In current China, the main problem existing in the rural public goods supplying system is the unbalanced condition of public goods supply, and the chief reason for which is unitary system of supply main body. Thus the...In current China, the main problem existing in the rural public goods supplying system is the unbalanced condition of public goods supply, and the chief reason for which is unitary system of supply main body. Thus the leading countermeasure for comer of public goods supply is to reform the present unitary rural public goods supplying system, to strengthen functional transfer of rural grass-roots directive organization, to adopt diversified mode and provide public goods on the base of overall planning of urban and rural areas and to implement unitary and diversified supplying strategy. In this way, supplying efficiency of the rural public goods will be improved.展开更多
Following a magnitude M 7.9 earthquake that struck near Mandalay,Myanmar in March 2025,this study investigates the seismic damage inflicted upon the city’s municipal water supply system.The analysis focuses on the fa...Following a magnitude M 7.9 earthquake that struck near Mandalay,Myanmar in March 2025,this study investigates the seismic damage inflicted upon the city’s municipal water supply system.The analysis focuses on the failure characteristics of water facilities and pipelines,examines cross-system cascading effects,and proposes corresponding recovery strategies.The main findings are as follows:(1)The damage to water plant facilities,concentrated in ancillary structures and connections due to insufficient seismic measures,demonstrated significant intensity-dependence.Increased seismic intensity not only aggravated structural damage but also compromised core treatment processes,leading to deteriorated water quality.(2)Within the same seismic intensity zone,high-density polyethylene(HDPE)pipes exhibited a significantly lower damage occurrence rate than ductile iron(DI)pipes,highlighting the material’s substantial influence on seismic performance.Moreover,a strong positive correlation was observed between the overall pipeline network damage and the seismic intensity.The average damage rate in IntensityⅨzones was 6.84 times that of IntensityⅧzones.(3)A cascading failure,initiated by a power outage,led to water supply disruption,loss of emergency response capability,and elevated secondary risks.This strongly coupled cross-system effect resulted in significant spatiotemporal propagation of disaster impacts.(4)The post-earthquake recovery adopted a phased strategy that prioritized critical facilities.Actions involved rapidly restoring the core supply zone with temporary points,reinstating the water plant’s power supply,and deploying targeted technologies for efficient pipeline repair.The outcomes of this study are expected to provide critical support and a valuable reference for developing earthquake-resilient urban water supply systems.展开更多
A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However...A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.展开更多
The liquid nitrogen(LN2)supplying system,one of the four key systems of the cryogenic wind tunnel(CWT),is an essential guarantee for the precise control,fast and safe regulation of the wind tunnel’s total temperature...The liquid nitrogen(LN2)supplying system,one of the four key systems of the cryogenic wind tunnel(CWT),is an essential guarantee for the precise control,fast and safe regulation of the wind tunnel’s total temperature.Firstly,the technical schemes,advantages and disadvantages of different LN2 supplying systems are discussed and analyzed based on the operation conditions and test requirements of different CWTs.Then,together with the development of the pilot cryogenic transonic wind tunnel(PCTW),the key technologies of the system,including the supplying mode,rapid and accurate regulation of injection pressure,development of large scale cryogenic centrifugal pump,and matching technology between pumps and pipe network,have been summarized and the solutions to the existing issues are given.Finally,a supplying process suitable for large-scale CWT is proposed,which has the ability of independent commissioning,rapid regulation,accurate control of injection pressure and transient response to the wind tunnel’s wide range of working conditions.The breakthrough in LN2 supplying system enables China to construct a CWT for the future competitive high Reynolds number aircraft.展开更多
Transgression networks in metropolitan centers need to supply a large quantity of power in a reliable manner to vital loads that are located within. A transmission network supplying such an important area must have a ...Transgression networks in metropolitan centers need to supply a large quantity of power in a reliable manner to vital loads that are located within. A transmission network supplying such an important area must have a high standard of reliability. Therefore, those transmission systems require a special form of redundancy in order to prevent sustained outages after severe contingencies such as multiple faults. This paper outlines different forms of redundancy, and the fundamental options for designing a metropolitan network based on different forms of redundancy are illustrated. Relative merits and drawbacks of network designs based on each form of redundancy are also shown.展开更多
Background: The availability of essential medicines and medical supplies is crucial for effectively delivering healthcare services. In Zambia, the Logistics Management Information System (LMIS) is a key tool for manag...Background: The availability of essential medicines and medical supplies is crucial for effectively delivering healthcare services. In Zambia, the Logistics Management Information System (LMIS) is a key tool for managing the supply chain of these commodities. This study aimed to evaluate the effectiveness of LMIS in ensuring the availability of essential medicines and medical supplies in public hospitals in the Copperbelt Province of Zambia. Materials and Methods: From February to April 2022, a cross-sectional study was conducted in 12 public hospitals across the Copperbelt Province. Data were collected using structured questionnaires, checklists, and stock control cards. The study assessed LMIS availability, training, and knowledge among pharmacy personnel, as well as data accuracy, product availability, and order fill rates. Descriptive statistics were used to analyse the data. Results: All surveyed hospitals had LMIS implemented and were using eLMIS as the primary LMIS. Only 47% and 48% of pharmacy personnel received training in eLMIS and Essential Medicines Logistics Improvement Program (EMLIP), respectively. Most personnel demonstrated good knowledge of LMIS, with 77.7% able to log in to eLMIS Facility Edition, 76.6% able to locate stock control cards in the system, and 78.7% able to perform transactions. However, data accuracy from physical and electronic records varied from 0% to 60%, and product availability ranged from 50% to 80%. Order fill rates from Zambia Medicines and Medical Supplies Agency (ZAMMSA) were consistently below 30%. Discrepancies were observed between physical stock counts and eLMIS records. Conclusion: This study found that most hospitals in the Copperbelt Province of Zambia have implemented LMIS use. While LMIS implementation is high in the Copperbelt Province of Zambia, challenges such as low training levels, data inaccuracies, low product availability, and order fill rates persist. Addressing these issues requires a comprehensive approach, including capacity building, data quality improvement, supply chain coordination, and investment in infrastructure and human resources. Strengthening LMIS effectiveness is crucial for improving healthcare delivery and patient outcomes in Zambia.展开更多
