinding conditions with a J-type thermocouple. The maximum contact temperatures measured in different conditions are found to be between 1 000 ℃ and 1 500 ℃ in burn-out conditions. The experiment results show good agreement with the new thermal model.展开更多
To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they ...To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they can be separated into two categories: capacitive components and resistive components. Then, the thermal-hydraulic pseudo-bond graphs of capacitive C element and resistance R element were developed, based on the conservation of mass and energy. Subsequently, the connection rule for the pseudo-bond graph elements and the method to construct the complete thermal-hydraulic system model were proposed. On the basis of heat transfer analysis of a typical hydraulic circuit containing a piston pump, the lumped parameter mathematical model of the system was given. The good agreement between the simulation results and experimental data demonstrates the validity of the modeling method.展开更多
In this study, Land Surface Temperature(LST) and its lapse rate over the mountainous Kashmir Himalaya was estimated using MODIS data and correlated with the observed in-situ air temperature(Tair) data. Comparison betw...In this study, Land Surface Temperature(LST) and its lapse rate over the mountainous Kashmir Himalaya was estimated using MODIS data and correlated with the observed in-situ air temperature(Tair) data. Comparison between the MODIS LST and Tair showed a close agreement with the maximum error of the estimate ±1°C and the correlation coefficient >0.90. Analysis of the LST data from 2002-2012 showed an increasing trend at all the selected locations except at a site located in the southeastern part of Kashmir valley. Using the GTOPO30 DEM, MODIS LST data was used to estimate the actual temperature lapse rate(ATLR) along various transects across Kashmir Himalaya, which showed significant variations in space and time ranging from 0.3°C to 1.2°C per 100 m altitude change. This observation is at variance with the standard temperature lapse rate(STLR) of 0.65°C used universally in most of the hydrological and other land surface models. Snowmelt Runoff Model(SRM) was used to determine the efficacy of using the ATLR for simulating the stream flows in one of the glaciated and snow-covered watersheds in Kashmir. The use of ATLR in the SRM model improved the R2 between the observed and predicted streamflows from 0.92 to 0.97.It is hoped that the operational use of satellite-derived LST and ATLR shall improve the understanding and quantification of various processes related to climate, hydrology and ecosystem in the mountainous and data-scarce Himalaya where the use of temperature and ATLR are critical parameters for understanding various land surface and climate processes.展开更多
Based on conduction,convection and radiation heat transfer among the flue gas,kiln wall,and the pellet bed material,and on the basis of the coal combustion and analysis of reaction heat of pellet induration in the rot...Based on conduction,convection and radiation heat transfer among the flue gas,kiln wall,and the pellet bed material,and on the basis of the coal combustion and analysis of reaction heat of pellet induration in the rotary kiln,the temperature field model of rotary kiln was established.Using visual studio net,matlab and open source computer vision library as development tools,combining with the ActiveX data objects database technology,the temperature field simulation system for rotary kiln of iron ore oxidized pellet production was developed.Temperature distribution of pellet and flue gas in rotary kiln was dynamically displayed.展开更多
Breaking down the entire structure of a material implies severing all the bonds between its atoms either by applying work or by heat transfer. Because bond-breaking is indifferent to either means, there is a kind of e...Breaking down the entire structure of a material implies severing all the bonds between its atoms either by applying work or by heat transfer. Because bond-breaking is indifferent to either means, there is a kind of equivalence between heat energy and strain energy. Based on this equivalence, we assume the existence of a constant maximum storage of energy that includes both the strain energy and the corresponding equivalent heat energy. A temperaturedependent fracture strength model is then developed for ultrahigh temperature ceramics （UHTCs）. Model predictions for UHTCs, HfB2, TiC and ZrB2, are presented and compared with the experimental results. These predictions are found to be largely consistent with experimental results.展开更多
Temperature rise is a significant factor influencing microstructure during（α＋β） deformation of TA15 titanium alloy.An experiment was designed to explore microstructure evolution induced by temperature rise due to...Temperature rise is a significant factor influencing microstructure during（α＋β） deformation of TA15 titanium alloy.An experiment was designed to explore microstructure evolution induced by temperature rise due to deformation heat.The experiment was carried out in（α＋β） phase field at typical temperature rise rates.The microstructures of the alloy under different temperature rise rates were observed by scanning electron microscopy（SEM）.It is found that the dissolution rate of primary equiaxed a phase increases with the increase in both temperature and temperature rise rate.In the same temperature range,the higher the temperature rise rate is,the larger the final content and grain size of primary equiaxed a phase are due to less dissolution time.To quantitatively depict the evolution behavior of primary equiaxed a phase under any temperature rise rates,the dissolution kinetics of primary equiaxed a phase were well described by a diffusion model.The model predictions,including content and grain size of primary equiaxed a phase,are in good agreement with experimental observations.The work provides an important basis for the prediction and control of microstructure during hot working of titanium alloy.展开更多
