Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauc...Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauchlackierung).The wetting behaviour of adhesive on these surfaces and the resulting contact angles were analysed to evaluate bonding effectiveness.Design/methodology/approach–Primer paint was applied to glass fibre reinforced plastic(GFRP)materials and cataphoresis coating was applied to steel.Contact angles of the coated surfaces were measured and compared to those of the uncoated(natural)surfaces.Findings–Results showed that applying primer to GFRP and KTL to steel increased their surface energy compared to untreated surfaces.A decrease in contact angle correlated with improved wetting,suggesting enhanced adhesion potential.Originality/value–While the effects of surface coatings on adhesion have been studied,there is limited research specifically on the adhesion-enhancing potential of KTL coatings.Typically used for corrosion resistance,KTL is shown here to also improve adhesion.The novelty lies in experimentally demonstrating KTL’s dual role as both a protective and adhesion-enhancing layer.展开更多
This paper investigates the adhesive nanocontact behavior of an elastic halfplane indented by a rigid cylindrical indenter,incorporating the simultaneous effects of surface elasticity,couple stresses,and adhesion.The ...This paper investigates the adhesive nanocontact behavior of an elastic halfplane indented by a rigid cylindrical indenter,incorporating the simultaneous effects of surface elasticity,couple stresses,and adhesion.The free surface of the half-plane is modeled by the Steigmann-Ogden surface elasticity theory,while the bulk material behavior is described by the classical couple-stress elasticity theory.The adhesion at the contact interface is characterized by the Maugis-Dugdale(MD)adhesive contact model.Building on the fundamental nonclassical Flamant solution,the governing equations and boundary conditions of the nanocontact problem are reformulated into a system of triple integral equations.These equations are solved numerically by the Gauss-Chebyshev quadratures in combination with an iterative algorithm.The validation against the existing literature confirms the accuracy and robustness of the proposed solution methodology.Comprehensive parametric studies are performed to elucidate the critical roles of surface elasticity and couple stresses in adhesive nanocontact.The numerical results provide insights into the complex interactions among surface,couple-stress,and adhesive effects.Specifically,the interplay between the surface and adhesive effects is predominantly competitive,while the interaction between the couple stresses and adhesion exhibits an intricate nature.The findings highlight the necessity of simultaneously considering surface elasticity,couple stresses,and adhesion in nanoindentation analyses to achieve accurate predictions of material responses.展开更多
This review systematically summarizes recent advancements in the design of antibacterial hydrogels and the surface-related factors influencing microbial adhesion to polymeric materials.Hydrogels,characterized by their...This review systematically summarizes recent advancements in the design of antibacterial hydrogels and the surface-related factors influencing microbial adhesion to polymeric materials.Hydrogels,characterized by their three-dimensional porous architecture and ultra-high water content,serve as ideal platforms for incorporating antibacterial agents(e.g.,metal ions,natural polymers)through physical/chemical interactions,enabling sustained release and enhanced antibacterial efficacy.For traditional polymers,surface properties(e.g.,roughness,charge,superhydrophobicity,free energy,nanoforce gradients)play critical roles in microbial adhesion.Modifying the surface properties of polymers through surface treatment can regulate antibacterial performance.In particular,by referencing the micro/nanostructures found on natural surfaces such as lotus leaves and cicada wings,antibacterial surfaces with multiple superior functions can be fabricated.Collectively,these findings provide a theoretical basis for the rational design of multifunctional antibacterial materials,offering material-based solutions to address complex infection scenarios and advance infection management strategies.展开更多
To enhance the adhesion of ceramic coatings in turbine blade Thermal Barrier Coatings(TBCs)systems,Laser Surface Texturing(LST)was employed to create microstructures on the metal bond coat.The bonding conditions and f...To enhance the adhesion of ceramic coatings in turbine blade Thermal Barrier Coatings(TBCs)systems,Laser Surface Texturing(LST)was employed to create microstructures on the metal bond coat.The bonding conditions and failure mechanisms of the ceramic coatings within these microstructures were thoroughly investigated.Femtosecond laser technology was used to fabricate three types of high-quality microstructure grooves:linear,sine wave,and grid patterns.These grooves exhibit uniform morphology,well-defined edges,and smooth inner walls.After ceramic coating deposition,columnar crystal structures grew perpendicularly along the groove walls,completely filling the microstructures and forming an arched support structure that significantly enhances mechanical interlocking and adhesion.Among the different microstructures,grid patterns demonstrated the best adhesion performance.In scratch tests,grid-patterned microstructures exhibited only localized small block spalling under high load conditions,avoiding large-scale delamination.This superior performance is attributed to the ability of grid pattern to effectively distribute stress in multiple directions and prevent crack propagation.By reducing stress concentration and enhancing mechanical interlocking points,grid-patterned microstructures also showed excellent resistance to spallation during thermal cycling,markedly improving the thermal resistance and adhesion of coating.展开更多
Post-traumatic peritendinous adhesion presents a significant challenge in clinical medicine.This study proposes the use of diamond-like carbon(DLC)deposited on polylactic acid(PLA)membranes as a biophysical mechanism ...Post-traumatic peritendinous adhesion presents a significant challenge in clinical medicine.This study proposes the use of diamond-like carbon(DLC)deposited on polylactic acid(PLA)membranes as a biophysical mechanism for anti-adhesion barrier to encase ruptured tendons in tendon-injured rats.The results indicate that PLA/DLC composite membrane exhibits more efficient anti-adhesion effect than PLA membrane,with histological score decreasing from 3.12±0.27 to 2.20±0.22 and anti-adhesion effectiveness increasing from 21.61%to 44.72%.Mechanistically,the abundant C=O bond functional groups on the surface of DLC can reduce reactive oxygen species level effectively;thus,the phosphorylation of NF-κB and M1 polarization of macrophages are inhibited.Consequently,excessive inflammatory response augmented by M1 macrophage-originated cytokines including interleukin-6(IL-6),interleukin-1β(IL-1β),and tumor necrosis factor-α(TNF-α)is largely reduced.For biocompatibility evaluation,PLA/DLC membrane is slowly absorbed within tissue and displays prolonged barrier effects compared to traditional PLA membranes.Further studies show the DLC depositing decelerates the release of degradation product lactic acid and its induction of macrophage M2 polarization by interfering esterase and PLA ester bonds,which further delays the fibrosis process.It was found that the PLA/DLC membrane possess an efficient biophysical mechanism for treatment of peritendinous adhesion.展开更多
Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesio...Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.展开更多
