This paper presents the single element dual band switched beam textile antenna.The antenna can operate at frequencies of 0.7 and 2.6 GHz using for 5G wireless communication applications.Textile fabric is considered to...This paper presents the single element dual band switched beam textile antenna.The antenna can operate at frequencies of 0.7 and 2.6 GHz using for 5G wireless communication applications.Textile fabric is considered to be used for substrate layer at the parts of a microstrip antenna for wireless body area network.The beam pattern of antenna can be switched into two directions by changing the position of shorted-circuit points at each edge of antenna.The main beam direction is 45°/225°when corner A is shorted while it steers at 135°/315°when corner B is shorted circuit.The advantage of the proposed antenna is the decrease of the problems like interference,light weight,flexibility and ability to switch beam easily.In addition,the results of the fabricated antenna are compared with the simulated ones.Moreover,the antenna is bent with curvature radius of 6 mm in forward direction.The effects of the bent antenna are studied.The results can confirm that radiation patterns of the bending antenna can be pointed into two directions when changing the positions of shorted circuit.Therefore,the proposed antenna can switch beam patterns,it is flexible,and it can operate at dual-band frequency on textile.展开更多
A novel method for designing a beam-switching antenna with the plane dipole is presented. The antenna is composed of double dipoles placed at the center of an active square structure that is divided in four equal sect...A novel method for designing a beam-switching antenna with the plane dipole is presented. The antenna is composed of double dipoles placed at the center of an active square structure that is divided in four equal sectors by metallic sheets. Metallic patches at the outside of the structure are used to enhance the radiation performance of the antenna. In each step, the diodes in one sector are on, whereas other diodes are off. The sector with off-state diodes defines the direction of the radiation pattern. An antenna model is designed on the substrate of FR4. The proposed antenna operates from 4.8 GHz to 5.5 GHz with gain of 6.3 dBi and F/B （front to back ratio） of 13.2 dBi when the operating frequency is 5.2 GHz. The antenna radiation pattern can be swept in the entire azimuth plane in four steps with a 3 dB beamwidth of 90%. The results reveal that the antenna could be used in the base station of the wireless communication systems.展开更多
This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE)...This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE), which is proposed for wireless indoor applications. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. The PAFMSTE is used to obtain optimal directivity in four directions in azimuth plane with 3 dB beamwidth of 90°at a specific orientation of 30°in elevation plane. Switched parasitic technique is used to enable PAFMSTE to steer a directional beam through four locations by using four PIN diodes switches. The High Frequency Structure Simulator (HFSS) is used as an efficient simulation tool to optimize the performance of the PAFMSTE antenna. The fabrication and measurements of the PAFMSTE antenna are introduced. The proposed antenna enable radio positioning via Angle of Arrival (AOA) information collected from nearby devices. Then, the Cramér-Rao Bound (CRB) is presented for AOA estimation using identically and equally spaced antenna elements. The CRB depends on the directivity, where the maximum values of CRB are 1.35 × 10<sup>-3</sup> and 8 × 10<sup>-3</sup> at HPBW of 60° and 90°, respectively.展开更多
Considering the effect of crack gap, the bending deformation of the Timoshenko beam with switching cracks is studied. To represent a crack with gap as a nonlinear unidirectional rotational spring, the equivalent flexu...Considering the effect of crack gap, the bending deformation of the Timoshenko beam with switching cracks is studied. To represent a crack with gap as a nonlinear unidirectional rotational spring, the equivalent flexural rigidity of the cracked beam is derived with the generalized Dirac delta function. A closed-form general solution is obtained for bending of a Timoshenko beam with an arbitrary number of switching cracks. Three examples of bending of the Timoshenko beam are presented. The influence of the beam＇s slenderness ratio, the crack＇s depth, and the external load on the crack state and bending performances of the cracked beam is analyzed. It is revealed that a cusp exists on the deflection curve, and a jump on the rotation angle curve occurs at a crack location. The relation between the beam＇s deflection and load is bilinear, each part corresponding to an open or closed state of crack, respectively. When the crack is open, flexibility of the cracked beam decreases with the increase of the beam＇s slenderness ratio and the decrease of the crack depth. The results are useful in identifying non-destructive cracks on a beam.展开更多
A dual S shaped micro strip antenna with a realistic feed is proposed for generation of tilted beam radiation pattern pertaining for beam steering applications. To achieve this, four feeding points are located at a di...A dual S shaped micro strip antenna with a realistic feed is proposed for generation of tilted beam radiation pattern pertaining for beam steering applications. To achieve this, four feeding points are located at a distance of 5.6 mm from the antenna centre. These feeding points when excited one by one generate four tilted beams in four different space quadrants, thus yielding a beam steerable antenna, Importantly, since the proposed antenna is symmetrical in the structure, all the four tilted beams have the same radiation pattern characteristics. A further enhancement of the antenna bandwidth is also achieved using 100-μn capacitive coupling between the feed and the antenna strip.展开更多
基金This work is funded from the Thailand Science Research and Innovation through the research grant No.036/2564,https://www.tsri.or.th/.
