Accurate quantification of the spin–orbit torques(SOTs) is critical for the identification and applications of new spin-orbitronic effects. One of the most popular techniques to quantify the SOTs is the “switching a...Accurate quantification of the spin–orbit torques(SOTs) is critical for the identification and applications of new spin-orbitronic effects. One of the most popular techniques to quantify the SOTs is the “switching angle shift”, where the applied direct current is assumed to shift, via domain wall depinning during anti-domain expansion, the switching angle of a perpendicular magnetization in a linear proportional manner under a large rotating magnetic field. Here, we report that, for the most commonly employed perpendicular magnetization heterostructures in spintronics(e.g., those based on FeCoB, Co, and Co/Ni multilayers), the switching angle shift considerably misestimates the SOT within the domain wall depinning analysis of the slope of linear-in-current scaling and may also have a non-zero residual value at zero direct current. Our experiments and simulations unveil that the switching angle shift is most likely dominated by chiral asymmetric nucleation rather than expansion of anti-domains. The in-plane field from external magnets and current-induced SOTs lowers the perpendicular nucleation field and thus reduces the required switching angle, ultimately leading to an underestimation of SOTs by domain wall depinning analysis. These results have advanced our understanding of magnetization switching in spintronic devices.展开更多
The electromagnetic torque and speed in Switched Reluctance Motor (SRM) greatly depend on the excitation parametersi.e. turn-on angle, turn-off angle, dwell angle and magnitude of the phase currents of its phases...The electromagnetic torque and speed in Switched Reluctance Motor (SRM) greatly depend on the excitation parametersi.e. turn-on angle, turn-off angle, dwell angle and magnitude of the phase currents of its phases. At lower speeds, a change in the current contributes the torque requirement which can be achieved either by voltage control (pulse width modulation) or instantaneous current control techniques. At high speeds, due to high back EMF, the regulation of current is crucial and achieved with the control of switching angles of phases. This type of control is referred as average torque control, where the torque is averaged over one stroke (2π/N<sub>r</sub>). With constant dwell angle, advancing the phase angle influences the current into the phase winding at minimum inductance position. It has more time to get the current out of the phase winding before the rotor reaches the negative inductance slope. To maintain the speed of the motor at different load conditions, the turn-on and turn-off angles are adaptively varied. The change in dwell angle may be required where the turn-on and turn-off angle may not be sufficient to reach the required speed. In this paper, a new algorithm is proposed for self tuning of switching parameters of SRM. The proposed algorithm is simulated in MATLAB-Simulink and experimentally validated with Field Programmable Gated Array (FPGA) using MATLAB- system generator environment.展开更多
The Cenozoic geological hallmark of Western Yunnan is the characteristic voluminous Late Cretaceous-Eocene granites;however, their geological background and petrogenesis have not been well constrained and elucidated. ...The Cenozoic geological hallmark of Western Yunnan is the characteristic voluminous Late Cretaceous-Eocene granites;however, their geological background and petrogenesis have not been well constrained and elucidated. In this study, we present new zircon U-Pb dating, along with geochemical and Sr-Nd-Hf isotopic data for granites from the Tengchong–Lianghe granitoid belt(as abbreviated to Tengliang belt) and West Yingjiang batholiths from the Tengchong block. The mineralogical and geochemical features of the Tengliang granites and the West Yingjiang batholiths are ascribed to aluminous S-type granites and weak peraluminous I-type, respectively. Zircon U-Pb analyses yielded consistent ages ranging from 67.5 Ma, 68.4 Ma and 66.2 Ma from the Tengliang granitoid belt and 50.4 Ma to 60.8 Ma for three samples from the west Yingjiang batholiths. The Tengliang granites were emplaced during the Late Cretaceous(68-66 Ma) and demonstrate negative ε_(Hf)(t) values(-24 to-4) and initial ~(87)Sr/~(86)Sr ratios of 0.7101–0.7139 and significant negative ε_(Nd)(t) values from-8.91 to-13.2, indicating a Proterozoic sedimentary source or enriched components. The hornblende-bearing I-type granites from West Yingjiang are characterized by lower initial ~(87)Sr/~(86)Sr ratios of 0.7076–0.7106, compared to Tengliang granite and negative whole-rock ε_(Nd)(t) values from-4.0 to-11.9. The early Eocene west Yingjiang gneissic granites show wide ranges of ε_(Hf)(t) values from +7.4 to-8.5 and T_(2DM) of 1.30–0.65 Ga, indicating partial melting of ancient crust with contributions of depleted mantle materials. In combination with the regional background and previous studies, we propose that such a spatio-temporal distribution of the Tengchong granitoid belt might be related to the rollback or angleswitching of the Neo-Tethyan subducting slab. This study sheds new light on the evolutionary history of the Tengchong block.展开更多
