Study of the surface morphology of gas hydrate is of great importance in understanding its physical properties and occurrence.In order to investigate the surface morphology of different types(sI and sII)and occurrence...Study of the surface morphology of gas hydrate is of great importance in understanding its physical properties and occurrence.In order to investigate the surface morphology of different types(sI and sII)and occurrences(pore-filling and fracture-filling)of gas hydrate,both lab-synthesized and drilled-gas hydrate samples were measured using cryo-scanning electron microscopy(cryo-SEM).Results showed that the surface of s I hydrate was relatively smooth,and spongy nano-pores(200–400 nm)gradually occurred at the surface during continuous observation.The surface of sII hydrate was more compact,showing a tier-like structure.Hydrate occurred in quartz sand and usually filled the pores of the sediments and both hydrate and sediments were cemented with each other.SEM observation of the gas hydrates collected from the South China Sea showed that the surface morphology and contact relation with sediments varied with hydrate occurrence.For instance,hydrates dispersed in sediments mainly filled the pores of the sediments.The existence of microorganism shells,such as foraminifera,was beneficial to the formation of gas hydrate.When hydrate occurred as a massive or vein structure,it was easily distinguished from the surrounding sediments.The surface of hydrate with massive or vein structure showed two distinct characters:one was dense and smooth,the other is porous(several to tens of micrometers in diameter).The occurrence of different hydrate morphologies was probably caused by the supplement rates of methane gas.展开更多
Surface morphology of soil cracks is one of the important factors influencing the water evaporation rate in cracked soil in Yuanmou Dry-hot Valley Region,Southwest China. Quantitative study of the complicated surface ...Surface morphology of soil cracks is one of the important factors influencing the water evaporation rate in cracked soil in Yuanmou Dry-hot Valley Region,Southwest China. Quantitative study of the complicated surface morphology of soil cracks is a prerequisite for further studies of soil-cracking mechanisms. The present paper establishes a quantitative indicator system by application of concepts and methods originating from Fractal Geometry and Network Analysis. These indicators can effectively express the complicated features of soil-crack network structure. Furthermore,a series of values related to soil-crack morphology was obtained by image processing on field photos of soil-crack quads,and gradation criteria for the degree of development of soil cracks were determined. Finally,the changes in values of the morphological indicators under different degrees of development were analyzed in detail. Our results indicate that (1) the degree of development of soil cracks can be divided into five grades,i.e.,feeble development,slight development,medium development,intensive development and extremely intensive development; (2) the values of the indicators change predictably with increasing degree of development of soil cracks. The area density (Dc) increases,and both the area-weighted mean ratio of crack area to perimeter (AWMARP),which reflects the intensity of cracking,and the index r,which is related to the connectivity of a soil crack,grow uniformly (albeit with different forms). AWMRAP increases at a geometric rate while r shows logarithm-mic growth,indicating a gradual increase in theconnectivity of a soil crack. Nevertheless,the area-weighted mean of soil-crack fractal dimension (AWMFRAC) shows a decreasing trend,indicating a gradual decline in the complexity of cracks as area density increases.展开更多
In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock j...In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock joint surface were precisely calculated by means of a three-dimensional laser scanning machine.All test results were analyzed to investigate the shear behavior and normal displacement behavior of rock joints under CNL conditions.Degradation of rock joint surface during cyclic shear tests was also analyzed.The comparison results of the height parameters and the hybrid parameters of the joint surface during cyclic tests show that the degradation of the surface mostly happens in the first shear and the constant normal loads imposed on the joints have significant promotion effects on the morphology degradation.During cyclic shear tests,joints surfaces evolve from rough state to smooth state but keep an overall undulation.Dilatancy of rock joints degrades with the degradation of joint surface and the increase of normal loads.The closure deformation of joint is larger than that of the intact rock,and the normal stiffness increases with the increase of shearing times.展开更多
Quantification of complicated surface morphology of soil crack is a prerequisite and key to soil crack study. This paper takes soil crack quads in Yuanmou arid-hot valley region as examples, selecting several morpholo...Quantification of complicated surface morphology of soil crack is a prerequisite and key to soil crack study. This paper takes soil crack quads in Yuanmou arid-hot valley region as examples, selecting several morphological indicators, and analyzes the soil crack＇s morphological features under various development degrees. By statistic analysis, three quantitative indicators for surface morphology are selected, namely soil crack area density, area weighted mean fractal dimension and connectivity index R, which can not only express the development intensity of soil cracks, but also effectively describe its morphological complexity and connectivity. The research results set a good base for the establishment of soil crack assessment system in Yuanmou arid-hot valley region.展开更多
In order to further understand the effect of solid impurities on pipeline wall during erosion,the particle impact process without fluid was extracted for specific study.The effect of multi-impact particles on the wall...In order to further understand the effect of solid impurities on pipeline wall during erosion,the particle impact process without fluid was extracted for specific study.The effect of multi-impact particles on the wall of pipeline was studied experimentally and simulated.In this experiment,an improved ejection apparatus was implemented to carry out multi-impacts non-overlapping impingement by rhombic particles made of high speed steel(W18Cr4V)on the AA6061 aluminum alloy plate through changing particle angle,incident angle,orientation angle and impact velocity.As a result,each particle's penetration depth was investigated and particles' rebound trajectory can be described through this experiment as well as surface morphology of the target material after impingement.The ductile damage criterion,shear damage criterion and MSFLD damage criterion were jointly implemented in ABAQUS/CAE software to simulate the whole process of collision which proved to be effective by getting consistent result compared with experimental data.It is found that under the condition of continuous non-overlapping impact,the target material produces a small work hardening effect in the impact area by converting kinetic energy of moving particles into internal energy of plate so as to reduce the penetration depth of each impact particle.展开更多