Bacterial adhesion is a critical process in many fields,such as implant infections,microbiologically influenced corrosion and bioelectricity generation in microbial fuel cells.During bacterial adhesion,the contact are...Bacterial adhesion is a critical process in many fields,such as implant infections,microbiologically influenced corrosion and bioelectricity generation in microbial fuel cells.During bacterial adhesion,the contact area between the attached bacteria and the patterned surface plays an important role.In this study,different surface topographies and treatments were employed to simulate three circumstances with different contact areas.A nanostripe structure with a period of 576.9 nm and a height of 203.5 nm was fabricated on pure titanium by femtosecond laser ablation.Bacteria in liquid attached to the peaks of the nanostripe structure and were stretched on the two adjacent nanostripes.Compared with the polished surface,the contact area between bacteria and the nanostripe surface was reduced to 50%,resulting in a reduction(about 50%)in the coverage rate of attached bacteria.In addition,the nanostripe surface was a hydrophobic surface with a water contact angle(WCA)of 112.1°,and the surface potential of the nanostripe surface was higher than that of the polished surface.However,the surface potential and wettability of the nanostripe surface played a minor role in the bacterial adhesion due to the reduced contact area.Upon drying,the attached bacteria on the nanostripe surface sank into the valley region and the contact area was about 40%larger than that on the polished surface.The lateral strength of bacterial adhesion on nanostripe surfaces was higher than that on polished surfaces,due to the larger contact area.Upon applying a lateral force of 10.0 nN,the percentage of bacteria remaining on the nanostripe surface(31.1%)was higher than that on the polished surface(11.9%).Hence,the bacterial adhesion on the nanopatterned surface was mainly determined by the contact area.The in-depth exploration of the relation between bacterial adhesion on the nanopatterned surface and the contact area enables the rational surface designs of biomaterials to regulate bacterial adhesion.展开更多
Objective:Endometrial tuberculosis,which commonly affects women of reproductive age,is a significant cause of intrauterine adhesions(IUA),potentially leading to hypomenorrhea,amenorrhea,and infertility.Hysteroscopic a...Objective:Endometrial tuberculosis,which commonly affects women of reproductive age,is a significant cause of intrauterine adhesions(IUA),potentially leading to hypomenorrhea,amenorrhea,and infertility.Hysteroscopic adhesiolysis is the primary treatment for IUA;however,studies specifically addressing its efficacy in tuberculosisinduced IUA remain scarce.This study aims to evaluate the therapeutic outcomes of hysteroscopic adhesiolysis for IUA caused by endometrial tuberculosis.Methods:This retrospective cohort study included patients diagnosed with tuberculosisinduced IUA who underwent hysteroscopic adhesiolysis at the Third Xiangya Hospital of Central South University between May 2014 and October 2022.Clinical data including age,medical history,adhesion severity,surgical treatment,and reproductive outcomes were analyzed.Results:Among 39 patients identified,2 were lost to follow-up.A total of 37 patients were included,with a follow-up duration ranging from 6 months to 9 years.Hypomenorrhea was reported in 24(64.9%)patients,secondary amenorrhea in 10(27.0%)patients,and normal menstruation in 3(8.1%)patients.Most patients presented with primary infertility(59.5%),and only 2(5.4%)had secondary infertility.The median American Fertility Society(AFS)score at initial assessment was 10(range,8−12);8(21.6%)patients had moderate IUA,and 29(78.4%)had severe IUA.A total of 86 surgical procedures were performed across 37 patients,with 27 patients undergoing 2 or more surgeries.Postoperatively,25(67.6%)patients achieved normalization of the uterine cavity,while 12(32.4%)still had a reduced cavity.Only 7(18.9%)patients had a grossly normal endometrium at the final surgery,all of whom had moderate adhesions at the initial procedure.Menstrual flow returned to normal in 12(32.4%)patients,while 25(67.6%)continued to experience hypomenorrhea.Of 29 patients who attempted in vitro fertilization and embryo transfer(IVF-ET),only 6(20.7%)conceived.Among these,4(13.8%)delivered at term via cesarean section;one case was complicated by postpartum hemorrhage due to uterine atony and another by placental adhesion.Conclusion:Endometrial tuberculosis can lead to severe IUA.Hysteroscopic adhesiolysis facilitates cavity restoration and improvement of menstrual conditions,but the overall reproductive outcomes remain suboptimal.展开更多
In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were invest...In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were investigated by using a single factor variable method.The surface morphologies of the shell molds produced by different temperatures of the surface(first)layer slurries were observed via electron microscopy.Furthermore,the microscopic composition of these shell molds was obtained by EDS,and the osmotic effect of the slurry on the wax patterns at different temperatures was also assessed by the PZ-200 Contact Angle detector.The forming reasons for the surface cracks and holes of thick and large ZTC4 titanium alloy by investment casting were analyzed.The experimental results show that the surface of the shell molds prepared by the surface layer slurry with a low temperature exhibits noticeable damage,which is mainly due to the poor coating performance and the serious expansion and contraction of wax pattern at low temperatures.The second layer shell material(SiO_(2),Al_(2)O_(3))immerses into the crack area of the surface layer,contacts and reacts with the molten titanium to form surface cracks and holes in the castings.With the increase of the temperature of surface layer slurry,the damage to the shell surface tends to weaken,and the composition of the shell molds'surface becomes more uniform with less impurities.The results show that the surface layer slurry at 22℃is evenly coated on the surface of the wax patterns with appropriate thickness,and there is no surface shell mold rupture caused by sliding slurry after sand leaching.The surface layer slurry temperature is consistent with the wax pattern temperature and the workshop temperature,so there is no damage of the surface layer shell caused by expansion and contraction.Therefore,the shell mold prepared by the surface layer slurry at this temperature has good integrity,isolating the contact between the low inert shell material and the titanium liquid effectively,and the ZTC4 titanium alloy cylinder casting prepared by this shell mold is smooth,without cracks and holes.展开更多
Purpose–This study aims to propose a cooperative adhesion control method for trains with multiple motors electric locomotives.The method is intended to optimize the output torque of each motor,maximize the utilizatio...Purpose–This study aims to propose a cooperative adhesion control method for trains with multiple motors electric locomotives.The method is intended to optimize the output torque of each motor,maximize the utilization of train adhesion within the total torque command,reduce the train skidding/sliding phenomenon and achieve optimal adhesion utilization for each axle,thus realizing the optimal allocation of the multi-motor electric locomotives.Design/methodology/approach–In this study,a model predictive control(MPC)-based cooperative maximum adhesion tracking control method for multi-motor electric locomotives is presented.Firstly,train traction system with multiple motors is constructed in accordance with Newton’s second law.These equations include the train dynamics equations,the axle dynamics equations,and the wheel-rail adhesion coefficient equations.Then,a new MPC-based multi-axle adhesion co-optimization method is put forward.This method calculates the optimal output torque through real-time iteration based on the known reference slip speed to achieve multi-axle co-optimization under different circumstances.Findings–This paper presents a MPC system designed for the cooperative control of multi-axle adhesion.The results indicate that the proposed control system is able to optimize the adhesion of multiple axles under numerous different conditions and achieve the optimal power distribution based on the reduction of train skidding/sliding.Originality/value–This study presents a novel cooperative adhesion tracking control scheme.It is designed for multi-motor electric locomotives,which has rarely been studied before.And simulations are carried out in different conditions,including variable surfaces and motor failing.展开更多
