For multiple-input multiple-output （MIMO） orthogonal frequency division multiplexing （OFDM） systems, a joint timing synchronization and frequency offset acquisition algorithm based on fractional Fourier transform ...For multiple-input multiple-output （MIMO） orthogonal frequency division multiplexing （OFDM） systems, a joint timing synchronization and frequency offset acquisition algorithm based on fractional Fourier transform （FRFT） is proposed. The linear frequency modulation signals superimposed on the data signals are used as the training signals. By performing FRFT on the received signals and searching the peak value of the FRFT results, the receiver can realize timing synchronization and frequency offset acquisition simultaneously. Compared with the existing methods, the proposed algorithm can provide better timing synchronization performance and larger frequency offset acquisition range even under multi-path channels with low signal to noise ratio. Theoretical analysis and simulation results prove this point.展开更多
A fiber-based,multiple access timing signal synchronization scheme is demonstrated.By coupling out the bidirectional transmission signals,a highly stable timing signal can be recovered at arbitrary points along the fi...A fiber-based,multiple access timing signal synchronization scheme is demonstrated.By coupling out the bidirectional transmission signals,a highly stable timing signal can be recovered at arbitrary points along the fiber with the help of the loop delay message broadcasted via ethernet from the local module.The experiment is carried out on a 30-km fiber placed in a temperature-controlled box.In one-day period,when the round trip fiber transfer delay fluctuation is60 ns,the fluctuations of the stabilized timing signal from the download and the remote modules were only ±125 ps and±100 ps,respectively.Also,the system error caused by transmission path asymmetry and thermal drift is calibrated,and a100-ps magnitude synchronization accuracy is realized.This method could provide new insights into the construction of a fiber-based time transfer network.展开更多
In order to solve the problem of inaccurate synchronization for distributed multiple-input multiple-output(MIMO)orthogonal frequency division multiplexing(OFDM)system in both multipath and low signal to noise ratio(SN...In order to solve the problem of inaccurate synchronization for distributed multiple-input multiple-output(MIMO)orthogonal frequency division multiplexing(OFDM)system in both multipath and low signal to noise ratio(SNR)channels,a golay pair aided timing synchronization(GPATS)method is proposed in this paper.A new synchronous training sequence based on the golay pair with guard interval is designed in GPATS method.By utilizing the unique properties of the new training sequence,the different timing point and the inter-transmitter delays(ITD)are obtained at the receiver.Simulation results show that,compared with the traditional synchronization approaches,the proposed algorithm can provide high accuracy in detecting different time offsets caused by the distributed transmitters of the MIMO-OFDM system,especially over multipath and low SNR channels.展开更多
To ensure the uniqueness and recognition of data and make it easy to analyze and process the data of all subsystems of the neutral beam injector （NBI）, it is required that all subsystems have a unified system time. ...To ensure the uniqueness and recognition of data and make it easy to analyze and process the data of all subsystems of the neutral beam injector （NBI）, it is required that all subsystems have a unified system time. In this paper, the timing synchronization software is presented which is related to many kinds of technologies, such as shared memory, multithreading, TCP protocol and so on. Shared memory helps the server save the information of clients and system time, multithreading can deal with different clients with different threads, the server works under Linux operating system, the client works under Linux operating system and Windows operating system. With the help of this design, synchronization of all subsystems can be achieved in less than one second, and this accuracy is enough for the NBI system and the reliability of data is thus ensured.展开更多
Efficient multi-machine cooperation and network dynamics still remain open that jeopardize great applications in largescale machine-to-machine(M2M) networks. Among all possible machine cooperation controls, to synchro...Efficient multi-machine cooperation and network dynamics still remain open that jeopardize great applications in largescale machine-to-machine(M2M) networks. Among all possible machine cooperation controls, to synchronize tremendous machines in a timing-efficient brings one of the greatest challenge and serves as the foundation for any other network control policies. In this paper, we propose a linear-time synchronization protocol in large M2M networks. Specifically, a closed-form of synchronization rate is provided by developing the statistical bounds of the second smallest eigenvalue of the graph Laplacian matrix. These bounds enable the efficient control of network dynamics, facilitating the timing synchronization in networks. Through a practical study in Metropolis, simulation results confirm our theoretical analysis and provide effective selection of wireless technologies, including Zigbee, Wi-Fi, and cellular systems, with respect to the deployed density of machines. Therefore, this paper successfully demonstrates a practical timing synchronization, to make a breakthrough of network dynamic control in real-world machine systems, such as Internet of Things.展开更多
The rise of time-sensitive applications with broad geographical scope drives the development of time-sensitive networking(TSN)from intra-domain to inter-domain to ensure overall end-to-end connectivity requirements in...The rise of time-sensitive applications with broad geographical scope drives the development of time-sensitive networking(TSN)from intra-domain to inter-domain to ensure overall end-to-end connectivity requirements in heterogeneous deployments.When multiple TSN networks interconnect over non-TSN networks,all devices in the network need to be syn-chronized by sharing a uniform time reference.How-ever,most non-TSN networks are best-effort.Path delay asymmetry and random noise accumulation can introduce unpredictable time errors during end-to-end time synchronization.These factors can degrade syn-chronization performance.Therefore,cross-domain time synchronization becomes a challenging issue for multiple TSN networks interconnected by non-TSN networks.This paper presents a cross-domain time synchronization scheme that follows the software-defined TSN(SD-TSN)paradigm.It utilizes a com-bined control plane constructed by a coordinate con-troller and a domain controller for centralized control and management of cross-domain time synchroniza-tion.The general operation flow of the cross-domain time synchronization process is designed.The mecha-nism of cross-domain time synchronization is revealed by introducing a synchronization model and an error compensation method.A TSN cross-domain proto-type testbed is constructed for verification.Results show that the scheme can achieve end-to-end high-precision time synchronization with accuracy and sta-bility.展开更多
