Abstract： PAN （Polyacrylonitrile）-based carbonaceous fibers were prepared at the heat treatment temperature （HTT） range of 650 to 900 ℃. The relationships among HTT, carbon content and volume resistivity of the ...Abstract： PAN （Polyacrylonitrile）-based carbonaceous fibers were prepared at the heat treatment temperature （HTT） range of 650 to 900 ℃. The relationships among HTT, carbon content and volume resistivity of the carbonaceous fibers were investigated. The carbonaceous fibers/PTFE （Polytetrafluoroethylene） antistatic coatings were prepared by the spraying technology and the effects of carbonaceous fibers and pigments on surface resistivity of the coatings were systematically discussed. Micrographs provide insight into the antistatic mechanism of the coating. The results show that carbon content of the carbonaceous fibers increases from 68.8% to 74.8% （mass fraction） and the volume resistivity decreases drastically from 1.94× 10^-3 to 8.27× 10 ^-2.cm. The surface resistivity of the antistatic coating is adjustable between 10^5 and 10^8Ω2 to fit the different antistatic materials. Static is dissipated by a conductive network of short fibers and the tunneling effect between the neighboring fibers and conductive pigments. Conductive pigments make the conductive network more perfect and improve the antistatic ability, but insulating pigments acting as barriers for the formation of conductive channel increases the surface resistivity of the coatings. The influence of pigments on the surface resistivity drops gradually with the decrease of the carbonaceous fibers volume resistivity.展开更多
The implanted ion range, the depth profile and the film sttucture of the implanted layer were studied; the carrier concentration and the mobility were measured; the conductivity mechanism of the film implanted Fe into...The implanted ion range, the depth profile and the film sttucture of the implanted layer were studied; the carrier concentration and the mobility were measured; the conductivity mechanism of the film implanted Fe into Al_2O_3 ceramic was discussed. The conclusion is that the implanted Fe^(2+) ions move into Al_2O_3 lattice and replace Al^(3+) to form subs- titution impurities so that the ion implanted lat- tice, as compared with the original one, presents an effective negative charge which forms a negative charge center. A vacancy is bound arround it, and an acceptor is introduced in the forbidden band.展开更多
YBa_(2)Cu_(3)O_(7-x)(YBCO)films with low microwave surface resistance(RS)are essential for high temperature superconducting microwave devices.The oxygen pressure during deposition has been found to influence RS signif...YBa_(2)Cu_(3)O_(7-x)(YBCO)films with low microwave surface resistance(RS)are essential for high temperature superconducting microwave devices.The oxygen pressure during deposition has been found to influence RS significantly.In this work,we deposited highly c-axis aligned YBCO films on single crystal MgO(001)substrates under different oxygen pressures via pulsed laser ablation.Their detailed microstructure was characterized with three-dimensional reciprocal space mapping(3D-RSM)method and their microwave surface resistance was also measured with resonant cavity perturbation method.We found that the variation of oxygen pressure can affect film microstructure,including grain orientation distribution and the concentration of crystal defects.The microstructure modulation can explain RS dependence on the oxygen pressure.展开更多
In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variab...In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variable based on the change of velocity of ultrasonic pulse(Du) and impact elastic wave(Di)were defined according to the classical damage theory.The influences of stress level,loading frequency and concrete strength on damage variable were measured.The experimental results show that Du and Di both present a three-stages trend for concrete exposed to fatigue loads.Since impact elastic wave is more sensitive to the microstructure damage in stage Ⅲ,the critical damage variable,i e,the damage variable before the final fracture of concrete of Di is slightly higher than that of Du.Meanwhile,the evolution of SR of concrete exposed to fatigue loads were analyzed and the relationship between SR and Du,SR and Di of concrete exposed to fatigue loads were established.It is found that the SR of concrete was decreased with the increasing fatigue cycles,indicating that surface electrical resistance method can also be applied to describe the damage of ballastless track concrete exposed to fatigue loads.展开更多
Land use/cover change(LUCC)constitutes the spatial and temporal patterns of ecological security,and the construction of ecological networks is an effective way to ensure ecological security.Exploring the spatial and t...Land use/cover change(LUCC)constitutes the spatial and temporal patterns of ecological security,and the construction of ecological networks is an effective way to ensure ecological security.Exploring the spatial and temporal change characteristics of ecological network and analyzing the integrated relationship between LUCC and ecological security are crucial for ensuring regional ecological security.Gansu is one of the provinces with fragile ecological environment in China,and rapid changes in land use patterns in recent decades have threatened ecological security.Therefore,taking Gansu Province as the study area,this study simulated its land use pattern in 2050 using patch-generating land use simulation(PLUS)model based on the LUCC trend from 2000 to 2020 and integrated the LUCC into morphological spatial pattern analysis(MSPA)to identify ecological sources and extract the ecological corridors to construct ecological network using circuit theory.The results revealed that,according to the prediction results in 2050,the areas of cultivated land,forest land,grassland,water body,construction land,and unused land would be 63,447.52,39,510.80,148,115.18,4605.21,8368.89,and 161,752.40 km^(2),respectively.The number of ecological sources in Gansu Province would increase to 80,with a total area of 99,927.18 km^(2).The number of ecological corridors would increase to 191,with an estimated total length of 6120.66 km.Both ecological sources and ecological corridors showed a sparse distribution in the northwest and dense distribution in the southeast of the province at the spatial scale.The number of ecological pinch points would reach 312 and the total area would expect to increase to 842.84 km^(2),with the most pronounced increase in the Longdong region.Compared with 2020,the number and area of ecological barriers in 2050 would decrease significantly by 63 and 370.71 km^(2),respectively.In general,based on the prediction results,the connectivity of ecological network of Gansu Province would increase in 2050.To achieve the predicted ecological network in 2050,emphasis should be placed on the protection of cultivated land and ecological land,the establishment of ecological sources in desert areas,the reinforcement of the protection for existing ecological sources,and the construction of ecological corridors to enhance the stability of ecological network.This study provides valuable theoretical support and references for the future construction of ecological networks and regional land resource management decision-making.展开更多
