The development of optoelectronic technologies demands photodetectors with miniaturization,broadband operation,high sensitivity,and low power consumption.Although 2D van der Waals(vd W)heterostructures are promising c...The development of optoelectronic technologies demands photodetectors with miniaturization,broadband operation,high sensitivity,and low power consumption.Although 2D van der Waals(vd W)heterostructures are promising candidates due to their built-in electric fields,ultrafast photocarrier separation,and tunable bandgaps,defect states limit their performance.Therefore,the modulation of the optoelectronic properties in such heterostructures is imperative.Surface charge transfer doping(SCTD)has emerged as a promising strategy for non-destructive modulation of electronic and optoelectronic characteristics in two-dimensional materials.In this work,we demonstrate the construction of high-performance p-i-n vertical heterojunction photodetectors through SCTD of MoTe_(2)/ReS_(2)heterostructure using p-type F_(4)-TCNQ.Systematic characterization reveals that the interfacial doping process effectively amplifies the built-in electric field,enhancing photogenerated carrier separation efficiency.Compared to the pristine heterojunction device,the doped photodetector exhibits remarkable visible to nearinfrared(635-1064 nm)performance.Particularly under 1064 nm illumination at zero bias,the device achieves a responsivity of 2.86 A/W and specific detectivity of 1.41×10^(12)Jones.Notably,the external quantum efficiency reaches an exceptional value of 334%compared to the initial 11.5%,while maintaining ultrafast response characteristics with rise/fall times of 11.6/15.6μs.This work provides new insights into interface engineering through molecular doping for developing high-performance vd W optoelectronic devices.展开更多
The built-in electric field(BIEF)aroused by the variation in charge distribution between the surface and bulk phase of carbon nitride can improve carrier dynamics.Herein,phosphorus(P)and benzene ringdoped C_(3)N_(5)na...The built-in electric field(BIEF)aroused by the variation in charge distribution between the surface and bulk phase of carbon nitride can improve carrier dynamics.Herein,phosphorus(P)and benzene ringdoped C_(3)N_(5)nanosheets(PPCN_(2))were synthesized by a facile method and demonstrated excellent performance in the photocatalytic degradation of antibiotics.Benzene ring replaced the triazine part of the heptazine unit,expanding the π-conjugated structure of the system,promoting electron delocalization,and enhancing the light-absorbing property.P doping led to the creation of an additional donor state within the P 2p band,facilitating the charge separation and lengthening the transport distance of electron-hole pairs.Additionally,the intermediate state gap created in the Urbach tail further strengthened photon absorption and improved effective electron capture.XPS with Ar ion etching at different depths verified the significant potential difference and large dipole moment caused by different doping levels of surface and bulk phase,resulting in a strong BIEF inside the PPCN_(2).KPFM,SPV,and DFT calculations confirmed the strong BIEF in PPCN_(2).EPR,rotating disk electrode(RRDE)and in situ infrared drift(DRIFT)spectroscopy confirmed the reactive oxygen species and the two-step one-electron reduction reaction mechanism during the photodegradation process.This work provides a new perspective for the study of improving the photocatalytic performance of C_(3)N_(5)by inducing the BIEF which arose from the differences in electronic structure and charge distribution on the surface and bulk phase caused by molecular doping.展开更多
Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties durin...Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties during recognition reaction process,which is closely related to their ICT characteristics.1,8-Naphthalimide is known as a typical fluorophore with desirable ICT property when functionalized with an electron-donating moiety at the para-position of the naphthalene chromophore.Although the photophysical properties of para-substituted 1,8-naphthalimide have been well studied,its meta-substituted counterpart has not been fully evaluated since the meta-position is conventionally thought to be weakly conjugated.Herein,combined experimental and theoretical studies are performed which consistently indicate that stronger charge transfer(CT) is exhibited by the meta-amino substituted 1,8-naphthalimide(m-NH_(2)) compared to the para-amino substituted one(p-NH_(2)).The ratiometric response of fluorescence with significant changes in wavelength and intensity upon acetylation(m-NAc and p-NAc) can be attributed to the larger ICT and stronger-NH_(2) vibrations.This observation is further demonstrated by deuterium oxide experiments,viscosity experiments and quantum chemical calculations.The practical application of meta-amino-1,8-naphthalimide ICT-based probes is also confirmed.This research is expected to bring an in-depth understanding of π-conjugated systems with ICT characteristics,and facilitates the design of sensitive ICT fluorescent probes with meta-amino substitution.展开更多
Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was d...Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.展开更多
Oxygen vacancies(Ov)within metal oxide electrodes can enhance mass/charge transfer dynamics in energy storage systems.However,construction of surface Ovoften leads to instability in electrode structure and irreversibl...Oxygen vacancies(Ov)within metal oxide electrodes can enhance mass/charge transfer dynamics in energy storage systems.However,construction of surface Ovoften leads to instability in electrode structure and irreversible electrochemical reactions,posing a significant challenge.To overcome these challenges,atomic heterostructures are employed to address the structural instability and enhance the mass/charge transfer dynamics associated with phase conversion mechanism in aqueous electrodes,Herein,we introduce an atomic S-Bi_(2)O_(3)heterostructure(sulfur(S)anchoring on the surface Ovof Bi_(2)O_(3)).The integration of S within Bi_(2)O_(3)lattice matrix triggers a charge imbala nce at the heterointerfaces,ultimately resulting in the creation of a built-in electric field(BEF).Thus,the BEF attracts OH-ions to be adsorbed onto Bi within the regions of high electron cloud overlap in S-Bi_(2)O_(3),facilitating highly efficient charge transfer.Furthermore,the anchored S plays a pivotal role in preserving structural integrity,thus effectively stabilizing the phase conversion reaction of Bi_(2)O_(3).As a result,the S-Bi_(2)O_(3)electrode achieves72.3 mA h g^(-1)at 10 A g^(-1)as well as high-capacity retention of 81.9%after 1600 cycles.Our innovative SBi_(2)O_(3)design presents a groundbreaking approach for fabricating electrodes that exhibit efficient and stable mass and charge transfer capabilities.Furthermore,it enhances our understanding of the underlying reaction mechanism within energy storage electrodes.展开更多
Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellen...Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.展开更多
Undesired ice accumulation on infrastructure and transportation systems leads to catastrophic events and significant economic losses.Although various anti-icing surfaces with photothermal effects can initially prevent...Undesired ice accumulation on infrastructure and transportation systems leads to catastrophic events and significant economic losses.Although various anti-icing surfaces with photothermal effects can initially prevent icing,any thawy droplets remaining on the horizontal surface can quickly re-freezing once the light diminishes.To address these challenges,we have developed a self-draining slippery surface(SDSS)that enables the thawy droplets to self-remove on the horizontal surface,thereby facilitating real-time anti-icing with the aid of sunlight(100 m W cm^(-2)).This is achieved by sandwiching a thin pyroelectric layer between slippery surface and photothermal film.Due to the synergy between the photothermal and pyroelectric layers,the SDSS not only maintains a high surface temperature of 19.8±2.2℃at the low temperature(-20.0±1.0℃),but also generates amount of charge through thermoelectric coupling.Thus,as cold droplets dropped on the SDSS,electrostatic force pushes the droplets off the charged surface because of the charge transfer mechanism.Even if the surface freezes overnight,the ice can melt and drain off the SDSS within 10 min of exposure to sunlight at-20.0±1.0℃,leaving a clean surface.This work provides a new perspective on the anti-icing system in the real-world environments.展开更多
As a popular approach to producing atmospheric pressure non-thermal plasma,dielectric barrier discharge(DBD)has been extensively used in various application fields.In this paper,DBD with wavy dielectric layers is nume...As a popular approach to producing atmospheric pressure non-thermal plasma,dielectric barrier discharge(DBD)has been extensively used in various application fields.In this paper,DBD with wavy dielectric layers is numerically simulated in atmospheric pressure helium mixed with trace nitrogen based on a fluid model.With varying relative position(phase difference(Δφ))of the wavy surfaces,there is a positive discharge and a negative discharge per voltage cycle,each of which consists of a pulse stage and a hump stage.For the pulse stage,maximal current increases with increasingΔφ.Results show that DBD with the wavy surfaces appears as discrete micro-discharges(MDs),which are self-organized to different patterns with varyingΔφ.The MDs are vertical and uniformly-spaced withΔφ=0,which are self-organized in pairs withΔφ=π/4.These MD pairs are merged into some bright wide MDs withΔφ=π/2.In addition,narrow MDs appear between tilted wide MDs withΔφ=3π/4.WithΔφ=π,the pattern is composed of wide and narrow MDs,which are vertical and appear alternately.To elucidate the formation mechanism of the patterns with differentΔφ,temporal evolutions of electron density and electric field are investigated for the positive discharge.Moreover,surface charge on the wavy dielectric layers has also been compared with differentΔφ.展开更多
Polymer microfluidic chips are a common tool in biomedical research,and the production of mold inserts with microscale structures represents a crucial step in the precise molding of these chips.Electrical discharge ma...Polymer microfluidic chips are a common tool in biomedical research,and the production of mold inserts with microscale structures represents a crucial step in the precise molding of these chips.Electrical discharge machining(EDM)can achieve high-quality machining of microstructures on high-hardness mold steel inserts.This can reduce the manufacturing cost of microfluidic chip molds and extend the service life of molds.However,the EDM process is susceptible to the formation of poor-quality surfaces due to the occurrence of abnormal discharges.To address this issue,this paper presents in-depth research on a novel ultrasonic cavitation-assisted electrical discharge machining method.An ultrasonic transducer is placed in an electrical discharge working fluid to promote the removal of electrical corrosion products through the cavitation effect of the liquid.This can also reduce the occurrence of poor discharge,thereby improving the machining surface quality.The aluminum foil corrosion method is employed to investigate the distribution of ultrasonic action in the electric discharge working fluid.The attenuation law of ultrasonic action in the electric discharge working fluid is also investigated.The range of ultrasonic action is determined,providing a reference for subsequent ultrasonic vibration electric discharge working fluid processing experiments.The results of the aluminum foil tests are used to inform the selection of NAK80 mold steel as the experimental object.The effects of cavitation at three ultrasonic frequencies on the surface microstructure are investigated.The experimental results indicate that ultrasonic cavitation can facilitate the movement of corrosion products in electrical machining,reduce the occurrence of abnormal discharges caused by carbon deposition or the secondary re-melting of metals,and thereby enhance the machining surface quality.展开更多
Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for ca...Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for catalyst design and performance improvement in these applications.In this work,we systematically investigate the HPOR/HPRR mechanisms on low-index Pt surfaces,specifically Pt(111),Pt(100)and Pt(110),through density functional theory(DFT)calculations combined with the computational hydrogen electrode(CHE)model.For HPOR,all the low-index Pt surfaces exhibit a unified potential-determining step(PDS)involving the electrochemical oxidation of hydroperoxyl intermediates(HOO*).The binding free energy of HOO*(Δ_(GHOO*))emerges as an activity descriptor,with Pt(110)exhibiting the highest HPOR activity.The HPRR mechanism follows a chem-electrochemical(C-EC)pathway.The rate-determining step(RDS)of HPRR is either the cleavage of the HO-OH bond(chemical)or the reduction of HO(electrochemical),depending on their respective activation energies.These activation energies are functions of the HO*binding free energy,Δ_(GHO*),establishingΔ_(GHO*)as the descriptor for HPRR activity prediction.Pt(111)and Pt(100)are identified as the most active HPRR catalysts among the studied metal surfaces,although they still experience a significant overpotential.The scaling relationship betweenΔ_(GHOO*)andΔ_(GHO*)reveals a thermodynamic coupling of HPOR and HPRR,explaining their occurrence on Pt surfaces.These findings provide important insights and activity descriptors for both HPOR and HPRR,providing valuable guidance for the design of electrocatalysts in H_(2)O_(2)-related energy applications and fuel cells.展开更多
Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintaining their key advantages such as comfort,softness and stretchability.Herein,an atmospheric pressure die...Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintaining their key advantages such as comfort,softness and stretchability.Herein,an atmospheric pressure dielectric barrier discharge(DBD)plasma method is demonstrated for the processing of silk fabrics using 1H,1H,2H,2H-perfluorodecyltriethoxysilane(PFDS)as the precursor.The results showed the successful grafting of PFDS groups onto the surface of silk fabrics without causing damage.Meanwhile,the gas temperature is rather low during the whole processing procedure,suggesting the non-equilibrium characteristics of DBD plasma.The influence on fabrics of the processing parameters(PFDS concentration,plasma treatment time and plasma discharge power)was systematically investigated.An optimum processing condition was determined to be a PFDS concentration of 8wt%,a plasma processing time of 40 s and a plasma power of 11.87 W.However,with prolonged plasma processing time or enhanced plasma power,the plasma-grafted PFDS films could be degraded.Further study revealed that plasma processing of silk fabrics with PFDS would lead to a change in their chemical composition and surface roughness.As a result,the surface energy of the fabrics was reduced,accompanied by improved water and oil repellency as well as enhanced antifouling performance.Besides,the plasma-grafted PFDS films also had good durability and stability.By extending the method to polyester and wool against different oil-/water-based stains,the DBD plasma surface modification technique demonstrated good versatility in improving the antifouling properties of fabrics.This work provides guidance for the surface modification of fabrics using DBD plasma to confer them with desirable functionalities.展开更多
Rechargeable aqueous zinc-ion batteries(AZIBs)exhibit appreciable potential in the domain of electrochemical energy storage.However,there are serious challenges for AZIBs,for instance zinc dendrite growth,hydrogen evo...Rechargeable aqueous zinc-ion batteries(AZIBs)exhibit appreciable potential in the domain of electrochemical energy storage.However,there are serious challenges for AZIBs,for instance zinc dendrite growth,hydrogen evolution reaction(HER),and corrosion side reactions.Herein,we propose a surface engineering modification strategy for coating the montmorillonite(MMT)layer onto the surface of the Zn anode to tackle these issues,thereby achieving high cycling stability for rechargeable AZIBs.The results reveal that the MMT layer on the surface of the Zn anode is able to provide ordered zincophilic channels for zinc ions migration,facilitating the reaction kinetics of zinc ions.Density functional theory(DFT)calculations and water contact angle(CA)tests prove that MMT@Zn anode exhibits superior adsorption capacity for Zn^(2+)and better hydrophobicity than the bare Zn anode,thereby achieving excellent cycling stability.Moreover,the MMT@Zn||MMT@Zn symmetric cell holds the stable cycling over 5600 h at 0.5 mA cm^(-2)and 0.125 m A h cm^(-2),even exceeding 1800 h long cycling under harsh conditions of 5 m A cm^(-2)and 1.25 m A h cm^(-2).The MMT@Zn||V_(2)O_(5)full cell reaches over 3000 cycles at 2 A g^(-1)with excellent rate capability.Therefore,this surface engineering modification strategy for enhancing the electrochemical performance of AZIBs represents a promising application.展开更多
This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by th...This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by the patterns found on marine shells.The impacts of the parameters on wettability,Surface Free Energy(SFE),surface topography,and texture roughness generated by the laser beam tracking a spiral path were investigated.Reducing spiral pitch produces more complicated and chaotic surface patterns.Most surfaces are hydrophobic,and surface roughness and topography influence the Contact Angle(CA).Topography and roughness were affected by frequency and scanning speed;a decrease in scanning speed and frequency generated more chaotic and irregular surface textures.With general factorial analysis and Analysis of Variance(ANOVA),our statistical study reveals that accounting for 88%of the influence,the scanning speed is the primary factor influencing surface roughness.On the other hand,the spiral pitch is essential for defining the struc-tural features of the surface,even if it less influences roughness.The SFE of laser-textured CoCr28Mo alloy specimens was optimizable within the range of 14-32 mN/m.The relevant findings offer valuable insights into optimizing LST for the specific surface properties of the Co-based alloy.展开更多
