Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and hi...Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical properties.Inspired by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this gap.First,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent biocompatibility.Furthermore,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell growth.Interestingly,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT strategies.Animal experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.展开更多
Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy wi...Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy without sacrificing its initial Coulombic efficiency remains a challenge in sodium ion batteries.A simple liquid-phase coating approach has been used to generate a pitch-derived soft carbon layer on the HC surface,and its effect on the porosity of HC and SEI chemistry has been studied.A variety of structural characterizations show a soft carbon coating can increase the defect and ultra-micropore contents.The increase in ultra-micropore comes from both the soft carbon coatings and the larger pores within the HC that are partially filled by pitch,which provides more Na+storage sites.In-situ FTIR/EIS and ex-situ XPS showed that the soft carbon coating induced the formation of thinner SEI that is richer in NaF from the electrolyte,which stabilized the interface and promoted the charge transfer process.As a result,the anode produced fastcharging(329.8 mAh g^(−1)at 30 mA g^(−1)and 198.6 mAh g^(−1)at 300 mA g^(−1))and had a better cycling performance(a high capacity retention of 81.4%after 100 cycles at 150 mA g^(−1)).This work reveals the critical role of coating layer in changing the pore structure,SEI chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced fast charging capability.展开更多
Magnesium(Mg)and its alloys,as the lowest density metallic structural alloys,have been widely employed across various industries,including electronic communication,automotive,aircraft,defense,and military.While Mg all...Magnesium(Mg)and its alloys,as the lowest density metallic structural alloys,have been widely employed across various industries,including electronic communication,automotive,aircraft,defense,and military.While Mg alloys are susceptible to issues like pitting or stress corrosion when utilized as key structural components in humid environments,resulting in corrosion fatigue,stress corrosion cracking,or even complete corrosion failure,which impedes their broader applications.To address these disadvantages of Mg alloys,surface selfnanocrystallization(SSNC),involving refining the grain size to create a nanosurface layer,has been proposed to delay or mitigate the initiation and propagation of cracks,thereby significantly enhancing corrosion resistance.The purpose of this paper is to review the effects of various surface self-nanocrystallization techniques,including surface mechanical attrition treatment,high-energy shot peening,ultrasonic surface rolling processing,laser shock peening,and supersonic particle bombardment,on the microstructure and properties of Mg alloys.Additionally,the mechanisms underlying the surface nanocrystallization-induced microstructural evolution in Mg alloys and the factors influencing their corrosion resistance are systematically summarized.Finally,the current challenges and prospects are discussed as well.展开更多
Fe-based superconductors represent a fascinating class of materials,extensively studied for their complex interplay of superconductivity,magnetism,spin density waves,and nematicity,along with the interactions among th...Fe-based superconductors represent a fascinating class of materials,extensively studied for their complex interplay of superconductivity,magnetism,spin density waves,and nematicity,along with the interactions among these orders.An intriguing yet unexplained phenomenon observed in Fe-based superconductors is the emergence of superconductivity below 25K in the non-superconducting parent compound SrFe_(2)As_(2)following exposure to water at its surface.In this study,we employed in situ angle-resolved photoemission spectroscopy and low-energy electron diffraction to meticulously examine the electronic structure evolution of SrFe_(2)As_(2)upon in situ water dosing.Our findings indicate that water dosing markedly attenuates the spin density wave phase and surface Sr reconstruction while preserving the nematic order in SrFe_(2)As_(2).Furthermore,we detected an enhancement in the spectral weight of bands near the Fermi level.Our observations highlight the critical role of the intricate interplay among various orders induced by water dosing,which effectively modifies the band structure and favors the emergence of superconductivity in SrFe_(2)As_(2).展开更多
Enhancing the lubricating properties and antibacterial adhesion resistance of implantable medical materials is critical to prevent soft tissue injury during implantation and the formation of bacterial biofilms.Prior s...Enhancing the lubricating properties and antibacterial adhesion resistance of implantable medical materials is critical to prevent soft tissue injury during implantation and the formation of bacterial biofilms.Prior studies may have exhibited limitations in the preparation methodologies and long-term stability of coatings for implantable medical materials.In this study,we developed a multilayered hybrid hydrogel coating method based on the rate difference of polymerization initiation on the material surface.The acquired coating with persistent lubrication capability retained its functionality after 2×10^(4) cycles of friction and 21 days of PBS immersion.A quaternary ammonium salt coating with antibacterial properties was introduced to further functionalize the coating.Animal experiments demonstrated that this coating exhibited remarkable effects on delaying encrustation and bacterial colonization.These studies indicate that this simple method of introducing lubricating and antibacterial coatings on catheters is likely to enhance the biocompatibility of medical devices and has broad application prospects in this field of medical devices.展开更多