基金Supported by the National Key R&D Program of China under Grant No 2016YFB0400104
文摘Metal organic chenlical vapor deposition （AIOCVD） growth systems arc one of the. main types of equipment used for growing single crystal materials, such as GaN. To obtain fihn epitaxial materials with uniform performanee, the flow field and ternperature field in a GaN-MOCVD reactor are investigated by modeling and simulating. To make the simulation results more consistent with the actual situation, the gases in the reactor are considered to be compressible, making it possible to investigate the distributions of gas density and pressure in the reactor. The computational fluid dynamics method is used to stud,v the effects of inlet gas flow velocity, pressure in the reactor, rotational speed of graphite susceptor, and gases used in the growth, which has great guiding~ significance for the growth of GaN fihn materials.
基金supported by the Technology Innovation Leading Program of Shaanxi(2024QCY-KXJ-009)the Research Plan of the EducationDepartment of Shaanxi Province(23JC028)+1 种基金supported by the National Key Laboratory of Metal Forming Technology and Heavy Equipment B2408100.W14.Key Research and Development Program of Shaanxi(2025CY-YBXM-489).
文摘The temperature prediction of the Clamp-conductor coupling zone plays a crucial role in ensuring the safe and stable operation of overhead transmission lines and optimizing the thermal stability margin of transmission lines.While existing research in this field has thoroughly explored temperature rise prediction,the focus has been relatively narrow,either targeting conductors exclusively or focusing solely on clamps,with little attention given to the temperature rise in the conductor-clampcoupling zoneor the influenceof clamp temperatureonconductor temperature rise.Based on this,considering axial heat transfer between the clamp and the conductor,this study develops a thermal model to calculate temperature in the clamp-conductor interface zone.A Whale Optimization Algorithm(WOA)-based parameter identification method is employed to overcome challenges in determining model parameters.To validate model performance,a current-carrying temperature-rise experimental platform was designed to supply data for both model verification and parameter identification.By comparing the calculation results with the experimental data,the results show that the maximum average error does not exceed 1.4%,and the maximum error is only 2.79%,verifying the validity of the parameter identificationmethod and thermalmodel.Thiswork lays a theoretical foundation for predicting temperature distributions at clamp-conductor interfaces under realistic meteorological conditions and supports short-termdynamic capacity increases for overhead conductors,demonstrating significant practical relevance.
文摘Using ABAQUS software and cylindrical ellipsoid and body heat sources with a peak-heat-flux- attenuation function, a finite element model of the temperature field in the laser-arc hybrid welding of 4.5-mm BW300TP wear-resistant steel is proposed. The proposed model considers convection, radiation, molten pool flow, and heat conduction effect on temperature. A comparison of the simulation and actual welding test results confirms the reliability of the model. This welding heat-process model can provide the cooling rate at any position in the heat affected zone （HAZ） and can be used as a reference for the analysis of material properties and for process optimization.
文摘The rapid increase in Water Temperature Rivers (WTR) observed globally in recent decades and projections for the coming decades under climate change scenarios make water temperature prediction essential to assess changes in aquatic biota. Statistical models for stream temperature prediction have been widely used because they are computationally simple, involve few parameters, and because of their relatively good accuracy. However, these models have not been evaluated in Peruvian Andean rivers. This work evaluates the main water temperature statistical models from the literature and fits them with data recorded in the Ichu River experimental watershed, Huancavelica-Peru. Three well-known models were reviewed: the Stefan & Preud’homme linear regression model and the Mohseni & Stefan 3- and 4-parameter logistic regression models. Ichu river water temperatures were simulated using the SWAT (Soil and Water Assessment Tool) hydrometeorological model, which defaults to the Stefan & Preud’homme model. Modifications and adjustment of coefficients of the evaluated models were configured in the SWAT code using the “Latin Hypercube Sampling” technique. The evaluated models showed poor performance in predicting the water temperature in the Ichu River with NSE (Nash-Sutcliffe Efficiency) values ranging from -2.6 to 0.49, while the modified models showed NSE values of 0.72 in all three cases. Findings suggest that the statistical models shown in the literature should be validated for Andean rivers.
