In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were invest...In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were investigated by using a single factor variable method.The surface morphologies of the shell molds produced by different temperatures of the surface(first)layer slurries were observed via electron microscopy.Furthermore,the microscopic composition of these shell molds was obtained by EDS,and the osmotic effect of the slurry on the wax patterns at different temperatures was also assessed by the PZ-200 Contact Angle detector.The forming reasons for the surface cracks and holes of thick and large ZTC4 titanium alloy by investment casting were analyzed.The experimental results show that the surface of the shell molds prepared by the surface layer slurry with a low temperature exhibits noticeable damage,which is mainly due to the poor coating performance and the serious expansion and contraction of wax pattern at low temperatures.The second layer shell material(SiO_(2),Al_(2)O_(3))immerses into the crack area of the surface layer,contacts and reacts with the molten titanium to form surface cracks and holes in the castings.With the increase of the temperature of surface layer slurry,the damage to the shell surface tends to weaken,and the composition of the shell molds'surface becomes more uniform with less impurities.The results show that the surface layer slurry at 22℃is evenly coated on the surface of the wax patterns with appropriate thickness,and there is no surface shell mold rupture caused by sliding slurry after sand leaching.The surface layer slurry temperature is consistent with the wax pattern temperature and the workshop temperature,so there is no damage of the surface layer shell caused by expansion and contraction.Therefore,the shell mold prepared by the surface layer slurry at this temperature has good integrity,isolating the contact between the low inert shell material and the titanium liquid effectively,and the ZTC4 titanium alloy cylinder casting prepared by this shell mold is smooth,without cracks and holes.展开更多
Workpiece rotational grinding is widely used in the ultra-precision machining of hard and brittle semiconductor materials,including single-crystal silicon,silicon carbide,and gallium arsenide.Surface roughness and sub...Workpiece rotational grinding is widely used in the ultra-precision machining of hard and brittle semiconductor materials,including single-crystal silicon,silicon carbide,and gallium arsenide.Surface roughness and subsurface damage depth(SDD)are crucial indicators for evaluating the surface quality of these materials after grinding.Existing prediction models lack general applicability and do not accurately account for the complex material behavior under grinding conditions.This paper introduces novel models for predicting both surface roughness and SDD in hard and brittle semiconductor materials.The surface roughness model uniquely incorporates the material’s elastic recovery properties,revealing the significant impact of these properties on prediction accuracy.The SDD model is distinguished by its analysis of the interactions between abrasive grits and the workpiece,as well as the mechanisms governing stress-induced damage evolution.The surface roughness model and SDD model both establish a stable relationship with the grit depth of cut(GDC).Additionally,we have developed an analytical relationship between the GDC and grinding process parameters.This,in turn,enables the establishment of an analytical framework for predicting surface roughness and SDD based on grinding process parameters,which cannot be achieved by previous models.The models were validated through systematic experiments on three different semiconductor materials,demonstrating excellent agreement with experimental data,with prediction errors of 6.3%for surface roughness and6.9%for SDD.Additionally,this study identifies variations in elastic recovery and material plasticity as critical factors influencing surface roughness and SDD across different materials.These findings significantly advance the accuracy of predictive models and broaden their applicability for grinding hard and brittle semiconductor materials.展开更多
In Earth system modeling,the land surface is coupled with the atmosphere through surface turbulent fluxes.These fluxes are computed using mean meteorological variables between the surface and a reference height in the...In Earth system modeling,the land surface is coupled with the atmosphere through surface turbulent fluxes.These fluxes are computed using mean meteorological variables between the surface and a reference height in the atmosphere.However,the dependence of flux computation on the reference height,which is usually set as the lowest level in the atmosphere in Earth system models,has not received much attention.Based on high-resolution large-eddy simulation(LES)data under unstable conditions,we find the setting of reference height is not trivial within the framework of current surface layer theory.With a reasonable prescription of aerodynamic roughness length(following the setting in LESs),reference heights near the top of the surface layer tend to provide the best estimate of surface fluxes,especially for the momentum flux.Furthermore,this conclusion for the sensible heat flux is insensitive to the ratio of roughness length for momentum versus heat.These results are robust,whether using the classical or revised surface layer theory.They provide a potential guide for setting the proper reference heights for Earth system modeling and can be further tested in the near future using observational data from land–atmosphere feedback observatories.展开更多
This paper presents an investigation on the target-guided coordinated control(TACC)of unmanned surface vehicles(USVs).In the scenario of tracking non-cooperative targets,the status information of the target can only b...This paper presents an investigation on the target-guided coordinated control(TACC)of unmanned surface vehicles(USVs).In the scenario of tracking non-cooperative targets,the status information of the target can only be obtained by some USVs.In order to achieve semi-encirclement tracking of noncooperative targets under maritime security conditions,a fixed-time tracking control method based on dynamic surface control(DSC)is proposed in this paper.Firstly,a novel TACC architecture with decoupled kinematic control law and decoupled kinetic control law was designed to reduce the complexity of control system design.Secondly,the proposed DSC-based target-guided kinematic control law including tracking points pre-allocation strategy and sigmoid artificial potential functions(SigAPFs)can avoid collisions during tracking process and optimize kinematic control output.Finally,a fixed-time TACC system was proposed to achieve fast convergence of kinematic and kinetics errors.The effectiveness of the proposed TACC approach in improving target tracking safety and reducing control output chattering was verified by simulation comparison results.展开更多