In the aerospace field,hole burnishing enhancement plays an essential role in improving the service performance of load-bearing holes.To satisfy the assembly accuracy and strength requirements,the structure shape and ...In the aerospace field,hole burnishing enhancement plays an essential role in improving the service performance of load-bearing holes.To satisfy the assembly accuracy and strength requirements,the structure shape and surface integrity must be considered simultaneously during the enhancement process.The current manufacturing process of hole burnishing has a relatively weak balance between the structure shape and surface integrity;therefore,it is necessary to analyze the mechanism and optimize the parameters to improve the strengthening effect of the holes.In this study,a two-dimensional longitudinal simplified model for the hole burnishing process was established,and the reasons for the surface roughness improvement of the hole wall and material accumulation on the upper surface were analyzed.Experiments were conducted to determine the influence of the burnishing parameters on the structure shape(material accumulation,shape contour,and roundness)and surface integrity(surface roughness,residual stress,and surface hardness),based on the opposite requirements of improving the structure shape and surface integrity for the burnishing depth(BD).The results showed that with an increase in the BD,the structure shape deteriorated,whereas the surface integrity improved.Fatigue behavior verification experiments were conducted,and parameter selection schemes for the collaborative improvement of the structure shape and surface integrity were discussed.For the holes of titanium alloy TB6(Ti-10V-2Fe-3Al),the fatigue life can be increased by 162%when the BD,spindle speed,and feed rate were 0.20 mm,200 r/min,and 0.2 mm/r,respectively.展开更多
Iron oxide nanoparticles(IONPs)with intrinsic peroxidase(POD)-mimic activity have gained significant attention as nanozymes.Reducing sizes of IONPs is the mostly applied strategy to boost their enzymatic activity due ...Iron oxide nanoparticles(IONPs)with intrinsic peroxidase(POD)-mimic activity have gained significant attention as nanozymes.Reducing sizes of IONPs is the mostly applied strategy to boost their enzymatic activity due to their high specific surface areas.Herein,we synthesized a series of uniformly sized IONPs ranging from3.17 to 21.2 nm,and found that POD activity of IONPs is not monotone increased by reducing their sizes,with the optimal size of 7.82 nm rather than smaller sized 3.17 nm.The reason for this unnormal phenomenon is that electronic structure also had great influence on POD activity,especially at the ultrasmall size region.Since Fe^(2+)are with higher enzymatic activity than Fe^(3+),3.17 nm IONPs although have the largest specific surface area,are prone to be oxidized,which reduced their iron content and ratio of Fe^(2+)to Fe^(3+),and consequently decreased their POD activity.By intentionally oxidized 7.82 nm IONPs in air,POD activity was obviously reduced,illustrating electronic structure cannot be overlooked.At the larger sized region ranging from 7.82 to 21.2 nm,oxidation degree of IONPs is similar,and surface electronic structure had a negligible effect on POD activity,and therefore,POD activity is predominantly influenced by specific surface area.By using the optimized 7.82 nm IONPs,tumor growth was obviously inhibited,demonstrating their potential in cancer therapeutics.Our results reveal that the designing of nanozymes should comprehensively balance their influence of surface electronic structure and specific surface area.展开更多
As cathode materials for alkali-ion batteries,sodium manganese oxides have been receiving considerable and continuous attention in recent decades.In this work,the structure and environment-dependent stability of NaMn_...As cathode materials for alkali-ion batteries,sodium manganese oxides have been receiving considerable and continuous attention in recent decades.In this work,the structure and environment-dependent stability of NaMn_(2)O_(4) surface were studied based on the first principles calculations.The surface stability diagram of NaMn_(2)O_(4) involving various different terminations of(100),(110)and(111)surfaces was constructed,and the stability of these different terminations could be compared as a function of chemical environment.It is found that the(100)-MnO and(111)-ONa terminations are two more stable terminations under the investigated chemical conditions.And the surface energies of(110)surfaces are negative under the investigated chemical potential,hence,(110)surfaces are unstable.The surface energy of NaMn_(2)O_(4) as a function of O chemical potential is also investigated under constant Na chemical potential.The structure relaxation indicates that the surface rumpling and surface reconstruction can affect the electronic structure of the surface,thereby reducing surface energy and stabilizing the surface.Furthermore,the Wulff shape of NaMn_(2)O_(4) was also constructed based on Gibbs-Wulff theorem.展开更多
Surface/underwater target classification is a key topic in marine information research.However,the complex underwater environment,coupled with the diversity of target types and their variable characteristics,presents ...Surface/underwater target classification is a key topic in marine information research.However,the complex underwater environment,coupled with the diversity of target types and their variable characteristics,presents significant challenges for classifier design.For shallow-water waveguides with a negative thermocline,a residual neural network(ResNet)model based on the sound field elevation structure is constructed.This model demonstrates robust classification performance even when facing low signal-to-noise ratios and environmental mismatches.Meanwhile,to address the reduced generalization ability caused by limited labeled acoustic data,an improved ResNet model based on unsupervised domain adaptation(“proposed UDA-ResNet”)is further constructed.This model incorporates data on simulated elevation structures of the sound field to augment the training process.Adversarial training is employed to extract domain-invariant features from simulated and trial data.These strategies help reduce the negative impact caused by domain differences.Experimental results demonstrate that the proposed method shows strong surface/underwater target classification ability under limited sample sizes,thus confirming its feasibility and effectiveness.展开更多