In this paper a fully parametrized finite element simulation model of the stator bar end is created using the COMSOL Multiphysics.The model allows conducting the comparison of different corona protection structures’d...In this paper a fully parametrized finite element simulation model of the stator bar end is created using the COMSOL Multiphysics.The model allows conducting the comparison of different corona protection structures’design,various materials properties,and finally optimizing the corona protection system.Several samples of SiC based nonlinear conductivity materials for corona protection were fabricated in laboratory and then investigated.The conductivity dependencies on electric field(0.05 to 1 kV/mm)and temperature(20 to 155℃)were measured.By comparing the heat-resistant grades of the corona protection material and the insulating material,the maximum working temperature of the corona protection material corresponds to the heat-resistant grade F of the insulating material.As the temperature increases,the nonlinear characteristics of the corona protection material in the experiment decrease dramatically,reducing the heat-resistant grade of the corona protection material.The decrease in the nonlinear characteristics of the corona protection material at the maximum operating temperature causes the maximum electric field strength at the end of the HV rotating machines end corona protection(ECP)exceeding the corona discharge electric field strength,resulting in corona phenomenon.展开更多
Intense evaporation in areas with loess-like sulfate saline soils has resulted in significant ecological challenges that include water shortages and soil salinization.Investigating evaporation rate in loess-like sulfa...Intense evaporation in areas with loess-like sulfate saline soils has resulted in significant ecological challenges that include water shortages and soil salinization.Investigating evaporation rate in loess-like sulfate saline soils under varying salt contents carries crucial implications for understanding regional water loss processes,predicting soil salinization advancement,and formulating effective ecological management strategies.Therefore,this study sampled the loess-like sulfate saline soil that is widely distributed in western China as experimental materials and investigated the impact of different initial salt contents(0.00%,0.50%,1.50%,3.00%,and 5.00%)on the evaporation rate,water content,and temperature of soil.The results showed that the evaporation rate decreased with increasing initial salt content.After a salt accumulation layer formed on the soil surface,the water content of the surface soil fluctuated.An increase in the initial salt content resulted in a corresponding increase in the surface temperature.Considering the evaporation characteristics of loess-like sulfate saline soil and the impact of an anomalous increase in surface soil water content on soil surface resistance,this study proposed a modified evaporation model on the basis of Fujimaki's evaporation model of saline soil by introducing a correction coefficientβto modify the soil surface resistance.A comparison of the calculated evaporation rates before and after the modification with the measured evaporation rates revealed a significant improvement in the calculation accuracy of the modified model,indicating that the modified model is capable of more accurately simulating the evaporation rate of sulfate saline soil with different initial salt contents.This paper proposes an effective method for calculating the evaporation rate of loess-like sulfate saline soils,providing a theoretical basis for evaporation research in saline soil.展开更多
Scientifically constructing an ecological security pattern(ESP)is an important spatial analysis approach to improve ecological functions in arid areas and achieve sustainable development.However,previous research meth...Scientifically constructing an ecological security pattern(ESP)is an important spatial analysis approach to improve ecological functions in arid areas and achieve sustainable development.However,previous research methods ignored the complex trade-offs between ecosystem services in the process of constructing ESP.Taking the mainstream of the Tarim River Basin(MTRB),China as the study area,this study set seven risk scenarios by applying Ordered Weighted Averaging(OWA)model to trade-off the importance of the four ecosystem services adopted by this study(water conservation,carbon storage,habitat quality,and biodiversity conservation),thereby identifying priority protection areas for ecosystem services.And then,this study identified ecological sources by integrating ecosystem service importance with eco-environmental sensitivity.Using circuit theory,the ecological corridors and nodes were extracted to construct the ESP.The results revealed significant spatial heterogeneity in the four ecosystem services across the study area,primarily driven by hydrological gradients and human activity intensity.The ESP of the MTRB included 34 ecological sources with a total area of 1471.38 km^(2),66 ecological corridors with a length of about 1597.45 km,11 ecological pinch points,and 13 ecological barrier points distributed on the ecological corridors.The spatial differentiation of the ESP was obvious,with the upper and middle reaches of the MTRB having a large number of ecological sources and exhibiting higher clustering of ecological corridors compared with the lower reaches.The upper and middle reaches require ecological protection to sustain the existing ecosystem,while the lower reaches need to carry out ecological restoration measures including desertification control.Overall,this study makes up for the shortcomings of constructing ESP simply by spatial superposition of ecosystem service functions and can effectively improve the robustness and stability of ESP construction.展开更多
Urban expansion models are useful tools to understand urbanization process and have been given much attention. However, urban expansion is a complicated socio-economic phenomenon that is affected by complex and volati...Urban expansion models are useful tools to understand urbanization process and have been given much attention. However, urban expansion is a complicated socio-economic phenomenon that is affected by complex and volatile factors involving in great uncertainties. Therefore, the accurate simulation of the urban expansion process remains challenging. In this paper, we make an attempt to solve such uncertainty through a reversal process and view urban expansion as a process wherein the urban landscape overcomes resistance from other landscapes. We developed an innovative approach derived from the minimum cumulative resistance （MCR） model that involved the introduction of a relative resistance factor for dif- ferent source levels and the consideration of rigid constraints on urban expansion caused by ecological barriers. Using this approach, the urban expansion ecological resistance （UEER） model was created to describe ecological resistance surfaces suitable for simulating urban expansion and used to simulate urban expansion in Guangzhou. The study results demon- strate that the ecological resistance surface generated by the UEER model comprehensively reflects ecological resistance to urban expansion and indicates the spatial trends in urban expansion. The simulation results from the UEEIR-based model were more realistic and more accurately reflected ecological protection requirements than the conventional MCR-based model. These findings can enhance urban expansion simulation methods.展开更多