Herein,the surface of Moso bamboo was hydrophobically modified by combining O_(2)/N_(2)plasma treatments with polydimethylsiloxane(PDMS)solution treatment as the hydrophobic solution.The effects of plasma treatment pr...Herein,the surface of Moso bamboo was hydrophobically modified by combining O_(2)/N_(2)plasma treatments with polydimethylsiloxane(PDMS)solution treatment as the hydrophobic solution.The effects of plasma treatment process(power and time),PDMS solution concentration,and maceration time on the hydrophobic performance of bamboo specimens were studied,and the optimal treatment conditions for improving the hydrophobicity were determined.Scanning electron microscopy(SEM),fourier transform infrared(FTIR),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS)were used to analyze the surface morphology,chemical structure,and functional groups in the specimens before and after the plasma and PDMS solution treatments under optimal conditions.Response surface analysis was also performed to determine the optimal treatment conditions.Results show that the hydrophobic performance of the Moso bamboo surface is effectively improved and the surface energy is reduced after the coordinated treatment.The optimal conditions for improving the hydrophobic performance of Moso bamboo surface are a treatment power of 800 W,treatment time of 15 s,O_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for O_(2)plasma treatment and a treatment power of 1000 W,treatment time of 15 s,N_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for N_(2)plasma treatment.After treatment,silicone oil particles and plasma etching traces are observed on the bamboo surface.Moreover,Si-O bonds in the PDMS solution are grafted to the bamboo surface via covalent bonds,thereby increasing the contact angle and decreasing the surface energy to achieve the hydrophobic effect.展开更多
Objective:Cytotoxic T lymphocytes(CTLs)play a crucial role in the therapeutic approach to hepatocellular carcinoma(HCC).Recent research has indicated that junctional adhesion molecule-like protein(JAML)enhances the an...Objective:Cytotoxic T lymphocytes(CTLs)play a crucial role in the therapeutic approach to hepatocellular carcinoma(HCC).Recent research has indicated that junctional adhesion molecule-like protein(JAML)enhances the antitumor activity of CD8+T cells.Our study investigates the role of JAML+CD8+T cells in HCC.Methods:We utilized time-of-flight mass cytometry and an orthotopic mouse model of HCC to examine histone modifications in tumor-infiltrating immune cells undergoing immunotherapy.Flow cytometry was used to assess CD4+T cells differentiation and JAML expression in CD8+T cells infiltrating HCC.Correlation analysis revealed a strong positive correlation between lactate dehydrogenase A+(LDHA+)CD4+T cells and JAML+CD8+T cells.Subsequently,we evaluated the therapeutic effects of an agonistic anti-JAML antibody,both alone and combined with immunotherapy.Finally,RNA sequencing was conducted to identify potential regulatory mechanisms.Results:Immunotherapy significantly increased the percentage of CD8+T cells infiltrating HCC and induced histone modifications,such as H3K18 lactylation(H3K18la)in CD4+T cells.Flow cytometry analysis revealed that lactate promotes the differentiation of CD4+T cells into Th1 cells.LDHA,an enzyme that converts pyruvate to lactate,plays a key role in this process.Correlation analysis revealed a strong positive relationship between LDHA+CD4+T cells and JAML+CD8+T cells in patients who responded to immunotherapy.Moreover,high JAML expression in CD8+T cells was associated with a more favorable prognosis.In vivo experiments demonstrated that agonistic anti-JAML antibody therapy reduced tumor volume and significantly prolonged the survival of tumor-bearing mice,independent of the effects of anti-programmed cell death protein ligand-1 antibody(αPD-L1)-mediated immunotherapy.Pathway enrichment analysis further revealed that JAML enhances CTL responses through the oxidative phosphorylation pathway.Conclusions:Activation of JAML enhances CTL responses in HCC treatment,independent ofαPD-L1-mediated immunotherapy,providing a promising strategy for advanced HCC.展开更多
In recent decades,capacitive pressure sensors(CPSs)with high sensitivity have demonstrated significant potential in applications such as medical monitoring,artificial intelligence,and soft robotics.Efforts to enhance ...In recent decades,capacitive pressure sensors(CPSs)with high sensitivity have demonstrated significant potential in applications such as medical monitoring,artificial intelligence,and soft robotics.Efforts to enhance this sensitivity have predominantly focused on material design and structural optimization,with surface microstructures such as wrinkles,pyramids,and micro-pillars proving effective.Although finite element modeling(FEM)has guided enhancements in CPS sensitivity across various surface designs,a theoretical understanding of sensitivity improvements remains underexplored.This paper employs sinusoidal wavy surfaces as a representative model to analytically elucidate the underlying mechanisms of sensitivity enhancement through contact mechanics.These theoretical insights are corroborated by FEM and experimental validations.Our findings underscore that optimizing material properties,such as Young’s modulus and relative permittivity,alongside adjustments in surface roughness and substrate thickness,can significantly elevate the sensitivity.The optimal performance is achieved when the amplitude-to-wavelength ratio(H/)is about 0.2.These results offer critical insights for designing ultrasensitive CPS devices,paving the way for advancements in sensor technology.展开更多
BACKGROUND Regulator of G protein signaling(RGS)proteins participate in tumor formation and metastasis by acting on theα-subunit of heterotrimeric G proteins.The speci-fic effect of RGS,particularly RGS4,on the progr...BACKGROUND Regulator of G protein signaling(RGS)proteins participate in tumor formation and metastasis by acting on theα-subunit of heterotrimeric G proteins.The speci-fic effect of RGS,particularly RGS4,on the progression of gastric cancer(GC)is not yet clear.AIM To explore the role and underlying mechanisms of action of RGS4 in GC develop-ment.METHODS The prognostic significance of RGS4 in GC was analyzed using bioinformatics based public databases and verified by immunohistochemistry and quantitative polymerase chain reaction in 90 patients with GC.Function assays were employed to assess the carcinogenic impact of RGS4,and the mechanism of its possible influence was detected by western blot analysis.A nude mouse xenograft model was established to study the effects of RGS4 on GC growth in vitro.RESULTS RGS4 was highly expressed in GC tissues compared with matched adjacent normal tissues.Elevated RGS4 expression was correlated with increased tumor-node-metastasis stage,increased tumor grade as well as poorer overall survival in patients with GC.Cell experiments demonstrated that RGS4 knockdown suppressed GC cell proliferation,migration and invasion.Similarly,xenograft experiments confirmed that RGS4 silencing significantly inhibited tumor growth.Moreover,RGS4 knockdown resulted in reduced phosphorylation levels of focal adhesion kinase,phosphatidyl-inositol-3-kinase,and protein kinase B,decreased vimentin and N-cadherin,and elevated E-cadherin.CONCLUSION High RGS4 expression in GC indicates a worse prognosis and RGS4 is a prognostic marker.RGS4 influences tumor progression via the focal adhesion kinase/phosphatidyl-inositol-3-kinase/protein kinase B pathway and epithelial-mesenchymal transition.展开更多
