Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellen...Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.展开更多
In this study,polyacrylic acid(PAA)films were employed as a model system,and a series of PAA films with tunable water wettability was systematically prepared by varying molecular weight and curing temperature.Using at...In this study,polyacrylic acid(PAA)films were employed as a model system,and a series of PAA films with tunable water wettability was systematically prepared by varying molecular weight and curing temperature.Using attenuated total reflectance Fourier-transform infrared spectroscopy(ATR-FTIR),the molecular configurations of surface carboxyl groups(COOH),free carboxyl(COOH_(f))and hydrogen-bonded carboxyl(COOH_(HB),were directly correlated with the polar component of surface energy(γ^(s,p)).By decomposing theγ^(s,p)values of the PAA thin films as a sum of the contributions of COOH_(f)and COOH_(H B),the intrinsic polar component of surface energy of COOH_(H B)(γ_(H B)^(s,p*))was quantified for the first time as 8.34 mN/m,significantly lower than that of COOH_(f)(γ_(f)^(s,p*)=34 mN/m).This result highlights that hydrogen bonding markedly reduces theγ^(s,p),providing a rational explanation for the relatively large water contact angle observed on PAA thin films.Furthermore,it establishes a thermodynamic basis for estimating the fraction of surface COOH_(H B)groups(f H B)from wettability measurements.Further extension of the model to carboxyl-terminated self-assembled monolayers(COOH-SAMs)revealed that surface COOH density(ΣCOOH)critically regulates wetting behavior:whenΣCOOH ranges from 4.30 to 5.25 nm^(-2),COOH groups predominantly exist in a free state and facilitate effective hydration layers,thereby promoting superhydrophilicity.Overall,this study not only establishes a unified thermodynamic framework linking surface COOH configurations to macroscopic wettability,but also validates its universality by extending it to COOH-SAMs systems,thereby providing a unified theoretical framework for the controllable design of hydrophilicity in various COOH-functionalized surfaces.展开更多
Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for ca...Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for catalyst design and performance improvement in these applications.In this work,we systematically investigate the HPOR/HPRR mechanisms on low-index Pt surfaces,specifically Pt(111),Pt(100)and Pt(110),through density functional theory(DFT)calculations combined with the computational hydrogen electrode(CHE)model.For HPOR,all the low-index Pt surfaces exhibit a unified potential-determining step(PDS)involving the electrochemical oxidation of hydroperoxyl intermediates(HOO*).The binding free energy of HOO*(Δ_(GHOO*))emerges as an activity descriptor,with Pt(110)exhibiting the highest HPOR activity.The HPRR mechanism follows a chem-electrochemical(C-EC)pathway.The rate-determining step(RDS)of HPRR is either the cleavage of the HO-OH bond(chemical)or the reduction of HO(electrochemical),depending on their respective activation energies.These activation energies are functions of the HO*binding free energy,Δ_(GHO*),establishingΔ_(GHO*)as the descriptor for HPRR activity prediction.Pt(111)and Pt(100)are identified as the most active HPRR catalysts among the studied metal surfaces,although they still experience a significant overpotential.The scaling relationship betweenΔ_(GHOO*)andΔ_(GHO*)reveals a thermodynamic coupling of HPOR and HPRR,explaining their occurrence on Pt surfaces.These findings provide important insights and activity descriptors for both HPOR and HPRR,providing valuable guidance for the design of electrocatalysts in H_(2)O_(2)-related energy applications and fuel cells.展开更多
This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by th...This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by the patterns found on marine shells.The impacts of the parameters on wettability,Surface Free Energy(SFE),surface topography,and texture roughness generated by the laser beam tracking a spiral path were investigated.Reducing spiral pitch produces more complicated and chaotic surface patterns.Most surfaces are hydrophobic,and surface roughness and topography influence the Contact Angle(CA).Topography and roughness were affected by frequency and scanning speed;a decrease in scanning speed and frequency generated more chaotic and irregular surface textures.With general factorial analysis and Analysis of Variance(ANOVA),our statistical study reveals that accounting for 88%of the influence,the scanning speed is the primary factor influencing surface roughness.On the other hand,the spiral pitch is essential for defining the struc-tural features of the surface,even if it less influences roughness.The SFE of laser-textured CoCr28Mo alloy specimens was optimizable within the range of 14-32 mN/m.The relevant findings offer valuable insights into optimizing LST for the specific surface properties of the Co-based alloy.展开更多
The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has att...The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.展开更多
The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Sur...The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."展开更多
Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been d...Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.展开更多
This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experi...This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experiments were conducted in a constant-temperature bath at a cold surface temperature of–5℃,relative humidity of 90%,and ambient air temperature of 10℃.The results reveal that the variation trends of frost morphology,frost mass,and frost layer thickness are generally consistent across surfaces with different wettability.Among the tested surfaces,frost crystal formation and complete surface coverage occurred latest on the superhydrophobic surface(CA=153.9–165.8℃),next on the bare aluminumsurface(75.3–83.2℃),and earliest on the hydrophilic surface(5.3–7.5℃).At the same frosting duration,the superhydrophobic surface exhibited a sparse and fluffy frost layer,the bare aluminum surface formed a rough and dense frost,while the hydrophilic surface developed a fine and compact frost layer.The amount of frost formation decreased in the order of hydrophilic>bare aluminum>superhydrophobic,indicating that the superhydrophobic surface provides the most significant anti-frosting effect during the initial stages of frost formation.For instance,on the Type A corrugated structure,after 15 min of frosting,the frost mass on the superhydrophobic surface was 38.78%and 68.45%lower than those on the bare aluminum and hydrophilic surfaces,respectively.After 30 min,these differences were 4.99%and 25.26%,respectively.Overall,the superhydrophobic surface exhibited the smallest frost mass and frost layer thickness,demonstrating superior anti-frosting performance compared with the other surface types.展开更多
AIM:To investigate the impact of depression-like behavior on ocular surface homeostasis in a mouse model,with a focus on dry eye-like alterations.METHODS:Male C57BL/6J mice(10-12 weeks old)were randomly assigned to co...AIM:To investigate the impact of depression-like behavior on ocular surface homeostasis in a mouse model,with a focus on dry eye-like alterations.METHODS:Male C57BL/6J mice(10-12 weeks old)were randomly assigned to control or restraint stress(RS)groups.The RS group underwent three intermittent 24-hour restraint sessions to induce depressive-like behavior.Behavioral testing,tear secretion measurement,and corneal Oregon Green Dextran(OGD)staining were performed.Postmortem analyses included histological evaluation of lacrimal glands,goblet cell quantification using periodic acid-Schiff staining,and assessment of key inflammatory and apoptotic markers:interleukin(IL)-17,matrix metalloproteinases(MMP)-3,MMP-9,IL-13,interferon(IFN)-γ,and cleaved caspase-3 and-8.RESULTS:Repeated RS induced depression-like behavior and significant ocular surface changes.RStreated mice showed increased corneal OGD uptake and upregulation of gene/protein expression of IL-17,MMP-3,and MMP-9(P<0.05).Goblet cell density and IL-13 protein expression were reduced,while IFN-γprotein expression was elevated(P<0.05).Cleaved caspase-3 and-8 levels were significantly increased in both cornea and conjunctiva.Tear volume and lacrimal gland size were unchanged;however,mild inflammatory infiltration was observed in lacrimal glands.CONCLUSION:Repeated RS leads to ocular surface inflammation and dry eye-like pathology,including corneal barrier disruption,goblet cell loss,and epithelial apoptosis.These findings suggest that depression contributes to the pathogenesis of dry eye disease via immune-mediated mechanisms.展开更多
The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfa...The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.展开更多
BACKGROUND Dry eye disease(DED)is a multifactorial ocular surface disorder with rising prevalence.It is closely related to systemic health and psychological factors,such as sleep and mood disorders,which significantly...BACKGROUND Dry eye disease(DED)is a multifactorial ocular surface disorder with rising prevalence.It is closely related to systemic health and psychological factors,such as sleep and mood disorders,which significantly impact the quality of life of patients.AIM To explore the correlations between ocular surface function,sleep quality,and anxiety/depression in patients with DED.METHODS This was a cross-sectional investigative study that included 358 patients with DED between January 2022 and January 2025.Ocular surface was assessed using the ocular surface disease index(OSDI),tear film break-up time,fluorescein staining score,and Schirmer I test.The Pittsburgh Sleep Quality Index(PSQI),Self-Rating Anxiety Scale(SAS),and Self-Rating Depression Scale(SDS)were used to evaluate sleep quality and anxiety/depression levels.Correlation and linear regression analyses were used to explore the relationships.RESULTS The mean PSQI score of the patients was 9.94±2.18;the mean SAS score was 47.30±4.90,and the mean SDS score was 50.08±5.52.These suggested a prevalence of sleep and psychological abnormalities.There was a significant correlation between the indicators of ocular surface function(OSDI,tear film break-up time,fluorescein staining,and Schirmer I test)and PSQI,SAS,and SDS scores(P<0.05).Moreover,multiple regression revealed that age≥50 years(β=1.55,P=0.029),PSQI scores(β=0.58,P<0.001),SAS scores(β=0.17,P=0.017),and SDS scores(β=0.15,P=0.019)were independent predictors of the OSDI scores.CONCLUSION Ocular surface function in patients with DED is closely related to sleep quality and anxiety/depression,emphasizing the need for holistic clinical management.展开更多