In a typical intensity-modulated direct-detection optical system, the information is carried on the intensity of the optical signal, and therefore can only be positive. Existing synchronization methods for RF-based OF...In a typical intensity-modulated direct-detection optical system, the information is carried on the intensity of the optical signal, and therefore can only be positive. Existing synchronization methods for RF-based OFDM system cannot be used directly in asymmetrically clipped DC biased optical of DM (ADO-OFDM) system. In order to solve the above problem, according to the characteristics of ADO-OFDM signal, the modified training symbol is presented. The simulation results show that the modified synchronization method gives good performance.展开更多
This study proposes a novel time-synchronization protocol inspired by stochastic gradient algorithms.The clock model of each network node in this synchronizer is configured as a generic adaptive filter where different...This study proposes a novel time-synchronization protocol inspired by stochastic gradient algorithms.The clock model of each network node in this synchronizer is configured as a generic adaptive filter where different stochastic gradient algorithms can be adopted for adaptive clock frequency adjustments.The study analyzes the pairwise synchronization behavior of the protocol and proves the generalized convergence of the synchronization error and clock frequency.A novel closed-form expression is also derived for a generalized asymptotic error variance steady state.Steady and convergence analyses are then presented for the synchronization,with frequency adaptations done using least mean square(LMS),the Newton search,the gradient descent(GraDes),the normalized LMS(N-LMS),and the Sign-Data LMS algorithms.Results obtained from real-time experiments showed a better performance of our protocols as compared to the Average Proportional-Integral Synchronization Protocol(AvgPISync)regarding the impact of quantization error on synchronization accuracy,precision,and convergence time.This generalized approach to time synchronization allows flexibility in selecting a suitable protocol for different wireless sensor network applications.展开更多
This paper study the finite time internal synchronization and the external synchronization(hybrid synchronization)for duplex heterogeneous complex networks by time-varying intermittent control.There few study hybrid s...This paper study the finite time internal synchronization and the external synchronization(hybrid synchronization)for duplex heterogeneous complex networks by time-varying intermittent control.There few study hybrid synchronization of heterogeneous duplex complex networks.Therefore,we study the finite time hybrid synchronization of heterogeneous duplex networks,which employs the time-varying intermittent control to drive the duplex heterogeneous complex networks to achieve hybrid synchronization in finite time.To be specific,the switch frequency of the controllers can be changed with time by devise Lyapunov function and boundary function,the internal synchronization and external synchronization are achieved simultaneously in finite time.Finally,numerical examples are presented to illustrate the validness of theoretical results.展开更多
As vehicular networks become increasingly pervasive,enhancing connectivity and reliability has emerged as a critical objective.Among the enabling technologies for advanced wireless communication,particularly those tar...As vehicular networks become increasingly pervasive,enhancing connectivity and reliability has emerged as a critical objective.Among the enabling technologies for advanced wireless communication,particularly those targeting low latency and high reliability,time synchronization is critical,especially in vehicular networks.However,due to the inherent mobility of vehicular environments,consistently exchanging synchronization packets with a fixed base station or access point is challenging.This issue is further exacerbated in signal shadowed areas such as urban canyons,tunnels,or large-scale indoor hallswhere other technologies,such as global navigation satellite system(GNSS),are unavailable.One-way synchronization techniques offer a feasible approach under such transient connectivity conditions.One-way schemes still suffer from long convergence times to reach the required synchronization accuracy in these circumstances.In this paper,we propose a WLAN-based multi-stage clock synchronization scheme(WMC)tailored for vehicular networks.The proposed method comprises an initial hard update stage to rapidly achieve synchronization,followed by a high-precision stable stage based on Maximum Likelihood Estimation(MLE).By implementing the scheme directly at the network driver,we address key limitations of hard update mechanisms.Our approach significantly reduces the initial period to collect high-quality samples and offset estimation time to reach sub-50μs accuracy,and subsequently transitions to a refined MLE-based synchronization stage,achieving stable accuracy at approximately 30μs.The windowed moving average stabilized(reaching 90%of the baseline)in approximately 35 s,which corresponds to just 5.1%of the baseline time accuracy.Finally,the impact of synchronization performance on the localization model was validated using the Simulation of Urban Mobility(SUMO).The results demonstrate that more accurate conditions for position estimation can be supported,with an improvement about 38.5%in the mean error.展开更多
Accurate time synchronization is fundamental to the correct and efficient operation of Wireless Sensor Networks(WSNs),especially in security-critical,time-sensitive applications.However,most existing protocols degrade...Accurate time synchronization is fundamental to the correct and efficient operation of Wireless Sensor Networks(WSNs),especially in security-critical,time-sensitive applications.However,most existing protocols degrade substantially under malicious interference.We introduce iSTSP,an Intelligent and Secure Time Synchronization Protocol that implements a four-stage defense pipeline to ensure robust,precise synchronization even in hostile environments:(1)trust preprocessing that filters node participation using behavioral trust scoring;(2)anomaly isolation employing a lightweight autoencoder to detect and excise malicious nodes in real time;(3)reliability-weighted consensus that prioritizes high-trust nodes during time aggregation;and(4)convergence-optimized synchronization that dynamically adjusts parameters using theoretical stability bounds.We provide rigorous convergence analysis including a closed-form expression for convergence time,and validate the protocol through both simulations and realworld experiments on a controlled 16-node testbed.Under Sybil attacks with five malicious nodes within this testbed,iSTSP maintains synchronization error increases under 12%and achieves a rapid convergence.Compared to state-ofthe-art protocols like TPSN,SE-FTSP,and MMAR-CTS,iSTSP offers 60%faster detection,broader threat coverage,and more than 7 times lower synchronization error,with a modest 9.3%energy overhead over 8 h.We argue this is an acceptable trade-off for mission-critical deployments requiring guaranteed security.These findings demonstrate iSTSP’s potential as a reliable solution for secure WSN synchronization and motivate future work on large-scale IoT deployments and integration with energy-efficient communication protocols.展开更多
Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster ...Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster is important for both cluster sensing capabilities and its autonomous operating. However, the existing time synchronization methods are not suitable for microsatellite cluster, because it requires too many human interventions and occupies too much ground control resource. Although, data post-process may realize the equivalent time synchronization, it requires processing time and powerful computing ability on the ground, which cannot be implemented by cluster itself. In order to autonomously establish and maintain the time benchmark in a cluster, we propose a compact time difference compensation system（TDCS）, which is a kind of time control loop that dynamically adjusts the satellite reference frequency according to the time difference. Consequently, the time synchronization in the cluster can be autonomously achieved on-orbit by synchronizing the clock of other satellites to a chosen one＇s. The experimental result shows that the standard deviation of time synchronization is about 102 ps when the carrier to noise ratio（CNR） is 95 d BHz, and the standard deviation of corresponding frequency difference is approximately0.36 Hz.展开更多
Time synchronization is a critical middleware service of wireless sensor networks. Researchers have already proposed some time synchronization algorithms. However, due to the demands for various synchronization precis...Time synchronization is a critical middleware service of wireless sensor networks. Researchers have already proposed some time synchronization algorithms. However, due to the demands for various synchronization precision, existing time synchronization algorithms often need to be adapted. So it is necessary to evaluate these adapted algorithms before use. Software simulation is a valid and quick way to do it. In this paper, we present a time synchronization simulator, Simsync, for wireless sensor networks. We decompose the packet delay into 6 delay components and model them separately. The frequency of crystal oscillator is modeled as Gaussian. To testify its effectiveness, we simulate the reference broadcast synchronization algorithm (RBS) and the timing-sync synchronization algorithm (TPSN) on Simsync. Simulated results are also presented and analyzed.展开更多
A complete method of synchronization technology of bistatic radar using global position system （GPS） is presented. The pulse per second signal （1PPS） is elaborately modified to increase the time synchronization pr...A complete method of synchronization technology of bistatic radar using global position system （GPS） is presented. The pulse per second signal （1PPS） is elaborately modified to increase the time synchronization precision and keep loop locking. A very high time synchronization precision is achieved. Using the modified 1PPS to discipline the local OCXO, the reference frequency signal achieves both high long term stability （LTS） and short term stability （STS） properties. An algorithm, named phase abrupt change CFAR is presented to restrain the 1PPS phase abrupt change and keep loop locking. The experimental results indicate that this time and frequency synchronization method is effective and the time synchronization precision of the synchronization system can be improved from ±100 ns to ±25 ns. In addition, the phase noise is improved to 20 dB.展开更多
To cope with the arbitrariness of the network delays,a novel method,referred to as the composite particle filter approach based on variational Bayesian(VB-CPF),is proposed herein to estimate the clock skew and clock o...To cope with the arbitrariness of the network delays,a novel method,referred to as the composite particle filter approach based on variational Bayesian(VB-CPF),is proposed herein to estimate the clock skew and clock offset in wireless sensor networks.VB-CPF is an improvement of the Gaussian mixture kalman particle filter(GMKPF)algorithm.In GMKPF,Expectation-Maximization(EM)algorithm needs to determine the number of mixture components in advance,and it is easy to generate overfitting and underfitting.Variational Bayesian EM(VB-EM)algorithm is introduced in this paper to determine the number of mixture components adaptively according to the observations.Moreover,to solve the problem of data packet loss caused by unreliable links,we propose a robust time synchronization(RTS)method in this paper.RTS establishes an autoregressive model for clock skew,and calculates the clock parameters based on the established autoregressive model in case of packet loss.The final simulation results illustrate that VB-CPF yields much more accurate results relative to GMKPF when the network delays are modeled in terms of an asymmetric Gaussian distribution.Moreover,RTS shows good robustness to the continuous and random dropout of time messages.展开更多
Airborne Distributed Coherent Aperture Radar(ADCAR)is one of the most promising next-generation radars to significantly improve target detection and discrimination abilities.However,time and phase synchronization amon...Airborne Distributed Coherent Aperture Radar(ADCAR)is one of the most promising next-generation radars to significantly improve target detection and discrimination abilities.However,time and phase synchronization among unit radars should be done before an ADCAR is intended to cohere on a potential target.To address this problem,a time and phase synchronization technique using clutter observations is proposed in this paper.Clutter returns from different azimuths and elevations on the surface of the earth are employed to calibrate system uncertainties.Two stages are mainly considered:a scene registration among range-Doppler units from different transmit/receive pairs is performed to enhance the clutter coherence in the first stage,followed by a joint estimation of those synchronization errors in the second stage.To relieve the computational burden,a novel Separable and Sequential Estimation(SSE)method is provided to separate the unknowns at the sacrifice of a range-Doppler unit.Moreover,performance analyses including the clutter coherence ability,estimation lower bound,and signal coherence loss are also performed.Finally,simulation results indicate that ADCAR time and phase synchronization is realized by using our methods.展开更多