The roughness of the fracture surface directly affects the strength,deformation,and permeability of the surrounding rock in deep underground engineering.Understanding the effect of high temperature and thermal cycle o...The roughness of the fracture surface directly affects the strength,deformation,and permeability of the surrounding rock in deep underground engineering.Understanding the effect of high temperature and thermal cycle on the fracture surface roughness plays an important role in estimating the damage degree and stability of deep rock mass.In this paper,the variations of fracture surface roughness of granite after different heating and thermal cycles were investigated using the joint roughness coefficient method(JRC),three-dimensional(3D)roughness parameters,and fractal dimension(D),and the mechanism of damage and deterioration of granite were revealed.The experimental results show an increase in the roughness of the granite fracture surface as temperature and cycle number were incremented.The variations of JRC,height parameter,inclination parameter and area parameter with the temperature conformed to the Boltzmann's functional distribution,while the D decreased linearly as the temperature increased.Besides,the anisotropy index(Ip)of the granite fracture surface increased as the temperature increased,and the larger parameter values of roughness characterization at different temperatures were attained mainly in directions of 20°–40°,60°–100°and 140°–160°.The fracture aperture of granite after fracture followed the Gauss distribution and the average aperture increased with increasing temperature,which increased from 0.665 mm at 25℃to 1.058 mm at 800℃.High temperature caused an uneven thermal expansion,water evaporation,and oxidation of minerals within the granite,which promoted the growth and expansion of microfractures,and reduced interparticle bonding strength.In particular,the damage was exacerbated by the expansion and cracking of the quartz phase transition after T>500℃.Thermal cycles contributed to the accumulation of this damage and further weakened the interparticle bonding forces,resulting in a significant increase in the roughness,anisotropy,and aperture of the fracture surface after five cycles.展开更多
The kitchen-oil wastewater is characterized by a high concentration of organicmatter,complex composition and refractory pollutants,which make wastewater treatment more difficult.Based on the study of using micro-elect...The kitchen-oil wastewater is characterized by a high concentration of organicmatter,complex composition and refractory pollutants,which make wastewater treatment more difficult.Based on the study of using micro-electric field characteristic catalyst HCLL-S8-M to enhance the electron transfer between microorganisms in kitchen-oil wastewater which further improved the COD removal rate,we focus on themicrobial community,intracellular metabolism and extracellular respiration,and make an in-depth analysis of the molecular biological mechanisms to microbial treatment in wastewater.It is found that electroactive microorganisms are enriched on the material surface,and the expression levels of cytochrome c and riboflavin genes related to electron transfer are up-regulated,confirming that the surface micro-electric field structure could enhance the electron transfer between microbial species and improve the efficiency ofwastewater degradation.This study provides a new idea for the treatment of refractory organic wastewater.展开更多
This paper presents an investigation on the target-guided coordinated control(TACC)of unmanned surface vehicles(USVs).In the scenario of tracking non-cooperative targets,the status information of the target can only b...This paper presents an investigation on the target-guided coordinated control(TACC)of unmanned surface vehicles(USVs).In the scenario of tracking non-cooperative targets,the status information of the target can only be obtained by some USVs.In order to achieve semi-encirclement tracking of noncooperative targets under maritime security conditions,a fixed-time tracking control method based on dynamic surface control(DSC)is proposed in this paper.Firstly,a novel TACC architecture with decoupled kinematic control law and decoupled kinetic control law was designed to reduce the complexity of control system design.Secondly,the proposed DSC-based target-guided kinematic control law including tracking points pre-allocation strategy and sigmoid artificial potential functions(SigAPFs)can avoid collisions during tracking process and optimize kinematic control output.Finally,a fixed-time TACC system was proposed to achieve fast convergence of kinematic and kinetics errors.The effectiveness of the proposed TACC approach in improving target tracking safety and reducing control output chattering was verified by simulation comparison results.展开更多
As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal...As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.展开更多
Amyloid-like proteins are critical for interfacial adhesion across various marine organisms and bacteria.However,the specific contributions of different functional residues remain unclear.Herein,we introduce an approa...Amyloid-like proteins are critical for interfacial adhesion across various marine organisms and bacteria.However,the specific contributions of different functional residues remain unclear.Herein,we introduce an approach to deconstruct and mimic these residues using synthetic homopolymers and random copolymers with phenyl,amino,carboxyl,and hydroxyl functional groups using reversible addition-fragmentation chain transfer(RAFT)polymerization.The resulting polymers,designed with comparable molecular weights(M_(n):10–20 kDa)and narrow dispersities(PDI<1.3),mimic the diverse surface chemistry of amyloid-like proteins,enabling systematic investigation of their adhesive properties.The interfacial adhesion forces of different polymer films were quantified using atomic force microscopy(AFM)with a colloidal probe.Remarkably copolymers with multiple functional groups demonstrated significantly enhanced adhesion compared to homopolymers,a trend corroborated by macroscopic shear strength and stability tests.These results highlight that the synergistic effects of multiple functional groups are crucial for achieving universal interfacial adhesion of macromolecules,offering insights into protein adhesion mechanisms,and guiding polymer-based interfacial modifications.展开更多
Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrat...Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.展开更多
基金supported by the Sakarya University of Applied Sciences-Scientific Research Projects Coordination in the scope of master’s thesis Project under project number 285–2025.
文摘Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauchlackierung).The wetting behaviour of adhesive on these surfaces and the resulting contact angles were analysed to evaluate bonding effectiveness.Design/methodology/approach–Primer paint was applied to glass fibre reinforced plastic(GFRP)materials and cataphoresis coating was applied to steel.Contact angles of the coated surfaces were measured and compared to those of the uncoated(natural)surfaces.Findings–Results showed that applying primer to GFRP and KTL to steel increased their surface energy compared to untreated surfaces.A decrease in contact angle correlated with improved wetting,suggesting enhanced adhesion potential.Originality/value–While the effects of surface coatings on adhesion have been studied,there is limited research specifically on the adhesion-enhancing potential of KTL coatings.Typically used for corrosion resistance,KTL is shown here to also improve adhesion.The novelty lies in experimentally demonstrating KTL’s dual role as both a protective and adhesion-enhancing layer.
