A simple and convenient procedure for the synthesis of nitriles by dehydration of aldoxime using supported sulphuric acid on melamine-formaldehyde resin （MFR） under solvent-free condition has been developed. A varie...A simple and convenient procedure for the synthesis of nitriles by dehydration of aldoxime using supported sulphuric acid on melamine-formaldehyde resin （MFR） under solvent-free condition has been developed. A variety of aromatic and aliphatic aldoximes were converted to the corresponding nitriles. The resin was recovered and reused for subsequent reactions. ~ 2011 Ramin Rezaei. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Leaching mechanism of acid roasted ore in the spodumene sulphuric acid process was investigated. Experimental results of leaching rates along with variations of leaching temperature in the acidized and neutral leachin...Leaching mechanism of acid roasted ore in the spodumene sulphuric acid process was investigated. Experimental results of leaching rates along with variations of leaching temperature in the acidized and neutral leaching processes were reported. Applying ion exchange mechanism in acidized roasting and absorption entrainment mechanism at high temperature, leaching mechanism was discussed. A better explanation of experimental results was given.展开更多
The kinetics of dissolved O_2 reduction and hydrogen evolution reactions on copper surface was studied in naturally aerated and air and O_2-saturated 0.50 mol/L H_2SO_4 solutions using polarization measurements combin...The kinetics of dissolved O_2 reduction and hydrogen evolution reactions on copper surface was studied in naturally aerated and air and O_2-saturated 0.50 mol/L H_2SO_4 solutions using polarization measurements combined with the rotating disc electrode (RDE).The Koutecky-Levich plot indicated that the dissolved O_2 reduction at the copper electrode was an apparent four-electron process.A correlation between the presence of dissolved O_2 and the formation of Cu_2O,confirmed from XRD,was discussed. Ascorbic a...展开更多
Thick and dense oxide layers were obtained on aluminium in sulphuric acid electrolyte. For this purpose, the methodology of experimental design was used. A three-variables Doehlert design （bath temperature, anodic cu...Thick and dense oxide layers were obtained on aluminium in sulphuric acid electrolyte. For this purpose, the methodology of experimental design was used. A three-variables Doehlert design （bath temperature, anodic current density, sulphuric acid concentration）, was achieved. In order to maximize the growth rate and the density of the anodic oxide layer, optimum path study was conducted. Under the determined optimal anodizing conditions （5.7℃, 3 A.dm-2,Csul=140 g.L-1）, the estimated response values were 0.86 μmin-1 and 3.12 g.cm-2 for growth rate and density, respectively. The morphology of optimum layer was examined by scanning electron microscopy （SEM）. The compactness of the optimum anodic layer can be correlated with its morphology revealed by SEM observations.展开更多
In this study, the oxidation rates of sulfur dioxide （SO2） in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxid...In this study, the oxidation rates of sulfur dioxide （SO2） in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxidation-reduction potential of the acidic solution was enhanced, the transformation rate of sulfuric acid to sulphuric acid was increased and the absorption driving force was improved in the presence of ozone. By comparing the amount of sulfate ions measured in the experiments and the theoretical amount of sulfate ions calculated from the amount of ozone consumed in the reaction, it can be confirmed that oxygen free radicals from dissociation of ozone are reactive as an efficient oxidant and oxygen from ozone generator participates in the reaction with SO2. 0.602 mol of effective oxygen was introduced into the reaction by one mole of ozone in 10.15 rain at sulphuric acid concentration of 3% （by mass）, SO2 concentration of 1.33% （by volume） and oxygen flow rate of 1.5 L.min^-1 from ozone generator.展开更多
The effect of Sn on corrosion behavior of ferritic stainless steels in 20mass% H2SO4 was investigated by alternating current and direct current electrochemical methods and gravimetric tests at 25 ℃.The results show t...The effect of Sn on corrosion behavior of ferritic stainless steels in 20mass% H2SO4 was investigated by alternating current and direct current electrochemical methods and gravimetric tests at 25 ℃.The results show that Sn can effectively improve general corrosion resistance of ferritic stainless steels in H2SO4,mainly due to highly raised hydrogen evolution overpotential which is in favour of strong suppression of hydrogen evolution reaction,and inhibitive effect of dissolved Sn^2＋ on elementary anodic reactions.With increasing Sn content,the better corrosion resistance can be reached.The Electrochemical Impedance Spectroscopy（EIS）includes four time constants and can be perfectly fitted by equivalent circuit：Rs（CdlRct）（QadsRads（RL1（L1（RL2L2））））.展开更多