A system of jointly transferring time signals with a rate of 1 pulse per second （PPS） and frequency signals of 10 MHz via a dense wavelength division multiplex-based （DWDM） fiber is demonstrated in this paper. The...A system of jointly transferring time signals with a rate of 1 pulse per second （PPS） and frequency signals of 10 MHz via a dense wavelength division multiplex-based （DWDM） fiber is demonstrated in this paper. The noises of the fiber links are suppressed and compensated for by a controlled fiber delay line. A method of calibrating and characterizing time is described. The 1PPS is synchronized by feed-forward calibrating the fiber delays precisely. The system is experimen- tally examined via a 110 km spooled fiber in laboratory. The frequency stabilities of the user end with compensation are 1.8x 10-14 at 1 s and 2.0x 10-17 at 104 s average time. The calculated uncertainty of time synchronization is 13.1 ps, whereas the direct measurement of the uncertainty is 12 ps. Next, the frequency and 1PPS are transferred via a metropoli- tan area optical fiber network from one central site to two remote sites with distances of 14 km and 110 km. The frequency stabilities of 14 km link reach 3.0x 10-14 averaged in 1 s and 1.4x 10-17 in 104 s respectively; and the stabilities of 110 km link are 8.3 x 10-14 and 1.7 x 10-17, respectively. The accuracies of synchronization are estimated to be 12.3 ps for the 14 km link and 13.1 ps for the 110 km link, respectively.展开更多
As the popularization of dual ring fieldbus, the optimized dual ring synchronization methods are still in short. The current synchronization methods are generally established in traditional industrial fieldbus, in whi...As the popularization of dual ring fieldbus, the optimized dual ring synchronization methods are still in short. The current synchronization methods are generally established in traditional industrial fieldbus, in which transmission is commonly considered in single track, the two-way transmitting cannot take full effect, and would result in unwanted idle load on equipment lines. In stamp-transferring part, the synchronizing algorithm is not properly processed to diminish the latency, so the real-time performance of entire system cannot be ensured. To support the synchronization control of stations in the CNC system, a real-time time synchronization method for dual ring fieldbus in the CNC system is designed in this paper. In this method a synchronizing message transmission scheme based on dual ring architecture and the synchronization algorithm between master and secondary stations are integrated. In the scheme, the clock models of both master and secondary stations are optimized with corresponding modules and the stamp data transmission based on the dual ring fieldbus is devised exclusively, so the transmitting efficiency improves with less idle work. In the algorithm, all the secondary stations can accomplish the consistent state with master station by updating clock discrepancy information in one communication cycle, and it takes the advantage of two-way transmitting and makes the best use of dual ring structure, so the real-time performance of the system can be promoted while retaining the precision of synchronization. To evaluate the performance, the costs of the method and errors during synchronizing are noted and analyzed based on the actual running environment in the industrial fieldbus. The results show that it reduces communication cost and ensures the smoothness of the system with low lag effects under heavy load. The proposed time synchronization method optimizes the architecture of sync message transmission in dual ring fieldbus, and improves the efficiency of time synchronization in the stations of CNC system.展开更多
When designing a complex mechatronics system,such as high speed trains,it is relatively difficult to effectively simulate the entire system's dynamic behaviors because it involves multi-disciplinary subsystems.Cur...When designing a complex mechatronics system,such as high speed trains,it is relatively difficult to effectively simulate the entire system's dynamic behaviors because it involves multi-disciplinary subsystems.Currently,a most practical approach for multi-disciplinary simulation is interface based coupling simulation method,but it faces a twofold challenge:spatial and time unsynchronizations among multi-directional coupling simulation of subsystems.A new collaborative simulation method with spatiotemporal synchronization process control is proposed for coupling simulating a given complex mechatronics system across multiple subsystems on different platforms.The method consists of 1)a coupler-based coupling mechanisms to define the interfacing and interaction mechanisms among subsystems,and 2)a simulation process control algorithm to realize the coupling simulation in a spatiotemporal synchronized manner.The test results from a case study show that the proposed method 1)can certainly be used to simulate the sub-systems interactions under different simulation conditions in an engineering system,and 2)effectively supports multi-directional coupling simulation among multi-disciplinary subsystems.This method has been successfully applied in China high speed train design and development processes,demonstrating that it can be applied in a wide range of engineering systems design and simulation with improved efficiency and effectiveness.展开更多
We propose a physical model of estimating noise and asymmetry brought by high isolation Bi-directional erbiumdoped fiber amplifiers(Bi-EDFAs),no spontaneous lasing even with high gain,in longdistance fiber-optic time ...We propose a physical model of estimating noise and asymmetry brought by high isolation Bi-directional erbiumdoped fiber amplifiers(Bi-EDFAs),no spontaneous lasing even with high gain,in longdistance fiber-optic time and frequency(T/F)synchronization system.It is found that the Rayleigh scattering noise can be suppressed due to the high isolation design,but the amplified spontaneous emission(ASE)noise generated by the high isolation Bi-EDFA and the bidirectional asymmetry of the transmission link caused by the high isolation Bi-EDFA will deteriorate the stability of the system.The calculated results show that under the influence of ASE noise,the frequency instability of a 1200 km system composed of 15 high isolation Bi-EDFAs is 1.773×10^(-13)/1 s.And the instability caused by asymmetry is 2.6064×10^(-16)/30000–35000 s if the total asymmetric length of the bidirectional link length is 30 m.The intensity noises originating from the laser and detector,the transfer delay fluctuations caused by the variation in ambient temperature and the jitter in laser output wavelength are also studied.The experiment composed of three high isolation Bi-EDFAs is done to confirm the theoretical analysis.In summary,the paper shows that the short-term instability of the T/F synchronization system composed of high isolation Bi-EDFAs is limited by the accumulation of ASE noise of amplifiers and the laser frequency drift,while the long-term instability is limited by the periodic variation in ambient temperature and the asymmetry of the amplifiers.The research results are useful for pointing out the direction to improve the stability of the fiber-optic T/F synchronization system.展开更多
基金supported by the National Natural Science Foundation of China(60672047).