This paper aims to characterise surface morphology and 3D roughness parameters of unidirectional carbon fibre reinforced plastic(UD-CFRP)milled at 0°,45°,90°,and 135°fibre orientation angles(FOAs)....This paper aims to characterise surface morphology and 3D roughness parameters of unidirectional carbon fibre reinforced plastic(UD-CFRP)milled at 0°,45°,90°,and 135°fibre orientation angles(FOAs).Side milling experiments are conducted on UD-CFRP laminates.Surface damage forms and texture direction of milled surface are analysed.Spatial frequency of defects on CFRP surface is quantitatively determined using radially averaged 2D PSD.The kinematicdynamic surface topography is reconstructed considering feed,runout and vibration,then the ideal roughness parameters,S_(a),S_(q),S_(sk),and S_(ku)are calculated and compared with the measured ones,finally the material factor-induced roughness components are quantified.Results show that CFRP surface has no regular feed marks.The frequency of fibre breakage or surface defects is greater than tooth passing frequency.FOAs sorted by their average S_(a)in descending order is135°>90°>45°>0°,where surface defects contribute 93.9%,77.1%,73.2%,72.2%of the total roughness respectively,which suggests that surface defects show a more important role than tool kinematics and vibration in formation of milled surface.The negative Skewness(Ssk<0)and high Kurtosis(S_(ku)=4.0–11.5)of milled surface signify porosity and the presence of many anomalous deep valleys in milled surface,respectively.展开更多
The effect of dust particles on electric contacts and a hazardous size range of hard dust particles using a rigid model were discussed before. As further research, elastic-plastic model of finite element analysis was ...The effect of dust particles on electric contacts and a hazardous size range of hard dust particles using a rigid model were discussed before. As further research, elastic-plastic model of finite element analysis was established in this work, which is closer to real condition. In this work, the behavior of large size and small size particles, and the influence of particles hardness were investigated. The calculating result of small-size particles presents a general hazardous size coefficient for different contact surface morphology; for large-size particles, it presents a hazardous size coefficient for complicated composition of the dust. And the effect of the dust shape is also discussed.展开更多
This study was conducted to investigate the influence of pulse parameters on the surface morphology and crystal orientation of the tungsten coatings electrodeposited on pure copper substrates. The deposited coatings w...This study was conducted to investigate the influence of pulse parameters on the surface morphology and crystal orientation of the tungsten coatings electrodeposited on pure copper substrates. The deposited coatings were analyzed by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and energy-dispersive spectrometer （EDS）. SEM analysis indicates that pulse parameters have significant influences on the surface morphology of the deposited coatings. Meanwhile, the change in grain size of the tungsten coatings demonstrates that the change in frequency and duty cycle could cause the variation of nucleation rate and grain growth of deposits. Moreover, no obvious diffusion layer at the coating/substrate interface is found by line analysis of EDS. XRD results reveal that tungsten coatings are of bcc structure and the preferred orientation of the deposits varies with duty cycle and period.展开更多
Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface s...Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface structures, surface morphology and residual mechanical properties were characterized. The crystallite size （La） of carbon fibers would be interrupted due to excessive electrochemical etching, while the crystallite spacing （d（002）） increased as increasing current density. The disordered structures on the surface of carbon fiber with rough surface increased at the initial oxidation stage and then removed by further electrochemical etching, which resulting in continuous increase of the extent of graphitization on the fiber surface. However, the electrochemical etching was beneficial to getting ordered morphology on the surface for carbon fiber with smooth surface, especially when the current density was lower than 1.77 A/m 2 . The tensile strength and tensile modulus could be improved by 17.27% and 5.75%, respectively, and was dependent of surface morphology. The decreasing density of carbon fibers probably resulted from the volume expansion of carbon fibers caused by the abundant oxygen functional groups intercalated between the adjacent graphite layers.展开更多
Rotation angle of the laser scan direction between two adjacent layers is a key controlling parameter during the high-power (≥ 1 kW) laser powder bed fusion (HP-LPBF) process. This study investigates the influen...Rotation angle of the laser scan direction between two adjacent layers is a key controlling parameter during the high-power (≥ 1 kW) laser powder bed fusion (HP-LPBF) process. This study investigates the influences of rotation angles (θ = 0°, 45°, 90°, 105°) on the surface morphology, microstructure, and mechanical properties of Inconel 718 (IN718) alloy produced by HP-LPBF. Results show that adopting low rotation angles (e.g., 0° and 45°) is prone to relatively poor surface finish and lack-of-fusion defects, whereas adopting high rotation angles (e.g., 90° and 105°) induces smaller surface roughness and better relative density. Each case reveals a noticeable edge effect but the maximal heights witness a downward trend with the increase of rotation angle. There are some minor differences in the primary dendrite arm spacing and grain morphology by varying the rotation angles. Moreover, the tensile property is slightly enhanced as the rotation angle increases. The present work suggests that high rotation angles like 90° and 105° would probably be more favorable for the 1 kW HP-LPBF process than rotation angles with relatively low values.展开更多
Learning hydrophobic phenomena from nature is always a promising approach to design the superhydrophobic surface.Purple orchid leaf which processes superhydrophobicity is an ideal plant model,and through mimicking its...Learning hydrophobic phenomena from nature is always a promising approach to design the superhydrophobic surface.Purple orchid leaf which processes superhydrophobicity is an ideal plant model,and through mimicking its structure,the surface with excellent hydrophobicity is able to be obtained.However,the unclear of the diversity in wettability during the different vegetation stages and the absence of its relation to the surface morphology limits the further enhancement of the inspired structure.Here,we analyze the wettability difference as the leaf grows from tender to mature and then to senescent.Combining with the variation of surface morphology and chemical composition,the well-developed micro-scale basic unit bumps with dense nano-scale waxy layer on the surface are proven to be responsible for the best hydrophobicity of the mature leaf.The presence of the undeveloped or damaged micro-nano hierarchical structure reduces the formation of air pockets at the interface,leading to the decrease of the wettability for leaves at other stages.Moreover,by fabricating artificial leaves,the nano-waxy layer is proved to be more effective than that of the micro-bumps on the surface wettability.The results of study are of a great significance for guiding the design and fabrication of plant-inspired bionic superhydrophobic surface.展开更多