Surface properties of crystals are critical in many fields,including electrochemistry and photoelectronics,the efficient prediction of which can expedite the design and optimization of catalysts,batteries,alloys etc.H...Surface properties of crystals are critical in many fields,including electrochemistry and photoelectronics,the efficient prediction of which can expedite the design and optimization of catalysts,batteries,alloys etc.However,we are still far from realizing this vision due to the rarity of surface property-related databases,especially for multicomponent compounds,due to the large sample spaces and limited computing resources.In this work,we present a surface emphasized multi-task crystal graph convolutional neural network(SEM-CGCNN)to predict multiple surface properties simultaneously from crystal structures.The model is evaluated on a dataset of 3526 surface energies and work functions of binary magnesium intermetallics obtained through first-principles calculations,and obvious improvements are observed both in efficiency and accuracy over the original CGCNN model.By transferring the pre-trained model to the datasets of pure metals and other intermetallics,the fine-tuned SEM-CGCNN outperforms learning from scratch and can be further applied to other surface properties and materials systems.This study could be a paradigm for the end-to-end mapping of atomic structures to anisotropic surface properties of crystals,which provides an efficient framework to understand and screen materials with desired surface characteristics.展开更多
With increasing awareness of myopia control,various preventive methods have been developed.In recent decades,a range of specialized spectacle lenses utilizing optical interventions has been manufactured and widely ado...With increasing awareness of myopia control,various preventive methods have been developed.In recent decades,a range of specialized spectacle lenses utilizing optical interventions has been manufactured and widely adopted for myopia management.However,the underlying optical mechanisms of these lenses remain unclear,and there is a lack of simulation methods for pre-manufacturing analysis.Meanwhile,the structures of these lenses are becoming increasingly complex,even incorporating an aspheric segment array on a curved base.To address these challenges,we have developed an efficient,accurate,and flexible modeling method for simulating such lenses,along with an experimental setup for validation.We provide deeper insights into the optical mechanisms of these lenses and establish a convenient design framework that facilitates the development of optimized lens structures.展开更多
The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative conti...The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.展开更多
Photodetectors can convert light energy into electrical signals,so are widely used in photovoltaics,photon counting,monitoring,and imaging.Photodetectors are easy to prepare high-resolution photochips because of their...Photodetectors can convert light energy into electrical signals,so are widely used in photovoltaics,photon counting,monitoring,and imaging.Photodetectors are easy to prepare high-resolution photochips because of their small size unit integration.However,these photodetector units often exhibit poor photoelectric performance due to material defects and inadequate structures,which greatly limit the functions of devices.Designing modification strategies and micro-/nanostructures can compensate for defects,adjust the bandgap,and develop novel quantum structures,which consequently optimize photovoltaic units and revolutionize optoelectronic devices.Here,this paper aims to comprehensively elaborate on the surface/interface engineering scheme of micro-/nano-photodetectors.It starts from the fundamentals of photodetectors,such as principles,types,and parameters,and describes the influence of material selection,manufacturing techniques,and post-processing.Then,we analyse in detail the great influence of surface/interface engineering on the performance of photovoltaic devices,including surface/interface modification and micro-/nanostructural design.Finally,the applications and prospects of optoelectronic devices in various fields such as miniaturization of electronic devices,robotics,and human–computer interaction are shown.展开更多
