This paper focuses on the preparation of rare earth oxide products from rare earth chloride solutions during the rare earth extraction and separation processes,as well as the recycling of magnesium chloride solutions....This paper focuses on the preparation of rare earth oxide products from rare earth chloride solutions during the rare earth extraction and separation processes,as well as the recycling of magnesium chloride solutions.It proposes the idea of introducing spray pyrolysis technology into the rare earth extraction and separation processes.This paper briefly describes the development history of chloride spray pyrolysis technology,focusing on the research status and application progress of rare earth chloride solution and magnesium chloride solution spray pyrolysis technology,as well as spray pyrolysis equipment.The paper also analyzes the challenges and technical intricacies associated with applying spray pyrolysis technology to chloride solutions in the rare earth extraction and separation processes.Additionally,it explores future trends and proposes strategies to facilitate the full recycling of acids and bases,streamline the process flow,and enhance the prospects for green and low-carbon rare earth metallurgy.展开更多
Correction to:Nano-Micro Letters(2025)17:191 https://doi.org/10.1007/s40820-025-01702-7 Following the publication of the original article[1],the authors reported an error in Fig.3(b),and the figure legend was reversed...Correction to:Nano-Micro Letters(2025)17:191 https://doi.org/10.1007/s40820-025-01702-7 Following the publication of the original article[1],the authors reported an error in Fig.3(b),and the figure legend was reversed.The correct Fig.3 has been provided in this orrection.展开更多
A high voltage BCD process using thin epitaxial technology is developed for high voltage applications. Compared to conventional thick expitaxial technology, the thickness of the n-type epitaxial layer is reduced to 9...A high voltage BCD process using thin epitaxial technology is developed for high voltage applications. Compared to conventional thick expitaxial technology, the thickness of the n-type epitaxial layer is reduced to 9μm,and the diffusion processing time needed for forming junction isolation diffusions is substantially reduced. The isolation diffusions have a smaller lateral extent and occupy less chip area. High voltage double RESURF LD- MOS with a breakdown voltage of up to 900V,as well as low voltage CMOS and BJT,are achieved using this high voltage BCD compatible process. An experimental high voltage half bridge gate drive IC using a coupled level shift structure is also successfully implemented, and the high side floating offset voltage in the half bridge drive IC is 880V. The major features of this process for high voltage applications are also clearly demonstrated.展开更多
In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion s...In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion selective electrode method. The results showed that the fluodde contents in the 25 varieties were in the range of 181.92-345.06 mg/kg, end the fluoride content in ＇Zhongcha 302＇ was the lowest. Based on traditional production process of brick tea, 3 new low-fluoride brick tea production processes with ＇Zhongcha 302＇ as the raw material at the stage of one bud and five leaves were constructed. The fluoride content, physicochemical in- dex, sensory end main chemical contents in the brick tea samples were determined. The best processing process of Iow-fluodde brick tea was process 3, which included aldng, fixing, rolling, second fixing, second roiling, sun-drying, pile-fermentation, steaming, pile-fermentation, drying and shaping into brick by vapor treating. The re- sults showed that the fluoride content and physicochemical index of the brick tea sample of the third low-fluoride brick tea production process accorded with National Standard GB/T 9833.4-2013. The sensory evaluation of the brick tea sample was better than that of brick tea manufacture by the traditional process. The water extract, tea polyphenols, amino acids, caffeine and water-soluble sugar in the brick tea sample increased by 9.41%, 36.39%, 26.94%, 27.23% and 15.29%, respectively. Low-fluodds bdck tea could be produced by selecting low fluoride tea varieties, controlling the tondemess of fresh leaves, and optimizing the processing technique.展开更多
The present study was designed to optimize the processing of Fructus Arctii by response surface methodology （RSM）. Based on single factor studies, a three-variable, three-level Box-Behnken design （BBD） was used to...The present study was designed to optimize the processing of Fructus Arctii by response surface methodology （RSM）. Based on single factor studies, a three-variable, three-level Box-Behnken design （BBD） was used to monitor the effects of independent variables, including processing temperature and time, on the dependent variables. Response surfaces and contour plots of the contents of total lignans, chlorogenic acid, arctiin, and aretigenin were obtained through ultraviolet and visible （UV-Vis） monitoring and high performance liquid chromatography （HPLC）. Fructus Arctii should be processed under heating in a pot at 311℃, medicine at 119℃ for 123s with flipping frequently. The experimental values under the optimized processing technology were consistent with the predicted values. In conclusion, RSM is an effective method to optimize the processing of traditional Chinese medicine （TCM）.展开更多
The metallurgy industry consumes a considerable amount of coal and fossil fuels,and its carbon dioxide emissions are increasing every year.Replacing coal with renewable,carbon-neutral biomass for metallurgical product...The metallurgy industry consumes a considerable amount of coal and fossil fuels,and its carbon dioxide emissions are increasing every year.Replacing coal with renewable,carbon-neutral biomass for metallurgical production is of great significance in reducing global carbon consumption.This study describes the current state of research in biomass metallurgy in recent years and analyzes the concept and scientific principles of biomass metallurgy.The fundamentals of biomass pretreatment technology and biomass metallurgy technology were discussed,and the industrial application framework of biomass metallurgy was proposed.Furthermore,the economic and social advantages of biomass metallurgy were analyzed to serve as a reference for the advancement of fundamental theory and industrial application of biomass metallurgy.展开更多