The wettability of materials used in the production of devices employed in various technological domains have attracted significant attentions.Therefore,it is important to design the surfaces of these materials such t...The wettability of materials used in the production of devices employed in various technological domains have attracted significant attentions.Therefore,it is important to design the surfaces of these materials such that they can provide the required surface free energy and simplify the interfacial structure.Herein,various Cu films with a highly controllable surface wettability and a wide range of contact angles ranging from 6°to 152°were fabricated,and the corresponding mechanism was discussed.A wide range of wettability was realized by controlling the surface structure of the Cu film.The nanogap structure of the vertical nanowire-array film led to a high surface free energy.Similarly,the oblique nanowirearray film increased the surface free energy;however,the surface free energy was dependent on the size of the nanowires rather than on the nanogaps owing to the crystallinity of the film.Additionally,cluster-nanowire-array films were designed to realize a wettability transition from hydrophilicity to hydrophobicity with a constant surface free energy.The Cu foam possessed a superhydrophilic surface owing to its high porosity,whereas the cluster-nanoparticle structure possessed a superhydrophobic surface.In addition,we noted that the structure-induced wettability played an important role in tuning the semiconductor and metal interfacial stress and simplifying the interfacial structure.Furthermore,the outstanding electrical conductivity of the Cu films indicates its promising potential as an electrode.The structure-induced wettability proposed in this study can be applied for a wide range of materials,particularly for films used for advanced applications.展开更多
The simulation mechanism of surface plasmon polaritons(SPPs)and localized surface plasmon(LSP)in different structures was studied,including the Au reflection grating(Au grating),Au substrate with dielectric ribbons gr...The simulation mechanism of surface plasmon polaritons(SPPs)and localized surface plasmon(LSP)in different structures was studied,including the Au reflection grating(Au grating),Au substrate with dielectric ribbons grating(Au substrate grating),and pure electric conductor(PEC)substrate with Au ribbons grating(Au ribbons grating).And the characteristics of the Smith-Purcell radiation in these structures were presented.Simulation results show that SPPs are excited on the bottom surface of Au substrate grating grooves and LSP is stimulated on the upper surface both of Au ribbons grating grooves and Au grating grooves.Owing to the irreconcilable contradiction between optimizing the grating diffraction radiation efficiency and optimizing the SPPs excitation efficiency in the Au substrate grating,only 40-times enhancement of the radiation intensity was obtained by excited SPPs.However,the LSP enhanced structure overcomes the above problem and gains much better radiation enhancement ability,with about 200-times enhancement obtained in the Au ribbons grating and more than 500-times enhancement obtained in the Au grating.The results presented here provide a way of developing miniature,integratable,tunable,high-power-density radiation sources from visible light to ultraviolet rays at room temperature.展开更多
Gallium nitride(GaN)has widespread applications in the semiconductor industry because of its desirable optoelectronic properties.The fabrication of surface structures on GaN thin films can effectively modify their opt...Gallium nitride(GaN)has widespread applications in the semiconductor industry because of its desirable optoelectronic properties.The fabrication of surface structures on GaN thin films can effectively modify their optical and electrical properties,providing additional degrees of freedom for controlling GaN-based devices.Compared with lithography-based techniques,laser processing is maskless and much more efficient.This paper shows how surface micronano structures can be produced on GaN thin films using 355 nm nanosecond laser irradiation.The effects of the laser pulse energy,number of pulses,and polarization direction were studied.It was found that distinct micro-nano structures were formed under different irradiation conditions,and their geometries and elemental compositions were analyzed.The results indicate that different types of surface micro-nano structures can be produced on GaN thin films in a controllable manner using 355 nm nanosecond laser irradiation.The results of our study provide valuable guidance for the surface modification of GaN-based optoelectronic devices.展开更多
An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitabl...An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.展开更多
We assembled approximately 328 seismic records. The data set was from 4 digitally recording long-period and broadband stations of CDSN. We carried out the inversion based on the partitioned waveform inversion (PWI). I...We assembled approximately 328 seismic records. The data set was from 4 digitally recording long-period and broadband stations of CDSN. We carried out the inversion based on the partitioned waveform inversion (PWI). It partitions the large-scale optimization problem into a number of independent small-scale problems. We adopted surface waveform inversion with an equal block (2((2() discretization in order to acquire the images of shear velocity structure at different depths (from surface to 430 km) in the crust and upper-mantle. The resolution of all these anomalies has been established with (check-board( resolution tests. These results show significant difference in velocity, lithosphere and asthenosphere structure between South China Sea and its adjacent regions.展开更多
This paper discusses the coloration process on the stainless steel and the properties of the film. The compositions, morphology and structure of colored films on stainless steel are studied by using SEM,AES,AFM,STM. ...This paper discusses the coloration process on the stainless steel and the properties of the film. The compositions, morphology and structure of colored films on stainless steel are studied by using SEM,AES,AFM,STM. The diffusion controlled mechanisms of films and calculation formula of surface electropotential difference are discussed.展开更多