This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experi...This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experiments were conducted in a constant-temperature bath at a cold surface temperature of–5℃,relative humidity of 90%,and ambient air temperature of 10℃.The results reveal that the variation trends of frost morphology,frost mass,and frost layer thickness are generally consistent across surfaces with different wettability.Among the tested surfaces,frost crystal formation and complete surface coverage occurred latest on the superhydrophobic surface(CA=153.9–165.8℃),next on the bare aluminumsurface(75.3–83.2℃),and earliest on the hydrophilic surface(5.3–7.5℃).At the same frosting duration,the superhydrophobic surface exhibited a sparse and fluffy frost layer,the bare aluminum surface formed a rough and dense frost,while the hydrophilic surface developed a fine and compact frost layer.The amount of frost formation decreased in the order of hydrophilic>bare aluminum>superhydrophobic,indicating that the superhydrophobic surface provides the most significant anti-frosting effect during the initial stages of frost formation.For instance,on the Type A corrugated structure,after 15 min of frosting,the frost mass on the superhydrophobic surface was 38.78%and 68.45%lower than those on the bare aluminum and hydrophilic surfaces,respectively.After 30 min,these differences were 4.99%and 25.26%,respectively.Overall,the superhydrophobic surface exhibited the smallest frost mass and frost layer thickness,demonstrating superior anti-frosting performance compared with the other surface types.展开更多
In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been d...Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.展开更多
The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has att...The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.展开更多
To advance the theoretical understanding,technological development,and field application of electric charge induction for monitoring rock deformation and failure,this study investigates the induced electric charge gen...To advance the theoretical understanding,technological development,and field application of electric charge induction for monitoring rock deformation and failure,this study investigates the induced electric charge generated during the deformation and failure of igneous rocks.The charge originates mainly from a combination of electrical polarization and triboelectric effects.Through laboratory experiments,we analyzed the time-frequency evolution of induced electric charge signals and identified relevant monitoring parameters.An online downhole electric charge induction monitoring system was developed and validated in the field.Experimental results show that the dominant frequency range of induced electric charge signals generated during igneous rock deformation and failure lies between 0 and 23 Hz,and a low-pass finite impulse response(FIR)filter effectively suppresses noise.Optimal sensor distances for monitoring cubic and cylindrical specimens were determined to be 17 mm and 13 mm,respectively.We proposed early warning indicators,including the maximum absolute value of the induced electric charge,the arithmetic mean value,the distribution dispersion coefficient,and the cumulative sum value.In field application,time-domain curves and spatial distribution charts of these warning indicators correspond well with changes in abutment stress ahead of the mining face,offering indirect insights into local stress evolution.This research provides technical and equipment support for the application of electric charge induction technology to monitoring and early warning of coal bursts.展开更多
To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals ...To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.展开更多
The severe shuttle effect and sluggish reaction kinetics in room-temperature sodium-sulfur(RT Na-S)batteries have been major bottlenecks hindering their practical application.To overcome these challenges,a straightfor...The severe shuttle effect and sluggish reaction kinetics in room-temperature sodium-sulfur(RT Na-S)batteries have been major bottlenecks hindering their practical application.To overcome these challenges,a straightforward reduction approach was employed to design three bimetallic alloy nanoparticles(FeNi,FeCo,and NiCo)supported on multistage porous carbon substrates.Experimental and theoretical calculations reveal that the charge transfer within the alloy catalyst influences the position of its d-band center and its degree of hybridization with sodium polysulfides(NaPSs).An increased charge transfer leads to a shift of the alloy’s d-band center closer to the Fermi energy level,thereby enhancing its adsorption and catalytic capabilities.Among the three alloy compositions,the FeNi alloy exhibits the highest charge transfer.Consequently,the FeNi alloy demonstrates the superior electrochemical performance,achieving a high reversible specific capacity of 848.2 mA h g^(−1),with an average capacity degradation rate of only 0.037%per cycle over 1000 cycles at 1.2 C.The S/FeNi/NC cathode exhibits a low electrolyte-to-sulfur(E/S)ratio of 6.6µL mg^(−1),while maintaining a high reversible specific capacity of 568.1 mA h g^(−1).This offers valuable insights for the application of alloy catalysts in the S/FeNi/NC cathode of RT Na-S batteries.展开更多
基金financial support from 2024 Domestic Visiting Scholar Program for Teachers'Professional Development in Universities(Grant No.FX2024022)National Natural Science Foundation of China(Grant No.61904043)。
文摘The development of optoelectronic technologies demands photodetectors with miniaturization,broadband operation,high sensitivity,and low power consumption.Although 2D van der Waals(vd W)heterostructures are promising candidates due to their built-in electric fields,ultrafast photocarrier separation,and tunable bandgaps,defect states limit their performance.Therefore,the modulation of the optoelectronic properties in such heterostructures is imperative.Surface charge transfer doping(SCTD)has emerged as a promising strategy for non-destructive modulation of electronic and optoelectronic characteristics in two-dimensional materials.In this work,we demonstrate the construction of high-performance p-i-n vertical heterojunction photodetectors through SCTD of MoTe_(2)/ReS_(2)heterostructure using p-type F_(4)-TCNQ.Systematic characterization reveals that the interfacial doping process effectively amplifies the built-in electric field,enhancing photogenerated carrier separation efficiency.Compared to the pristine heterojunction device,the doped photodetector exhibits remarkable visible to nearinfrared(635-1064 nm)performance.Particularly under 1064 nm illumination at zero bias,the device achieves a responsivity of 2.86 A/W and specific detectivity of 1.41×10^(12)Jones.Notably,the external quantum efficiency reaches an exceptional value of 334%compared to the initial 11.5%,while maintaining ultrafast response characteristics with rise/fall times of 11.6/15.6μs.This work provides new insights into interface engineering through molecular doping for developing high-performance vd W optoelectronic devices.
