1 Introduction Situated in the Iberian Peninsula,Lake Cisóis a sulphide-rich lake that belongs to the Ba?oles karstic system in Girona,north-eastern part of Spain.Lake Cisóis holomictic,and covers a small ar...1 Introduction Situated in the Iberian Peninsula,Lake Cisóis a sulphide-rich lake that belongs to the Ba?oles karstic system in Girona,north-eastern part of Spain.Lake Cisóis holomictic,and covers a small area of around 650 m2 and展开更多
In consideration of the composition characteristics and quality requirements of sulphurous free-cutting gear steel, the rational measures of sulfur control, calcium treatment and key technologies of continuous casting...In consideration of the composition characteristics and quality requirements of sulphurous free-cutting gear steel, the rational measures of sulfur control, calcium treatment and key technologies of continuous casting process are applied in the development of a full-line operation of LD-Billet continuous casting on steelmaking with semi-steel, which suggests an economic production of the steel has been realized. Test results show that the average retrieval rate of sulphurous alloy in the process of RH treatment is 95.3% and sulfur content of products is stability. Otherwise, content of T[O] in casting billet is in the range of 11×10-6 ~ 18×10-6 with average value is 14.7×10-6.Based on this, the billets have good surface quality and internal quality.展开更多
The sulfurous water deposit exploitation in volcanic, swamp, or wetland regions, represents an alternative option for potable water supply in cities and communities around the world. However, before its consumption, i...The sulfurous water deposit exploitation in volcanic, swamp, or wetland regions, represents an alternative option for potable water supply in cities and communities around the world. However, before its consumption, it must be treated by the application of physicochemical or biological methods with the ability to separate high contents in sulfates, hydrogen sulphite and sulphides which have laxative, allergic and toxic properties in humans. Conventional methods require the supply of chemical compounds or the adequate control of different parameters such as pH, temperature, etc., and the constant maintenance within their reactors. For these reasons, the systems could have elevated operating costs and require additional steps to enable the treatment of its separated products and the final disposal of its residual waste generated. In this research, compound parabolic collectors are implemented for the use of solar energy radiation, UV-B type, in Solar Advanced Oxidation Processes in H2O2/O3/UVsolar homogeneous phase. Its application during the pre-treatment of four sulfur water wells from the region of Puebla, Mexico, demonstrated its ability to transform their sulfur compounds in sulfates of easy removal by a later stage of reverse osmosis, in an approximately 15 min treatment time process.展开更多
Sulphur(S)is essential for the quality of oilseed crops,ranking as the fourth major nutrient after nitrogen(N),phosphorus(P),and potassium(K).While crops need sulphur in slightly lower amounts than phosphorus,maintain...Sulphur(S)is essential for the quality of oilseed crops,ranking as the fourth major nutrient after nitrogen(N),phosphorus(P),and potassium(K).While crops need sulphur in slightly lower amounts than phosphorus,maintaining optimum sulphur levels is crucial for oilseed yield and quality.Factors such as sulphur dynamics,impact of deficiency,application methods,and climate change must be addressed to improve agricultural practices.In South Asian countries like India,Pakistan,and Bangladesh,oilseeds are vital to the agricultural economy,supporting food security,livelihoods,and economic growth.However,climate change,marginal land cultivation,and a shift to more profitable crops like wheat and maize have led to a decline in oilseed productivity.Sulphur is particularly important for vital plant functions,including protein synthesis,chlorophyll formation,and resistance to abiotic stress.Proper management of sulphur can significantly enhance the yield,oil content,and seed quality.Sulphur fertilization improves crop resilience to pests,diseases,and environmental stresses,resulting in healthier plants.To optimize oilseed production,best practices for sulphur management like integrated nutrient management,regular soil testing,and the strategic application of sulphur-enriched fertilizers must be adopted.Despite its significance,many South Asian soils suffer from sulphur deficiency due to inadequate replenishment and reliance on high-analysis fertilizers.By enhancing sulphur availability,oilseed producers can significantly increase crop yields,improve oil content,and promote overall plant health,contributing to the agricultural economy and food security in the region.This manuscript aims to evaluate the critical role of sulphur in enhancing the yield,oil quality,and stress resilience of oilseed crops in South Asia.展开更多
In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studi...In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studied,the collision behavior mode of particles was determined,the spatial saltation law of particles was investigated,the spatial functional axis of beds was determined,and the saltation separation period of particles was determined.The test results show that:When separation bed provides inlet airflow velocity(U_(in)) is 2.55 m/s,the airflow distribution interval of I,II and III areas were U_(I)=2.55-2.57 m/s,U_(II)=1.33-1.35 m/s,U_(III)=0.35-0.38 m/s,respectively;when separation bed vibration amplitude (A)A=2.4-2.5 mm,separation bed vibration frequency (f) f=23-24 Hz,the desulfurization effect is the best.When vibration intensity (Γ)Γ=1.22,U_(in)=1.05 m/s,the particles have disordered contact and collision behavior.WhenΓ=14.89,U_(in)=3.18 m/s,the particles have a transition cataclastic collision.WhenΓ=5.80,U_(in)=2.55 m/s,the particles have directional collision behavior.It is determined that the OX axis is the transverse stable diffusion axis of the material,the OY axis is the longitudinal gradient transport axis of the material,and the OZ axis is the vertical density cascade distribution axis of the material.When separation time (T) T=0-10 s was the period of disorderly diffusion and mixing of particles,T=10-20 s was the period of directional migration and stratification of particles,and T=20-30 s was the period of cascade distribution and separation of particles.Finally,separation experiments conducted under optimal operating parameters demonstrated that the clean coal yield was 72.02%with a sulfur content of 0.98%.展开更多