For any country,the availability of electricity is crucial to the development of the national economy and society.As a result,decision-makers and policy-makers can improve the sustainability and security of the energy...For any country,the availability of electricity is crucial to the development of the national economy and society.As a result,decision-makers and policy-makers can improve the sustainability and security of the energy supply by implementing a variety of actions by using the evaluation of these factors as an early warning system.This research aims to provide a multi-criterion decision-making(MCDM)method for assessing the sustainability and security of the electrical supply.The weights of criteria,which indicate their relative relevance in the assessment of the sustainability and security of the energy supply,the MCDM method allow users to express their opinions.To overcome the impact of uncertainty and vagueness of expert opinion,we explore the notion of picture fuzzy theory,which is a more efficient and dominant mathematical model.Recently,the theory of Aczel-Alsina operations has attained a lot of attraction and has an extensive capability to acquire smooth approximated results during the aggregation process.However,Choquet integral operators are more flexible and are used to express correlation among different attributes.This article diagnoses an innovative theory of picture fuzzy set to derive robust mathematical methodologies of picture fuzzy Choquet Integral Aczel-Alsina aggregation operators.To prove the intensity and validity of invented approaches,some dominant properties and special cases are also discussed.An intelligent decision algorithm for the MCDM problem is designed to resolve complicated real-life applications under multiple conflicting criteria.Additionally,we discussed a numerical example to investigate a suitable electric transformer under consideration of different beneficial key criteria.A comparative study is established to capture the superiority and effectiveness of pioneered mathematical approaches with existing methodologies.展开更多
Rice straw,a by-product of rice cultivation,is commonly disposed of through open-field burning,which contributes to air pollution and environmental degradation.This study aims to identify the key factors influencing f...Rice straw,a by-product of rice cultivation,is commonly disposed of through open-field burning,which contributes to air pollution and environmental degradation.This study aims to identify the key factors influencing farmers’decisions on rice straw management and to develop policy recommendations that encourage the sustainable utilization of rice straw within the supply chain.A mixed-methods approach was adopted,combining qualitative interviews with nine key informants and a quantitative survey of 585 rice farmers across Thailand.Multinomial Logit Regression(MLR)was employed to analyze farmers’preferences among four management options:burning,composting,animal feeding,and selling.The results reveal that membership in farmer groups,ownership of livestock,access to baling machinery,knowledge,and skills related to straw utilization,ease of field access,availability of storage facilities,engagement in integrated farming,and year-round access to baling services significantly increased the likelihood of choosing sustainable alternatives over the burning straw.These findings underscore the importance of both capacity-building and infrastructure in enabling sustainable practices.Based on these insights,the study proposes a multi-level policy framework to enhance the value creation of rice straw.National policies should focus on expanding access to machinery and supporting innovation,while local governments should facilitate farmer training and improve straw logistics.Strengthening farmer organizations and market connections is also crucial for scaling adoption.Overall,structural integration and stakeholder coordination are key to reducing straw burning and promoting sustainable resource use in rice-producing regions.展开更多
Purpose–Adding an appropriate pre-sag to the geometry of simple catenary systems for electric railways can improve their performance in dynamic interaction with the pantographs of trains operating under them.The valu...Purpose–Adding an appropriate pre-sag to the geometry of simple catenary systems for electric railways can improve their performance in dynamic interaction with the pantographs of trains operating under them.The value of pre-sag can be obtained by empirical approximation or computationally expensive optimisation.This study aims to define a simple but accurate method to determine a suitable pre-sag without dynamic simulations and to find its limitations.Design/methodology/approach–A quasi-static method to determine the ideal value of pre-sag is described based on elasticity variations.It considers variations of the static contact force.The limits of this method are investigated by comparing it to a parametric dynamic simulation study.In the dynamic simulation,an optimal level of pre-sag is identified for each contact force level.The influence of the speed in the dynamic simulation results is expressed in two parameters:the quasi-static influence in the mean contact force and the dynamic influence in the ratio between the vehicle speed and the wave propagation speed in the contact wire.Findings–The comparison between the suggested method and the dynamic simulations shows a high consistency up to a speed limit of around 40%of the wave propagation speed.The best agreement with the dynamic results is achieved by calculating the optimal pre-sag based on the absolute elasticity variation.Practical implications–The simplified approach for determining the pre-sag is valid for low-speed applications,such as suburban railway lines.For these cases,a highly suitable geometry can be obtained with the suggested method,meaning a significantly reduced computational effort.As a case study for this work,the results are applied to a Swedish suburban rail line upgrade case.Originality/value–The static uplift force is added as a varied parameter in dynamic simulations.The shift in system behaviour from low to high dynamics is described,and how the benefits from pre-sag are visible and then disappear.The limit value of the low-dynamics regime is identified to be 40%.展开更多
