With the application of HIGEE process intensification technology, petroleum sulfonate surfactant used for enhanced oil recovery was synthesized from petroleum fraction of Shengli crude oil with three sulfonating agent...With the application of HIGEE process intensification technology, petroleum sulfonate surfactant used for enhanced oil recovery was synthesized from petroleum fraction of Shengli crude oil with three sulfonating agents, including diluted liquid sulfur trioxide, diluted gaseous sulfur trioxide and fuming sulfuric acid. For each sulfonating agent, different operation modes (liquid-liquid or gas-liquid reaction with semi-continuous or continuous operation) were applied. The effects of various experimental conditions, such as solvent/oil mass ratio, sulfonating agent/oil mass ratio, gas/liquid ratio, gas concentration, reaction temperature, rotating speed, circulation ratio, reaction time and aging time, on the content of active matter and unsulfonated oil were investigated. Under relatively optimal reaction conditions, the target product was prepared with high mass content of active matter (up to 45.3%) and extremely low oil/water interfacial tension (4.5×10 –3 mN·m –1 ). The product quality and process efficiency are higher compared with traditional sulfonation technology.展开更多
The sulfonated poly(α-methyl styrene-b-isobutylene-b-α-methyl styrene)copolymers(S-ASIBS)with the average molar percentage of sulfonic acid(-SO_(3)H)groups(SP)ranging from 3.6 mol%to 14.3 mol%could be synthesized by...The sulfonated poly(α-methyl styrene-b-isobutylene-b-α-methyl styrene)copolymers(S-ASIBS)with the average molar percentage of sulfonic acid(-SO_(3)H)groups(SP)ranging from 3.6 mol%to 14.3 mol%could be synthesized by sulfonation of ASIBS with acetyl sulfate.The hydrophilic ionic channels were generated for proton exchange membranes(PEMs)by ion aggregation of-SO_(3)H groups and microphase separation between hydrophobic polyisobutylene and hydrophilic sulfonated poly(α-methyl styrene)segments in S-ASIBS.The proton transport ability was improved while oxidative stability was decreased by increasing SP in S-ASIBS.The appropriate SP of about 12.7 mol%in S-ASIBS provides the available PEMs with high proton transport ability,low methanol permeability and good oxidative stability.The absence of active tertiary hydrogen atoms along S-ASIBS copolymer chains avoids their attack by peroxy radicals.The residual rates of weight(RW)and proton conductivity(Rσ)of S-ASIBS-12.7 membrane after oxidation treatment for 916 h were 84.3%and 88.1%respectively,near to those of commercial Nafion 117(RW=87.9%,Rσ=90.3%).The membrane electrode assembly(MEA)could be prepared by using various S-ASIBS as PEMs for direct methanol fuel cell.The single cell with S-ASIBS-12.7 MEA behaves high performance of open circuit voltage(OCV)of 548 mV and peak power density(Pmax)of 36.1 mW·cm^(-2),which is similar to those of Nafion 117(OCV=506 mV,P_(max)=35.6 mW·cm^(-2)).To the best of our knowledge,this is the first example of advanced S-ASIBS membrane with high proton conductivity,excellent fuel barrier property and remarkable oxidative stability for promising PEMs.展开更多
Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating tempe...Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating temperature can accelerate hydrolytic kinetics and improve efficiency.In this work,magnetic sulfonated polypropylene resin(Fe_(3)O_(4)@PS-S)composites were reported for acidic-thermal hydrolysis of tylosin by employing the acidic feature of sulfonic group,the dielectric effect of resin,and the magnetic-loss effect of magnetite under microwave irradiation.As observed,a rapid and complete mitigation 100 mg/L of tylosin was achieved within 15 min by the catalysts.Acidic cleavage of tylosin was fulfilled by sulfonic groups in the composites,and microwave thermal accelerated the hydrolysis reactions due to the dielectric and magnetic-loss effects.Differentiating the dielectric and magnetic-loss effects through electromagnetic analyses indicated that the latter contributed more in converting microwave energy to heat.The interactions under multiple operational conditions were quantitatively fitted using the Behnajady model and visually demonstrated,which indicated that a synergic effect of microwave thermal-and acidichydrolyses contributed to the efficient mitigation of tylosin.The transformation products were identified and the pathways were supposed.Cleaving deoxyaminosugars groups and destructing lactone structures led to reduced antibacterial potential and toxicity reduction.The acute toxicity of tylosin and transformation products to fish,daphnia,and green algae were all classified as non-toxic.This work suggested that this synergistic acid-thermal hydrolytic method is attractive and promising in pretreating tylosin production wastewater in field.展开更多