The degradation and mineralization of aniline （AN） using ozone combined with Fenton reagent （O3/Fenton） in a rotating packed bed （RPB） was proposed in this study, and the process （RPB-O3/Fenton） was compared w...The degradation and mineralization of aniline （AN） using ozone combined with Fenton reagent （O3/Fenton） in a rotating packed bed （RPB） was proposed in this study, and the process （RPB-O3/Fenton） was compared with conventional O3/Fenton in a stirred tank reactor （STR-O3/Fenton） or single ozonation in an RPB （RPB-O3）, Effects of high gravity factor, H2O2 dosage, H2O2 dosing method and initial pH on the AN mineralization efficiency were investigated in the RPB-O3/Fenton process, In addition, the behavior of Fe（Ⅱ） was monitored at different H2O2 dosing methods and pH values. Finally, the optimal operation conditions were determined with high gravity factor of 100, initial pH of 5, Fe（Ⅱ） concentration of 0.8 mmol·L-1 and H2O2 dosage of 2.5 ml. Under these conditions, for aniline wastewater at the volume of I L and concentration of 200 mg· L- 1 ,a fast and thorough decay of AN was conducted in 10 min, and the TOC removal efficiency reached 89% in 60 min. The main intermediates of p-benzoquinone, nitrobenzene, maleic acid and oxalic acid were identified by liquid chromatography/mass spectroscopy （LC/MS）, and the degradation pathways of AN in RPB-O3/Fenton system were proposed based on experimental evidence. It could be envisioned that high-gravity technology combined with O3/Fenton processes would be promising in the rapid and efficient mineralization ofwastewater.展开更多
With in-depth development of the Internet of Things(IoT)in various industries,the informatization process of various industries has also entered the fast lane.This article aims to solve the supply chain process proble...With in-depth development of the Internet of Things(IoT)in various industries,the informatization process of various industries has also entered the fast lane.This article aims to solve the supply chain process problem in e-commerce,focusing on the specific application of Internet of Things technology in e-commerce.Warehousing logistics is an important link in today’s e-commerce transactions.This article proposes a distributed analysis method for RFID-based e-commerce warehousing process optimization and an e-commerce supply chain management process based on Internet of Things technology.This article first introduces the advantages and disadvantages of shared IoT identification technology and the IoT resource sharing platform based on the three-layer abstract data model and representational state transfer(REST)style.Combining actual IoT applications and the characteristics of an existing platform,a REST-based IoT resource sharing platform is proposed.Combined with actual projects,a REST-based IoT resource sharing platform was built,and key technology experiments were conducted for verification.Finally,optimizing the e-commerce supply chain management process under Internet of Things technology and explaining the advantages of optimized e-commerce supply chain management are discussed.Research on this subject provides a theoretical basis for the application of the Internet of Things in e-commerce and has practical significance and practical value for managing service capabilities and service levels in e-commerce.展开更多
Downstream processing or product recovery plays a vital role in the development of bioprocesses.To improve the bioprocess efficiency,some unconventional methods are much required.The continuous manufacturing in downst...Downstream processing or product recovery plays a vital role in the development of bioprocesses.To improve the bioprocess efficiency,some unconventional methods are much required.The continuous manufacturing in downstream processing makes the Process Analytical Technologies(PATs)as an important tool.Monitoring and controlling bioprocess are an essential factor for the principles of PAT and quality by design.Spectroscopic methods can apply to monitor multiple analytes in real-time with less sample processing with significant advancements.Raman spectroscopy is an extensively used technique as an analytical and research tool owing to its modest process form,non-destructive,non-invasive optical molecular spectroscopic imaging with computer-based analysis.Generally,its application is essential for the analysis and characterization of biological samples,and it is easy to operate with minimal sample.The innovation on various types of enhanced Raman spectroscopy was designed to enhance the Raman analytical technique.Raman spectroscopy could couple with chemometrics to provide reliable alternative analysis method of downstream process analysis.Thus,this review aims to provide useful insight on the application of Raman spectroscopy for PAT in downstream processing of biotechnology and Raman data analysis in biological fields.展开更多
OBJECTIVE:To evaluate the quality of Moyao(Myrrh)in the identification of the geographical origin and processing of the products.METHODS:Raw Moyao(Myrrh)and two kinds of Moyao(Myrrh)processed with vinegar from three c...OBJECTIVE:To evaluate the quality of Moyao(Myrrh)in the identification of the geographical origin and processing of the products.METHODS:Raw Moyao(Myrrh)and two kinds of Moyao(Myrrh)processed with vinegar from three countries were identified using near-infrared(NIR)spectroscopy combined with chemometric techniques.Principal component analysis(PCA)was used to reduce the dimensionality of the data and visualize the clustering of samples from different categories.A classical chemometric algorithm(PLS-DA)and two machine learning algorithms[K-nearest neighbor(KNN)and support vector machine]were used to conduct a classification analysis of the near-infrared spectra of the Moyao(Myrrh)samples,and their discriminative performance was evaluated.RESULTS:Based on the accuracy,precision,recall rate,and F1 value in each model,the results showed that the classical chemometric algorithm and the machine learning algorithm obtained positive results.In all of the chemometric analyses,the NIR spectrum of Moyao(Myrrh)preprocessed by standard normal variation or Multivariate scattering correction combined with KNN achieved the highest accuracy in identifying the geographical origins,and the accuracy of identifying the processing technology established by the KNN method after first-order derivative pretreatment was the best.The best accuracy of geographical origin discrimination and processing technology discrimination were 0.9853 and 0.9706 respectively.CONCLUSIONS:NIR spectroscopy combined with chemometric technology can be an important tool for tracking the origin and processing technology of Moyao(Myrrh)and can also provide a reference for evaluations of its quality and the clinical use.展开更多