Objective:To explore whether or not the changes in body surface resistance at yuan-source points of three yin meridians of foot can specifically responds the onset of primary dysmenorrhea(PD) in females of menstrual p...Objective:To explore whether or not the changes in body surface resistance at yuan-source points of three yin meridians of foot can specifically responds the onset of primary dysmenorrhea(PD) in females of menstrual period and the before and after,so as to provide the evidence for acupoint selection in clinic.Methods:A total of 90 cases of PD were recruited in a PD group and 90 healthy female undergraduates were recruited in a normal group.The yuan-source of points of three yin meridians of foot were selected,i.e.Taibai(太白SP3),Taichong(太冲LR3) and Taixi(太溪KI3).The acupoints for control were Xuehai(血海SP10),the non-special acupoint,Xuanzhong(悬钟GB39),the acupoint not on the relevant meridian,as well as a non-meridian point.Successively,before menstruation,on Day 1 during menstruation and on Day 3 after menstruation,the body surface resistance at the above-mentioned test sites was detected in the participants of two groups each day.The resistance imbalance degree(RID) of the bilateral acupoints was taken as the outcome indicator.The observation lasted one menstrual cycle.Results:(1) Intra-group comparison:at LR3,the RID was lower on Day 1 during menstruation than that before menstruation significantly in the normal group(P ≤0.05).There was no significant change in RID at the same time points,but RID on Day 3 after menstruation was lower significantly than that before menstruation in the PD group(P ≤0.05).At SP3,KI3,SP10,GB39 and sham acupoint,there were no significant differences in RID among different time points within the same group(all P> 0.05).(2) Intergroup comparison:there were no significant differences in RID among different time points at the same point.(all P> 0.05).Conclusion:RID at yuan-source points of three yin meridians of foot cannot specifically respond to PD.However,at LR3,before and after menstruation,RID changes are different between PD patients and healthy female undergraduates,which needs a further study in the future.展开更多
Greenhousing is a technique to bridge season gap in vegetable production and has been widely used worldwide. Calculation of water requirement of crops grown in greenhouse and determination of their irrigation schedule...Greenhousing is a technique to bridge season gap in vegetable production and has been widely used worldwide. Calculation of water requirement of crops grown in greenhouse and determination of their irrigation schedules in arid and semi-arid regions are essential for greenhouse maintenance and have thus attracted increased attention over the past decades. The most common method used in the literature to estimate crop evapotranspiration（ET） is the Penman-Monteith（PM） formula. When applied to greenhouse, however, it often uses canopy resistance instead of surface resistance. It is understood that the surface resistance in greenhouse is the result of a combined effect of canopy restriction and soil-surface restriction to water vapor flow, and the relative dominance of one restriction over another depends on crop canopy. In this paper, we developed a surface resistance model in a way similar to two parallel resistances in an electrical circuit to account for both restrictions. Also, considering that wind speed in greenhouse is normally rather small, we compared three methods available in the literature to calculate the aerodynamic resistance, which are the r_a^1 method proposed by Perrier（1975a, b）, the r_a^2 method proposed by Thom and Oliver（1977）, and the r_a^3 method proposed by Zhang and Lemeu（1992）. We validated the model against ET of tomatoes in a greenhouse measured from sap flow system combined with micro-lysimeter in 2015 and with weighing lysimeter in 2016. The results showed that the proposed surface resistance model improved the accuracy of the PM model, especially when the leaf area index was low and the greenhouse was being irrigated. We also found that the aerodynamic resistance calculated from the r_a^1 and r_a^3 methods is applicable to the greenhouse although the latter is slightly more accurate than the former. The proposed surface resistance model, together with the r_a^3 method for aerodynamic resistance, offers an improved approach to estimate ET in greenhouse using the PM formula.展开更多
In this paper, the peeling behavior and the spalling resistance effect of carbon fiber reinforced polymer （CFRP） sheets externally bonded to bent concrete surfaces are firstly investigated experimentally. Twenty one...In this paper, the peeling behavior and the spalling resistance effect of carbon fiber reinforced polymer （CFRP） sheets externally bonded to bent concrete surfaces are firstly investigated experimentally. Twenty one curved specimens and seven plane specimens are studied in the paper, in which curved specimens with bonded CFRP sheets can simulate the concrete spalling in tunnel, culvert, arch bridge etc., whereas plane specimens with bonded CFRP sheets can simulate the concrete spalling in beam bridge, slab bridge and pedestrian bridge. Three kinds of curved specimens with different radii of curvature are chosen by referring to practical tunnel structures, and plane specimens are used for comparison with curved ones. A peeling load is applied on the FRP sheet by loading a circular steel tube placed into the central notch of beam to debond CFRP sheets from the bent concrete surface, meanwhile full-range load-deflection curves are recorded by a MTS 831.10 Elastomer Test System. Based on the experimental results, a theoretical analysis is also conducted for the specimens. Both theoretical and experimental results show that only two material parameters, the interfacial fracture energy of CFRP-concrete interface and the tensile stiffness of CFRP sheets, are needed for describing the interfacial spalling behavior. It is found that the radius of curvature has remarkable influence on peeling load-deflection curves. The test methods and test results given in the paper are helpful and available for reference to the designer of tunnel strengthening.展开更多
A number of researchers haw reported discrepancies between surface resistance （SR） measurements and classical theoretical predictions in normal metals for millimetre wavelengths （MW）. In this paper, a rigorous mod...A number of researchers haw reported discrepancies between surface resistance （SR） measurements and classical theoretical predictions in normal metals for millimetre wavelengths （MW）. In this paper, a rigorous model is developed for analysing SR of normal metals. This model is based on quantum mechanical analysis of the spatial dispersion within the metal. We use the model to predict SR and eliminate the discrepancies between SR measurements and classical theoretical predictions in normal metals for MW. Moreover, we have compared the results of this model with that of the classical skin-effect model and classical relaxation-effect model. Our analysis shows that the conductivity is not only frequency- but also wave-vector-dependent for MW. We demonstrate that our model has good quantitative agreement with the published experimental data for the room temperature surface resistance of normal metals for MW.展开更多
This paper, with veneer as a particularly detected target, deals with a new method for detecting veneer moisture content. Surface resistance is measured by the fixed pressure, circle-shaped point and surface-touched d...This paper, with veneer as a particularly detected target, deals with a new method for detecting veneer moisture content. Surface resistance is measured by the fixed pressure, circle-shaped point and surface-touched detector. With the help of the computer, the veneer moisture and its distribution will be detected in a faster way with no harm to the veneer surface.展开更多
Zr and its alloys have excellent mechanical properties as new structural material,but in specific application environment,its corrosion resistance still needs to be further explored.In this work,double glow plasma sur...Zr and its alloys have excellent mechanical properties as new structural material,but in specific application environment,its corrosion resistance still needs to be further explored.In this work,double glow plasma surface alloying technique was used for copperizing on pure Zr surface.Besides,X-ray diffraction（XRD）,scanning electron microscope（SEM） and energy dispersion spectrum（EDS） were employed to characterize the samples.Furthermore,research was also conducted on the polarization curve of the samples in different solutions.Copperizing on surface can improve corrosion resistance of pure Zr in 3.5 % Na Cl and 0.5 moláL-1Na OH solutions.Especially in 0.5 moláL-1Na OH solution,the corrosion resistance can achieve significant improvement.However,copperizing has no influence on the improvement of corrosion resistance of pure Zr in 0.5 moláL-1H2SO4 solution.The results may provide new insight into way for improving the corrosion property of zirconium alloys.展开更多
