The surface chemical properties of CeO2 and Pr6O11 have been investigated with FT-IR spectroscopy. The reactivities of surface hydroxyls were tested through the reaction of CO. Surface formate species are formed on Ce...The surface chemical properties of CeO2 and Pr6O11 have been investigated with FT-IR spectroscopy. The reactivities of surface hydroxyls were tested through the reaction of CO. Surface formate species are formed on CeO2 and Pr6O11 under CO atmosphere at 200℃ . and the reaction becomcs more prevailing at higher temperatures especially for partially reduced samples. The surface formate species are produced via the reaction of CO with surface hydroxyls which was confirmed by the reaction of CO with D2-treated CeO2 and Pr6O11. The Surface formate can be oxidized to carbonate at temperatures exceeding 300 ℃, and the surface hydroxyls could be recovered as the formate species decompose or are oxidized to carbonate species. The roles played by the surface hydroxyls and surface active sites in the CO oxidation are discussed.展开更多
MgH2 is a promising and popular hydrogen storage material.In this work,the hydrogen desorption reactions of a single Pd atom adsorbed MgH2(110)surface are investigated by using first-principles density functional theo...MgH2 is a promising and popular hydrogen storage material.In this work,the hydrogen desorption reactions of a single Pd atom adsorbed MgH2(110)surface are investigated by using first-principles density functional theory calculations.We find that a single Pd atom adsorbed on the MgH2(110)surface can significantly lower the energy barrier of the hydrogen desorption reactions from 1.802 eV for pure MgH2(110)surface to 1.154 eV for Pd adsorbed MgH2(110)surface,indicating a strong Pd single-atom catalytic effect on the hydrogen desorption reactions.Furthermore,the Pd single-atom catalysis significantly reduces the hydrogen desorption temperature from 573K to 367K,which makes the hydrogen desorption reactions occur more easily and quickly on the MgH2(110)surface.We also discuss the microscopic process of the hydrogen desorption reactions through the reverse process of hydrogen spillover mechanism on the MgH2(110)surface.This study shows that Pd/MgH2 thin films can be used as good hydrogen storage materials in future experiments.展开更多
Since the D-band center theory was proposed,it has been widely used in the fields of surface chemistry by almost all researchers,due to its easy understanding,convenient operation and relative accuracy.However,with th...Since the D-band center theory was proposed,it has been widely used in the fields of surface chemistry by almost all researchers,due to its easy understanding,convenient operation and relative accuracy.However,with the continuous development of material systems and modification strategies,researchers have gradually found that D-band center theory is usually effective for large metal particle systems,but for small metal particle systems or semiconductors,such as single atom systems,the opposite conclusion to the D-band center theory is often obtained.To solve the issue above,here we propose a bonding and anti-bonding orbitals stable electron intensity difference(BASED)theory for surface chemistry.The newly-proposed BASED theory can not only successfully explain the abnormal phenomena of D-band center theory,but also exhibits a higher accuracy for prediction of adsorption energy and bond length of intermediates on active sites.Importantly,a new phenomenon of the spin transition state in the adsorption process is observed based on the BASED theory,where the active center atom usually yields an unstable high spin transition state to enhance its adsorption capability in the adsorption process of intermediates when their distance is about 2.5Å.In short,the BASED theory can be considered as a general principle to understand catalytic mechanism of intermediates on surfaces.展开更多
Recent development of the dynamic analysis technique has made it possible to measure separately kinetic parameters of a catalytic reaction as well as to study the effect of catalyst preparation parameters. But its app...Recent development of the dynamic analysis technique has made it possible to measure separately kinetic parameters of a catalytic reaction as well as to study the effect of catalyst preparation parameters. But its application is still limned to first-order reaction. This work is aimed to demonstrate in some detail that,by comparison of the reaction rate expressions with the two-step mechanism used in catalytic kinetics and dynamic analysis, these methods can be extended to non-first-order reaction, and the kinetic parameters measured by dynamic techniques are interpreted for different reaction mechanisms.展开更多
Intercalation catalysis research involves inserting metal ions,molecules,or ionic liquids into the layered structure of catalysts to adjust their electronic structure and surface properties,thereby optimizing catalyti...Intercalation catalysis research involves inserting metal ions,molecules,or ionic liquids into the layered structure of catalysts to adjust their electronic structure and surface properties,thereby optimizing catalytic reaction efficiency and selectivity[1–3].This technique has achieved significant progress in areas such as electrocatalysis,catalytic cracking,and energy conversion,especially in reactions like hydrogen generation,oxygen reduction,nitrogen reduction,and carbon dioxide reduction[4–6].Intercalation catalysis can enhance catalyst activity and selectivity,but challenges remain regarding stability,reusability,and industrial application.Future research will focus on developing new intercalation materials,optimizing catalyst design,and exploring their potential applications in complex environments[7].展开更多
The visible light photo-Fenton-like catalytic performance of BiFeO3 nanoparticles was investigated using Methyl Violet （MV）, Rhodamine B （RhB） and phenol as probes. Under optimum conditions, the pseudo first-order...The visible light photo-Fenton-like catalytic performance of BiFeO3 nanoparticles was investigated using Methyl Violet （MV）, Rhodamine B （RhB） and phenol as probes. Under optimum conditions, the pseudo first-order rate constant （k） was determined to be 2.21 × 10^-2, 5.56 × 10^-2 and 2.01 × 10^-2 min〈 for the degradation of MV （30 μmol/L）, RhB （10 μmol/L） and phenol （3 mmol/L）, respectively, in the BiFeO3-H202-visible light （Vis） system. The introduction of visible light irradiation increased the k values of MV, RhB and phenol degradation 3.47, 1.95 and 2.07 times in comparison with those in dark. Generally, the k values in the BiFeO3- H202-Vis system were accelerated by increasing BiFeO3 load and H202 concentration, but decreased with increasing initial pollutant concentration. To further enhance the degradation of pollutants at high concentrations, BiFeO3 was modified with the addition of surface modifiers. The addition of ethylenediamineteraacetic acid （EDTA, 0.4 mmol/L） increased the k value of MV degradation （60 μmol/L） from 1.01 × 10.2 min^-1 in the BiFeO3-H202-Vis system to 1.30 min^-1 in the EDTA-BiFeO3-H2O2-Vis system by a factor of 128. This suggests that in situ surface modification can enable BiFeO3 nano-particles to be a promising visible light photo-Fenton-like catalyst for the degradation of organic pollutants.展开更多