Oil storage is a source of volatile organic compounds( VOCs). Volatile organic compounds can cause different damages to the environment,animals and plants. Therefore, it is important to control the discharge of VOCs i...Oil storage is a source of volatile organic compounds( VOCs). Volatile organic compounds can cause different damages to the environment,animals and plants. Therefore, it is important to control the discharge of VOCs in oil storage. In this paper,the control technology of sources of VOCs pollution in oil storage was analyzed from the source,process and end treatment,and measures for the prevention and control of VOCs pollution in oil storage were proposed.展开更多
Sesame seeds are promulgated as traditional high-quality edible oil crops,rich in lipid(40–65%),protein(19–35%),and bioactive compounds.The review starts with bioactive components(fatty acid,tocopherol,phytosterol,s...Sesame seeds are promulgated as traditional high-quality edible oil crops,rich in lipid(40–65%),protein(19–35%),and bioactive compounds.The review starts with bioactive components(fatty acid,tocopherol,phytosterol,sesamin,sesamolin,and sesamol)of sesame seeds.It considers processing techniques for extracting oil(aqueous extraction and pressing)from seeds.Novel technologies,such as enzyme-assisted aqueous,supercritical CO_(2),and microwave-assisted solvent extraction,are also discussed.The methods of utilization of sesame seed cake are also analyzed.In the future,the processing technology of sesame seed will be further developed in the direction of improving comprehensive utilization rate to meet new consumption demand.展开更多
Background:The herbs should be processed by different methods before use,and the efficacy and toxicity of Chinese herbal medicines may change,which may enhance efficacy and reduce toxicity after processing.Gansui(Kans...Background:The herbs should be processed by different methods before use,and the efficacy and toxicity of Chinese herbal medicines may change,which may enhance efficacy and reduce toxicity after processing.Gansui(Kansui radix)is a common clinical herbal medicine,and there are considerable changes in its toxicity and efficacy after processing.Gaocao(Glycyrrhizae radix et rhizome)has a detoxifying effect.Methods:Using the contents of euphorbiadienol and the alcohol-soluble extract of Glycyrrhizae radix-processed Kansui radix as evaluation indexes,response surface methodology was used to optimize the processing technology of Kansui radix by exploring the effects of Glycyrrhizae radix et rhizoma-addition amount,frying temperature,and frying time on the processing technology of Kansui radix.Meanwhile,response surface software was used to analyze experimental data to determine the processing parameters of Kansui radix by Glycyrrhizae radix et rhizoma.Integrative Pharmacology-based Research Platform of Traditional Chinese Medicine is used to analysis the potential ingredients of Kansui radix and verify the potential ingredients by western blotting.Results:The technology of Glycyrrhizae radix et rhizoma-processed Kansui radix was optimized for the Glycyrrhizae radix et rhizoma-addition amount of 27%,frying temperature of 180℃,and frying time of 11 min.The network pharmacology analysis revealed that Kansui radix could cause kidney,liver,and heart injury by the PI3K/AKT signaling pathway.Kansui radix at high or low dose could decrease the ratio of p-AKT/AKT while Glycyrrhizae radix et rhizoma-processed Kansui could increase it.Conclusion:The model established by response surface methodology is relatively accurate and can predict the contents of euphorbiadienol and alcohol extract of processed Kansui radix.The toxic effects and its mechanism of action of Kansui radix and processed Kansui radix on kidney,liver,and heart,from the perspective of systems biology,have provided scientific evidence to its clinical application.展开更多
The RTS technology can produce ultra-low sulfur diesel at lower costs using available hydrogenation catalyst and device.However,with the increase of the mixing proportion of secondary processed diesel fuel in the feed...The RTS technology can produce ultra-low sulfur diesel at lower costs using available hydrogenation catalyst and device.However,with the increase of the mixing proportion of secondary processed diesel fuel in the feed,the content of nitrogen compounds and polycyclic aromatic hydrocarbons in the feed increased,leading to the acceleration of the deactivation rate of the primary catalyst and the shortening of the service cycle.In order to fully understand the reason of catalyst deactivation,the effect of mixing secondary processed diesel fuel oil on the operating stability of the catalyst in the first reactor was investigated in a medium-sized fixed-bed hydrogenation unit.The results showed that the nitrogen compounds mainly affected the initial activity of the catalyst,but had little effect on the stability of the catalyst.The PAHs had little effect on the initial activity of the catalyst,but could significantly accelerate the deactivation of the catalyst.Combined with the analysis of the reason of catalyst deactivation and the study of RTS technology,the direction of RTS technology process optimization was put forward,and the stability of catalyst was improved obviously after process optimization.展开更多
At present, China’s CCUS has made a leap forward development in policy, technology, demonstration projects and commercial operation. However, from the perspective of the entire energy system, CCUS can play its role i...At present, China’s CCUS has made a leap forward development in policy, technology, demonstration projects and commercial operation. However, from the perspective of the entire energy system, CCUS can play its role in reducing CO2 only when it is combined with the process of resource exploitation, energy production, energy storage and transportation and energy utilization, which requires the research of the whole process technology of CCUS. This paper studies the source sink matching and technology integration matching in the whole process of CCUS technology, studies the application of existing coal-fired power plants + CCUS, steel plants + CCUS, cement plants + CCUS technology and the future application of BECCS technology and hydrogen energy + CCUS technology, and puts forward relevant suggestions on improving the laws, regulations and policy system for the development of CCUS, establishing a cross sectoral and cross industry cooperation platform and improving the carbon trading system.展开更多
