Due to the gradually prominent impact of fracture characteristics and serrated yielding in the application of nickel-based superalloys,the hot tensile properties of Inconel 718 superalloy were studied,including fractu...Due to the gradually prominent impact of fracture characteristics and serrated yielding in the application of nickel-based superalloys,the hot tensile properties of Inconel 718 superalloy were studied,including fracture behavior,mechanical properties,and plastic behavior.The experiments adopted three heat treatment regimes and two tensile directions.Results show that various heat treatments make grain sizes different.The larger-sized grains make the vertical surface uneven,which also decrease the number of grain boundaries and carbides,restricting the occurrence of dimples and ultimately reducing the material plasticity.The reduced grain boundaries can decrease dislocations,increase the demand for thermal activation energy,and transform the serration mode of serrated yielding.In addition,various heat treatments also make precipitates different.Carbides can promote the formation of dimples.The needle-shaped δ phase precipitates at grain boundaries and twin boundaries,and slightly inclines towards the rolling direction.Therefore,its pinning effect is outstanding along the transverse direction,which can affect the dimple aggregation and the dislocation movement,ultimately exhibiting anisotropy in fracture characteristics,mechanical properties,and serrated yielding.展开更多
To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The ...To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.展开更多
The inelastic behavior of thermoplastic polymers may involve shearing and crazing,and both depend on temperature and strain rate.Traditional constitutive models account for temperature and strain rate through phenomen...The inelastic behavior of thermoplastic polymers may involve shearing and crazing,and both depend on temperature and strain rate.Traditional constitutive models account for temperature and strain rate through phenomenological or empirical formulas.In this study,we present a physics-guided machine learning(ML)framework to model shear and craze in polymeric materials.The effects of all three principal stresses for the craze initiation are considered other than the maximum tensile principal stress solely in previous works.We implemented a finite element framework through a user-defined material subroutine and applied the constitutive model to the deformation in three polymers(PLA 4060D,PLA 3051D,and HIPS).The result shows that our ML-based model can predict the stress-strain and volume-strain responses at different strain rates with high accuracy.Notably,the ML-based approach needs no assumptions about yield criteria or hardening laws.This work highlights the potential of hybrid physics-ML paradigms to overcome the trade-offs between model complexity and accuracy in polymer mechanics,paving the way for computationally efficient and generalizable constitutive models for thermoplastic materials.展开更多
[Objective] The aim was to study on effects of N fertilizer on yield, N absorption and utilization of different cultivars of super high-yielding summer maize, in order to provide reference for reasonable N fertilizati...[Objective] The aim was to study on effects of N fertilizer on yield, N absorption and utilization of different cultivars of super high-yielding summer maize, in order to provide reference for reasonable N fertilization in accordance with different cultivars. [Method] Field experiment was conducted to study on effects of different N fertilizers on yield, N absorption and use efficiency of Zhengdan 958 and Xundan 20, in order to learn the effect differences at different N fertilizer levels. [Result] After N was applied, yields of the two summer maize increased significantly. Zhengdan 958 achieved the highest in yield and proceeds at 12 051.18 kg/hm2 and 1 722.40 yuan/hm2, respectively in low N level. In contrast, Xundan 20 achieved the highest at 13 166.00 kg/hm2 and 1 343.92 yuan/hm2 in the above two aspects in high N level. Compared with Zhengdan 958, Xundan 20 increased by 9.90%, 5.20% and 12.00% in N levels of 0, 240, and 450 kg/hm2, respectively. When N fertilizers were applied, protein yield of Xundan 20 was significantly higher than that of Zhengdan 958, so that higher N fertilizers contributed higher protein yield for Xundan 20. In high N level, N efficiency, N-fertilizer utilization and partial productivity of Xundan 20 were significantly higher than that of Zhengdan 958. [Conclusion] Lower N-fertilizer was suitable for Zhengdan 958 and Xundan 20 would get a good harvest if more N-fertilizers were applied. The results provided references for reasonable N fertilization.展开更多
As a new attempt, local canning compression was applied in order to implement large plastic deformation of nickel-titanium shape memory alloy （NiTi SMA） at room temperature. The plastic mechanics of local canning co...As a new attempt, local canning compression was applied in order to implement large plastic deformation of nickel-titanium shape memory alloy （NiTi SMA） at room temperature. The plastic mechanics of local canning compression of NiTi SMA was analyzed according to the slab method as the well as plastic yield criterion. Transmission electron microscopy （TEM）, high resolution transmission electron microscopy （HRTEM） and scanning electron microscopy （SEM） were used to study the microstructural evolution as well as deformation behavior of NiTi samples under local canning compression. Increasing the hydrostatic pressure with the increase in the outer diameters of the steel cans is responsible for suppressing the initiation and growth of the micro-cracks, which contributes to enhancing the plasticity ofNiTi SMA and avoiding the occurrence of brittle fracture. Plastic deformation of NiTi SMA under a three-dimensional compressive stress state meets von-Mises yield criterion at the true strains ranging from about 0.15 to 0.50, while in the case of larger plastic strain, von-Mises yield criterion is unable to be met since the amorphous phase arises in the deformed NiTi sample.展开更多
In order to define the relationship between yield and important agronomic traits of two lines hybrid Uangyou 2111, the principal component analysis method was used to analyze the expadmental data of six test points in...In order to define the relationship between yield and important agronomic traits of two lines hybrid Uangyou 2111, the principal component analysis method was used to analyze the expadmental data of six test points in Yunnan Province. The results showed that the main factors influencing the production of Liangyou 2111 were grain number, grains seed number, panicle length, growth padod and panicle rate; then were 1 O00-grain weight, seed setting rate, effective panicle and highest stem tillers number; again was plant height. Therefore, when hybrid rice of Uangyou 2111 will be planted widely in yunnan province, we should focus on en- sudng the panicle traits, especially increase grain number and grain seed number, and coordinately develop other traits to achieve high yield.展开更多