The adsorption and reaction of formic acid （HCOOH） on clean and atomic oxygen‐covered Au（997） surfaces were studied by temperature‐programmed desorption/reaction spectroscopy （TPRS） and X‐ray photoelectron sp...The adsorption and reaction of formic acid （HCOOH） on clean and atomic oxygen‐covered Au（997） surfaces were studied by temperature‐programmed desorption/reaction spectroscopy （TPRS） and X‐ray photoelectron spectroscopy （XPS）. At 105 K, HCOOH molecularly adsorbs on clean Au（997） and interacts more strongly with low‐coordinated Au atoms at （111） step sites than with those at （111） terrace sites. On an atomic oxygen‐covered Au（997） surface, HCOOH reacts with oxygen at‐oms to form HCOO and OH at 105 K. Upon subsequent heating, surface reactions occur among ad‐sorbed HCOO, OH, and atomic oxygen and produce CO2, H2O, and HCOOH between 250 and 400 K. The Au（111） steps bind surface adsorbates more strongly than the Au（111） terraces and exhibit larger barriers for HCOO（a） oxidation reactions. The surface reactions also depend on the relative coverages of co‐existing surface species. Our results elucidate the elementary surface reactions between formic acid and oxygen adatoms on Au surfaces and highlight the effects of the coordina‐tion number of the Au atoms on the Au catalysis.展开更多
Effects of Zr/Ti molar ratio in SO42-/ZrO2-TiO2 solid acid catalyst calcined at different temperatures on its surface properties and catalytic activity were thoroughly investigated in this paper. The physicochemical c...Effects of Zr/Ti molar ratio in SO42-/ZrO2-TiO2 solid acid catalyst calcined at different temperatures on its surface properties and catalytic activity were thoroughly investigated in this paper. The physicochemical characteristics of prepared samples were determined by N2 adsorptiondesorption, XRD, NH3-TPD and XPS techniques, respectively. It was found that the crystallization temperature of the samples increased after the combination of ZrO2 and TiO2; and phase transformations from the anatase to the rutile of TiO2 species and the tetragonal to the monoclinic of ZrO2 species were effectively suppressed at higher temperature. The sample with a Zr/Ti molar ratio of 3/1 calcined at 450℃ showed the highest surface area and the most acid sites among all the tested samples. The acid site densities of samples were relatively closed to each other if they were calcined at the same temperature, however, decreased with the calcination temperature. The result indicates that the sulfur content in samples is a crucial factor to control the acid site density. Calcining the sample at 650℃ and higher temperatures resulted in a significant desorption of sulfate ion on the samples. The synthesized samples were evaluated as a potential catalyst for glucose conversion under the near-critical methanol conditions （200℃/4 MPa）. The results suggested that the relatively weaker acid sites of the catalyst were more favorable for the accumulation of methyl glucosides, while the moderate acid sites were responsible for the formation of methyl levulinate. The catalytic activity for methyl levulinate production almost increases linearly with the catalyst acid site density. The catalyst deactivation is due to the loss of sulfate ion and the two catalysts with Zr/Ti molar ratios of 3/1 and 1/3 could effectively alleviate the deactivation caused by sulfate solution in the reaction medium and can be reused after calcination with the reuse rate of over 90% in terms of the methyl levulinate selectivity.展开更多
It is well known that two-dimensional(2D)MXene-derived quan-tum dots(MQDs)inherit the excellent physicochemical properties of the parental MXenes,as a Chinese proverb says,“Indigo blue is extracted from the indigo pl...It is well known that two-dimensional(2D)MXene-derived quan-tum dots(MQDs)inherit the excellent physicochemical properties of the parental MXenes,as a Chinese proverb says,“Indigo blue is extracted from the indigo plant,but is bluer than the plant it comes from.”Therefore,0D QDs harvest larger surface-to-volume ratio,outstanding optical properties,and vigorous quantum confinement effect.Currently,MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics,chemistry,biology,energy conversion,and storage.Since the surface properties of small-sized MQDs include the type of surface functional groups,the functionalized surface directly determines their performance.As the Nobel Laureate Wolfgang Pauli says,“God made the bulk,but the surface was invented by the devil,”and it is just on the basis of the abundant surface functional groups,there is lots of space to be thereof excavated from MQDs.We are witnessing such excellence and even more promising to be expected.Nowadays,MQDs have been widely applied to catalysis,whereas the related reviews are rarely reported.Herein,we provide a state-of-the-art overview of MQDs in catalysis over the past five years,ranging from the origin and development of MQDs,synthetic routes of MQDs,and functionalized MQDs to advanced characterization techniques.To explore the diversity of catalytic application and perspectives of MQDs,our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.展开更多
The sluggish kinetics of multiphase sulfur conversion with homogeneous and heterogeneous electrochemical processes,causing the“shuttle effect”of soluble polysulfide species(PSs),is the challenges in terms of lithium...The sluggish kinetics of multiphase sulfur conversion with homogeneous and heterogeneous electrochemical processes,causing the“shuttle effect”of soluble polysulfide species(PSs),is the challenges in terms of lithium-sulfur batteries(LSBs).In this paper,a Mn_(3)O_(4-x) catalyst,which has much higher activity for heterogeneous reactions than for homogeneous reactions(namely,preferentialactivity catalysts),is designed by surface engineering with rational oxygen vacancies.Due to the rational design of the electronic structure,the Mn_(3)O_(4-x) catalyst prefers to accelerate the conversion of Li2S4 into Li_(2)S_(2)/Li_(2)S and optimize Li_(2)S deposition,reducing the accumulation of PSs and thus suppressing the“shuttle effect.”Both density functional theory calculations and in situ X-ray diffraction measurements are used to probe the catalytic mechanism and identify the reaction intermediates of MnS and Li_(y)Mn_(z)O_(4-x) for fundamental understanding.The cell with Mn_(3)O_(4-x) delivers an ultralow attenuation rate of 0.028% per cycle over 2000 cycles at 2.5 C.Even with sulfur loadings of 4.93 and 7.10mg cm^(-2) in a lean electrolyte(8.4μL mg s^(-1)),the cell still shows an initial areal capacity of 7.3mAh cm^(-2).This study may provide a new way to develop preferential-activity heterogeneous-reaction catalysts to suppress the“shuttle effect”of the soluble PSs generated during the redox process of LSBs.展开更多