The Boulon Djounga eastern perimeter is part of the Tiawa operating permit of the Société des Mines du Liptako (SML), located in the central southwestern part of Liptako (Niger). In this study, we used field...The Boulon Djounga eastern perimeter is part of the Tiawa operating permit of the Société des Mines du Liptako (SML), located in the central southwestern part of Liptako (Niger). In this study, we used field data, Reverse Circulation (RC) surveys and chemical analyzes of gold to determine the characteristics of gold and its mineralization style. The eastern perimeter of Boulon Djounga is represented by a succession of metabasalts and metasediments both intersected by intrusions of quartz and dolerite dykes, and covered by sandstone and clayey rocks. Gold is present in low contents (0.00 - 0.30 ppm) in the sedimentary cover and in medium (0.30 - 1.00 ppm) or high contents (1.00 - 4.534 ppm) in the metasediments, and in the gray quartz veins and locally in the volcanics. It exists in a disseminated state or in a concentrated state in the surrounding areas in the form of discrete grains associated with sulphurous minerals (pyrite: FeS<sub>2</sub>, chalcopyrite: CuFeS<sub>2</sub> or arsenopyrite: FeAsS). The presence of gold in the quartz veins, and the NE-SW and NW-SE orientations of the ore bodies suggest that the eastern Boulon Djounga gold mineralization would be established during a late magmatic extensive phase.展开更多
Driven by endless solar energy,photocatalytic H2 evolution from water splitting and CO_(2) conversion to hydrocarbon fuels over semiconductor photocatalysts are of great potential to simultaneously settle the greenhou...Driven by endless solar energy,photocatalytic H2 evolution from water splitting and CO_(2) conversion to hydrocarbon fuels over semiconductor photocatalysts are of great potential to simultaneously settle the greenhouse effect and energy shortage.Herein,Cr-doped zinc sulfide(ZnS)with accompanying sulphur vacancies(Vs)photocatalytic materials is developed by a facile hydrothermal method.The Cr dopants centralize photoinduced holes and Vs trap electrons,forming a synergistic effect for accelerating charge separation and transfer.The reaction energy barrier for both H2 evolution and CO_(2) reduction has been optimized.Therefore,in the absence of a cocatalyst,the optimal catalyst(Zn_(0.94) Cr_(0.06) S)achieves an out-standing H_(2) evolution activity of 20.3 mmol g^(-1) h^(-1),which is approximately 2.9 times higher than 6.9 mmol g^(-1) h^(-1) for pristine ZnS.In addition,in the gas-solid reaction system without co-catalysts or sacrificial agents,the Zn_(0.94) Cr_(0.06) S exhibits a considerable CO evolution rate of 19.56μmol g^(-1) h^(-1),about 10.1 times higher than ZnS(1.94μmol g^(-1) h^(-1)).Both the performances for H_(2) evolution and CO_(2) reduction of Zn_(0.94) Cr_(0.06) S outperform most of the previously reported photocatalysts.Particularly,the Zn_(0.94) Cr_(0.06) S possesses superior stability,the photoactivity of which exhibits no noticeable deactiva-tion after six cycles’reactions.This work may shed light on the rational design and fabrication of highly efficient materials via combining individual element doping and defect engineering.展开更多
[Objective] The paper aimed to discuss the relationship between sulfur contents of mosses and the concentration of SO2-4 and the source of Atmospheric sulfur in Nanchang.[Method] 29 moss samples （Bryohaplocladium mic...[Objective] The paper aimed to discuss the relationship between sulfur contents of mosses and the concentration of SO2-4 and the source of Atmospheric sulfur in Nanchang.[Method] 29 moss samples （Bryohaplocladium micriophyllum （Hedw.） R.Watanabe et Iwats） were collected from four sampling points,including North campus and Qianhu campus of Nanchang Power Station were determined.[Result] The results showed that sulfur contents of mosses tissues in North campus of Nanchang University （0.45±0.059%） were higher than Qianhu campus of Nanchang University （0.26±0.002%）,which coincided with the changing law of the concentration of SO2-4.Sulphur isotope of mosses tissues was-0.64‰-9.71‰.Sulphur isotope of mosses tissues in Meling （4.02‰-9.71‰） was higher than Qianhu campus of Nanchang University （0.55‰-0.56‰） and power plant （-0.64‰-0.45‰）.[Conclusion] Relationship between sulphur contents and sulphur isotopes of mosses tissues showed sulfur source of sulphur deposition in Nanchang city was mainly affected by 34S-enriched sulphur transported from northerly air masses and biogenic sulfur.展开更多
In the research, available sulphur in 4 700 soil samples was tested and analyzed in 2006-2007 in Dengzhou, and the results showed that available sulphur was insufficient in farmlands in Dengzhou for cereal crop and ab...In the research, available sulphur in 4 700 soil samples was tested and analyzed in 2006-2007 in Dengzhou, and the results showed that available sulphur was insufficient in farmlands in Dengzhou for cereal crop and about 60% farmlands with available sulphur belong to the farmlands with potential shortage of available sulphur for Cruciferae, Liliaceae and Leguminosae. Meanwhile, the producing causes were analyzed from the perspectives of fertilization structure and planting structure and the countermeasures were proposed in terms of sulphur movements in plants and characters.展开更多