The bastnaesite used in hydrometallurgy usually contains 7%-11% fluorine,and the conversion of fluorine into high-value products is the key to achieving green production of rare earths and improving the comprehensive ...The bastnaesite used in hydrometallurgy usually contains 7%-11% fluorine,and the conversion of fluorine into high-value products is the key to achieving green production of rare earths and improving the comprehensive utilization of bastnaesite.In order to recover fluorine from bastnaesite in the form of KBF4,the mechanism of F^(-)conversion to BF^(4-)in sulphuric acid leaching solution of roasted bastnaesite was studied by using Eh-pH diagram and simulation experiment.It shows that the formation of BF^(4-)is affected by pH in the absence of rare earths.BF^(4-)is hydrolyzed to BF3 OH-and F-when the pH is greater than 3.9,and part of F-exists as HF^(2-)when pH is lower than 2.In the presence of La^(3+),the formation of BF^(4-)is mainly affected by LaF_(3) when pH is greater than 0,and in the case that the pH is lower than 2,it is mainly affected by HF^(2-).When Ce4+is present in solution,CeF_(2)^(2+) can exist stably in sulphuric acid solution.Bringing down the pH can reduce the stability of CeF_(2)^(2+) and increase the BF^(4-)conversion rate.Based on these results,KBF4 was prepared in the alkaline solution of bastnaesite,and the conversion of BF^(4-)is 84.31%.This provides a theoretical basis for the recovery of fluorine from bastnaesite in the form of KBF_(4).展开更多
Cs Rb V series low temperature sulphuric acid catalyst was prepared for the first time by using carbonized mother liquor containing alkali metal salts. The results show that the conversion of SO 2 on catalyst prepared...Cs Rb V series low temperature sulphuric acid catalyst was prepared for the first time by using carbonized mother liquor containing alkali metal salts. The results show that the conversion of SO 2 on catalyst prepared directly with carbonized mother liquor could reach to 24.8% at 410?℃. If n (Na)/ n (V) was adjusted properly, the conversion of SO 2 could be increased to 35.6% at 410?℃. Refined carbonized mother liquor could make the catalytic activity even higher at low temperature, the conversion of SO 2 could be increased to 36.65% at 410?℃. The catalyst was examined with differential thermal analysis. It was found that both endothermic peaks and exothermic peaks of catalyst shifted forward obviously and the catalyst possessed higher activity at low temperature.展开更多
To avoid potential human casualties and environmental pollution,flowout gas from sulphuric gas wells showing high concentrations of volatile gas must be neutralized by controlled ignition.Simulation model is built by ...To avoid potential human casualties and environmental pollution,flowout gas from sulphuric gas wells showing high concentrations of volatile gas must be neutralized by controlled ignition.Simulation model is built by using CFD software for flowout gas,and ignition methods are analyzed.The simulation results indicate that the optimal ignition zone is located between 150mm and 570mm above the gas flowout device.Two ignition methods,electronical and chemical,are developed.12 and 6 experimental tests are performed respectively for these two methods.Results from the above tests verify that both approaches are successful in igniting the gas promptly and safely.In addition,our experience proves that the former way is more suitable for the fixed position ignition case,while the latter is more suitable for the long-distance or emergent ignition case.These two approaches can potentially be applied to a wide range of situations other than the fixed position ignition case and long distance ignition case.展开更多
Inhibition of aluminium corrosion using C. papaya leaves extract in 1.0 M H2SO4 was investigated by using gravimetric analysis at various concentrations and temperatures: 303 K, 313 K and 323 K. Characterization was d...Inhibition of aluminium corrosion using C. papaya leaves extract in 1.0 M H2SO4 was investigated by using gravimetric analysis at various concentrations and temperatures: 303 K, 313 K and 323 K. Characterization was done by using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FT-IR) spectroscopy. Results show that, inhibiting ability of the extract was due to its adsorption onto the metal surface through Langmuir adsorption isotherm. Thermodynamic (Gibbs energy, entropy and heats of adsorption) and kinetic parameters (activation energy and entropy of activation) were also determined. All of these agreed to physical adsorption of inhibitor onto the aluminium surface.展开更多
The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and al...The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.展开更多