Surface chemistry focuses on the investigation of the adsorption,migration,assembly,activation,reaction,and desorption of atoms and molecules at surfaces.Surface chemistry plays the pivotal roles in both fundamental s...Surface chemistry focuses on the investigation of the adsorption,migration,assembly,activation,reaction,and desorption of atoms and molecules at surfaces.Surface chemistry plays the pivotal roles in both fundamental science and applied technology.This review will summarize the recent progresses on surface assembly,synthesis and catalysis investigated mainly by scanning tunneling microscopy and atomic force microscopy.Surface assemblies of water and small biomolecules,construction of Sierpin′ski triangles and surface chirality are summarized.On-surface synthesis of conjugated carbo-and heterocycles and other kinds of carbon nanostructures are surveyed.Surface model catalysis,including single-atom catalysis and electrochemical catalysis,are discussed at the single-atom level.展开更多
Selective coupling of methyl radicals to produce C_(2) species(C2H4 and C2H6)is a key challenge for oxidative coupling of methane(OCM).In traditional OCM reaction systems,homogeneous transformation of methyl radicals ...Selective coupling of methyl radicals to produce C_(2) species(C2H4 and C2H6)is a key challenge for oxidative coupling of methane(OCM).In traditional OCM reaction systems,homogeneous transformation of methyl radicals in O_(2)‐containing gases are uncontrollable,resulting in limited C_(2) selectivity and yield.Herein,we demonstrate that methyl radicals generated by La_(2)O_(3)at low reaction temperature can selectively couple on the surface of 5 wt%Na2WO4/SiO_(2).The controllable surface coupling against overoxidation barely changes the activity of La_(2)O_(3)but boosts the C_(2)selectivity by three times and achieves a C_(2)yield as high as 10.9%at bed temperature of only 570℃.Structure‐property studies suggest that Na_(2)WO_(4) nanoclusters are the active sites for methyl radical coupling.The strong CH_(3)·affinity of these sites can even endow some methane combustion catalysts with OCM activity.The findings of the surface coupling of methyl radicals open a new direction to develop OCM catalyst.The bifunctional OCM catalyst system,which composes of a methane activation center and a CH_(3)·coupling center,may deliver promising OCM performance at reaction temperatures below the ignition temperature of C2H6 and C2H4(~600℃)and is therefore more controllable,safer,and certainly more attractive as an actual process.展开更多
In this study,the enhancement of catalytic activity of ceria when modified with co-catalysts such as graphitic carbon nitride and silver was establishe d.The material was synthe sized using phytogenic combustion metho...In this study,the enhancement of catalytic activity of ceria when modified with co-catalysts such as graphitic carbon nitride and silver was establishe d.The material was synthe sized using phytogenic combustion method,a green alternative to the traditional preparative routes.The catalyst was characterized using XRD,FTIR,SEM,EDX,XPS and TEM techniques.The synergistic effect of the composite CeO2/g-C3 N4/Ag was tested for catalytic reduction of 4-nitrophenol in the prese nce of sodium borohydride.The reaction was carried out at room tempe rature without any light source or exte rnal stirring.The individual and combined effects of four parameters,viz.,concentration of 4-NP,amount of catalyst,amount of NaBH4 and time for the reduction of reduction 4-NP were investigated using Box-Behnken design of response surface methodology(RSM).This statistical model was used to optimize the reaction conditions for maximum reduction of 4-NP.The optimum conditions for the reduction reaction are found to be 0.01 mmol/L 4-NP,15 mg catalyst,20 mg NaBH4 and 13.7 min time interval.展开更多
Poly-p-anisidine could be easily fabricated via the oxidative polymerization reaction of p-anisidine using H_(2)O_(2)as the green oxidant.It was unexpectedly found that zinc doping could significantly improve the adso...Poly-p-anisidine could be easily fabricated via the oxidative polymerization reaction of p-anisidine using H_(2)O_(2)as the green oxidant.It was unexpectedly found that zinc doping could significantly improve the adsorption ability of the material versus heavy metals such as Pb,Cu,Pd,Ag and Hg.Results of nitrogen adsorption–desorption experiments demonstrated that Zn doping could enhance the specific surface area and mesopore amount of the prepared material,which might facilitate its absorption to metals.This work not only provides a novel material for the treatment of heavy metal-polluted water but also leads to a nice mesoporous catalyst support for environment protection and organic synthesis,i.e.the Zn-doped poly-panisidine can be employed as the catalyst support to prepare Cu@PANI-OMe/Zn or Pd@PANI-OMe/Zn for the oxidative degradation reaction of phenol or Suzuki–Miyaura coupling reactions,respectively.It discloses a new strategy for fabricating the mesoporous polyaniline materials with profound application potential.展开更多
A series of triphenylethoxysilane(TPEOS)-modified nanosheet HZSM-5 catalysts(ZN-x,x=4%,8%and16%,mass)were synthesized by chemical liquid deposition to selectively change external acidity distributions.TPEOS modificati...A series of triphenylethoxysilane(TPEOS)-modified nanosheet HZSM-5 catalysts(ZN-x,x=4%,8%and16%,mass)were synthesized by chemical liquid deposition to selectively change external acidity distributions.TPEOS modification was found to passivate some external Br?nsted and Lewis acid sites by37.8%,in which Br?nsted acid sites(BAS)were found more easily sacrificed by breaking the surface Al AO bond of bridging hydroxyl groups and forming Si AOASi bonds.The selectivity of ZN-8 catalyst for light olefins(ethylene,propylene and butene)in n-decane catalytic cracking is up to 26%(450℃,WHSV=10.95 h^(-1)),which is ca.78%higher than that of parent one.The better performance was attributed to the appropriate external acid density in ZN-8,which inhibits bimolecular hydrogen transfer reaction of light olefins on the adjacent acid sites,resulting in more olefins,few coke precursors and thus an excellent catalytic stability.展开更多
This paper describes the electroless Ni or Cu plating of some fiuoropolymer substrates through a tin-free activation process. Materials subjected to surface metallization are commercial Teflon() FEP, Nafion(), ACLAR()...This paper describes the electroless Ni or Cu plating of some fiuoropolymer substrates through a tin-free activation process. Materials subjected to surface metallization are commercial Teflon() FEP, Nafion(), ACLAR() and LaRCTM-CP1 thin films which have recently gained a large scientific and technological interest due to their excellent thermal, chemical, mechanical and dielectric properties. The original approach implemented in the present work involves: (i)the grafting of nitrogen-containing functionalities on the polymer surfaces through plasma treatments in ammonia, (ii) the direct catalysis of the so-modified surfaces via their immersion in a simple acidic PdCl2 solution (i.e. without using a prior surface sensitization in an acidic SnCl2 solution), and finally (iii) the electroless metallization itself. However, prior to the immersion in the industrial plating baths, the chemical reduction of the Pd+2 species (species covalently tethered on the nitrogen-containing groups) to metallic palladium (PdO) is shown to be a key factor in catalyzing the electroless deposition initiation. This is made by immersion in an hypophosphite (H2PO2-) solution. Wettability measurements and X-ray photoelectron spectroscopy (XPS) experiments are used to characterize every surface modification step of the developed process. A cross-hatch tape test was used to asses the adhesion strength of the electroless films that is shown qualitatively good. In addition, a fragmentation test was developed in combination with electrical measurements. Its use allows to distinguish different adhesion levels at the metal/polymer interface and to evidence the influence of some processing parameters.展开更多