文摘This paper presents the single element dual band switched beam textile antenna.The antenna can operate at frequencies of 0.7 and 2.6 GHz using for 5G wireless communication applications.Textile fabric is considered to be used for substrate layer at the parts of a microstrip antenna for wireless body area network.The beam pattern of antenna can be switched into two directions by changing the position of shorted-circuit points at each edge of antenna.The main beam direction is 45°/225°when corner A is shorted while it steers at 135°/315°when corner B is shorted circuit.The advantage of the proposed antenna is the decrease of the problems like interference,light weight,flexibility and ability to switch beam easily.In addition,the results of the fabricated antenna are compared with the simulated ones.Moreover,the antenna is bent with curvature radius of 6 mm in forward direction.The effects of the bent antenna are studied.The results can confirm that radiation patterns of the bending antenna can be pointed into two directions when changing the positions of shorted circuit.Therefore,the proposed antenna can switch beam patterns,it is flexible,and it can operate at dual-band frequency on textile.
基金supported by the Chongqing Municipal Science and Technology Commission of Natural Science Foundation of China under Grant No.cstcjjA40013
文摘A novel method for designing a beam-switching antenna with the plane dipole is presented. The antenna is composed of double dipoles placed at the center of an active square structure that is divided in four equal sectors by metallic sheets. Metallic patches at the outside of the structure are used to enhance the radiation performance of the antenna. In each step, the diodes in one sector are on, whereas other diodes are off. The sector with off-state diodes defines the direction of the radiation pattern. An antenna model is designed on the substrate of FR4. The proposed antenna operates from 4.8 GHz to 5.5 GHz with gain of 6.3 dBi and F/B （front to back ratio） of 13.2 dBi when the operating frequency is 5.2 GHz. The antenna radiation pattern can be swept in the entire azimuth plane in four steps with a 3 dB beamwidth of 90%. The results reveal that the antenna could be used in the base station of the wireless communication systems.
文摘This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE), which is proposed for wireless indoor applications. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. The PAFMSTE is used to obtain optimal directivity in four directions in azimuth plane with 3 dB beamwidth of 90°at a specific orientation of 30°in elevation plane. Switched parasitic technique is used to enable PAFMSTE to steer a directional beam through four locations by using four PIN diodes switches. The High Frequency Structure Simulator (HFSS) is used as an efficient simulation tool to optimize the performance of the PAFMSTE antenna. The fabrication and measurements of the PAFMSTE antenna are introduced. The proposed antenna enable radio positioning via Angle of Arrival (AOA) information collected from nearby devices. Then, the Cramér-Rao Bound (CRB) is presented for AOA estimation using identically and equally spaced antenna elements. The CRB depends on the directivity, where the maximum values of CRB are 1.35 × 10<sup>-3</sup> and 8 × 10<sup>-3</sup> at HPBW of 60° and 90°, respectively.
文摘Considering the effect of crack gap, the bending deformation of the Timoshenko beam with switching cracks is studied. To represent a crack with gap as a nonlinear unidirectional rotational spring, the equivalent flexural rigidity of the cracked beam is derived with the generalized Dirac delta function. A closed-form general solution is obtained for bending of a Timoshenko beam with an arbitrary number of switching cracks. Three examples of bending of the Timoshenko beam are presented. The influence of the beam＇s slenderness ratio, the crack＇s depth, and the external load on the crack state and bending performances of the cracked beam is analyzed. It is revealed that a cusp exists on the deflection curve, and a jump on the rotation angle curve occurs at a crack location. The relation between the beam＇s deflection and load is bilinear, each part corresponding to an open or closed state of crack, respectively. When the crack is open, flexibility of the cracked beam decreases with the increase of the beam＇s slenderness ratio and the decrease of the crack depth. The results are useful in identifying non-destructive cracks on a beam.
基金the European Union through the Welsh As-sembly Government
文摘A dual S shaped micro strip antenna with a realistic feed is proposed for generation of tilted beam radiation pattern pertaining for beam steering applications. To achieve this, four feeding points are located at a distance of 5.6 mm from the antenna centre. These feeding points when excited one by one generate four tilted beams in four different space quadrants, thus yielding a beam steerable antenna, Importantly, since the proposed antenna is symmetrical in the structure, all the four tilted beams have the same radiation pattern characteristics. A further enhancement of the antenna bandwidth is also achieved using 100-μn capacitive coupling between the feed and the antenna strip.