The implementation of ultrahigh-Ni cathodes in high-energy lithium-ion batteries(LIBs)is constrained by significant structural and interfacial degradation during cycling.In this study,doping-induced surface restructur...The implementation of ultrahigh-Ni cathodes in high-energy lithium-ion batteries(LIBs)is constrained by significant structural and interfacial degradation during cycling.In this study,doping-induced surface restructuring in ultrahigh-nickel cathode materials is rapidly facilitated through an ultrafast Joule heating method.Density functional theory(DFT)calculations,synchrotron X-ray absorption spectroscopy(XAS),and single-particle force test confirmed the establishment of a stable crystal framework and lattice oxygen,which mitigated H2-H3 phase transitions and improved structural reversibility.Additionally,the Sc doping process exhibits a pinning effect on the grain boundaries,as shown by scanning transmission electron microscopy(STEM),enhancing Li~+diffusion kinetics and decreasing mechanical strain during cycling.The in situ development of a cation-mixing layer at grain boundaries also creates a robust cathode/electrolyte interphase,effectively reducing interfacial parasitic reactions and transition metal dissolution,as validated by STEM and time-of-flight secondary ion mass spectrometry(TOF-SIMS).These synergistic modifications reduce particle cracking and surface/interface degradation,leading to enhanced rate capability,structural integrity,and thermal stability.Consequently,the optimized Sc-modified ultrahigh-Ni cathode(Sc-1)exhibits 93.99%capacity retention after 100 cycles at 1 C(25℃)and87.06%capacity retention after 100 cycles at 1 C(50℃),indicating excellent cycling and thermal stability.By presenting a one-step multifunctional modification approach,this research delivers an extensive analysis of the mechanisms governing the structure,microstructure,and interface properties of nickel-rich layered cathode materials(NCMs).These results underscore the potential of ultrahigh-Ni cathodes as viable candidates for advanced lithium-ion batteries(LIBs)in next-generation electric vehicles(EVs).展开更多
Paint removal from steel structure is executed for shipyards of marine and offshore engineering.Due to environmental unfriendliness and unhealthy drawbacks of sand blasting technique, laser ablation technique is propo...Paint removal from steel structure is executed for shipyards of marine and offshore engineering.Due to environmental unfriendliness and unhealthy drawbacks of sand blasting technique, laser ablation technique is proposed as a substituting method.By absorbing high energy of the 1064 nm pulsed laser, the paint is vaporized quickly.The ablated debris is then collected by using a suction pump.Initial metal surface of the steel is exposed when laser beam irradiates perpendicularly and scans over it.The cleaned surface fulfills the requirements of surface preparation standards ISO 8501 of SA2.The adhesion is further characterized with pull-off test after carrying out painting with Jotamastic 87 aluminum paint.The repainting can be embedded onto the laser cleaned surface to bond much more tightly.The excellent adhesion strength of 20 MPa between repainted coating and the substrate is achieved, which is higher than what is required by shipyards applications.展开更多
In this work,ultrasonic surface rolling process(USRP)was utilized to produce a gradient structured layer on 7 B50-T7751 aluminum alloy,and the mechanical properties and corrosion fatigue behavior of treated samples we...In this work,ultrasonic surface rolling process(USRP)was utilized to produce a gradient structured layer on 7 B50-T7751 aluminum alloy,and the mechanical properties and corrosion fatigue behavior of treated samples were studied.These results reveal that underwent USRP,a 425~m thick gradient structure and a 700~m deep compressive residual stress field are created,aluminum grain size become fine(~67 nm),and the corrosion rate of treated surface reduces by 60.08%owing to the combined effect of compressive residual stress and surface nanocrystallization.The corrosion fatigue strength is enhanced to 117%of that of 7 B50 Al alloys by means of USRP due to the introduced compressive residual stress,which is considered as the major favorable factor in suppressing the initiation and early propagation of corrosion fatigue cracks.Besides,the gradient structure is an important factor in providing a significant synergistic contribution to the improvement of corrosion fatigue performance.展开更多
Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.Ho...Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.展开更多
The characteristics of surface maneuver targets are analyzed and a 3-D relative motion model for missiles and targets is established. A variable structure guidance law is designed considering the characteristics of ta...The characteristics of surface maneuver targets are analyzed and a 3-D relative motion model for missiles and targets is established. A variable structure guidance law is designed considering the characteristics of targets. In the guidance law, the distance between missiles and targets as well as the missile-target relative velocity are all substituted by estimation values. The estimation errors, the target＇s velocity, and the maneuver acceleration are all treated as bounded disturbance. The guidance law proposed can be implemented conveniently in engineering with little target information. The performance of the guidance system is analyzed theoretically and the numerical simulation result shows the effectiveness of the guidance law.展开更多
基金supported by the Innovative Research Group Project of the National Natural Science Foundation of China(T2121004)Key Programme(52235007)National Outstanding Youth Foundation of China(52325504).
文摘Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical properties.Inspired by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this gap.First,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent biocompatibility.Furthermore,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell growth.Interestingly,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT strategies.Animal experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.