The discontinuous yielding phenomenon （DYP） during high temperature deformation was investigated based on the isothermal compression of TC8 titanium alloy. The DYP of TC8 titanium alloy was characterized by quan...The discontinuous yielding phenomenon （DYP） during high temperature deformation was investigated based on the isothermal compression of TC8 titanium alloy. The DYP of TC8 titanium alloy was characterized by quantifying the yield drop of the DYP （△σUL） and ending strain of flow oscillation （εOSC） based on the flow stress？strain curves, and then the effect of deformation parameters on the △σUL and εOSC values was analyzed. The results show that the △σUL and εOSC values increase with the increase of strain rate. The effect of deformation temperature on the ？σUL value depends on the strain rate. Finally, the transmission electron microscope （TEM） observation shows the evidence for the dynamic theory, which ascribes the DYP to the generation of mobile dislocation at the grain boundary. Meanwhile, the optical microscope （OM） observation shows that both the primary α grain and β grain become smaller with the increase of strain, which well interprets the effect of deformation parameters on the △σUL and εOSC values.展开更多
In order to construct a good population structure, improve the light energy utilization ratio, and give a full play to the high-yielding potential of spring maize, the effects of maize variety, planting density and fe...In order to construct a good population structure, improve the light energy utilization ratio, and give a full play to the high-yielding potential of spring maize, the effects of maize variety, planting density and fertilizer management on matter production and population photosynthetic physiological indices of spring maize were investigated under three different modes （traditional mode, optimized mode and high- yielding mode）. The results showed that compared with those under the traditional mode, the yield of spring maize under the optimized mode and high-yielding mode was increased by 10.79% and 27.62%, respectively, and the barren tip length was reduced significantly. Among the three modes, the leaf area index （LA/）, leaf area duration （LAD）, dry matter accumulation （DMA） and crop growth rate （CGR） all ranked as high-yielding rnode＇s〉optimized mode＇s〉traditional mode＇s. In conclusion, optimized variety, appropriately increased planting density and strengthened fertilizer management are the key measures to obtain high yield of spring maize.展开更多
[Objective] In order to explore the yield potential of cassava, the responses of new cassava varieties to fertilizer quantity was investigated. [Method] A comparative experiment was carried out on 5 new fertilizer-tol...[Objective] In order to explore the yield potential of cassava, the responses of new cassava varieties to fertilizer quantity was investigated. [Method] A comparative experiment was carried out on 5 new fertilizer-tolerant high-yield cassava varieties（Guire 8, Guire 9, Guire 10, Xinxuan 048 and Guiken 09-26） with the normal-level fertilization groups of these varieties as controls. [Result] The results showed that：（1） increasing fertilizers could significantly improve the stem and leaf yield of cassava;（2） increasing fertilizers could reduce the dry matter content of cassava; and（3） different varieties differed in fertilizer tolerance, and the fertilizing amount should be determined according to specific varieties. [Conclusion] Guire 10 and Xinxuan 048 are suitable for being cultivated at a high fertilizer level, and the remaining three varieties（Guiken 09-26, Guire 8 and Guire 9） are suitable for being cultivated at a normal fertilizer level.展开更多
[Objective] The aim was to research the appropriate seeding quantities of double-season machine-transplanted rice in middle and low-yielding district of southern Jiangxi Province. [Method] The research set five differ...[Objective] The aim was to research the appropriate seeding quantities of double-season machine-transplanted rice in middle and low-yielding district of southern Jiangxi Province. [Method] The research set five different seeding quantities treatments, and compared with conventional seedling treatment, and the appropriate seeding quantities of double season machine-transplanted rice in middle and lowyielding district of southern Jiangxi Province was discussed. [Result] The yields were highest when the seeding quantity was 70 g per tray of early rice by mechanical transplanting and 60 g per tray of late rice. The yield of early rice by mechanical transplanting showed significantly positive correlation with the number of productive ear and the number of seed per ear, and late rice yield showed significant correlation with the number of productive ear by mechanical transplanting. It is key for improving high yields by guaranteeing the number of productive ear. [Conclusion] The issue of proper sowing quantity should be taken into consideration for double-cropping rice in the region, which is crucial for high yields.展开更多
The growth period, population tiller dynamics, plant characters, paniclegrain structure, yielding ability and stress resistance of a wheat variety Heibaoshi 1 were studied using a two-factor split plot design to inves...The growth period, population tiller dynamics, plant characters, paniclegrain structure, yielding ability and stress resistance of a wheat variety Heibaoshi 1 were studied using a two-factor split plot design to investigate the effects of different density and fertilizer levels on individual development and yield of Heibaoshi 1 in riparian region of Jiangsu Province. In addition, high-yielding agronomic measures were explored through multiple non-linear regression analysis. The results showed that low density was not conducive to the formation of panicles, while high density affected grain number per panicle; low fertilizer level restricted individual development, while high fertilizer level affected grain number per panicle and grain weight and was prone to leading to lodging. Reasonable combination of density and fertilizer could coordinate individual development and balance panicle, grain and weight, thus achieving a high yield. The yield potential was highest （7 384.3 kg/hm2） under density of 239.6×104 basic seedlings/hm2 and N level of 237.7 kg/hm2. When the planting density ranged from 200×104 to 270×104 basic seedlings/hm2 and the N level ranged from 220 to 260 kg/hm2 or the density basic seedling number ranged from 210×104/hm2 to 260×104/hm2 and the N level ranged from 210 to 270 kg/hm2, the yield could exceed 7 200 kg/hm2.展开更多