Effects of noise on rate oscillations during CO oxidation on Pt（110） surface were investigated, both theoretically and numerically, by focusing on the interplay of internal noise （IN） due to stochasticity in react...Effects of noise on rate oscillations during CO oxidation on Pt（110） surface were investigated, both theoretically and numerically, by focusing on the interplay of internal noise （IN） due to stochasticity in reaction events, and external noise （EN） resulting from parameter perturbation. The surface is divided into cells of variable size which are assumed to be well mixed, and we consider the behavior inside a single cell. Attention is paid to parameter regions subthreshold of the deterministic Hopf bifurcation, where noise can induce stochastic oscillations, the signal-to-noise ratio （SNR） of which shows a maximum with the variation of noise intensity, known as coherent resonance （CR）. By stochastic normal theory, we show that IN and EN contribute in a weighted additive way to an effective noise that lead to CR, such that SNR shows a ridge shape in the D-1/√N plane, where D and 1/√N measures the strength of EN and IN, respectively. It is shown that for too large IN （EN）, CR behavior with EN （IN） no longer exists. Numerical simulations show good agreements with the theoretical results.展开更多
Nickel oxide(NiO)microsphere with a large surface area was novelly synthesized through nickel bicarbonate(Ni(HCO3)2)precursor.The obtained nickel oxide(NiO)microsphere was characterized by X-ray pattern diffraction,sc...Nickel oxide(NiO)microsphere with a large surface area was novelly synthesized through nickel bicarbonate(Ni(HCO3)2)precursor.The obtained nickel oxide(NiO)microsphere was characterized by X-ray pattern diffraction,scanning electron microscopy,CO2 temperature-programmed desorption,H2 temperature-programmed reduction,N2 adsorption/desorption and laser scattering particle size distribution analyzer.It was found that nickel oxide(NiO)synthesized by the thermal decomposition of Ni(HCO3)2through area hydrolysis,presented very nice microsphere with high surface area.The catalytic properties of obtained nickel oxide(NiO)microsphere were studied in the reaction of carbon dioxide reforming of methane where 91.3% conversion of CH4 with 93% conversion of CO2 was observed.Besides,the catalyst maintained high stability over 200 h on the stream.展开更多
Catalysis of molecular radicals is often performed in interesting experimental configurations.One possible configuration is tubular geometry.The radicals are introduced into the tubes on one side,and stable molecules ...Catalysis of molecular radicals is often performed in interesting experimental configurations.One possible configuration is tubular geometry.The radicals are introduced into the tubes on one side,and stable molecules are exhausted on the other side.The penetration depth of radicals depends on numerous parameters,so it is not always feasible to calculate it.This article presents systematic measurements of the penetration depth of oxygen atoms along tubes made from nickel,cobalt,and copper.The source of O atoms was a surfatron-type microwave plasma.The initial density of O atoms depended on the gas flow and was 0.7×10^(21)m^(-3),2.4×10^(21)m^(-3),and 4.2×10^(21)m^(-3)at the flow rates of 50,300,and 600 sccm,and pressures of 10,35,and 60 Pa,respectively.The gas temperature remained at room temperature throughout the experiments.The dissociation fraction decreased exponentially along the length of the tubes in all cases.The penetration depths for well-oxidized nickel were 1.2,1.7,and 2.4 cm,respectively.For cobalt,they were slightly lower at 1.0,1.3,and 1.6 cm,respectively,while for copper,they were 1.1,1.3,and 1.7 cm,respectively.The results were explained by gas dynamics and heterogeneous surface association.These data are useful in any attempt to estimate the loss of molecular fragments along tubes,which serve as catalysts for the association of various radicals to stable molecules.展开更多
In this paper,the residue from bamboo factory has been used to design photo-Fenton catalyst,which has the advantages of low cost and magnetic recycling.The photo-Fenton catalytic performance of the biocarbon-based cat...In this paper,the residue from bamboo factory has been used to design photo-Fenton catalyst,which has the advantages of low cost and magnetic recycling.The photo-Fenton catalytic performance of the biocarbon-based catalyst was excellent and its optimal preparation process was also explored by response surface methodology.First,bamboo-carbon fiber was selected as the photo-Fenton catalyst carrier.Subsequently,the surface of the car-bon fiber was modified,with which dopamine,nano-Fe_(3)O_(4) and nano-TiO_(2) were successively loaded by hydro-thermal method.After the single factor tests,four factors including dopamine concentration,ferric chloride mass,P25 titanium dioxide mass and liquid-solid ratio were selected as the characteristic values.The degradation efficiency of photo-Fenton catalyst to methylene blue(MB)solution was treated as the response value.After the analysis of the response surface optimization,it was shown that the significance sequence of the selected 4 factors in terms of the MB degradation efficiency was arranged as follows:dopamine concentration>liquid-solid ratio>P25 titanium dioxide quality>ferric chloride quality.The optimal process parameters of fiber-carbon catalyst were affirmed as follows:the 1.7 mg/mL concentration of dopamine,the 1.2 g mass of ferric chloride,the 0.2 g mass of P25 titanium dioxide and the liquid-solid ratio of 170 mL/g.The experiment-measured average MB degra-dation efficiency performed by the optimized catalyst was 99.3%,which was nearly similar to the model-predicted value of 98.9%.It showed that the prediction model and response surface model were accurate and reliable.The results from response surface optimization could provide a good reference to design bamboo-based Fenton-like catalyst with excellent catalytic performance.展开更多
文摘The surface chemical properties of CeO2 and Pr6O11 have been investigated with FT-IR spectroscopy. The reactivities of surface hydroxyls were tested through the reaction of CO. Surface formate species are formed on CeO2 and Pr6O11 under CO atmosphere at 200℃ . and the reaction becomcs more prevailing at higher temperatures especially for partially reduced samples. The surface formate species are produced via the reaction of CO with surface hydroxyls which was confirmed by the reaction of CO with D2-treated CeO2 and Pr6O11. The Surface formate can be oxidized to carbonate at temperatures exceeding 300 ℃, and the surface hydroxyls could be recovered as the formate species decompose or are oxidized to carbonate species. The roles played by the surface hydroxyls and surface active sites in the CO oxidation are discussed.