The fatigue life of components can be significantly enhanced by the formation of the surface hardness layer through surface strengthening technology.To avoid the geometric distortion of thin-walled com-ponents caused ...The fatigue life of components can be significantly enhanced by the formation of the surface hardness layer through surface strengthening technology.To avoid the geometric distortion of thin-walled com-ponents caused by strengthening,the strengthening energy is limited and the ideal strengthening effect cannot be obtained.This work aims to propose a novel approach to address this issue effectively.The surface layer with high-density dislocations was obtained by a low-energy surface strengthening method(shot peening)at first.Then the surface strengthening mechanism changes from dislocation strengthen-ing to grain boundary strengthening after electropulsing treatment(EPT).The evolution of residual stress and microstructure was analyzed using multi-scale characterization techniques.The results demonstrate that EPT followed by surface strengthening makes a remarkable 304%increase in fatigue life of TC11 titanium alloy.The enhancement of fatigue life can be attributed to the grain refinement accompanied by the formation of nanotwins and sub-grains in the surface-strengthened layer,as well as the reduction in dislocation density within the substrate after EPT.This study demonstrates the significant potential of EPT in further enhancing the fatigue life of surface pre-strengthened thin-walled components.展开更多
The intrinsic antiferromagnetic topological insulators in the Mn-Bi-Te family,composed of superlattice-like MnBi_(2)Te_(4)/(Bi_(2)Te_(3))_(n)(n=0,1,2,3,...)layered structure,present intriguing states of matter such as...The intrinsic antiferromagnetic topological insulators in the Mn-Bi-Te family,composed of superlattice-like MnBi_(2)Te_(4)/(Bi_(2)Te_(3))_(n)(n=0,1,2,3,...)layered structure,present intriguing states of matter such as quantum anomalous Hall effect and the axion insulator.However,the surface state gap,which is the prerequisite for the observation of these states,remains elusive.Here by molecular beam epitaxy,we obtain two types of MnBi_(4)Te_(7)films with the exclusive Bi_(2)Te_(3)(BT)or MnBi_(2)Te_(4)(MBT)terminations.By scanning tunneling spectroscopy,the mass terms in the surface states are identified on both surface terminations.Experimental results reveal the existence of a hybridization gap of approximately 23 meV in surface states on the BT termination.This gap comes from the hybridization between the surface states and the spin-split states in the adjacent MBT layer.On the MBT termination,an exchange mass term of about 28±2 meV in surface states is identified by taking magnetic-field-dependent Landau level spectra as well as theoretical simulations.In addition,the mass term varies with the field in the film with a heavy BiMn doping level in the Mn layers.These findings demonstrate the existence of mass terms in surface states on both types of terminations in our epitaxial MnBi_(4)Te_(7)films investigated by local probes.展开更多
Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauc...Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauchlackierung).The wetting behaviour of adhesive on these surfaces and the resulting contact angles were analysed to evaluate bonding effectiveness.Design/methodology/approach–Primer paint was applied to glass fibre reinforced plastic(GFRP)materials and cataphoresis coating was applied to steel.Contact angles of the coated surfaces were measured and compared to those of the uncoated(natural)surfaces.Findings–Results showed that applying primer to GFRP and KTL to steel increased their surface energy compared to untreated surfaces.A decrease in contact angle correlated with improved wetting,suggesting enhanced adhesion potential.Originality/value–While the effects of surface coatings on adhesion have been studied,there is limited research specifically on the adhesion-enhancing potential of KTL coatings.Typically used for corrosion resistance,KTL is shown here to also improve adhesion.The novelty lies in experimentally demonstrating KTL’s dual role as both a protective and adhesion-enhancing layer.展开更多
While laser surface texturing(LST)is a promising manufacturing technique for surface functionalization,simultaneously realizing high precision and high efficiency in the LST of complex curved surface is challenging,du...While laser surface texturing(LST)is a promising manufacturing technique for surface functionalization,simultaneously realizing high precision and high efficiency in the LST of complex curved surface is challenging,due to continuously varied geometries of laser-matter incidence.In the present work,we propose a novel manufacturing system of 7-axis on-the-fly LST for complex curved surface,based on the integrated synchronization of 5-axis linkage motion platform with 2-axis galvanometer.Specifically,the algorithm for decomposing spatial texture trajectory on curved surface into low-frequency and high-frequency parts is established,based on which the kinematic model of synchronized 7-axis system is developed to derive the motion of each axis in both 5-axis linkage motion platform and 2-axis galvanometer simultaneously.Subsequently,the synchronized 7-axis LST system is experimentally realized,including the setup of mechanical stages integrated with optical path,the configuration of numerical control unit,and the development of processing software.Finally,case study of 7-axis on-the-fly LST of freeform aluminum surface is performed,and the advantages in terms of processing efficiency and texturing accuracy over 5-axis linkage LST are demonstrated.The correlation of reduced following errors between mechanical stages with the promoted performance of curved surface texturing by the 7-axis on-the-fly LST is further analyzed.Current work provides a feasible solution for establishing the manufacturing system for high performance LST of complex curved surface.展开更多
The title of the online version of the original article was revised.The title of the original article has been revised to:Hydrochemical characterization of surface waters in Northern Tehran:Integrating cluster-based t...The title of the online version of the original article was revised.The title of the original article has been revised to:Hydrochemical characterization of surface waters in Northern Tehran:Integrating cluster-based techniques with Self-Organizing Maps.展开更多
Utilizing superwettability micro/nanostructures to enhance the condensation heat transfer(CHT)performance of engineering materials has attracted great interest due to its values in basic research and technological inn...Utilizing superwettability micro/nanostructures to enhance the condensation heat transfer(CHT)performance of engineering materials has attracted great interest due to its values in basic research and technological innovations.Currently,exploring facile micro/nanofabrication approaches to create high-efficiency CHT surfaces has been one of research hotspots.In this work,we propose and demonstrate a type of new superwettability hybrid surface for high-efficiency CHT,which consists of superhydrophobic nanoneedle arrays and triangularly-patterned superhydrophilic microdots(SMDs).Such hybrid surface can be fabricated by the facile growth of densely-packed ZnO nanoneedles on the Zn-electroplated copper surface followed by fluorosilane modification and mask-assisted photodegradation.Through regulating the diameters and interspaces of SMDs,we obtain the optimized triangularly-patterned hybrid surface,which shows 42.7%higher CHT coefficient than the squarely-patterned hybrid surface and 58.5%higher CHT coefficient than the superhydrophobic surface.The key of such hybrid surface design is to considerably increase CHT coefficient brought about by SMD-triggered drop sweeping at the cost of slightly reducing heat transfer area of superhydrophobic functional zone for drop jumping.Such new strategy helps develop advanced CHT surfaces for high-efficiency electronic cooling and energy utilization.展开更多