文摘For multiple-input multiple-output （MIMO） orthogonal frequency division multiplexing （OFDM） systems, a joint timing synchronization and frequency offset acquisition algorithm based on fractional Fourier transform （FRFT） is proposed. The linear frequency modulation signals superimposed on the data signals are used as the training signals. By performing FRFT on the received signals and searching the peak value of the FRFT results, the receiver can realize timing synchronization and frequency offset acquisition simultaneously. Compared with the existing methods, the proposed algorithm can provide better timing synchronization performance and larger frequency offset acquisition range even under multi-path channels with low signal to noise ratio. Theoretical analysis and simulation results prove this point.
基金Project supported by the National Key Scientific Instrument and Equipment Development Project of China(Grant No.2013YQ09094303)the Program of International Science and Technology Cooperation(Grant No.2016YFE0100200)
文摘A fiber-based,multiple access timing signal synchronization scheme is demonstrated.By coupling out the bidirectional transmission signals,a highly stable timing signal can be recovered at arbitrary points along the fiber with the help of the loop delay message broadcasted via ethernet from the local module.The experiment is carried out on a 30-km fiber placed in a temperature-controlled box.In one-day period,when the round trip fiber transfer delay fluctuation is60 ns,the fluctuations of the stabilized timing signal from the download and the remote modules were only ±125 ps and±100 ps,respectively.Also,the system error caused by transmission path asymmetry and thermal drift is calibrated,and a100-ps magnitude synchronization accuracy is realized.This method could provide new insights into the construction of a fiber-based time transfer network.
基金supported by the Fundamental Research Funds for the Central Universities(NS2017066)
文摘In order to solve the problem of inaccurate synchronization for distributed multiple-input multiple-output(MIMO)orthogonal frequency division multiplexing(OFDM)system in both multipath and low signal to noise ratio(SNR)channels,a golay pair aided timing synchronization(GPATS)method is proposed in this paper.A new synchronous training sequence based on the golay pair with guard interval is designed in GPATS method.By utilizing the unique properties of the new training sequence,the different timing point and the inter-transmitter delays(ITD)are obtained at the receiver.Simulation results show that,compared with the traditional synchronization approaches,the proposed algorithm can provide high accuracy in detecting different time offsets caused by the distributed transmitters of the MIMO-OFDM system,especially over multipath and low SNR channels.
基金supported by National Natural Science Foundation of China(No.11075183)the Knowledge Innovation Program of the Chinese Academy of Sciences(the study of neutral beam steady-state operation of the key technical and physical problems)
文摘To ensure the uniqueness and recognition of data and make it easy to analyze and process the data of all subsystems of the neutral beam injector （NBI）, it is required that all subsystems have a unified system time. In this paper, the timing synchronization software is presented which is related to many kinds of technologies, such as shared memory, multithreading, TCP protocol and so on. Shared memory helps the server save the information of clients and system time, multithreading can deal with different clients with different threads, the server works under Linux operating system, the client works under Linux operating system and Windows operating system. With the help of this design, synchronization of all subsystems can be achieved in less than one second, and this accuracy is enough for the NBI system and the reliability of data is thus ensured.
基金supported by the Major Research plan of the National Natural Science Foundation of China 9118008National Key Technology R&D Program of the Ministry of Science and Technology 2014BAC16B01
文摘Efficient multi-machine cooperation and network dynamics still remain open that jeopardize great applications in largescale machine-to-machine(M2M) networks. Among all possible machine cooperation controls, to synchronize tremendous machines in a timing-efficient brings one of the greatest challenge and serves as the foundation for any other network control policies. In this paper, we propose a linear-time synchronization protocol in large M2M networks. Specifically, a closed-form of synchronization rate is provided by developing the statistical bounds of the second smallest eigenvalue of the graph Laplacian matrix. These bounds enable the efficient control of network dynamics, facilitating the timing synchronization in networks. Through a practical study in Metropolis, simulation results confirm our theoretical analysis and provide effective selection of wireless technologies, including Zigbee, Wi-Fi, and cellular systems, with respect to the deployed density of machines. Therefore, this paper successfully demonstrates a practical timing synchronization, to make a breakthrough of network dynamic control in real-world machine systems, such as Internet of Things.
基金supported in part by National Key R&D Program of China(Grant No.2022YFC3803700)in part by the National Natural Science Foundation of China(Grant No.92067102)in part by the project of Beijing Laboratory of Advanced Information Networks.
文摘The rise of time-sensitive applications with broad geographical scope drives the development of time-sensitive networking(TSN)from intra-domain to inter-domain to ensure overall end-to-end connectivity requirements in heterogeneous deployments.When multiple TSN networks interconnect over non-TSN networks,all devices in the network need to be syn-chronized by sharing a uniform time reference.How-ever,most non-TSN networks are best-effort.Path delay asymmetry and random noise accumulation can introduce unpredictable time errors during end-to-end time synchronization.These factors can degrade syn-chronization performance.Therefore,cross-domain time synchronization becomes a challenging issue for multiple TSN networks interconnected by non-TSN networks.This paper presents a cross-domain time synchronization scheme that follows the software-defined TSN(SD-TSN)paradigm.It utilizes a com-bined control plane constructed by a coordinate con-troller and a domain controller for centralized control and management of cross-domain time synchroniza-tion.The general operation flow of the cross-domain time synchronization process is designed.The mecha-nism of cross-domain time synchronization is revealed by introducing a synchronization model and an error compensation method.A TSN cross-domain proto-type testbed is constructed for verification.Results show that the scheme can achieve end-to-end high-precision time synchronization with accuracy and sta-bility.