A sulphuric acid bake–leach method for the treatment of mixed copper-cobalt oxide minerals was investigated as an alternative to the reductive leaching method. Sulphuric acid bake-leach process of the mixed copper-co...A sulphuric acid bake–leach method for the treatment of mixed copper-cobalt oxide minerals was investigated as an alternative to the reductive leaching method. Sulphuric acid bake-leach process of the mixed copper-cobalt oxide ore was carried out by mixing the sample with sulphuric acid followed by baking of the mixture in a muffle furnace. Baking tests were conducted at different conditions such as temperature, time, and varying amounts of acid. The reacted samples were then subjected to water leaching at room temperature to determine the leachability of copper and cobalt from the baked material. The dissolutions of copper and cobalt were dependent on acid concentration with cobalt showing more sensitivity to the amount of acid. Both copper and cobalt were extracted from the baked material within short leaching times and without the addition of reducing agents. The outcome of this work has shown that the sulphuric acid bake-leach process is a possible alternative to the reductive leaching method for copper-cobalt oxide ores.展开更多
Sulphur(S)is essential for the quality of oilseed crops,ranking as the fourth major nutrient after nitrogen(N),phosphorus(P),and potassium(K).While crops need sulphur in slightly lower amounts than phosphorus,maintain...Sulphur(S)is essential for the quality of oilseed crops,ranking as the fourth major nutrient after nitrogen(N),phosphorus(P),and potassium(K).While crops need sulphur in slightly lower amounts than phosphorus,maintaining optimum sulphur levels is crucial for oilseed yield and quality.Factors such as sulphur dynamics,impact of deficiency,application methods,and climate change must be addressed to improve agricultural practices.In South Asian countries like India,Pakistan,and Bangladesh,oilseeds are vital to the agricultural economy,supporting food security,livelihoods,and economic growth.However,climate change,marginal land cultivation,and a shift to more profitable crops like wheat and maize have led to a decline in oilseed productivity.Sulphur is particularly important for vital plant functions,including protein synthesis,chlorophyll formation,and resistance to abiotic stress.Proper management of sulphur can significantly enhance the yield,oil content,and seed quality.Sulphur fertilization improves crop resilience to pests,diseases,and environmental stresses,resulting in healthier plants.To optimize oilseed production,best practices for sulphur management like integrated nutrient management,regular soil testing,and the strategic application of sulphur-enriched fertilizers must be adopted.Despite its significance,many South Asian soils suffer from sulphur deficiency due to inadequate replenishment and reliance on high-analysis fertilizers.By enhancing sulphur availability,oilseed producers can significantly increase crop yields,improve oil content,and promote overall plant health,contributing to the agricultural economy and food security in the region.This manuscript aims to evaluate the critical role of sulphur in enhancing the yield,oil quality,and stress resilience of oilseed crops in South Asia.展开更多
Developing bifunctional electrocatalysts with enhanced efficiency for both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)remains a significant challenge.Herein,we constructed S-doped ultra-fine RuO...Developing bifunctional electrocatalysts with enhanced efficiency for both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)remains a significant challenge.Herein,we constructed S-doped ultra-fine RuO_(2) nanodots that were uniformly dispersed on carbon nanotubes.The incorporation of S effectively induces local rearrangement of the electronic structure of RuO_(2),thereby enhancing the dispersion of RuO_(2) as active sites and optimizing the adsorption free energy of H^(∗)intermediate.As ex-pected,the as-synthesized S-RuO_(2)/CNT delivers remarkable HER activity in all pH electrolytes,achieving lower overpotentials of 136,159,and 396 mV at 100 mA cm^(-2) in acidic,neutral,and basic solutions,respectively.Moreover,a unitary S-RuO_(2)/CNT electrolytic cell requires only a lower voltage(1.476 V)to achieve a current density of 10 mA cm^(-2) in 1.0 mol/L KOH.This ingenious work represents a significant breakthrough in the rational design of bifunctional electrocatalysts,enabling remarkable performance in electrochemical water electrolysis.展开更多
In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studi...In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studied,the collision behavior mode of particles was determined,the spatial saltation law of particles was investigated,the spatial functional axis of beds was determined,and the saltation separation period of particles was determined.The test results show that:When separation bed provides inlet airflow velocity(U_(in)) is 2.55 m/s,the airflow distribution interval of I,II and III areas were U_(I)=2.55-2.57 m/s,U_(II)=1.33-1.35 m/s,U_(III)=0.35-0.38 m/s,respectively;when separation bed vibration amplitude (A)A=2.4-2.5 mm,separation bed vibration frequency (f) f=23-24 Hz,the desulfurization effect is the best.When vibration intensity (Γ)Γ=1.22,U_(in)=1.05 m/s,the particles have disordered contact and