Aqueous zinc-ion batteries(AZIBs)have emerged as a promising next-generation energy storage solution due to their high energy density,abundant resources,low cost,and high safety.However,unstable zinc anode caused by s...Aqueous zinc-ion batteries(AZIBs)have emerged as a promising next-generation energy storage solution due to their high energy density,abundant resources,low cost,and high safety.However,unstable zinc anode caused by side reactions and dendritic growth always severely worsens the long-term operation of AZIBs.Herein,a novel 3-cyclobutene sulfone(CS)additive was employed in the aqueous electrolyte to achieve a highly reversible Zn anode.The CS additive can offer strong electronegativity and high binding energy for the coordination with Zn^(2+),which enables its entry into the solvent sheath structure of Zn^(2+)and eliminates the free H_(2)O molecules from the solvated{Zn^(2+)-SO_(4)^(2-)-(H_(2)O)_(5)}.Thus,the occurrence of side reactions and dendritic growth can be effectively inhibited.Accordingly,the Zn anode achieves long cycle-life(1400 h at 1 m A cm^(-2),1 m Ah cm^(-2),and 400 h at 5 m A cm^(-2),5 m Ah cm^(-2))and high average coulombic efficiency(99.5% over 500 cycles at 10 m A cm^(-2),1 m Ah cm^(-2)).Besides,the assembled Zn||NH_(4)V_(4)O_(10)full cell suggests enhanced cycling reversibility(123.8 m Ah g^(-1)over 500 cycles at 2 A g^(-1),84.9 m Ah g^(-1)over 800 cycles at 5 A g^(-1))and improved rate capability(139.1 m Ah g^(-1)at 5 A g^(-1)).This work may exhibit the creative design and deep understanding of sulfone-based electrolyte additives for the achievement of high-performance AZIBs.展开更多
Reclaimed water for irrigation or hydroponic cultivation provides exposure pathways for per-and polyfluoroalkyl substances(PFAS)to enter the human food chain.This study employed hydroponic methods to investigate the b...Reclaimed water for irrigation or hydroponic cultivation provides exposure pathways for per-and polyfluoroalkyl substances(PFAS)to enter the human food chain.This study employed hydroponic methods to investigate the behavior of legacy PFAS and emerging chlorinated polyfluoroalkyl ether sulfonic acids(Cl-PFESAs)in lettuce grown under environment-related exposure levels and assessed the human exposure risks from consuming contaminated lettuce.Overall,PFAS in lettuce were concentration-dependent,with long-chain PFAS tending to accumulate in roots and short-chain PFAS accumulating more in shoots.The enrichment of PFAS in lettuce was jointly influenced by their chain length and polar functional groups.Specifically,the root concentration factors(RCFs)of PFAS generally increased with increasing chain length,and RCF values of most perfluoroalkanesulfonic acids(PFSAs)were significantly higher than those of perfluoroalkyl carboxylic acids(PFCAs)with the same chain length(p<0.01),while the translocation factors(TFs)exhibited opposite trends.RCF values of perfluorooctane sulfonate(PFOS)and its alternatives,Cl-PFESAs,were ranked as follows:8:2 Cl-PFESA(mean:139)>6:2 Cl-PFESA(28.6)>PFOS(25.7),which was attributed to the increased molecular size and hydrophobicity resulting from the insertion of ether bonds and additional CF2 in 8:2 Cl-PFESA.Notably,TF value of 8:2 Cl-PFESA(mean:0.007)was the smallest among all PFAS,indicating 8:2 Cl-PFESA was difficult to transfer to nutritional compartments.Adults and children would exceed the most conservative health-based reference dose(RfD)by consuming approximately 15.9–148 g and 7.92–74.0 g of contaminated lettuce per day,implying high health risks.展开更多
Photocatalytic technology has been proven to be a simple and effective method for degrading recalcitrant organic pollutants.In this study,a series of Z-scheme heterojunction nanocomposites composed of CeO_(2)and terep...Photocatalytic technology has been proven to be a simple and effective method for degrading recalcitrant organic pollutants.In this study,a series of Z-scheme heterojunction nanocomposites composed of CeO_(2)and terephthalic acid-modified WO_(3) was prepared and further used as photocatalysts for perfluorobutane sulfonate(PFBS)degradation.In this design,terephthalic acid was used as an electron recombination center and heterojunction mediator,which effectively enhances the migration ability of electron-hole pairs and the physicochemical stability of the catalyst.In addition,in situ synthesis of CeO_(2)onto the WO_(3) surface by the coordinate bond between terephthalic acid and Ce ions can avoid CeO_(2)agglomeration.As a result,the CeO_(2)@WO_(3) photocatalyst exhibits excellent PFBS degradation ability(94%for CeO_(2)@WO_(3) vs.19%for CeO_(2)).After the fifth cyclic degradation experiment,the CeO_(2)@WO_(3) photocatalyst still maintains stable degradation efficiency.Furthermore,the reaction mechanism of the PFBS in CeO_(2)@WO_(3) photocatalytic process was analyzed by free radical trapping experiment and liquid chromatography tandem mass spectrometry(LC-MS)technique.This study provides new insights for constructing Z-scheme heterojunction and demonstrates that CeO_(2)@WO_(3) photocatalysts possess a promising prospect for degrading PFBS pollutants.展开更多
