With the development of cyber-physical systems,system security faces more risks from cyber-attacks.In this work,we study the problem that an external attacker implements covert sensor and actuator attacks with resourc...With the development of cyber-physical systems,system security faces more risks from cyber-attacks.In this work,we study the problem that an external attacker implements covert sensor and actuator attacks with resource constraints(the total resource consumption of the attacks is not greater than a given initial resource of the attacker)to mislead a discrete event system under supervisory control to reach unsafe states.We consider that the attacker can implement two types of attacks:One by modifying the sensor readings observed by a supervisor and the other by enabling the actuator commands disabled by the supervisor.Each attack has its corresponding resource consumption and remains covert.To solve this problem,we first introduce a notion of combined-attackability to determine whether a closedloop system may reach an unsafe state after receiving attacks with resource constraints.We develop an algorithm to construct a corrupted supervisor under attacks,provide a verification method for combined-attackability in polynomial time based on a plant,a corrupted supervisor,and an attacker's initial resource,and propose a corresponding attack synthesis algorithm.The effectiveness of the proposed method is illustrated by an example.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regiona...In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.展开更多
Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for ...Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.展开更多
To address the issue of instability or even imbalance in the orientation and attitude control of quadrotor unmanned aerial vehicles(QUAVs)under random disturbances,this paper proposes a distributed antidisturbance dat...To address the issue of instability or even imbalance in the orientation and attitude control of quadrotor unmanned aerial vehicles(QUAVs)under random disturbances,this paper proposes a distributed antidisturbance data-driven event-triggered fusion control method,which achieves efficient fault diagnosis while suppressing random disturbances and mitigating communication conflicts within the QUAV swarm.First,the impact of random disturbances on the UAV swarm is analyzed,and a model for orientation and attitude control of QUAVs under stochastic perturbations is established,with the disturbance gain threshold determined.Second,a fault diagnosis system based on a high-gain observer is designed,constructing a fault gain criterion by integrating orientation and attitude information from QUAVs.Subsequently,a model-free dynamic linearization-based data modeling(MFDLDM)framework is developed using model-free adaptive control,which efficiently fits the nonlinear control model of the QUAV swarm while reducing temporal constraints on control data.On this basis,this paper constructs a distributed data-driven event-triggered controller based on the staggered communication mechanism,which consists of an equivalent QUAV controller and an event-triggered controller,and is able to reduce the communication conflicts while suppressing the influence of random interference.Finally,by incorporating random disturbances into the controller,comparative experiments and physical validations are conducted on the QUAV platforms,fully demonstrating the strong adaptability and robustness of the proposed distributed event-triggered fault-tolerant control system.展开更多
Energy-regenerative suspension combined with piezoelectric and electromagnetic transduction has evolved into a core technological pathway in advancing automotive design paradigms.With the aim of improving energy harve...Energy-regenerative suspension combined with piezoelectric and electromagnetic transduction has evolved into a core technological pathway in advancing automotive design paradigms.With the aim of improving energy harvesting performance,time-delayed feedback control is widely used in an energy-regenerative suspension system under different external disturbances in this paper.Meanwhile,limited research has addressed the stochastic dynamics of time-delayed nonlinear energy-regenerative suspension systems.Different from previous studies,this work studies the stochastic response and P-bifurcation of the nonlinear energy-regenerative suspension system with time-delayed feedback control.Firstly,an approximately equivalent dimension reduction system is established by the variable transformation method,and then the stationary probability density function of amplitude is obtained by the stochastic averaging method.Secondly,the precision of the method used in this work is verified by comparing the numerical solutions with the analytical results.Finally,based on the stationary probability density function,the influence of system parameters on stochastic P-bifurcation and the mean output power is discussed.展开更多