基金Project supported by the National Natural Science Foundation of China(No.12072072)。
文摘This paper investigates the adhesive nanocontact behavior of an elastic halfplane indented by a rigid cylindrical indenter,incorporating the simultaneous effects of surface elasticity,couple stresses,and adhesion.The free surface of the half-plane is modeled by the Steigmann-Ogden surface elasticity theory,while the bulk material behavior is described by the classical couple-stress elasticity theory.The adhesion at the contact interface is characterized by the Maugis-Dugdale(MD)adhesive contact model.Building on the fundamental nonclassical Flamant solution,the governing equations and boundary conditions of the nanocontact problem are reformulated into a system of triple integral equations.These equations are solved numerically by the Gauss-Chebyshev quadratures in combination with an iterative algorithm.The validation against the existing literature confirms the accuracy and robustness of the proposed solution methodology.Comprehensive parametric studies are performed to elucidate the critical roles of surface elasticity and couple stresses in adhesive nanocontact.The numerical results provide insights into the complex interactions among surface,couple-stress,and adhesive effects.Specifically,the interplay between the surface and adhesive effects is predominantly competitive,while the interaction between the couple stresses and adhesion exhibits an intricate nature.The findings highlight the necessity of simultaneously considering surface elasticity,couple stresses,and adhesion in nanoindentation analyses to achieve accurate predictions of material responses.
基金supported by Science and Technology Plan of Luzhou under Grant No.2024JYJ039.
文摘This review systematically summarizes recent advancements in the design of antibacterial hydrogels and the surface-related factors influencing microbial adhesion to polymeric materials.Hydrogels,characterized by their three-dimensional porous architecture and ultra-high water content,serve as ideal platforms for incorporating antibacterial agents(e.g.,metal ions,natural polymers)through physical/chemical interactions,enabling sustained release and enhanced antibacterial efficacy.For traditional polymers,surface properties(e.g.,roughness,charge,superhydrophobicity,free energy,nanoforce gradients)play critical roles in microbial adhesion.Modifying the surface properties of polymers through surface treatment can regulate antibacterial performance.In particular,by referencing the micro/nanostructures found on natural surfaces such as lotus leaves and cicada wings,antibacterial surfaces with multiple superior functions can be fabricated.Collectively,these findings provide a theoretical basis for the rational design of multifunctional antibacterial materials,offering material-based solutions to address complex infection scenarios and advance infection management strategies.
基金supported by the National Science and Technology Major Project,China(No.J2019-VII-0013-0153)the Sichuan Science and Technology Program,China(Nos.2021ZDZX0001 and 2021ZDZX0002)。
文摘To enhance the adhesion of ceramic coatings in turbine blade Thermal Barrier Coatings(TBCs)systems,Laser Surface Texturing(LST)was employed to create microstructures on the metal bond coat.The bonding conditions and failure mechanisms of the ceramic coatings within these microstructures were thoroughly investigated.Femtosecond laser technology was used to fabricate three types of high-quality microstructure grooves:linear,sine wave,and grid patterns.These grooves exhibit uniform morphology,well-defined edges,and smooth inner walls.After ceramic coating deposition,columnar crystal structures grew perpendicularly along the groove walls,completely filling the microstructures and forming an arched support structure that significantly enhances mechanical interlocking and adhesion.Among the different microstructures,grid patterns demonstrated the best adhesion performance.In scratch tests,grid-patterned microstructures exhibited only localized small block spalling under high load conditions,avoiding large-scale delamination.This superior performance is attributed to the ability of grid pattern to effectively distribute stress in multiple directions and prevent crack propagation.By reducing stress concentration and enhancing mechanical interlocking points,grid-patterned microstructures also showed excellent resistance to spallation during thermal cycling,markedly improving the thermal resistance and adhesion of coating.
基金supported by the National Natural Science Foundation of China(No.82172408,81772314,and 81922045)the Original Exploration project(22ZR1480300)+5 种基金Outstanding Academic Leaders(Youth)project(21XD1422900)of Shanghai Science and Technology Innovation Action PlanPrinciple Investigator Innovation Team of Both Shanghai Sixth People’s Hospital and Shanghai Institute of Nutrition and Health,Shanghai Jiao Tong University Medical College“Two-hundred Talent”Program(No.20191829)The Second Three-Year Action Plan for Promoting Clinical Skills and Clinical Innovation in Municipal Hospitals of Shanghai Shenkang(No.SHDC2020CR4032)Shanghai Excellent Academic Leader ProgramShanghai Engineering Research Center for Orthopaedic Material Innovation and Tissue Regeneration(No.20DZ2254100)China Postdoctoral Science Foundation(2023M742347).
文摘Post-traumatic peritendinous adhesion presents a significant challenge in clinical medicine.This study proposes the use of diamond-like carbon(DLC)deposited on polylactic acid(PLA)membranes as a biophysical mechanism for anti-adhesion barrier to encase ruptured tendons in tendon-injured rats.The results indicate that PLA/DLC composite membrane exhibits more efficient anti-adhesion effect than PLA membrane,with histological score decreasing from 3.12±0.27 to 2.20±0.22 and anti-adhesion effectiveness increasing from 21.61%to 44.72%.Mechanistically,the abundant C=O bond functional groups on the surface of DLC can reduce reactive oxygen species level effectively;thus,the phosphorylation of NF-κB and M1 polarization of macrophages are inhibited.Consequently,excessive inflammatory response augmented by M1 macrophage-originated cytokines including interleukin-6(IL-6),interleukin-1β(IL-1β),and tumor necrosis factor-α(TNF-α)is largely reduced.For biocompatibility evaluation,PLA/DLC membrane is slowly absorbed within tissue and displays prolonged barrier effects compared to traditional PLA membranes.Further studies show the DLC depositing decelerates the release of degradation product lactic acid and its induction of macrophage M2 polarization by interfering esterase and PLA ester bonds,which further delays the fibrosis process.It was found that the PLA/DLC membrane possess an efficient biophysical mechanism for treatment of peritendinous adhesion.
文摘Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.
基金financial support from the National Nat-ural Science Foundation of China(Nos.52071028 and 52003028)the Beijing Nova Program(2022 Beijing Nova Program Cross Coop-eration Program No.20220484178).