Traditional supply chain finance has problems in four aspects:business flow,logistics,capital flow,and information flow.Blockchain technologies such as smart contracts and consensus mechanisms can help break through t...Traditional supply chain finance has problems in four aspects:business flow,logistics,capital flow,and information flow.Blockchain technologies such as smart contracts and consensus mechanisms can help break through the above problems.They can improve the implementation effect of supply chain finance,and reduce risks.Based on blockchain technology,this paper constructs a multi-dimensional dynamic supply chain financial risk control system.The system includes multi-dimensional dynamic supply chain financial risk control technology,a credit evaluation system,and a capital monitoring and early warning system.By constructing a multi-dimensional dynamic supply chain financial risk control system,effective risk complete monitoring and penetrating supervision can be achieved.At the same time,this paper introduces technologies such as machine learning and deep learning to build an effective risk control system,which is of great significance for reducing supply chain financial risks.展开更多
Critical for metering and protection in electric railway traction power supply systems(TPSSs),the measurement performance of voltage transformers(VTs)must be timely and reliably monitored.This paper outlines a three-s...Critical for metering and protection in electric railway traction power supply systems(TPSSs),the measurement performance of voltage transformers(VTs)must be timely and reliably monitored.This paper outlines a three-step,RMS data only method for evaluating VTs in TPSSs.First,a kernel principal component analysis approach is used to diagnose the VT exhibiting significant measurement deviations over time,mitigating the influence of stochastic fluctuations in traction loads.Second,a back propagation neural network is employed to continuously estimate the measurement deviations of the targeted VT.Third,a trend analysis method is developed to assess the evolution of the measurement performance of VTs.Case studies conducted on field data from an operational TPSS demonstrate the effectiveness of the proposed method in detecting VTs with measurement deviations exceeding 1%relative to their original accuracy levels.Additionally,the method accurately tracks deviation trends,enabling the identification of potential early-stage faults in VTs and helping prevent significant economic losses in TPSS operations.展开更多
Existing studies have mostly focused on sustainable intensification(SI)in agricultural systems,while neglecting the integrated analysis of SI for the land space utilization system(LSUS).This has resulted in a lack of ...Existing studies have mostly focused on sustainable intensification(SI)in agricultural systems,while neglecting the integrated analysis of SI for the land space utilization system(LSUS).This has resulted in a lack of systematic solutions in balancing sustainable resource utilization and environmental protection.This study reviewed SI's conceptual framework and evaluation,identified the gaps,and proposed an analytical framework of SI with clear logic and modeling processes for LSUS.Key findings include:(1)Resource competition and ecosystem pressures have highlighted the need to extend traditional agriculture-focused SI to LSUS and establish a clear quantitative evaluation framework for SI;(2)SI for LSUS refers to a system state in which a specific sub-system produces its dominant functions with resource savings,reduced environmental impact,efficient function output,and stable/enhanced function provision,while sub-systems evolve in a coordinated and orderly manner;(3)The assessment framework of SI for LSUS clarifies modeling processes,suggested indicators,methods and scale hierarchy system to help policymakers identify SI priorities across scales,informing strategies to balance agricultural,socioeconomic,and ecosystem goals.This study overcomes the limitations of traditional SI,providing crucial insights for tracking SI performance and identifying barriers in LSUS to enlighten the sustainable land use and management practices.展开更多
Hydraulic control valves, positioned at the terminus of pipe networks, are critical for regulatingflow and pressure, thereby ensuring the operational safety and efficiency of pipeline systems. However,conventional val...Hydraulic control valves, positioned at the terminus of pipe networks, are critical for regulatingflow and pressure, thereby ensuring the operational safety and efficiency of pipeline systems. However,conventional valve designs often struggle to maintain effective regulation across a wide range of systempressures. To address this limitation, this study introduces a novel Pilot hydraulic valves specificallyengineered for enhanced dynamic performance and precise regulation under variable pressure conditions.Building upon prior experimental findings, the proposed design integrates a high-fidelity simulationframework and a surrogate model-based optimization strategy. The study begins by formulating acomprehensive mathematical model of the pipeline system using electro-hydraulic simulation techniques,capturing the dynamic behavior of both the pilot valve and the broader urban water distribution network. Acoupled simulation platform is then developed, leveraging both one-dimensional (1D) and three-dimensional(3D) software tools to accurately analyze the valve’s transient response and operational characteristics. Toachieve optimal valve performance, a multi-objective optimization approach is proposed. This approachemploys a Levy-based Improved Tuna-InspiredWake-Up Optimization Algorithm (L-TIWOA) to refine aBackpropagation (BP) neural network, thereby constructing a highly accurate surrogate model. Compared tothe conventional BP neural network, the improved model demonstrates significantly reduced mean absoluteerror (MAE) and mean squared error (MSE), underscoring its superior predictive capability. The surrogatemodel serves as the objective function within an Improved Multi-Objective Mother Lode OptimizationAlgorithm (IMOMLOA), which is then used to fine-tune the key design parameters of the control valve.Validation through experimental testing reveals that the optimized valve achieves a maximum flow deviationof just 1.11 t/h, corresponding to a control accuracy of 3.7%, at a target flow rate of 30 t/h. Moreover,substantial improvements in dynamic response are observed, confirming the effectiveness of the proposeddesign and optimization strategy.展开更多