High-temperature and high-salt reservoirs are often accompanied by serious gas channeling in gas flooding,which will greatly affect the effect of gas injection development,so in-situ foaming of temperature-resistant a...High-temperature and high-salt reservoirs are often accompanied by serious gas channeling in gas flooding,which will greatly affect the effect of gas injection development,so in-situ foaming of temperature-resistant and salt-resistant foaming agents is commonly used to control gas channeling.The feasibility of the compound system of dodecyl hydroxyl sulfobetaine(HSB12)andα-olefin sulfonate(AOS)as foaming agent for sandstone reservoir was studied at 130℃and 22×10^(4)mg/L.The results showed that the foaming agent(HSB12 and AOS were compounded in a 6:1 mass ratio,in this article,this foaming agent is simply referred to as SA61)had good solubility in 22×10^(4)mg/L simulated formation water.Besides,the foaming volume of SA61 and HSB12 was similar,but the foam decay half-life of SA61was 10-25 times higher than that of HSB12.The foaming performance of SA61 on the surface of quartz sand remained above 90%of that before adsorption.The strong interaction between HSB12 and AOS in the compound system SA61 was demonstrated by surface rheological measurements and NMR studies of surfactants.The results of co re flow test showed that SA61 had better mobility control ability than HSB12under the same surfactant concentration.In addition,SA61 showed a selective mobility reduction in2005.30 and 632.00 mD cores.The above research results can guide the selection and application of foaming agent in clastic reservoir.展开更多
Temperature-sensitive random copolymerized nanohydrogels were prepared via a one-pot polymerization method using N-isopropylacrylamide(NIPAM)and 2-acrylamido-2-methylpropanesulfonic acid(AMPS)as raw materials.Transmis...Temperature-sensitive random copolymerized nanohydrogels were prepared via a one-pot polymerization method using N-isopropylacrylamide(NIPAM)and 2-acrylamido-2-methylpropanesulfonic acid(AMPS)as raw materials.Transmission electron microscopy(TEM)and differential scanning calorimetry(DSC)analyses revealed the partially crystallized porous nanostructure of the gels,which is consistent with the characteristics of porous nanohydrogel materials.The low-molecular-weight polymers exhibited enhancement and sharpening of the end group peaks in Fourier-transform infrared(FTIR),X-ray photoelectron spectroscopy(XPS),and nuclear magnetic resonance hydrogen(^(1)H-NMR)spectra due to the high proportion of small molecules or low-molecular-weight chain segments.In turn,the high-molecular-weight polymers showed pronounced peaks in the main chain segments because of the long-chain effect.Hygroscopicity increased with the molecular weight of the selected polymers,but was inhibited by temperatures below the lower critical solution temperature(LCST).Meanwhile,moisture desorption was faster in low-molecular-weight samples,and the overall moisture desorption rate rose above the LCST value.According to the kinetic analysis,the moisture absorption process conformed to the quasi-primary or quasi-secondary kinetic model,whereas the moisture desorption followed the quasi-secondary model.Moisture cycling experiments showed that the material maintained stable moisture absorption and desorption performance after several cycles,which is essential for long-term cycling.展开更多
Polyethylene oxide(PEO)-based solid polymer electrolytes are considered as promising material for solidstate sodium metallic batteries(SSMBs).However,their poor interfacial stability with high-voltage cathode limits t...Polyethylene oxide(PEO)-based solid polymer electrolytes are considered as promising material for solidstate sodium metallic batteries(SSMBs).However,their poor interfacial stability with high-voltage cathode limits their application in high-energy–density solid-state batteries.Herein,a uniform,sulfur-containing inorganic–organic composite cathode–electrolyte interphase layer was in situ formed by the addition of sodium polyvinyl sulfonate(NaPVS).The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(3)(NVP)|PEOsodium hexauorophosphate(NaPF6)|Na battery shows a higher initial capacity of 111.2 mAh.g^(-1)and an ultra-high capacity