基金Funded by the National Natural Science Foundation of China(Nos.51109071,51209219)Jiangsu Province Natural Science Foundation(No.BK2010517)
文摘Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas constant （Ea/R） have not been well studied yet. From the latest experiments it is shown that Ea/R obviously changes with the hydration degree without fixed form. In this paper, the relationship between hydration degree and Ea/R is studied and a new hydration exothermic model is proposed. With those achievements, the mass concrete temperature field with arbitrary boundary condition can be calculated more precisely.
基金Sponsored by Fundamental Research Funds for Central Universities of China(110604011,110304006)National Natural Science Foundation of China(61074098)
文摘For accurately forecasting the liquid steel temperature in ladle furnace （LF）, a novel temperature predic tion model based on optimally pruned Bagging combined with modified extreme learning machine （ELM） is pro posed. By analyzing the mechanism of LF thermal system, a thermal model with partial linear structure is obtained. Subsequently, modified ELM, named as partial linear extreme learning machine （PLELM）, is developed to estimate the unknown coefficients and undefined function of the thermal model. Finally, a pruning Bagging method is pro- posed to establish the aggregated prediction model for the sake of overcoming the limitation of individual predictor and further improving the prediction performance. In the pruning procedure, AdaBoost is adopted to modify the ag- gregation order of the original Bagging ensembles, and a novel early stopping rule is designed to terminate the aggre- gation earlier. As a result, an optimal pruned Bagging ensemble is achieved, which is able to retain Bagging＇s ro- bustness against highly influential points, reduce the storage needs as well as speed up the computing time. The pro- posed prediction model is examined by practical data, and comparisons with other methods demonstrate that the new ensemble predictor can improve prediction accuracy, and is usually consisted compactly.
基金supported by the National Science Foundation(CBET-1803920)。
文摘Urban heat island(UHI),driving by urbanization,plays an important role in urban sustainability under climate change.However,the quantification of UHI’s response to urbanization is still challenging due to the lack of robust and continuous temperature and urbanization datasets and reliable quantification methods.This study proposed a framework to quantify the response of surface UHI(SUHI)to urban expansion using the annual temperate cycle model.We built a continuous annual SUHI series at the buffer level from 2003 to 2018 in the Jing-Jin-Ji region of China using MODIS land surface temperature and imperviousness derived from Landsat.We then investigated the spatiotemporal dynamic of SUHI under urban expansion and examined the underlying mechanism.Spatially,the largest SUHI interannual variations occurred in suburban areas compared to the urban center and rural areas.Temporally,the increase in SUHI under urban expansion was more significant in daytime compare to nighttime.We found that the seasonal variation of SUHI was largely affected by the seasonal variations of vegetation in rural areas and the interannual variation was mainly attributed to urban expansion in urban areas.Additionally,urban greening led to the decrease in summer daytime SHUI in central urban areas.These findings deepen the understanding of the long-term spatiotemporal dynamic of UHI and the quantitative relationship between UHI and urban expansion,providing a scientific basis for prediction and mitigation of UHI.
基金Sponsored by National Key Technology Research and Development Program in 11th Five-Year Plan of China(2006BAE03A06)
文摘In order to precisely control the final temperature of molten steel in RH （Ruhrstahl Heraeus）-TOP blowing refining, the final temperature prediction models of molten steel in RH-TOP blowing refining process for Interstitial Free （IF） steel production were established under the condition of oxygen blowing and non-oxygen blowing respec- tively. The results show that the beginning molten steel temperature of refining and the amount of added scrap were influential factors, the baking temperature in vacuum chamber was a factor that had small influence. When the model was operated, the hitting probability was above 95%（under the condition of both oxygen blowing and non-oxygen blo- wing） of prediction deviation ±10℃. The accuracy is analyzed.