基金supported by the National Key Basic Research Program(No.2011CB921404)National Natural Science Foundation of China(No.21421063,No.91021004,No.21233007,No.21803066)+2 种基金Strategic Priority Research Program of Chinese Academy of Sciences(No.XDC01000000)Research Start-Up Grants(No.KY2340000094)from University of Science and Technology of Chinathe Chinese Academy of Sciences Pioneer Hundred Talents Program
文摘MgH2 is a promising and popular hydrogen storage material.In this work,the hydrogen desorption reactions of a single Pd atom adsorbed MgH2(110)surface are investigated by using first-principles density functional theory calculations.We find that a single Pd atom adsorbed on the MgH2(110)surface can significantly lower the energy barrier of the hydrogen desorption reactions from 1.802 eV for pure MgH2(110)surface to 1.154 eV for Pd adsorbed MgH2(110)surface,indicating a strong Pd single-atom catalytic effect on the hydrogen desorption reactions.Furthermore,the Pd single-atom catalysis significantly reduces the hydrogen desorption temperature from 573K to 367K,which makes the hydrogen desorption reactions occur more easily and quickly on the MgH2(110)surface.We also discuss the microscopic process of the hydrogen desorption reactions through the reverse process of hydrogen spillover mechanism on the MgH2(110)surface.This study shows that Pd/MgH2 thin films can be used as good hydrogen storage materials in future experiments.
文摘Since the D-band center theory was proposed,it has been widely used in the fields of surface chemistry by almost all researchers,due to its easy understanding,convenient operation and relative accuracy.However,with the continuous development of material systems and modification strategies,researchers have gradually found that D-band center theory is usually effective for large metal particle systems,but for small metal particle systems or semiconductors,such as single atom systems,the opposite conclusion to the D-band center theory is often obtained.To solve the issue above,here we propose a bonding and anti-bonding orbitals stable electron intensity difference(BASED)theory for surface chemistry.The newly-proposed BASED theory can not only successfully explain the abnormal phenomena of D-band center theory,but also exhibits a higher accuracy for prediction of adsorption energy and bond length of intermediates on active sites.Importantly,a new phenomenon of the spin transition state in the adsorption process is observed based on the BASED theory,where the active center atom usually yields an unstable high spin transition state to enhance its adsorption capability in the adsorption process of intermediates when their distance is about 2.5Å.In short,the BASED theory can be considered as a general principle to understand catalytic mechanism of intermediates on surfaces.
文摘Recent development of the dynamic analysis technique has made it possible to measure separately kinetic parameters of a catalytic reaction as well as to study the effect of catalyst preparation parameters. But its application is still limned to first-order reaction. This work is aimed to demonstrate in some detail that,by comparison of the reaction rate expressions with the two-step mechanism used in catalytic kinetics and dynamic analysis, these methods can be extended to non-first-order reaction, and the kinetic parameters measured by dynamic techniques are interpreted for different reaction mechanisms.
文摘Intercalation catalysis research involves inserting metal ions,molecules,or ionic liquids into the layered structure of catalysts to adjust their electronic structure and surface properties,thereby optimizing catalytic reaction efficiency and selectivity[1–3].This technique has achieved significant progress in areas such as electrocatalysis,catalytic cracking,and energy conversion,especially in reactions like hydrogen generation,oxygen reduction,nitrogen reduction,and carbon dioxide reduction[4–6].Intercalation catalysis can enhance catalyst activity and selectivity,but challenges remain regarding stability,reusability,and industrial application.Future research will focus on developing new intercalation materials,optimizing catalyst design,and exploring their potential applications in complex environments[7].
基金supported by the National Science Foundation of China (No. 21077037,21177044,81030051)
文摘The visible light photo-Fenton-like catalytic performance of BiFeO3 nanoparticles was investigated using Methyl Violet （MV）, Rhodamine B （RhB） and phenol as probes. Under optimum conditions, the pseudo first-order rate constant （k） was determined to be 2.21 × 10^-2, 5.56 × 10^-2 and 2.01 × 10^-2 min〈 for the degradation of MV （30 μmol/L）, RhB （10 μmol/L） and phenol （3 mmol/L）, respectively, in the BiFeO3-H202-visible light （Vis） system. The introduction of visible light irradiation increased the k values of MV, RhB and phenol degradation 3.47, 1.95 and 2.07 times in comparison with those in dark. Generally, the k values in the BiFeO3- H202-Vis system were accelerated by increasing BiFeO3 load and H202 concentration, but decreased with increasing initial pollutant concentration. To further enhance the degradation of pollutants at high concentrations, BiFeO3 was modified with the addition of surface modifiers. The addition of ethylenediamineteraacetic acid （EDTA, 0.4 mmol/L） increased the k value of MV degradation （60 μmol/L） from 1.01 × 10.2 min^-1 in the BiFeO3-H202-Vis system to 1.30 min^-1 in the EDTA-BiFeO3-H2O2-Vis system by a factor of 128. This suggests that in situ surface modification can enable BiFeO3 nano-particles to be a promising visible light photo-Fenton-like catalyst for the degradation of organic pollutants.