retention of 90.5%after 300 cycles.The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF)|PEO-NaPF_(6)|Na battery with the high cutoff voltage of 4.2 V showed a specific discharge capacity of 88.9 mAh.g^(-1)at 0.5C for 100 cycles with a capacity retention of 79%,which is much better than that of the pristine-NVPF(PR-NVPF)|PEO-NaPF_(6)|Na battery(33.2%).The addition of NaPVS not only enhances the diffusion kinetics at the interface but also improves the rate performance and stability of the battery,thus bolstering its viability for high-energy applications.In situ phase tracking further elucidates that NaPVS effectively mitigates self-discharge induced by the oxidative decomposition of PEO at high temperature.This work proposes a general strategy to maintain the structural stability of the cathode–electrolyte interface in PEO-based high-performance SSMBs.展开更多
Andrographolide sulfonate(AS)is a sulfonated derivative of andrographolide extracted from Andrographis paniculata(Burm.f.)Nees,and has been approved for several decades in China.The present study aimed to investigate ...Andrographolide sulfonate(AS)is a sulfonated derivative of andrographolide extracted from Andrographis paniculata(Burm.f.)Nees,and has been approved for several decades in China.The present study aimed to investigate the novel therapeutic application and possible mechanisms of AS in the treatment of rheumatoid arthritis.Results indicated that administration of AS by injection or gavage significantly reduced the paw swelling,improved body weights,and attenuated pathological changes in joints of rats with adjuvant-induced arthritis.Additionally,the levels of tumor necrosis factor-alpha(TNF-α),interleukin-6(IL-6),and IL-1β in the serum and ankle joints were reduced.Bioinformatics analysis,along with the spleen index and measurements of IL-17 and IL-10 levels,suggested a potential relationship between AS and Th17 cells under arthritic conditions.In vitro,AS was shown to block Th17 cell differentiation,as evidenced by the reduced percentages of CD4^(+)IL-17A^(+)T cells and decreased expression levels of RORγt,IL-17A,IL-17F,IL-21,and IL-22,without affecting the cell viability and apoptosis.This effect was attributed to the limited glycolysis,as indicated by metabolomics analysis,reduced glucose uptake,and p H measurements.Further investigation revealed that AS might bind to hexokinase2(HK2)to down-regulate the protein levels of HK2 but not glyceraldehyde-3-phosphate dehydrogenase(GAPDH)or pyruvate kinase M2(PKM2),and overexpression of HK2 reversed the inhibition of AS on Th17 cell differentiation.Furthermore,AS impaired the activation of phosphatidylinositol 3-kinase(PI3K)/protein kinase B(AKT)signals in vivo and in vitro,which was abolished by the addition of lactate.In conclusion,AS significantly improved adjuvant-induced arthritis(AIA)in rats by inhibiting glycolysis-mediated activation of PI3K/AKT to restrain Th17 cell differentiation.展开更多
The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing...The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing the amount of Pt would worsen the problems caused by the adsorption of perfluorinated sulfonic acid(PFSA)ionomers to Pt via the side chains,namely,blocking the active sites of Pt and inducing densely packed layers of fluorocarbon backbones on Pt surface to obstruct local O_(2)transport at the Pt/PFSA interfaces.This work aims at optimizing the Pt/ionomer interface to mitigate the sulfonate adsorption and in the meantime to reduce the local O_(2)transport resistance(R_(local)),by using a porous composite of 1-butyl-3-methylimidazolium hydrogen sulfate ionic liquid(IL)modified MOF-808(BMImHSO_(4)@MOF-808)as additive in cathodic catalyst layer(CCL).Through detailed physical,spectroscopic and electrochemical characterizations,we demonstrate a three-fold optimization mechanism of Pt/ionomer interface structure by BMImHSO_(4)@MOF-808:the unsaturated metal sites in MOF-808 effectively inhibit the sulfonate adsorption on Pt through coordination with the sulfonates of PFSA,thereby improving catalyst utilization;the pores in MOF-808 establish efficient transport channels for gaseous oxygen,significantly reducing R_(local);the IL modification layers facilitate the formation of continuous proton transport networks,increasing proton conductivity.The incorporation of BMImHSO_(4)@MOF-808 in a low-Pt CCL(0.1 mg_(Pt)cm^(-2))yields a peak power density of 1.9 W cm^(-2)for PEMFC under H_(2)-O_(2)condition,and ca.20%increase of power density under H_(2)-air condition as compared with conventional CCL,indicating the prospect of IL-MOF composites as an efficient additive to enhance the performance of PEMFCs.展开更多