Samples of AZ80 alloy were hot extruded at 380 ℃ and aged at temperatures of 170 ℃ and 310 ℃ respectively for different periods to compare the effect of precipitate structures on the tensile-compressive yielding as...Samples of AZ80 alloy were hot extruded at 380 ℃ and aged at temperatures of 170 ℃ and 310 ℃ respectively for different periods to compare the effect of precipitate structures on the tensile-compressive yielding asymmetry in magnesium alloy. Uniaxial tension and compression along the extruded direction were carried out at room temperature. It was found that the yielding asymmetry in the aged samples was not as significant as that in the as-extruded samples. This was because twinning occurred less readily in the aged samples. And it was also confirmed by the fact that the increment of the critical resolved shear stress （CRSS） for twinning was higher and the Schmid factor was lower in the aged samples in the presence of precipitate. Thus, it was concluded that the yielding asymmetry could be reduced and even eliminated by increasing the area fraction of the precipitate phase.展开更多
Cotton yield per unit ground area has stagnated for a dozen years in Hubei Province, China, although a series of new high- yielding varieties have been commercialized. A multi-location investigation was carried out in...Cotton yield per unit ground area has stagnated for a dozen years in Hubei Province, China, although a series of new high- yielding varieties have been commercialized. A multi-location investigation was carried out in 2008 and 2009 in 13 counties to determine if increased planting population density （PPD） would break the stagnant yield. The results showed that significant differences among the fields existed in theoretical yield, PPD, and bolls per square meter （BPM）. The lowest yield of 1 641.1 kg ha-I was resulted from the lowest PPD of 1.7 plants m-2 and the lowest BPM of 71.8 bolls m-2, while the highest yield of 2 779.7 kg ha-~ was resulted from the highest PPD of 2.5 plants m-2, and the highest BPM of 129.4 bolls m-z. Plant mapping revealed that boll retention rate （BRR） was maintained over 30 or 40% for the first 17-18 fruiting branches （FBs） and decreased dramatically thereafter, rotten boll rate （RBR） decreased, but open boll rate （OBR） rose first and dropped later with rising FB from the bottom to the top. But BRR, RBR, and OBR were all dropped with the fruiting positions （FPs） extending outwards. The optimum range of plant density would be 2-3 plants m-2 and the proper individual plant structure would be 16-19 FBs with 5-7 FPs for cotton production in Hubei Province.展开更多
Abstract There are many soft-rock roadway coal mines in China. The surrounding rocks of the high-stress soft-rock roadways in deep mine are especially difficult to be supported using the traditional supporting way. In...Abstract There are many soft-rock roadway coal mines in China. The surrounding rocks of the high-stress soft-rock roadways in deep mine are especially difficult to be supported using the traditional supporting way. In this study, the south wing rail roadway on the second level of Yunjialing coal mine in China was used as an example to analyze the deformation and failure characteristics and influencing factors of roadway. On this basis, this study proposed the equalized yielding support idea which employs the yielding rings to realize the pressure equalization on the bolts and cables in the section. To achieve this purpose, the first bolt-mesh-cable equalizing pressure yielding support was integrated with the second grouting reinforcement. The results proved that the yield rings of the bolts and cables on the spandrel of the arched roadway firstly developed yielding deformation; then the deformation extended to the vault of the roadway; the bolts and cables achieved a yielding extreme value of 15 and 18 tonnes, respectively. The roadway surrounding rock tended to be stable at the 26th day after the maintenance. The equalizing pressure yielding supporting technology plays a moderate pressure-releasing and actively controlling role on the surrounding rocks in the soft-rock roadway with large deformation.展开更多
A better understanding of a recently raised argument on whether there occurs a structure change during yielding has been acquired by using molecular simulation. That is, when monitoring the displacements of all atoms ...A better understanding of a recently raised argument on whether there occurs a structure change during yielding has been acquired by using molecular simulation. That is, when monitoring the displacements of all atoms before and after the yield, a structure transition does occur, which is the 'atomic jump' that coordinates the amount of the atoms in the polymer and makes a large step beyond similar to0.05 nm for all those atoms. Results indicate that the complex of polymer chain packing induces the multiple atomic jumps around the yield point. This explains why polymers have a broader yielding peak.展开更多
In 1996,China launched a program to breed super rice or super hybrid rice by combining intersubspecific heterosis with ideal plant types.Today,approximately 80 super rice varieties have been released and some of them ...In 1996,China launched a program to breed super rice or super hybrid rice by combining intersubspecific heterosis with ideal plant types.Today,approximately 80 super rice varieties have been released and some of them show high grain yields of 12-21 t/hm2 in field experiments.The main reasons for the high yields of super rice varieties,compared with those of conventional varieties,can be summarized as follows：more spikelets per panicle and larger sink size （number of spikelets per square meter）;larger leaf area index,longer duration of green leaf,greater photosynthetic rate,higher lodging resistance,greater dry matter accumulation before the heading stage,greater remobilization of pre-stored carbohydrates from stems and leaves to grains during the grain-filling period;and larger root system and greater root activity.However,there are two main problems in super rice production：poor grain-filling of the later-flowering inferior spikelets （in contrast to earlier-flowering superior spikelets）,and low and unstable seed-setting rate.Here,we review recent research advances in the crop physiology of super rice,focusing on biological features,formation of yield components,and population quality.Finally,we suggest further research on crop physiology of super rice.展开更多