Although the effectiveness of a tuned viscous mass damper(TVMD)as an inerter-based device for vibration control in civil structures has been thoroughly investigated,there is a lack of systematic research regarding the...Although the effectiveness of a tuned viscous mass damper(TVMD)as an inerter-based device for vibration control in civil structures has been thoroughly investigated,there is a lack of systematic research regarding the application of TVMDs for seismic response control of industrial buildings coupled with mechanical equipment.Therefore,this study proposes ungrounded and grounded TVMDs to effectively utilize the mass of the mechanical equipment and fully exploit the capabilities of the inerter element.An optimal design methodology is developed by pursuing the maximum effective damping ratio and seeking the most rational TVMD control scheme.Validation of TVMD control performance is conducted through time-history analysis based on 20 real seismic ground motions recommended by ATC-40,and by providing a barrel mixer industrial building as a real-life numerical example.The results show that both an ungrounded and grounded TVMD can effectively mitigate the seismic response of the primary structure.Compared to the traditional tuned mass damper(TMD),TVMDs can obtain improved control performance for a given equipment mass ratio.Moreover,an ungrounded TVMD and a TMD show similar working mechanisms that tend to release the displacement of equipment to keep their optimal state,whereas equipment displacement for a grounded TVMD should be strictly limited to provide sufficient anti-force.展开更多
Quantum control allows a wide range of quantum operations employed in molecular physics,nuclear magnetic resonance and quantum information processing.Thanks to the existing microelectronics industry,semiconducting qub...Quantum control allows a wide range of quantum operations employed in molecular physics,nuclear magnetic resonance and quantum information processing.Thanks to the existing microelectronics industry,semiconducting qubits,where quantum information is encoded in spin or charge degree freedom of electrons or nuclei in semiconductor quantum dots,constitute a highly competitive candidate for scalable solid-state quantum technologies.In quantum information processing,advanced control techniques are needed to realize quantum manipulations with both high precision and noise resilience.In this review,we first introduce the basics of various widely-used control methods,including resonant excitation,adabatic passage,shortcuts to adiabaticity,composite pulses,and quantum optimal control.Then we review the practical aspects in applying these methods to realize accurate and robust quantum gates for single semiconductor qubits,such as Loss–DiVincenzo spin qubit,spinglet-triplet qubit,exchange-only qubit and charge qubit.展开更多
The control system for the Experimental Advanced Superconductive Tokamak （EAST） cryogenic system is designed and constructed based on Delta-V DCS （Distribution Control System）, which consists of engineering workst...The control system for the Experimental Advanced Superconductive Tokamak （EAST） cryogenic system is designed and constructed based on Delta-V DCS （Distribution Control System）, which consists of engineering workstations, operator workstations, application workstations, redundant controller units, input/output （I/O） cards and a redundant control network. Our task is to design a supervisory and control system to provide the operator interface for control and monitoring, sending alarms, archiving of selected signals, and other routines to analyze realtime and historic data. The hardware configuration, software structure and control algorithms are illustrated in detail in this paper. Hvpothetic oroblems and further research are also mentioned.展开更多
This paper describes a supervisory hierarchical fuzzy controller （SHFC） for regulating pressure in a real-time pilot pressure control system. The input scaling factor tuning of a direct expert controller is made usi...This paper describes a supervisory hierarchical fuzzy controller （SHFC） for regulating pressure in a real-time pilot pressure control system. The input scaling factor tuning of a direct expert controller is made using the error and process input parameters in a closed loop system in order to obtain better controller performance for set-point change and load disturbances. This on-line tuning method reduces operator involvement and enhances the controller performance to a wide operating range. The hierarchical control scheme consists of an intelligent upper level supervisory fuzzy controller and a lower level direct fuzzy controller. The upper level controller provides a mechanism to the main goal of the system and the lower level controller delivers the solutions to a particular situation. The control algorithm for the proposed scheme has been developed and tested using an ARM7 microcontroller-based embedded target board for a nonlinear pressure process having dead time. To demonstrate the effectiveness, the results of the proposed hierarchical controller, fuzzy controller and conventional proportional-integral （PI） controller are analyzed. The results prove that the SHFC performance is better in terms of stability and robustness than the conventional control methods.展开更多