collision behavior.WhenΓ=14.89,U_(in)=3.18 m/s,the particles have a transition cataclastic collision.WhenΓ=5.80,U_(in)=2.55 m/s,the particles have directional collision behavior.It is determined that the OX axis is the transverse stable diffusion axis of the material,the OY axis is the longitudinal gradient transport axis of the material,and the OZ axis is the vertical density cascade distribution axis of the material.When separation time (T) T=0-10 s was the period of disorderly diffusion and mixing of particles,T=10-20 s was the period of directional migration and stratification of particles,and T=20-30 s was the period of cascade distribution and separation of particles.Finally,separation experiments conducted under optimal operating parameters demonstrated that the clean coal yield was 72.02%with a sulfur content of 0.98%.展开更多
[Objective] The paper aimed to discuss the relationship between sulfur contents of mosses and the concentration of SO2-4 and the source of Atmospheric sulfur in Nanchang.[Method] 29 moss samples （Bryohaplocladium mic...[Objective] The paper aimed to discuss the relationship between sulfur contents of mosses and the concentration of SO2-4 and the source of Atmospheric sulfur in Nanchang.[Method] 29 moss samples （Bryohaplocladium micriophyllum （Hedw.） R.Watanabe et Iwats） were collected from four sampling points,including North campus and Qianhu campus of Nanchang Power Station were determined.[Result] The results showed that sulfur contents of mosses tissues in North campus of Nanchang University （0.45±0.059%） were higher than Qianhu campus of Nanchang University （0.26±0.002%）,which coincided with the changing law of the concentration of SO2-4.Sulphur isotope of mosses tissues was-0.64‰-9.71‰.Sulphur isotope of mosses tissues in Meling （4.02‰-9.71‰） was higher than Qianhu campus of Nanchang University （0.55‰-0.56‰） and power plant （-0.64‰-0.45‰）.[Conclusion] Relationship between sulphur contents and sulphur isotopes of mosses tissues showed sulfur source of sulphur deposition in Nanchang city was mainly affected by 34S-enriched sulphur transported from northerly air masses and biogenic sulfur.展开更多
New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles （10–10000 nm in dia...New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles （10–10000 nm in diameter） obtained in the summer of 2008,at a suburban site in Beijing,China.We firstly reported the pollution level,particle number size distribution,diurnal variation of the particle number size distribution and then introduced the characteristics of the particle formation processes.The results showed that the number concentration of ultrafine particles was much lower than the values measured in other urban or suburban areas in previous studies.Sharp increases of ultrafine particle count were frequently observed at noon.An examination of the diurnal pattern suggested that the burst of ultrafine particles was mainly due to new particle formation promoted by photochemical processes.In addition,high relative humidity was a key factor driving the growth of the particles in the afternoon.During the 2-month observations,new particle formation from homogeneous nucleation was observed for 42.7% of the study period.The average growth rate of newly formed particles was 3.2 nm/hr,and varied from 1.2 to 8.0 nm/hr.The required concentration of condensable vapor was 4.4×10 7 cm-3,and its source rate was 1.2×10 6 cm-3 sec-1.Further calculation on the source rate of sulphuric acid vapor indicated that the average participation of sulphuric acid to particle growth rates was 28.7%.展开更多
The recovery of nickel from laterite ore with sulphuric acid under the effect of microwave irradiation was studied.The experimental results indicated that the extraction rate of nickel was influenced by reaction time,...The recovery of nickel from laterite ore with sulphuric acid under the effect of microwave irradiation was studied.The experimental results indicated that the extraction rate of nickel was influenced by reaction time,sulphuric acid concentration,and temperature,especially by microwave power.The results obtained from the experiments of orthogonal arrays showed that the optimum conditions of sulphuric acid concentration,reaction time,microwave power,and temperature were 25 vol.%,1.5 h,600 W,and 90°C,respectively.Under the optimal conditions,the nickel recovery could reach approximately 90.8%,which was higher than that obtained by conventional water bath heating.Kinetic experiments showed that the leaching of nickel in a sulphuric acid medium was controlled by chemical reaction occurring on the surface of laterite ore.The apparent activation energy was 38.9 kJ/mol.Microwave heating technology is efficient,clean,and easy to control and facilitate continuous processing of materials.展开更多