The diffusion behaviours of vanadium implanted p- and n-type 4H-SiC are investigated by using the secondary ion mass spectrometry （SIMS）. Significant redistribution, especially out-diffusion of vanadium towards the ...The diffusion behaviours of vanadium implanted p- and n-type 4H-SiC are investigated by using the secondary ion mass spectrometry （SIMS）. Significant redistribution, especially out-diffusion of vanadium towards the sample surface is not observed after 1650 ℃annealing for both p- and n-type samples. Atomic force microscopy （AFM） is applied to the characterization of surface morphology, indicating the formation of continuous long furrows running in one direction across the wafer surface after 1650 ℃ annealing. The surface roughness results from the evaporation and re-deposition of Si species on the surface during annealing. The chemical compositions of sample surface axe investigated using x-ray photoelectron spectroscopy （XPS）. The results of C ls and Si 2p core-level spectra axe presented in detail to demonstrate the evaporation of Si from the wafer and the deposition of SiO2 on the sample surface during annealing.展开更多
We investigate the influence of A1 preflow time on surface morphology and quality of AIN and GaN. The AIN and GaN layers are grown on a Si （111） substrate by metal organic chemical vapor deposition. Scanning electro...We investigate the influence of A1 preflow time on surface morphology and quality of AIN and GaN. The AIN and GaN layers are grown on a Si （111） substrate by metal organic chemical vapor deposition. Scanning electron microscopy, atomic force microscopy, x-ray diffraction and optical microscopy are used for analysis. Consequently, we find significant differences in the epitaxial properties of AlN buffer and the GaN layer, which are dependent on the AI preflow time. A1 preflow layers act as nucleation sites in the case of AiN growth. Compact and uniform AIN nucleation sites are observed with optimizing A1 preflow at an early nucleation stage, which will lead to a smooth AIN surface. Trenches and AlN grain clusters appear on the AIN surface while meltoback etching occurs on the GaN surface with excessive A1 preflow. The GaN quality variation keeps a similar trend with the AIN quality, which is influenced by AI preflow. With an optimized duration orAl preflow, crystal quality and surface morphology of AIN and GaN could be improved.展开更多
The three-dimensional physical model of the randomly packed powder material irradiated by the laser beam was established,taking into account the transformation of the material phase,the melt spreading and the interact...The three-dimensional physical model of the randomly packed powder material irradiated by the laser beam was established,taking into account the transformation of the material phase,the melt spreading and the interaction of the free surface of the molten pool and the recoiling pressure caused by the material evaporation during the selective laser melting.Influence of the processing parameters on the thermal behavior,the material evaporation,the surface morphology and the densification behavior in the connection region of the molten pool and the substrate was studied.It was shown that the powder material underwent the transformation from the partial melting state to the complete melting state and finally to the overheating state with the applied laser energy density increasing from 167 J/mm^(3) to 417 J/mm^(3).Therefore,the solidified track ranged from the discontinuous tracks with the rough surface to the continuous tracks with residual porosities,then to the continuous and dense tracks and terminally to the fluctuated tracks with the increase in the laser energy density.Meanwhile,the laser energy effect depth was maintained the positive relationship with the laser energy density.The vortex velocity obtained in the free surface of the molten pool towards to the rear region in the opposite laser scan direction promoted the melt convection to the edge region of the molten pool as the laser energy density was higher than 277 J/mm^(3),demonstrating the efficient energy dissipation from the center of the irradiation region to the whole part of the molten pool and the attendant production of the sufficient melt volume.Therefore,the efficient spreading of the molten pool and the metallurgical bonding ability of the melt with the substrate was obtained at the optimized laser energy density of 277 J/mm^(3).However,the severe material evaporation would take place as the melt was overheated,resulting in the formation of the residual pores and poor surface quality.展开更多
By means of breaking tests on PtIr contact materials via a JF04C contact material testing machine, it was attempted to elucidate the characteristics of the various surface morphology and material transfer after the ar...By means of breaking tests on PtIr contact materials via a JF04C contact material testing machine, it was attempted to elucidate the characteristics of the various surface morphology and material transfer after the arc erosion process caused by break arc. The material transfer characteristics appeared in the experiments were concluded and analyzed. Meanwhile, the morphology of the anode and cathode surface were observed and analyzed by SEM.展开更多
Premature failure of coated tool often results from a poor adhesion of coating-substrate and shortens the lifetime of the tool. The results of increasing the adhesion strength of thin film coatings on cutting tool ins...Premature failure of coated tool often results from a poor adhesion of coating-substrate and shortens the lifetime of the tool. The results of increasing the adhesion strength of thin film coatings on cutting tool inserts by pretreating the inserts with sandblasting technique to obtain a desirable surface morphology of the inserts are presented. A geometric model representing the ideal surface morphology is established to enhance the nucleation density and adhesion strength of coating-substrate. Thin film coating experiment is conducted on the substrates of four different sample groups. Indentation and wear tests are performed on coated inserts to evaluate the effect of sandblasting on the adhesion strength of the coatings. A theoretical analysis is provided on the formation and growth of atom clusters in terms of the contact angle and the thermodynamic barrier of a substrate to predict thin film nucleation.展开更多
