The influence of Co Mo P/medical stone and SO_4^(2-)/medical stone on sulfur behavior during the Longma coal pyrolysis was investigated in a fixed bed reactor. Moreover, the kinetics was also studied. It is found that...The influence of Co Mo P/medical stone and SO_4^(2-)/medical stone on sulfur behavior during the Longma coal pyrolysis was investigated in a fixed bed reactor. Moreover, the kinetics was also studied. It is found that adding SO_4^(2-)/medical stone was favorable to removal of volatile matter, while adding Co Mo P/medical stone could inhibit the emission of volatiles. Moreover, the results also showed that adding Co Mo P/medical stone made the total sulfur retention higher, while adding SO_4^(2-)/medical stone made the total sulfur retention lower. Adding modified medical stone was beneficial to removal of sulfate sulfur and pyritic sulfur, while it was beneficial to retaining organic sulfur in the residue. Furthermore, adding Co Mo P/medical stone and SO_4^(2-)/medical stone all could increase the emission of H_2S when the temperature was higher than 450℃. Judging from the kinetics study, it also can be known that addition of the natural minerals could result in a decrease of the pre-exponential factor and also change the apparent activation energy upon comparing the apparent activation energy and the pre-exponential factor of raw Longma coal at 435—537℃.展开更多
Sheytoor Iron Ore deposit is located in Yazd province of Iran (Bafq). The most abundant ore is magnetite, which can be seen in the form of mass and granular tissue in various forms of self-shaped, semi-self-shaped and...Sheytoor Iron Ore deposit is located in Yazd province of Iran (Bafq). The most abundant ore is magnetite, which can be seen in the form of mass and granular tissue in various forms of self-shaped, semi-self-shaped and amorphous. The main purpose of this study is to identify the geochemical relationship of phosphorus and sulfur elements and also three-dimensional modeling of mineralization of these elements in iron ore. In order to achieve the research goal, methods such as k-mean clustering technique, concentration-volume fractal as well as block modeling with kriging estimator and Inverse Distance Weighting (IDW) interpolator were used. The model of geochemical behavior of phosphorus and sulfur elements compared to iron is of great importance because these two elements are known as deleterious elements in mineral processing and steelmaking processes, which are the post-mining stages. Existence of geochemical model and identification of elements’ behavior towards each other play a key role in optimizing mining operations in order to achieve geometallurgical goals. The results of this study are the three-dimensional model of mineralization of iron, phosphorus and sulfur elements, separation of phosphorus and sulfur mineralization communities and also presenting the model of enrichment community of these two elements. All the results are in line with geometallurgical studies and can optimize the next steps by optimizing the mining process.展开更多
The interfacial behavior of sulfur and yttrium in the yttrium modified Ni 3Al based alloy IC6 during oxidation at 1100 ℃ was analyzed by X ray line scan of electron probe microstructural analysis(EPMA). The resul...The interfacial behavior of sulfur and yttrium in the yttrium modified Ni 3Al based alloy IC6 during oxidation at 1100 ℃ was analyzed by X ray line scan of electron probe microstructural analysis(EPMA). The results show that the migration and segregation of sulfur to the interface between oxide scale and the substrate at high temperature is retarded owing to the presence of yttrium. This is attributed to the desulfurization by yttrium in the melt and the trapping of sulfur by yttrium rich phases during oxidation, which leads to improving the coherence between oxide scale and substrate. Another reason of increasing the high temperature oxidation resistance of alloy IC6 by the addition of yttrium is that yttrium migrates to the grain boundaries of oxides during oxidation and hence improve their strength. This results in the transformation of the oxide scale spallation cracks from intergranular cracks for alloy without yttrium to transgranular ones for yttrium modified alloy.展开更多