New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles （10–10000 nm in dia...New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles （10–10000 nm in diameter） obtained in the summer of 2008,at a suburban site in Beijing,China.We firstly reported the pollution level,particle number size distribution,diurnal variation of the particle number size distribution and then introduced the characteristics of the particle formation processes.The results showed that the number concentration of ultrafine particles was much lower than the values measured in other urban or suburban areas in previous studies.Sharp increases of ultrafine particle count were frequently observed at noon.An examination of the diurnal pattern suggested that the burst of ultrafine particles was mainly due to new particle formation promoted by photochemical processes.In addition,high relative humidity was a key factor driving the growth of the particles in the afternoon.During the 2-month observations,new particle formation from homogeneous nucleation was observed for 42.7% of the study period.The average growth rate of newly formed particles was 3.2 nm/hr,and varied from 1.2 to 8.0 nm/hr.The required concentration of condensable vapor was 4.4×10 7 cm-3,and its source rate was 1.2×10 6 cm-3 sec-1.Further calculation on the source rate of sulphuric acid vapor indicated that the average participation of sulphuric acid to particle growth rates was 28.7%.展开更多
The recovery of nickel from laterite ore with sulphuric acid under the effect of microwave irradiation was studied.The experimental results indicated that the extraction rate of nickel was influenced by reaction time,...The recovery of nickel from laterite ore with sulphuric acid under the effect of microwave irradiation was studied.The experimental results indicated that the extraction rate of nickel was influenced by reaction time,sulphuric acid concentration,and temperature,especially by microwave power.The results obtained from the experiments of orthogonal arrays showed that the optimum conditions of sulphuric acid concentration,reaction time,microwave power,and temperature were 25 vol.%,1.5 h,600 W,and 90°C,respectively.Under the optimal conditions,the nickel recovery could reach approximately 90.8%,which was higher than that obtained by conventional water bath heating.Kinetic experiments showed that the leaching of nickel in a sulphuric acid medium was controlled by chemical reaction occurring on the surface of laterite ore.The apparent activation energy was 38.9 kJ/mol.Microwave heating technology is efficient,clean,and easy to control and facilitate continuous processing of materials.展开更多
The aim of this work was to investigate the leaching of chalcopyrite concentrate in hydrochloric acid with hydrogen peroxide as a strong oxidizing agent. The effects of the leaching variables on metal extraction, such...The aim of this work was to investigate the leaching of chalcopyrite concentrate in hydrochloric acid with hydrogen peroxide as a strong oxidizing agent. The effects of the leaching variables on metal extraction, such as stirring speed, solid-to-liquid ratio, temperature and HCl and H2O2 concentrations, were studied. The maximum final copper extraction of 33% was attained with 3.0 mol/L H2O2 in 0.5 mol/L HCl at room temperature after 180 min of the reaction. The results showed that the copper extraction was increased in the first 60 min of reaction, after which it essentially ceased due to the fast catalytic decomposition of hydrogen peroxide. Further, solid-to-liquid ratio affected the copper extraction significantly and the highest copper extraction was obtained in the most dilute suspension（i.e., S/L ratio of 1：100）. The dissolution process was described by the first order kinetics equation. The apparent activation energy of 19.6 k J/mol suggested that the dissolution process was under diffusion control. The reaction orders for HCl and H2O2 were established to be 0.30 and 0.53, respectively. The results of the XRD and SEM/EDS analysis of the leaching residue indicated the generation of the elemental sulphur on mineral surfaces which tended to inhibit the leaching rate.展开更多
The process of lignite desulphurization via its treatment by an oxidant(air or air–steam mixture)has been studied.The research objective was useful determination of steam application in oxidative lignite desulphuriza...The process of lignite desulphurization via its treatment by an oxidant(air or air–steam mixture)has been studied.The research objective was useful determination of steam application in oxidative lignite desulphurization.It has been proved that the water steam should be included in the oxidant composition to increase the hydrogen sulphide and combustible constituent content in the gases obtained during the processes under research.The impact of factors which affect the reactions between solid(in our case–lignite)and gaseous reagent(oxidant,i.e.air and or air–steam mixture)upon the research process has been investigated,if these reactions occur in the kinetic area.Such factors are linear rate of oxidant movement and coal grain size.The values of oxidant movement linear rate and coal grain size,which the reaction transfer from pyrite sulphur and organic content of lignite from diffusion into kinetic area occurs by,have been determined.Under these‘‘transfer’’conditions,the values of coefficients of oxidant mass transfer(β,m/s)as well as Sherwood criteria and boiling layer differences have been calculated.展开更多