The various configurations of multilevel inverter involve the use of more numbers of switching devices, energy storage devices and/or unidirectional devices. Each switching unit necessitates the add-on driver circuit ...The various configurations of multilevel inverter involve the use of more numbers of switching devices, energy storage devices and/or unidirectional devices. Each switching unit necessitates the add-on driver circuit for proper functionality. Cascaded H-Bridge Multilevel Inverter requires overlapped switching pulses for the switching devices in positive and negative arms of the bridge which may lead to short circuit during the device failure. This work addresses the problems in different configurations of multilevel inverter by using reduced number of switching and energy storage devices and driver circuits. In the present approach Single Switch is used for each stair case positive output and single H-Bridge for phase reversal. Driver circuits are reduced by using the property of body diode of the MOSFET. Switching pulses are generated by Arduino Development Board. The circuit is simulated using Matlab. More so, through experimental means, it is physically tested and results are analyzed for the 5-step inverter and thereby simulation is fully validated. Consequently, cycloconverter operation of the circuit is simulated using Matlab. Moreover, half bridge configuration of the multilevel inverter is also analyzed for high frequency induction heating applications.展开更多
We propose the active metasurface using phase-change material Ge2Sb2Te5（GST）, which has two distinct phases so called amorphous and crystalline phases, for an ultrathin light path switching device. By arranging mult...We propose the active metasurface using phase-change material Ge2Sb2Te5（GST）, which has two distinct phases so called amorphous and crystalline phases, for an ultrathin light path switching device. By arranging multiple anisotropic GST nanorods, the gradient metasurface, which has opposite directions of phase gradients at the two distinct phases of GST, is demonstrated theoretically and numerically. As a result, in the case of normal incidence of circularly polarized light at the wavelength of 1650 nm, the cross-polarized light deflects to-55.6° at the amorphous phase and ＋55.6° at the crystalline phase with the signal-to-noise ratio above 10 dB.展开更多
基金supported by the National Key Research and Development Program of China (Grant No.2022YFA1204000)partly by the National Natural Science Foundation of China (Grant Nos.12274405,12304155,and 12393831)the Beijing Natural Science Foundation (Grant No.Z230006)。
文摘Accurate quantification of the spin–orbit torques(SOTs) is critical for the identification and applications of new spin-orbitronic effects. One of the most popular techniques to quantify the SOTs is the “switching angle shift”, where the applied direct current is assumed to shift, via domain wall depinning during anti-domain expansion, the switching angle of a perpendicular magnetization in a linear proportional manner under a large rotating magnetic field. Here, we report that, for the most commonly employed perpendicular magnetization heterostructures in spintronics(e.g., those based on FeCoB, Co, and Co/Ni multilayers), the switching angle shift considerably misestimates the SOT within the domain wall depinning analysis of the slope of linear-in-current scaling and may also have a non-zero residual value at zero direct current. Our experiments and simulations unveil that the switching angle shift is most likely dominated by chiral asymmetric nucleation rather than expansion of anti-domains. The in-plane field from external magnets and current-induced SOTs lowers the perpendicular nucleation field and thus reduces the required switching angle, ultimately leading to an underestimation of SOTs by domain wall depinning analysis. These results have advanced our understanding of magnetization switching in spintronic devices.
文摘The electromagnetic torque and speed in Switched Reluctance Motor (SRM) greatly depend on the excitation parametersi.e. turn-on angle, turn-off angle, dwell angle and magnitude of the phase currents of its phases. At lower speeds, a change in the current contributes the torque requirement which can be achieved either by voltage control (pulse width modulation) or instantaneous current control techniques. At high speeds, due to high back EMF, the regulation of current is crucial and achieved with the control of switching angles of phases. This type of control is referred as average torque control, where the torque is averaged over one stroke (2π/N<sub>r</sub>). With constant dwell angle, advancing the phase angle influences the current into the phase winding at minimum inductance position. It has more time to get the current out of the phase winding before the rotor reaches the negative inductance slope. To maintain the speed of the motor at different load conditions, the turn-on and turn-off angles are adaptively varied. The change in dwell angle may be required where the turn-on and turn-off angle may not be sufficient to reach the required speed. In this paper, a new algorithm is proposed for self tuning of switching parameters of SRM. The proposed algorithm is simulated in MATLAB-Simulink and experimentally validated with Field Programmable Gated Array (FPGA) using MATLAB- system generator environment.