A new TEo1δ test probe with proper transmission factor is fabricated for the measurement of surface resistance of high temperature superconductor （HTS） thin film. Coupling holes instead of coupling loops are used i...A new TEo1δ test probe with proper transmission factor is fabricated for the measurement of surface resistance of high temperature superconductor （HTS） thin film. Coupling holes instead of coupling loops are used in the probe for its easier machining and relatively low loss. Two 6 mm × 3 mm × 8 mm dielectric waveguides, one side of them is coated by silver, are used for coupling. The measurement result of S21 agrees well with the simulation because the size of the probe can be rigidly controlled by machine. The microwave surface resistance of four YBCO/MgO films are measured at 77 K and 12 GHz and scaled to 10 GHz according to thef2 rule. The average surface resistance of four HTS thin fdms is 0.38 mΩ, the standard deviation and relative standard deviation of one single HTS thin film are 0.009 mΩ and 2.4%, respectively.展开更多
Electrical and electromagnetic shielding wood metal composite was prepared by using electroless nickel plating. The effects of solution amount, plating time and plating temperature on surface resistivity and electroma...Electrical and electromagnetic shielding wood metal composite was prepared by using electroless nickel plating. The effects of solution amount, plating time and plating temperature on surface resistivity and electromagnetic shielding effectiveness were investigated. And P content, microstructure and surface feature of layers obtained at different temperatures were analyzed by energy dispersion spectrometer （EDS）, X-ray diffraction （XRI）） and scanning electron microscopy （SEM）. The results showed that layers with higher electro-conductivity and electromagnetic shielding effectiveness were obtained under the optimum conditions that plating solution was 500 mL, plating time was 30 min and plating temperature was 62℃. The results showed by EDS analysis; that P content increased gradually in a small extent with plating temperature increased. It was showed by XRD and SEM analysis that layers plated at different temperatures were all microcrystalline structure and uniform and successive, which had noticeable metal luster. Those indicated that plating temperature had little influence on microstructure and surface feature under pH value invariable.展开更多
The understanding of electrical breakdown in atmospheric air across micrometer gaps is critically important for the insulation design of micro ＆ nano electronic devices. In this paper, planar aluminum electrodes with...The understanding of electrical breakdown in atmospheric air across micrometer gaps is critically important for the insulation design of micro ＆ nano electronic devices. In this paper, planar aluminum electrodes with gaps ranging from 2μm to 40 #m were fabricated by microelectromechanical system technology. The influence factors including gap width and surface dielectric states were experimentally investigated using the home-built test and measurement system. Results showed that for SiO2 layers the current sustained at 2-3 nA during most of the pre-breakdown period, and then rose rapidly to 10-30 nA just before breakdown due to field electron emission, followed by the breakdown. The breakdown voltage curves demonstrated three stages： （1） a constantly decreasing region （the gap width d 〈5 μm）, where the field emission effect played an important role just near breakdown, supplying enough initial electrons for the breakdown process; （2） a plateau region with a near constant breakdown potential （5 μm〈 d 〈10 μm）; （3） a region for large gaps that adhered to Paschen＇s curve （d 〉10μm）. And the surface dielectric states including the surface resistivity and secondary electron yield were verified to be related to the propagation of discharge due to the interaction between initial electrons and dielectrics.展开更多
Cubic boron nitride （c-BN） thin films are deposited on p-type Si wafers using radio frequency （RF） sputtering and then doped by implanting S ions. Wile implantation energy of the ions is 19 keV, and the implantati...Cubic boron nitride （c-BN） thin films are deposited on p-type Si wafers using radio frequency （RF） sputtering and then doped by implanting S ions. Wile implantation energy of the ions is 19 keV, and the implantation dose is between 1015 ions/cm2 and 1016 ions/cm2. The doped c-BN thin films are then annealed at a temperature between 400℃ and 800℃. The results show that the surface resistivity of doped and annealed c-BN thin films is lowered by two to three orders, and the activation energy of c-BN thin films is 0.18 eV.展开更多
Polypropylene（PP） composites that contain silver micro-particles（MILLION KILLER, denoted as Ag-Ms） and conductive carbon black（CB） have both antibacterial and antistatic properties. In the present study, the ant...Polypropylene（PP） composites that contain silver micro-particles（MILLION KILLER, denoted as Ag-Ms） and conductive carbon black（CB） have both antibacterial and antistatic properties. In the present study, the antibacterial and antistatic PP/Ag-Ms/CB composites were prepared by melt blending. The results showed that when the content was 0.8 wt%, Ag-Ms could be uniformly dispersed in the PP matrix and the mechanical properties of the composites remained stable. And the reduction percentages of Staphylococcus aureus and Escherichia coli were more than 80% which showed the good antibacterial behavior. In addition, conductive carbon black had reinforcing and toughening effects on the mechanical properties of PP/Ag-Ms/CB composites. When the content of CB was beyond 30 wt%, the surface resistance of the composite was reduced to less than 108 Ω which showed a remarkable antistatic property. According to the different filling content of conductive carbon black, it can flexibly regulate the resistivity of PP, and the conductive effect is durable and stable. We thus can produce permanent antistatic materials.展开更多
基金Project(2011CB605601)supported by the National Basic Research Program(973 Program)of ChinaProject(50902088)supported by the National Natural Science Foundation of China+1 种基金Project(ZR2011EMM002)supported by the Natural Science Foundation in Shandong Province,ChinaProject(2009AA035301)supported by the National High Technology Research and Development Program(863 Program)of China
文摘Abstract： PAN （Polyacrylonitrile）-based carbonaceous fibers were prepared at the heat treatment temperature （HTT） range of 650 to 900 ℃. The relationships among HTT, carbon content and volume resistivity of the carbonaceous fibers were investigated. The carbonaceous fibers/PTFE （Polytetrafluoroethylene） antistatic coatings were prepared by the spraying technology and the effects of carbonaceous fibers and pigments on surface resistivity of the coatings were systematically discussed. Micrographs provide insight into the antistatic mechanism of the coating. The results show that carbon content of the carbonaceous fibers increases from 68.8% to 74.8% （mass fraction） and the volume resistivity decreases drastically from 1.94× 10^-3 to 8.27× 10 ^-2.cm. The surface resistivity of the antistatic coating is adjustable between 10^5 and 10^8Ω2 to fit the different antistatic materials. Static is dissipated by a conductive network of short fibers and the tunneling effect between the neighboring fibers and conductive pigments. Conductive pigments make the conductive network more perfect and improve the antistatic ability, but insulating pigments acting as barriers for the formation of conductive channel increases the surface resistivity of the coatings. The influence of pigments on the surface resistivity drops gradually with the decrease of the carbonaceous fibers volume resistivity.