基金financially supported by the Science and Technology Commission of Shanghai Municipality(No.23HC1400302)the National Natural Science Foundation of China(Nos.22162021 and 21862013)the Natural Science Foundation of Ningxia Province(Nos.2021AAC03057 and 2023AAC03015).
文摘The built-in electric field(BIEF)aroused by the variation in charge distribution between the surface and bulk phase of carbon nitride can improve carrier dynamics.Herein,phosphorus(P)and benzene ringdoped C_(3)N_(5)nanosheets(PPCN_(2))were synthesized by a facile method and demonstrated excellent performance in the photocatalytic degradation of antibiotics.Benzene ring replaced the triazine part of the heptazine unit,expanding the π-conjugated structure of the system,promoting electron delocalization,and enhancing the light-absorbing property.P doping led to the creation of an additional donor state within the P 2p band,facilitating the charge separation and lengthening the transport distance of electron-hole pairs.Additionally,the intermediate state gap created in the Urbach tail further strengthened photon absorption and improved effective electron capture.XPS with Ar ion etching at different depths verified the significant potential difference and large dipole moment caused by different doping levels of surface and bulk phase,resulting in a strong BIEF inside the PPCN_(2).KPFM,SPV,and DFT calculations confirmed the strong BIEF in PPCN_(2).EPR,rotating disk electrode(RRDE)and in situ infrared drift(DRIFT)spectroscopy confirmed the reactive oxygen species and the two-step one-electron reduction reaction mechanism during the photodegradation process.This work provides a new perspective for the study of improving the photocatalytic performance of C_(3)N_(5)by inducing the BIEF which arose from the differences in electronic structure and charge distribution on the surface and bulk phase caused by molecular doping.
基金financially supported by National Key Research and Development Programs (Nos.2022YFD1700403 and 2023YFD1700303)National Natural Science Foundation of China (Nos.12274128 and 12250003)+2 种基金Shanghai Rising-Star Program (No.21QA1402600)the support of NYU-ECNU Center for Computational Chemistry at NYU Shanghaithe University of Bath and the Open Research Fund of the School of Chemistry and Chemical Engineering,Henan Normal University (No.2020ZD01) for support。
文摘Fluorescent probes based on intramolecular charge transfer(ICT) have obvious advantages for accurate quantitative analysis.To obtain high-performance ratiometric probes requires distinct photophysical properties during recognition reaction process,which is closely related to their ICT characteristics.1,8-Naphthalimide is known as a typical fluorophore with desirable ICT property when functionalized with an electron-donating moiety at the para-position of the naphthalene chromophore.Although the photophysical properties of para-substituted 1,8-naphthalimide have been well studied,its meta-substituted counterpart has not been fully evaluated since the meta-position is conventionally thought to be weakly conjugated.Herein,combined experimental and theoretical studies are performed which consistently indicate that stronger charge transfer(CT) is exhibited by the meta-amino substituted 1,8-naphthalimide(m-NH_(2)) compared to the para-amino substituted one(p-NH_(2)).The ratiometric response of fluorescence with significant changes in wavelength and intensity upon acetylation(m-NAc and p-NAc) can be attributed to the larger ICT and stronger-NH_(2) vibrations.This observation is further demonstrated by deuterium oxide experiments,viscosity experiments and quantum chemical calculations.The practical application of meta-amino-1,8-naphthalimide ICT-based probes is also confirmed.This research is expected to bring an in-depth understanding of π-conjugated systems with ICT characteristics,and facilitates the design of sensitive ICT fluorescent probes with meta-amino substitution.
基金supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province (No. 1003016001)。
文摘Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.
基金supported by the Research Program of Jilin Province Development and Reform Commission(2024C018-6).
文摘Oxygen vacancies(Ov)within metal oxide electrodes can enhance mass/charge transfer dynamics in energy storage systems.However,construction of surface Ovoften leads to instability in electrode structure and irreversible electrochemical reactions,posing a significant challenge.To overcome these challenges,atomic heterostructures are employed to address the structural instability and enhance the mass/charge transfer dynamics associated with phase conversion mechanism in aqueous electrodes,Herein,we introduce an atomic S-Bi_(2)O_(3)heterostructure(sulfur(S)anchoring on the surface Ovof Bi_(2)O_(3)).The integration of S within Bi_(2)O_(3)lattice matrix triggers a charge imbala nce at the heterointerfaces,ultimately resulting in the creation of a built-in electric field(BEF).Thus,the BEF attracts OH-ions to be adsorbed onto Bi within the regions of high electron cloud overlap in S-Bi_(2)O_(3),facilitating highly efficient charge transfer.Furthermore,the anchored S plays a pivotal role in preserving structural integrity,thus effectively stabilizing the phase conversion reaction of Bi_(2)O_(3).As a result,the S-Bi_(2)O_(3)electrode achieves72.3 mA h g^(-1)at 10 A g^(-1)as well as high-capacity retention of 81.9%after 1600 cycles.Our innovative SBi_(2)O_(3)design presents a groundbreaking approach for fabricating electrodes that exhibit efficient and stable mass and charge transfer capabilities.Furthermore,it enhances our understanding of the underlying reaction mechanism within energy storage electrodes.