The National Geophysical Data Center(NGDC)of the United States has collected aeromagnetic data for input into a series of geomagnetic models to improve model resolution;however,in the Tibetan Plateau region,ground-bas...The National Geophysical Data Center(NGDC)of the United States has collected aeromagnetic data for input into a series of geomagnetic models to improve model resolution;however,in the Tibetan Plateau region,ground-based observations remain insufficient to clearly reflect the characteristics of the region’s lithospheric magnetism.In this study,we evaluate the lithospheric magnetism of the Tibetan Plateau by using a 3D surface spline model based on observations from>200 newly constructed repeat stations(portable stations)to determine the spatial distribution of plateau geomagnetism,as well as its correlation with the tectonic features of the region.We analyze the relationships between M≥5 earthquakes and lithospheric magnetic field variations on the Tibetan Plateau and identify regions susceptible to strong earthquakes.We compare the geomagnetic results with those from an enhanced magnetic model(EMM2015)developed by the NGDC and provide insights into improving lithospheric magnetic field calculations in the Tibetan Plateau region.Further research reveals that these magnetic anomalies exhibit distinct differences from the magnetic-seismic correlation mechanisms observed in other tectonic settings;here,they are governed primarily by the combined effects of compressional magnetism,thermal magnetism,and deep thermal stress.This study provides new evidence of geomagnetic anomalies on the Tibetan Plateau,interprets them physically,and demonstrates their potential for identifying seismic hazard zones on the Plateau.展开更多
To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype wa...To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype was selected by Finite Element Method(FEM).In addition,the bionic parameters were optimized by Response Surface Method(RSM).Samples holding BNS were prepared by Laser Processing,tribological properties were tested by a Friction and Wear Tester and worn surface morphology was characterized by a Scanning Electron Microscope(SEM).The results showed that BNS on friction surface could regulate the stress distribution and alleviate the peak stress.Among all samples,the coupled texture of pit-hexagonal got the minimum peak stress.During braking,bionic texture could also collect wear debris or change the motion forms from sliding to rotation,which can reduce abnormal abrasion.The wear rate was reduced by 19.31%.The results in this paper can provide a new idea for enhancing the tribological properties of CBFMs,and can also lay the foundation for further research of bionic tribology.展开更多
The Arno River Basin(Central Italy)is affected by a considerable anthropogenic pressure due to the presence of large cities and widespread industrial and agricultural practices.In this work,26 water samples from the A...The Arno River Basin(Central Italy)is affected by a considerable anthropogenic pressure due to the presence of large cities and widespread industrial and agricultural practices.In this work,26 water samples from the Arno River and its main tributaries were analyzed to assess the water pollution status.The geochemical composition of the Arno River changes from the source(dominated by a Ca-HCO_(3) facies)to the mouth(where a Na-Cl(SO4)chemistry prevails)with an increasing quality deterioration,as suggested by the Chemical Water Quality Index,due to anthropogenic contributions and seawater intrusion before flowing into the Ligurian Sea.The Ombrone and Usciana tributaries introduce anthropogenic pollutants into the Arno River,whilst Elsa tributary supplies significant contents of geogenic sulfate.The concentrations of dissolved nitrate and nitrite(up to 63 and 9 mg/L,respectively)and the respective isotopic values of𝛿15N and𝛿18O were also determined to understand origin and fate of the N-species in the Arno River Basin surface waters.The combined application of𝛿15N-NO_(3) and𝛿18O-NO_(3) and N-source apportionment modelling allowed the identification of soil organic nitrogen and sewage and domestic wastes as primary sources for dissolved NO_(3)-.The𝛿15N-NO_(2) and𝛿18O-NO_(2) values suggest that the nitrification process affects the ARB waters,thus controlling the abundances and proportion of the N-species.Our work indicates that additional efforts are needed to improve management strategies to reduce the release of nitrogenated species to the surface waters of the Arno River Basin,since little progress has been made from the early 2000s.展开更多
We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by&quo...We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.展开更多
Crossflow instability will be present when the vehicle has an angle of attack in hypersonic flow,and it might play a dominant role in hypersonic boundary layer transition.By far the mechanism of crossflow instability-...Crossflow instability will be present when the vehicle has an angle of attack in hypersonic flow,and it might play a dominant role in hypersonic boundary layer transition.By far the mechanism of crossflow instability-induced hypersonic boundary layer transition is still out of understanding,although the large effort has been devoted.Upon this work,the overall roughness effect on instabilities in hypersonic flow was researched experimentally.Surface flush-mounted pressure sensors and infrared camera were employed to investigate the instability waves when different rough surfaces were deployed.The results reveal that the moderate surface roughness level on cone model can suppress the growth of crossflow instabilities at certain azimuthal angles in hypersonic flow.展开更多
文摘Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.