Using large strain two dimension axisymmetric elasto plastic finite element method and the modified law of mixture, the effects of thermal residual stresses on the yielding behavior of short fiber reinforced metal mat...Using large strain two dimension axisymmetric elasto plastic finite element method and the modified law of mixture, the effects of thermal residual stresses on the yielding behavior of short fiber reinforced metal matrix composite and their dependencies on the material structure parameters (fiber volume fraction, fiber aspect ratio and fiber end distance) were studied. It is demonstrated that the stress strain partition parameter can be used to describe the stress transfer from the matrix to the fiber. The variation of the second derivation of the stress strain partition parameter can be used to determine the elastic modulus, the proportion limit, the initial and final yield strengths. In the presence of thermal residual stress, these yielding properties are asymmetric and are influenced differently by the material structure parameters under tensile and compressive loadings.展开更多
Foamed concrete as energy absorption material for high geo-stress soft rock tunnels has been proven to be feasible due to its high compressibility and lightweight.However,the lengthy curing and defoaming problems caus...Foamed concrete as energy absorption material for high geo-stress soft rock tunnels has been proven to be feasible due to its high compressibility and lightweight.However,the lengthy curing and defoaming problems caused by the cast-in-place method of large-volume foamed concrete remain unsolved.In this study,we propose a novel energy absorber composed of foamed concrete-filled polyethylene(FC-PE)pipe and analyze its deformation and energy absorption capacity via quasi-static lateral compression experiments.Results show that FC-PE pipes exhibit typical three-stage deformation characteristics,comprising the elastic stage,the plastic plateau,and the densification stage.Furthermore,the plateau stress,energy absorption,and specific energy absorption of the specimens are 0.81–1.91 MPa,164–533 J,and 1.4–3.6 J/g,respectively.As the density of the foamed concrete increases,the plateau stress and energy absorption increase significantly.Conversely,the length of the plastic plateau and energy absorption efficiency decrease.Moreover,based on the vertical slice method,progressive compression of core material,and the 6 plastic hinges deformation mechanism of the pipe wall,a theoretical calculation method for effective energy absorption is established and achieves good agreement with experimental results,which is beneficial to the optimization of the composite structure.展开更多
The yielding ability and stability and adaptability of eight proso millet varieties from Shanxi,Inner Mongolia,Heilongjiang and Hebei were analyzed and evaluated in different ecological regions including Zhangjiakou,H...The yielding ability and stability and adaptability of eight proso millet varieties from Shanxi,Inner Mongolia,Heilongjiang and Hebei were analyzed and evaluated in different ecological regions including Zhangjiakou,Huanghua and Shijiazhuang in 2015. The results showed that Chishu No. 2 and Jishu No. 2 have stronger yielding ability,and their grain yields were 3 144. 42( highest) and 3 133. 15 kg/ha respectively,ranking first and second in the test varieties. In areas with low fertility,especially in saline-alkali areas,they still have potential for high yields,so they are suitable for promotion in large areas in Hebei Province. Neimi No. 8 and Yanshu No. 11 showed special adaptability under different ecological conditions. They require high-fertility soil and can be planted in the spring millet area in north of Hebei.展开更多
The traditional soil-based rice seedling production methods for mechanical transplanting are resource-intensive,time consuming and laborious.The improvement and optimization of nutrient management in soil-less nursery...The traditional soil-based rice seedling production methods for mechanical transplanting are resource-intensive,time consuming and laborious.The improvement and optimization of nutrient management in soil-less nursery raising methods like tandem long-mat seedlings(TLMS)are necessary for the resource-efficient cultivation of rice.In the present study,a controlled-release fertilizer(CRF)-polymer-coated compound fertilizer with 3 months release period(PCCF-3M)was applied as seedling fertilizer(SF),and five different dosages of SF(SF-0,SF-10,SF-20,SF-30,and SF-40)were compared with an organic substrate as the control(CK).Among all SF treatments,the best results were obtained with the application of 20 g/tray of SF(SF-20),as the seedling quality and machine transplanting quality were comparable to those of CK.In contrast,the lower dosages(SF-0 and SF-10)resulted in low nitrogen content and reduced shoot growth,while the higher dosages(SF-30 and SF-40)resulted in toxicity(increased malondialdehyde accumulation)and inhibited the root growth.Similarly,SF-20 increased panicle number(5.6-7.0%)and yield(4.3-5.3%)compared with CK,which might be related to the remaining SF entangled in the roots supporting the tiller growth of rice seedlings in the field.Moreover,SF-20 reduced the seedling block weight(53.1%)and cost of seedling production(23.5%)but increased the gross margin,indicating that it was easy to handle and economical.Taken together,our results indicate that SF-20 is a cost-effective way to promote the growth and transplanting efficiency of rice seedlings.To our knowledge,this study is the first to determine the optimum dosage of CRF for the soil-less production of rice seedlings.展开更多
基金National Natural Science Foundation of China(52175353)Shanxi Province Key Research and Development Program(202102150401002)Shanxi Province Major Science and Technology Special Project(202101110401009)。
文摘Due to the gradually prominent impact of fracture characteristics and serrated yielding in the application of nickel-based superalloys,the hot tensile properties of Inconel 718 superalloy were studied,including fracture behavior,mechanical properties,and plastic behavior.The experiments adopted three heat treatment regimes and two tensile directions.Results show that various heat treatments make grain sizes different.The larger-sized grains make the vertical surface uneven,which also decrease the number of grain boundaries and carbides,restricting the occurrence of dimples and ultimately reducing the material plasticity.The reduced grain boundaries can decrease dislocations,increase the demand for thermal activation energy,and transform the serration mode of serrated yielding.In addition,various heat treatments also make precipitates different.Carbides can promote the formation of dimples.The needle-shaped δ phase precipitates at grain boundaries and twin boundaries,and slightly inclines towards the rolling direction.Therefore,its pinning effect is outstanding along the transverse direction,which can affect the dimple aggregation and the dislocation movement,ultimately exhibiting anisotropy in fracture characteristics,mechanical properties,and serrated yielding.