文摘Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.
基金supported by the National Natural Science Foundation of China(52273101,51922018,and 21875011)the Fundamental Research Funds for the Central Universities(KG21015201 and KG21020801)China Postdoctoral Science Foundation(2025M77422)。
文摘Undesired ice accumulation on infrastructure and transportation systems leads to catastrophic events and significant economic losses.Although various anti-icing surfaces with photothermal effects can initially prevent icing,any thawy droplets remaining on the horizontal surface can quickly re-freezing once the light diminishes.To address these challenges,we have developed a self-draining slippery surface(SDSS)that enables the thawy droplets to self-remove on the horizontal surface,thereby facilitating real-time anti-icing with the aid of sunlight(100 m W cm^(-2)).This is achieved by sandwiching a thin pyroelectric layer between slippery surface and photothermal film.Due to the synergy between the photothermal and pyroelectric layers,the SDSS not only maintains a high surface temperature of 19.8±2.2℃at the low temperature(-20.0±1.0℃),but also generates amount of charge through thermoelectric coupling.Thus,as cold droplets dropped on the SDSS,electrostatic force pushes the droplets off the charged surface because of the charge transfer mechanism.Even if the surface freezes overnight,the ice can melt and drain off the SDSS within 10 min of exposure to sunlight at-20.0±1.0℃,leaving a clean surface.This work provides a new perspective on the anti-icing system in the real-world environments.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12375250,11875121,51977057,11805013)the Natural Science Foundation of Hebei Province,China(Grant Nos.A2020201025 and A2022201036)+3 种基金the Hebei Province Optoelectronic Information Materials Laboratory Performance Subsidy Fund Project(Grant No.22567634H)the Funds for Distinguished Young Scientists of Hebei Province,China(Grant No.A2012201045)the Natural Science Interdisciplinary Research Program of Hebei University(Grant Nos.DXK201908 and DXK202011)the Post-graduate’s Innovation Fund Project of Hebei University(Grant No.HBU2022bs004)。
文摘As a popular approach to producing atmospheric pressure non-thermal plasma,dielectric barrier discharge(DBD)has been extensively used in various application fields.In this paper,DBD with wavy dielectric layers is numerically simulated in atmospheric pressure helium mixed with trace nitrogen based on a fluid model.With varying relative position(phase difference(Δφ))of the wavy surfaces,there is a positive discharge and a negative discharge per voltage cycle,each of which consists of a pulse stage and a hump stage.For the pulse stage,maximal current increases with increasingΔφ.Results show that DBD with the wavy surfaces appears as discrete micro-discharges(MDs),which are self-organized to different patterns with varyingΔφ.The MDs are vertical and uniformly-spaced withΔφ=0,which are self-organized in pairs withΔφ=π/4.These MD pairs are merged into some bright wide MDs withΔφ=π/2.In addition,narrow MDs appear between tilted wide MDs withΔφ=3π/4.WithΔφ=π,the pattern is composed of wide and narrow MDs,which are vertical and appear alternately.To elucidate the formation mechanism of the patterns with differentΔφ,temporal evolutions of electron density and electric field are investigated for the positive discharge.Moreover,surface charge on the wavy dielectric layers has also been compared with differentΔφ.
基金supported by the Higher Education Science and Technology Innovation Project of Shanxi Province(No.2022L706)Natural Science Foundation of Jiangsu Province(No.BK20210755).
文摘Polymer microfluidic chips are a common tool in biomedical research,and the production of mold inserts with microscale structures represents a crucial step in the precise molding of these chips.Electrical discharge machining(EDM)can achieve high-quality machining of microstructures on high-hardness mold steel inserts.This can reduce the manufacturing cost of microfluidic chip molds and extend the service life of molds.However,the EDM process is susceptible to the formation of poor-quality surfaces due to the occurrence of abnormal discharges.To address this issue,this paper presents in-depth research on a novel ultrasonic cavitation-assisted electrical discharge machining method.An ultrasonic transducer is placed in an electrical discharge working fluid to promote the removal of electrical corrosion products through the cavitation effect of the liquid.This can also reduce the occurrence of poor discharge,thereby improving the machining surface quality.The aluminum foil corrosion method is employed to investigate the distribution of ultrasonic action in the electric discharge working fluid.The attenuation law of ultrasonic action in the electric discharge working fluid is also investigated.The range of ultrasonic action is determined,providing a reference for subsequent ultrasonic vibration electric discharge working fluid processing experiments.The results of the aluminum foil tests are used to inform the selection of NAK80 mold steel as the experimental object.The effects of cavitation at three ultrasonic frequencies on the surface microstructure are investigated.The experimental results indicate that ultrasonic cavitation can facilitate the movement of corrosion products in electrical machining,reduce the occurrence of abnormal discharges caused by carbon deposition or the secondary re-melting of metals,and thereby enhance the machining surface quality.
基金Supported by the Shanxi Province Grant(202203021212007,2023SHB003).