文摘Bacterial adhesion is a critical process in many fields,such as implant infections,microbiologically influenced corrosion and bioelectricity generation in microbial fuel cells.During bacterial adhesion,the contact area between the attached bacteria and the patterned surface plays an important role.In this study,different surface topographies and treatments were employed to simulate three circumstances with different contact areas.A nanostripe structure with a period of 576.9 nm and a height of 203.5 nm was fabricated on pure titanium by femtosecond laser ablation.Bacteria in liquid attached to the peaks of the nanostripe structure and were stretched on the two adjacent nanostripes.Compared with the polished surface,the contact area between bacteria and the nanostripe surface was reduced to 50%,resulting in a reduction(about 50%)in the coverage rate of attached bacteria.In addition,the nanostripe surface was a hydrophobic surface with a water contact angle(WCA)of 112.1°,and the surface potential of the nanostripe surface was higher than that of the polished surface.However,the surface potential and wettability of the nanostripe surface played a minor role in the bacterial adhesion due to the reduced contact area.Upon drying,the attached bacteria on the nanostripe surface sank into the valley region and the contact area was about 40%larger than that on the polished surface.The lateral strength of bacterial adhesion on nanostripe surfaces was higher than that on polished surfaces,due to the larger contact area.Upon applying a lateral force of 10.0 nN,the percentage of bacteria remaining on the nanostripe surface(31.1%)was higher than that on the polished surface(11.9%).Hence,the bacterial adhesion on the nanopatterned surface was mainly determined by the contact area.The in-depth exploration of the relation between bacterial adhesion on the nanopatterned surface and the contact area enables the rational surface designs of biomaterials to regulate bacterial adhesion.
基金supported by the Wisdom Accumulation and Talent Cultivation Project of Third Xiangya Hosipital of Central South University,China(YX202112).
文摘Objective:Endometrial tuberculosis,which commonly affects women of reproductive age,is a significant cause of intrauterine adhesions(IUA),potentially leading to hypomenorrhea,amenorrhea,and infertility.Hysteroscopic adhesiolysis is the primary treatment for IUA;however,studies specifically addressing its efficacy in tuberculosisinduced IUA remain scarce.This study aims to evaluate the therapeutic outcomes of hysteroscopic adhesiolysis for IUA caused by endometrial tuberculosis.Methods:This retrospective cohort study included patients diagnosed with tuberculosisinduced IUA who underwent hysteroscopic adhesiolysis at the Third Xiangya Hospital of Central South University between May 2014 and October 2022.Clinical data including age,medical history,adhesion severity,surgical treatment,and reproductive outcomes were analyzed.Results:Among 39 patients identified,2 were lost to follow-up.A total of 37 patients were included,with a follow-up duration ranging from 6 months to 9 years.Hypomenorrhea was reported in 24(64.9%)patients,secondary amenorrhea in 10(27.0%)patients,and normal menstruation in 3(8.1%)patients.Most patients presented with primary infertility(59.5%),and only 2(5.4%)had secondary infertility.The median American Fertility Society(AFS)score at initial assessment was 10(range,8−12);8(21.6%)patients had moderate IUA,and 29(78.4%)had severe IUA.A total of 86 surgical procedures were performed across 37 patients,with 27 patients undergoing 2 or more surgeries.Postoperatively,25(67.6%)patients achieved normalization of the uterine cavity,while 12(32.4%)still had a reduced cavity.Only 7(18.9%)patients had a grossly normal endometrium at the final surgery,all of whom had moderate adhesions at the initial procedure.Menstrual flow returned to normal in 12(32.4%)patients,while 25(67.6%)continued to experience hypomenorrhea.Of 29 patients who attempted in vitro fertilization and embryo transfer(IVF-ET),only 6(20.7%)conceived.Among these,4(13.8%)delivered at term via cesarean section;one case was complicated by postpartum hemorrhage due to uterine atony and another by placental adhesion.Conclusion:Endometrial tuberculosis can lead to severe IUA.Hysteroscopic adhesiolysis facilitates cavity restoration and improvement of menstrual conditions,but the overall reproductive outcomes remain suboptimal.
文摘In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were investigated by using a single factor variable method.The surface morphologies of the shell molds produced by different temperatures of the surface(first)layer slurries were observed via electron microscopy.Furthermore,the microscopic composition of these shell molds was obtained by EDS,and the osmotic effect of the slurry on the wax patterns at different temperatures was also assessed by the PZ-200 Contact Angle detector.The forming reasons for the surface cracks and holes of thick and large ZTC4 titanium alloy by investment casting were analyzed.The experimental results show that the surface of the shell molds prepared by the surface layer slurry with a low temperature exhibits noticeable damage,which is mainly due to the poor coating performance and the serious expansion and contraction of wax pattern at low temperatures.The second layer shell material(SiO_(2),Al_(2)O_(3))immerses into the crack area of the surface layer,contacts and reacts with the molten titanium to form surface cracks and holes in the castings.With the increase of the temperature of surface layer slurry,the damage to the shell surface tends to weaken,and the composition of the shell molds'surface becomes more uniform with less impurities.The results show that the surface layer slurry at 22℃is evenly coated on the surface of the wax patterns with appropriate thickness,and there is no surface shell mold rupture caused by sliding slurry after sand leaching.The surface layer slurry temperature is consistent with the wax pattern temperature and the workshop temperature,so there is no damage of the surface layer shell caused by expansion and contraction.Therefore,the shell mold prepared by the surface layer slurry at this temperature has good integrity,isolating the contact between the low inert shell material and the titanium liquid effectively,and the ZTC4 titanium alloy cylinder casting prepared by this shell mold is smooth,without cracks and holes.
基金supported by Scientific Research Projects of China Association of Metros(CAMET-KY-2022039)State Key Laboratory of Traction and Control System of EMU and Locomotive(2023YJ386).
文摘Purpose–This study aims to propose a cooperative adhesion control method for trains with multiple motors electric locomotives.The method is intended to optimize the output torque of each motor,maximize the utilization of train adhesion within the total torque command,reduce the train skidding/sliding phenomenon and achieve optimal adhesion utilization for each axle,thus realizing the optimal allocation of the multi-motor electric locomotives.Design/methodology/approach–In this study,a model predictive control(MPC)-based cooperative maximum adhesion tracking control method for multi-motor electric locomotives is presented.Firstly,train traction system with multiple motors is constructed in accordance with Newton’s second law.These equations include the train dynamics equations,the axle dynamics equations,and the wheel-rail adhesion coefficient equations.Then,a new MPC-based multi-axle adhesion co-optimization method is put forward.This method calculates the optimal output torque through real-time iteration based on the known reference slip speed to achieve multi-axle co-optimization under different circumstances.Findings–This paper presents a MPC system designed for the cooperative control of multi-axle adhesion.The results indicate that the proposed control system is able to optimize the adhesion of multiple axles under numerous different conditions and achieve the optimal power distribution based on the reduction of train skidding/sliding.Originality/value–This study presents a novel cooperative adhesion tracking control scheme.It is designed for multi-motor electric locomotives,which has rarely been studied before.And simulations are carried out in different conditions,including variable surfaces and motor failing.