In order to enhance the lead and zinc recovery from the refractory Pb-Zn oxide ore, a new technology was developed based on sulfidation roasting with sulphur by temperature gradient method. The solid-liquid reaction s...In order to enhance the lead and zinc recovery from the refractory Pb-Zn oxide ore, a new technology was developed based on sulfidation roasting with sulphur by temperature gradient method. The solid-liquid reaction system was established and the sulfidation thermodynamics of lead and zinc carbonate was calculated with the software HSC 5.0. The effects of roasting temperature,molar ratio of sulphur to lead and zinc carbonate and reaction time in the first step roasting, and holding temperature and time in the second roasting on the sulfidation extent were studied at a laboratory-scale. The experimental results show that the sulfidation extents of lead and zinc are 96.50% and 97.29% under the optimal conditions, respectively, and the artificial galena, sphalerite and wurtzite were formed. By the novel sulfidizing process, it is expected that the sulphides can be recovered by conventional flotation technology.展开更多
The catalytic effects of single and mixed catalysts, i.e. single 3%Ca and 5%Na-BL（black liquor） catalysts and mixed 3%Ca＋5%Na-BL catalyst, on carbon conversion, gasification reaction rate constant and activation en...The catalytic effects of single and mixed catalysts, i.e. single 3%Ca and 5%Na-BL（black liquor） catalysts and mixed 3%Ca＋5%Na-BL catalyst, on carbon conversion, gasification reaction rate constant and activation energy, relative amount of harmful pollutant like sulphur containing gases have been investigated by thermogravimetry in steam gasification under temperature 750℃ to 950℃ at ambient pressure for three high-metarnorphous anthracites （Longyan, Fenghai and Youxia coals in Fujian Province）. The mixed catalyst of 3%Ca＋5%Na-BL increases greatly the carbon conversion and gasification rate constant by accelerating the gasification reaction C＋H2O→CO＋H2 due to presence of alkali surfacecompounds [COM], [CO2M] and exchanged calcium phenolate and calcium carboxylate （-COO）2. By adding CaCO3 into BL catalyst in gasification, in addition to improving the catalyst function and enhancing the carbon conversion, the effective desulphurization is also achieved, but the better operating temperature should be below 900℃. The homogenous and shrinking core models can be successfully employed to correlate the relations between the conversion and the gasification .time .and to estimate the reaction rate constant, The reaction acUvaUon energy and pre-exponential factor are estimated and the activation energy for mixed catalyst is in a range of 98.72-166.92 kJ·mol^-1, much less than 177.50-196.46 kJ·mol^-1 for non-catalytic steam gasification for three experimental coals.展开更多
Water shortage has threatened sustainable development of agriculture globally as well as in the North China Plain（NCP）.Irrigation,as the most effective way to increase food production in dry land,may not be readily ...Water shortage has threatened sustainable development of agriculture globally as well as in the North China Plain（NCP）.Irrigation,as the most effective way to increase food production in dry land,may not be readily available in the situation of drought.One of the alternatives is to supply plants with enough nutrients so that they can be more sustainable to the water stress.The objective of this study was to explore effects of irrigation and sulphur（S）application on water consumption,dry matter accumulation（DMA）,and grain yield of winter wheat in NCP.Three irrigation regimes including no irrigation（rainfed,I0）during the whole growth period,once irrigation only at jointing stage（90 mm,I1）,and twice respective irrigation at jointing and anthesis stages（90 mm plus 90 mm,I2）,and two levels of S application including 0S0and 60 kg ha^–1（S60）were designed in the field experiment in NCP.Results showed that increasing irrigation times significantly increased mean grain yield of wheat by 12.5–23.7%and nitrogen partial factor productivity（NPFP）by 21.2–45.0%in two wheat seasons,but markedly decreased crop water use efficiency（YWUE）.Furthermore,S supply 60 kg ha^–1 significantly increased mean grain yield,YWUE,IWUE and NPFP by 5.6,6.1,23.2,and 5.6%（across two wheat seasons）,respectively.However,we also found that role of soil moisture prior to S application was one of important greater factors on improving the absorption and utilization of storage water and nutrients of soil.Thus,water supply is still the most important factor to restrict the growth of wheat in the present case of NCP,supplying 60 kg ha^–1 S with once irrigation 90 mm at the jointing stage is a relatively appropriate recommended combination to improve grain yield and WUE of wheat when saving water resources is be considered in irrigated wheat farmlands of NCP.展开更多
Valuable metal extraction technology from thermal power plant fly ash is limited.In the present study,aluminium is extracted from fly ash as highly pure aluminium sulphate(>99.0%)by leaching with sulphuric acid,fol...Valuable metal extraction technology from thermal power plant fly ash is limited.In the present study,aluminium is extracted from fly ash as highly pure aluminium sulphate(>99.0%)by leaching with sulphuric acid,followed by pre-concentration and successive crystallization.Two types of fly ashes from different sources,i.e.,Talcher Thermal Power Station(TTPS)and Vedanta Aluminium Company Limited(VAL)were chosen for comparative study on the extraction of aluminium as aluminium sulphate.The product is characterized by powder X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR)and thermogravimetric analysis(TGA).Purity of aluminium sulphate was also investigated by inductively coupled plasma?optical emission spectrometry(ICP?OES).The extraction efficiency of aluminium depends on the varied solid-to-liquid ratio(fly ash:18mol/L H2SO4,g/mL)and particle size of fly ashes.Physico-chemical analysis indicates that the obtained product is Al2(SO4)3·18H2O,having low iron content(0.08%).展开更多