基金supported by the National Basic Research Program of China (973 Program, 2013CB933104)the National Natural Science Foundation of China (21525313, 20973161, 21373192)+1 种基金the Fundamental Research Funds for the Central Universities (WK2060030017)Collaborative In-novation Center of Suzhou Nano Science and Technology~~
文摘The adsorption and reaction of formic acid （HCOOH） on clean and atomic oxygen‐covered Au（997） surfaces were studied by temperature‐programmed desorption/reaction spectroscopy （TPRS） and X‐ray photoelectron spectroscopy （XPS）. At 105 K, HCOOH molecularly adsorbs on clean Au（997） and interacts more strongly with low‐coordinated Au atoms at （111） step sites than with those at （111） terrace sites. On an atomic oxygen‐covered Au（997） surface, HCOOH reacts with oxygen at‐oms to form HCOO and OH at 105 K. Upon subsequent heating, surface reactions occur among ad‐sorbed HCOO, OH, and atomic oxygen and produce CO2, H2O, and HCOOH between 250 and 400 K. The Au（111） steps bind surface adsorbates more strongly than the Au（111） terraces and exhibit larger barriers for HCOO（a） oxidation reactions. The surface reactions also depend on the relative coverages of co‐existing surface species. Our results elucidate the elementary surface reactions between formic acid and oxygen adatoms on Au surfaces and highlight the effects of the coordina‐tion number of the Au atoms on the Au catalysis.
基金supported by the National Key Basic Research Program (2010CB732201) from the Ministry of Science and Technology of Chinathe Natural Science Foundation of China (U0733001, 50776035)the Basic Research Foundation from the Ministry of Education for Universities (2010121077)
文摘Effects of Zr/Ti molar ratio in SO42-/ZrO2-TiO2 solid acid catalyst calcined at different temperatures on its surface properties and catalytic activity were thoroughly investigated in this paper. The physicochemical characteristics of prepared samples were determined by N2 adsorptiondesorption, XRD, NH3-TPD and XPS techniques, respectively. It was found that the crystallization temperature of the samples increased after the combination of ZrO2 and TiO2; and phase transformations from the anatase to the rutile of TiO2 species and the tetragonal to the monoclinic of ZrO2 species were effectively suppressed at higher temperature. The sample with a Zr/Ti molar ratio of 3/1 calcined at 450℃ showed the highest surface area and the most acid sites among all the tested samples. The acid site densities of samples were relatively closed to each other if they were calcined at the same temperature, however, decreased with the calcination temperature. The result indicates that the sulfur content in samples is a crucial factor to control the acid site density. Calcining the sample at 650℃ and higher temperatures resulted in a significant desorption of sulfate ion on the samples. The synthesized samples were evaluated as a potential catalyst for glucose conversion under the near-critical methanol conditions （200℃/4 MPa）. The results suggested that the relatively weaker acid sites of the catalyst were more favorable for the accumulation of methyl glucosides, while the moderate acid sites were responsible for the formation of methyl levulinate. The catalytic activity for methyl levulinate production almost increases linearly with the catalyst acid site density. The catalyst deactivation is due to the loss of sulfate ion and the two catalysts with Zr/Ti molar ratios of 3/1 and 1/3 could effectively alleviate the deactivation caused by sulfate solution in the reaction medium and can be reused after calcination with the reuse rate of over 90% in terms of the methyl levulinate selectivity.
基金supported by the National Natural Science Foundation of China(51872115,51932003)2020 International Cooperation Project of the Department of Science and Technology of Jilin Province(20200801001GH).
文摘It is well known that two-dimensional(2D)MXene-derived quan-tum dots(MQDs)inherit the excellent physicochemical properties of the parental MXenes,as a Chinese proverb says,“Indigo blue is extracted from the indigo plant,but is bluer than the plant it comes from.”Therefore,0D QDs harvest larger surface-to-volume ratio,outstanding optical properties,and vigorous quantum confinement effect.Currently,MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics,chemistry,biology,energy conversion,and storage.Since the surface properties of small-sized MQDs include the type of surface functional groups,the functionalized surface directly determines their performance.As the Nobel Laureate Wolfgang Pauli says,“God made the bulk,but the surface was invented by the devil,”and it is just on the basis of the abundant surface functional groups,there is lots of space to be thereof excavated from MQDs.We are witnessing such excellence and even more promising to be expected.Nowadays,MQDs have been widely applied to catalysis,whereas the related reviews are rarely reported.Herein,we provide a state-of-the-art overview of MQDs in catalysis over the past five years,ranging from the origin and development of MQDs,synthetic routes of MQDs,and functionalized MQDs to advanced characterization techniques.To explore the diversity of catalytic application and perspectives of MQDs,our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.
基金National Nature Science Foundation of China,Grant/Award Number:21908124。
文摘The sluggish kinetics of multiphase sulfur conversion with homogeneous and heterogeneous electrochemical processes,causing the“shuttle effect”of soluble polysulfide species(PSs),is the challenges in terms of lithium-sulfur batteries(LSBs).In this paper,a Mn_(3)O_(4-x) catalyst,which has much higher activity for heterogeneous reactions than for homogeneous reactions(namely,preferentialactivity catalysts),is designed by surface engineering with rational oxygen vacancies.Due to the rational design of the electronic structure,the Mn_(3)O_(4-x) catalyst prefers to accelerate the conversion of Li2S4 into Li_(2)S_(2)/Li_(2)S and optimize Li_(2)S deposition,reducing the accumulation of PSs and thus suppressing the“shuttle effect.”Both density functional theory calculations and in situ X-ray diffraction measurements are used to probe the catalytic mechanism and identify the reaction intermediates of MnS and Li_(y)Mn_(z)O_(4-x) for fundamental understanding.The cell with Mn_(3)O_(4-x) delivers an ultralow attenuation rate of 0.028% per cycle over 2000 cycles at 2.5 C.Even with sulfur loadings of 4.93 and 7.10mg cm^(-2) in a lean electrolyte(8.4μL mg s^(-1)),the cell still shows an initial areal capacity of 7.3mAh cm^(-2).This study may provide a new way to develop preferential-activity heterogeneous-reaction catalysts to suppress the“shuttle effect”of the soluble PSs generated during the redox process of LSBs.