文摘The implanted ion range, the depth profile and the film sttucture of the implanted layer were studied; the carrier concentration and the mobility were measured; the conductivity mechanism of the film implanted Fe into Al_2O_3 ceramic was discussed. The conclusion is that the implanted Fe^(2+) ions move into Al_2O_3 lattice and replace Al^(3+) to form subs- titution impurities so that the ion implanted lat- tice, as compared with the original one, presents an effective negative charge which forms a negative charge center. A vacancy is bound arround it, and an acceptor is introduced in the forbidden band.
基金Project support by the National Key Research and Development Program of China(Grant No.2022YFA1603900)the National Natural Science Foundation of China–Beijing Joint Fund(Grant No.U23A6015)+1 种基金Central University Basic Research Fund of China(Grant No.E1E40207X2)the Funds from University of Chinese Academy of Sciences(Grant Nos.E1EG0210X2 and 118900M018).
文摘YBa_(2)Cu_(3)O_(7-x)(YBCO)films with low microwave surface resistance(RS)are essential for high temperature superconducting microwave devices.The oxygen pressure during deposition has been found to influence RS significantly.In this work,we deposited highly c-axis aligned YBCO films on single crystal MgO(001)substrates under different oxygen pressures via pulsed laser ablation.Their detailed microstructure was characterized with three-dimensional reciprocal space mapping(3D-RSM)method and their microwave surface resistance was also measured with resonant cavity perturbation method.We found that the variation of oxygen pressure can affect film microstructure,including grain orientation distribution and the concentration of crystal defects.The microstructure modulation can explain RS dependence on the oxygen pressure.
基金Funded by the National Natural Science Foundation of China(Nos.U1934206,52208299,and 52108260)the 2021 Tencent XPLORER PRIZE。
文摘In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variable based on the change of velocity of ultrasonic pulse(Du) and impact elastic wave(Di)were defined according to the classical damage theory.The influences of stress level,loading frequency and concrete strength on damage variable were measured.The experimental results show that Du and Di both present a three-stages trend for concrete exposed to fatigue loads.Since impact elastic wave is more sensitive to the microstructure damage in stage Ⅲ,the critical damage variable,i e,the damage variable before the final fracture of concrete of Di is slightly higher than that of Du.Meanwhile,the evolution of SR of concrete exposed to fatigue loads were analyzed and the relationship between SR and Du,SR and Di of concrete exposed to fatigue loads were established.It is found that the SR of concrete was decreased with the increasing fatigue cycles,indicating that surface electrical resistance method can also be applied to describe the damage of ballastless track concrete exposed to fatigue loads.
基金supported by the Science Fund for the Gansu Provincial Natural Science Foundation Project(22JR5RA339).
文摘Land use/cover change(LUCC)constitutes the spatial and temporal patterns of ecological security,and the construction of ecological networks is an effective way to ensure ecological security.Exploring the spatial and temporal change characteristics of ecological network and analyzing the integrated relationship between LUCC and ecological security are crucial for ensuring regional ecological security.Gansu is one of the provinces with fragile ecological environment in China,and rapid changes in land use patterns in recent decades have threatened ecological security.Therefore,taking Gansu Province as the study area,this study simulated its land use pattern in 2050 using patch-generating land use simulation(PLUS)model based on the LUCC trend from 2000 to 2020 and integrated the LUCC into morphological spatial pattern analysis(MSPA)to identify ecological sources and extract the ecological corridors to construct ecological network using circuit theory.The results revealed that,according to the prediction results in 2050,the areas of cultivated land,forest land,grassland,water body,construction land,and unused land would be 63,447.52,39,510.80,148,115.18,4605.21,8368.89,and 161,752.40 km^(2),respectively.The number of ecological sources in Gansu Province would increase to 80,with a total area of 99,927.18 km^(2).The number of ecological corridors would increase to 191,with an estimated total length of 6120.66 km.Both ecological sources and ecological corridors showed a sparse distribution in the northwest and dense distribution in the southeast of the province at the spatial scale.The number of ecological pinch points would reach 312 and the total area would expect to increase to 842.84 km^(2),with the most pronounced increase in the Longdong region.Compared with 2020,the number and area of ecological barriers in 2050 would decrease significantly by 63 and 370.71 km^(2),respectively.In general,based on the prediction results,the connectivity of ecological network of Gansu Province would increase in 2050.To achieve the predicted ecological network in 2050,emphasis should be placed on the protection of cultivated land and ecological land,the establishment of ecological sources in desert areas,the reinforcement of the protection for existing ecological sources,and the construction of ecological corridors to enhance the stability of ecological network.This study provides valuable theoretical support and references for the future construction of ecological networks and regional land resource management decision-making.