The effects of indium composition in InGaAs interlayer and on optical properties of GaSb/InGaAs QD material on morphology of GaSb/InGaAs quantum dots （QDs） system are studied. AFM images show that the change of the ...The effects of indium composition in InGaAs interlayer and on optical properties of GaSb/InGaAs QD material on morphology of GaSb/InGaAs quantum dots （QDs） system are studied. AFM images show that the change of the indium composition in InGaAs interlayer can alter the GaSb QD morphology. It is found that low indium composition in InGaAs interlayer can promote the formation of QDs, while high indium composition can inhibit the formation of QDs. The photoluminescence （PL） spectra of GaSb/InGaAs QDs at 8 K under low excitation power indicate that the third root of the excitation power is linear with the peak position, which provides a direct evidence for their luminescence belonging to type-Ⅱ material optical transition. The PL spectra at 8 K under an excitation power of 90row show that the optical properties of GaSb/InGaAs QD material system can be affected by the indium composition in the InGaAs interlayer, and the PL peak position is linear with the indium composition. The optical properties of GaSb/InGaAs QDs can be improved by adjusting the indium composition in the InGaAs interlayer.展开更多
Influence of residual stress and surface morphology induced by shot-peening on fatigue behav- ior of a medium temperature tempered spring steel 60 Mn has been studied.The compressive residual stress induced in the nea...Influence of residual stress and surface morphology induced by shot-peening on fatigue behav- ior of a medium temperature tempered spring steel 60 Mn has been studied.The compressive residual stress induced in the near-surface region may improve fatigue limit from 930 to 1010 MPa,and the very high tensile residual stress in the interior may reduce it from 1010 to 940 MPa,whereas the severe surface damage may cause a drop-off of it from 1010 down to 800 MPa.Fatigue cracks initiated in such position where the equivalent Mises stress,including residual stress,exceeded the local strength of the material.The compressive residual stress, induced by shot-peening,may intensify the effect of crack closure,so as to decrease the crack growth rate.展开更多
A line shaped electron beam recrystallised polycrystalline silicon film on the low cost substrate was investigated for the use of the solar cell absorber. The applied EB energy density strongly influences the surface ...A line shaped electron beam recrystallised polycrystalline silicon film on the low cost substrate was investigated for the use of the solar cell absorber. The applied EB energy density strongly influences the surface morphology of the film system. Lower EB energy density results in droplet morphology and the rougher SiO2 capping layer due to the low fluidity. With the energy increasing, the capping layer becomes smooth and continuous and less and small pinholes form in the silicon film. Tungstendisilicide (WSi2) is formed at the interface tungsten/silicon but also at the grain boundaries of the silicon. Because of the fast melting and cooling of the silicon film, the eutectic of silicon and tungstendisilicide mainly forms at the grain boundary of the primary silicon dendrites. The SEM-EDX analysis shows that there are no chlorine and hydrogen in the area surrounding a pinhole after recrystallization because of outgassing during the solidification.展开更多
This work focuses on the structure and magnetic properties of Fe-50wt% Ni permalloy manufactured from the pre-alloyed powder by selective laser melting (SLM). The selective laser melted (SLMed) alloys were characteriz...This work focuses on the structure and magnetic properties of Fe-50wt% Ni permalloy manufactured from the pre-alloyed powder by selective laser melting (SLM). The selective laser melted (SLMed) alloys were characterized by a 3D profilometer,optical microscope, scanning electron microscope, X-ray diffraction, etc. The effects of the volume energy density of laser(LVED) on structure, and magnetic properties with coercivity ( H), remanence ( B), and power losses ( P), were evaluated and discussed systematically. The results show that the relative porosity rate and the surface roughness of the SLMed specimens decreased with the increase in LVED. Only the γ-(FeNi) phase was detected in the X-ray diffraction patterns of the SLMed permalloys fabricated from the different LVEDs. Statistical analysis of optical microscopy images indicated that the grain coarsened at higher LVED. Furthermore, the microstructure of the SLMed parts was a typical columnar structure with an oriented growth of building direction. The highest microhardness reached 198 HV. Besides, the magnetic properties including B, H, and Pof SLMed samples decreased when the LVED ranged from 33.3 to 60.0 J/mm ~3 firstly and then increased while LVED further up to 93.3 J/mm, which is related to the decrease in porosity and the increase in grain size, while the higher residual stress and microcracks presented in the samples manufactured using very high LVED. The observed evolution of magnetic properties and LVED provides a good compromise in terms of reduced porosity and crack formation for the fabrication of SLMed Fe-50 wt% Ni permalloy. The theoretical mechanism in this study can offer guidance to further investigate SLMed soft magnetic alloys.展开更多
基金financially supported by the National Natural Science Foundation of China(No.41976205)the National Key R&D Program of China(No.2018YFC031 0000)the Open Funding of Qingdao National Laboratory for Marine Science and Technology(No.QNLM20 16ORP0203)
文摘Study of the surface morphology of gas hydrate is of great importance in understanding its physical properties and occurrence.In order to investigate the surface morphology of different types(sI and sII)and occurrences(pore-filling and fracture-filling)of gas hydrate,both lab-synthesized and drilled-gas hydrate samples were measured using cryo-scanning electron microscopy(cryo-SEM).Results showed that the surface of s I hydrate was relatively smooth,and spongy nano-pores(200–400 nm)gradually occurred at the surface during continuous observation.The surface of sII hydrate was more compact,showing a tier-like structure.Hydrate occurred in quartz sand and usually filled the pores of the sediments and both hydrate and sediments were cemented with each other.SEM observation of the gas hydrates collected from the South China Sea showed that the surface morphology and contact relation with sediments varied with hydrate occurrence.For instance,hydrates dispersed in sediments mainly filled the pores of the sediments.The existence of microorganism shells,such as foraminifera,was beneficial to the formation of gas hydrate.When hydrate occurred as a massive or vein structure,it was easily distinguished from the surrounding sediments.The surface of hydrate with massive or vein structure showed two distinct characters:one was dense and smooth,the other is porous(several to tens of micrometers in diameter).The occurrence of different hydrate morphologies was probably caused by the supplement rates of methane gas.