文摘Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for catalyst design and performance improvement in these applications.In this work,we systematically investigate the HPOR/HPRR mechanisms on low-index Pt surfaces,specifically Pt(111),Pt(100)and Pt(110),through density functional theory(DFT)calculations combined with the computational hydrogen electrode(CHE)model.For HPOR,all the low-index Pt surfaces exhibit a unified potential-determining step(PDS)involving the electrochemical oxidation of hydroperoxyl intermediates(HOO*).The binding free energy of HOO*(Δ_(GHOO*))emerges as an activity descriptor,with Pt(110)exhibiting the highest HPOR activity.The HPRR mechanism follows a chem-electrochemical(C-EC)pathway.The rate-determining step(RDS)of HPRR is either the cleavage of the HO-OH bond(chemical)or the reduction of HO(electrochemical),depending on their respective activation energies.These activation energies are functions of the HO*binding free energy,Δ_(GHO*),establishingΔ_(GHO*)as the descriptor for HPRR activity prediction.Pt(111)and Pt(100)are identified as the most active HPRR catalysts among the studied metal surfaces,although they still experience a significant overpotential.The scaling relationship betweenΔ_(GHOO*)andΔ_(GHO*)reveals a thermodynamic coupling of HPOR and HPRR,explaining their occurrence on Pt surfaces.These findings provide important insights and activity descriptors for both HPOR and HPRR,providing valuable guidance for the design of electrocatalysts in H_(2)O_(2)-related energy applications and fuel cells.
基金the financial support from National Natural Science Foundation of China(Nos.22078125 and 52004102)Postdoctoral Science Foundation of China(No.2023M741472)。
文摘Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintaining their key advantages such as comfort,softness and stretchability.Herein,an atmospheric pressure dielectric barrier discharge(DBD)plasma method is demonstrated for the processing of silk fabrics using 1H,1H,2H,2H-perfluorodecyltriethoxysilane(PFDS)as the precursor.The results showed the successful grafting of PFDS groups onto the surface of silk fabrics without causing damage.Meanwhile,the gas temperature is rather low during the whole processing procedure,suggesting the non-equilibrium characteristics of DBD plasma.The influence on fabrics of the processing parameters(PFDS concentration,plasma treatment time and plasma discharge power)was systematically investigated.An optimum processing condition was determined to be a PFDS concentration of 8wt%,a plasma processing time of 40 s and a plasma power of 11.87 W.However,with prolonged plasma processing time or enhanced plasma power,the plasma-grafted PFDS films could be degraded.Further study revealed that plasma processing of silk fabrics with PFDS would lead to a change in their chemical composition and surface roughness.As a result,the surface energy of the fabrics was reduced,accompanied by improved water and oil repellency as well as enhanced antifouling performance.Besides,the plasma-grafted PFDS films also had good durability and stability.By extending the method to polyester and wool against different oil-/water-based stains,the DBD plasma surface modification technique demonstrated good versatility in improving the antifouling properties of fabrics.This work provides guidance for the surface modification of fabrics using DBD plasma to confer them with desirable functionalities.
基金National Natural Science Foundation of China(Grant No.22005318,22379152)Western Young Scholars Foundations of Chinese Academy of Sciences+4 种基金Lanzhou Youth Science and Technology Talent Innovation Project(Grant No.2023-NQ-86,No.2023-QN-96)Lanzhou Chengguan District Science and Technology Plan Project(Grant No.2023-rc-4,2022-rc-4)Collaborative Innovation Alliance Fund for Young Science and Technology Worker(Grant No.HZJJ23-7)National Nature Science Foundations of Gansu Province(Grant No.21JR11RA020)Fundamental Research Funds for the Central Universities(Grant No.31920220073,31920230128)。
文摘Rechargeable aqueous zinc-ion batteries(AZIBs)exhibit appreciable potential in the domain of electrochemical energy storage.However,there are serious challenges for AZIBs,for instance zinc dendrite growth,hydrogen evolution reaction(HER),and corrosion side reactions.Herein,we propose a surface engineering modification strategy for coating the montmorillonite(MMT)layer onto the surface of the Zn anode to tackle these issues,thereby achieving high cycling stability for rechargeable AZIBs.The results reveal that the MMT layer on the surface of the Zn anode is able to provide ordered zincophilic channels for zinc ions migration,facilitating the reaction kinetics of zinc ions.Density functional theory(DFT)calculations and water contact angle(CA)tests prove that MMT@Zn anode exhibits superior adsorption capacity for Zn^(2+)and better hydrophobicity than the bare Zn anode,thereby achieving excellent cycling stability.Moreover,the MMT@Zn||MMT@Zn symmetric cell holds the stable cycling over 5600 h at 0.5 mA cm^(-2)and 0.125 m A h cm^(-2),even exceeding 1800 h long cycling under harsh conditions of 5 m A cm^(-2)and 1.25 m A h cm^(-2).The MMT@Zn||V_(2)O_(5)full cell reaches over 3000 cycles at 2 A g^(-1)with excellent rate capability.Therefore,this surface engineering modification strategy for enhancing the electrochemical performance of AZIBs represents a promising application.
基金the Scientific and Technological Research Council of Türkiye(TÜBiTAK).
文摘This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by the patterns found on marine shells.The impacts of the parameters on wettability,Surface Free Energy(SFE),surface topography,and texture roughness generated by the laser beam tracking a spiral path were investigated.Reducing spiral pitch produces more complicated and chaotic surface patterns.Most surfaces are hydrophobic,and surface roughness and topography influence the Contact Angle(CA).Topography and roughness were affected by frequency and scanning speed;a decrease in scanning speed and frequency generated more chaotic and irregular surface textures.With general factorial analysis and Analysis of Variance(ANOVA),our statistical study reveals that accounting for 88%of the influence,the scanning speed is the primary factor influencing surface roughness.On the other hand,the spiral pitch is essential for defining the struc-tural features of the surface,even if it less influences roughness.The SFE of laser-textured CoCr28Mo alloy specimens was optimizable within the range of 14-32 mN/m.The relevant findings offer valuable insights into optimizing LST for the specific surface properties of the Co-based alloy.