基金supported by the National Natural Science Foundation of China(Nos.U2468217,U2034205,and 52308391)。
文摘To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.
基金supported by the National Natural Science Foundation of China(NSFC)Excellent Research Group Program for“Multiscale Problems in Nonlinear Mechanics”(Grant No.12588201)。
文摘The inelastic behavior of thermoplastic polymers may involve shearing and crazing,and both depend on temperature and strain rate.Traditional constitutive models account for temperature and strain rate through phenomenological or empirical formulas.In this study,we present a physics-guided machine learning(ML)framework to model shear and craze in polymeric materials.The effects of all three principal stresses for the craze initiation are considered other than the maximum tensile principal stress solely in previous works.We implemented a finite element framework through a user-defined material subroutine and applied the constitutive model to the deformation in three polymers(PLA 4060D,PLA 3051D,and HIPS).The result shows that our ML-based model can predict the stress-strain and volume-strain responses at different strain rates with high accuracy.Notably,the ML-based approach needs no assumptions about yield criteria or hardening laws.This work highlights the potential of hybrid physics-ML paradigms to overcome the trade-offs between model complexity and accuracy in polymer mechanics,paving the way for computationally efficient and generalizable constitutive models for thermoplastic materials.
基金Supported by Cooperation project of International Plant Nutrition Institution(IPNI)(NMBF-HenanAU-2007)Special Fund for Construction of National Modern Maize Industrial Technology System(nycytx-02-17)~~
文摘[Objective] The aim was to study on effects of N fertilizer on yield, N absorption and utilization of different cultivars of super high-yielding summer maize, in order to provide reference for reasonable N fertilization in accordance with different cultivars. [Method] Field experiment was conducted to study on effects of different N fertilizers on yield, N absorption and use efficiency of Zhengdan 958 and Xundan 20, in order to learn the effect differences at different N fertilizer levels. [Result] After N was applied, yields of the two summer maize increased significantly. Zhengdan 958 achieved the highest in yield and proceeds at 12 051.18 kg/hm2 and 1 722.40 yuan/hm2, respectively in low N level. In contrast, Xundan 20 achieved the highest at 13 166.00 kg/hm2 and 1 343.92 yuan/hm2 in the above two aspects in high N level. Compared with Zhengdan 958, Xundan 20 increased by 9.90%, 5.20% and 12.00% in N levels of 0, 240, and 450 kg/hm2, respectively. When N fertilizers were applied, protein yield of Xundan 20 was significantly higher than that of Zhengdan 958, so that higher N fertilizers contributed higher protein yield for Xundan 20. In high N level, N efficiency, N-fertilizer utilization and partial productivity of Xundan 20 were significantly higher than that of Zhengdan 958. [Conclusion] Lower N-fertilizer was suitable for Zhengdan 958 and Xundan 20 would get a good harvest if more N-fertilizers were applied. The results provided references for reasonable N fertilization.
基金Project(51071056)supported by the National Natural Science Foundation of ChinaProjects(HEUCF121712,HEUCF201317002)supported by the Fundamental Research Funds for the Central Universities of China
文摘As a new attempt, local canning compression was applied in order to implement large plastic deformation of nickel-titanium shape memory alloy （NiTi SMA） at room temperature. The plastic mechanics of local canning compression of NiTi SMA was analyzed according to the slab method as the well as plastic yield criterion. Transmission electron microscopy （TEM）, high resolution transmission electron microscopy （HRTEM） and scanning electron microscopy （SEM） were used to study the microstructural evolution as well as deformation behavior of NiTi samples under local canning compression. Increasing the hydrostatic pressure with the increase in the outer diameters of the steel cans is responsible for suppressing the initiation and growth of the micro-cracks, which contributes to enhancing the plasticity ofNiTi SMA and avoiding the occurrence of brittle fracture. Plastic deformation of NiTi SMA under a three-dimensional compressive stress state meets von-Mises yield criterion at the true strains ranging from about 0.15 to 0.50, while in the case of larger plastic strain, von-Mises yield criterion is unable to be met since the amorphous phase arises in the deformed NiTi sample.