Mantle plumes and surface erosion and sediment deposition affect the modes of continental lithospheric rupturing in extensional tectonic settings,modulating the evolution of rifting margins.However,their relative cont...Mantle plumes and surface erosion and sediment deposition affect the modes of continental lithospheric rupturing in extensional tectonic settings,modulating the evolution of rifting margins.However,their relative contributions to the overall evolution of rifting margins and possible roles in the formation of microcontinent are still elusive.Here,we use coupled geodynamic and surface processes numerical modeling to assess the extent to which surface processes may determine the formation of microcontinent during lithospheric stretching in presence or absence of a mantle plume underneath.Our modeling results indicate that fast extension rates and hillslope(i.e.,diffusion)erosion promote ridge jump events and therefore the formation of microcontinents.On the contrary,efficient fluvial erosion and far-reaching sediment transport(i.e.,stream power erosion)inhibits ridge jump events and the formation of microcontinents.The ridge jump event and overall evolution in our numerical models is consistent with the shift from the Mascarene Ridge to the Carlsberg Ridge that determined the formation of the Seychelles microcontinent.We therefore speculate that hillslope erosion,rather than fluvial erosion,was predominant during the formation of the Seychelles,a possible indication of overall dry local climate conditions.展开更多
Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attrac...Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attracted much attention^([1−3]).In 2023,Kyoto University reported GaAs-based 945 nm PCSELs with a continuous-wave(CW)single-mode output power of exceeding 50 W,and a narrow beam divergence angle of 0.05°,demonstrating a brightness of 1 GW·cm^(−2)·sr^(−1),which rivals those of the existing bulky lasers^([4]).展开更多
Nanomaterials have garnered recognition for their notable surface effects and demonstration of superior mechanical properties.Previous studies on the surface effects of nanomaterials,employing the finite element metho...Nanomaterials have garnered recognition for their notable surface effects and demonstration of superior mechanical properties.Previous studies on the surface effects of nanomaterials,employing the finite element method,often relied on simplified twodimensional models due to theoretical complexities.Consequently,these simplified models inadequately represent the mechanical properties of nanomaterials and fail to capture the substantial impact of surface effects,particularly the curvature dependence of nanosurfaces.This study applies the principle of minimum energy and leverages the Steigmann-Ogden surface theory of nanomaterials to formulate a novel finite element surface element that comprehensively accounts for surface effects.We conducted an analysis of the stress distribution and deformation characteristics of four typical 2D and 3D nanomaterial models.The accuracy of the developed surface element and finite element calculation method was verified through comparison with established references.The resulting finite element model provides a robust and compelling scientific approach for accurately predicting the mechanical performance of nanomaterials.展开更多
A D-type photonic crystal fiber(PCF) sensor based on surface plasmon resonance(SPR) principle is designed.In order to excite the SPR effect,a gold film is plated on the open-loop channel of the sensor,the free electro...A D-type photonic crystal fiber(PCF) sensor based on surface plasmon resonance(SPR) principle is designed.In order to excite the SPR effect,a gold film is plated on the open-loop channel of the sensor,the free electrons in a metal are resonated with photons.The structural parameters are fine-tuned and the sensing performance of the sensor is studied.The results show that the maximum spectral sensitivity reaches 18 000 nm/RIU in the refractive index range of 1.24—1.32,and the maximum resolution is 5.56×10^(-6) RIU.The novel structure with high sensitivity and low refractive index provides a new perspective for fluid density detection.展开更多
Underground coal mining induces significant surface deformation and environmental damage,particularly in deeply buried mining areas with thin bedrock and thick alluvial layers.Based on the case study of the Zhaogu No....Underground coal mining induces significant surface deformation and environmental damage,particularly in deeply buried mining areas with thin bedrock and thick alluvial layers.Based on the case study of the Zhaogu No.2 coal mine in Xinxiang City,Henan Province,China,this study employs a comprehensive research methodology,integrating field investigations,numerical simulations,and theoretical analyses,to explore the surface subsidence features at deeply buried mining areas with thin bedrock and thick alluvial layers,to reveal the effect of alluvial thickness on the surface subsidence characteristics.The findings indicate that the surface subsidence areas span 4.2 km2 with an advanced influence distance of 540 m.The rate of surface subsidence primarily depends on the panel's position and its advancing rate.Moreover,the thickness of the alluvial layer amplifies both the extent and magnitude of surface deformation.The displacement of overlying rock primarily exhibits a two-stage progression:the thin bedrock control stage and the alluvial control stage.In the thin bedrock control stage,surface subsidence initiates with relatively low subsidence values and amplitudes.Subsequently,in the alluvial control stage,surface subsidence accelerates,leading to a rapid increase in both subsidence values and amplitudes.These characteristics of rock formation displacement result in distinct phases of surface subsidence.Furthermore,the paper addresses the utilization of surface subsidence areas and proposes a method for calculating reservoir storage capacity in these areas.According to calculations,the storage capacity amounts to 1.05e7 m^(3).The research findings provide valuable insights into the surface subsidence laws in regions with similar geological conditions and practical implications for the management and utilization of subsided areas.展开更多