This article focuses on the optimization of water supply and drainage systems,involving theories such as hydraulic models of pipeline systems and multi-objective collaborative optimization.It introduces the system dyn...This article focuses on the optimization of water supply and drainage systems,involving theories such as hydraulic models of pipeline systems and multi-objective collaborative optimization.It introduces the system dynamics model of sewage treatment facility expansion.Elaborating on detection technology,construction of an intelligent operation and maintenance system,and factors to be considered for sewage plant expansion,it emphasizes the importance of collaborative development and verifies benefits through the PSR model.展开更多
[Objective] The paper is to construct the logistics tracking management system of tropical agricultural products based on supply chain.[Method] With tropical agricultural products in Hainan as study object,based on lo...[Objective] The paper is to construct the logistics tracking management system of tropical agricultural products based on supply chain.[Method] With tropical agricultural products in Hainan as study object,based on logistics supply chain files and electronic tag coding of agricultural products,cold chain temperature and humidity monitoring,vehicle transportation positioning,data exchange of XML Web services and role-based permission dynamic allocation,the multi-level multi-permission and multi-role logistics tracking management system of tropical agricultural products has been established.[Result] The system constructs information exchange platform for various links of logistics supply chain of tropical agricultural products,which realizes the entire quality monitoring and information tracing of agricultural products,thus enhancing the competitiveness of supply chain in company.[Conclusion] The system has good application and extension prospect.展开更多
As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft ele...As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.展开更多
The redundancy technology for the aircraft multi-channel DC electrical power supply system is studied. In this system, the key loads can obtain power from seven sources. The direct current bus power control unit （DC ...The redundancy technology for the aircraft multi-channel DC electrical power supply system is studied. In this system, the key loads can obtain power from seven sources. The direct current bus power control unit （DC BPCU） is put forward to manage the power supply system automatically. The redundancy innovation is also applied in both hardware and software of DC BPCU. Furthermore, redundancy fault diagnosis is discussed through the existing parts. Experiments and applications show that the proposed aircraft DC power supply system possesses many advantages of high reliability, high automation and so on.展开更多
The universal mathematical model of an engine is established,and an economical zone,in which an engine mainly provides medium output load at medium speed,is presented.Based on the experimental data and the universal m...The universal mathematical model of an engine is established,and an economical zone,in which an engine mainly provides medium output load at medium speed,is presented.Based on the experimental data and the universal model of such an engine above,a mathematical model of a refitted engine is provided.The boundary of the corresponding economical zone is further demarcated,and the optimal operating curve and the operating point of the engine are analyzed.Then,the energy transforming models of the power system are established in the mode of cooling,heating and power（MCHP）,the mode of heating and power（MHP）and the mode of electricity powering（MEP）.The parameter matching of the power system is optimized according to the transmission ratios of the gear box in the power distribution system.The results show that,in the MCHP,the speed transmission ratio of the engine to the gear box（ies）and the speed transmission ratio of the motor to the gear box（ims）are defined as 2.9 and 1,respectively;in the MHP,when the demand load of the power system is less than the low critical load of the economical zone,the speed transmission ratio of the motor to the engine（ime）is equal to 1,and when the demand load of the power system exceeds the low critical load of the economical zone,ime equals 0.85;in the MEP,the optimal value of ims is defined as 2.5.展开更多
Based on the system of electric power supply for flexible manufacturing systems (FMS), a study has been carried out on the intelligent safety examination, monitoring and maintenance of its running environment. On the ...Based on the system of electric power supply for flexible manufacturing systems (FMS), a study has been carried out on the intelligent safety examination, monitoring and maintenance of its running environment. On the basis of the specific feature of the power supply network of an FMS, real time monitoring system of the power supply network and the fault diagnostic expert system for the power equipment have been designed. This system can diagnose not only definite fault phenomena, but also fuzzy, uncertain fault phenomena as well. Fault diagnostic knowledge base for the power equipment has been founded hierarchy architecture model and the method of fault tree analysis. Feasibility of this system has been proved by computer simulation.展开更多
To study the draft sensation distribution of an air jet supply system in a large space building in summer,experiments are conducted in a large laboratory.The temperature,velocity and draft sensation distributions at a...To study the draft sensation distribution of an air jet supply system in a large space building in summer,experiments are conducted in a large laboratory.The temperature,velocity and draft sensation distributions at a nozzle height of 4 m in the occupied zone are obtained.Then,the numerical simulation under the test condition is carried out by the computational fluid dynamics（CFD）method.The calculation results of the indoor vertical temperature and the draft sensation distribution are validated by the test data.Simulations with different nozzle heights are conducted.The satisfactory air supply condition is determined by analyzing the draft sensations and the temperatures in the occupied zone under three conditions.The simulation results show that the optimal draft sensation distribution and the uniform temperature and velocity fields can be obtained at a nozzle height of 5 m.展开更多
文摘In current China, the main problem existing in the rural public goods supplying system is the unbalanced condition of public goods supply, and the chief reason for which is unitary system of supply main body. Thus the leading countermeasure for comer of public goods supply is to reform the present unitary rural public goods supplying system, to strengthen functional transfer of rural grass-roots directive organization, to adopt diversified mode and provide public goods on the base of overall planning of urban and rural areas and to implement unitary and diversified supplying strategy. In this way, supplying efficiency of the rural public goods will be improved.