文摘In this paper a fully parametrized finite element simulation model of the stator bar end is created using the COMSOL Multiphysics.The model allows conducting the comparison of different corona protection structures’design,various materials properties,and finally optimizing the corona protection system.Several samples of SiC based nonlinear conductivity materials for corona protection were fabricated in laboratory and then investigated.The conductivity dependencies on electric field(0.05 to 1 kV/mm)and temperature(20 to 155℃)were measured.By comparing the heat-resistant grades of the corona protection material and the insulating material,the maximum working temperature of the corona protection material corresponds to the heat-resistant grade F of the insulating material.As the temperature increases,the nonlinear characteristics of the corona protection material in the experiment decrease dramatically,reducing the heat-resistant grade of the corona protection material.The decrease in the nonlinear characteristics of the corona protection material at the maximum operating temperature causes the maximum electric field strength at the end of the HV rotating machines end corona protection(ECP)exceeding the corona discharge electric field strength,resulting in corona phenomenon.
基金supported by the National Natural Science Foundation of China(51769013,52168052)。
文摘Intense evaporation in areas with loess-like sulfate saline soils has resulted in significant ecological challenges that include water shortages and soil salinization.Investigating evaporation rate in loess-like sulfate saline soils under varying salt contents carries crucial implications for understanding regional water loss processes,predicting soil salinization advancement,and formulating effective ecological management strategies.Therefore,this study sampled the loess-like sulfate saline soil that is widely distributed in western China as experimental materials and investigated the impact of different initial salt contents(0.00%,0.50%,1.50%,3.00%,and 5.00%)on the evaporation rate,water content,and temperature of soil.The results showed that the evaporation rate decreased with increasing initial salt content.After a salt accumulation layer formed on the soil surface,the water content of the surface soil fluctuated.An increase in the initial salt content resulted in a corresponding increase in the surface temperature.Considering the evaporation characteristics of loess-like sulfate saline soil and the impact of an anomalous increase in surface soil water content on soil surface resistance,this study proposed a modified evaporation model on the basis of Fujimaki's evaporation model of saline soil by introducing a correction coefficientβto modify the soil surface resistance.A comparison of the calculated evaporation rates before and after the modification with the measured evaporation rates revealed a significant improvement in the calculation accuracy of the modified model,indicating that the modified model is capable of more accurately simulating the evaporation rate of sulfate saline soil with different initial salt contents.This paper proposes an effective method for calculating the evaporation rate of loess-like sulfate saline soils,providing a theoretical basis for evaporation research in saline soil.
基金funded by the Xinjiang Uygur Autonomous Region Tianshan Talent Training Program(2023TSYCLJ0047)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(2023D01D18)+1 种基金the Key Research and Development Project of Xinjiang(2022B03024-1)the Science and Technology Planning Project of Xinjiang Production and Construction Corps(2022DB023)。
文摘Scientifically constructing an ecological security pattern(ESP)is an important spatial analysis approach to improve ecological functions in arid areas and achieve sustainable development.However,previous research methods ignored the complex trade-offs between ecosystem services in the process of constructing ESP.Taking the mainstream of the Tarim River Basin(MTRB),China as the study area,this study set seven risk scenarios by applying Ordered Weighted Averaging(OWA)model to trade-off the importance of the four ecosystem services adopted by this study(water conservation,carbon storage,habitat quality,and biodiversity conservation),thereby identifying priority protection areas for ecosystem services.And then,this study identified ecological sources by integrating ecosystem service importance with eco-environmental sensitivity.Using circuit theory,the ecological corridors and nodes were extracted to construct the ESP.The results revealed significant spatial heterogeneity in the four ecosystem services across the study area,primarily driven by hydrological gradients and human activity intensity.The ESP of the MTRB included 34 ecological sources with a total area of 1471.38 km^(2),66 ecological corridors with a length of about 1597.45 km,11 ecological pinch points,and 13 ecological barrier points distributed on the ecological corridors.The spatial differentiation of the ESP was obvious,with the upper and middle reaches of the MTRB having a large number of ecological sources and exhibiting higher clustering of ecological corridors compared with the lower reaches.The upper and middle reaches require ecological protection to sustain the existing ecosystem,while the lower reaches need to carry out ecological restoration measures including desertification control.Overall,this study makes up for the shortcomings of constructing ESP simply by spatial superposition of ecosystem service functions and can effectively improve the robustness and stability of ESP construction.
基金National Natural Science Foundation of China, No.41001385 12th Five-year National Science Supported Planning Project, No.2012BAJ 15B02
文摘Urban expansion models are useful tools to understand urbanization process and have been given much attention. However, urban expansion is a complicated socio-economic phenomenon that is affected by complex and volatile factors involving in great uncertainties. Therefore, the accurate simulation of the urban expansion process remains challenging. In this paper, we make an attempt to solve such uncertainty through a reversal process and view urban expansion as a process wherein the urban landscape overcomes resistance from other landscapes. We developed an innovative approach derived from the minimum cumulative resistance （MCR） model that involved the introduction of a relative resistance factor for dif- ferent source levels and the consideration of rigid constraints on urban expansion caused by ecological barriers. Using this approach, the urban expansion ecological resistance （UEER） model was created to describe ecological resistance surfaces suitable for simulating urban expansion and used to simulate urban expansion in Guangzhou. The study results demon- strate that the ecological resistance surface generated by the UEER model comprehensively reflects ecological resistance to urban expansion and indicates the spatial trends in urban expansion. The simulation results from the UEEIR-based model were more realistic and more accurately reflected ecological protection requirements than the conventional MCR-based model. These findings can enhance urban expansion simulation methods.