基金Supported by Yunnan Agricultural Development BureauYunnan Modern Agricultural Rice Industry Technology System~~
文摘In order to define the relationship between yield and important agronomic traits of two lines hybrid Uangyou 2111, the principal component analysis method was used to analyze the expadmental data of six test points in Yunnan Province. The results showed that the main factors influencing the production of Liangyou 2111 were grain number, grains seed number, panicle length, growth padod and panicle rate; then were 1 O00-grain weight, seed setting rate, effective panicle and highest stem tillers number; again was plant height. Therefore, when hybrid rice of Uangyou 2111 will be planted widely in yunnan province, we should focus on en- sudng the panicle traits, especially increase grain number and grain seed number, and coordinately develop other traits to achieve high yield.
基金Project(51275416)supported by the National Natural Science Foundation of China
文摘The discontinuous yielding phenomenon （DYP） during high temperature deformation was investigated based on the isothermal compression of TC8 titanium alloy. The DYP of TC8 titanium alloy was characterized by quantifying the yield drop of the DYP （△σUL） and ending strain of flow oscillation （εOSC） based on the flow stress？strain curves, and then the effect of deformation parameters on the △σUL and εOSC values was analyzed. The results show that the △σUL and εOSC values increase with the increase of strain rate. The effect of deformation temperature on the ？σUL value depends on the strain rate. Finally, the transmission electron microscope （TEM） observation shows the evidence for the dynamic theory, which ascribes the DYP to the generation of mobile dislocation at the grain boundary. Meanwhile, the optical microscope （OM） observation shows that both the primary α grain and β grain become smaller with the increase of strain, which well interprets the effect of deformation parameters on the △σUL and εOSC values.
基金Supported by China’s International Science and Technology Cooperation Fund(2015DFA90990)Key Science and Technology Program of Shanxi Province,China(20140311002-3)~~
文摘In order to construct a good population structure, improve the light energy utilization ratio, and give a full play to the high-yielding potential of spring maize, the effects of maize variety, planting density and fertilizer management on matter production and population photosynthetic physiological indices of spring maize were investigated under three different modes （traditional mode, optimized mode and high- yielding mode）. The results showed that compared with those under the traditional mode, the yield of spring maize under the optimized mode and high-yielding mode was increased by 10.79% and 27.62%, respectively, and the barren tip length was reduced significantly. Among the three modes, the leaf area index （LA/）, leaf area duration （LAD）, dry matter accumulation （DMA） and crop growth rate （CGR） all ranked as high-yielding rnode＇s〉optimized mode＇s〉traditional mode＇s. In conclusion, optimized variety, appropriately increased planting density and strengthened fertilizer management are the key measures to obtain high yield of spring maize.
基金Supported by the Earmarked Fund for China Agriculture Research System(CARS-12-cssy)~~
文摘[Objective] In order to explore the yield potential of cassava, the responses of new cassava varieties to fertilizer quantity was investigated. [Method] A comparative experiment was carried out on 5 new fertilizer-tolerant high-yield cassava varieties（Guire 8, Guire 9, Guire 10, Xinxuan 048 and Guiken 09-26） with the normal-level fertilization groups of these varieties as controls. [Result] The results showed that：（1） increasing fertilizers could significantly improve the stem and leaf yield of cassava;（2） increasing fertilizers could reduce the dry matter content of cassava; and（3） different varieties differed in fertilizer tolerance, and the fertilizing amount should be determined according to specific varieties. [Conclusion] Guire 10 and Xinxuan 048 are suitable for being cultivated at a high fertilizer level, and the remaining three varieties（Guiken 09-26, Guire 8 and Guire 9） are suitable for being cultivated at a normal fertilizer level.
基金National Key Technology R&D Program of the Ministry of Science and Technology(2011BAD16B04,(2012BAD04B11)~~
文摘[Objective] The aim was to research the appropriate seeding quantities of double-season machine-transplanted rice in middle and low-yielding district of southern Jiangxi Province. [Method] The research set five different seeding quantities treatments, and compared with conventional seedling treatment, and the appropriate seeding quantities of double season machine-transplanted rice in middle and lowyielding district of southern Jiangxi Province was discussed. [Result] The yields were highest when the seeding quantity was 70 g per tray of early rice by mechanical transplanting and 60 g per tray of late rice. The yield of early rice by mechanical transplanting showed significantly positive correlation with the number of productive ear and the number of seed per ear, and late rice yield showed significant correlation with the number of productive ear by mechanical transplanting. It is key for improving high yields by guaranteeing the number of productive ear. [Conclusion] The issue of proper sowing quantity should be taken into consideration for double-cropping rice in the region, which is crucial for high yields.