文摘In this study,polyacrylic acid(PAA)films were employed as a model system,and a series of PAA films with tunable water wettability was systematically prepared by varying molecular weight and curing temperature.Using attenuated total reflectance Fourier-transform infrared spectroscopy(ATR-FTIR),the molecular configurations of surface carboxyl groups(COOH),free carboxyl(COOH_(f))and hydrogen-bonded carboxyl(COOH_(HB),were directly correlated with the polar component of surface energy(γ^(s,p)).By decomposing theγ^(s,p)values of the PAA thin films as a sum of the contributions of COOH_(f)and COOH_(H B),the intrinsic polar component of surface energy of COOH_(H B)(γ_(H B)^(s,p*))was quantified for the first time as 8.34 mN/m,significantly lower than that of COOH_(f)(γ_(f)^(s,p*)=34 mN/m).This result highlights that hydrogen bonding markedly reduces theγ^(s,p),providing a rational explanation for the relatively large water contact angle observed on PAA thin films.Furthermore,it establishes a thermodynamic basis for estimating the fraction of surface COOH_(H B)groups(f H B)from wettability measurements.Further extension of the model to carboxyl-terminated self-assembled monolayers(COOH-SAMs)revealed that surface COOH density(ΣCOOH)critically regulates wetting behavior:whenΣCOOH ranges from 4.30 to 5.25 nm^(-2),COOH groups predominantly exist in a free state and facilitate effective hydration layers,thereby promoting superhydrophilicity.Overall,this study not only establishes a unified thermodynamic framework linking surface COOH configurations to macroscopic wettability,but also validates its universality by extending it to COOH-SAMs systems,thereby providing a unified theoretical framework for the controllable design of hydrophilicity in various COOH-functionalized surfaces.
基金Supported by the Shanxi Province Grant(202203021212007,2023SHB003).
文摘Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for catalyst design and performance improvement in these applications.In this work,we systematically investigate the HPOR/HPRR mechanisms on low-index Pt surfaces,specifically Pt(111),Pt(100)and Pt(110),through density functional theory(DFT)calculations combined with the computational hydrogen electrode(CHE)model.For HPOR,all the low-index Pt surfaces exhibit a unified potential-determining step(PDS)involving the electrochemical oxidation of hydroperoxyl intermediates(HOO*).The binding free energy of HOO*(Δ_(GHOO*))emerges as an activity descriptor,with Pt(110)exhibiting the highest HPOR activity.The HPRR mechanism follows a chem-electrochemical(C-EC)pathway.The rate-determining step(RDS)of HPRR is either the cleavage of the HO-OH bond(chemical)or the reduction of HO(electrochemical),depending on their respective activation energies.These activation energies are functions of the HO*binding free energy,Δ_(GHO*),establishingΔ_(GHO*)as the descriptor for HPRR activity prediction.Pt(111)and Pt(100)are identified as the most active HPRR catalysts among the studied metal surfaces,although they still experience a significant overpotential.The scaling relationship betweenΔ_(GHOO*)andΔ_(GHO*)reveals a thermodynamic coupling of HPOR and HPRR,explaining their occurrence on Pt surfaces.These findings provide important insights and activity descriptors for both HPOR and HPRR,providing valuable guidance for the design of electrocatalysts in H_(2)O_(2)-related energy applications and fuel cells.
基金the Scientific and Technological Research Council of Türkiye(TÜBiTAK).
文摘This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by the patterns found on marine shells.The impacts of the parameters on wettability,Surface Free Energy(SFE),surface topography,and texture roughness generated by the laser beam tracking a spiral path were investigated.Reducing spiral pitch produces more complicated and chaotic surface patterns.Most surfaces are hydrophobic,and surface roughness and topography influence the Contact Angle(CA).Topography and roughness were affected by frequency and scanning speed;a decrease in scanning speed and frequency generated more chaotic and irregular surface textures.With general factorial analysis and Analysis of Variance(ANOVA),our statistical study reveals that accounting for 88%of the influence,the scanning speed is the primary factor influencing surface roughness.On the other hand,the spiral pitch is essential for defining the struc-tural features of the surface,even if it less influences roughness.The SFE of laser-textured CoCr28Mo alloy specimens was optimizable within the range of 14-32 mN/m.The relevant findings offer valuable insights into optimizing LST for the specific surface properties of the Co-based alloy.
基金financial support from the National Natural Science Foundation of China(No.52035012)the Guangdong Basic and Applied Basic Research Foundation(No.2025A1515012203)。
文摘The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.
文摘The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."