Valuable metal extraction technology from thermal power plant fly ash is limited.In the present study,aluminium is extracted from fly ash as highly pure aluminium sulphate(>99.0%)by leaching with sulphuric acid,fol...Valuable metal extraction technology from thermal power plant fly ash is limited.In the present study,aluminium is extracted from fly ash as highly pure aluminium sulphate(>99.0%)by leaching with sulphuric acid,followed by pre-concentration and successive crystallization.Two types of fly ashes from different sources,i.e.,Talcher Thermal Power Station(TTPS)and Vedanta Aluminium Company Limited(VAL)were chosen for comparative study on the extraction of aluminium as aluminium sulphate.The product is characterized by powder X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR)and thermogravimetric analysis(TGA).Purity of aluminium sulphate was also investigated by inductively coupled plasma?optical emission spectrometry(ICP?OES).The extraction efficiency of aluminium depends on the varied solid-to-liquid ratio(fly ash:18mol/L H2SO4,g/mL)and particle size of fly ashes.Physico-chemical analysis indicates that the obtained product is Al2(SO4)3·18H2O,having low iron content(0.08%).展开更多
文摘A simple and convenient procedure for the synthesis of nitriles by dehydration of aldoxime using supported sulphuric acid on melamine-formaldehyde resin （MFR） under solvent-free condition has been developed. A variety of aromatic and aliphatic aldoximes were converted to the corresponding nitriles. The resin was recovered and reused for subsequent reactions. ~ 2011 Ramin Rezaei. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
文摘Leaching mechanism of acid roasted ore in the spodumene sulphuric acid process was investigated. Experimental results of leaching rates along with variations of leaching temperature in the acidized and neutral leaching processes were reported. Applying ion exchange mechanism in acidized roasting and absorption entrainment mechanism at high temperature, leaching mechanism was discussed. A better explanation of experimental results was given.
文摘The kinetics of dissolved O_2 reduction and hydrogen evolution reactions on copper surface was studied in naturally aerated and air and O_2-saturated 0.50 mol/L H_2SO_4 solutions using polarization measurements combined with the rotating disc electrode (RDE).The Koutecky-Levich plot indicated that the dissolved O_2 reduction at the copper electrode was an apparent four-electron process.A correlation between the presence of dissolved O_2 and the formation of Cu_2O,confirmed from XRD,was discussed. Ascorbic a...
文摘Thick and dense oxide layers were obtained on aluminium in sulphuric acid electrolyte. For this purpose, the methodology of experimental design was used. A three-variables Doehlert design （bath temperature, anodic current density, sulphuric acid concentration）, was achieved. In order to maximize the growth rate and the density of the anodic oxide layer, optimum path study was conducted. Under the determined optimal anodizing conditions （5.7℃, 3 A.dm-2,Csul=140 g.L-1）, the estimated response values were 0.86 μmin-1 and 3.12 g.cm-2 for growth rate and density, respectively. The morphology of optimum layer was examined by scanning electron microscopy （SEM）. The compactness of the optimum anodic layer can be correlated with its morphology revealed by SEM observations.
文摘In this study, the oxidation rates of sulfur dioxide （SO2） in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxidation-reduction potential of the acidic solution was enhanced, the transformation rate of sulfuric acid to sulphuric acid was increased and the absorption driving force was improved in the presence of ozone. By comparing the amount of sulfate ions measured in the experiments and the theoretical amount of sulfate ions calculated from the amount of ozone consumed in the reaction, it can be confirmed that oxygen free radicals from dissociation of ozone are reactive as an efficient oxidant and oxygen from ozone generator participates in the reaction with SO2. 0.602 mol of effective oxygen was introduced into the reaction by one mole of ozone in 10.15 rain at sulphuric acid concentration of 3% （by mass）, SO2 concentration of 1.33% （by volume） and oxygen flow rate of 1.5 L.min^-1 from ozone generator.
基金Item Sponsored by National Science-technology Support Plan Project of China(2012BAE04B02)National Natural Science Foundation of China(51271050)+1 种基金China Postdoctoral Science Foundation(2015M581346)Foundamental Research Funds for the Central Universities of China(N150203002)
文摘The effect of Sn on corrosion behavior of ferritic stainless steels in 20mass% H2SO4 was investigated by alternating current and direct current electrochemical methods and gravimetric tests at 25 ℃.The results show that Sn can effectively improve general corrosion resistance of ferritic stainless steels in H2SO4,mainly due to highly raised hydrogen evolution overpotential which is in favour of strong suppression of hydrogen evolution reaction,and inhibitive effect of dissolved Sn^2＋ on elementary anodic reactions.With increasing Sn content,the better corrosion resistance can be reached.The Electrochemical Impedance Spectroscopy（EIS）includes four time constants and can be perfectly fitted by equivalent circuit：Rs（CdlRct）（QadsRads（RL1（L1（RL2L2））））.