This paper studied a supervisory control system for a hybrid off-highway electric vehicle under the chargesustaining(CS)condition.A new predictive double Q-learning with backup models(PDQL)scheme is proposed to optimi...This paper studied a supervisory control system for a hybrid off-highway electric vehicle under the chargesustaining(CS)condition.A new predictive double Q-learning with backup models(PDQL)scheme is proposed to optimize the engine fuel in real-world driving and improve energy efficiency with a faster and more robust learning process.Unlike the existing“model-free”methods,which solely follow on-policy and off-policy to update knowledge bases(Q-tables),the PDQL is developed with the capability to merge both on-policy and off-policy learning by introducing a backup model(Q-table).Experimental evaluations are conducted based on software-in-the-loop(SiL)and hardware-in-the-loop(HiL)test platforms based on real-time modelling of the studied vehicle.Compared to the standard double Q-learning(SDQL),the PDQL only needs half of the learning iterations to achieve better energy efficiency than the SDQL at the end learning process.In the SiL under 35 rounds of learning,the results show that the PDQL can improve the vehicle energy efficiency by 1.75%higher than SDQL.By implementing the PDQL in HiL under four predefined real-world conditions,the PDQL can robustly save more than 5.03%energy than the SDQL scheme.展开更多
Supervisory control and protection system of the neutral beam injector （NBI） in the HL-2A tokamak is presented. The system is used for a safe coordination of all the main NBI subsystems. Because the system is based ...Supervisory control and protection system of the neutral beam injector （NBI） in the HL-2A tokamak is presented. The system is used for a safe coordination of all the main NBI subsystems. Because the system is based on computer networks with its transmission medium of optical fiber, its advantages in high operational stability, reliability, security and flexible functional expandability are clearly shown during the NBI commissioning and heating experiment in HL-2A.展开更多
A quite great progress of the supervisory control theory for discrete event systems (DES)has been made in the past nearly twenty years, and now, automata, formal language and Petri nets become the main research tools....A quite great progress of the supervisory control theory for discrete event systems (DES)has been made in the past nearly twenty years, and now, automata, formal language and Petri nets become the main research tools. This paper focus on the Petri nets based supervisory control theory of DES. Firstly, we review the research results in this field, and claim that there generally exists a problem in Petri nets based supervisory control theory of DES, that is, the deadlock caused by the controller introduced to enforce the given specification occurs in the closed-loop systems, especially the deadlock occurs in the closed-loop system in which the original plant is live. Finally, a possible research direction is presented for the solution of this problem.展开更多
FDES(fuzzy discrete event systems) can effectively represent a kind of complicated systems involving deterministic uncertainties and vagueness as well as human subjective observation and judgement from the view of dis...FDES(fuzzy discrete event systems) can effectively represent a kind of complicated systems involving deterministic uncertainties and vagueness as well as human subjective observation and judgement from the view of discrete events, here the information system is divided into some independent intelligent entitative Agents. The concept of information processing state based on Agents was proposed. The processing state of Agent can be judged by some assistant observation parameters about the Agent and its environment around, and the transition among these states can be represented by FDES based on rules. In order to ensure the harmony of the Agents for information processing, its upstream and downstream buffers are considered in the modeling of the Agent system, and the supervisory controller based on FDES is constructed. The processing state of Agent can be adjusted by the supervisory controller to improve the stability of the system and the efficiency of resource utilization during the process according to the control policies. The result of its application was provided to illustrate the validity of the supervisory adjustment.展开更多
After an introduction to the implementation of supervisory computer control (SCC) through networks and the relevant security issues, this paper centers on the core of network security design: intelligent front-end pro...After an introduction to the implementation of supervisory computer control (SCC) through networks and the relevant security issues, this paper centers on the core of network security design: intelligent front-end processor (FEP), encryption/decryption method and authentication protocol. Some other system-specific security measures are also proposed. Although these are examples only, the techniques discussed can also be used in and provide reference for other remote control systems.展开更多