基金supported by the National Natural Science Foundation of China (52172228)the Natural Science Foundation of Fujian Province (2024J01475 and 2023J05127)
文摘Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.
基金supported by the Science and Technology Research Project of Henan Province(No.232102241014)the Key scientific research project of Henan Province Colleges and Universities(No.22A470002)Doctoral Fund Project of Henan Polytechnic University(No.B2021-37).
文摘This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experiments were conducted in a constant-temperature bath at a cold surface temperature of–5℃,relative humidity of 90%,and ambient air temperature of 10℃.The results reveal that the variation trends of frost morphology,frost mass,and frost layer thickness are generally consistent across surfaces with different wettability.Among the tested surfaces,frost crystal formation and complete surface coverage occurred latest on the superhydrophobic surface(CA=153.9–165.8℃),next on the bare aluminumsurface(75.3–83.2℃),and earliest on the hydrophilic surface(5.3–7.5℃).At the same frosting duration,the superhydrophobic surface exhibited a sparse and fluffy frost layer,the bare aluminum surface formed a rough and dense frost,while the hydrophilic surface developed a fine and compact frost layer.The amount of frost formation decreased in the order of hydrophilic>bare aluminum>superhydrophobic,indicating that the superhydrophobic surface provides the most significant anti-frosting effect during the initial stages of frost formation.For instance,on the Type A corrugated structure,after 15 min of frosting,the frost mass on the superhydrophobic surface was 38.78%and 68.45%lower than those on the bare aluminum and hydrophilic surfaces,respectively.After 30 min,these differences were 4.99%and 25.26%,respectively.Overall,the superhydrophobic surface exhibited the smallest frost mass and frost layer thickness,demonstrating superior anti-frosting performance compared with the other surface types.
基金Supported by the Key Program of the National Natural Science Foundation of China(No.82530034)the National Natural Science Foundation of China(No.82271054)the Nature Science Foundation of Xiamen,China(No.3502Z20227121).
文摘AIM:To investigate the impact of depression-like behavior on ocular surface homeostasis in a mouse model,with a focus on dry eye-like alterations.METHODS:Male C57BL/6J mice(10-12 weeks old)were randomly assigned to control or restraint stress(RS)groups.The RS group underwent three intermittent 24-hour restraint sessions to induce depressive-like behavior.Behavioral testing,tear secretion measurement,and corneal Oregon Green Dextran(OGD)staining were performed.Postmortem analyses included histological evaluation of lacrimal glands,goblet cell quantification using periodic acid-Schiff staining,and assessment of key inflammatory and apoptotic markers:interleukin(IL)-17,matrix metalloproteinases(MMP)-3,MMP-9,IL-13,interferon(IFN)-γ,and cleaved caspase-3 and-8.RESULTS:Repeated RS induced depression-like behavior and significant ocular surface changes.RStreated mice showed increased corneal OGD uptake and upregulation of gene/protein expression of IL-17,MMP-3,and MMP-9(P<0.05).Goblet cell density and IL-13 protein expression were reduced,while IFN-γprotein expression was elevated(P<0.05).Cleaved caspase-3 and-8 levels were significantly increased in both cornea and conjunctiva.Tear volume and lacrimal gland size were unchanged;however,mild inflammatory infiltration was observed in lacrimal glands.CONCLUSION:Repeated RS leads to ocular surface inflammation and dry eye-like pathology,including corneal barrier disruption,goblet cell loss,and epithelial apoptosis.These findings suggest that depression contributes to the pathogenesis of dry eye disease via immune-mediated mechanisms.
基金National Natural Science Foundation of China(Grant No.52278121).
文摘The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.
文摘BACKGROUND Dry eye disease(DED)is a multifactorial ocular surface disorder with rising prevalence.It is closely related to systemic health and psychological factors,such as sleep and mood disorders,which significantly impact the quality of life of patients.AIM To explore the correlations between ocular surface function,sleep quality,and anxiety/depression in patients with DED.METHODS This was a cross-sectional investigative study that included 358 patients with DED between January 2022 and January 2025.Ocular surface was assessed using the ocular surface disease index(OSDI),tear film break-up time,fluorescein staining score,and Schirmer I test.The Pittsburgh Sleep Quality Index(PSQI),Self-Rating Anxiety Scale(SAS),and Self-Rating Depression Scale(SDS)were used to evaluate sleep quality and anxiety/depression levels.Correlation and linear regression analyses were used to explore the relationships.RESULTS The mean PSQI score of the patients was 9.94±2.18;the mean SAS score was 47.30±4.90,and the mean SDS score was 50.08±5.52.These suggested a prevalence of sleep and psychological abnormalities.There was a significant correlation between the indicators of ocular surface function(OSDI,tear film break-up time,fluorescein staining,and Schirmer I test)and PSQI,SAS,and SDS scores(P<0.05).Moreover,multiple regression revealed that age≥50 years(β=1.55,P=0.029),PSQI scores(β=0.58,P<0.001),SAS scores(β=0.17,P=0.017),and SDS scores(β=0.15,P=0.019)were independent predictors of the OSDI scores.CONCLUSION Ocular surface function in patients with DED is closely related to sleep quality and anxiety/depression,emphasizing the need for holistic clinical management.