The corrosion behaviors and mechanism of Ni-14%Cr alloys in molten salt with Na2SO4 at 1000℃ was investigated by means of XRD analysis and SEM observation. Results show that the alloys were subjected to the accelerat...The corrosion behaviors and mechanism of Ni-14%Cr alloys in molten salt with Na2SO4 at 1000℃ was investigated by means of XRD analysis and SEM observation. Results show that the alloys were subjected to the accelerated corrosion in molten salt and the corrosion kinetic of the alloy obeys the parabolic law. On the other hand, the corrosion-resistance of the alloy could be improved significantly by increasing of chromium content. Corrosion products may be divided into three layers, i. e. NiCr2O4, CoCr2O4, CoNi2S4, AlWO3 and Al2O3 granule are included in the outside of the scales, the continuous Al2O3 layer is localed in intermediate layer, and the sulfides is in the internal layer. The Cr2S3 phase in Ni-14Cr prevents the S and O from the matrix of the alloy. The morphology examinations tend to support the sulphidization-basic dissolution model previously proposed for hot corrosion mechanism.展开更多
Desulfurization performance with low binary basicity refining slag in 72 grade tire cord steel was calculated using FactSage and it is found that sulfur content in steel decreases with the increase of basicity of slag...Desulfurization performance with low binary basicity refining slag in 72 grade tire cord steel was calculated using FactSage and it is found that sulfur content in steel decreases with the increase of basicity of slag, MgO content in slag and slag/steel ratio while sulfur partition ratio between slag and steel increases gradually with the increase of basicity of slag as well as MgO content. Experiments were carried out and the results are of great agreements with theoretical calculation. Then industrial application tests were performed in a domestic plant and good results were achieved. Sulfur content in steel decreases gradually during refining process, as a result, sulfur content in the billets is controlled in the range of 0.007 1%-0.008 1%. Sulfur content in steel refined with slag basicity of 1.21 is lower than that of 1.02, while the plasticity of oxide compound inclusions is a little better controlled in low basicity heats. Using refining slag with basicity of 1.0-1.2 and MgO content of 5%-10% and reducing the slag takeover of LD are favorable for improving the desulfurization performance and the plasticity of inclusions during the industrial production.展开更多
The crystallization behavior of desulfurization product is directly related to its high-temperature-resistant ability.Effects of the additive on the sulfur-fixation efficiency of the Ba-sulfur-fixation agent and also ...The crystallization behavior of desulfurization product is directly related to its high-temperature-resistant ability.Effects of the additive on the sulfur-fixation efficiency of the Ba-sulfur-fixation agent and also on the crystallization behavior of the sulfur-fixation product were studied when CaCO 3 and BaCO 3 were used as the desulfurization agent and MgO and SrCO 3 used as the assistant sulfur-fixation agent. The result shows that increase of sulfur-fixation capability for the additive is not owe to their directly react to form sulfate or interact with CaCO 3 and BaCO 3 to form composite mineral heat-resistant in high temperature, but owe to their activation to sulfur-fixation reaction of the sulfur-fixation agent.展开更多
基金Upon undertaking the Key Research and Development Program (International Cooperation) of Shanxi (Project Number: 201603D421041)the financial supports of this work by the Provincial Key Scientific Research Projects on Coal-based Low Carbon Energy of Shanxi Province (Project Number: MD2015-01)+1 种基金the National Natural Science Foundation of China-Shanxi Coal-based Low Carbon Joint Fund (U1610254)the NSFC-National Natural Science Foundation of China (No. 51476109)are gratefully acknowledged
文摘The influence of Co Mo P/medical stone and SO_4^(2-)/medical stone on sulfur behavior during the Longma coal pyrolysis was investigated in a fixed bed reactor. Moreover, the kinetics was also studied. It is found that adding SO_4^(2-)/medical stone was favorable to removal of volatile matter, while adding Co Mo P/medical stone could inhibit the emission of volatiles. Moreover, the results also showed that adding Co Mo P/medical stone made the total sulfur retention higher, while adding SO_4^(2-)/medical stone made the total sulfur retention lower. Adding modified medical stone was beneficial to removal of sulfate sulfur and pyritic sulfur, while it was beneficial to retaining organic sulfur in the residue. Furthermore, adding Co Mo P/medical stone and SO_4^(2-)/medical stone all could increase the emission of H_2S when the temperature was higher than 450℃. Judging from the kinetics study, it also can be known that addition of the natural minerals could result in a decrease of the pre-exponential factor and also change the apparent activation energy upon comparing the apparent activation energy and the pre-exponential factor of raw Longma coal at 435—537℃.