Supervisory control is a very popular paradigm for computer-controlled systems.Knowledge and tracking the control effect of every control operation is crucial to the control tasks.In the paper,we present a message-arr...Supervisory control is a very popular paradigm for computer-controlled systems.Knowledge and tracking the control effect of every control operation is crucial to the control tasks.In the paper,we present a message-array-based mechanism to track control effects in supervisory control software.A novel data type,message array,is designed to efficiently support this tracking mechanism.The operation algorithms,adding algorithm(AA),removing algorithm(RA),and scheduler algorithm(SA)are proposed to operate the tracking messages in message array,which forms the special first input X output(FIXO)strategy of message array.Automatically tracking,recording,and rolling back are the characteristics of our tracking mechanism.We implement this messagearray-based mechanism on the famous human machine interface(HMI)software platform-proficy iFix,and construct experiments to evaluate the performance of the mechanism in various cases.The results show our mechanism can be well satisfied with supervisory control software.展开更多
The paper demonstrates the possibility to enhance the damping of inter-area oscillations using Wide Area Measurement (WAM) based adaptive supervisory controller (ASC) which considers the wide-area signal transmission ...The paper demonstrates the possibility to enhance the damping of inter-area oscillations using Wide Area Measurement (WAM) based adaptive supervisory controller (ASC) which considers the wide-area signal transmission delays. The paper uses an LMI-based iterative nonlinear optimization algorithm to establish a method of designing state-feedback controllers for power systems with a time-varying delay. This method is based on the delay-dependent stabilization conditions obtained by the improved free weighting matrix (IFWM) approach. In the stabilization conditions, the upper bound of feedback signal’s transmission delays is taken into consideration. Combining theoriesof state feedback control and state observer, the ASC is designed and time-delay output feedback robust controller is realized for power system. The ASC uses the input information from Phase Measurement Units (PMUs) in the system and dispatches supplementary control signals to the available local controllers. The design of the ASC is explained in detail and its performance validated by time domain simulations on a New England test power system (NETPS).展开更多
Due to space availability limitations and high land costs,there is an increasing development of multi-floor manufacturing(MFM)systems in urban and industrial areas.The problem of coordination in a multi-floor manufact...Due to space availability limitations and high land costs,there is an increasing development of multi-floor manufacturing(MFM)systems in urban and industrial areas.The problem of coordination in a multi-floor manufacturing process,in the Ramadge Wonham framework,is introduced.The manufacturing chain of each floor and the elevator system are modeled in the form of finite deterministic automata.The models of the multi-floor manufacturing process are parametric with respect to the number of floors and the number of manufacturing machines on each floor.The coordination desired performance is formulated in the form of desired regular languages in analytic forms.The languages are realized by appropriate supervisors in the form of finite deterministic automata.The models of the supervisors are also parametric with respect to the number of floors and the number of manufacturing machines on each floor.The total control of the coordination of the multi-floor manufacturing process is accomplished via a modular supervisory control architecture.The complexity of the supervisors as well as the complexity of the total modular supervisory architecture are determined in analytic forms with respect to the number of floors and the number of manufacturing machines on each floor.The special case of a two floor manufacturing process is presented as an illustrative example.展开更多
In this paper, a hybrid neural-genetic fuzzy system is proposed to control the flow and height of water in the reservoirs of water transfer networks. These controls will avoid probable water wastes in the reservoirs a...In this paper, a hybrid neural-genetic fuzzy system is proposed to control the flow and height of water in the reservoirs of water transfer networks. These controls will avoid probable water wastes in the reservoirs and pressure drops in water distribution networks. The proposed approach combines the artificial neural network, genetic algorithm, and fuzzy inference system to improve the performance of the supervisory control and data acquisition stations through a new control philosophy for instruments and control valves in the reservoirs of the water transfer networks. First, a multi-core artificial neural network model, including a multi-layer perceptron and radial based function, is proposed to forecast the daily consumption of the water in a reservoir. A genetic algorithm is proposed to optimize the parameters of the artificial neural networks. Then, the online height of water in the reservoir and the output of artificial neural networks are used as inputs of a fuzzy inference system to estimate the flow rate of the reservoir inlet. Finally, the estimated inlet flow is translated into the input valve position using a transform control unit supported by a nonlinear autoregressive exogenous model. The proposed approach is applied in the Tehran water transfer network. The results of this study show that the usage of the proposed approach significantly reduces the deviation of the reservoir height from the desired levels.展开更多