文摘In a typical intensity-modulated direct-detection optical system, the information is carried on the intensity of the optical signal, and therefore can only be positive. Existing synchronization methods for RF-based OFDM system cannot be used directly in asymmetrically clipped DC biased optical of DM (ADO-OFDM) system. In order to solve the above problem, according to the characteristics of ADO-OFDM signal, the modified training symbol is presented. The simulation results show that the modified synchronization method gives good performance.
基金funded by Universiti Putra Malaysia under a Geran Putra Inisiatif(GPI)research grant with reference to GP-GPI/2023/9762100.
文摘This study proposes a novel time-synchronization protocol inspired by stochastic gradient algorithms.The clock model of each network node in this synchronizer is configured as a generic adaptive filter where different stochastic gradient algorithms can be adopted for adaptive clock frequency adjustments.The study analyzes the pairwise synchronization behavior of the protocol and proves the generalized convergence of the synchronization error and clock frequency.A novel closed-form expression is also derived for a generalized asymptotic error variance steady state.Steady and convergence analyses are then presented for the synchronization,with frequency adaptations done using least mean square(LMS),the Newton search,the gradient descent(GraDes),the normalized LMS(N-LMS),and the Sign-Data LMS algorithms.Results obtained from real-time experiments showed a better performance of our protocols as compared to the Average Proportional-Integral Synchronization Protocol(AvgPISync)regarding the impact of quantization error on synchronization accuracy,precision,and convergence time.This generalized approach to time synchronization allows flexibility in selecting a suitable protocol for different wireless sensor network applications.
基金Project supported by Jilin Provincial Science and Technology Development Plan(Grant No.20220101137JC).
文摘This paper study the finite time internal synchronization and the external synchronization(hybrid synchronization)for duplex heterogeneous complex networks by time-varying intermittent control.There few study hybrid synchronization of heterogeneous duplex complex networks.Therefore,we study the finite time hybrid synchronization of heterogeneous duplex networks,which employs the time-varying intermittent control to drive the duplex heterogeneous complex networks to achieve hybrid synchronization in finite time.To be specific,the switch frequency of the controllers can be changed with time by devise Lyapunov function and boundary function,the internal synchronization and external synchronization are achieved simultaneously in finite time.Finally,numerical examples are presented to illustrate the validness of theoretical results.
基金supported by Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea government(MOTIE)(No.20224B10300090)supported by the MSIT(Ministry of Science and ICT),Republic of Korea,under the ITRC(Information Technology Research Center)support program(IITP-2025-RS-2021-II211835)supervised by the IITP(Institute of Information&Communications Technology Planning&Evaluation).
文摘As vehicular networks become increasingly pervasive,enhancing connectivity and reliability has emerged as a critical objective.Among the enabling technologies for advanced wireless communication,particularly those targeting low latency and high reliability,time synchronization is critical,especially in vehicular networks.However,due to the inherent mobility of vehicular environments,consistently exchanging synchronization packets with a fixed base station or access point is challenging.This issue is further exacerbated in signal shadowed areas such as urban canyons,tunnels,or large-scale indoor hallswhere other technologies,such as global navigation satellite system(GNSS),are unavailable.One-way synchronization techniques offer a feasible approach under such transient connectivity conditions.One-way schemes still suffer from long convergence times to reach the required synchronization accuracy in these circumstances.In this paper,we propose a WLAN-based multi-stage clock synchronization scheme(WMC)tailored for vehicular networks.The proposed method comprises an initial hard update stage to rapidly achieve synchronization,followed by a high-precision stable stage based on Maximum Likelihood Estimation(MLE).By implementing the scheme directly at the network driver,we address key limitations of hard update mechanisms.Our approach significantly reduces the initial period to collect high-quality samples and offset estimation time to reach sub-50μs accuracy,and subsequently transitions to a refined MLE-based synchronization stage,achieving stable accuracy at approximately 30μs.The windowed moving average stabilized(reaching 90%of the baseline)in approximately 35 s,which corresponds to just 5.1%of the baseline time accuracy.Finally,the impact of synchronization performance on the localization model was validated using the Simulation of Urban Mobility(SUMO).The results demonstrate that more accurate conditions for position estimation can be supported,with an improvement about 38.5%in the mean error.
基金this project under Geran Putra Inisiatif(GPI)with reference of GP-GPI/2023/976210。
文摘Accurate time synchronization is fundamental to the correct and efficient operation of Wireless Sensor Networks(WSNs),especially in security-critical,time-sensitive applications.However,most existing protocols degrade substantially under malicious interference.We introduce iSTSP,an Intelligent and Secure Time Synchronization Protocol that implements a four-stage defense pipeline to ensure robust,precise synchronization even in hostile environments:(1)trust preprocessing that filters node participation using behavioral trust scoring;(2)anomaly isolation employing a lightweight autoencoder to detect and excise malicious nodes in real time;(3)reliability-weighted consensus that prioritizes high-trust nodes during time aggregation;and(4)convergence-optimized synchronization that dynamically adjusts parameters using theoretical stability bounds.We provide rigorous convergence analysis including a closed-form expression for convergence time,and validate the protocol through both simulations and realworld experiments on a controlled 16-node testbed.Under Sybil attacks with five malicious nodes within this testbed,iSTSP maintains synchronization error increases under 12%and achieves a rapid convergence.Compared to state-ofthe-art protocols like TPSN,SE-FTSP,and MMAR-CTS,iSTSP offers 60%faster detection,broader threat coverage,and more than 7 times lower synchronization error,with a modest 9.3%energy overhead over 8 h.We argue this is an acceptable trade-off for mission-critical deployments requiring guaranteed security.These findings demonstrate iSTSP’s potential as a reliable solution for secure WSN synchronization and motivate future work on large-scale IoT deployments and integration with energy-efficient communication protocols.