With the rapid growth of the global population and the increasing demand for healthier diets,improving the nutrient utilization efficiency of staple food crops has become a critical scientific and industrial chal-leng...With the rapid growth of the global population and the increasing demand for healthier diets,improving the nutrient utilization efficiency of staple food crops has become a critical scientific and industrial chal-lenge,prompting innovation in food processing technologies.This review introduces first the common nutritional challenges in the processing of staple food crops,followed by the comprehensive examination of research aiming to enhance the nutritional quality of staple food crop-based foods through innovative processing technologies,including microwave(MW),pulsed electric field(PEF),ultrasound,modern fer-mentation technology,and enzyme technology.Additionally,soybean processing is used as an example to underscore the importance of integrating innovative processing technologies for optimizing nutrient utilization in staple food crops.Although these innovative processing technologies have demonstrated a significant potential to improve nutrient utilization efficiency and enhance the overall nutritional pro-file of staple food crop-based food products,their current limitations must be acknowledged and addressed in future research.Fortunately,advancements in science and technology will facilitate pro-gress in food processing,enabling both the improvement of existing techniques as well as the develop-ment of entirely novel methodologies.This work aims to enhance the understanding of food practitioners on the way processing technologies may optimize nutrient utilization,thereby fostering innovation in food processing research and synergistic multi-technological strategies,ultimately providing valuable references to address global food security challenges.展开更多
The trichlorosilane(TCS)purification process consumes a significant amount of energy to achieve the high purity requirement for TCS quality(99.9999%).This work proposed a series of energy saving technology to enhance ...The trichlorosilane(TCS)purification process consumes a significant amount of energy to achieve the high purity requirement for TCS quality(99.9999%).This work proposed a series of energy saving technology to enhance the TCS purification process,including the conventional process,the conventional process coupled with heat-pump(HP),the multi-effect distillation process,and the dividing-wall columns process.All proposed schemes have been conceptually constructed by Aspen Plus.The design and optimization of the processes have been performed by the sensitivity analysis and the response surface methodology.Moreover,the energy consumption and total annual cost(TAC)for these schemes were discussed.The simulation results show that the TAC of the conventional process coupled with the integrated heat pump can reduce 50.5%of energy consumption as compared with the conventional process;the double-effect and three-effect processes can save 15.6%and 33.8%of energy consumption,respectively;the dividing wall column process and that coupled with the heat pump process can reduce by 22.3%and 48.1%of energy consumption,respectively.It can be found that the operating cost can be saved by using the heat pump technology,while the capital cost increases due to the investment in the compressor,when the processes coupled with the heat pump are used.These results demonstrate that the conventional process coupled with the HP technology has advantages over other distillation schemes for TCS purification in terms of the energy saving and economic effects.展开更多
Development and application of new ceramic die materials is one of the important topics in the field of die research. The composition, processing technology, mechanical property and engineering performance of the cera...Development and application of new ceramic die materials is one of the important topics in the field of die research. The composition, processing technology, mechanical property and engineering performance of the ceramic materials such as cermet, ZTA, TZP, TZP/Al2O3, TZP/TiC/Al2O3, PSZ and Sialon, etc., with rare earth yttrium, lanthanum and cerium, and so on working as additives, were investigated and analyzed in the present study. Problems existed in the research and application of rare earth ceramic die materials were discussed. Rare earth additives can effectively improve the mechanical property and engineering performance of ceramic die materials. Thus, it will have further perspectives of wider application. More attention should be paid in the future to the toughening and strengthening of the ceramic die materials, the adding forms and kinds of rare earth elements and acting mechanisms of rare earth additives in ceramic die materials.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
In 2022, coinciding with the 20th anniversary of the School of Physics and Electronics at Central South University, we plan to publish the special issue “Laser processing and micro-nano technology” in the Journal of...In 2022, coinciding with the 20th anniversary of the School of Physics and Electronics at Central South University, we plan to publish the special issue “Laser processing and micro-nano technology” in the Journal of Central South University, which aims to commemorate the 20th anniversary of the school and comprehensively present the latest achievement in the fields of laser processing and micro-nano technology to domestic and foreign universities.展开更多
基金supported by the National Key Research and Development Program of China(2022YFB3504501)the National Natural Science Foundation of China(52274355)。
文摘This paper focuses on the preparation of rare earth oxide products from rare earth chloride solutions during the rare earth extraction and separation processes,as well as the recycling of magnesium chloride solutions.It proposes the idea of introducing spray pyrolysis technology into the rare earth extraction and separation processes.This paper briefly describes the development history of chloride spray pyrolysis technology,focusing on the research status and application progress of rare earth chloride solution and magnesium chloride solution spray pyrolysis technology,as well as spray pyrolysis equipment.The paper also analyzes the challenges and technical intricacies associated with applying spray pyrolysis technology to chloride solutions in the rare earth extraction and separation processes.Additionally,it explores future trends and proposes strategies to facilitate the full recycling of acids and bases,streamline the process flow,and enhance the prospects for green and low-carbon rare earth metallurgy.