基金partially supported by the Science Technology Development Fund,Macao Special Administrative Region(0029/2023/RIA1)the National Research Foundation Singapore under its AI Singapore Programme(AISG2-GC-2023-007)
文摘With the development of cyber-physical systems,system security faces more risks from cyber-attacks.In this work,we study the problem that an external attacker implements covert sensor and actuator attacks with resource constraints(the total resource consumption of the attacks is not greater than a given initial resource of the attacker)to mislead a discrete event system under supervisory control to reach unsafe states.We consider that the attacker can implement two types of attacks:One by modifying the sensor readings observed by a supervisor and the other by enabling the actuator commands disabled by the supervisor.Each attack has its corresponding resource consumption and remains covert.To solve this problem,we first introduce a notion of combined-attackability to determine whether a closedloop system may reach an unsafe state after receiving attacks with resource constraints.We develop an algorithm to construct a corrupted supervisor under attacks,provide a verification method for combined-attackability in polynomial time based on a plant,a corrupted supervisor,and an attacker's initial resource,and propose a corresponding attack synthesis algorithm.The effectiveness of the proposed method is illustrated by an example.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
文摘In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.
基金supported by Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2020261)Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412).
文摘Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.
基金supported in part by the National Natural Science Foundation of China,Grant/Award Number:62003267the Key Research and Development Program of Shaanxi Province,Grant/Award Number:2023-GHZD-33Open Project of the State Key Laboratory of Intelligent Game,Grant/Award Number:ZBKF-23-05。
文摘To address the issue of instability or even imbalance in the orientation and attitude control of quadrotor unmanned aerial vehicles(QUAVs)under random disturbances,this paper proposes a distributed antidisturbance data-driven event-triggered fusion control method,which achieves efficient fault diagnosis while suppressing random disturbances and mitigating communication conflicts within the QUAV swarm.First,the impact of random disturbances on the UAV swarm is analyzed,and a model for orientation and attitude control of QUAVs under stochastic perturbations is established,with the disturbance gain threshold determined.Second,a fault diagnosis system based on a high-gain observer is designed,constructing a fault gain criterion by integrating orientation and attitude information from QUAVs.Subsequently,a model-free dynamic linearization-based data modeling(MFDLDM)framework is developed using model-free adaptive control,which efficiently fits the nonlinear control model of the QUAV swarm while reducing temporal constraints on control data.On this basis,this paper constructs a distributed data-driven event-triggered controller based on the staggered communication mechanism,which consists of an equivalent QUAV controller and an event-triggered controller,and is able to reduce the communication conflicts while suppressing the influence of random interference.Finally,by incorporating random disturbances into the controller,comparative experiments and physical validations are conducted on the QUAV platforms,fully demonstrating the strong adaptability and robustness of the proposed distributed event-triggered fault-tolerant control system.
基金Project supported by the National Natural Science Foundation of China(Grant No.12002089)the Science and Technology Projects in Guangzhou(Grant No.2023A04J1323)UKRI Horizon Europe Guarantee(Marie SklodowskaCurie Fellowship)(Grant No.EP/Y016130/1)。
文摘Energy-regenerative suspension combined with piezoelectric and electromagnetic transduction has evolved into a core technological pathway in advancing automotive design paradigms.With the aim of improving energy harvesting performance,time-delayed feedback control is widely used in an energy-regenerative suspension system under different external disturbances in this paper.Meanwhile,limited research has addressed the stochastic dynamics of time-delayed nonlinear energy-regenerative suspension systems.Different from previous studies,this work studies the stochastic response and P-bifurcation of the nonlinear energy-regenerative suspension system with time-delayed feedback control.Firstly,an approximately equivalent dimension reduction system is established by the variable transformation method,and then the stationary probability density function of amplitude is obtained by the stochastic averaging method.Secondly,the precision of the method used in this work is verified by comparing the numerical solutions with the analytical results.Finally,based on the stationary probability density function,the influence of system parameters on stochastic P-bifurcation and the mean output power is discussed.