基金supported by the Youth Science Foundation of Sichuan Province(Nos.2022NSFSC1230 and 2022NSFSC1231)the Science and Technology Innovation Seedling Project of Sichuan Province(No.MZGC20230080)+1 种基金the General project of the National Natural Science Foundation of China(No.12075039)the Key project of the National Natural Science Foundation of China(No.U19A2086)。
文摘A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filtering algorithm to effectively filter out noise and minimize interference in the measurement results.Testing conducted under normal temperature conditions has demonstrated the system's high precision performance.However,it was observed that temperature variations can affect the measurement performance.Data were collected across temperatures ranging from -20 to 70℃,and a temperature correction model was established through linear regression fitting to address this issue.The feasibility of the temperature correction model was confirmed at temperatures of -5 and 40℃,where relative errors remained below 0.1% after applying the temperature correction.The research indicates that the designed measurement system exhibits excellent temperature adaptability and high precision,making it particularly suitable for measuring weak currents.
基金supported by National Natural Science Foundation of China (Grant Nos. 40575019, 40730949)the U.K. Natural Environ-ment Research Council (NERC)
文摘Using a detailed, fully coupled chemistry climate model （CCM）, the effect of increasing stratospheric H20 on ozone and temperature is investigated. Different CCM time-slice runs have been performed to investigate the chemical and radiative impacts of an assumed 2 ppmv increase in H20. The chemical effects of this H20 increase lead to an overall decrease of the total column ozone （TCO） by ～1% in the tropics and by a maximum of 12% at southern high latitudes. At northern high latitudes, the TCO is increased by only up to 5% due to stronger transport in the Arctic. A 2-ppmv H2O increase in the model＇s radiation scheme causes a cooling of the tropical stratosphere of no more than 2 K, but a cooling of more than 4 K at high latitudes. Consequently, the TCO is increased by about 2%-6%. Increasing stratospheric H2O, therefore, cools the stratosphere both directly and indirectly, except in the polar regions where the temperature responds differently due to feedbacks between ozone and H2O changes. The combined chemical and radiative effects of increasing H2O may give rise to more cooling in the tropics and middle latitudes but less cooling in the polar stratosphere. The combined effects of H2O increases on ozone tend to offset each other, except in the Arctic stratosphere where both the radiative and chemical impacts give rise to increased ozone. The chemical and radiative effects of increasing H2O cause dynamical responses in the stratosphere with an evident hemispheric asymmetry. In terms of ozone recovery, increasing the stratospheric H2O is likely to accelerate the recovery in the northern high latitudes and delay it in the southern high latitudes. The modeled ozone recovery is more significant between 2000 ～2050 than between 2050～2100, driven mainly by the larger relative change in chlorine in the earlier period.
基金Project(2019zzts525)supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(U1837207,U1637601)supported by the National Natural Science Foundation of China
文摘In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using Gleeble-3810 thermal simulator.It is proved that the samples underwent obvious dynamic recrystallization behavior during thermal deformation by microstructure observation of deformed specimens.The size of recrystallized grains increases as the temperature improved and the strain rate decreased.Meanwhile,the net softening rate caused by dynamic recrystallization is determined based on the stress-dislocation relationship.It can be found that the value of net softening rate increases quadratically as the Z parameter decreases,and the dynamic recrystallization net softening rate of CuCrZr alloy and 35CrMo steel are calculated to be 21.9%and 29.8%,respectively.Based on the dynamic recrystallization softening effect proposed,the novel elevated temperature flow constitutive models of two different alloys are proposed,and the related parameters are well defined and solved in detail.The predicted values of the obtained models are agreed well with the experimental values.
文摘The operating temperature of a solid oxide fuel cell (SOFC) stack is a very important parameter to be controlled, which impacts the performance of the SOFC due to thermal cycling. In this paper, an adaptive fuzzy control method based on an affine nonlinear temperature model is developed to control the temperature of the SOFC within a specified range. Fuzzy logic systems are used to approximate nonlinear functions in the SOFC system and an adaptive technique is employed to construct the controller. Compared with the traditional fuzzy and proportion-integral-derivative (PID) control, the simulation results show that the designed adaptive fuzzy control method performed much better. So it is feasible to build an adaptive fuzzy controller for temperature control of the SOFC.