基金Supported by National Natural Science Foundation of China:81573884,81973755,81603542Excellent Innovation Team Construction Project of Hebei University of Chinese Medicine:JTZ2020008。
文摘Objective:To explore whether or not the changes in body surface resistance at yuan-source points of three yin meridians of foot can specifically responds the onset of primary dysmenorrhea(PD) in females of menstrual period and the before and after,so as to provide the evidence for acupoint selection in clinic.Methods:A total of 90 cases of PD were recruited in a PD group and 90 healthy female undergraduates were recruited in a normal group.The yuan-source of points of three yin meridians of foot were selected,i.e.Taibai(太白SP3),Taichong(太冲LR3) and Taixi(太溪KI3).The acupoints for control were Xuehai(血海SP10),the non-special acupoint,Xuanzhong(悬钟GB39),the acupoint not on the relevant meridian,as well as a non-meridian point.Successively,before menstruation,on Day 1 during menstruation and on Day 3 after menstruation,the body surface resistance at the above-mentioned test sites was detected in the participants of two groups each day.The resistance imbalance degree(RID) of the bilateral acupoints was taken as the outcome indicator.The observation lasted one menstrual cycle.Results:(1) Intra-group comparison:at LR3,the RID was lower on Day 1 during menstruation than that before menstruation significantly in the normal group(P ≤0.05).There was no significant change in RID at the same time points,but RID on Day 3 after menstruation was lower significantly than that before menstruation in the PD group(P ≤0.05).At SP3,KI3,SP10,GB39 and sham acupoint,there were no significant differences in RID among different time points within the same group(all P> 0.05).(2) Intergroup comparison:there were no significant differences in RID among different time points at the same point.(all P> 0.05).Conclusion:RID at yuan-source points of three yin meridians of foot cannot specifically respond to PD.However,at LR3,before and after menstruation,RID changes are different between PD patients and healthy female undergraduates,which needs a further study in the future.
基金funded by the Science and Technology Innovation Project of Chinese Academy of Agricultural Sciences(FIRI2016-07)
文摘Greenhousing is a technique to bridge season gap in vegetable production and has been widely used worldwide. Calculation of water requirement of crops grown in greenhouse and determination of their irrigation schedules in arid and semi-arid regions are essential for greenhouse maintenance and have thus attracted increased attention over the past decades. The most common method used in the literature to estimate crop evapotranspiration（ET） is the Penman-Monteith（PM） formula. When applied to greenhouse, however, it often uses canopy resistance instead of surface resistance. It is understood that the surface resistance in greenhouse is the result of a combined effect of canopy restriction and soil-surface restriction to water vapor flow, and the relative dominance of one restriction over another depends on crop canopy. In this paper, we developed a surface resistance model in a way similar to two parallel resistances in an electrical circuit to account for both restrictions. Also, considering that wind speed in greenhouse is normally rather small, we compared three methods available in the literature to calculate the aerodynamic resistance, which are the r_a^1 method proposed by Perrier（1975a, b）, the r_a^2 method proposed by Thom and Oliver（1977）, and the r_a^3 method proposed by Zhang and Lemeu（1992）. We validated the model against ET of tomatoes in a greenhouse measured from sap flow system combined with micro-lysimeter in 2015 and with weighing lysimeter in 2016. The results showed that the proposed surface resistance model improved the accuracy of the PM model, especially when the leaf area index was low and the greenhouse was being irrigated. We also found that the aerodynamic resistance calculated from the r_a^1 and r_a^3 methods is applicable to the greenhouse although the latter is slightly more accurate than the former. The proposed surface resistance model, together with the r_a^3 method for aerodynamic resistance, offers an improved approach to estimate ET in greenhouse using the PM formula.
基金supported by the Scheme of Science and Technology of Guangdong Province,China(2005B32801002)
文摘In this paper, the peeling behavior and the spalling resistance effect of carbon fiber reinforced polymer （CFRP） sheets externally bonded to bent concrete surfaces are firstly investigated experimentally. Twenty one curved specimens and seven plane specimens are studied in the paper, in which curved specimens with bonded CFRP sheets can simulate the concrete spalling in tunnel, culvert, arch bridge etc., whereas plane specimens with bonded CFRP sheets can simulate the concrete spalling in beam bridge, slab bridge and pedestrian bridge. Three kinds of curved specimens with different radii of curvature are chosen by referring to practical tunnel structures, and plane specimens are used for comparison with curved ones. A peeling load is applied on the FRP sheet by loading a circular steel tube placed into the central notch of beam to debond CFRP sheets from the bent concrete surface, meanwhile full-range load-deflection curves are recorded by a MTS 831.10 Elastomer Test System. Based on the experimental results, a theoretical analysis is also conducted for the specimens. Both theoretical and experimental results show that only two material parameters, the interfacial fracture energy of CFRP-concrete interface and the tensile stiffness of CFRP sheets, are needed for describing the interfacial spalling behavior. It is found that the radius of curvature has remarkable influence on peeling load-deflection curves. The test methods and test results given in the paper are helpful and available for reference to the designer of tunnel strengthening.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 90201011 and 10174057）, the Key Project of Chinese Ministry of Education （Grant No 2005-105148） and The 0verseas Scholarship Program of UESTC （University of Electronic Science and Technology of China）.The work was performed at the Imperial College, London. It is a great pleasure to acknowledge the helpful discussions with Dr S. Lucyszyn during the course of this work.
文摘A number of researchers haw reported discrepancies between surface resistance （SR） measurements and classical theoretical predictions in normal metals for millimetre wavelengths （MW）. In this paper, a rigorous model is developed for analysing SR of normal metals. This model is based on quantum mechanical analysis of the spatial dispersion within the metal. We use the model to predict SR and eliminate the discrepancies between SR measurements and classical theoretical predictions in normal metals for MW. Moreover, we have compared the results of this model with that of the classical skin-effect model and classical relaxation-effect model. Our analysis shows that the conductivity is not only frequency- but also wave-vector-dependent for MW. We demonstrate that our model has good quantitative agreement with the published experimental data for the room temperature surface resistance of normal metals for MW.
文摘This paper, with veneer as a particularly detected target, deals with a new method for detecting veneer moisture content. Surface resistance is measured by the fixed pressure, circle-shaped point and surface-touched detector. With the help of the computer, the veneer moisture and its distribution will be detected in a faster way with no harm to the veneer surface.