基金supported by the National Natural Science Foundation of China(Nos.22225202,92356309,22132007,21991132,22172002)。
文摘Surface chemistry focuses on the investigation of the adsorption,migration,assembly,activation,reaction,and desorption of atoms and molecules at surfaces.Surface chemistry plays the pivotal roles in both fundamental science and applied technology.This review will summarize the recent progresses on surface assembly,synthesis and catalysis investigated mainly by scanning tunneling microscopy and atomic force microscopy.Surface assemblies of water and small biomolecules,construction of Sierpin′ski triangles and surface chirality are summarized.On-surface synthesis of conjugated carbo-and heterocycles and other kinds of carbon nanostructures are surveyed.Surface model catalysis,including single-atom catalysis and electrochemical catalysis,are discussed at the single-atom level.
文摘Selective coupling of methyl radicals to produce C_(2) species(C2H4 and C2H6)is a key challenge for oxidative coupling of methane(OCM).In traditional OCM reaction systems,homogeneous transformation of methyl radicals in O_(2)‐containing gases are uncontrollable,resulting in limited C_(2) selectivity and yield.Herein,we demonstrate that methyl radicals generated by La_(2)O_(3)at low reaction temperature can selectively couple on the surface of 5 wt%Na2WO4/SiO_(2).The controllable surface coupling against overoxidation barely changes the activity of La_(2)O_(3)but boosts the C_(2)selectivity by three times and achieves a C_(2)yield as high as 10.9%at bed temperature of only 570℃.Structure‐property studies suggest that Na_(2)WO_(4) nanoclusters are the active sites for methyl radical coupling.The strong CH_(3)·affinity of these sites can even endow some methane combustion catalysts with OCM activity.The findings of the surface coupling of methyl radicals open a new direction to develop OCM catalyst.The bifunctional OCM catalyst system,which composes of a methane activation center and a CH_(3)·coupling center,may deliver promising OCM performance at reaction temperatures below the ignition temperature of C2H6 and C2H4(~600℃)and is therefore more controllable,safer,and certainly more attractive as an actual process.
文摘In this study,the enhancement of catalytic activity of ceria when modified with co-catalysts such as graphitic carbon nitride and silver was establishe d.The material was synthe sized using phytogenic combustion method,a green alternative to the traditional preparative routes.The catalyst was characterized using XRD,FTIR,SEM,EDX,XPS and TEM techniques.The synergistic effect of the composite CeO2/g-C3 N4/Ag was tested for catalytic reduction of 4-nitrophenol in the prese nce of sodium borohydride.The reaction was carried out at room tempe rature without any light source or exte rnal stirring.The individual and combined effects of four parameters,viz.,concentration of 4-NP,amount of catalyst,amount of NaBH4 and time for the reduction of reduction 4-NP were investigated using Box-Behnken design of response surface methodology(RSM).This statistical model was used to optimize the reaction conditions for maximum reduction of 4-NP.The optimum conditions for the reduction reaction are found to be 0.01 mmol/L 4-NP,15 mg catalyst,20 mg NaBH4 and 13.7 min time interval.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(Yangzhou University-Chemistry)。
文摘Poly-p-anisidine could be easily fabricated via the oxidative polymerization reaction of p-anisidine using H_(2)O_(2)as the green oxidant.It was unexpectedly found that zinc doping could significantly improve the adsorption ability of the material versus heavy metals such as Pb,Cu,Pd,Ag and Hg.Results of nitrogen adsorption–desorption experiments demonstrated that Zn doping could enhance the specific surface area and mesopore amount of the prepared material,which might facilitate its absorption to metals.This work not only provides a novel material for the treatment of heavy metal-polluted water but also leads to a nice mesoporous catalyst support for environment protection and organic synthesis,i.e.the Zn-doped poly-panisidine can be employed as the catalyst support to prepare Cu@PANI-OMe/Zn or Pd@PANI-OMe/Zn for the oxidative degradation reaction of phenol or Suzuki–Miyaura coupling reactions,respectively.It discloses a new strategy for fabricating the mesoporous polyaniline materials with profound application potential.
基金Financial supports by the National Natural Science Foundation of China(21776210 and 22008055)。
文摘A series of triphenylethoxysilane(TPEOS)-modified nanosheet HZSM-5 catalysts(ZN-x,x=4%,8%and16%,mass)were synthesized by chemical liquid deposition to selectively change external acidity distributions.TPEOS modification was found to passivate some external Br?nsted and Lewis acid sites by37.8%,in which Br?nsted acid sites(BAS)were found more easily sacrificed by breaking the surface Al AO bond of bridging hydroxyl groups and forming Si AOASi bonds.The selectivity of ZN-8 catalyst for light olefins(ethylene,propylene and butene)in n-decane catalytic cracking is up to 26%(450℃,WHSV=10.95 h^(-1)),which is ca.78%higher than that of parent one.The better performance was attributed to the appropriate external acid density in ZN-8,which inhibits bimolecular hydrogen transfer reaction of light olefins on the adjacent acid sites,resulting in more olefins,few coke precursors and thus an excellent catalytic stability.