基金National Key Research and Development Program of China(2022YFE0206300)National Natural Science Foundation of China(U21A2081,22075074,22209047)+2 种基金Guangdong Basic and Applied Basic Research Foundation(2024A1515011620)Hunan Provincial Natural Science Foundation of China(2024JJ5068)Foundation of Yuelushan Center for Industrial Innovation(2023YCII0119)。
文摘Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy without sacrificing its initial Coulombic efficiency remains a challenge in sodium ion batteries.A simple liquid-phase coating approach has been used to generate a pitch-derived soft carbon layer on the HC surface,and its effect on the porosity of HC and SEI chemistry has been studied.A variety of structural characterizations show a soft carbon coating can increase the defect and ultra-micropore contents.The increase in ultra-micropore comes from both the soft carbon coatings and the larger pores within the HC that are partially filled by pitch,which provides more Na+storage sites.In-situ FTIR/EIS and ex-situ XPS showed that the soft carbon coating induced the formation of thinner SEI that is richer in NaF from the electrolyte,which stabilized the interface and promoted the charge transfer process.As a result,the anode produced fastcharging(329.8 mAh g^(−1)at 30 mA g^(−1)and 198.6 mAh g^(−1)at 300 mA g^(−1))and had a better cycling performance(a high capacity retention of 81.4%after 100 cycles at 150 mA g^(−1)).This work reveals the critical role of coating layer in changing the pore structure,SEI chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced fast charging capability.
基金funded by the National Key R&D Program of China(No.2024YFB3713703,2023YFB3712700,2021YFB3702101)the Fundamental Research Funds for the Central Universities(2024IAIS-ZD004)+1 种基金State Key Laboratory of Mechanical Transmission for Advanced Equipment Open Fund(SKLMT-ZZKT-2024Z04)the support by the Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(311021013).
文摘Magnesium(Mg)and its alloys,as the lowest density metallic structural alloys,have been widely employed across various industries,including electronic communication,automotive,aircraft,defense,and military.While Mg alloys are susceptible to issues like pitting or stress corrosion when utilized as key structural components in humid environments,resulting in corrosion fatigue,stress corrosion cracking,or even complete corrosion failure,which impedes their broader applications.To address these disadvantages of Mg alloys,surface selfnanocrystallization(SSNC),involving refining the grain size to create a nanosurface layer,has been proposed to delay or mitigate the initiation and propagation of cracks,thereby significantly enhancing corrosion resistance.The purpose of this paper is to review the effects of various surface self-nanocrystallization techniques,including surface mechanical attrition treatment,high-energy shot peening,ultrasonic surface rolling processing,laser shock peening,and supersonic particle bombardment,on the microstructure and properties of Mg alloys.Additionally,the mechanisms underlying the surface nanocrystallization-induced microstructural evolution in Mg alloys and the factors influencing their corrosion resistance are systematically summarized.Finally,the current challenges and prospects are discussed as well.
基金supported by the National Nature Science Foundation of China[Grant Nos.92365204 and 12274298(Z.K.Liu)]the National Key R&D program of China[Grant No.2022YFA1604400/03(Z.K.Liu)]Zhangjiang Laboratory(Y.M.Zhang).The authors thank BL02B at the Shanghai Synchrotron Radiation Facility supported by the National Natural Science Foundation of China(Contract No.11227902).
文摘Fe-based superconductors represent a fascinating class of materials,extensively studied for their complex interplay of superconductivity,magnetism,spin density waves,and nematicity,along with the interactions among these orders.An intriguing yet unexplained phenomenon observed in Fe-based superconductors is the emergence of superconductivity below 25K in the non-superconducting parent compound SrFe_(2)As_(2)following exposure to water at its surface.In this study,we employed in situ angle-resolved photoemission spectroscopy and low-energy electron diffraction to meticulously examine the electronic structure evolution of SrFe_(2)As_(2)upon in situ water dosing.Our findings indicate that water dosing markedly attenuates the spin density wave phase and surface Sr reconstruction while preserving the nematic order in SrFe_(2)As_(2).Furthermore,we detected an enhancement in the spectral weight of bands near the Fermi level.Our observations highlight the critical role of the intricate interplay among various orders induced by water dosing,which effectively modifies the band structure and favors the emergence of superconductivity in SrFe_(2)As_(2).
基金financially supported by the National Natural Science Foundation of China(Nos.52373296 and 52173287)。
文摘Enhancing the lubricating properties and antibacterial adhesion resistance of implantable medical materials is critical to prevent soft tissue injury during implantation and the formation of bacterial biofilms.Prior studies may have exhibited limitations in the preparation methodologies and long-term stability of coatings for implantable medical materials.In this study,we developed a multilayered hybrid hydrogel coating method based on the rate difference of polymerization initiation on the material surface.The acquired coating with persistent lubrication capability retained its functionality after 2×10^(4) cycles of friction and 21 days of PBS immersion.A quaternary ammonium salt coating with antibacterial properties was introduced to further functionalize the coating.Animal experiments demonstrated that this coating exhibited remarkable effects on delaying encrustation and bacterial colonization.These studies indicate that this simple method of introducing lubricating and antibacterial coatings on catheters is likely to enhance the biocompatibility of medical devices and has broad application prospects in this field of medical devices.