基金supported by the National Key Technologies Research and Development Program in the Eleventh Five-Year Plan of China (Grant No.2008BAD98B02, 2006BAC01A11)the Western Light Program of Talents Cultivating of CAS (2008)+1 种基金the National Natural Sciences Foundation of China (Grant No. 30470297)the Foundation of Key Laboratory of Mountain Hazards and Surface Process, CAS
文摘Surface morphology of soil cracks is one of the important factors influencing the water evaporation rate in cracked soil in Yuanmou Dry-hot Valley Region,Southwest China. Quantitative study of the complicated surface morphology of soil cracks is a prerequisite for further studies of soil-cracking mechanisms. The present paper establishes a quantitative indicator system by application of concepts and methods originating from Fractal Geometry and Network Analysis. These indicators can effectively express the complicated features of soil-crack network structure. Furthermore,a series of values related to soil-crack morphology was obtained by image processing on field photos of soil-crack quads,and gradation criteria for the degree of development of soil cracks were determined. Finally,the changes in values of the morphological indicators under different degrees of development were analyzed in detail. Our results indicate that (1) the degree of development of soil cracks can be divided into five grades,i.e.,feeble development,slight development,medium development,intensive development and extremely intensive development; (2) the values of the indicators change predictably with increasing degree of development of soil cracks. The area density (Dc) increases,and both the area-weighted mean ratio of crack area to perimeter (AWMARP),which reflects the intensity of cracking,and the index r,which is related to the connectivity of a soil crack,grow uniformly (albeit with different forms). AWMRAP increases at a geometric rate while r shows logarithm-mic growth,indicating a gradual increase in theconnectivity of a soil crack. Nevertheless,the area-weighted mean of soil-crack fractal dimension (AWMFRAC) shows a decreasing trend,indicating a gradual decline in the complexity of cracks as area density increases.
基金Project(51274249)supported by the National Natural Science Foundation of ChinaProject(2015zzts076)supported by the Explore Research Fund for Graduate Students of ChinaProject(201406)supported by the Hunan Key Laboratory of Coal Resources and Safe Mining Open-end Funds,China
文摘In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock joint surface were precisely calculated by means of a three-dimensional laser scanning machine.All test results were analyzed to investigate the shear behavior and normal displacement behavior of rock joints under CNL conditions.Degradation of rock joint surface during cyclic shear tests was also analyzed.The comparison results of the height parameters and the hybrid parameters of the joint surface during cyclic tests show that the degradation of the surface mostly happens in the first shear and the constant normal loads imposed on the joints have significant promotion effects on the morphology degradation.During cyclic shear tests,joints surfaces evolve from rough state to smooth state but keep an overall undulation.Dilatancy of rock joints degrades with the degradation of joint surface and the increase of normal loads.The closure deformation of joint is larger than that of the intact rock,and the normal stiffness increases with the increase of shearing times.
基金the National Natural Science Foundation of China (30470297)the National Key Technologies Research and Development Program in the Eleventh Five-Year Plan of China (2006BAC01A11)the Youth Foundation of Institute of Mountain Hazards and Environment of Chinese Academy of Sciences
文摘Quantification of complicated surface morphology of soil crack is a prerequisite and key to soil crack study. This paper takes soil crack quads in Yuanmou arid-hot valley region as examples, selecting several morphological indicators, and analyzes the soil crack＇s morphological features under various development degrees. By statistic analysis, three quantitative indicators for surface morphology are selected, namely soil crack area density, area weighted mean fractal dimension and connectivity index R, which can not only express the development intensity of soil cracks, but also effectively describe its morphological complexity and connectivity. The research results set a good base for the establishment of soil crack assessment system in Yuanmou arid-hot valley region.
基金financial support from the National Natural Science Foundation of China (China, Grant No. 51874340)the Natural Science Foundation of Shandong Province (China, Grant No. ZR2018MEE004)。
文摘In order to further understand the effect of solid impurities on pipeline wall during erosion,the particle impact process without fluid was extracted for specific study.The effect of multi-impact particles on the wall of pipeline was studied experimentally and simulated.In this experiment,an improved ejection apparatus was implemented to carry out multi-impacts non-overlapping impingement by rhombic particles made of high speed steel(W18Cr4V)on the AA6061 aluminum alloy plate through changing particle angle,incident angle,orientation angle and impact velocity.As a result,each particle's penetration depth was investigated and particles' rebound trajectory can be described through this experiment as well as surface morphology of the target material after impingement.The ductile damage criterion,shear damage criterion and MSFLD damage criterion were jointly implemented in ABAQUS/CAE software to simulate the whole process of collision which proved to be effective by getting consistent result compared with experimental data.It is found that under the condition of continuous non-overlapping impact,the target material produces a small work hardening effect in the impact area by converting kinetic energy of moving particles into internal energy of plate so as to reduce the penetration depth of each impact particle.