基金supported in part by STI 2030-Major Projects under Grant 2022ZD0209200in part by Beijing Natural Science Foundation-Xiaomi Innovation Joint Fund (L233009)+4 种基金in part by National Natural Science Foundation of China under Grant No. 62374099in part by the Tsinghua-Toyota Joint Research Fundin part by the Daikin Tsinghua Union Programin part by Independent Research Program of School of Integrated Circuits,Tsinghua Universitysponsored by CIE-Tencent Robotics X Rhino-Bird Focused Research Program
文摘Correction to:Nano-Micro Letters(2025)17:191 https://doi.org/10.1007/s40820-025-01702-7 Following the publication of the original article[1],the authors reported an error in Fig.3(b),and the figure legend was reversed.The correct Fig.3 has been provided in this orrection.
文摘A high voltage BCD process using thin epitaxial technology is developed for high voltage applications. Compared to conventional thick expitaxial technology, the thickness of the n-type epitaxial layer is reduced to 9μm,and the diffusion processing time needed for forming junction isolation diffusions is substantially reduced. The isolation diffusions have a smaller lateral extent and occupy less chip area. High voltage double RESURF LD- MOS with a breakdown voltage of up to 900V,as well as low voltage CMOS and BJT,are achieved using this high voltage BCD compatible process. An experimental high voltage half bridge gate drive IC using a coupled level shift structure is also successfully implemented, and the high side floating offset voltage in the half bridge drive IC is 880V. The major features of this process for high voltage applications are also clearly demonstrated.
文摘In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion selective electrode method. The results showed that the fluodde contents in the 25 varieties were in the range of 181.92-345.06 mg/kg, end the fluoride content in ＇Zhongcha 302＇ was the lowest. Based on traditional production process of brick tea, 3 new low-fluoride brick tea production processes with ＇Zhongcha 302＇ as the raw material at the stage of one bud and five leaves were constructed. The fluoride content, physicochemical in- dex, sensory end main chemical contents in the brick tea samples were determined. The best processing process of Iow-fluodde brick tea was process 3, which included aldng, fixing, rolling, second fixing, second roiling, sun-drying, pile-fermentation, steaming, pile-fermentation, drying and shaping into brick by vapor treating. The re- sults showed that the fluoride content and physicochemical index of the brick tea sample of the third low-fluoride brick tea production process accorded with National Standard GB/T 9833.4-2013. The sensory evaluation of the brick tea sample was better than that of brick tea manufacture by the traditional process. The water extract, tea polyphenols, amino acids, caffeine and water-soluble sugar in the brick tea sample increased by 9.41%, 36.39%, 26.94%, 27.23% and 15.29%, respectively. Low-fluodds bdck tea could be produced by selecting low fluoride tea varieties, controlling the tondemess of fresh leaves, and optimizing the processing technique.
基金financially supported by the Natural Science Foundation of Jiangsu Province(BK2011135)Found Project for Transformation of Scientific and Technological Achievements of Jiangsu Province(No.BZ2011053)+1 种基金Open Project of National First Class Key Discipline for Science of Chinese Materia Medica,Nanjing University of Chinese Medicine(No.2011ZYX2-013)Scientific Innovation Research of University Graduate of Jiangsu Province(CXZZ130626)
文摘The present study was designed to optimize the processing of Fructus Arctii by response surface methodology （RSM）. Based on single factor studies, a three-variable, three-level Box-Behnken design （BBD） was used to monitor the effects of independent variables, including processing temperature and time, on the dependent variables. Response surfaces and contour plots of the contents of total lignans, chlorogenic acid, arctiin, and aretigenin were obtained through ultraviolet and visible （UV-Vis） monitoring and high performance liquid chromatography （HPLC）. Fructus Arctii should be processed under heating in a pot at 311℃, medicine at 119℃ for 123s with flipping frequently. The experimental values under the optimized processing technology were consistent with the predicted values. In conclusion, RSM is an effective method to optimize the processing of traditional Chinese medicine （TCM）.