基金National Natural Science Foundation of China under Grant Nos.52408327 and 52278306Key Research and Development Program of Hunan Province,China under Grant No.2022SK2096+3 种基金Science and Technology Progress and Innovation Project of the Department of Transportation of Hunan Province,China under Grant No.201912Natural Science Foundation of Hunan Province,China under Grant No.2024JJ6198Scientific Research Project of the Education Department of Hunan Province,China under Grant No.25A0645Emergency Management Science and Technology Project of the Emergency Management Department of Hunan Province,China under Grant No.yjtkjxm_202406。
文摘Although the effectiveness of a tuned viscous mass damper(TVMD)as an inerter-based device for vibration control in civil structures has been thoroughly investigated,there is a lack of systematic research regarding the application of TVMDs for seismic response control of industrial buildings coupled with mechanical equipment.Therefore,this study proposes ungrounded and grounded TVMDs to effectively utilize the mass of the mechanical equipment and fully exploit the capabilities of the inerter element.An optimal design methodology is developed by pursuing the maximum effective damping ratio and seeking the most rational TVMD control scheme.Validation of TVMD control performance is conducted through time-history analysis based on 20 real seismic ground motions recommended by ATC-40,and by providing a barrel mixer industrial building as a real-life numerical example.The results show that both an ungrounded and grounded TVMD can effectively mitigate the seismic response of the primary structure.Compared to the traditional tuned mass damper(TMD),TVMDs can obtain improved control performance for a given equipment mass ratio.Moreover,an ungrounded TVMD and a TMD show similar working mechanisms that tend to release the displacement of equipment to keep their optimal state,whereas equipment displacement for a grounded TVMD should be strictly limited to provide sufficient anti-force.
基金support by the National Natural Science Foundation of China(Nos.12174379,E31Q02BG)the Chinese Academy of Sciences(Nos.E0SEBB11,E27RBB11)+1 种基金the Innovation Program for Quantum Science and Technology(No.2021ZD0302300)Chinese Academy of Sciences Project for Young Scientists in Basic Research(No.YSBR-090)。
文摘Quantum control allows a wide range of quantum operations employed in molecular physics,nuclear magnetic resonance and quantum information processing.Thanks to the existing microelectronics industry,semiconducting qubits,where quantum information is encoded in spin or charge degree freedom of electrons or nuclei in semiconductor quantum dots,constitute a highly competitive candidate for scalable solid-state quantum technologies.In quantum information processing,advanced control techniques are needed to realize quantum manipulations with both high precision and noise resilience.In this review,we first introduce the basics of various widely-used control methods,including resonant excitation,adabatic passage,shortcuts to adiabaticity,composite pulses,and quantum optimal control.Then we review the practical aspects in applying these methods to realize accurate and robust quantum gates for single semiconductor qubits,such as Loss–DiVincenzo spin qubit,spinglet-triplet qubit,exchange-only qubit and charge qubit.
基金The project supported by the National Meg-science Engineering Project of the Chinese Government
文摘The control system for the Experimental Advanced Superconductive Tokamak （EAST） cryogenic system is designed and constructed based on Delta-V DCS （Distribution Control System）, which consists of engineering workstations, operator workstations, application workstations, redundant controller units, input/output （I/O） cards and a redundant control network. Our task is to design a supervisory and control system to provide the operator interface for control and monitoring, sending alarms, archiving of selected signals, and other routines to analyze realtime and historic data. The hardware configuration, software structure and control algorithms are illustrated in detail in this paper. Hvpothetic oroblems and further research are also mentioned.