Herein,an oxygen-doped porous g-C_(3)N_(4)photocatalyst modified with atomically dispersed Fe(Fe_(1)/OPCN)issuccessfully prepared and exhibits significant superiority in removing refractory sulfonic azo contaminants f...Herein,an oxygen-doped porous g-C_(3)N_(4)photocatalyst modified with atomically dispersed Fe(Fe_(1)/OPCN)issuccessfully prepared and exhibits significant superiority in removing refractory sulfonic azo contaminants fromwater via catalyst-contaminant interaction.The elimination performance of Fe_(1)/OPCN towards acid red 9,acidred 13 and amaranth containing similar azonaphthalene structure and increasing sulfonic acid groups increasesgradually.The amaranth degradation rate of Fe_(1)/OPCN is 17.7 and 6.1 times as that of homogeneous Fenton andOPCN,respectively.In addition,Fe_(1)/OPCN also has more outstanding removal activities towards other con-taminantswith sulfonic acid and azo groups alone.The considerable enhancement for removing sulfonic azocontaminants of Fe_(1)/OPCN is mainly ascribed to the following aspects:(1)The modified Fe could enhance theadsorption towards sulfonic azo compounds to accelerate the mass transfer,act as e^(-)acceptor to promoteinterfacial charge separation,and trigger the self-Fenton reaction to convert in-situ generated H_(2)O_(2)into·OH.(2)Fe(Ⅲ)could coordinate with-N=N-to form d-πconjugation,which could attract e^(-)transfer to attack-N=N-bond.Meanwhile,the inhibited charge recombination could release more free h^(þ)to oxidize sulfonicacid groups into SO4^(-)·.(3)Under the cooperation of abundant multiple active species(·O_(2)^(-),h^(þ),e^(-),·OH,SO4^(-)·)formed during the degradation reaction,sulfonic azo compounds could be completely mineralized into harmlesssmall molecules(CO_(2),H_(2)O,etc.)by means of-N=N-cleavage,hydroxyl substitution,and aromatic ringopening.This work offers a novel approach for effectively eliminating refractory sulfonic azo compounds fromwastewater.展开更多
Flexible pressure sensors are indispensable components in wearable electronics for health monitoring and exercise management.However,existing pressure sensors face a critical trade-off between high sensitivity and wid...Flexible pressure sensors are indispensable components in wearable electronics for health monitoring and exercise management.However,existing pressure sensors face a critical trade-off between high sensitivity and wide detection range.Herein,we present novel flexible pressure sensors based on poly(3,4-ethylenedioxy-thiophene):poly(styrene sulfonate)(PEDOT:PSS)and thermoplastic polyurethane(TPU),fabricated by direct ink writing(DIW)technology with a sacrificial template strategy.The integration of the high conductivity of PEDOT:PSS,the mechanical durability of TPU,and the engineered hierarchical porous structure with irregular surface topography enables the PEDOT:PSS/TPU-based pressure sensors(PPSs)to achieve an exceptionally wide detection range(0-1044 kPa),high sensitivity(30.178 kPa^(−1)),and outstanding cycling stability(over 10,000 cycles).Leveraging these advantages,the sensors have demonstrated exceptional performance in precise physiological monitoring,effective pressure mapping through sensor arrays,and reliable operation in extreme environments(e.g.,cryogenic conditions at−196°C and underwater).Furthermore,the successful integration with LED circuits and wireless Bluetooth systems highlights their potential for next-generation wearable electronics and personalized healthcare monitoring.展开更多
The floatability of andalusite and quartz was studied using sodium petroleum sulfonate as collector, being successfully applied in the real ore separation. The collecting performance on minerals was interpreted by mea...The floatability of andalusite and quartz was studied using sodium petroleum sulfonate as collector, being successfully applied in the real ore separation. The collecting performance on minerals was interpreted by means of zeta potential measurement and infrared spectroscopic analysis. The single mineral experiments showed that andalusite got good floatability in acidic pH region while quartz exhibited very poor floatability in the whole pH range. At pH 3, the presence of Fe3+ obviously activated quartz, causing the identical flotation behavior of the two minerals, and calcium lignosulphonate exhibited good selective inhibition to quartz. The real ore test results showed that andalusite concentrate with 53.46% Al2O3 and quartz concentrate with 92.74% SiO2 were obtained. The zeta potential and infrared spectroscopic analysis results indicated that chemical adsorption occurred between sodium petroleum sulfonate and andalusite.展开更多