基金National Key Research and Development Program of China under Grant No.2023YFC3805201Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant Nos.2024B29 and 2024B25。
文摘Following a magnitude M 7.9 earthquake that struck near Mandalay,Myanmar in March 2025,this study investigates the seismic damage inflicted upon the city’s municipal water supply system.The analysis focuses on the failure characteristics of water facilities and pipelines,examines cross-system cascading effects,and proposes corresponding recovery strategies.The main findings are as follows:(1)The damage to water plant facilities,concentrated in ancillary structures and connections due to insufficient seismic measures,demonstrated significant intensity-dependence.Increased seismic intensity not only aggravated structural damage but also compromised core treatment processes,leading to deteriorated water quality.(2)Within the same seismic intensity zone,high-density polyethylene(HDPE)pipes exhibited a significantly lower damage occurrence rate than ductile iron(DI)pipes,highlighting the material’s substantial influence on seismic performance.Moreover,a strong positive correlation was observed between the overall pipeline network damage and the seismic intensity.The average damage rate in IntensityⅨzones was 6.84 times that of IntensityⅧzones.(3)A cascading failure,initiated by a power outage,led to water supply disruption,loss of emergency response capability,and elevated secondary risks.This strongly coupled cross-system effect resulted in significant spatiotemporal propagation of disaster impacts.(4)The post-earthquake recovery adopted a phased strategy that prioritized critical facilities.Actions involved rapidly restoring the core supply zone with temporary points,reinstating the water plant’s power supply,and deploying targeted technologies for efficient pipeline repair.The outcomes of this study are expected to provide critical support and a valuable reference for developing earthquake-resilient urban water supply systems.
基金supported by the National Natural Science Foundation of China(42471336,52379021 and 42201278)the Hebei Province Backbone Talent Program,China(Returnee Platform for Overseas Study)(A20240028)+2 种基金the Hebei Province Statistical Science Research Project,China(2024HZ04)the Hebei Province Graduate Education and Teaching Reform Research Project,China(YJG2024046)the Innovation Ability Training Program for Postgraduate Students of Hebei Provincial Department of Education,China(CXZZSS2025048)。
文摘A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.
基金supported by the National Natural Science Foundation of China(Grant No.51806234)。
文摘The liquid nitrogen(LN2)supplying system,one of the four key systems of the cryogenic wind tunnel(CWT),is an essential guarantee for the precise control,fast and safe regulation of the wind tunnel’s total temperature.Firstly,the technical schemes,advantages and disadvantages of different LN2 supplying systems are discussed and analyzed based on the operation conditions and test requirements of different CWTs.Then,together with the development of the pilot cryogenic transonic wind tunnel(PCTW),the key technologies of the system,including the supplying mode,rapid and accurate regulation of injection pressure,development of large scale cryogenic centrifugal pump,and matching technology between pumps and pipe network,have been summarized and the solutions to the existing issues are given.Finally,a supplying process suitable for large-scale CWT is proposed,which has the ability of independent commissioning,rapid regulation,accurate control of injection pressure and transient response to the wind tunnel’s wide range of working conditions.The breakthrough in LN2 supplying system enables China to construct a CWT for the future competitive high Reynolds number aircraft.
文摘Transgression networks in metropolitan centers need to supply a large quantity of power in a reliable manner to vital loads that are located within. A transmission network supplying such an important area must have a high standard of reliability. Therefore, those transmission systems require a special form of redundancy in order to prevent sustained outages after severe contingencies such as multiple faults. This paper outlines different forms of redundancy, and the fundamental options for designing a metropolitan network based on different forms of redundancy are illustrated. Relative merits and drawbacks of network designs based on each form of redundancy are also shown.