文摘This paper describes a supervisory hierarchical fuzzy controller （SHFC） for regulating pressure in a real-time pilot pressure control system. The input scaling factor tuning of a direct expert controller is made using the error and process input parameters in a closed loop system in order to obtain better controller performance for set-point change and load disturbances. This on-line tuning method reduces operator involvement and enhances the controller performance to a wide operating range. The hierarchical control scheme consists of an intelligent upper level supervisory fuzzy controller and a lower level direct fuzzy controller. The upper level controller provides a mechanism to the main goal of the system and the lower level controller delivers the solutions to a particular situation. The control algorithm for the proposed scheme has been developed and tested using an ARM7 microcontroller-based embedded target board for a nonlinear pressure process having dead time. To demonstrate the effectiveness, the results of the proposed hierarchical controller, fuzzy controller and conventional proportional-integral （PI） controller are analyzed. The results prove that the SHFC performance is better in terms of stability and robustness than the conventional control methods.
基金Project(KF2029)supported by the State Key Laboratory of Automotive Safety and Energy(Tsinghua University),ChinaProject(102253)supported partially by the Innovate UK。
文摘This paper studied a supervisory control system for a hybrid off-highway electric vehicle under the chargesustaining(CS)condition.A new predictive double Q-learning with backup models(PDQL)scheme is proposed to optimize the engine fuel in real-world driving and improve energy efficiency with a faster and more robust learning process.Unlike the existing“model-free”methods,which solely follow on-policy and off-policy to update knowledge bases(Q-tables),the PDQL is developed with the capability to merge both on-policy and off-policy learning by introducing a backup model(Q-table).Experimental evaluations are conducted based on software-in-the-loop(SiL)and hardware-in-the-loop(HiL)test platforms based on real-time modelling of the studied vehicle.Compared to the standard double Q-learning(SDQL),the PDQL only needs half of the learning iterations to achieve better energy efficiency than the SDQL at the end learning process.In the SiL under 35 rounds of learning,the results show that the PDQL can improve the vehicle energy efficiency by 1.75%higher than SDQL.By implementing the PDQL in HiL under four predefined real-world conditions,the PDQL can robustly save more than 5.03%energy than the SDQL scheme.
文摘Supervisory control and protection system of the neutral beam injector （NBI） in the HL-2A tokamak is presented. The system is used for a safe coordination of all the main NBI subsystems. Because the system is based on computer networks with its transmission medium of optical fiber, its advantages in high operational stability, reliability, security and flexible functional expandability are clearly shown during the NBI commissioning and heating experiment in HL-2A.
基金Supported in part by the National Outstanding Youth Science Foundation of P.R.China (60025308) Doctor Degree Program Foundation of P.R.China (20020335103), Scientific Research Program of Department of Education of Zhejiang Province, P.R.China (20040149)
文摘A quite great progress of the supervisory control theory for discrete event systems (DES)has been made in the past nearly twenty years, and now, automata, formal language and Petri nets become the main research tools. This paper focus on the Petri nets based supervisory control theory of DES. Firstly, we review the research results in this field, and claim that there generally exists a problem in Petri nets based supervisory control theory of DES, that is, the deadlock caused by the controller introduced to enforce the given specification occurs in the closed-loop systems, especially the deadlock occurs in the closed-loop system in which the original plant is live. Finally, a possible research direction is presented for the solution of this problem.
文摘FDES(fuzzy discrete event systems) can effectively represent a kind of complicated systems involving deterministic uncertainties and vagueness as well as human subjective observation and judgement from the view of discrete events, here the information system is divided into some independent intelligent entitative Agents. The concept of information processing state based on Agents was proposed. The processing state of Agent can be judged by some assistant observation parameters about the Agent and its environment around, and the transition among these states can be represented by FDES based on rules. In order to ensure the harmony of the Agents for information processing, its upstream and downstream buffers are considered in the modeling of the Agent system, and the supervisory controller based on FDES is constructed. The processing state of Agent can be adjusted by the supervisory controller to improve the stability of the system and the efficiency of resource utilization during the process according to the control policies. The result of its application was provided to illustrate the validity of the supervisory adjustment.