The photochemical reaction process of anthraquinone-2-sodium sulfonate （AQS） in the mixture of water （H2O） and N-butylpyridinium tetrafluoroborate （[BPy] [BF4]） was studied using the laser flash photolysis techn...The photochemical reaction process of anthraquinone-2-sodium sulfonate （AQS） in the mixture of water （H2O） and N-butylpyridinium tetrafluoroborate （[BPy] [BF4]） was studied using the laser flash photolysis technique. Experimental results show that the excited triplet of AQS （3AQS＊） could react rapidly with H2O and the transient absorption spectra greatly changed by increasing the volume fraction of the ionic liquid （VIL） in [BPy][BF4]/H2O mixtures. The absorbance at 510 nm increased gradually with increasing VIL when 0〈VIL〈0.1. By contrast, the absorbance decreased gradually when VIL〉0.1. Otherwise, the absorbance of the band near 380 nm steadily increased. The apparent kinetic parameters of transient species B and ^3AQS＊ are obtained approximately. 3AQS＊ abstracting hydrogen from [BPy]＋ was also explored. It was deduced that the 350-420 nm band was the superposition of the peaks of 3AQS＊ and AQSH＇. The two reactions of 3AQS＊ with [BPy][BF4] and H2O are a pair of competitive reactions. We also concluded that the entire reaction processes slow down in the case of high [BPy] [BF4] concentrations.展开更多
Synthesis of p toluidine o sulfonic acid from p toluidine by sulfonation in solvent was studied,and effects of various reaction conditions or factors on the reaction were discussed in detail.As a result,the follow...Synthesis of p toluidine o sulfonic acid from p toluidine by sulfonation in solvent was studied,and effects of various reaction conditions or factors on the reaction were discussed in detail.As a result,the following optimum process conditions are presented:50 mL dichlorobenzene,2%～5% oleum,molar ratio of sulfonating agent to p toluidine is 1.10～1.12,oleum is dropped in the reaction system in 10 min or so,sulfate formation time is 2 h,distillation lasts 8 h.Under the above conditions,the purity and the yield of p toluidine o sulfonic acid are better than that of the same product made in Japan.展开更多
Anionic surfactant sodium dodecyl benzene sulfonate(SDBS)at varying concentrations was selected to investigate the influence on the wettability of Zhaozhuang Coal by molecular dynamics simulation.Six groups of water/s...Anionic surfactant sodium dodecyl benzene sulfonate(SDBS)at varying concentrations was selected to investigate the influence on the wettability of Zhaozhuang Coal by molecular dynamics simulation.Six groups of water/surfactant/coal systems with different concentrations were constructed.The influence of surfactant with different concentrations on the wettability of coal was concluded by analyzing various properties from the energetic behaviors to the dynamic characteristics.The results show that the interfacial tension decreases sharply and then rises slowly with the increase of SDBS surfactant concentration,obtaining that surfactants can obviously reduce the interfacial tension.The surfactant molecules could be detected at the water/coal interface through analyzing the system’s relative concentration distribution.In addition,the difference in the wettability of surfactants on coal surfaces is caused by the spatial distribution differences of alkyl chains and the benzene ring of the surfactant molecules.And the negative interaction energy between SDBS and the coal surface indicates that adsorption process is spontaneous.Furthermore,it is of great practical significance for improving the dust reduction effect and reducing the disaster of coal dust by exploring the effects of surfactant molecules on the wettability of coal.展开更多
基金Supported by the National Natural Science Foundation of China （20821004 20990221） the National High Technology Research and Development Program of China （2006AA030202）
文摘With the application of HIGEE process intensification technology, petroleum sulfonate surfactant used for enhanced oil recovery was synthesized from petroleum fraction of Shengli crude oil with three sulfonating agents, including diluted liquid sulfur trioxide, diluted gaseous sulfur trioxide and fuming sulfuric acid. For each sulfonating agent, different operation modes (liquid-liquid or gas-liquid reaction with semi-continuous or continuous operation) were applied. The effects of various experimental conditions, such as solvent/oil mass ratio, sulfonating agent/oil mass ratio, gas/liquid ratio, gas concentration, reaction temperature, rotating speed, circulation ratio, reaction time and aging time, on the content of active matter and unsulfonated oil were investigated. Under relatively optimal reaction conditions, the target product was prepared with high mass content of active matter (up to 45.3%) and extremely low oil/water interfacial tension (4.5×10 –3 mN·m –1 ). The product quality and process efficiency are higher compared with traditional sulfonation technology.