基金the National Natural Science Foundation of China(51176122,41641010)the Science and Technology Support Project of Sichuan Province(2016SZ0071,20GJHZ0042)。
文摘The bastnaesite used in hydrometallurgy usually contains 7%-11% fluorine,and the conversion of fluorine into high-value products is the key to achieving green production of rare earths and improving the comprehensive utilization of bastnaesite.In order to recover fluorine from bastnaesite in the form of KBF4,the mechanism of F^(-)conversion to BF^(4-)in sulphuric acid leaching solution of roasted bastnaesite was studied by using Eh-pH diagram and simulation experiment.It shows that the formation of BF^(4-)is affected by pH in the absence of rare earths.BF^(4-)is hydrolyzed to BF3 OH-and F-when the pH is greater than 3.9,and part of F-exists as HF^(2-)when pH is lower than 2.In the presence of La^(3+),the formation of BF^(4-)is mainly affected by LaF_(3) when pH is greater than 0,and in the case that the pH is lower than 2,it is mainly affected by HF^(2-).When Ce4+is present in solution,CeF_(2)^(2+) can exist stably in sulphuric acid solution.Bringing down the pH can reduce the stability of CeF_(2)^(2+) and increase the BF^(4-)conversion rate.Based on these results,KBF4 was prepared in the alkaline solution of bastnaesite,and the conversion of BF^(4-)is 84.31%.This provides a theoretical basis for the recovery of fluorine from bastnaesite in the form of KBF_(4).
文摘Cs Rb V series low temperature sulphuric acid catalyst was prepared for the first time by using carbonized mother liquor containing alkali metal salts. The results show that the conversion of SO 2 on catalyst prepared directly with carbonized mother liquor could reach to 24.8% at 410?℃. If n (Na)/ n (V) was adjusted properly, the conversion of SO 2 could be increased to 35.6% at 410?℃. Refined carbonized mother liquor could make the catalytic activity even higher at low temperature, the conversion of SO 2 could be increased to 36.65% at 410?℃. The catalyst was examined with differential thermal analysis. It was found that both endothermic peaks and exothermic peaks of catalyst shifted forward obviously and the catalyst possessed higher activity at low temperature.
文摘To avoid potential human casualties and environmental pollution,flowout gas from sulphuric gas wells showing high concentrations of volatile gas must be neutralized by controlled ignition.Simulation model is built by using CFD software for flowout gas,and ignition methods are analyzed.The simulation results indicate that the optimal ignition zone is located between 150mm and 570mm above the gas flowout device.Two ignition methods,electronical and chemical,are developed.12 and 6 experimental tests are performed respectively for these two methods.Results from the above tests verify that both approaches are successful in igniting the gas promptly and safely.In addition,our experience proves that the former way is more suitable for the fixed position ignition case,while the latter is more suitable for the long-distance or emergent ignition case.These two approaches can potentially be applied to a wide range of situations other than the fixed position ignition case and long distance ignition case.
文摘Inhibition of aluminium corrosion using C. papaya leaves extract in 1.0 M H2SO4 was investigated by using gravimetric analysis at various concentrations and temperatures: 303 K, 313 K and 323 K. Characterization was done by using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FT-IR) spectroscopy. Results show that, inhibiting ability of the extract was due to its adsorption onto the metal surface through Langmuir adsorption isotherm. Thermodynamic (Gibbs energy, entropy and heats of adsorption) and kinetic parameters (activation energy and entropy of activation) were also determined. All of these agreed to physical adsorption of inhibitor onto the aluminium surface.
文摘The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.
文摘A sulphuric acid bake–leach method for the treatment of mixed copper-cobalt oxide minerals was investigated as an alternative to the reductive leaching method. Sulphuric acid bake-leach process of the mixed copper-cobalt oxide ore was carried out by mixing the sample with sulphuric acid followed by baking of the mixture in a muffle furnace. Baking tests were conducted at different conditions such as temperature, time, and varying amounts of acid. The reacted samples were then subjected to water leaching at room temperature to determine the leachability of copper and cobalt from the baked material. The dissolutions of copper and cobalt were dependent on acid concentration with cobalt showing more sensitivity to the amount of acid. Both copper and cobalt were extracted from the baked material within short leaching times and without the addition of reducing agents. The outcome of this work has shown that the sulphuric acid bake-leach process is a possible alternative to the reductive leaching method for copper-cobalt oxide ores.