文摘Background: The availability of essential medicines and medical supplies is crucial for effectively delivering healthcare services. In Zambia, the Logistics Management Information System (LMIS) is a key tool for managing the supply chain of these commodities. This study aimed to evaluate the effectiveness of LMIS in ensuring the availability of essential medicines and medical supplies in public hospitals in the Copperbelt Province of Zambia. Materials and Methods: From February to April 2022, a cross-sectional study was conducted in 12 public hospitals across the Copperbelt Province. Data were collected using structured questionnaires, checklists, and stock control cards. The study assessed LMIS availability, training, and knowledge among pharmacy personnel, as well as data accuracy, product availability, and order fill rates. Descriptive statistics were used to analyse the data. Results: All surveyed hospitals had LMIS implemented and were using eLMIS as the primary LMIS. Only 47% and 48% of pharmacy personnel received training in eLMIS and Essential Medicines Logistics Improvement Program (EMLIP), respectively. Most personnel demonstrated good knowledge of LMIS, with 77.7% able to log in to eLMIS Facility Edition, 76.6% able to locate stock control cards in the system, and 78.7% able to perform transactions. However, data accuracy from physical and electronic records varied from 0% to 60%, and product availability ranged from 50% to 80%. Order fill rates from Zambia Medicines and Medical Supplies Agency (ZAMMSA) were consistently below 30%. Discrepancies were observed between physical stock counts and eLMIS records. Conclusion: This study found that most hospitals in the Copperbelt Province of Zambia have implemented LMIS use. While LMIS implementation is high in the Copperbelt Province of Zambia, challenges such as low training levels, data inaccuracies, low product availability, and order fill rates persist. Addressing these issues requires a comprehensive approach, including capacity building, data quality improvement, supply chain coordination, and investment in infrastructure and human resources. Strengthening LMIS effectiveness is crucial for improving healthcare delivery and patient outcomes in Zambia.
文摘For any country,the availability of electricity is crucial to the development of the national economy and society.As a result,decision-makers and policy-makers can improve the sustainability and security of the energy supply by implementing a variety of actions by using the evaluation of these factors as an early warning system.This research aims to provide a multi-criterion decision-making(MCDM)method for assessing the sustainability and security of the electrical supply.The weights of criteria,which indicate their relative relevance in the assessment of the sustainability and security of the energy supply,the MCDM method allow users to express their opinions.To overcome the impact of uncertainty and vagueness of expert opinion,we explore the notion of picture fuzzy theory,which is a more efficient and dominant mathematical model.Recently,the theory of Aczel-Alsina operations has attained a lot of attraction and has an extensive capability to acquire smooth approximated results during the aggregation process.However,Choquet integral operators are more flexible and are used to express correlation among different attributes.This article diagnoses an innovative theory of picture fuzzy set to derive robust mathematical methodologies of picture fuzzy Choquet Integral Aczel-Alsina aggregation operators.To prove the intensity and validity of invented approaches,some dominant properties and special cases are also discussed.An intelligent decision algorithm for the MCDM problem is designed to resolve complicated real-life applications under multiple conflicting criteria.Additionally,we discussed a numerical example to investigate a suitable electric transformer under consideration of different beneficial key criteria.A comparative study is established to capture the superiority and effectiveness of pioneered mathematical approaches with existing methodologies.
文摘Rice straw,a by-product of rice cultivation,is commonly disposed of through open-field burning,which contributes to air pollution and environmental degradation.This study aims to identify the key factors influencing farmers’decisions on rice straw management and to develop policy recommendations that encourage the sustainable utilization of rice straw within the supply chain.A mixed-methods approach was adopted,combining qualitative interviews with nine key informants and a quantitative survey of 585 rice farmers across Thailand.Multinomial Logit Regression(MLR)was employed to analyze farmers’preferences among four management options:burning,composting,animal feeding,and selling.The results reveal that membership in farmer groups,ownership of livestock,access to baling machinery,knowledge,and skills related to straw utilization,ease of field access,availability of storage facilities,engagement in integrated farming,and year-round access to baling services significantly increased the likelihood of choosing sustainable alternatives over the burning straw.These findings underscore the importance of both capacity-building and infrastructure in enabling sustainable practices.Based on these insights,the study proposes a multi-level policy framework to enhance the value creation of rice straw.National policies should focus on expanding access to machinery and supporting innovation,while local governments should facilitate farmer training and improve straw logistics.Strengthening farmer organizations and market connections is also crucial for scaling adoption.Overall,structural integration and stakeholder coordination are key to reducing straw burning and promoting sustainable resource use in rice-producing regions.
基金Trafikföorvaltningen Region Stockholm and Trafikverket for funding and supporting this study.
文摘Purpose–Adding an appropriate pre-sag to the geometry of simple catenary systems for electric railways can improve their performance in dynamic interaction with the pantographs of trains operating under them.The value of pre-sag can be obtained by empirical approximation or computationally expensive optimisation.This study aims to define a simple but accurate method to determine a suitable pre-sag without dynamic simulations and to find its limitations.Design/methodology/approach–A quasi-static method to determine the ideal value of pre-sag is described based on elasticity variations.It considers variations of the static contact force.The limits of this method are investigated by comparing it to a parametric dynamic simulation study.In the dynamic simulation,an optimal level of pre-sag is identified for each contact force level.The influence of the speed in the dynamic simulation results is expressed in two parameters:the quasi-static influence in the mean contact force and the dynamic influence in the ratio between the vehicle speed and the wave propagation speed in the contact wire.Findings–The comparison between the suggested method and the dynamic simulations shows a high consistency up to a speed limit of around 40%of the wave propagation speed.The best agreement with the dynamic results is achieved by calculating the optimal pre-sag based on the absolute elasticity variation.Practical implications–The simplified approach for determining the pre-sag is valid for low-speed applications,such as suburban railway lines.For these cases,a highly suitable geometry can be obtained with the suggested method,meaning a significantly reduced computational effort.As a case study for this work,the results are applied to a Swedish suburban rail line upgrade case.Originality/value–The static uplift force is added as a varied parameter in dynamic simulations.The shift in system behaviour from low to high dynamics is described,and how the benefits from pre-sag are visible and then disappear.The limit value of the low-dynamics regime is identified to be 40%.