基金Project supported by Major State Basic Research Development Program of China(2010AA03A401)the National High-tech R&D Program of China(50931001,51241009)
文摘Melt-spun ribbons which are the important raw material for hot-deformed magnets can be prepared by single-roller melt-spinning. In order to prepare well-structured ribbons, the model of temperature field for single-roller melt-spinning process was constructed in this work. The heat conduction in this process was simplified as one dimensional heat conduction problem. It was shown by modeling that, the temperature field in the melt-spinning before solidification in this model could be described as this equa-tionT（x,t）=Tmoexp[-k（x-x0）-k2αt]＋T0. The temperatureT（x,t） of the alloy melts decreased with increased positionx and cooling timet exponentially from the wheel-free surface to the wheel-side surface. The constantk determined the decrease speed of alloy tempera-tureT（x,t）, which was proportional to the interfacial heat transfer coefficienth and the interfacial area of heat conductionA0, but in-versely proportional to the thermal conductivityK.x0 was the thickness of the alloy melt. With increasedx0, the temperature differ-ence between wheel-free surface and the wheel-side surface became larger, which would lead to larger difference in grain size. In ex-periments, the influence of melt-spinning process parameters on the temperature field model was discussed, such as cooling roller materials, wheel speed, and so on. Melt-spun ribbons prepared by single-roller melt spinning at different wheel speed were investi-gated and magnetic properties of die-upset magnets from melt-spun ribbons on different cooling roller were analyzed. The variation of grain size in the depth direction consisted with temperature field model. This model provided directions for the preparation of melt-spun ribbons with uniformly distributed fine grains, which were very necessary for producing hot-deformed magnets with high magnetic performance.
基金funded by the Innovation Project Special Funding of the Chinese Academy of Agricultural Sciences(CAAS-IARRP,2017-727-1)the National Natural Science Foundation of China(41001049)
文摘A process-oriented methodology to conduct precise evaluation temporally and spatially on temperature suitability for potato growth was applied in China. Arable lands in China were gridded with 1 km×1 km geographic units, and potential potato phenology in each unit was automatically identified in terms of the potato planting initial temperature and effective accu- mulated temperature. A temperature thermal response coefficient model was used to compute a temperature suitability value for each day of potato phenology in each geographic unit. In addition, five temperature suitability ranking methods were applied to define suitable areas： （1） upper fourth quantile, （2） median, （3） expected value＋1/4 standard deviation, （4） expected value＋1/2 standard deviation, （5） expected value＋1 standard deviation. A validation indicator was innovated to test the effectiveness of the five ranking methods. The results showed that from a strict degree point of view, the five methods sequence was as follows： 1=3〉4〉2〉5, with a and c determined as the two best ranking methods. For methods 1 and 3, the suitable potato growing area was 1 of 57.76× 10^4 km2. In addition, the suitable, areas were spatially coincident with the main potato producing counties. The study output technically supports the proposal from China＇s government that there is a large potential area to grow winter-ploughed potato in South China because the potential suitable area for growing potato is approximately 2×10^7 ha. In southeast Heilongjiang and east Jilin, where it is hilly and mountainous, there are still some potentially suitable areas for potato growing accounting for nearly 2.32×10^6 ha. The authors suggest to optimize the agricultural regionalization and layout in China and to adjust the cropping pattern structure.
基金This project is supported by National Natural Science Foundation of China (No.50475052)Provincial Natural Science Foundation of Liaoning (No.20022161)Provincial Scientific Research Plan of Education Office of Uaoning(No.202223206).
文摘A new thermal model with triangular heat flux distribution is given in high-efficiency deep grinding. The mathematical expressions are driven to calculate the surface temperature. The transient behavior of the maximum temperature on contact area is investigated in different grinding conditions with a J-type thermocouple. The maximum contact temperatures measured in different conditions are found to be between 1 000 ℃ and 1 500 ℃ in burn-out conditions. The experiment results show good agreement with the new thermal model.
基金Project(51175518)supported by the National Natural Science Foundation of China
文摘To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they can be separated into two categories: capacitive components and resistive components. Then, the thermal-hydraulic pseudo-bond graphs of capacitive C element and resistance R element were developed, based on the conservation of mass and energy. Subsequently, the connection rule for the pseudo-bond graph elements and the method to construct the complete thermal-hydraulic system model were proposed. On the basis of heat transfer analysis of a typical hydraulic circuit containing a piston pump, the lumped parameter mathematical model of the system was given. The good agreement between the simulation results and experimental data demonstrates the validity of the modeling method.