基金supported by the National Key R&D Program(No.2021YFB3501002)supported by the Ministry of Science and Technology of China,National Natural Science Foundation of China(No.51825101,52127801).
文摘Surface properties of crystals are critical in many fields,including electrochemistry and photoelectronics,the efficient prediction of which can expedite the design and optimization of catalysts,batteries,alloys etc.However,we are still far from realizing this vision due to the rarity of surface property-related databases,especially for multicomponent compounds,due to the large sample spaces and limited computing resources.In this work,we present a surface emphasized multi-task crystal graph convolutional neural network(SEM-CGCNN)to predict multiple surface properties simultaneously from crystal structures.The model is evaluated on a dataset of 3526 surface energies and work functions of binary magnesium intermetallics obtained through first-principles calculations,and obvious improvements are observed both in efficiency and accuracy over the original CGCNN model.By transferring the pre-trained model to the datasets of pure metals and other intermetallics,the fine-tuned SEM-CGCNN outperforms learning from scratch and can be further applied to other surface properties and materials systems.This study could be a paradigm for the end-to-end mapping of atomic structures to anisotropic surface properties of crystals,which provides an efficient framework to understand and screen materials with desired surface characteristics.
基金supported by the National Natural Science Foundation of China(Grant No.62475015)。
文摘With increasing awareness of myopia control,various preventive methods have been developed.In recent decades,a range of specialized spectacle lenses utilizing optical interventions has been manufactured and widely adopted for myopia management.However,the underlying optical mechanisms of these lenses remain unclear,and there is a lack of simulation methods for pre-manufacturing analysis.Meanwhile,the structures of these lenses are becoming increasingly complex,even incorporating an aspheric segment array on a curved base.To address these challenges,we have developed an efficient,accurate,and flexible modeling method for simulating such lenses,along with an experimental setup for validation.We provide deeper insights into the optical mechanisms of these lenses and establish a convenient design framework that facilitates the development of optimized lens structures.
基金supported by the National Natural Science Foundation of China(Nos.U2341249,12005076,22205112)the Fundamental Research Funds for the Central Universities(No.2025201012)。
文摘The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.
文摘Photodetectors can convert light energy into electrical signals,so are widely used in photovoltaics,photon counting,monitoring,and imaging.Photodetectors are easy to prepare high-resolution photochips because of their small size unit integration.However,these photodetector units often exhibit poor photoelectric performance due to material defects and inadequate structures,which greatly limit the functions of devices.Designing modification strategies and micro-/nanostructures can compensate for defects,adjust the bandgap,and develop novel quantum structures,which consequently optimize photovoltaic units and revolutionize optoelectronic devices.Here,this paper aims to comprehensively elaborate on the surface/interface engineering scheme of micro-/nano-photodetectors.It starts from the fundamentals of photodetectors,such as principles,types,and parameters,and describes the influence of material selection,manufacturing techniques,and post-processing.Then,we analyse in detail the great influence of surface/interface engineering on the performance of photovoltaic devices,including surface/interface modification and micro-/nanostructural design.Finally,the applications and prospects of optoelectronic devices in various fields such as miniaturization of electronic devices,robotics,and human–computer interaction are shown.
基金supported by the CAS Pioneer Hundred Talents Program and Second Tibetan Plateau Scientific Expedition Research Program(2019QZKK0708)as well as the Basic Research Program of Qinghai Province:Lithospheric Geomagnetic Field of the Qinghai-Tibet Plateau and the Relationship with Strong Earthquakes(2021-ZJ-969Q).