基金supported by the National Natural Science Foundation of China(61401389)the Joint Fund of the Ministry of Education of China(6141A02033310)
文摘Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster is important for both cluster sensing capabilities and its autonomous operating. However, the existing time synchronization methods are not suitable for microsatellite cluster, because it requires too many human interventions and occupies too much ground control resource. Although, data post-process may realize the equivalent time synchronization, it requires processing time and powerful computing ability on the ground, which cannot be implemented by cluster itself. In order to autonomously establish and maintain the time benchmark in a cluster, we propose a compact time difference compensation system（TDCS）, which is a kind of time control loop that dynamically adjusts the satellite reference frequency according to the time difference. Consequently, the time synchronization in the cluster can be autonomously achieved on-orbit by synchronizing the clock of other satellites to a chosen one＇s. The experimental result shows that the standard deviation of time synchronization is about 102 ps when the carrier to noise ratio（CNR） is 95 d BHz, and the standard deviation of corresponding frequency difference is approximately0.36 Hz.
基金Supported in part by National Basic Research Program of P. R. China(2005CB321604) in part by National Natural Science Foundation of P. R. China (90207002)
文摘Time synchronization is a critical middleware service of wireless sensor networks. Researchers have already proposed some time synchronization algorithms. However, due to the demands for various synchronization precision, existing time synchronization algorithms often need to be adapted. So it is necessary to evaluate these adapted algorithms before use. Software simulation is a valid and quick way to do it. In this paper, we present a time synchronization simulator, Simsync, for wireless sensor networks. We decompose the packet delay into 6 delay components and model them separately. The frequency of crystal oscillator is modeled as Gaussian. To testify its effectiveness, we simulate the reference broadcast synchronization algorithm (RBS) and the timing-sync synchronization algorithm (TPSN) on Simsync. Simulated results are also presented and analyzed.
基金the National Ministry Innovation Foundation (7130302)
文摘A complete method of synchronization technology of bistatic radar using global position system （GPS） is presented. The pulse per second signal （1PPS） is elaborately modified to increase the time synchronization precision and keep loop locking. A very high time synchronization precision is achieved. Using the modified 1PPS to discipline the local OCXO, the reference frequency signal achieves both high long term stability （LTS） and short term stability （STS） properties. An algorithm, named phase abrupt change CFAR is presented to restrain the 1PPS phase abrupt change and keep loop locking. The experimental results indicate that this time and frequency synchronization method is effective and the time synchronization precision of the synchronization system can be improved from ±100 ns to ±25 ns. In addition, the phase noise is improved to 20 dB.
基金This work was supported by the National Natural Science Foundation of China(No.61672299)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province of China(No.18KJB520035)+2 种基金the Youth Foundation of Nanjing University of Finance and Economics(No.L-JXL18002)the Youth Foundation of Nanjing University of Posts and Telecommunications(No.NY218142)the Natural Science Foundation of Jiangsu Province(No.BK20160913).
文摘To cope with the arbitrariness of the network delays,a novel method,referred to as the composite particle filter approach based on variational Bayesian(VB-CPF),is proposed herein to estimate the clock skew and clock offset in wireless sensor networks.VB-CPF is an improvement of the Gaussian mixture kalman particle filter(GMKPF)algorithm.In GMKPF,Expectation-Maximization(EM)algorithm needs to determine the number of mixture components in advance,and it is easy to generate overfitting and underfitting.Variational Bayesian EM(VB-EM)algorithm is introduced in this paper to determine the number of mixture components adaptively according to the observations.Moreover,to solve the problem of data packet loss caused by unreliable links,we propose a robust time synchronization(RTS)method in this paper.RTS establishes an autoregressive model for clock skew,and calculates the clock parameters based on the established autoregressive model in case of packet loss.The final simulation results illustrate that VB-CPF yields much more accurate results relative to GMKPF when the network delays are modeled in terms of an asymmetric Gaussian distribution.Moreover,RTS shows good robustness to the continuous and random dropout of time messages.
文摘Airborne Distributed Coherent Aperture Radar(ADCAR)is one of the most promising next-generation radars to significantly improve target detection and discrimination abilities.However,time and phase synchronization among unit radars should be done before an ADCAR is intended to cohere on a potential target.To address this problem,a time and phase synchronization technique using clutter observations is proposed in this paper.Clutter returns from different azimuths and elevations on the surface of the earth are employed to calibrate system uncertainties.Two stages are mainly considered:a scene registration among range-Doppler units from different transmit/receive pairs is performed to enhance the clutter coherence in the first stage,followed by a joint estimation of those synchronization errors in the second stage.To relieve the computational burden,a novel Separable and Sequential Estimation(SSE)method is provided to separate the unknowns at the sacrifice of a range-Doppler unit.Moreover,performance analyses including the clutter coherence ability,estimation lower bound,and signal coherence loss are also performed.Finally,simulation results indicate that ADCAR time and phase synchronization is realized by using our methods.