文摘Sulphur(S)is essential for the quality of oilseed crops,ranking as the fourth major nutrient after nitrogen(N),phosphorus(P),and potassium(K).While crops need sulphur in slightly lower amounts than phosphorus,maintaining optimum sulphur levels is crucial for oilseed yield and quality.Factors such as sulphur dynamics,impact of deficiency,application methods,and climate change must be addressed to improve agricultural practices.In South Asian countries like India,Pakistan,and Bangladesh,oilseeds are vital to the agricultural economy,supporting food security,livelihoods,and economic growth.However,climate change,marginal land cultivation,and a shift to more profitable crops like wheat and maize have led to a decline in oilseed productivity.Sulphur is particularly important for vital plant functions,including protein synthesis,chlorophyll formation,and resistance to abiotic stress.Proper management of sulphur can significantly enhance the yield,oil content,and seed quality.Sulphur fertilization improves crop resilience to pests,diseases,and environmental stresses,resulting in healthier plants.To optimize oilseed production,best practices for sulphur management like integrated nutrient management,regular soil testing,and the strategic application of sulphur-enriched fertilizers must be adopted.Despite its significance,many South Asian soils suffer from sulphur deficiency due to inadequate replenishment and reliance on high-analysis fertilizers.By enhancing sulphur availability,oilseed producers can significantly increase crop yields,improve oil content,and promote overall plant health,contributing to the agricultural economy and food security in the region.This manuscript aims to evaluate the critical role of sulphur in enhancing the yield,oil quality,and stress resilience of oilseed crops in South Asia.
基金financially supported by the Joint Fund of Science and Technology R&D Plan of Henan Province(No.232301420003)。
文摘Developing bifunctional electrocatalysts with enhanced efficiency for both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)remains a significant challenge.Herein,we constructed S-doped ultra-fine RuO_(2) nanodots that were uniformly dispersed on carbon nanotubes.The incorporation of S effectively induces local rearrangement of the electronic structure of RuO_(2),thereby enhancing the dispersion of RuO_(2) as active sites and optimizing the adsorption free energy of H^(∗)intermediate.As ex-pected,the as-synthesized S-RuO_(2)/CNT delivers remarkable HER activity in all pH electrolytes,achieving lower overpotentials of 136,159,and 396 mV at 100 mA cm^(-2) in acidic,neutral,and basic solutions,respectively.Moreover,a unitary S-RuO_(2)/CNT electrolytic cell requires only a lower voltage(1.476 V)to achieve a current density of 10 mA cm^(-2) in 1.0 mol/L KOH.This ingenious work represents a significant breakthrough in the rational design of bifunctional electrocatalysts,enabling remarkable performance in electrochemical water electrolysis.
基金supported by Science and Technology Project of Hebei Education Department (No. ZD2022128)Tangshan Science and Technology Plan Project (No. 22130226H)。
文摘In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studied,the collision behavior mode of particles was determined,the spatial saltation law of particles was investigated,the spatial functional axis of beds was determined,and the saltation separation period of particles was determined.The test results show that:When separation bed provides inlet airflow velocity(U_(in)) is 2.55 m/s,the airflow distribution interval of I,II and III areas were U_(I)=2.55-2.57 m/s,U_(II)=1.33-1.35 m/s,U_(III)=0.35-0.38 m/s,respectively;when separation bed vibration amplitude (A)A=2.4-2.5 mm,separation bed vibration frequency (f) f=23-24 Hz,the desulfurization effect is the best.When vibration intensity (Γ)Γ=1.22,U_(in)=1.05 m/s,the particles have disordered contact and collision behavior.WhenΓ=14.89,U_(in)=3.18 m/s,the particles have a transition cataclastic collision.WhenΓ=5.80,U_(in)=2.55 m/s,the particles have directional collision behavior.It is determined that the OX axis is the transverse stable diffusion axis of the material,the OY axis is the longitudinal gradient transport axis of the material,and the OZ axis is the vertical density cascade distribution axis of the material.When separation time (T) T=0-10 s was the period of disorderly diffusion and mixing of particles,T=10-20 s was the period of directional migration and stratification of particles,and T=20-30 s was the period of cascade distribution and separation of particles.Finally,separation experiments conducted under optimal operating parameters demonstrated that the clean coal yield was 72.02%with a sulfur content of 0.98%.