基金financially supported by the National Basic Research Program of China (No.2013CB733000)the National Natural Science Foundation of China (Nos.51271161,51271162 and 51434008)
文摘Zr and its alloys have excellent mechanical properties as new structural material,but in specific application environment,its corrosion resistance still needs to be further explored.In this work,double glow plasma surface alloying technique was used for copperizing on pure Zr surface.Besides,X-ray diffraction（XRD）,scanning electron microscope（SEM） and energy dispersion spectrum（EDS） were employed to characterize the samples.Furthermore,research was also conducted on the polarization curve of the samples in different solutions.Copperizing on surface can improve corrosion resistance of pure Zr in 3.5 % Na Cl and 0.5 moláL-1Na OH solutions.Especially in 0.5 moláL-1Na OH solution,the corrosion resistance can achieve significant improvement.However,copperizing has no influence on the improvement of corrosion resistance of pure Zr in 0.5 moláL-1H2SO4 solution.The results may provide new insight into way for improving the corrosion property of zirconium alloys.
基金This work was supported by the National 863 Foundation of China under Grant No. TC265-C304.
文摘A new TEo1δ test probe with proper transmission factor is fabricated for the measurement of surface resistance of high temperature superconductor （HTS） thin film. Coupling holes instead of coupling loops are used in the probe for its easier machining and relatively low loss. Two 6 mm × 3 mm × 8 mm dielectric waveguides, one side of them is coated by silver, are used for coupling. The measurement result of S21 agrees well with the simulation because the size of the probe can be rigidly controlled by machine. The microwave surface resistance of four YBCO/MgO films are measured at 77 K and 12 GHz and scaled to 10 GHz according to thef2 rule. The average surface resistance of four HTS thin fdms is 0.38 mΩ, the standard deviation and relative standard deviation of one single HTS thin film are 0.009 mΩ and 2.4%, respectively.
基金The research was supported by the National Natural Science Foundation of China （30571454）. Natural Science Foundation of Heilongjiang Province （C0210） and Harbin City Youth Science Faud （2004AFQXJ027）.
文摘Electrical and electromagnetic shielding wood metal composite was prepared by using electroless nickel plating. The effects of solution amount, plating time and plating temperature on surface resistivity and electromagnetic shielding effectiveness were investigated. And P content, microstructure and surface feature of layers obtained at different temperatures were analyzed by energy dispersion spectrometer （EDS）, X-ray diffraction （XRI）） and scanning electron microscopy （SEM）. The results showed that layers with higher electro-conductivity and electromagnetic shielding effectiveness were obtained under the optimum conditions that plating solution was 500 mL, plating time was 30 min and plating temperature was 62℃. The results showed by EDS analysis; that P content increased gradually in a small extent with plating temperature increased. It was showed by XRD and SEM analysis that layers plated at different temperatures were all microcrystalline structure and uniform and successive, which had noticeable metal luster. Those indicated that plating temperature had little influence on microstructure and surface feature under pH value invariable.
基金supported by Research Funds of State Key Laboratory of Electrical Insulation and Power Equipment (Xi'an Jiaotong University) of China (No.EIPE14107)
文摘The understanding of electrical breakdown in atmospheric air across micrometer gaps is critically important for the insulation design of micro ＆ nano electronic devices. In this paper, planar aluminum electrodes with gaps ranging from 2μm to 40 #m were fabricated by microelectromechanical system technology. The influence factors including gap width and surface dielectric states were experimentally investigated using the home-built test and measurement system. Results showed that for SiO2 layers the current sustained at 2-3 nA during most of the pre-breakdown period, and then rose rapidly to 10-30 nA just before breakdown due to field electron emission, followed by the breakdown. The breakdown voltage curves demonstrated three stages： （1） a constantly decreasing region （the gap width d 〈5 μm）, where the field emission effect played an important role just near breakdown, supplying enough initial electrons for the breakdown process; （2） a plateau region with a near constant breakdown potential （5 μm〈 d 〈10 μm）; （3） a region for large gaps that adhered to Paschen＇s curve （d 〉10μm）. And the surface dielectric states including the surface resistivity and secondary electron yield were verified to be related to the propagation of discharge due to the interaction between initial electrons and dielectrics.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60876006 and 60376007)the Natural Science Foundation of Beijing, China (Grant No. 4072007)+2 种基金the Scientific Research Program of Beijing Municipal Commission of Education, China (Grant No.KM200910005018)the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry, Chinathe Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality
文摘Cubic boron nitride （c-BN） thin films are deposited on p-type Si wafers using radio frequency （RF） sputtering and then doped by implanting S ions. Wile implantation energy of the ions is 19 keV, and the implantation dose is between 1015 ions/cm2 and 1016 ions/cm2. The doped c-BN thin films are then annealed at a temperature between 400℃ and 800℃. The results show that the surface resistivity of doped and annealed c-BN thin films is lowered by two to three orders, and the activation energy of c-BN thin films is 0.18 eV.
基金Funded by National Natural Science Funds of China(No.51173141)Natural Science Funds of Hubei Province,China(No.2014CFC1152)+1 种基金Science and Technology Research Program of Department of Education of Hubei Province,China(No.Q20122305)Funds of Hubei Key Laboratory of Automotive Power Train and Electronic Control(No.ZDK1201405)
文摘Polypropylene（PP） composites that contain silver micro-particles（MILLION KILLER, denoted as Ag-Ms） and conductive carbon black（CB） have both antibacterial and antistatic properties. In the present study, the antibacterial and antistatic PP/Ag-Ms/CB composites were prepared by melt blending. The results showed that when the content was 0.8 wt%, Ag-Ms could be uniformly dispersed in the PP matrix and the mechanical properties of the composites remained stable. And the reduction percentages of Staphylococcus aureus and Escherichia coli were more than 80% which showed the good antibacterial behavior. In addition, conductive carbon black had reinforcing and toughening effects on the mechanical properties of PP/Ag-Ms/CB composites. When the content of CB was beyond 30 wt%, the surface resistance of the composite was reduced to less than 108 Ω which showed a remarkable antistatic property. According to the different filling content of conductive carbon black, it can flexibly regulate the resistivity of PP, and the conductive effect is durable and stable. We thus can produce permanent antistatic materials.