基金supported by the National Natural Science Foundation of China(Grant No.61405227)
文摘A system of jointly transferring time signals with a rate of 1 pulse per second （PPS） and frequency signals of 10 MHz via a dense wavelength division multiplex-based （DWDM） fiber is demonstrated in this paper. The noises of the fiber links are suppressed and compensated for by a controlled fiber delay line. A method of calibrating and characterizing time is described. The 1PPS is synchronized by feed-forward calibrating the fiber delays precisely. The system is experimen- tally examined via a 110 km spooled fiber in laboratory. The frequency stabilities of the user end with compensation are 1.8x 10-14 at 1 s and 2.0x 10-17 at 104 s average time. The calculated uncertainty of time synchronization is 13.1 ps, whereas the direct measurement of the uncertainty is 12 ps. Next, the frequency and 1PPS are transferred via a metropoli- tan area optical fiber network from one central site to two remote sites with distances of 14 km and 110 km. The frequency stabilities of 14 km link reach 3.0x 10-14 averaged in 1 s and 1.4x 10-17 in 104 s respectively; and the stabilities of 110 km link are 8.3 x 10-14 and 1.7 x 10-17, respectively. The accuracies of synchronization are estimated to be 12.3 ps for the 14 km link and 13.1 ps for the 110 km link, respectively.
基金supported by National Projects for Science and Technology Development of China(Grant No.2011ZX04016-071)National Basic Research Program of China(973 Program,Grant No.2011CB302400-G,the mathematical mechanization method and its application in digital design and manufacturing)
文摘As the popularization of dual ring fieldbus, the optimized dual ring synchronization methods are still in short. The current synchronization methods are generally established in traditional industrial fieldbus, in which transmission is commonly considered in single track, the two-way transmitting cannot take full effect, and would result in unwanted idle load on equipment lines. In stamp-transferring part, the synchronizing algorithm is not properly processed to diminish the latency, so the real-time performance of entire system cannot be ensured. To support the synchronization control of stations in the CNC system, a real-time time synchronization method for dual ring fieldbus in the CNC system is designed in this paper. In this method a synchronizing message transmission scheme based on dual ring architecture and the synchronization algorithm between master and secondary stations are integrated. In the scheme, the clock models of both master and secondary stations are optimized with corresponding modules and the stamp data transmission based on the dual ring fieldbus is devised exclusively, so the transmitting efficiency improves with less idle work. In the algorithm, all the secondary stations can accomplish the consistent state with master station by updating clock discrepancy information in one communication cycle, and it takes the advantage of two-way transmitting and makes the best use of dual ring structure, so the real-time performance of the system can be promoted while retaining the precision of synchronization. To evaluate the performance, the costs of the method and errors during synchronizing are noted and analyzed based on the actual running environment in the industrial fieldbus. The results show that it reduces communication cost and ensures the smoothness of the system with low lag effects under heavy load. The proposed time synchronization method optimizes the architecture of sync message transmission in dual ring fieldbus, and improves the efficiency of time synchronization in the stations of CNC system.
基金Supported by National High Technology Research and Development Program of China(863 Program,Grant No.2015AA043701-02)
文摘When designing a complex mechatronics system,such as high speed trains,it is relatively difficult to effectively simulate the entire system's dynamic behaviors because it involves multi-disciplinary subsystems.Currently,a most practical approach for multi-disciplinary simulation is interface based coupling simulation method,but it faces a twofold challenge:spatial and time unsynchronizations among multi-directional coupling simulation of subsystems.A new collaborative simulation method with spatiotemporal synchronization process control is proposed for coupling simulating a given complex mechatronics system across multiple subsystems on different platforms.The method consists of 1)a coupler-based coupling mechanisms to define the interfacing and interaction mechanisms among subsystems,and 2)a simulation process control algorithm to realize the coupling simulation in a spatiotemporal synchronized manner.The test results from a case study show that the proposed method 1)can certainly be used to simulate the sub-systems interactions under different simulation conditions in an engineering system,and 2)effectively supports multi-directional coupling simulation among multi-disciplinary subsystems.This method has been successfully applied in China high speed train design and development processes,demonstrating that it can be applied in a wide range of engineering systems design and simulation with improved efficiency and effectiveness.
基金the National Natural Science Foundation of China(Grant Nos.61701040,61771062,and 61871044)the Youth Program of the National Natural Science Foundation of China(Grant No.61901046)+1 种基金the Fundamental Research Funds for the Central Universities,China(Grant Nos.2019XD-A18and 2019PTB-004)the Youth Research and Innovation Program of BUPT(Grant No.2017RC13)。
文摘We propose a physical model of estimating noise and asymmetry brought by high isolation Bi-directional erbiumdoped fiber amplifiers(Bi-EDFAs),no spontaneous lasing even with high gain,in longdistance fiber-optic time and frequency(T/F)synchronization system.It is found that the Rayleigh scattering noise can be suppressed due to the high isolation design,but the amplified spontaneous emission(ASE)noise generated by the high isolation Bi-EDFA and the bidirectional asymmetry of the transmission link caused by the high isolation Bi-EDFA will deteriorate the stability of the system.The calculated results show that under the influence of ASE noise,the frequency instability of a 1200 km system composed of 15 high isolation Bi-EDFAs is 1.773×10^(-13)/1 s.And the instability caused by asymmetry is 2.6064×10^(-16)/30000–35000 s if the total asymmetric length of the bidirectional link length is 30 m.The intensity noises originating from the laser and detector,the transfer delay fluctuations caused by the variation in ambient temperature and the jitter in laser output wavelength are also studied.The experiment composed of three high isolation Bi-EDFAs is done to confirm the theoretical analysis.In summary,the paper shows that the short-term instability of the T/F synchronization system composed of high isolation Bi-EDFAs is limited by the accumulation of ASE noise of amplifiers and the laser frequency drift,while the long-term instability is limited by the periodic variation in ambient temperature and the asymmetry of the amplifiers.The research results are useful for pointing out the direction to improve the stability of the fiber-optic T/F synchronization system.