文摘In the aerospace field,hole burnishing enhancement plays an essential role in improving the service performance of load-bearing holes.To satisfy the assembly accuracy and strength requirements,the structure shape and surface integrity must be considered simultaneously during the enhancement process.The current manufacturing process of hole burnishing has a relatively weak balance between the structure shape and surface integrity;therefore,it is necessary to analyze the mechanism and optimize the parameters to improve the strengthening effect of the holes.In this study,a two-dimensional longitudinal simplified model for the hole burnishing process was established,and the reasons for the surface roughness improvement of the hole wall and material accumulation on the upper surface were analyzed.Experiments were conducted to determine the influence of the burnishing parameters on the structure shape(material accumulation,shape contour,and roundness)and surface integrity(surface roughness,residual stress,and surface hardness),based on the opposite requirements of improving the structure shape and surface integrity for the burnishing depth(BD).The results showed that with an increase in the BD,the structure shape deteriorated,whereas the surface integrity improved.Fatigue behavior verification experiments were conducted,and parameter selection schemes for the collaborative improvement of the structure shape and surface integrity were discussed.For the holes of titanium alloy TB6(Ti-10V-2Fe-3Al),the fatigue life can be increased by 162%when the BD,spindle speed,and feed rate were 0.20 mm,200 r/min,and 0.2 mm/r,respectively.
基金financially supported by the Natural Science Foundation of Zhejiang Province(No.LR22E010001)the National Natural Science Foundation of China(No.52073258)+1 种基金the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.RF-B2022006)the R&D Program of Zhejiang University of Technology(No.KYY-HX-20190730)
文摘Iron oxide nanoparticles(IONPs)with intrinsic peroxidase(POD)-mimic activity have gained significant attention as nanozymes.Reducing sizes of IONPs is the mostly applied strategy to boost their enzymatic activity due to their high specific surface areas.Herein,we synthesized a series of uniformly sized IONPs ranging from3.17 to 21.2 nm,and found that POD activity of IONPs is not monotone increased by reducing their sizes,with the optimal size of 7.82 nm rather than smaller sized 3.17 nm.The reason for this unnormal phenomenon is that electronic structure also had great influence on POD activity,especially at the ultrasmall size region.Since Fe^(2+)are with higher enzymatic activity than Fe^(3+),3.17 nm IONPs although have the largest specific surface area,are prone to be oxidized,which reduced their iron content and ratio of Fe^(2+)to Fe^(3+),and consequently decreased their POD activity.By intentionally oxidized 7.82 nm IONPs in air,POD activity was obviously reduced,illustrating electronic structure cannot be overlooked.At the larger sized region ranging from 7.82 to 21.2 nm,oxidation degree of IONPs is similar,and surface electronic structure had a negligible effect on POD activity,and therefore,POD activity is predominantly influenced by specific surface area.By using the optimized 7.82 nm IONPs,tumor growth was obviously inhibited,demonstrating their potential in cancer therapeutics.Our results reveal that the designing of nanozymes should comprehensively balance their influence of surface electronic structure and specific surface area.
基金Project(BK20241969)supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(51971249)supported by the National Natural Science Foundation of China。
文摘As cathode materials for alkali-ion batteries,sodium manganese oxides have been receiving considerable and continuous attention in recent decades.In this work,the structure and environment-dependent stability of NaMn_(2)O_(4) surface were studied based on the first principles calculations.The surface stability diagram of NaMn_(2)O_(4) involving various different terminations of(100),(110)and(111)surfaces was constructed,and the stability of these different terminations could be compared as a function of chemical environment.It is found that the(100)-MnO and(111)-ONa terminations are two more stable terminations under the investigated chemical conditions.And the surface energies of(110)surfaces are negative under the investigated chemical potential,hence,(110)surfaces are unstable.The surface energy of NaMn_(2)O_(4) as a function of O chemical potential is also investigated under constant Na chemical potential.The structure relaxation indicates that the surface rumpling and surface reconstruction can affect the electronic structure of the surface,thereby reducing surface energy and stabilizing the surface.Furthermore,the Wulff shape of NaMn_(2)O_(4) was also constructed based on Gibbs-Wulff theorem.
基金supported by the National Natural Science Foundation of China(Grant Nos.62471024 and 62301183)the Open Research Fund of Hanjiang Laboratory(KF2024001).
文摘Surface/underwater target classification is a key topic in marine information research.However,the complex underwater environment,coupled with the diversity of target types and their variable characteristics,presents significant challenges for classifier design.For shallow-water waveguides with a negative thermocline,a residual neural network(ResNet)model based on the sound field elevation structure is constructed.This model demonstrates robust classification performance even when facing low signal-to-noise ratios and environmental mismatches.Meanwhile,to address the reduced generalization ability caused by limited labeled acoustic data,an improved ResNet model based on unsupervised domain adaptation(“proposed UDA-ResNet”)is further constructed.This model incorporates data on simulated elevation structures of the sound field to augment the training process.Adversarial training is employed to extract domain-invariant features from simulated and trial data.These strategies help reduce the negative impact caused by domain differences.Experimental results demonstrate that the proposed method shows strong surface/underwater target classification ability under limited sample sizes,thus confirming its feasibility and effectiveness.