Aiming at the problems of low detection efficiency and difficult positioning of traditional steel surface defect detection methods,a lightweight steel surface defect detection model based on you only look once version...Aiming at the problems of low detection efficiency and difficult positioning of traditional steel surface defect detection methods,a lightweight steel surface defect detection model based on you only look once version 7(YOLOv7)is proposed.First,a cascading style sheets(CSS)block module is proposed,which uses more lightweight operations to obtain redundant information in the feature map,reduces the amount of computation,and effectively improves the detection speed.Secondly,the improved spatial pyramid pooling with cross stage partial convolutions(SPPCSPC)structure is adopted to ensure that the model can also pay attention to the defect location information while predicting the defect category information,obtain richer defect features.In addition,the convolution operation in the original model is simplified,which significantly reduces the size of the model and helps to improve the detection speed.Finally,using efficient intersection over union(EIOU)loss to focus on high-quality anchors,speed up convergence and improve positioning accuracy.Experiments were carried out on the Northeastern University-defect(NEU-DET)steel surface defect dataset.Compared with the original YOLOv7 model,the number of parameters of this model was reduced by 40%,the frames per second(FPS)reached 112,and the average accuracy reached 79.1%,the detection accuracy and speed have been improved,which can meet the needs of steel surface defect detection.展开更多
Electrocatalysis has been extensively explored for the storage and conversion of renewable electric power.Understanding the physisorption and chemisorption processes at electrified solid–liquid interfaces(ESLIs)is cr...Electrocatalysis has been extensively explored for the storage and conversion of renewable electric power.Understanding the physisorption and chemisorption processes at electrified solid–liquid interfaces(ESLIs)is crucial for revealing the typical surface restructuring and catalyst dissolution during electrocatalysis.Although advanced in situ tools and theoretical models have been proposed[1,2],identifying the nature of the active sites with atomic-scale spatial resolution remains a challenge,especially at ESLIs.In a recent work published in Nature,Zhang et al.[3]reported a groundbreaking atomic-resolution imaging of the structural dynamics of Cu nanowire catalysts in ESLIs for electrochemical CO_(2)reduction(ECR).展开更多
Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was d...Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.展开更多
Negative friction refers to a frictional force that acts in the same direction as the motion of an object, which has been predicted in terahertz(THz) gain systems [Phys. Rev. B 108 045406(2023)]. In this work, we inve...Negative friction refers to a frictional force that acts in the same direction as the motion of an object, which has been predicted in terahertz(THz) gain systems [Phys. Rev. B 108 045406(2023)]. In this work, we investigate the enhancement of the negative friction experienced by nanospheres placed near a graphene substrate. We find that the magnitude of negative friction is related to the resonant coupling between the surface plasmon polaritons(SPPs) of the graphene and localized surface phonon polaritons(LSPh P) of nanospheres. We exam nanospheres consisted of several different materials, including SiO_(2), Si C, Zn Se, Na Cl, ln Sb. Our results suggest that the LSPh P of Na Cl nanospheres match effectively with the amplified SPPs of graphene sheets. The negative friction for Na Cl nanospheres can be enhanced about one-to-two orders of magnitude compared to that of silica(SiO_(2)) nanospheres. At the resonant peak of negative friction, the required quasi-Fermi energy of graphene is lower for Na Cl nanospheres. Our finds hold great prospects for the mechanical manipulations of nanoscale particles.展开更多
The purpose of this article is to provide,from the perspective of deformable solid mechanics,a correct justification for the expressions of all forces acting on the surface of a ferromagnetic material in a magnetic fi...The purpose of this article is to provide,from the perspective of deformable solid mechanics,a correct justification for the expressions of all forces acting on the surface of a ferromagnetic material in a magnetic field,initiated only by this field.It is shown that the moment of force applied to any closed body surface S,corresponding to the asymmetric part TAof the stress tensor T(denoted as the force pA),balances the mass magnetic moment Lmagacting in the volume V bounded by the surface S.The emergence of the asymmetric part TAof the stress tensor arises as a consequence of a special case within the moment theory of elasticity,the use of which is necessary for accurately describing the behavior of a ferromagnetic material in a magnetic field.The force pa acts in a plane tangential to the surface S at any point,while,in addition to this force,the normal force pn also acts on the body surface.It is shown in the article that the latter force arises as a result of a jump in the normal component of the magnetic field strength appearing at the body surface,and its expression is defined by the mass' s(ponderomotive) magnetic forces Fmag.Usually,this force is introduced based on the Maxwell stress tensor,which is used in the classical electromagnetism to represent the interaction between electromagnetic forces and mechanical momentum.However,as we believe and justify this in the article,such an approach is unacceptable in deformable solid mechanics.展开更多
文摘In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were investigated by using a single factor variable method.The surface morphologies of the shell molds produced by different temperatures of the surface(first)layer slurries were observed via electron microscopy.Furthermore,the microscopic composition of these shell molds was obtained by EDS,and the osmotic effect of the slurry on the wax patterns at different temperatures was also assessed by the PZ-200 Contact Angle detector.The forming reasons for the surface cracks and holes of thick and large ZTC4 titanium alloy by investment casting were analyzed.The experimental results show that the surface of the shell molds prepared by the surface layer slurry with a low temperature exhibits noticeable damage,which is mainly due to the poor coating performance and the serious expansion and contraction of wax pattern at low temperatures.The second layer shell material(SiO_(2),Al_(2)O_(3))immerses into the crack area of the surface layer,contacts and reacts with the molten titanium to form surface cracks and holes in the castings.With the increase of the temperature of surface layer slurry,the damage to the shell surface tends to weaken,and the composition of the shell molds'surface becomes more uniform with less impurities.The results show that the surface layer slurry at 22℃is evenly coated on the surface of the wax patterns with appropriate thickness,and there is no surface shell mold rupture caused by sliding slurry after sand leaching.The surface layer slurry temperature is consistent with the wax pattern temperature and the workshop temperature,so there is no damage of the surface layer shell caused by expansion and contraction.Therefore,the shell mold prepared by the surface layer slurry at this temperature has good integrity,isolating the contact between the low inert shell material and the titanium liquid effectively,and the ZTC4 titanium alloy cylinder casting prepared by this shell mold is smooth,without cracks and holes.