基金supported by the Science and Technology Research Project of Henan Province(No.232102241014)the Key scientific research project of Henan Province Colleges and Universities(No.22A470002)Doctoral Fund Project of Henan Polytechnic University(No.B2021-37).
文摘This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experiments were conducted in a constant-temperature bath at a cold surface temperature of–5℃,relative humidity of 90%,and ambient air temperature of 10℃.The results reveal that the variation trends of frost morphology,frost mass,and frost layer thickness are generally consistent across surfaces with different wettability.Among the tested surfaces,frost crystal formation and complete surface coverage occurred latest on the superhydrophobic surface(CA=153.9–165.8℃),next on the bare aluminumsurface(75.3–83.2℃),and earliest on the hydrophilic surface(5.3–7.5℃).At the same frosting duration,the superhydrophobic surface exhibited a sparse and fluffy frost layer,the bare aluminum surface formed a rough and dense frost,while the hydrophilic surface developed a fine and compact frost layer.The amount of frost formation decreased in the order of hydrophilic>bare aluminum>superhydrophobic,indicating that the superhydrophobic surface provides the most significant anti-frosting effect during the initial stages of frost formation.For instance,on the Type A corrugated structure,after 15 min of frosting,the frost mass on the superhydrophobic surface was 38.78%and 68.45%lower than those on the bare aluminum and hydrophilic surfaces,respectively.After 30 min,these differences were 4.99%and 25.26%,respectively.Overall,the superhydrophobic surface exhibited the smallest frost mass and frost layer thickness,demonstrating superior anti-frosting performance compared with the other surface types.
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
基金supported by the National Natural Science Foundation of China (52172228)the Natural Science Foundation of Fujian Province (2024J01475 and 2023J05127)
文摘Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.
基金financial support from the National Natural Science Foundation of China(No.52035012)the Guangdong Basic and Applied Basic Research Foundation(No.2025A1515012203)。
文摘The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.
基金supported by the National Key Research and Development Project of the National Natural Science Foundation of China(Grant No.2022YFC3004605)the National Natural Science Foundation of China Youth Science Fund(Grant No.52104087).
文摘To advance the theoretical understanding,technological development,and field application of electric charge induction for monitoring rock deformation and failure,this study investigates the induced electric charge generated during the deformation and failure of igneous rocks.The charge originates mainly from a combination of electrical polarization and triboelectric effects.Through laboratory experiments,we analyzed the time-frequency evolution of induced electric charge signals and identified relevant monitoring parameters.An online downhole electric charge induction monitoring system was developed and validated in the field.Experimental results show that the dominant frequency range of induced electric charge signals generated during igneous rock deformation and failure lies between 0 and 23 Hz,and a low-pass finite impulse response(FIR)filter effectively suppresses noise.Optimal sensor distances for monitoring cubic and cylindrical specimens were determined to be 17 mm and 13 mm,respectively.We proposed early warning indicators,including the maximum absolute value of the induced electric charge,the arithmetic mean value,the distribution dispersion coefficient,and the cumulative sum value.In field application,time-domain curves and spatial distribution charts of these warning indicators correspond well with changes in abutment stress ahead of the mining face,offering indirect insights into local stress evolution.This research provides technical and equipment support for the application of electric charge induction technology to monitoring and early warning of coal bursts.
基金supported by the Research Fund of the National Natural Science Foundation of China(No.52374205)the Fundamental Research Project of the Educational Department of Liaoning Province(No.JYTMS20230793)the Research Fund of the State Key Laboratory of Coal Resources and Safe Mining,CUMT(No.YJY-XD-2024-A-016).
文摘To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.
基金supported by Shaanxi Fundamental Science Research Project for Chemistry and Biology(23JHQ011)Natural Science Foundation of Shaanxi(2024JC-YBMS-115)Natural Science Basic Research Plan in Shaanxi Province of China(2025JC-YBMS-141)。
文摘The severe shuttle effect and sluggish reaction kinetics in room-temperature sodium-sulfur(RT Na-S)batteries have been major bottlenecks hindering their practical application.To overcome these challenges,a straightforward reduction approach was employed to design three bimetallic alloy nanoparticles(FeNi,FeCo,and NiCo)supported on multistage porous carbon substrates.Experimental and theoretical calculations reveal that the charge transfer within the alloy catalyst influences the position of its d-band center and its degree of hybridization with sodium polysulfides(NaPSs).An increased charge transfer leads to a shift of the alloy’s d-band center closer to the Fermi energy level,thereby enhancing its adsorption and catalytic capabilities.Among the three alloy compositions,the FeNi alloy exhibits the highest charge transfer.Consequently,the FeNi alloy demonstrates the superior electrochemical performance,achieving a high reversible specific capacity of 848.2 mA h g^(−1),with an average capacity degradation rate of only 0.037%per cycle over 1000 cycles at 1.2 C.The S/FeNi/NC cathode exhibits a low electrolyte-to-sulfur(E/S)ratio of 6.6µL mg^(−1),while maintaining a high reversible specific capacity of 568.1 mA h g^(−1).This offers valuable insights for the application of alloy catalysts in the S/FeNi/NC cathode of RT Na-S batteries.