文摘After an introduction to the implementation of supervisory computer control (SCC) through networks and the relevant security issues, this paper centers on the core of network security design: intelligent front-end processor (FEP), encryption/decryption method and authentication protocol. Some other system-specific security measures are also proposed. Although these are examples only, the techniques discussed can also be used in and provide reference for other remote control systems.
文摘Supervisory control is a very popular paradigm for computer-controlled systems.Knowledge and tracking the control effect of every control operation is crucial to the control tasks.In the paper,we present a message-array-based mechanism to track control effects in supervisory control software.A novel data type,message array,is designed to efficiently support this tracking mechanism.The operation algorithms,adding algorithm(AA),removing algorithm(RA),and scheduler algorithm(SA)are proposed to operate the tracking messages in message array,which forms the special first input X output(FIXO)strategy of message array.Automatically tracking,recording,and rolling back are the characteristics of our tracking mechanism.We implement this messagearray-based mechanism on the famous human machine interface(HMI)software platform-proficy iFix,and construct experiments to evaluate the performance of the mechanism in various cases.The results show our mechanism can be well satisfied with supervisory control software.
文摘The paper demonstrates the possibility to enhance the damping of inter-area oscillations using Wide Area Measurement (WAM) based adaptive supervisory controller (ASC) which considers the wide-area signal transmission delays. The paper uses an LMI-based iterative nonlinear optimization algorithm to establish a method of designing state-feedback controllers for power systems with a time-varying delay. This method is based on the delay-dependent stabilization conditions obtained by the improved free weighting matrix (IFWM) approach. In the stabilization conditions, the upper bound of feedback signal’s transmission delays is taken into consideration. Combining theoriesof state feedback control and state observer, the ASC is designed and time-delay output feedback robust controller is realized for power system. The ASC uses the input information from Phase Measurement Units (PMUs) in the system and dispatches supplementary control signals to the available local controllers. The design of the ASC is explained in detail and its performance validated by time domain simulations on a New England test power system (NETPS).
基金Open access funding provided by HEAL-Link Greece.
文摘Due to space availability limitations and high land costs,there is an increasing development of multi-floor manufacturing(MFM)systems in urban and industrial areas.The problem of coordination in a multi-floor manufacturing process,in the Ramadge Wonham framework,is introduced.The manufacturing chain of each floor and the elevator system are modeled in the form of finite deterministic automata.The models of the multi-floor manufacturing process are parametric with respect to the number of floors and the number of manufacturing machines on each floor.The coordination desired performance is formulated in the form of desired regular languages in analytic forms.The languages are realized by appropriate supervisors in the form of finite deterministic automata.The models of the supervisors are also parametric with respect to the number of floors and the number of manufacturing machines on each floor.The total control of the coordination of the multi-floor manufacturing process is accomplished via a modular supervisory control architecture.The complexity of the supervisors as well as the complexity of the total modular supervisory architecture are determined in analytic forms with respect to the number of floors and the number of manufacturing machines on each floor.The special case of a two floor manufacturing process is presented as an illustrative example.
文摘In this paper, a hybrid neural-genetic fuzzy system is proposed to control the flow and height of water in the reservoirs of water transfer networks. These controls will avoid probable water wastes in the reservoirs and pressure drops in water distribution networks. The proposed approach combines the artificial neural network, genetic algorithm, and fuzzy inference system to improve the performance of the supervisory control and data acquisition stations through a new control philosophy for instruments and control valves in the reservoirs of the water transfer networks. First, a multi-core artificial neural network model, including a multi-layer perceptron and radial based function, is proposed to forecast the daily consumption of the water in a reservoir. A genetic algorithm is proposed to optimize the parameters of the artificial neural networks. Then, the online height of water in the reservoir and the output of artificial neural networks are used as inputs of a fuzzy inference system to estimate the flow rate of the reservoir inlet. Finally, the estimated inlet flow is translated into the input valve position using a transform control unit supported by a nonlinear autoregressive exogenous model. The proposed approach is applied in the Tehran water transfer network. The results of this study show that the usage of the proposed approach significantly reduces the deviation of the reservoir height from the desired levels.