基金supported by the National Key Research and Development Program of China(2022YFB3605902)the National Natural Science Foundation of China(52375411,52293402)。
文摘Workpiece rotational grinding is widely used in the ultra-precision machining of hard and brittle semiconductor materials,including single-crystal silicon,silicon carbide,and gallium arsenide.Surface roughness and subsurface damage depth(SDD)are crucial indicators for evaluating the surface quality of these materials after grinding.Existing prediction models lack general applicability and do not accurately account for the complex material behavior under grinding conditions.This paper introduces novel models for predicting both surface roughness and SDD in hard and brittle semiconductor materials.The surface roughness model uniquely incorporates the material’s elastic recovery properties,revealing the significant impact of these properties on prediction accuracy.The SDD model is distinguished by its analysis of the interactions between abrasive grits and the workpiece,as well as the mechanisms governing stress-induced damage evolution.The surface roughness model and SDD model both establish a stable relationship with the grit depth of cut(GDC).Additionally,we have developed an analytical relationship between the GDC and grinding process parameters.This,in turn,enables the establishment of an analytical framework for predicting surface roughness and SDD based on grinding process parameters,which cannot be achieved by previous models.The models were validated through systematic experiments on three different semiconductor materials,demonstrating excellent agreement with experimental data,with prediction errors of 6.3%for surface roughness and6.9%for SDD.Additionally,this study identifies variations in elastic recovery and material plasticity as critical factors influencing surface roughness and SDD across different materials.These findings significantly advance the accuracy of predictive models and broaden their applicability for grinding hard and brittle semiconductor materials.
基金supported by the Natural Science Foundation of China(Grant Nos.42088101 and 42375163)the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2021B0301030007)the specific research fund of The Innovation Platform for Academicians of Hainan Province(Grant No.YSPTZX202143)。
文摘In Earth system modeling,the land surface is coupled with the atmosphere through surface turbulent fluxes.These fluxes are computed using mean meteorological variables between the surface and a reference height in the atmosphere.However,the dependence of flux computation on the reference height,which is usually set as the lowest level in the atmosphere in Earth system models,has not received much attention.Based on high-resolution large-eddy simulation(LES)data under unstable conditions,we find the setting of reference height is not trivial within the framework of current surface layer theory.With a reasonable prescription of aerodynamic roughness length(following the setting in LESs),reference heights near the top of the surface layer tend to provide the best estimate of surface fluxes,especially for the momentum flux.Furthermore,this conclusion for the sensible heat flux is insensitive to the ratio of roughness length for momentum versus heat.These results are robust,whether using the classical or revised surface layer theory.They provide a potential guide for setting the proper reference heights for Earth system modeling and can be further tested in the near future using observational data from land–atmosphere feedback observatories.
文摘This paper presents an investigation on the target-guided coordinated control(TACC)of unmanned surface vehicles(USVs).In the scenario of tracking non-cooperative targets,the status information of the target can only be obtained by some USVs.In order to achieve semi-encirclement tracking of noncooperative targets under maritime security conditions,a fixed-time tracking control method based on dynamic surface control(DSC)is proposed in this paper.Firstly,a novel TACC architecture with decoupled kinematic control law and decoupled kinetic control law was designed to reduce the complexity of control system design.Secondly,the proposed DSC-based target-guided kinematic control law including tracking points pre-allocation strategy and sigmoid artificial potential functions(SigAPFs)can avoid collisions during tracking process and optimize kinematic control output.Finally,a fixed-time TACC system was proposed to achieve fast convergence of kinematic and kinetics errors.The effectiveness of the proposed TACC approach in improving target tracking safety and reducing control output chattering was verified by simulation comparison results.
基金supported by the National Nature Science Foun-dation of China(Grant No.50875061).
文摘The fatigue life of components can be significantly enhanced by the formation of the surface hardness layer through surface strengthening technology.To avoid the geometric distortion of thin-walled com-ponents caused by strengthening,the strengthening energy is limited and the ideal strengthening effect cannot be obtained.This work aims to propose a novel approach to address this issue effectively.The surface layer with high-density dislocations was obtained by a low-energy surface strengthening method(shot peening)at first.Then the surface strengthening mechanism changes from dislocation strengthen-ing to grain boundary strengthening after electropulsing treatment(EPT).The evolution of residual stress and microstructure was analyzed using multi-scale characterization techniques.The results demonstrate that EPT followed by surface strengthening makes a remarkable 304%increase in fatigue life of TC11 titanium alloy.The enhancement of fatigue life can be attributed to the grain refinement accompanied by the formation of nanotwins and sub-grains in the surface-strengthened layer,as well as the reduction in dislocation density within the substrate after EPT.This study demonstrates the significant potential of EPT in further enhancing the fatigue life of surface pre-strengthened thin-walled components.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1403102)the National Natural Science Foundation of China(Grant Nos.12474478,92065102,and 61804056).