基金financially supported by the National Natural Science Foundation of China (No. 21774006)
文摘The sulfonated poly(α-methyl styrene-b-isobutylene-b-α-methyl styrene)copolymers(S-ASIBS)with the average molar percentage of sulfonic acid(-SO_(3)H)groups(SP)ranging from 3.6 mol%to 14.3 mol%could be synthesized by sulfonation of ASIBS with acetyl sulfate.The hydrophilic ionic channels were generated for proton exchange membranes(PEMs)by ion aggregation of-SO_(3)H groups and microphase separation between hydrophobic polyisobutylene and hydrophilic sulfonated poly(α-methyl styrene)segments in S-ASIBS.The proton transport ability was improved while oxidative stability was decreased by increasing SP in S-ASIBS.The appropriate SP of about 12.7 mol%in S-ASIBS provides the available PEMs with high proton transport ability,low methanol permeability and good oxidative stability.The absence of active tertiary hydrogen atoms along S-ASIBS copolymer chains avoids their attack by peroxy radicals.The residual rates of weight(RW)and proton conductivity(Rσ)of S-ASIBS-12.7 membrane after oxidation treatment for 916 h were 84.3%and 88.1%respectively,near to those of commercial Nafion 117(RW=87.9%,Rσ=90.3%).The membrane electrode assembly(MEA)could be prepared by using various S-ASIBS as PEMs for direct methanol fuel cell.The single cell with S-ASIBS-12.7 MEA behaves high performance of open circuit voltage(OCV)of 548 mV and peak power density(Pmax)of 36.1 mW·cm^(-2),which is similar to those of Nafion 117(OCV=506 mV,P_(max)=35.6 mW·cm^(-2)).To the best of our knowledge,this is the first example of advanced S-ASIBS membrane with high proton conductivity,excellent fuel barrier property and remarkable oxidative stability for promising PEMs.
基金supported by the National Natural Science Foundation of China(Nos.51978052 and 22306012)the National Key Research and Development Program of China(No.2023YFC3711300)the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110578).
文摘Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating temperature can accelerate hydrolytic kinetics and improve efficiency.In this work,magnetic sulfonated polypropylene resin(Fe_(3)O_(4)@PS-S)composites were reported for acidic-thermal hydrolysis of tylosin by employing the acidic feature of sulfonic group,the dielectric effect of resin,and the magnetic-loss effect of magnetite under microwave irradiation.As observed,a rapid and complete mitigation 100 mg/L of tylosin was achieved within 15 min by the catalysts.Acidic cleavage of tylosin was fulfilled by sulfonic groups in the composites,and microwave thermal accelerated the hydrolysis reactions due to the dielectric and magnetic-loss effects.Differentiating the dielectric and magnetic-loss effects through electromagnetic analyses indicated that the latter contributed more in converting microwave energy to heat.The interactions under multiple operational conditions were quantitatively fitted using the Behnajady model and visually demonstrated,which indicated that a synergic effect of microwave thermal-and acidichydrolyses contributed to the efficient mitigation of tylosin.The transformation products were identified and the pathways were supposed.Cleaving deoxyaminosugars groups and destructing lactone structures led to reduced antibacterial potential and toxicity reduction.The acute toxicity of tylosin and transformation products to fish,daphnia,and green algae were all classified as non-toxic.This work suggested that this synergistic acid-thermal hydrolytic method is attractive and promising in pretreating tylosin production wastewater in field.
基金the financial support from the Foshan Talents Special Foundation(BKBS202003)。
文摘Aqueous zinc-ion batteries(AZIBs)have emerged as a promising next-generation energy storage solution due to their high energy density,abundant resources,low cost,and high safety.However,unstable zinc anode caused by side reactions and dendritic growth always severely worsens the long-term operation of AZIBs.Herein,a novel 3-cyclobutene sulfone(CS)additive was employed in the aqueous electrolyte to achieve a highly reversible Zn anode.The CS additive can offer strong electronegativity and high binding energy for the coordination with Zn^(2+),which enables its entry into the solvent sheath structure of Zn^(2+)and eliminates the free H_(2)O molecules from the solvated{Zn^(2+)-SO_(4)^(2-)-(H_(2)O)_(5)}.Thus,the occurrence of side reactions and dendritic growth can be effectively inhibited.Accordingly,the Zn anode achieves long cycle-life(1400 h at 1 m A cm^(-2),1 m Ah cm^(-2),and 400 h at 5 m A cm^(-2),5 m Ah cm^(-2))and high average coulombic efficiency(99.5% over 500 cycles at 10 m A cm^(-2),1 m Ah cm^(-2)).Besides,the assembled Zn||NH_(4)V_(4)O_(10)full cell suggests enhanced cycling reversibility(123.8 m Ah g^(-1)over 500 cycles at 2 A g^(-1),84.9 m Ah g^(-1)over 800 cycles at 5 A g^(-1))and improved rate capability(139.1 m Ah g^(-1)at 5 A g^(-1)).This work may exhibit the creative design and deep understanding of sulfone-based electrolyte additives for the achievement of high-performance AZIBs.