文摘1 Introduction Situated in the Iberian Peninsula,Lake Cisóis a sulphide-rich lake that belongs to the Ba?oles karstic system in Girona,north-eastern part of Spain.Lake Cisóis holomictic,and covers a small area of around 650 m2 and
文摘In consideration of the composition characteristics and quality requirements of sulphurous free-cutting gear steel, the rational measures of sulfur control, calcium treatment and key technologies of continuous casting process are applied in the development of a full-line operation of LD-Billet continuous casting on steelmaking with semi-steel, which suggests an economic production of the steel has been realized. Test results show that the average retrieval rate of sulphurous alloy in the process of RH treatment is 95.3% and sulfur content of products is stability. Otherwise, content of T[O] in casting billet is in the range of 11×10-6 ~ 18×10-6 with average value is 14.7×10-6.Based on this, the billets have good surface quality and internal quality.
文摘The sulfurous water deposit exploitation in volcanic, swamp, or wetland regions, represents an alternative option for potable water supply in cities and communities around the world. However, before its consumption, it must be treated by the application of physicochemical or biological methods with the ability to separate high contents in sulfates, hydrogen sulphite and sulphides which have laxative, allergic and toxic properties in humans. Conventional methods require the supply of chemical compounds or the adequate control of different parameters such as pH, temperature, etc., and the constant maintenance within their reactors. For these reasons, the systems could have elevated operating costs and require additional steps to enable the treatment of its separated products and the final disposal of its residual waste generated. In this research, compound parabolic collectors are implemented for the use of solar energy radiation, UV-B type, in Solar Advanced Oxidation Processes in H2O2/O3/UVsolar homogeneous phase. Its application during the pre-treatment of four sulfur water wells from the region of Puebla, Mexico, demonstrated its ability to transform their sulfur compounds in sulfates of easy removal by a later stage of reverse osmosis, in an approximately 15 min treatment time process.
文摘Sulphur(S)is essential for the quality of oilseed crops,ranking as the fourth major nutrient after nitrogen(N),phosphorus(P),and potassium(K).While crops need sulphur in slightly lower amounts than phosphorus,maintaining optimum sulphur levels is crucial for oilseed yield and quality.Factors such as sulphur dynamics,impact of deficiency,application methods,and climate change must be addressed to improve agricultural practices.In South Asian countries like India,Pakistan,and Bangladesh,oilseeds are vital to the agricultural economy,supporting food security,livelihoods,and economic growth.However,climate change,marginal land cultivation,and a shift to more profitable crops like wheat and maize have led to a decline in oilseed productivity.Sulphur is particularly important for vital plant functions,including protein synthesis,chlorophyll formation,and resistance to abiotic stress.Proper management of sulphur can significantly enhance the yield,oil content,and seed quality.Sulphur fertilization improves crop resilience to pests,diseases,and environmental stresses,resulting in healthier plants.To optimize oilseed production,best practices for sulphur management like integrated nutrient management,regular soil testing,and the strategic application of sulphur-enriched fertilizers must be adopted.Despite its significance,many South Asian soils suffer from sulphur deficiency due to inadequate replenishment and reliance on high-analysis fertilizers.By enhancing sulphur availability,oilseed producers can significantly increase crop yields,improve oil content,and promote overall plant health,contributing to the agricultural economy and food security in the region.This manuscript aims to evaluate the critical role of sulphur in enhancing the yield,oil quality,and stress resilience of oilseed crops in South Asia.
基金supported by Science and Technology Project of Hebei Education Department (No. ZD2022128)Tangshan Science and Technology Plan Project (No. 22130226H)。
文摘In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studied,the collision behavior mode of particles was determined,the spatial saltation law of particles was investigated,the spatial functional axis of beds was determined,and the saltation separation period of particles was determined.The test results show that:When separation bed provides inlet airflow velocity(U_(in)) is 2.55 m/s,the airflow distribution interval of I,II and III areas were U_(I)=2.55-2.57 m/s,U_(II)=1.33-1.35 m/s,U_(III)=0.35-0.38 m/s,respectively;when separation bed vibration amplitude (A)A=2.4-2.5 mm,separation bed vibration frequency (f) f=23-24 Hz,the desulfurization effect is the best.When vibration intensity (Γ)Γ=1.22,U_(in)=1.05 m/s,the particles have disordered contact and collision behavior.WhenΓ=14.89,U_(in)=3.18 m/s,the particles have a transition cataclastic collision.WhenΓ=5.80,U_(in)=2.55 m/s,the particles have directional collision behavior.It is determined that the OX axis is the transverse stable diffusion axis of the material,the OY axis is the longitudinal gradient transport axis of the material,and the OZ axis is the vertical density cascade distribution axis of the material.When separation time (T) T=0-10 s was the period of disorderly diffusion and mixing of particles,T=10-20 s was the period of directional migration and stratification of particles,and T=20-30 s was the period of cascade distribution and separation of particles.Finally,separation experiments conducted under optimal operating parameters demonstrated that the clean coal yield was 72.02%with a sulfur content of 0.98%.