基金financially supported by the National Natural Science Foundation of China(No.51704216)the State Key Laboratory of Advanced Metallurgy,University of Science and Technology Beijing(Nos.41620025,41620026,and 41621009)+1 种基金the Interdisciplinary Research Project for Young Teachers of University of ScienceTechnology Beijing(Fundamental Research Funds f or the Central Universities)(No.FRF-IDRY-20-014)。
文摘The metallurgy industry consumes a considerable amount of coal and fossil fuels,and its carbon dioxide emissions are increasing every year.Replacing coal with renewable,carbon-neutral biomass for metallurgical production is of great significance in reducing global carbon consumption.This study describes the current state of research in biomass metallurgy in recent years and analyzes the concept and scientific principles of biomass metallurgy.The fundamentals of biomass pretreatment technology and biomass metallurgy technology were discussed,and the industrial application framework of biomass metallurgy was proposed.Furthermore,the economic and social advantages of biomass metallurgy were analyzed to serve as a reference for the advancement of fundamental theory and industrial application of biomass metallurgy.
基金Supported by the National Natural Science Foundations of China(U1610106)Shanxi Excellent Talent Science and Technology Innovation Project(201705D211011)+1 种基金Specialized Research Fund for Sanjin Scholars Program of Shanxi ProvinceNorth University of China Fund for Distinguished Young Scholars
文摘The degradation and mineralization of aniline （AN） using ozone combined with Fenton reagent （O3/Fenton） in a rotating packed bed （RPB） was proposed in this study, and the process （RPB-O3/Fenton） was compared with conventional O3/Fenton in a stirred tank reactor （STR-O3/Fenton） or single ozonation in an RPB （RPB-O3）, Effects of high gravity factor, H2O2 dosage, H2O2 dosing method and initial pH on the AN mineralization efficiency were investigated in the RPB-O3/Fenton process, In addition, the behavior of Fe（Ⅱ） was monitored at different H2O2 dosing methods and pH values. Finally, the optimal operation conditions were determined with high gravity factor of 100, initial pH of 5, Fe（Ⅱ） concentration of 0.8 mmol·L-1 and H2O2 dosage of 2.5 ml. Under these conditions, for aniline wastewater at the volume of I L and concentration of 200 mg· L- 1 ,a fast and thorough decay of AN was conducted in 10 min, and the TOC removal efficiency reached 89% in 60 min. The main intermediates of p-benzoquinone, nitrobenzene, maleic acid and oxalic acid were identified by liquid chromatography/mass spectroscopy （LC/MS）, and the degradation pathways of AN in RPB-O3/Fenton system were proposed based on experimental evidence. It could be envisioned that high-gravity technology combined with O3/Fenton processes would be promising in the rapid and efficient mineralization ofwastewater.
文摘With in-depth development of the Internet of Things(IoT)in various industries,the informatization process of various industries has also entered the fast lane.This article aims to solve the supply chain process problem in e-commerce,focusing on the specific application of Internet of Things technology in e-commerce.Warehousing logistics is an important link in today’s e-commerce transactions.This article proposes a distributed analysis method for RFID-based e-commerce warehousing process optimization and an e-commerce supply chain management process based on Internet of Things technology.This article first introduces the advantages and disadvantages of shared IoT identification technology and the IoT resource sharing platform based on the three-layer abstract data model and representational state transfer(REST)style.Combining actual IoT applications and the characteristics of an existing platform,a REST-based IoT resource sharing platform is proposed.Combined with actual projects,a REST-based IoT resource sharing platform was built,and key technology experiments were conducted for verification.Finally,optimizing the e-commerce supply chain management process under Internet of Things technology and explaining the advantages of optimized e-commerce supply chain management are discussed.Research on this subject provides a theoretical basis for the application of the Internet of Things in e-commerce and has practical significance and practical value for managing service capabilities and service levels in e-commerce.
基金This work was supported by the National Natural Science Foundation of China(No.21878263,22078286)。
文摘Downstream processing or product recovery plays a vital role in the development of bioprocesses.To improve the bioprocess efficiency,some unconventional methods are much required.The continuous manufacturing in downstream processing makes the Process Analytical Technologies(PATs)as an important tool.Monitoring and controlling bioprocess are an essential factor for the principles of PAT and quality by design.Spectroscopic methods can apply to monitor multiple analytes in real-time with less sample processing with significant advancements.Raman spectroscopy is an extensively used technique as an analytical and research tool owing to its modest process form,non-destructive,non-invasive optical molecular spectroscopic imaging with computer-based analysis.Generally,its application is essential for the analysis and characterization of biological samples,and it is easy to operate with minimal sample.The innovation on various types of enhanced Raman spectroscopy was designed to enhance the Raman analytical technique.Raman spectroscopy could couple with chemometrics to provide reliable alternative analysis method of downstream process analysis.Thus,this review aims to provide useful insight on the application of Raman spectroscopy for PAT in downstream processing of biotechnology and Raman data analysis in biological fields.