文摘The intrinsic antiferromagnetic topological insulators in the Mn-Bi-Te family,composed of superlattice-like MnBi_(2)Te_(4)/(Bi_(2)Te_(3))_(n)(n=0,1,2,3,...)layered structure,present intriguing states of matter such as quantum anomalous Hall effect and the axion insulator.However,the surface state gap,which is the prerequisite for the observation of these states,remains elusive.Here by molecular beam epitaxy,we obtain two types of MnBi_(4)Te_(7)films with the exclusive Bi_(2)Te_(3)(BT)or MnBi_(2)Te_(4)(MBT)terminations.By scanning tunneling spectroscopy,the mass terms in the surface states are identified on both surface terminations.Experimental results reveal the existence of a hybridization gap of approximately 23 meV in surface states on the BT termination.This gap comes from the hybridization between the surface states and the spin-split states in the adjacent MBT layer.On the MBT termination,an exchange mass term of about 28±2 meV in surface states is identified by taking magnetic-field-dependent Landau level spectra as well as theoretical simulations.In addition,the mass term varies with the field in the film with a heavy BiMn doping level in the Mn layers.These findings demonstrate the existence of mass terms in surface states on both types of terminations in our epitaxial MnBi_(4)Te_(7)films investigated by local probes.
基金supported by the Sakarya University of Applied Sciences-Scientific Research Projects Coordination in the scope of master’s thesis Project under project number 285–2025.
文摘Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauchlackierung).The wetting behaviour of adhesive on these surfaces and the resulting contact angles were analysed to evaluate bonding effectiveness.Design/methodology/approach–Primer paint was applied to glass fibre reinforced plastic(GFRP)materials and cataphoresis coating was applied to steel.Contact angles of the coated surfaces were measured and compared to those of the uncoated(natural)surfaces.Findings–Results showed that applying primer to GFRP and KTL to steel increased their surface energy compared to untreated surfaces.A decrease in contact angle correlated with improved wetting,suggesting enhanced adhesion potential.Originality/value–While the effects of surface coatings on adhesion have been studied,there is limited research specifically on the adhesion-enhancing potential of KTL coatings.Typically used for corrosion resistance,KTL is shown here to also improve adhesion.The novelty lies in experimentally demonstrating KTL’s dual role as both a protective and adhesion-enhancing layer.
基金the support by the Harbin Manufacturing Science and Technology Innovation Talent Project(No.2023CXRCGD035)the Open Research Foundation of State Key Laboratory of Digital Manufacturing Equipment and Technology in Huazhong University of Science and Technology,China(No.IMETKF2023012).
文摘While laser surface texturing(LST)is a promising manufacturing technique for surface functionalization,simultaneously realizing high precision and high efficiency in the LST of complex curved surface is challenging,due to continuously varied geometries of laser-matter incidence.In the present work,we propose a novel manufacturing system of 7-axis on-the-fly LST for complex curved surface,based on the integrated synchronization of 5-axis linkage motion platform with 2-axis galvanometer.Specifically,the algorithm for decomposing spatial texture trajectory on curved surface into low-frequency and high-frequency parts is established,based on which the kinematic model of synchronized 7-axis system is developed to derive the motion of each axis in both 5-axis linkage motion platform and 2-axis galvanometer simultaneously.Subsequently,the synchronized 7-axis LST system is experimentally realized,including the setup of mechanical stages integrated with optical path,the configuration of numerical control unit,and the development of processing software.Finally,case study of 7-axis on-the-fly LST of freeform aluminum surface is performed,and the advantages in terms of processing efficiency and texturing accuracy over 5-axis linkage LST are demonstrated.The correlation of reduced following errors between mechanical stages with the promoted performance of curved surface texturing by the 7-axis on-the-fly LST is further analyzed.Current work provides a feasible solution for establishing the manufacturing system for high performance LST of complex curved surface.
文摘The title of the online version of the original article was revised.The title of the original article has been revised to:Hydrochemical characterization of surface waters in Northern Tehran:Integrating cluster-based techniques with Self-Organizing Maps.
基金supported by National Natural Science Foundation of China(No.21573276)Natural Science Foundation of Jiangsu Province(No.BK20170007)Jiangsu Funding Program for Excellent Postdoctoral Talent(No.2022ZB846).
文摘Utilizing superwettability micro/nanostructures to enhance the condensation heat transfer(CHT)performance of engineering materials has attracted great interest due to its values in basic research and technological innovations.Currently,exploring facile micro/nanofabrication approaches to create high-efficiency CHT surfaces has been one of research hotspots.In this work,we propose and demonstrate a type of new superwettability hybrid surface for high-efficiency CHT,which consists of superhydrophobic nanoneedle arrays and triangularly-patterned superhydrophilic microdots(SMDs).Such hybrid surface can be fabricated by the facile growth of densely-packed ZnO nanoneedles on the Zn-electroplated copper surface followed by fluorosilane modification and mask-assisted photodegradation.Through regulating the diameters and interspaces of SMDs,we obtain the optimized triangularly-patterned hybrid surface,which shows 42.7%higher CHT coefficient than the squarely-patterned hybrid surface and 58.5%higher CHT coefficient than the superhydrophobic surface.The key of such hybrid surface design is to considerably increase CHT coefficient brought about by SMD-triggered drop sweeping at the cost of slightly reducing heat transfer area of superhydrophobic functional zone for drop jumping.Such new strategy helps develop advanced CHT surfaces for high-efficiency electronic cooling and energy utilization.