文摘The Boulon Djounga eastern perimeter is part of the Tiawa operating permit of the Société des Mines du Liptako (SML), located in the central southwestern part of Liptako (Niger). In this study, we used field data, Reverse Circulation (RC) surveys and chemical analyzes of gold to determine the characteristics of gold and its mineralization style. The eastern perimeter of Boulon Djounga is represented by a succession of metabasalts and metasediments both intersected by intrusions of quartz and dolerite dykes, and covered by sandstone and clayey rocks. Gold is present in low contents (0.00 - 0.30 ppm) in the sedimentary cover and in medium (0.30 - 1.00 ppm) or high contents (1.00 - 4.534 ppm) in the metasediments, and in the gray quartz veins and locally in the volcanics. It exists in a disseminated state or in a concentrated state in the surrounding areas in the form of discrete grains associated with sulphurous minerals (pyrite: FeS<sub>2</sub>, chalcopyrite: CuFeS<sub>2</sub> or arsenopyrite: FeAsS). The presence of gold in the quartz veins, and the NE-SW and NW-SE orientations of the ore bodies suggest that the eastern Boulon Djounga gold mineralization would be established during a late magmatic extensive phase.
基金supported by the National Natural Sci-ence Foundation of China(No.52002158)the Natural Science Foundation of Jiangxi Province(Nos.20204BCJL23039,20192ACBL21027)The authors would like to thank Prince Sultan University for computational support and Wenjuan Li from Shiyan-jia Lab(www.shiyanjia.com)for the XPS analysis.
文摘Driven by endless solar energy,photocatalytic H2 evolution from water splitting and CO_(2) conversion to hydrocarbon fuels over semiconductor photocatalysts are of great potential to simultaneously settle the greenhouse effect and energy shortage.Herein,Cr-doped zinc sulfide(ZnS)with accompanying sulphur vacancies(Vs)photocatalytic materials is developed by a facile hydrothermal method.The Cr dopants centralize photoinduced holes and Vs trap electrons,forming a synergistic effect for accelerating charge separation and transfer.The reaction energy barrier for both H2 evolution and CO_(2) reduction has been optimized.Therefore,in the absence of a cocatalyst,the optimal catalyst(Zn_(0.94) Cr_(0.06) S)achieves an out-standing H_(2) evolution activity of 20.3 mmol g^(-1) h^(-1),which is approximately 2.9 times higher than 6.9 mmol g^(-1) h^(-1) for pristine ZnS.In addition,in the gas-solid reaction system without co-catalysts or sacrificial agents,the Zn_(0.94) Cr_(0.06) S exhibits a considerable CO evolution rate of 19.56μmol g^(-1) h^(-1),about 10.1 times higher than ZnS(1.94μmol g^(-1) h^(-1)).Both the performances for H_(2) evolution and CO_(2) reduction of Zn_(0.94) Cr_(0.06) S outperform most of the previously reported photocatalysts.Particularly,the Zn_(0.94) Cr_(0.06) S possesses superior stability,the photoactivity of which exhibits no noticeable deactiva-tion after six cycles’reactions.This work may shed light on the rational design and fabrication of highly efficient materials via combining individual element doping and defect engineering.
基金Supported by National Natural Science Foundation (40573006)~~
文摘[Objective] The paper aimed to discuss the relationship between sulfur contents of mosses and the concentration of SO2-4 and the source of Atmospheric sulfur in Nanchang.[Method] 29 moss samples （Bryohaplocladium micriophyllum （Hedw.） R.Watanabe et Iwats） were collected from four sampling points,including North campus and Qianhu campus of Nanchang Power Station were determined.[Result] The results showed that sulfur contents of mosses tissues in North campus of Nanchang University （0.45±0.059%） were higher than Qianhu campus of Nanchang University （0.26±0.002%）,which coincided with the changing law of the concentration of SO2-4.Sulphur isotope of mosses tissues was-0.64‰-9.71‰.Sulphur isotope of mosses tissues in Meling （4.02‰-9.71‰） was higher than Qianhu campus of Nanchang University （0.55‰-0.56‰） and power plant （-0.64‰-0.45‰）.[Conclusion] Relationship between sulphur contents and sulphur isotopes of mosses tissues showed sulfur source of sulphur deposition in Nanchang city was mainly affected by 34S-enriched sulphur transported from northerly air masses and biogenic sulfur.