基金Zhejiang Provincial Cooperative Forestry Science and Technology Project(No.2023SY05)Zhejiang Provincial Science and Technology Project(No.2024F1065-2).
文摘Herein,the surface of Moso bamboo was hydrophobically modified by combining O_(2)/N_(2)plasma treatments with polydimethylsiloxane(PDMS)solution treatment as the hydrophobic solution.The effects of plasma treatment process(power and time),PDMS solution concentration,and maceration time on the hydrophobic performance of bamboo specimens were studied,and the optimal treatment conditions for improving the hydrophobicity were determined.Scanning electron microscopy(SEM),fourier transform infrared(FTIR),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS)were used to analyze the surface morphology,chemical structure,and functional groups in the specimens before and after the plasma and PDMS solution treatments under optimal conditions.Response surface analysis was also performed to determine the optimal treatment conditions.Results show that the hydrophobic performance of the Moso bamboo surface is effectively improved and the surface energy is reduced after the coordinated treatment.The optimal conditions for improving the hydrophobic performance of Moso bamboo surface are a treatment power of 800 W,treatment time of 15 s,O_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for O_(2)plasma treatment and a treatment power of 1000 W,treatment time of 15 s,N_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for N_(2)plasma treatment.After treatment,silicone oil particles and plasma etching traces are observed on the bamboo surface.Moreover,Si-O bonds in the PDMS solution are grafted to the bamboo surface via covalent bonds,thereby increasing the contact angle and decreasing the surface energy to achieve the hydrophobic effect.
基金funded by the Major Research Plan of the National Natural Science Foundation of China(No.92159202)the National Key Research and Development Program of China(No.2021YFA1100500)+1 种基金the Leading Innovation Team Project of Hangzhou Medical College(No.CXLJ202401)the Key Research and Development Plan of Zhejiang Provincial Department of Science and Technology(No.2024C03051)。
文摘Objective:Cytotoxic T lymphocytes(CTLs)play a crucial role in the therapeutic approach to hepatocellular carcinoma(HCC).Recent research has indicated that junctional adhesion molecule-like protein(JAML)enhances the antitumor activity of CD8+T cells.Our study investigates the role of JAML+CD8+T cells in HCC.Methods:We utilized time-of-flight mass cytometry and an orthotopic mouse model of HCC to examine histone modifications in tumor-infiltrating immune cells undergoing immunotherapy.Flow cytometry was used to assess CD4+T cells differentiation and JAML expression in CD8+T cells infiltrating HCC.Correlation analysis revealed a strong positive correlation between lactate dehydrogenase A+(LDHA+)CD4+T cells and JAML+CD8+T cells.Subsequently,we evaluated the therapeutic effects of an agonistic anti-JAML antibody,both alone and combined with immunotherapy.Finally,RNA sequencing was conducted to identify potential regulatory mechanisms.Results:Immunotherapy significantly increased the percentage of CD8+T cells infiltrating HCC and induced histone modifications,such as H3K18 lactylation(H3K18la)in CD4+T cells.Flow cytometry analysis revealed that lactate promotes the differentiation of CD4+T cells into Th1 cells.LDHA,an enzyme that converts pyruvate to lactate,plays a key role in this process.Correlation analysis revealed a strong positive relationship between LDHA+CD4+T cells and JAML+CD8+T cells in patients who responded to immunotherapy.Moreover,high JAML expression in CD8+T cells was associated with a more favorable prognosis.In vivo experiments demonstrated that agonistic anti-JAML antibody therapy reduced tumor volume and significantly prolonged the survival of tumor-bearing mice,independent of the effects of anti-programmed cell death protein ligand-1 antibody(αPD-L1)-mediated immunotherapy.Pathway enrichment analysis further revealed that JAML enhances CTL responses through the oxidative phosphorylation pathway.Conclusions:Activation of JAML enhances CTL responses in HCC treatment,independent ofαPD-L1-mediated immunotherapy,providing a promising strategy for advanced HCC.
基金supported by the National Natural Science Foundation of China(Grant No.12272369)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0620101).
文摘In recent decades,capacitive pressure sensors(CPSs)with high sensitivity have demonstrated significant potential in applications such as medical monitoring,artificial intelligence,and soft robotics.Efforts to enhance this sensitivity have predominantly focused on material design and structural optimization,with surface microstructures such as wrinkles,pyramids,and micro-pillars proving effective.Although finite element modeling(FEM)has guided enhancements in CPS sensitivity across various surface designs,a theoretical understanding of sensitivity improvements remains underexplored.This paper employs sinusoidal wavy surfaces as a representative model to analytically elucidate the underlying mechanisms of sensitivity enhancement through contact mechanics.These theoretical insights are corroborated by FEM and experimental validations.Our findings underscore that optimizing material properties,such as Young’s modulus and relative permittivity,alongside adjustments in surface roughness and substrate thickness,can significantly elevate the sensitivity.The optimal performance is achieved when the amplitude-to-wavelength ratio(H/)is about 0.2.These results offer critical insights for designing ultrasensitive CPS devices,paving the way for advancements in sensor technology.
基金Supported by the Fundamental Research Program of Shanxi Province,No.202203021222418Research Program of Shanxi Provincial Health Commission,No.2023061+2 种基金Fundamental Research Cooperation Program of Beijing-Tianjin-Hebei Region of Natural Science Foundation of Tianjin,No.22JCZXJC00140Tianjin Major Science and Technology Project,No.21ZXJBSY00110Tianjin Health and Science and Technology Project,No.TJWJ2024ZK001.