基金supported by the National Key R&D Program of China(No.2020YFB2010600)。
文摘This paper aims to characterise surface morphology and 3D roughness parameters of unidirectional carbon fibre reinforced plastic(UD-CFRP)milled at 0°,45°,90°,and 135°fibre orientation angles(FOAs).Side milling experiments are conducted on UD-CFRP laminates.Surface damage forms and texture direction of milled surface are analysed.Spatial frequency of defects on CFRP surface is quantitatively determined using radially averaged 2D PSD.The kinematicdynamic surface topography is reconstructed considering feed,runout and vibration,then the ideal roughness parameters,S_(a),S_(q),S_(sk),and S_(ku)are calculated and compared with the measured ones,finally the material factor-induced roughness components are quantified.Results show that CFRP surface has no regular feed marks.The frequency of fibre breakage or surface defects is greater than tooth passing frequency.FOAs sorted by their average S_(a)in descending order is135°>90°>45°>0°,where surface defects contribute 93.9%,77.1%,73.2%,72.2%of the total roughness respectively,which suggests that surface defects show a more important role than tool kinematics and vibration in formation of milled surface.The negative Skewness(Ssk<0)and high Kurtosis(S_(ku)=4.0–11.5)of milled surface signify porosity and the presence of many anomalous deep valleys in milled surface,respectively.
文摘The effect of dust particles on electric contacts and a hazardous size range of hard dust particles using a rigid model were discussed before. As further research, elastic-plastic model of finite element analysis was established in this work, which is closer to real condition. In this work, the behavior of large size and small size particles, and the influence of particles hardness were investigated. The calculating result of small-size particles presents a general hazardous size coefficient for different contact surface morphology; for large-size particles, it presents a hazardous size coefficient for complicated composition of the dust. And the effect of the dust shape is also discussed.
基金financially supported by the National Magnetic Confinement Fusion Program of China (No. 2015GB109003)National Natural Science Foundation of China (Nos. 51171006 and 51471015)
文摘This study was conducted to investigate the influence of pulse parameters on the surface morphology and crystal orientation of the tungsten coatings electrodeposited on pure copper substrates. The deposited coatings were analyzed by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and energy-dispersive spectrometer （EDS）. SEM analysis indicates that pulse parameters have significant influences on the surface morphology of the deposited coatings. Meanwhile, the change in grain size of the tungsten coatings demonstrates that the change in frequency and duty cycle could cause the variation of nucleation rate and grain growth of deposits. Moreover, no obvious diffusion layer at the coating/substrate interface is found by line analysis of EDS. XRD results reveal that tungsten coatings are of bcc structure and the preferred orientation of the deposits varies with duty cycle and period.
基金supported by the National Basic Research Program of China (No. 2011CB605602)
文摘Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface structures, surface morphology and residual mechanical properties were characterized. The crystallite size （La） of carbon fibers would be interrupted due to excessive electrochemical etching, while the crystallite spacing （d（002）） increased as increasing current density. The disordered structures on the surface of carbon fiber with rough surface increased at the initial oxidation stage and then removed by further electrochemical etching, which resulting in continuous increase of the extent of graphitization on the fiber surface. However, the electrochemical etching was beneficial to getting ordered morphology on the surface for carbon fiber with smooth surface, especially when the current density was lower than 1.77 A/m 2 . The tensile strength and tensile modulus could be improved by 17.27% and 5.75%, respectively, and was dependent of surface morphology. The decreasing density of carbon fibers probably resulted from the volume expansion of carbon fibers caused by the abundant oxygen functional groups intercalated between the adjacent graphite layers.
文摘Rotation angle of the laser scan direction between two adjacent layers is a key controlling parameter during the high-power (≥ 1 kW) laser powder bed fusion (HP-LPBF) process. This study investigates the influences of rotation angles (θ = 0°, 45°, 90°, 105°) on the surface morphology, microstructure, and mechanical properties of Inconel 718 (IN718) alloy produced by HP-LPBF. Results show that adopting low rotation angles (e.g., 0° and 45°) is prone to relatively poor surface finish and lack-of-fusion defects, whereas adopting high rotation angles (e.g., 90° and 105°) induces smaller surface roughness and better relative density. Each case reveals a noticeable edge effect but the maximal heights witness a downward trend with the increase of rotation angle. There are some minor differences in the primary dendrite arm spacing and grain morphology by varying the rotation angles. Moreover, the tensile property is slightly enhanced as the rotation angle increases. The present work suggests that high rotation angles like 90° and 105° would probably be more favorable for the 1 kW HP-LPBF process than rotation angles with relatively low values.
基金This work was financially supported by the National Key R&D Program of China(Grant No.2020YFB1711300)the National Natural Science Foundation of China(Grant No.52275425)the Natural Science Foundation of Guangdong Province for Distinguished Young Scholars(Grant No.2021B1515020087).
文摘Learning hydrophobic phenomena from nature is always a promising approach to design the superhydrophobic surface.Purple orchid leaf which processes superhydrophobicity is an ideal plant model,and through mimicking its structure,the surface with excellent hydrophobicity is able to be obtained.However,the unclear of the diversity in wettability during the different vegetation stages and the absence of its relation to the surface morphology limits the further enhancement of the inspired structure.Here,we analyze the wettability difference as the leaf grows from tender to mature and then to senescent.Combining with the variation of surface morphology and chemical composition,the well-developed micro-scale basic unit bumps with dense nano-scale waxy layer on the surface are proven to be responsible for the best hydrophobicity of the mature leaf.The presence of the undeveloped or damaged micro-nano hierarchical structure reduces the formation of air pockets at the interface,leading to the decrease of the wettability for leaves at other stages.Moreover,by fabricating artificial leaves,the nano-waxy layer is proved to be more effective than that of the micro-bumps on the surface wettability.The results of study are of a great significance for guiding the design and fabrication of plant-inspired bionic superhydrophobic surface.