文摘In the research, available sulphur in 4 700 soil samples was tested and analyzed in 2006-2007 in Dengzhou, and the results showed that available sulphur was insufficient in farmlands in Dengzhou for cereal crop and about 60% farmlands with available sulphur belong to the farmlands with potential shortage of available sulphur for Cruciferae, Liliaceae and Leguminosae. Meanwhile, the producing causes were analyzed from the perspectives of fertilization structure and planting structure and the countermeasures were proposed in terms of sulphur movements in plants and characters.
基金supported by the National Department Public Benefit Research Foundation of China (No.201009001)the National Natural Science Foundation of China (No.41005065)the Basic Foundation for Public Benefit-Research Academies from the Central Government (No.2008KYYW01)
文摘New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles （10–10000 nm in diameter） obtained in the summer of 2008,at a suburban site in Beijing,China.We firstly reported the pollution level,particle number size distribution,diurnal variation of the particle number size distribution and then introduced the characteristics of the particle formation processes.The results showed that the number concentration of ultrafine particles was much lower than the values measured in other urban or suburban areas in previous studies.Sharp increases of ultrafine particle count were frequently observed at noon.An examination of the diurnal pattern suggested that the burst of ultrafine particles was mainly due to new particle formation promoted by photochemical processes.In addition,high relative humidity was a key factor driving the growth of the particles in the afternoon.During the 2-month observations,new particle formation from homogeneous nucleation was observed for 42.7% of the study period.The average growth rate of newly formed particles was 3.2 nm/hr,and varied from 1.2 to 8.0 nm/hr.The required concentration of condensable vapor was 4.4×10 7 cm-3,and its source rate was 1.2×10 6 cm-3 sec-1.Further calculation on the source rate of sulphuric acid vapor indicated that the average participation of sulphuric acid to particle growth rates was 28.7%.
文摘The recovery of nickel from laterite ore with sulphuric acid under the effect of microwave irradiation was studied.The experimental results indicated that the extraction rate of nickel was influenced by reaction time,sulphuric acid concentration,and temperature,especially by microwave power.The results obtained from the experiments of orthogonal arrays showed that the optimum conditions of sulphuric acid concentration,reaction time,microwave power,and temperature were 25 vol.%,1.5 h,600 W,and 90°C,respectively.Under the optimal conditions,the nickel recovery could reach approximately 90.8%,which was higher than that obtained by conventional water bath heating.Kinetic experiments showed that the leaching of nickel in a sulphuric acid medium was controlled by chemical reaction occurring on the surface of laterite ore.The apparent activation energy was 38.9 kJ/mol.Microwave heating technology is efficient,clean,and easy to control and facilitate continuous processing of materials.
基金the financial support from the Ministry of Education,Science and Technological Development of the Republic of Serbia (Projects No.34025 and No.172031)
文摘The aim of this work was to investigate the leaching of chalcopyrite concentrate in hydrochloric acid with hydrogen peroxide as a strong oxidizing agent. The effects of the leaching variables on metal extraction, such as stirring speed, solid-to-liquid ratio, temperature and HCl and H2O2 concentrations, were studied. The maximum final copper extraction of 33% was attained with 3.0 mol/L H2O2 in 0.5 mol/L HCl at room temperature after 180 min of the reaction. The results showed that the copper extraction was increased in the first 60 min of reaction, after which it essentially ceased due to the fast catalytic decomposition of hydrogen peroxide. Further, solid-to-liquid ratio affected the copper extraction significantly and the highest copper extraction was obtained in the most dilute suspension（i.e., S/L ratio of 1：100）. The dissolution process was described by the first order kinetics equation. The apparent activation energy of 19.6 k J/mol suggested that the dissolution process was under diffusion control. The reaction orders for HCl and H2O2 were established to be 0.30 and 0.53, respectively. The results of the XRD and SEM/EDS analysis of the leaching residue indicated the generation of the elemental sulphur on mineral surfaces which tended to inhibit the leaching rate.
文摘The process of lignite desulphurization via its treatment by an oxidant(air or air–steam mixture)has been studied.The research objective was useful determination of steam application in oxidative lignite desulphurization.It has been proved that the water steam should be included in the oxidant composition to increase the hydrogen sulphide and combustible constituent content in the gases obtained during the processes under research.The impact of factors which affect the reactions between solid(in our case–lignite)and gaseous reagent(oxidant,i.e.air and or air–steam mixture)upon the research process has been investigated,if these reactions occur in the kinetic area.Such factors are linear rate of oxidant movement and coal grain size.The values of oxidant movement linear rate and coal grain size,which the reaction transfer from pyrite sulphur and organic content of lignite from diffusion into kinetic area occurs by,have been determined.Under these‘‘transfer’’conditions,the values of coefficients of oxidant mass transfer(β,m/s)as well as Sherwood criteria and boiling layer differences have been calculated.