基金Jiangxi Provincial Administration of Traditional Chinese Medicine Key Research Laboratory on the Fundamentals of Chinese Medicine Evidence(Gan TCM Science and Education Word[2022]No.8-4)Jiangxi University of Chinese Medicine Science and Technology Innovation Team Development Program:Traditional Chinese Medicine Constitution-State Identification Health Management Research Team(No.CXTD22016)。
文摘OBJECTIVE:To evaluate the quality of Moyao(Myrrh)in the identification of the geographical origin and processing of the products.METHODS:Raw Moyao(Myrrh)and two kinds of Moyao(Myrrh)processed with vinegar from three countries were identified using near-infrared(NIR)spectroscopy combined with chemometric techniques.Principal component analysis(PCA)was used to reduce the dimensionality of the data and visualize the clustering of samples from different categories.A classical chemometric algorithm(PLS-DA)and two machine learning algorithms[K-nearest neighbor(KNN)and support vector machine]were used to conduct a classification analysis of the near-infrared spectra of the Moyao(Myrrh)samples,and their discriminative performance was evaluated.RESULTS:Based on the accuracy,precision,recall rate,and F1 value in each model,the results showed that the classical chemometric algorithm and the machine learning algorithm obtained positive results.In all of the chemometric analyses,the NIR spectrum of Moyao(Myrrh)preprocessed by standard normal variation or Multivariate scattering correction combined with KNN achieved the highest accuracy in identifying the geographical origins,and the accuracy of identifying the processing technology established by the KNN method after first-order derivative pretreatment was the best.The best accuracy of geographical origin discrimination and processing technology discrimination were 0.9853 and 0.9706 respectively.CONCLUSIONS:NIR spectroscopy combined with chemometric technology can be an important tool for tracking the origin and processing technology of Moyao(Myrrh)and can also provide a reference for evaluations of its quality and the clinical use.
文摘Oil storage is a source of volatile organic compounds( VOCs). Volatile organic compounds can cause different damages to the environment,animals and plants. Therefore, it is important to control the discharge of VOCs in oil storage. In this paper,the control technology of sources of VOCs pollution in oil storage was analyzed from the source,process and end treatment,and measures for the prevention and control of VOCs pollution in oil storage were proposed.
基金The Agricultural Science and Technology Innovation Project of the Chinese Academy of Agricultural Sciences(CAAS-ASTIP-2016-OCRI)Wuhan Scientific and Technical Payoffs Transformation Project(2019030703011505)Earmarked Fund for China Agriculture Research System(CARS-14).
文摘Sesame seeds are promulgated as traditional high-quality edible oil crops,rich in lipid(40–65%),protein(19–35%),and bioactive compounds.The review starts with bioactive components(fatty acid,tocopherol,phytosterol,sesamin,sesamolin,and sesamol)of sesame seeds.It considers processing techniques for extracting oil(aqueous extraction and pressing)from seeds.Novel technologies,such as enzyme-assisted aqueous,supercritical CO_(2),and microwave-assisted solvent extraction,are also discussed.The methods of utilization of sesame seed cake are also analyzed.In the future,the processing technology of sesame seed will be further developed in the direction of improving comprehensive utilization rate to meet new consumption demand.
基金funded by the grants from Applied Basic Research Program of Shanxi Province(201901D111342).
文摘Background:The herbs should be processed by different methods before use,and the efficacy and toxicity of Chinese herbal medicines may change,which may enhance efficacy and reduce toxicity after processing.Gansui(Kansui radix)is a common clinical herbal medicine,and there are considerable changes in its toxicity and efficacy after processing.Gaocao(Glycyrrhizae radix et rhizome)has a detoxifying effect.Methods:Using the contents of euphorbiadienol and the alcohol-soluble extract of Glycyrrhizae radix-processed Kansui radix as evaluation indexes,response surface methodology was used to optimize the processing technology of Kansui radix by exploring the effects of Glycyrrhizae radix et rhizoma-addition amount,frying temperature,and frying time on the processing technology of Kansui radix.Meanwhile,response surface software was used to analyze experimental data to determine the processing parameters of Kansui radix by Glycyrrhizae radix et rhizoma.Integrative Pharmacology-based Research Platform of Traditional Chinese Medicine is used to analysis the potential ingredients of Kansui radix and verify the potential ingredients by western blotting.Results:The technology of Glycyrrhizae radix et rhizoma-processed Kansui radix was optimized for the Glycyrrhizae radix et rhizoma-addition amount of 27%,frying temperature of 180℃,and frying time of 11 min.The network pharmacology analysis revealed that Kansui radix could cause kidney,liver,and heart injury by the PI3K/AKT signaling pathway.Kansui radix at high or low dose could decrease the ratio of p-AKT/AKT while Glycyrrhizae radix et rhizoma-processed Kansui could increase it.Conclusion:The model established by response surface methodology is relatively accurate and can predict the contents of euphorbiadienol and alcohol extract of processed Kansui radix.The toxic effects and its mechanism of action of Kansui radix and processed Kansui radix on kidney,liver,and heart,from the perspective of systems biology,have provided scientific evidence to its clinical application.
基金This work was financially supported by the Technology Development Project of SINOPEC(121025)All of the staff in our laboratory had provided a lot of support in the analysis of oil samples and catalyst characterization.