文摘This paper describes the electroless Ni or Cu plating of some fiuoropolymer substrates through a tin-free activation process. Materials subjected to surface metallization are commercial Teflon() FEP, Nafion(), ACLAR() and LaRCTM-CP1 thin films which have recently gained a large scientific and technological interest due to their excellent thermal, chemical, mechanical and dielectric properties. The original approach implemented in the present work involves: (i)the grafting of nitrogen-containing functionalities on the polymer surfaces through plasma treatments in ammonia, (ii) the direct catalysis of the so-modified surfaces via their immersion in a simple acidic PdCl2 solution (i.e. without using a prior surface sensitization in an acidic SnCl2 solution), and finally (iii) the electroless metallization itself. However, prior to the immersion in the industrial plating baths, the chemical reduction of the Pd+2 species (species covalently tethered on the nitrogen-containing groups) to metallic palladium (PdO) is shown to be a key factor in catalyzing the electroless deposition initiation. This is made by immersion in an hypophosphite (H2PO2-) solution. Wettability measurements and X-ray photoelectron spectroscopy (XPS) experiments are used to characterize every surface modification step of the developed process. A cross-hatch tape test was used to asses the adhesion strength of the electroless films that is shown qualitatively good. In addition, a fragmentation test was developed in combination with electrical measurements. Its use allows to distinguish different adhesion levels at the metal/polymer interface and to evidence the influence of some processing parameters.
文摘Effects of noise on rate oscillations during CO oxidation on Pt（110） surface were investigated, both theoretically and numerically, by focusing on the interplay of internal noise （IN） due to stochasticity in reaction events, and external noise （EN） resulting from parameter perturbation. The surface is divided into cells of variable size which are assumed to be well mixed, and we consider the behavior inside a single cell. Attention is paid to parameter regions subthreshold of the deterministic Hopf bifurcation, where noise can induce stochastic oscillations, the signal-to-noise ratio （SNR） of which shows a maximum with the variation of noise intensity, known as coherent resonance （CR）. By stochastic normal theory, we show that IN and EN contribute in a weighted additive way to an effective noise that lead to CR, such that SNR shows a ridge shape in the D-1/√N plane, where D and 1/√N measures the strength of EN and IN, respectively. It is shown that for too large IN （EN）, CR behavior with EN （IN） no longer exists. Numerical simulations show good agreements with the theoretical results.
基金Project(50872086)supported by the National Natural Science Foundation of ChinaProject(2012021006-3)supported by the Natural Science Foundation of Shanxi Province,China+1 种基金Project(2012L022)supported by the Special/Youth Foundation of Taiyuan University of Technology,ChinaProject(120238)supported by the Science and Technology Department of Taiyuan,China
文摘Nickel oxide(NiO)microsphere with a large surface area was novelly synthesized through nickel bicarbonate(Ni(HCO3)2)precursor.The obtained nickel oxide(NiO)microsphere was characterized by X-ray pattern diffraction,scanning electron microscopy,CO2 temperature-programmed desorption,H2 temperature-programmed reduction,N2 adsorption/desorption and laser scattering particle size distribution analyzer.It was found that nickel oxide(NiO)synthesized by the thermal decomposition of Ni(HCO3)2through area hydrolysis,presented very nice microsphere with high surface area.The catalytic properties of obtained nickel oxide(NiO)microsphere were studied in the reaction of carbon dioxide reforming of methane where 91.3% conversion of CH4 with 93% conversion of CO2 was observed.Besides,the catalyst maintained high stability over 200 h on the stream.
基金funded by the Slovenian Research Agency,Core Funding(No.P2-0082)and Project(No.L24487)。
文摘Catalysis of molecular radicals is often performed in interesting experimental configurations.One possible configuration is tubular geometry.The radicals are introduced into the tubes on one side,and stable molecules are exhausted on the other side.The penetration depth of radicals depends on numerous parameters,so it is not always feasible to calculate it.This article presents systematic measurements of the penetration depth of oxygen atoms along tubes made from nickel,cobalt,and copper.The source of O atoms was a surfatron-type microwave plasma.The initial density of O atoms depended on the gas flow and was 0.7×10^(21)m^(-3),2.4×10^(21)m^(-3),and 4.2×10^(21)m^(-3)at the flow rates of 50,300,and 600 sccm,and pressures of 10,35,and 60 Pa,respectively.The gas temperature remained at room temperature throughout the experiments.The dissociation fraction decreased exponentially along the length of the tubes in all cases.The penetration depths for well-oxidized nickel were 1.2,1.7,and 2.4 cm,respectively.For cobalt,they were slightly lower at 1.0,1.3,and 1.6 cm,respectively,while for copper,they were 1.1,1.3,and 1.7 cm,respectively.The results were explained by gas dynamics and heterogeneous surface association.These data are useful in any attempt to estimate the loss of molecular fragments along tubes,which serve as catalysts for the association of various radicals to stable molecules.
基金funding from Hunan Provincial Key Research and Development Program(2020WK2018)Hunan Provincial Forestry Technological Innovation Funds(XLK202107-3)+2 种基金Scientific Research Project of Hunan Education Department(19A505,21B0242)National Natural Science Foundation of China(No.21908251)Hunan Provincial Natural Science Foundation of China(No.2020JJ2058).
文摘In this paper,the residue from bamboo factory has been used to design photo-Fenton catalyst,which has the advantages of low cost and magnetic recycling.The photo-Fenton catalytic performance of the biocarbon-based catalyst was excellent and its optimal preparation process was also explored by response surface methodology.First,bamboo-carbon fiber was selected as the photo-Fenton catalyst carrier.Subsequently,the surface of the car-bon fiber was modified,with which dopamine,nano-Fe_(3)O_(4) and nano-TiO_(2) were successively loaded by hydro-thermal method.After the single factor tests,four factors including dopamine concentration,ferric chloride mass,P25 titanium dioxide mass and liquid-solid ratio were selected as the characteristic values.The degradation efficiency of photo-Fenton catalyst to methylene blue(MB)solution was treated as the response value.After the analysis of the response surface optimization,it was shown that the significance sequence of the selected 4 factors in terms of the MB degradation efficiency was arranged as follows:dopamine concentration>liquid-solid ratio>P25 titanium dioxide quality>ferric chloride quality.The optimal process parameters of fiber-carbon catalyst were affirmed as follows:the 1.7 mg/mL concentration of dopamine,the 1.2 g mass of ferric chloride,the 0.2 g mass of P25 titanium dioxide and the liquid-solid ratio of 170 mL/g.The experiment-measured average MB degra-dation efficiency performed by the optimized catalyst was 99.3%,which was nearly similar to the model-predicted value of 98.9%.It showed that the prediction model and response surface model were accurate and reliable.The results from response surface optimization could provide a good reference to design bamboo-based Fenton-like catalyst with excellent catalytic performance.