基金Project supported by the National Natural Science Foundation of China （Grant No 60376001）, the National Basic Research Program of China （Grant No 2002CB311904） and the National Defense Basic Research Program of China （Grant No 51327020202）. The authors express their gratitude to Ma Nongnong of Tianjin Electronic Materials Research Institute for performing SIMS measurements and to Li Ying of Xi＇an University of Technology for performing XPS measurements.
文摘The diffusion behaviours of vanadium implanted p- and n-type 4H-SiC are investigated by using the secondary ion mass spectrometry （SIMS）. Significant redistribution, especially out-diffusion of vanadium towards the sample surface is not observed after 1650 ℃annealing for both p- and n-type samples. Atomic force microscopy （AFM） is applied to the characterization of surface morphology, indicating the formation of continuous long furrows running in one direction across the wafer surface after 1650 ℃ annealing. The surface roughness results from the evaporation and re-deposition of Si species on the surface during annealing. The chemical compositions of sample surface axe investigated using x-ray photoelectron spectroscopy （XPS）. The results of C ls and Si 2p core-level spectra axe presented in detail to demonstrate the evaporation of Si from the wafer and the deposition of SiO2 on the sample surface during annealing.
基金Supported by the National Key Research and Development Program of China under Grant No 2016YFB0400200
文摘We investigate the influence of A1 preflow time on surface morphology and quality of AIN and GaN. The AIN and GaN layers are grown on a Si （111） substrate by metal organic chemical vapor deposition. Scanning electron microscopy, atomic force microscopy, x-ray diffraction and optical microscopy are used for analysis. Consequently, we find significant differences in the epitaxial properties of AlN buffer and the GaN layer, which are dependent on the AI preflow time. A1 preflow layers act as nucleation sites in the case of AiN growth. Compact and uniform AIN nucleation sites are observed with optimizing A1 preflow at an early nucleation stage, which will lead to a smooth AIN surface. Trenches and AlN grain clusters appear on the AIN surface while meltoback etching occurs on the GaN surface with excessive A1 preflow. The GaN quality variation keeps a similar trend with the AIN quality, which is influenced by AI preflow. With an optimized duration orAl preflow, crystal quality and surface morphology of AIN and GaN could be improved.
基金We are grateful for the financial support from the National Key Research and Development Program“Additive Manufacturing and Laser Manufacturing”(Nos.2016YFB1100101,2018YFB1106302)the National Natural Science Foundation of China(Nos.51790175,51735005)+3 种基金the Fundamental Research Funds for the Central Universities(No.NC2020004),the financial support from the Innovation Fund of National Engineering and Research Center for Commercial Aircraft Manufacturing(No.COMAC-SFGS-2016-33238)National Natural Science Foundation of China for Creative Research Groups(Grant No.51921003)The 15th Batch of“Six Talents Peaks”Innovative Talents Team Program“Laser Precise Additive Manufacturing of Structure-Performance Integrated Lightweight Alloy Components”(No.TD-GDZB-001)(Jiangsu Provincial Department of Human Resources and Social Security of China)2017 Excellent Scientific and Technological Innovation Teams of Universities in Jiangsu“Laser Additive Manufacturing Technologies for Metallic Components”(Jiangsu Provincial Department of Education of China).
文摘The three-dimensional physical model of the randomly packed powder material irradiated by the laser beam was established,taking into account the transformation of the material phase,the melt spreading and the interaction of the free surface of the molten pool and the recoiling pressure caused by the material evaporation during the selective laser melting.Influence of the processing parameters on the thermal behavior,the material evaporation,the surface morphology and the densification behavior in the connection region of the molten pool and the substrate was studied.It was shown that the powder material underwent the transformation from the partial melting state to the complete melting state and finally to the overheating state with the applied laser energy density increasing from 167 J/mm^(3) to 417 J/mm^(3).Therefore,the solidified track ranged from the discontinuous tracks with the rough surface to the continuous tracks with residual porosities,then to the continuous and dense tracks and terminally to the fluctuated tracks with the increase in the laser energy density.Meanwhile,the laser energy effect depth was maintained the positive relationship with the laser energy density.The vortex velocity obtained in the free surface of the molten pool towards to the rear region in the opposite laser scan direction promoted the melt convection to the edge region of the molten pool as the laser energy density was higher than 277 J/mm^(3),demonstrating the efficient energy dissipation from the center of the irradiation region to the whole part of the molten pool and the attendant production of the sufficient melt volume.Therefore,the efficient spreading of the molten pool and the metallurgical bonding ability of the melt with the substrate was obtained at the optimized laser energy density of 277 J/mm^(3).However,the severe material evaporation would take place as the melt was overheated,resulting in the formation of the residual pores and poor surface quality.
基金The National Nature Science Foundation of China(No.u0837601)
文摘By means of breaking tests on PtIr contact materials via a JF04C contact material testing machine, it was attempted to elucidate the characteristics of the various surface morphology and material transfer after the arc erosion process caused by break arc. The material transfer characteristics appeared in the experiments were concluded and analyzed. Meanwhile, the morphology of the anode and cathode surface were observed and analyzed by SEM.