文摘The RTS technology can produce ultra-low sulfur diesel at lower costs using available hydrogenation catalyst and device.However,with the increase of the mixing proportion of secondary processed diesel fuel in the feed,the content of nitrogen compounds and polycyclic aromatic hydrocarbons in the feed increased,leading to the acceleration of the deactivation rate of the primary catalyst and the shortening of the service cycle.In order to fully understand the reason of catalyst deactivation,the effect of mixing secondary processed diesel fuel oil on the operating stability of the catalyst in the first reactor was investigated in a medium-sized fixed-bed hydrogenation unit.The results showed that the nitrogen compounds mainly affected the initial activity of the catalyst,but had little effect on the stability of the catalyst.The PAHs had little effect on the initial activity of the catalyst,but could significantly accelerate the deactivation of the catalyst.Combined with the analysis of the reason of catalyst deactivation and the study of RTS technology,the direction of RTS technology process optimization was put forward,and the stability of catalyst was improved obviously after process optimization.
文摘At present, China’s CCUS has made a leap forward development in policy, technology, demonstration projects and commercial operation. However, from the perspective of the entire energy system, CCUS can play its role in reducing CO2 only when it is combined with the process of resource exploitation, energy production, energy storage and transportation and energy utilization, which requires the research of the whole process technology of CCUS. This paper studies the source sink matching and technology integration matching in the whole process of CCUS technology, studies the application of existing coal-fired power plants + CCUS, steel plants + CCUS, cement plants + CCUS technology and the future application of BECCS technology and hydrogen energy + CCUS technology, and puts forward relevant suggestions on improving the laws, regulations and policy system for the development of CCUS, establishing a cross sectoral and cross industry cooperation platform and improving the carbon trading system.
基金supported by the National Key Research and Development Program of China(2023YFD2100205)the Fujian Province Science and Technology Plan Project,China(2023N3008).
文摘With the rapid growth of the global population and the increasing demand for healthier diets,improving the nutrient utilization efficiency of staple food crops has become a critical scientific and industrial chal-lenge,prompting innovation in food processing technologies.This review introduces first the common nutritional challenges in the processing of staple food crops,followed by the comprehensive examination of research aiming to enhance the nutritional quality of staple food crop-based foods through innovative processing technologies,including microwave(MW),pulsed electric field(PEF),ultrasound,modern fer-mentation technology,and enzyme technology.Additionally,soybean processing is used as an example to underscore the importance of integrating innovative processing technologies for optimizing nutrient utilization in staple food crops.Although these innovative processing technologies have demonstrated a significant potential to improve nutrient utilization efficiency and enhance the overall nutritional pro-file of staple food crop-based food products,their current limitations must be acknowledged and addressed in future research.Fortunately,advancements in science and technology will facilitate pro-gress in food processing,enabling both the improvement of existing techniques as well as the develop-ment of entirely novel methodologies.This work aims to enhance the understanding of food practitioners on the way processing technologies may optimize nutrient utilization,thereby fostering innovation in food processing research and synergistic multi-technological strategies,ultimately providing valuable references to address global food security challenges.
基金financial support from the National Natural Science Foundation of China (project No. 21406157)
文摘The trichlorosilane(TCS)purification process consumes a significant amount of energy to achieve the high purity requirement for TCS quality(99.9999%).This work proposed a series of energy saving technology to enhance the TCS purification process,including the conventional process,the conventional process coupled with heat-pump(HP),the multi-effect distillation process,and the dividing-wall columns process.All proposed schemes have been conceptually constructed by Aspen Plus.The design and optimization of the processes have been performed by the sensitivity analysis and the response surface methodology.Moreover,the energy consumption and total annual cost(TAC)for these schemes were discussed.The simulation results show that the TAC of the conventional process coupled with the integrated heat pump can reduce 50.5%of energy consumption as compared with the conventional process;the double-effect and three-effect processes can save 15.6%and 33.8%of energy consumption,respectively;the dividing wall column process and that coupled with the heat pump process can reduce by 22.3%and 48.1%of energy consumption,respectively.It can be found that the operating cost can be saved by using the heat pump technology,while the capital cost increases due to the investment in the compressor,when the processes coupled with the heat pump are used.These results demonstrate that the conventional process coupled with the HP technology has advantages over other distillation schemes for TCS purification in terms of the energy saving and economic effects.
基金Project supported by National Natural Science Foundation of China (50405047)Natural Science foundation of Shandong Province (Y2005F04)Jinan Young Star Plan of Science and Technology (08108)
文摘Development and application of new ceramic die materials is one of the important topics in the field of die research. The composition, processing technology, mechanical property and engineering performance of the ceramic materials such as cermet, ZTA, TZP, TZP/Al2O3, TZP/TiC/Al2O3, PSZ and Sialon, etc., with rare earth yttrium, lanthanum and cerium, and so on working as additives, were investigated and analyzed in the present study. Problems existed in the research and application of rare earth ceramic die materials were discussed. Rare earth additives can effectively improve the mechanical property and engineering performance of ceramic die materials. Thus, it will have further perspectives of wider application. More attention should be paid in the future to the toughening and strengthening of the ceramic die materials, the adding forms and kinds of rare earth elements and acting mechanisms of rare earth additives in ceramic die materials.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘In 2022, coinciding with the 20th anniversary of the School of Physics and Electronics at Central South University, we plan to publish the special issue “Laser processing and micro-nano technology” in the Journal of Central South University, which aims to commemorate the 20th anniversary of the school and comprehensively present the latest achievement in the fields of laser processing and micro-nano technology to domestic and foreign universities.