基金the financial support provided by the open fund from the Key Laboratory of Deep-Earth Dynamics of the Ministry of Natural Resources, Institute of Geology, as well as Chinese Academy of Geological Sciences (Grant No. J1901-16)the State Key Laboratory for Mineral Deposits Research, Nanjing University (Grant No. 2020-LAMD-K04)+1 种基金the National Natural Science Foundation of China (Grant No. 41403029)The support provided by the China Scholarship Council (CSC) during a visit to the University of Arizona (201709110012)。
文摘The Cenozoic geological hallmark of Western Yunnan is the characteristic voluminous Late Cretaceous-Eocene granites;however, their geological background and petrogenesis have not been well constrained and elucidated. In this study, we present new zircon U-Pb dating, along with geochemical and Sr-Nd-Hf isotopic data for granites from the Tengchong–Lianghe granitoid belt(as abbreviated to Tengliang belt) and West Yingjiang batholiths from the Tengchong block. The mineralogical and geochemical features of the Tengliang granites and the West Yingjiang batholiths are ascribed to aluminous S-type granites and weak peraluminous I-type, respectively. Zircon U-Pb analyses yielded consistent ages ranging from 67.5 Ma, 68.4 Ma and 66.2 Ma from the Tengliang granitoid belt and 50.4 Ma to 60.8 Ma for three samples from the west Yingjiang batholiths. The Tengliang granites were emplaced during the Late Cretaceous(68-66 Ma) and demonstrate negative ε_(Hf)(t) values(-24 to-4) and initial ~(87)Sr/~(86)Sr ratios of 0.7101–0.7139 and significant negative ε_(Nd)(t) values from-8.91 to-13.2, indicating a Proterozoic sedimentary source or enriched components. The hornblende-bearing I-type granites from West Yingjiang are characterized by lower initial ~(87)Sr/~(86)Sr ratios of 0.7076–0.7106, compared to Tengliang granite and negative whole-rock ε_(Nd)(t) values from-4.0 to-11.9. The early Eocene west Yingjiang gneissic granites show wide ranges of ε_(Hf)(t) values from +7.4 to-8.5 and T_(2DM) of 1.30–0.65 Ga, indicating partial melting of ancient crust with contributions of depleted mantle materials. In combination with the regional background and previous studies, we propose that such a spatio-temporal distribution of the Tengchong granitoid belt might be related to the rollback or angleswitching of the Neo-Tethyan subducting slab. This study sheds new light on the evolutionary history of the Tengchong block.
文摘The various configurations of multilevel inverter involve the use of more numbers of switching devices, energy storage devices and/or unidirectional devices. Each switching unit necessitates the add-on driver circuit for proper functionality. Cascaded H-Bridge Multilevel Inverter requires overlapped switching pulses for the switching devices in positive and negative arms of the bridge which may lead to short circuit during the device failure. This work addresses the problems in different configurations of multilevel inverter by using reduced number of switching and energy storage devices and driver circuits. In the present approach Single Switch is used for each stair case positive output and single H-Bridge for phase reversal. Driver circuits are reduced by using the property of body diode of the MOSFET. Switching pulses are generated by Arduino Development Board. The circuit is simulated using Matlab. More so, through experimental means, it is physically tested and results are analyzed for the 5-step inverter and thereby simulation is fully validated. Consequently, cycloconverter operation of the circuit is simulated using Matlab. Moreover, half bridge configuration of the multilevel inverter is also analyzed for high frequency induction heating applications.
基金supported by the Center for Advanced Meta-Materials(CAMM) funded by the Ministry of Science,ICT and Future Planning as Global Frontier Project(Grant No.CAMM-2014M3A6B3063710)by the National Research Foundation of Korea(NRF)grant funded by the Korea government Ministry of Science and ICT(Grant No.2017R1A4A1015565)
文摘We propose the active metasurface using phase-change material Ge2Sb2Te5（GST）, which has two distinct phases so called amorphous and crystalline phases, for an ultrathin light path switching device. By arranging multiple anisotropic GST nanorods, the gradient metasurface, which has opposite directions of phase gradients at the two distinct phases of GST, is demonstrated theoretically and numerically. As a result, in the case of normal incidence of circularly polarized light at the wavelength of 1650 nm, the cross-polarized light deflects to-55.6° at the amorphous phase and ＋55.6° at the crystalline phase with the signal-to-noise ratio above 10 dB.