基金Project(51204210)supported by the National Natural Science Foundation of ChinaProject(2011AA061001)supported by the High-Tech Research and Development Program of ChinaProject(2012BAC12B04)supported by the National Science&Technology During the12th Five-Year Plan Period,China
文摘In order to enhance the lead and zinc recovery from the refractory Pb-Zn oxide ore, a new technology was developed based on sulfidation roasting with sulphur by temperature gradient method. The solid-liquid reaction system was established and the sulfidation thermodynamics of lead and zinc carbonate was calculated with the software HSC 5.0. The effects of roasting temperature,molar ratio of sulphur to lead and zinc carbonate and reaction time in the first step roasting, and holding temperature and time in the second roasting on the sulfidation extent were studied at a laboratory-scale. The experimental results show that the sulfidation extents of lead and zinc are 96.50% and 97.29% under the optimal conditions, respectively, and the artificial galena, sphalerite and wurtzite were formed. By the novel sulfidizing process, it is expected that the sulphides can be recovered by conventional flotation technology.
基金Supported by the National Natural Science Foundation of China （20376014） and Fujian Science and Technology Council Grant （HG99-01 ）.
文摘The catalytic effects of single and mixed catalysts, i.e. single 3%Ca and 5%Na-BL（black liquor） catalysts and mixed 3%Ca＋5%Na-BL catalyst, on carbon conversion, gasification reaction rate constant and activation energy, relative amount of harmful pollutant like sulphur containing gases have been investigated by thermogravimetry in steam gasification under temperature 750℃ to 950℃ at ambient pressure for three high-metarnorphous anthracites （Longyan, Fenghai and Youxia coals in Fujian Province）. The mixed catalyst of 3%Ca＋5%Na-BL increases greatly the carbon conversion and gasification rate constant by accelerating the gasification reaction C＋H2O→CO＋H2 due to presence of alkali surfacecompounds [COM], [CO2M] and exchanged calcium phenolate and calcium carboxylate （-COO）2. By adding CaCO3 into BL catalyst in gasification, in addition to improving the catalyst function and enhancing the carbon conversion, the effective desulphurization is also achieved, but the better operating temperature should be below 900℃. The homogenous and shrinking core models can be successfully employed to correlate the relations between the conversion and the gasification .time .and to estimate the reaction rate constant, The reaction acUvaUon energy and pre-exponential factor are estimated and the activation energy for mixed catalyst is in a range of 98.72-166.92 kJ·mol^-1, much less than 177.50-196.46 kJ·mol^-1 for non-catalytic steam gasification for three experimental coals.
基金supported by the National Natural Science Foundation of China (31272246)the National Key Technologies R&D Program of China during the 12th Five-Year Plan period (2013BAD07B00, 2011BAD16B07 and 2015BAD26B01)the Special Fund for Agroscientific Research in the Public Interest, China (201203096, 201203079 and 201203031)
文摘Water shortage has threatened sustainable development of agriculture globally as well as in the North China Plain（NCP）.Irrigation,as the most effective way to increase food production in dry land,may not be readily available in the situation of drought.One of the alternatives is to supply plants with enough nutrients so that they can be more sustainable to the water stress.The objective of this study was to explore effects of irrigation and sulphur（S）application on water consumption,dry matter accumulation（DMA）,and grain yield of winter wheat in NCP.Three irrigation regimes including no irrigation（rainfed,I0）during the whole growth period,once irrigation only at jointing stage（90 mm,I1）,and twice respective irrigation at jointing and anthesis stages（90 mm plus 90 mm,I2）,and two levels of S application including 0S0and 60 kg ha^–1（S60）were designed in the field experiment in NCP.Results showed that increasing irrigation times significantly increased mean grain yield of wheat by 12.5–23.7%and nitrogen partial factor productivity（NPFP）by 21.2–45.0%in two wheat seasons,but markedly decreased crop water use efficiency（YWUE）.Furthermore,S supply 60 kg ha^–1 significantly increased mean grain yield,YWUE,IWUE and NPFP by 5.6,6.1,23.2,and 5.6%（across two wheat seasons）,respectively.However,we also found that role of soil moisture prior to S application was one of important greater factors on improving the absorption and utilization of storage water and nutrients of soil.Thus,water supply is still the most important factor to restrict the growth of wheat in the present case of NCP,supplying 60 kg ha^–1 S with once irrigation 90 mm at the jointing stage is a relatively appropriate recommended combination to improve grain yield and WUE of wheat when saving water resources is be considered in irrigated wheat farmlands of NCP.
基金Funding from CSIR, New Delhi, under network project (ESC.205)
文摘Valuable metal extraction technology from thermal power plant fly ash is limited.In the present study,aluminium is extracted from fly ash as highly pure aluminium sulphate(>99.0%)by leaching with sulphuric acid,followed by pre-concentration and successive crystallization.Two types of fly ashes from different sources,i.e.,Talcher Thermal Power Station(TTPS)and Vedanta Aluminium Company Limited(VAL)were chosen for comparative study on the extraction of aluminium as aluminium sulphate.The product is characterized by powder X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR)and thermogravimetric analysis(TGA).Purity of aluminium sulphate was also investigated by inductively coupled plasma?optical emission spectrometry(ICP?OES).The extraction efficiency of aluminium depends on the varied solid-to-liquid ratio(fly ash:18mol/L H2SO4,g/mL)and particle size of fly ashes.Physico-chemical analysis indicates that the obtained product is Al2(SO4)3·18H2O,having low iron content(0.08%).