基金Department of Science and Technology (DST), Government of India sponsored consortium project titled "Himalayan Cryosphere: Science and Society" and the financial assistance received from the Department under the project
文摘In this study, Land Surface Temperature(LST) and its lapse rate over the mountainous Kashmir Himalaya was estimated using MODIS data and correlated with the observed in-situ air temperature(Tair) data. Comparison between the MODIS LST and Tair showed a close agreement with the maximum error of the estimate ±1°C and the correlation coefficient >0.90. Analysis of the LST data from 2002-2012 showed an increasing trend at all the selected locations except at a site located in the southeastern part of Kashmir valley. Using the GTOPO30 DEM, MODIS LST data was used to estimate the actual temperature lapse rate(ATLR) along various transects across Kashmir Himalaya, which showed significant variations in space and time ranging from 0.3°C to 1.2°C per 100 m altitude change. This observation is at variance with the standard temperature lapse rate(STLR) of 0.65°C used universally in most of the hydrological and other land surface models. Snowmelt Runoff Model(SRM) was used to determine the efficacy of using the ATLR for simulating the stream flows in one of the glaciated and snow-covered watersheds in Kashmir. The use of ATLR in the SRM model improved the R2 between the observed and predicted streamflows from 0.92 to 0.97.It is hoped that the operational use of satellite-derived LST and ATLR shall improve the understanding and quantification of various processes related to climate, hydrology and ecosystem in the mountainous and data-scarce Himalaya where the use of temperature and ATLR are critical parameters for understanding various land surface and climate processes.
基金Sponsored by Program for New Century Excellent Talents in University of China(NCET-05-0630)
文摘Based on conduction,convection and radiation heat transfer among the flue gas,kiln wall,and the pellet bed material,and on the basis of the coal combustion and analysis of reaction heat of pellet induration in the rotary kiln,the temperature field model of rotary kiln was established.Using visual studio net,matlab and open source computer vision library as development tools,combining with the ActiveX data objects database technology,the temperature field simulation system for rotary kiln of iron ore oxidized pellet production was developed.Temperature distribution of pellet and flue gas in rotary kiln was dynamically displayed.
基金The project was supported by the National Natural Science Foundation of China （90505015 and 10702035）.
文摘Breaking down the entire structure of a material implies severing all the bonds between its atoms either by applying work or by heat transfer. Because bond-breaking is indifferent to either means, there is a kind of equivalence between heat energy and strain energy. Based on this equivalence, we assume the existence of a constant maximum storage of energy that includes both the strain energy and the corresponding equivalent heat energy. A temperaturedependent fracture strength model is then developed for ultrahigh temperature ceramics （UHTCs）. Model predictions for UHTCs, HfB2, TiC and ZrB2, are presented and compared with the experimental results. These predictions are found to be largely consistent with experimental results.
基金financially supported by the National Natural Science Foundation of China (Nos.51175427 and 51205317)the Open Fund of State Key Laboratory of Materials Processing and Die & Mould Technology of China (No.P2014-005)+1 种基金the Marie Curie International Research Staff Exchange Scheme within the 7th EC Framework Programme (FP7) (No.318968)the Programme of Introducing Talents of Discipline to Universities (No.B08040)
文摘Temperature rise is a significant factor influencing microstructure during（α＋β） deformation of TA15 titanium alloy.An experiment was designed to explore microstructure evolution induced by temperature rise due to deformation heat.The experiment was carried out in（α＋β） phase field at typical temperature rise rates.The microstructures of the alloy under different temperature rise rates were observed by scanning electron microscopy（SEM）.It is found that the dissolution rate of primary equiaxed a phase increases with the increase in both temperature and temperature rise rate.In the same temperature range,the higher the temperature rise rate is,the larger the final content and grain size of primary equiaxed a phase are due to less dissolution time.To quantitatively depict the evolution behavior of primary equiaxed a phase under any temperature rise rates,the dissolution kinetics of primary equiaxed a phase were well described by a diffusion model.The model predictions,including content and grain size of primary equiaxed a phase,are in good agreement with experimental observations.The work provides an important basis for the prediction and control of microstructure during hot working of titanium alloy.