基金supported by Sichuan Science and Technology Program(2024YFHZ0161).
文摘Traditional supply chain finance has problems in four aspects:business flow,logistics,capital flow,and information flow.Blockchain technologies such as smart contracts and consensus mechanisms can help break through the above problems.They can improve the implementation effect of supply chain finance,and reduce risks.Based on blockchain technology,this paper constructs a multi-dimensional dynamic supply chain financial risk control system.The system includes multi-dimensional dynamic supply chain financial risk control technology,a credit evaluation system,and a capital monitoring and early warning system.By constructing a multi-dimensional dynamic supply chain financial risk control system,effective risk complete monitoring and penetrating supervision can be achieved.At the same time,this paper introduces technologies such as machine learning and deep learning to build an effective risk control system,which is of great significance for reducing supply chain financial risks.
基金supported by the National Natural Science Foundation of China(No.52107125)Applied Basic Research Project of Sichuan Province(No.2022NSFSC0250)Chengdu Guojia Electrical Engineering Co.,Ltd.(No.KYL202312-0043).
文摘Critical for metering and protection in electric railway traction power supply systems(TPSSs),the measurement performance of voltage transformers(VTs)must be timely and reliably monitored.This paper outlines a three-step,RMS data only method for evaluating VTs in TPSSs.First,a kernel principal component analysis approach is used to diagnose the VT exhibiting significant measurement deviations over time,mitigating the influence of stochastic fluctuations in traction loads.Second,a back propagation neural network is employed to continuously estimate the measurement deviations of the targeted VT.Third,a trend analysis method is developed to assess the evolution of the measurement performance of VTs.Case studies conducted on field data from an operational TPSS demonstrate the effectiveness of the proposed method in detecting VTs with measurement deviations exceeding 1%relative to their original accuracy levels.Additionally,the method accurately tracks deviation trends,enabling the identification of potential early-stage faults in VTs and helping prevent significant economic losses in TPSS operations.
基金National Natural Science Foundation of China,No.42201269,No.42401316Natural Science Foundation of Jiangsu Province,No.BK20241666+3 种基金Humanity and Social Science Youth Foundation of Ministry of Education of China,No.22YJC630087Social Science Foundation of Jiangsu Province,No.24EYB004Open Fund of Key Laboratory of Coastal Zone Exploitation and Protection,Ministry of Natural Resources,No.2023CZEPK07Fundamental Research Funds for the Central Universities,No.2024QN11056。
文摘Existing studies have mostly focused on sustainable intensification(SI)in agricultural systems,while neglecting the integrated analysis of SI for the land space utilization system(LSUS).This has resulted in a lack of systematic solutions in balancing sustainable resource utilization and environmental protection.This study reviewed SI's conceptual framework and evaluation,identified the gaps,and proposed an analytical framework of SI with clear logic and modeling processes for LSUS.Key findings include:(1)Resource competition and ecosystem pressures have highlighted the need to extend traditional agriculture-focused SI to LSUS and establish a clear quantitative evaluation framework for SI;(2)SI for LSUS refers to a system state in which a specific sub-system produces its dominant functions with resource savings,reduced environmental impact,efficient function output,and stable/enhanced function provision,while sub-systems evolve in a coordinated and orderly manner;(3)The assessment framework of SI for LSUS clarifies modeling processes,suggested indicators,methods and scale hierarchy system to help policymakers identify SI priorities across scales,informing strategies to balance agricultural,socioeconomic,and ecosystem goals.This study overcomes the limitations of traditional SI,providing crucial insights for tracking SI performance and identifying barriers in LSUS to enlighten the sustainable land use and management practices.
基金Gansu Provincial Department of Education(Industrial Support Plan Project:202CYZC-048).