基金Supported by National Natural Science Foundation (40573006)~~
文摘[Objective] The paper aimed to discuss the relationship between sulfur contents of mosses and the concentration of SO2-4 and the source of Atmospheric sulfur in Nanchang.[Method] 29 moss samples （Bryohaplocladium micriophyllum （Hedw.） R.Watanabe et Iwats） were collected from four sampling points,including North campus and Qianhu campus of Nanchang Power Station were determined.[Result] The results showed that sulfur contents of mosses tissues in North campus of Nanchang University （0.45±0.059%） were higher than Qianhu campus of Nanchang University （0.26±0.002%）,which coincided with the changing law of the concentration of SO2-4.Sulphur isotope of mosses tissues was-0.64‰-9.71‰.Sulphur isotope of mosses tissues in Meling （4.02‰-9.71‰） was higher than Qianhu campus of Nanchang University （0.55‰-0.56‰） and power plant （-0.64‰-0.45‰）.[Conclusion] Relationship between sulphur contents and sulphur isotopes of mosses tissues showed sulfur source of sulphur deposition in Nanchang city was mainly affected by 34S-enriched sulphur transported from northerly air masses and biogenic sulfur.
基金supported by the National Department Public Benefit Research Foundation of China (No.201009001)the National Natural Science Foundation of China (No.41005065)the Basic Foundation for Public Benefit-Research Academies from the Central Government (No.2008KYYW01)
文摘New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles （10–10000 nm in diameter） obtained in the summer of 2008,at a suburban site in Beijing,China.We firstly reported the pollution level,particle number size distribution,diurnal variation of the particle number size distribution and then introduced the characteristics of the particle formation processes.The results showed that the number concentration of ultrafine particles was much lower than the values measured in other urban or suburban areas in previous studies.Sharp increases of ultrafine particle count were frequently observed at noon.An examination of the diurnal pattern suggested that the burst of ultrafine particles was mainly due to new particle formation promoted by photochemical processes.In addition,high relative humidity was a key factor driving the growth of the particles in the afternoon.During the 2-month observations,new particle formation from homogeneous nucleation was observed for 42.7% of the study period.The average growth rate of newly formed particles was 3.2 nm/hr,and varied from 1.2 to 8.0 nm/hr.The required concentration of condensable vapor was 4.4×10 7 cm-3,and its source rate was 1.2×10 6 cm-3 sec-1.Further calculation on the source rate of sulphuric acid vapor indicated that the average participation of sulphuric acid to particle growth rates was 28.7%.
文摘The recovery of nickel from laterite ore with sulphuric acid under the effect of microwave irradiation was studied.The experimental results indicated that the extraction rate of nickel was influenced by reaction time,sulphuric acid concentration,and temperature,especially by microwave power.The results obtained from the experiments of orthogonal arrays showed that the optimum conditions of sulphuric acid concentration,reaction time,microwave power,and temperature were 25 vol.%,1.5 h,600 W,and 90°C,respectively.Under the optimal conditions,the nickel recovery could reach approximately 90.8%,which was higher than that obtained by conventional water bath heating.Kinetic experiments showed that the leaching of nickel in a sulphuric acid medium was controlled by chemical reaction occurring on the surface of laterite ore.The apparent activation energy was 38.9 kJ/mol.Microwave heating technology is efficient,clean,and easy to control and facilitate continuous processing of materials.
基金Funding from CSIR, New Delhi, under network project (ESC.205)
文摘Valuable metal extraction technology from thermal power plant fly ash is limited.In the present study,aluminium is extracted from fly ash as highly pure aluminium sulphate(>99.0%)by leaching with sulphuric acid,followed by pre-concentration and successive crystallization.Two types of fly ashes from different sources,i.e.,Talcher Thermal Power Station(TTPS)and Vedanta Aluminium Company Limited(VAL)were chosen for comparative study on the extraction of aluminium as aluminium sulphate.The product is characterized by powder X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR)and thermogravimetric analysis(TGA).Purity of aluminium sulphate was also investigated by inductively coupled plasma?optical emission spectrometry(ICP?OES).The extraction efficiency of aluminium depends on the varied solid-to-liquid ratio(fly ash:18mol/L H2SO4,g/mL)and particle size of fly ashes.Physico-chemical analysis indicates that the obtained product is Al2(SO4)3·18H2O,having low iron content(0.08%).