文摘Sheytoor Iron Ore deposit is located in Yazd province of Iran (Bafq). The most abundant ore is magnetite, which can be seen in the form of mass and granular tissue in various forms of self-shaped, semi-self-shaped and amorphous. The main purpose of this study is to identify the geochemical relationship of phosphorus and sulfur elements and also three-dimensional modeling of mineralization of these elements in iron ore. In order to achieve the research goal, methods such as k-mean clustering technique, concentration-volume fractal as well as block modeling with kriging estimator and Inverse Distance Weighting (IDW) interpolator were used. The model of geochemical behavior of phosphorus and sulfur elements compared to iron is of great importance because these two elements are known as deleterious elements in mineral processing and steelmaking processes, which are the post-mining stages. Existence of geochemical model and identification of elements’ behavior towards each other play a key role in optimizing mining operations in order to achieve geometallurgical goals. The results of this study are the three-dimensional model of mineralization of iron, phosphorus and sulfur elements, separation of phosphorus and sulfur mineralization communities and also presenting the model of enrichment community of these two elements. All the results are in line with geometallurgical studies and can optimize the next steps by optimizing the mining process.
文摘The interfacial behavior of sulfur and yttrium in the yttrium modified Ni 3Al based alloy IC6 during oxidation at 1100 ℃ was analyzed by X ray line scan of electron probe microstructural analysis(EPMA). The results show that the migration and segregation of sulfur to the interface between oxide scale and the substrate at high temperature is retarded owing to the presence of yttrium. This is attributed to the desulfurization by yttrium in the melt and the trapping of sulfur by yttrium rich phases during oxidation, which leads to improving the coherence between oxide scale and substrate. Another reason of increasing the high temperature oxidation resistance of alloy IC6 by the addition of yttrium is that yttrium migrates to the grain boundaries of oxides during oxidation and hence improve their strength. This results in the transformation of the oxide scale spallation cracks from intergranular cracks for alloy without yttrium to transgranular ones for yttrium modified alloy.
文摘The corrosion behaviors and mechanism of Ni-14%Cr alloys in molten salt with Na2SO4 at 1000℃ was investigated by means of XRD analysis and SEM observation. Results show that the alloys were subjected to the accelerated corrosion in molten salt and the corrosion kinetic of the alloy obeys the parabolic law. On the other hand, the corrosion-resistance of the alloy could be improved significantly by increasing of chromium content. Corrosion products may be divided into three layers, i. e. NiCr2O4, CoCr2O4, CoNi2S4, AlWO3 and Al2O3 granule are included in the outside of the scales, the continuous Al2O3 layer is localed in intermediate layer, and the sulfides is in the internal layer. The Cr2S3 phase in Ni-14Cr prevents the S and O from the matrix of the alloy. The morphology examinations tend to support the sulphidization-basic dissolution model previously proposed for hot corrosion mechanism.
基金Item Sponsored by National Key Basic Research and Development Program of China(2010CB30806)Central South University Postdoctoral Funded Project of China(120961)
文摘Desulfurization performance with low binary basicity refining slag in 72 grade tire cord steel was calculated using FactSage and it is found that sulfur content in steel decreases with the increase of basicity of slag, MgO content in slag and slag/steel ratio while sulfur partition ratio between slag and steel increases gradually with the increase of basicity of slag as well as MgO content. Experiments were carried out and the results are of great agreements with theoretical calculation. Then industrial application tests were performed in a domestic plant and good results were achieved. Sulfur content in steel decreases gradually during refining process, as a result, sulfur content in the billets is controlled in the range of 0.007 1%-0.008 1%. Sulfur content in steel refined with slag basicity of 1.21 is lower than that of 1.02, while the plasticity of oxide compound inclusions is a little better controlled in low basicity heats. Using refining slag with basicity of 1.0-1.2 and MgO content of 5%-10% and reducing the slag takeover of LD are favorable for improving the desulfurization performance and the plasticity of inclusions during the industrial production.
文摘The crystallization behavior of desulfurization product is directly related to its high-temperature-resistant ability.Effects of the additive on the sulfur-fixation efficiency of the Ba-sulfur-fixation agent and also on the crystallization behavior of the sulfur-fixation product were studied when CaCO 3 and BaCO 3 were used as the desulfurization agent and MgO and SrCO 3 used as the assistant sulfur-fixation agent. The result shows that increase of sulfur-fixation capability for the additive is not owe to their directly react to form sulfate or interact with CaCO 3 and BaCO 3 to form composite mineral heat-resistant in high temperature, but owe to their activation to sulfur-fixation reaction of the sulfur-fixation agent.