文摘Hydraulic control valves, positioned at the terminus of pipe networks, are critical for regulatingflow and pressure, thereby ensuring the operational safety and efficiency of pipeline systems. However,conventional valve designs often struggle to maintain effective regulation across a wide range of systempressures. To address this limitation, this study introduces a novel Pilot hydraulic valves specificallyengineered for enhanced dynamic performance and precise regulation under variable pressure conditions.Building upon prior experimental findings, the proposed design integrates a high-fidelity simulationframework and a surrogate model-based optimization strategy. The study begins by formulating acomprehensive mathematical model of the pipeline system using electro-hydraulic simulation techniques,capturing the dynamic behavior of both the pilot valve and the broader urban water distribution network. Acoupled simulation platform is then developed, leveraging both one-dimensional (1D) and three-dimensional(3D) software tools to accurately analyze the valve’s transient response and operational characteristics. Toachieve optimal valve performance, a multi-objective optimization approach is proposed. This approachemploys a Levy-based Improved Tuna-InspiredWake-Up Optimization Algorithm (L-TIWOA) to refine aBackpropagation (BP) neural network, thereby constructing a highly accurate surrogate model. Compared tothe conventional BP neural network, the improved model demonstrates significantly reduced mean absoluteerror (MAE) and mean squared error (MSE), underscoring its superior predictive capability. The surrogatemodel serves as the objective function within an Improved Multi-Objective Mother Lode OptimizationAlgorithm (IMOMLOA), which is then used to fine-tune the key design parameters of the control valve.Validation through experimental testing reveals that the optimized valve achieves a maximum flow deviationof just 1.11 t/h, corresponding to a control accuracy of 3.7%, at a target flow rate of 30 t/h. Moreover,substantial improvements in dynamic response are observed, confirming the effectiveness of the proposeddesign and optimization strategy.
文摘This article focuses on the optimization of water supply and drainage systems,involving theories such as hydraulic models of pipeline systems and multi-objective collaborative optimization.It introduces the system dynamics model of sewage treatment facility expansion.Elaborating on detection technology,construction of an intelligent operation and maintenance system,and factors to be considered for sewage plant expansion,it emphasizes the importance of collaborative development and verifies benefits through the PSR model.
文摘[Objective] The paper is to construct the logistics tracking management system of tropical agricultural products based on supply chain.[Method] With tropical agricultural products in Hainan as study object,based on logistics supply chain files and electronic tag coding of agricultural products,cold chain temperature and humidity monitoring,vehicle transportation positioning,data exchange of XML Web services and role-based permission dynamic allocation,the multi-level multi-permission and multi-role logistics tracking management system of tropical agricultural products has been established.[Result] The system constructs information exchange platform for various links of logistics supply chain of tropical agricultural products,which realizes the entire quality monitoring and information tracing of agricultural products,thus enhancing the competitiveness of supply chain in company.[Conclusion] The system has good application and extension prospect.
文摘As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.
文摘The redundancy technology for the aircraft multi-channel DC electrical power supply system is studied. In this system, the key loads can obtain power from seven sources. The direct current bus power control unit （DC BPCU） is put forward to manage the power supply system automatically. The redundancy innovation is also applied in both hardware and software of DC BPCU. Furthermore, redundancy fault diagnosis is discussed through the existing parts. Experiments and applications show that the proposed aircraft DC power supply system possesses many advantages of high reliability, high automation and so on.
基金The Natural Science Foundation of Jiangsu Higher Education Institutions of China(No.2009112TSJ0124)
文摘The universal mathematical model of an engine is established,and an economical zone,in which an engine mainly provides medium output load at medium speed,is presented.Based on the experimental data and the universal model of such an engine above,a mathematical model of a refitted engine is provided.The boundary of the corresponding economical zone is further demarcated,and the optimal operating curve and the operating point of the engine are analyzed.Then,the energy transforming models of the power system are established in the mode of cooling,heating and power（MCHP）,the mode of heating and power（MHP）and the mode of electricity powering（MEP）.The parameter matching of the power system is optimized according to the transmission ratios of the gear box in the power distribution system.The results show that,in the MCHP,the speed transmission ratio of the engine to the gear box（ies）and the speed transmission ratio of the motor to the gear box（ims）are defined as 2.9 and 1,respectively;in the MHP,when the demand load of the power system is less than the low critical load of the economical zone,the speed transmission ratio of the motor to the engine（ime）is equal to 1,and when the demand load of the power system exceeds the low critical load of the economical zone,ime equals 0.85;in the MEP,the optimal value of ims is defined as 2.5.
文摘Based on the system of electric power supply for flexible manufacturing systems (FMS), a study has been carried out on the intelligent safety examination, monitoring and maintenance of its running environment. On the basis of the specific feature of the power supply network of an FMS, real time monitoring system of the power supply network and the fault diagnostic expert system for the power equipment have been designed. This system can diagnose not only definite fault phenomena, but also fuzzy, uncertain fault phenomena as well. Fault diagnostic knowledge base for the power equipment has been founded hierarchy architecture model and the method of fault tree analysis. Feasibility of this system has been proved by computer simulation.
基金The National Natural Science Foundation of China(No.50478113)the Leading Academic Discipline Project of Shanghai Municipal Education Commission(No.J50502)
文摘To study the draft sensation distribution of an air jet supply system in a large space building in summer,experiments are conducted in a large laboratory.The temperature,velocity and draft sensation distributions at a nozzle height of 4 m in the occupied zone are obtained.Then,the numerical simulation under the test condition is carried out by the computational fluid dynamics（CFD）method.The calculation results of the indoor vertical temperature and the draft sensation distribution are validated by the test data.Simulations with different nozzle heights are conducted.The satisfactory air supply condition is determined by analyzing the draft sensations and the temperatures in the occupied zone under three conditions.The simulation results show that the optimal draft sensation distribution and the uniform temperature and velocity fields can be obtained at a nozzle height of 5 m.