基金This project is Supported by National Science Foundation of China (No.59475090)National Science Foundation of USA (No.DDM-93-9669)
文摘Premature failure of coated tool often results from a poor adhesion of coating-substrate and shortens the lifetime of the tool. The results of increasing the adhesion strength of thin film coatings on cutting tool inserts by pretreating the inserts with sandblasting technique to obtain a desirable surface morphology of the inserts are presented. A geometric model representing the ideal surface morphology is established to enhance the nucleation density and adhesion strength of coating-substrate. Thin film coating experiment is conducted on the substrates of four different sample groups. Indentation and wear tests are performed on coated inserts to evaluate the effect of sandblasting on the adhesion strength of the coatings. A theoretical analysis is provided on the formation and growth of atom clusters in terms of the contact angle and the thermodynamic barrier of a substrate to predict thin film nucleation.
基金Supported by the Science and Technology Planning Projects of Guangdong Province under Grant Nos 2014B050505020,2015B010114007 and 2014B090904045the Research Fund for the Doctoral Program of Higher Education of China under Grant No 20134407110008+1 种基金the Guangzhou Science and Technology Project of Guangdong Province under Grant No 2016201604030027the Zhongshan Science and Technology Project of Guangdong Province under Grant No 2013B3FC0003
文摘The effects of indium composition in InGaAs interlayer and on optical properties of GaSb/InGaAs QD material on morphology of GaSb/InGaAs quantum dots （QDs） system are studied. AFM images show that the change of the indium composition in InGaAs interlayer can alter the GaSb QD morphology. It is found that low indium composition in InGaAs interlayer can promote the formation of QDs, while high indium composition can inhibit the formation of QDs. The photoluminescence （PL） spectra of GaSb/InGaAs QDs at 8 K under low excitation power indicate that the third root of the excitation power is linear with the peak position, which provides a direct evidence for their luminescence belonging to type-Ⅱ material optical transition. The PL spectra at 8 K under an excitation power of 90row show that the optical properties of GaSb/InGaAs QD material system can be affected by the indium composition in the InGaAs interlayer, and the PL peak position is linear with the indium composition. The optical properties of GaSb/InGaAs QDs can be improved by adjusting the indium composition in the InGaAs interlayer.
文摘Influence of residual stress and surface morphology induced by shot-peening on fatigue behav- ior of a medium temperature tempered spring steel 60 Mn has been studied.The compressive residual stress induced in the near-surface region may improve fatigue limit from 930 to 1010 MPa,and the very high tensile residual stress in the interior may reduce it from 1010 to 940 MPa,whereas the severe surface damage may cause a drop-off of it from 1010 down to 800 MPa.Fatigue cracks initiated in such position where the equivalent Mises stress,including residual stress,exceeded the local strength of the material.The compressive residual stress, induced by shot-peening,may intensify the effect of crack closure,so as to decrease the crack growth rate.
基金This project was financially supported by the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (No.0329571B).
文摘A line shaped electron beam recrystallised polycrystalline silicon film on the low cost substrate was investigated for the use of the solar cell absorber. The applied EB energy density strongly influences the surface morphology of the film system. Lower EB energy density results in droplet morphology and the rougher SiO2 capping layer due to the low fluidity. With the energy increasing, the capping layer becomes smooth and continuous and less and small pinholes form in the silicon film. Tungstendisilicide (WSi2) is formed at the interface tungsten/silicon but also at the grain boundaries of the silicon. Because of the fast melting and cooling of the silicon film, the eutectic of silicon and tungstendisilicide mainly forms at the grain boundary of the primary silicon dendrites. The SEM-EDX analysis shows that there are no chlorine and hydrogen in the area surrounding a pinhole after recrystallization because of outgassing during the solidification.
基金financially supported by the Sciences Platform Environment and Capacity Building Projects of GDAS(No.2021GDASYL-20210102005)the Guangdong Special Support Program(No.2019BT02C629)+2 种基金the GuangDong Basic and Applied Basic Research Foundation(Nos.2020A1515111031 and 2021A515010939)the Guangzhou Major Projects of Industry University-Research(IUR)Collaborative Innovation“Surface Treatment and Repair for Key Components of Industrial Gas Turbine(IGT).”support from the program of CSC(No.201801810066)support from the program of CSC(No.201801810106)。
文摘This work focuses on the structure and magnetic properties of Fe-50wt% Ni permalloy manufactured from the pre-alloyed powder by selective laser melting (SLM). The selective laser melted (SLMed) alloys were characterized by a 3D profilometer,optical microscope, scanning electron microscope, X-ray diffraction, etc. The effects of the volume energy density of laser(LVED) on structure, and magnetic properties with coercivity ( H), remanence ( B), and power losses ( P), were evaluated and discussed systematically. The results show that the relative porosity rate and the surface roughness of the SLMed specimens decreased with the increase in LVED. Only the γ-(FeNi) phase was detected in the X-ray diffraction patterns of the SLMed permalloys fabricated from the different LVEDs. Statistical analysis of optical microscopy images indicated that the grain coarsened at higher LVED. Furthermore, the microstructure of the SLMed parts was a typical columnar structure with an oriented growth of building direction. The highest microhardness reached 198 HV. Besides, the magnetic properties including B, H, and Pof SLMed samples decreased when the LVED ranged from 33.3 to 60.0 J/mm ~3 firstly and then increased while LVED further up to 93.3 J/mm, which is related to the decrease in porosity and the increase in grain size, while the higher residual stress and microcracks presented in the samples manufactured using very high LVED. The observed evolution of magnetic properties and LVED provides a good compromise in terms of reduced porosity and crack formation for the fabrication of SLMed Fe-50 wt% Ni permalloy. The theoretical mechanism in this study can offer guidance to further investigate SLMed soft magnetic alloys.