文摘The growth period, population tiller dynamics, plant characters, paniclegrain structure, yielding ability and stress resistance of a wheat variety Heibaoshi 1 were studied using a two-factor split plot design to investigate the effects of different density and fertilizer levels on individual development and yield of Heibaoshi 1 in riparian region of Jiangsu Province. In addition, high-yielding agronomic measures were explored through multiple non-linear regression analysis. The results showed that low density was not conducive to the formation of panicles, while high density affected grain number per panicle; low fertilizer level restricted individual development, while high fertilizer level affected grain number per panicle and grain weight and was prone to leading to lodging. Reasonable combination of density and fertilizer could coordinate individual development and balance panicle, grain and weight, thus achieving a high yield. The yield potential was highest （7 384.3 kg/hm2） under density of 239.6×104 basic seedlings/hm2 and N level of 237.7 kg/hm2. When the planting density ranged from 200×104 to 270×104 basic seedlings/hm2 and the N level ranged from 220 to 260 kg/hm2 or the density basic seedling number ranged from 210×104/hm2 to 260×104/hm2 and the N level ranged from 210 to 270 kg/hm2, the yield could exceed 7 200 kg/hm2.
基金Project (20110309) supported by the National Natural Science Foundation of China
文摘Samples of AZ80 alloy were hot extruded at 380 ℃ and aged at temperatures of 170 ℃ and 310 ℃ respectively for different periods to compare the effect of precipitate structures on the tensile-compressive yielding asymmetry in magnesium alloy. Uniaxial tension and compression along the extruded direction were carried out at room temperature. It was found that the yielding asymmetry in the aged samples was not as significant as that in the as-extruded samples. This was because twinning occurred less readily in the aged samples. And it was also confirmed by the fact that the increment of the critical resolved shear stress （CRSS） for twinning was higher and the Schmid factor was lower in the aged samples in the presence of precipitate. Thus, it was concluded that the yielding asymmetry could be reduced and even eliminated by increasing the area fraction of the precipitate phase.
基金funded by the Professional (Agriculture) Researching Project for Public Benefit of Ministry of Agriculture,China (3-5)High-Yielding Promotion Project of Ministry of Agriculture,Chinathe National Industrial System Program of Modern Agriculture,China
文摘Cotton yield per unit ground area has stagnated for a dozen years in Hubei Province, China, although a series of new high- yielding varieties have been commercialized. A multi-location investigation was carried out in 2008 and 2009 in 13 counties to determine if increased planting population density （PPD） would break the stagnant yield. The results showed that significant differences among the fields existed in theoretical yield, PPD, and bolls per square meter （BPM）. The lowest yield of 1 641.1 kg ha-I was resulted from the lowest PPD of 1.7 plants m-2 and the lowest BPM of 71.8 bolls m-2, while the highest yield of 2 779.7 kg ha-~ was resulted from the highest PPD of 2.5 plants m-2, and the highest BPM of 129.4 bolls m-z. Plant mapping revealed that boll retention rate （BRR） was maintained over 30 or 40% for the first 17-18 fruiting branches （FBs） and decreased dramatically thereafter, rotten boll rate （RBR） decreased, but open boll rate （OBR） rose first and dropped later with rising FB from the bottom to the top. But BRR, RBR, and OBR were all dropped with the fruiting positions （FPs） extending outwards. The optimum range of plant density would be 2-3 plants m-2 and the proper individual plant structure would be 16-19 FBs with 5-7 FPs for cotton production in Hubei Province.
文摘Abstract There are many soft-rock roadway coal mines in China. The surrounding rocks of the high-stress soft-rock roadways in deep mine are especially difficult to be supported using the traditional supporting way. In this study, the south wing rail roadway on the second level of Yunjialing coal mine in China was used as an example to analyze the deformation and failure characteristics and influencing factors of roadway. On this basis, this study proposed the equalized yielding support idea which employs the yielding rings to realize the pressure equalization on the bolts and cables in the section. To achieve this purpose, the first bolt-mesh-cable equalizing pressure yielding support was integrated with the second grouting reinforcement. The results proved that the yield rings of the bolts and cables on the spandrel of the arched roadway firstly developed yielding deformation; then the deformation extended to the vault of the roadway; the bolts and cables achieved a yielding extreme value of 15 and 18 tonnes, respectively. The roadway surrounding rock tended to be stable at the 26th day after the maintenance. The equalizing pressure yielding supporting technology plays a moderate pressure-releasing and actively controlling role on the surrounding rocks in the soft-rock roadway with large deformation.
基金This project has been supported by the Natural Science Foundation of China, 863 High Technology Project and the Special Funds for Major State Basic Research Project (G1999064800).
文摘A better understanding of a recently raised argument on whether there occurs a structure change during yielding has been acquired by using molecular simulation. That is, when monitoring the displacements of all atoms before and after the yield, a structure transition does occur, which is the 'atomic jump' that coordinates the amount of the atoms in the polymer and makes a large step beyond similar to0.05 nm for all those atoms. Results indicate that the complex of polymer chain packing induces the multiple atomic jumps around the yield point. This explains why polymers have a broader yielding peak.
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.31061140457 and 31071360)the National Basic Research Program(Grant Nos.2009CB118603 and 2012CB114306)+1 种基金the National Key Technology Support Program of China(Grant No.2011BAD16B14)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK2009-005)
文摘In 1996,China launched a program to breed super rice or super hybrid rice by combining intersubspecific heterosis with ideal plant types.Today,approximately 80 super rice varieties have been released and some of them show high grain yields of 12-21 t/hm2 in field experiments.The main reasons for the high yields of super rice varieties,compared with those of conventional varieties,can be summarized as follows：more spikelets per panicle and larger sink size （number of spikelets per square meter）;larger leaf area index,longer duration of green leaf,greater photosynthetic rate,higher lodging resistance,greater dry matter accumulation before the heading stage,greater remobilization of pre-stored carbohydrates from stems and leaves to grains during the grain-filling period;and larger root system and greater root activity.However,there are two main problems in super rice production：poor grain-filling of the later-flowering inferior spikelets （in contrast to earlier-flowering superior spikelets）,and low and unstable seed-setting rate.Here,we review recent research advances in the crop physiology of super rice,focusing on biological features,formation of yield components,and population quality.Finally,we suggest further research on crop physiology of super rice.