基金financially supported by the National Natural Science Foundation of China(No.61704006)Beijing Nova Programme Interdisciplinary Cooperation Project(No.Z191100001119013)+2 种基金the Scientific Research Project of Beijing Educational Committee(No.KM202111232015)the Supplementary and Supportive Project for Teachers at Beijing Information Science and Technology University(2019-2021)(No.5029011103)the Key Research and Cultivation Project at Beijing Information Science and Technology University。
文摘The wettability of materials used in the production of devices employed in various technological domains have attracted significant attentions.Therefore,it is important to design the surfaces of these materials such that they can provide the required surface free energy and simplify the interfacial structure.Herein,various Cu films with a highly controllable surface wettability and a wide range of contact angles ranging from 6°to 152°were fabricated,and the corresponding mechanism was discussed.A wide range of wettability was realized by controlling the surface structure of the Cu film.The nanogap structure of the vertical nanowire-array film led to a high surface free energy.Similarly,the oblique nanowirearray film increased the surface free energy;however,the surface free energy was dependent on the size of the nanowires rather than on the nanogaps owing to the crystallinity of the film.Additionally,cluster-nanowire-array films were designed to realize a wettability transition from hydrophilicity to hydrophobicity with a constant surface free energy.The Cu foam possessed a superhydrophilic surface owing to its high porosity,whereas the cluster-nanoparticle structure possessed a superhydrophobic surface.In addition,we noted that the structure-induced wettability played an important role in tuning the semiconductor and metal interfacial stress and simplifying the interfacial structure.Furthermore,the outstanding electrical conductivity of the Cu films indicates its promising potential as an electrode.The structure-induced wettability proposed in this study can be applied for a wide range of materials,particularly for films used for advanced applications.
基金supported by the National Key Research and Development Program of China under Grants No.2017YFA0701000,No.2018YFF01013001,and No.2020YFA0714001the Natural Science Foundation of China under Grants No.61988102,No.61921002,and No.62071108。
文摘The simulation mechanism of surface plasmon polaritons(SPPs)and localized surface plasmon(LSP)in different structures was studied,including the Au reflection grating(Au grating),Au substrate with dielectric ribbons grating(Au substrate grating),and pure electric conductor(PEC)substrate with Au ribbons grating(Au ribbons grating).And the characteristics of the Smith-Purcell radiation in these structures were presented.Simulation results show that SPPs are excited on the bottom surface of Au substrate grating grooves and LSP is stimulated on the upper surface both of Au ribbons grating grooves and Au grating grooves.Owing to the irreconcilable contradiction between optimizing the grating diffraction radiation efficiency and optimizing the SPPs excitation efficiency in the Au substrate grating,only 40-times enhancement of the radiation intensity was obtained by excited SPPs.However,the LSP enhanced structure overcomes the above problem and gains much better radiation enhancement ability,with about 200-times enhancement obtained in the Au ribbons grating and more than 500-times enhancement obtained in the Au grating.The results presented here provide a way of developing miniature,integratable,tunable,high-power-density radiation sources from visible light to ultraviolet rays at room temperature.
文摘Gallium nitride(GaN)has widespread applications in the semiconductor industry because of its desirable optoelectronic properties.The fabrication of surface structures on GaN thin films can effectively modify their optical and electrical properties,providing additional degrees of freedom for controlling GaN-based devices.Compared with lithography-based techniques,laser processing is maskless and much more efficient.This paper shows how surface micronano structures can be produced on GaN thin films using 355 nm nanosecond laser irradiation.The effects of the laser pulse energy,number of pulses,and polarization direction were studied.It was found that distinct micro-nano structures were formed under different irradiation conditions,and their geometries and elemental compositions were analyzed.The results indicate that different types of surface micro-nano structures can be produced on GaN thin films in a controllable manner using 355 nm nanosecond laser irradiation.The results of our study provide valuable guidance for the surface modification of GaN-based optoelectronic devices.
文摘An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.
基金State Natural Scientific Foundation (49734150) and National High Performance Computation Foundation.
文摘We assembled approximately 328 seismic records. The data set was from 4 digitally recording long-period and broadband stations of CDSN. We carried out the inversion based on the partitioned waveform inversion (PWI). It partitions the large-scale optimization problem into a number of independent small-scale problems. We adopted surface waveform inversion with an equal block (2((2() discretization in order to acquire the images of shear velocity structure at different depths (from surface to 430 km) in the crust and upper-mantle. The resolution of all these anomalies has been established with (check-board( resolution tests. These results show significant difference in velocity, lithosphere and asthenosphere structure between South China Sea and its adjacent regions.
文摘This paper discusses the coloration process on the stainless steel and the properties of the film. The compositions, morphology and structure of colored films on stainless steel are studied by using SEM,AES,AFM,STM. The diffusion controlled mechanisms of films and calculation formula of surface electropotential difference are discussed.