文摘BACKGROUND Regulator of G protein signaling(RGS)proteins participate in tumor formation and metastasis by acting on theα-subunit of heterotrimeric G proteins.The speci-fic effect of RGS,particularly RGS4,on the progression of gastric cancer(GC)is not yet clear.AIM To explore the role and underlying mechanisms of action of RGS4 in GC develop-ment.METHODS The prognostic significance of RGS4 in GC was analyzed using bioinformatics based public databases and verified by immunohistochemistry and quantitative polymerase chain reaction in 90 patients with GC.Function assays were employed to assess the carcinogenic impact of RGS4,and the mechanism of its possible influence was detected by western blot analysis.A nude mouse xenograft model was established to study the effects of RGS4 on GC growth in vitro.RESULTS RGS4 was highly expressed in GC tissues compared with matched adjacent normal tissues.Elevated RGS4 expression was correlated with increased tumor-node-metastasis stage,increased tumor grade as well as poorer overall survival in patients with GC.Cell experiments demonstrated that RGS4 knockdown suppressed GC cell proliferation,migration and invasion.Similarly,xenograft experiments confirmed that RGS4 silencing significantly inhibited tumor growth.Moreover,RGS4 knockdown resulted in reduced phosphorylation levels of focal adhesion kinase,phosphatidyl-inositol-3-kinase,and protein kinase B,decreased vimentin and N-cadherin,and elevated E-cadherin.CONCLUSION High RGS4 expression in GC indicates a worse prognosis and RGS4 is a prognostic marker.RGS4 influences tumor progression via the focal adhesion kinase/phosphatidyl-inositol-3-kinase/protein kinase B pathway and epithelial-mesenchymal transition.
基金funding support from the National Natural Science Foundation of China(Grant No.52274082)the Program of Qingjiang Excellent Young Talents,Jiangxi University of Science and Technology(Grant No.JXUSTQJBJ2020003)the Innovation Fund Designated for Graduate Students of Jiangxi Province(Grant No.YC2023-B215).
文摘The roughness of the fracture surface directly affects the strength,deformation,and permeability of the surrounding rock in deep underground engineering.Understanding the effect of high temperature and thermal cycle on the fracture surface roughness plays an important role in estimating the damage degree and stability of deep rock mass.In this paper,the variations of fracture surface roughness of granite after different heating and thermal cycles were investigated using the joint roughness coefficient method(JRC),three-dimensional(3D)roughness parameters,and fractal dimension(D),and the mechanism of damage and deterioration of granite were revealed.The experimental results show an increase in the roughness of the granite fracture surface as temperature and cycle number were incremented.The variations of JRC,height parameter,inclination parameter and area parameter with the temperature conformed to the Boltzmann's functional distribution,while the D decreased linearly as the temperature increased.Besides,the anisotropy index(Ip)of the granite fracture surface increased as the temperature increased,and the larger parameter values of roughness characterization at different temperatures were attained mainly in directions of 20°–40°,60°–100°and 140°–160°.The fracture aperture of granite after fracture followed the Gauss distribution and the average aperture increased with increasing temperature,which increased from 0.665 mm at 25℃to 1.058 mm at 800℃.High temperature caused an uneven thermal expansion,water evaporation,and oxidation of minerals within the granite,which promoted the growth and expansion of microfractures,and reduced interparticle bonding strength.In particular,the damage was exacerbated by the expansion and cracking of the quartz phase transition after T>500℃.Thermal cycles contributed to the accumulation of this damage and further weakened the interparticle bonding forces,resulting in a significant increase in the roughness,anisotropy,and aperture of the fracture surface after five cycles.
基金supported by the National Natural Science Foundation of China(Nos.52150056 and 51838005)the Basic and Applied Basic Research Foundation of Guangdong Province(No.2023A1515111061).
文摘The kitchen-oil wastewater is characterized by a high concentration of organicmatter,complex composition and refractory pollutants,which make wastewater treatment more difficult.Based on the study of using micro-electric field characteristic catalyst HCLL-S8-M to enhance the electron transfer between microorganisms in kitchen-oil wastewater which further improved the COD removal rate,we focus on themicrobial community,intracellular metabolism and extracellular respiration,and make an in-depth analysis of the molecular biological mechanisms to microbial treatment in wastewater.It is found that electroactive microorganisms are enriched on the material surface,and the expression levels of cytochrome c and riboflavin genes related to electron transfer are up-regulated,confirming that the surface micro-electric field structure could enhance the electron transfer between microbial species and improve the efficiency ofwastewater degradation.This study provides a new idea for the treatment of refractory organic wastewater.
文摘This paper presents an investigation on the target-guided coordinated control(TACC)of unmanned surface vehicles(USVs).In the scenario of tracking non-cooperative targets,the status information of the target can only be obtained by some USVs.In order to achieve semi-encirclement tracking of noncooperative targets under maritime security conditions,a fixed-time tracking control method based on dynamic surface control(DSC)is proposed in this paper.Firstly,a novel TACC architecture with decoupled kinematic control law and decoupled kinetic control law was designed to reduce the complexity of control system design.Secondly,the proposed DSC-based target-guided kinematic control law including tracking points pre-allocation strategy and sigmoid artificial potential functions(SigAPFs)can avoid collisions during tracking process and optimize kinematic control output.Finally,a fixed-time TACC system was proposed to achieve fast convergence of kinematic and kinetics errors.The effectiveness of the proposed TACC approach in improving target tracking safety and reducing control output chattering was verified by simulation comparison results.
基金financially supported by the National Key R&D Program of China(No.2022YFE0121300)the National Natural Science Foundation of China(No.52374376)the Introduction Plan for High-end Foreign Experts(No.G2023105001L)。
文摘As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.
基金supported by the National Natural Science Foundation of China(Nos.22375122 and 22105065)the National Science Fund for Distinguished Young Scholars(No.52225301)+3 种基金the National Key R&D Program of China(Nos.2020YFA0710400 and 2020YFA0710402)the 111 Project(No.B14041)Fundamental Research Funds for Central Universities(No.GK202304040)Open Project of the State Key Laboratory of Supramolecular Structure and Materials(No.sklssm2024023)。
文摘Amyloid-like proteins are critical for interfacial adhesion across various marine organisms and bacteria.However,the specific contributions of different functional residues remain unclear.Herein,we introduce an approach to deconstruct and mimic these residues using synthetic homopolymers and random copolymers with phenyl,amino,carboxyl,and hydroxyl functional groups using reversible addition-fragmentation chain transfer(RAFT)polymerization.The resulting polymers,designed with comparable molecular weights(M_(n):10–20 kDa)and narrow dispersities(PDI<1.3),mimic the diverse surface chemistry of amyloid-like proteins,enabling systematic investigation of their adhesive properties.The interfacial adhesion forces of different polymer films were quantified using atomic force microscopy(AFM)with a colloidal probe.Remarkably copolymers with multiple functional groups demonstrated significantly enhanced adhesion compared to homopolymers,a trend corroborated by macroscopic shear strength and stability tests.These results highlight that the synergistic effects of multiple functional groups are crucial for achieving universal interfacial adhesion of macromolecules,offering insights into protein adhesion mechanisms,and guiding polymer-based interfacial modifications.
基金the National Key R&D Program of China(2022YFA1505200)the National Natural Science Foundation of China(22472140,22021001)the Fundamental Research Funds for the Central Universities(20720210017 and 20720210009)。
文摘Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.