文摘Using large strain two dimension axisymmetric elasto plastic finite element method and the modified law of mixture, the effects of thermal residual stresses on the yielding behavior of short fiber reinforced metal matrix composite and their dependencies on the material structure parameters (fiber volume fraction, fiber aspect ratio and fiber end distance) were studied. It is demonstrated that the stress strain partition parameter can be used to describe the stress transfer from the matrix to the fiber. The variation of the second derivation of the stress strain partition parameter can be used to determine the elastic modulus, the proportion limit, the initial and final yield strengths. In the presence of thermal residual stress, these yielding properties are asymmetric and are influenced differently by the material structure parameters under tensile and compressive loadings.
基金The authors gratefully acknowledge the support of National Natural Science Foundation of China(No.51991392)the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)of China(No.2019QZKK0904)+1 种基金the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China(No.51922104)Youth Innovation Promotion Association CAS.
文摘Foamed concrete as energy absorption material for high geo-stress soft rock tunnels has been proven to be feasible due to its high compressibility and lightweight.However,the lengthy curing and defoaming problems caused by the cast-in-place method of large-volume foamed concrete remain unsolved.In this study,we propose a novel energy absorber composed of foamed concrete-filled polyethylene(FC-PE)pipe and analyze its deformation and energy absorption capacity via quasi-static lateral compression experiments.Results show that FC-PE pipes exhibit typical three-stage deformation characteristics,comprising the elastic stage,the plastic plateau,and the densification stage.Furthermore,the plateau stress,energy absorption,and specific energy absorption of the specimens are 0.81–1.91 MPa,164–533 J,and 1.4–3.6 J/g,respectively.As the density of the foamed concrete increases,the plateau stress and energy absorption increase significantly.Conversely,the length of the plastic plateau and energy absorption efficiency decrease.Moreover,based on the vertical slice method,progressive compression of core material,and the 6 plastic hinges deformation mechanism of the pipe wall,a theoretical calculation method for effective energy absorption is established and achieves good agreement with experimental results,which is beneficial to the optimization of the composite structure.
基金Supported by Earmarked Fund for China Agriculture Research System(CARS-06-13.5-A10)Special Financial Fund of Hebei Province(F16R03,F17R01)Department of Science and Technology of Hebei Province(17236405D)
文摘The yielding ability and stability and adaptability of eight proso millet varieties from Shanxi,Inner Mongolia,Heilongjiang and Hebei were analyzed and evaluated in different ecological regions including Zhangjiakou,Huanghua and Shijiazhuang in 2015. The results showed that Chishu No. 2 and Jishu No. 2 have stronger yielding ability,and their grain yields were 3 144. 42( highest) and 3 133. 15 kg/ha respectively,ranking first and second in the test varieties. In areas with low fertility,especially in saline-alkali areas,they still have potential for high yields,so they are suitable for promotion in large areas in Hebei Province. Neimi No. 8 and Yanshu No. 11 showed special adaptability under different ecological conditions. They require high-fertility soil and can be planted in the spring millet area in north of Hebei.
基金This work was funded by the National Natural Science Foundation of China(31871573)the Key Research and Development Program of Jiangsu Province,China(BE2017369)the Jiangsu Agriculture Science and Technology Innovation Fund,China(JASTIF)(CX(18)1002).
文摘The traditional soil-based rice seedling production methods for mechanical transplanting are resource-intensive,time consuming and laborious.The improvement and optimization of nutrient management in soil-less nursery raising methods like tandem long-mat seedlings(TLMS)are necessary for the resource-efficient cultivation of rice.In the present study,a controlled-release fertilizer(CRF)-polymer-coated compound fertilizer with 3 months release period(PCCF-3M)was applied as seedling fertilizer(SF),and five different dosages of SF(SF-0,SF-10,SF-20,SF-30,and SF-40)were compared with an organic substrate as the control(CK).Among all SF treatments,the best results were obtained with the application of 20 g/tray of SF(SF-20),as the seedling quality and machine transplanting quality were comparable to those of CK.In contrast,the lower dosages(SF-0 and SF-10)resulted in low nitrogen content and reduced shoot growth,while the higher dosages(SF-30 and SF-40)resulted in toxicity(increased malondialdehyde accumulation)and inhibited the root growth.Similarly,SF-20 increased panicle number(5.6-7.0%)and yield(4.3-5.3%)compared with CK,which might be related to the remaining SF entangled in the roots supporting the tiller growth of rice seedlings in the field.Moreover,SF-20 reduced the seedling block weight(53.1%)and cost of seedling production(23.5%)but increased the gross margin,indicating that it was easy to handle and economical.Taken together,our results indicate that SF-20 is a cost-effective way to promote the growth and transplanting efficiency of rice seedlings.To our knowledge,this study is the first to determine the optimum dosage of CRF for the soil-less production of rice seedlings.