基金supported by the National Key R&D Program of China(2022YFB3803501)the National Natural Science Foundation of China(22179008,22209156)+5 种基金support from the Beijing Nova Program(20230484241)support from the China Postdoctoral Science Foundation(2024M754084)the Postdoctoral Fellowship Program of CPSF(GZB20230931)support from beamline BL08U1A of Shanghai Synchrotron Radiation Facility(2024-SSRF-PT-506950)beamline 1W1B of the Beijing Synchrotron Radiation Facility(2021-BEPC-PT-006276)support from Initial Energy Science&Technology Co.,Ltd(IEST)。
文摘The implementation of ultrahigh-Ni cathodes in high-energy lithium-ion batteries(LIBs)is constrained by significant structural and interfacial degradation during cycling.In this study,doping-induced surface restructuring in ultrahigh-nickel cathode materials is rapidly facilitated through an ultrafast Joule heating method.Density functional theory(DFT)calculations,synchrotron X-ray absorption spectroscopy(XAS),and single-particle force test confirmed the establishment of a stable crystal framework and lattice oxygen,which mitigated H2-H3 phase transitions and improved structural reversibility.Additionally,the Sc doping process exhibits a pinning effect on the grain boundaries,as shown by scanning transmission electron microscopy(STEM),enhancing Li~+diffusion kinetics and decreasing mechanical strain during cycling.The in situ development of a cation-mixing layer at grain boundaries also creates a robust cathode/electrolyte interphase,effectively reducing interfacial parasitic reactions and transition metal dissolution,as validated by STEM and time-of-flight secondary ion mass spectrometry(TOF-SIMS).These synergistic modifications reduce particle cracking and surface/interface degradation,leading to enhanced rate capability,structural integrity,and thermal stability.Consequently,the optimized Sc-modified ultrahigh-Ni cathode(Sc-1)exhibits 93.99%capacity retention after 100 cycles at 1 C(25℃)and87.06%capacity retention after 100 cycles at 1 C(50℃),indicating excellent cycling and thermal stability.By presenting a one-step multifunctional modification approach,this research delivers an extensive analysis of the mechanisms governing the structure,microstructure,and interface properties of nickel-rich layered cathode materials(NCMs).These results underscore the potential of ultrahigh-Ni cathodes as viable candidates for advanced lithium-ion batteries(LIBs)in next-generation electric vehicles(EVs).
基金supported by the National Natural Science Foundation of China (U1609209)National Natural Science Foundation of China (61605162)+2 种基金NSFC-Liaoning Province united foundation (U1608259)National Natural Science Foundation of China (51501219)the financial support from the China Scholarship Council
文摘Paint removal from steel structure is executed for shipyards of marine and offshore engineering.Due to environmental unfriendliness and unhealthy drawbacks of sand blasting technique, laser ablation technique is proposed as a substituting method.By absorbing high energy of the 1064 nm pulsed laser, the paint is vaporized quickly.The ablated debris is then collected by using a suction pump.Initial metal surface of the steel is exposed when laser beam irradiates perpendicularly and scans over it.The cleaned surface fulfills the requirements of surface preparation standards ISO 8501 of SA2.The adhesion is further characterized with pull-off test after carrying out painting with Jotamastic 87 aluminum paint.The repainting can be embedded onto the laser cleaned surface to bond much more tightly.The excellent adhesion strength of 20 MPa between repainted coating and the substrate is achieved, which is higher than what is required by shipyards applications.
基金supported financially by the National Natural Science Foundation of China(No.51771155)the Equipment Pre-research Field Foundation(No.61409220202).
文摘In this work,ultrasonic surface rolling process(USRP)was utilized to produce a gradient structured layer on 7 B50-T7751 aluminum alloy,and the mechanical properties and corrosion fatigue behavior of treated samples were studied.These results reveal that underwent USRP,a 425~m thick gradient structure and a 700~m deep compressive residual stress field are created,aluminum grain size become fine(~67 nm),and the corrosion rate of treated surface reduces by 60.08%owing to the combined effect of compressive residual stress and surface nanocrystallization.The corrosion fatigue strength is enhanced to 117%of that of 7 B50 Al alloys by means of USRP due to the introduced compressive residual stress,which is considered as the major favorable factor in suppressing the initiation and early propagation of corrosion fatigue cracks.Besides,the gradient structure is an important factor in providing a significant synergistic contribution to the improvement of corrosion fatigue performance.
基金funded by the National Natural Science Foundation of China(Grant No.52276047)the Open Fund of NationalKey Laboratory of SpacecraftThermal Control(Grant No.NKLST-JJ-202401011)the Beijing Municipal Science&Technology Commission(Grant No.Z231100006123010).
文摘Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.
文摘The characteristics of surface maneuver targets are analyzed and a 3-D relative motion model for missiles and targets is established. A variable structure guidance law is designed considering the characteristics of targets. In the guidance law, the distance between missiles and targets as well as the missile-target relative velocity are all substituted by estimation values. The estimation errors, the target＇s velocity, and the maneuver acceleration are all treated as bounded disturbance. The guidance law proposed can be implemented conveniently in engineering with little target information. The performance of the guidance system is analyzed theoretically and the numerical simulation result shows the effectiveness of the guidance law.