基金financially supported by the National Science Foundation of China(No.41920104010)the China Postdoctoral Science Foundation(No.2024M762767)+3 种基金the Fundamental Research Funds for the Central University,CHD(No.300102264104)by the Postdoctoral Fellowship Program of CPSF(No.GZC20241444)supported by Fondazione Cariplo and Fondazione CDP(No.2022-1546_001)by the Italian Ministry of Education,MUR(Project Dipartimenti di Eccellenza,TECLA,Department of Earth and Environmental Sciences,University of Milano-Bicocca)。
文摘Mantle plumes and surface erosion and sediment deposition affect the modes of continental lithospheric rupturing in extensional tectonic settings,modulating the evolution of rifting margins.However,their relative contributions to the overall evolution of rifting margins and possible roles in the formation of microcontinent are still elusive.Here,we use coupled geodynamic and surface processes numerical modeling to assess the extent to which surface processes may determine the formation of microcontinent during lithospheric stretching in presence or absence of a mantle plume underneath.Our modeling results indicate that fast extension rates and hillslope(i.e.,diffusion)erosion promote ridge jump events and therefore the formation of microcontinents.On the contrary,efficient fluvial erosion and far-reaching sediment transport(i.e.,stream power erosion)inhibits ridge jump events and the formation of microcontinents.The ridge jump event and overall evolution in our numerical models is consistent with the shift from the Mascarene Ridge to the Carlsberg Ridge that determined the formation of the Seychelles microcontinent.We therefore speculate that hillslope erosion,rather than fluvial erosion,was predominant during the formation of the Seychelles,a possible indication of overall dry local climate conditions.
基金funded by National Key R&D Program of China(Grant Nos.2024YFB3612200,2023YFB3609601,2022YFB3604300,2022YFB2802801,2022YFB3604802)Natural Science Foundation of China(Grant Nos.U24A20300,62174174,62274177,62275263,62325406,62374172,62304242,62304240,62404241)+4 种基金Youth Innovation Promotion Association of CAS(Grant Nos.2022323 and 2022324)Key R&D Program of Jiangsu Province(Grant No.BE2023018-2)Basic Research Program of Jiangsu(Grant No.BK20240126)Suzhou Science and Technology Program(Grant Nos.SYC2022089,ZXL2024379,and ZXL2024376)Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2022A1515110482 and 2022A1515110004).
文摘Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attracted much attention^([1−3]).In 2023,Kyoto University reported GaAs-based 945 nm PCSELs with a continuous-wave(CW)single-mode output power of exceeding 50 W,and a narrow beam divergence angle of 0.05°,demonstrating a brightness of 1 GW·cm^(−2)·sr^(−1),which rivals those of the existing bulky lasers^([4]).
基金supported by the Jiangsu Funding Program for Excellent Postdoctoral Talent (Grant No.2023ZB397)the Project funded by China Postdoctoral Science Foundation (Grant No.2023M732986).
文摘Nanomaterials have garnered recognition for their notable surface effects and demonstration of superior mechanical properties.Previous studies on the surface effects of nanomaterials,employing the finite element method,often relied on simplified twodimensional models due to theoretical complexities.Consequently,these simplified models inadequately represent the mechanical properties of nanomaterials and fail to capture the substantial impact of surface effects,particularly the curvature dependence of nanosurfaces.This study applies the principle of minimum energy and leverages the Steigmann-Ogden surface theory of nanomaterials to formulate a novel finite element surface element that comprehensively accounts for surface effects.We conducted an analysis of the stress distribution and deformation characteristics of four typical 2D and 3D nanomaterial models.The accuracy of the developed surface element and finite element calculation method was verified through comparison with established references.The resulting finite element model provides a robust and compelling scientific approach for accurately predicting the mechanical performance of nanomaterials.
基金supported by the Natural Science Foundation of Tianjin City (No.19JCYBJC17000)the National Natural Science Foundation of China (No.11905159)。
文摘A D-type photonic crystal fiber(PCF) sensor based on surface plasmon resonance(SPR) principle is designed.In order to excite the SPR effect,a gold film is plated on the open-loop channel of the sensor,the free electrons in a metal are resonated with photons.The structural parameters are fine-tuned and the sensing performance of the sensor is studied.The results show that the maximum spectral sensitivity reaches 18 000 nm/RIU in the refractive index range of 1.24—1.32,and the maximum resolution is 5.56×10^(-6) RIU.The novel structure with high sensitivity and low refractive index provides a new perspective for fluid density detection.