文摘The National Geophysical Data Center(NGDC)of the United States has collected aeromagnetic data for input into a series of geomagnetic models to improve model resolution;however,in the Tibetan Plateau region,ground-based observations remain insufficient to clearly reflect the characteristics of the region’s lithospheric magnetism.In this study,we evaluate the lithospheric magnetism of the Tibetan Plateau by using a 3D surface spline model based on observations from>200 newly constructed repeat stations(portable stations)to determine the spatial distribution of plateau geomagnetism,as well as its correlation with the tectonic features of the region.We analyze the relationships between M≥5 earthquakes and lithospheric magnetic field variations on the Tibetan Plateau and identify regions susceptible to strong earthquakes.We compare the geomagnetic results with those from an enhanced magnetic model(EMM2015)developed by the NGDC and provide insights into improving lithospheric magnetic field calculations in the Tibetan Plateau region.Further research reveals that these magnetic anomalies exhibit distinct differences from the magnetic-seismic correlation mechanisms observed in other tectonic settings;here,they are governed primarily by the combined effects of compressional magnetism,thermal magnetism,and deep thermal stress.This study provides new evidence of geomagnetic anomalies on the Tibetan Plateau,interprets them physically,and demonstrates their potential for identifying seismic hazard zones on the Plateau.
基金Wuxi University Research Start-up Fund for Introduced Talents(Grant No:2024r031)Technology Development Contract(Contract Registration Number:2024320205000963)+1 种基金National Natural Science Foundation of China(Grant No.52275288)Ningbo Key Research and Development Plan(Grant No.2023Z022).
文摘To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype was selected by Finite Element Method(FEM).In addition,the bionic parameters were optimized by Response Surface Method(RSM).Samples holding BNS were prepared by Laser Processing,tribological properties were tested by a Friction and Wear Tester and worn surface morphology was characterized by a Scanning Electron Microscope(SEM).The results showed that BNS on friction surface could regulate the stress distribution and alleviate the peak stress.Among all samples,the coupled texture of pit-hexagonal got the minimum peak stress.During braking,bionic texture could also collect wear debris or change the motion forms from sliding to rotation,which can reduce abnormal abrasion.The wear rate was reduced by 19.31%.The results in this paper can provide a new idea for enhancing the tribological properties of CBFMs,and can also lay the foundation for further research of bionic tribology.
文摘The Arno River Basin(Central Italy)is affected by a considerable anthropogenic pressure due to the presence of large cities and widespread industrial and agricultural practices.In this work,26 water samples from the Arno River and its main tributaries were analyzed to assess the water pollution status.The geochemical composition of the Arno River changes from the source(dominated by a Ca-HCO_(3) facies)to the mouth(where a Na-Cl(SO4)chemistry prevails)with an increasing quality deterioration,as suggested by the Chemical Water Quality Index,due to anthropogenic contributions and seawater intrusion before flowing into the Ligurian Sea.The Ombrone and Usciana tributaries introduce anthropogenic pollutants into the Arno River,whilst Elsa tributary supplies significant contents of geogenic sulfate.The concentrations of dissolved nitrate and nitrite(up to 63 and 9 mg/L,respectively)and the respective isotopic values of𝛿15N and𝛿18O were also determined to understand origin and fate of the N-species in the Arno River Basin surface waters.The combined application of𝛿15N-NO_(3) and𝛿18O-NO_(3) and N-source apportionment modelling allowed the identification of soil organic nitrogen and sewage and domestic wastes as primary sources for dissolved NO_(3)-.The𝛿15N-NO_(2) and𝛿18O-NO_(2) values suggest that the nitrification process affects the ARB waters,thus controlling the abundances and proportion of the N-species.Our work indicates that additional efforts are needed to improve management strategies to reduce the release of nitrogenated species to the surface waters of the Arno River Basin,since little progress has been made from the early 2000s.
文摘We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.
基金supported by the National Natural Science Foundation of China(No.11972357)。
文摘Crossflow instability will be present when the vehicle has an angle of attack in hypersonic flow,and it might play a dominant role in hypersonic boundary layer transition.By far the mechanism of crossflow instability-induced hypersonic boundary layer transition is still out of understanding,although the large effort has been devoted.Upon this work,the overall roughness effect on instabilities in hypersonic flow was researched experimentally.Surface flush-mounted pressure sensors and infrared camera were employed to investigate the instability waves when different rough surfaces were deployed.The results reveal that the moderate surface roughness level on cone model can suppress the growth of crossflow instabilities at certain azimuthal angles in hypersonic flow.