基金supported by the National Natural Science Foundation of China(Grant Nos.5193400852374106+5 种基金5220416352404159)China Postdoctoral Science Foundation(Grant no.2024T171006)the Fundamental Research Funds for the Central Universities(Grant Nos.2024ZKPYNY042023ZKPYNY012023YQTD02)。
文摘Underground coal mining induces significant surface deformation and environmental damage,particularly in deeply buried mining areas with thin bedrock and thick alluvial layers.Based on the case study of the Zhaogu No.2 coal mine in Xinxiang City,Henan Province,China,this study employs a comprehensive research methodology,integrating field investigations,numerical simulations,and theoretical analyses,to explore the surface subsidence features at deeply buried mining areas with thin bedrock and thick alluvial layers,to reveal the effect of alluvial thickness on the surface subsidence characteristics.The findings indicate that the surface subsidence areas span 4.2 km2 with an advanced influence distance of 540 m.The rate of surface subsidence primarily depends on the panel's position and its advancing rate.Moreover,the thickness of the alluvial layer amplifies both the extent and magnitude of surface deformation.The displacement of overlying rock primarily exhibits a two-stage progression:the thin bedrock control stage and the alluvial control stage.In the thin bedrock control stage,surface subsidence initiates with relatively low subsidence values and amplitudes.Subsequently,in the alluvial control stage,surface subsidence accelerates,leading to a rapid increase in both subsidence values and amplitudes.These characteristics of rock formation displacement result in distinct phases of surface subsidence.Furthermore,the paper addresses the utilization of surface subsidence areas and proposes a method for calculating reservoir storage capacity in these areas.According to calculations,the storage capacity amounts to 1.05e7 m^(3).The research findings provide valuable insights into the surface subsidence laws in regions with similar geological conditions and practical implications for the management and utilization of subsided areas.
基金supported by the National Natural Science Foundation of China(No.62103298)the Natural Science Foundation of Hebei Province(No.F2018209289)。
文摘Aiming at the problems of low detection efficiency and difficult positioning of traditional steel surface defect detection methods,a lightweight steel surface defect detection model based on you only look once version 7(YOLOv7)is proposed.First,a cascading style sheets(CSS)block module is proposed,which uses more lightweight operations to obtain redundant information in the feature map,reduces the amount of computation,and effectively improves the detection speed.Secondly,the improved spatial pyramid pooling with cross stage partial convolutions(SPPCSPC)structure is adopted to ensure that the model can also pay attention to the defect location information while predicting the defect category information,obtain richer defect features.In addition,the convolution operation in the original model is simplified,which significantly reduces the size of the model and helps to improve the detection speed.Finally,using efficient intersection over union(EIOU)loss to focus on high-quality anchors,speed up convergence and improve positioning accuracy.Experiments were carried out on the Northeastern University-defect(NEU-DET)steel surface defect dataset.Compared with the original YOLOv7 model,the number of parameters of this model was reduced by 40%,the frames per second(FPS)reached 112,and the average accuracy reached 79.1%,the detection accuracy and speed have been improved,which can meet the needs of steel surface defect detection.
基金financially supported by the Natural Science Foundation of Shandong(ZR2023ME014)。
文摘Electrocatalysis has been extensively explored for the storage and conversion of renewable electric power.Understanding the physisorption and chemisorption processes at electrified solid–liquid interfaces(ESLIs)is crucial for revealing the typical surface restructuring and catalyst dissolution during electrocatalysis.Although advanced in situ tools and theoretical models have been proposed[1,2],identifying the nature of the active sites with atomic-scale spatial resolution remains a challenge,especially at ESLIs.In a recent work published in Nature,Zhang et al.[3]reported a groundbreaking atomic-resolution imaging of the structural dynamics of Cu nanowire catalysts in ESLIs for electrochemical CO_(2)reduction(ECR).
基金supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province (No. 1003016001)。
文摘Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11804288)the Key Scientific Research Project of Higher Education Institutions in Henan Province, China (Grant No. 20231205164502999)。
文摘Negative friction refers to a frictional force that acts in the same direction as the motion of an object, which has been predicted in terahertz(THz) gain systems [Phys. Rev. B 108 045406(2023)]. In this work, we investigate the enhancement of the negative friction experienced by nanospheres placed near a graphene substrate. We find that the magnitude of negative friction is related to the resonant coupling between the surface plasmon polaritons(SPPs) of the graphene and localized surface phonon polaritons(LSPh P) of nanospheres. We exam nanospheres consisted of several different materials, including SiO_(2), Si C, Zn Se, Na Cl, ln Sb. Our results suggest that the LSPh P of Na Cl nanospheres match effectively with the amplified SPPs of graphene sheets. The negative friction for Na Cl nanospheres can be enhanced about one-to-two orders of magnitude compared to that of silica(SiO_(2)) nanospheres. At the resonant peak of negative friction, the required quasi-Fermi energy of graphene is lower for Na Cl nanospheres. Our finds hold great prospects for the mechanical manipulations of nanoscale particles.
基金supported by the Ministry of Science and Higher Education of the Russian Federation(No.075-15-2024-535)。
文摘The purpose of this article is to provide,from the perspective of deformable solid mechanics,a correct justification for the expressions of all forces acting on the surface of a ferromagnetic material in a magnetic field,initiated only by this field.It is shown that the moment of force applied to any closed body surface S,corresponding to the asymmetric part TAof the stress tensor T(denoted as the force pA),balances the mass magnetic moment Lmagacting in the volume V bounded by the surface S.The emergence of the asymmetric part TAof the stress tensor arises as a consequence of a special case within the moment theory of elasticity,the use of which is necessary for accurately describing the behavior of a ferromagnetic material in a magnetic field.The force pa acts in a plane tangential to the surface S at any point,while,in addition to this force,the normal force pn also acts on the body surface.It is shown in the article that the latter force arises as a result of a jump in the normal component of the magnetic field strength appearing at the body surface,and its expression is defined by the mass' s(ponderomotive) magnetic forces Fmag.Usually,this force is introduced based on the Maxwell stress tensor,which is used in the classical electromagnetism to represent the interaction between electromagnetic forces and mechanical momentum.However,as we believe and justify this in the article,such an approach is unacceptable in deformable solid mechanics.