基金supported by the Fundamental Research Funds for Central Non-profit Scientific Institution(No.1610132022015)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB0750200)the National Natural Science Foundation of China(No.22176198).
文摘Reclaimed water for irrigation or hydroponic cultivation provides exposure pathways for per-and polyfluoroalkyl substances(PFAS)to enter the human food chain.This study employed hydroponic methods to investigate the behavior of legacy PFAS and emerging chlorinated polyfluoroalkyl ether sulfonic acids(Cl-PFESAs)in lettuce grown under environment-related exposure levels and assessed the human exposure risks from consuming contaminated lettuce.Overall,PFAS in lettuce were concentration-dependent,with long-chain PFAS tending to accumulate in roots and short-chain PFAS accumulating more in shoots.The enrichment of PFAS in lettuce was jointly influenced by their chain length and polar functional groups.Specifically,the root concentration factors(RCFs)of PFAS generally increased with increasing chain length,and RCF values of most perfluoroalkanesulfonic acids(PFSAs)were significantly higher than those of perfluoroalkyl carboxylic acids(PFCAs)with the same chain length(p<0.01),while the translocation factors(TFs)exhibited opposite trends.RCF values of perfluorooctane sulfonate(PFOS)and its alternatives,Cl-PFESAs,were ranked as follows:8:2 Cl-PFESA(mean:139)>6:2 Cl-PFESA(28.6)>PFOS(25.7),which was attributed to the increased molecular size and hydrophobicity resulting from the insertion of ether bonds and additional CF2 in 8:2 Cl-PFESA.Notably,TF value of 8:2 Cl-PFESA(mean:0.007)was the smallest among all PFAS,indicating 8:2 Cl-PFESA was difficult to transfer to nutritional compartments.Adults and children would exceed the most conservative health-based reference dose(RfD)by consuming approximately 15.9–148 g and 7.92–74.0 g of contaminated lettuce per day,implying high health risks.
基金Project supported by the National Natural Science Foundation of China(52300206)the Natural Science Foundation of Jiangsu Province(BK20230705)+2 种基金Industry-University Research Cooperation Project of Jiangsu Province,China(BY20221227)Natural Science Foundation of the Jiangsu Higher Education Institutions of China(22KJB610014)the Talent-Recruiting Program of Nanjing Institute of Technology(YKJ202124)。
文摘Photocatalytic technology has been proven to be a simple and effective method for degrading recalcitrant organic pollutants.In this study,a series of Z-scheme heterojunction nanocomposites composed of CeO_(2)and terephthalic acid-modified WO_(3) was prepared and further used as photocatalysts for perfluorobutane sulfonate(PFBS)degradation.In this design,terephthalic acid was used as an electron recombination center and heterojunction mediator,which effectively enhances the migration ability of electron-hole pairs and the physicochemical stability of the catalyst.In addition,in situ synthesis of CeO_(2)onto the WO_(3) surface by the coordinate bond between terephthalic acid and Ce ions can avoid CeO_(2)agglomeration.As a result,the CeO_(2)@WO_(3) photocatalyst exhibits excellent PFBS degradation ability(94%for CeO_(2)@WO_(3) vs.19%for CeO_(2)).After the fifth cyclic degradation experiment,the CeO_(2)@WO_(3) photocatalyst still maintains stable degradation efficiency.Furthermore,the reaction mechanism of the PFBS in CeO_(2)@WO_(3) photocatalytic process was analyzed by free radical trapping experiment and liquid chromatography tandem mass spectrometry(LC-MS)technique.This study provides new insights for constructing Z-scheme heterojunction and demonstrates that CeO_(2)@WO_(3) photocatalysts possess a promising prospect for degrading PFBS pollutants.
基金financial support from the Major Scientific and Technological Projects of CNPC(Award No.ZD2019-183-007)。
文摘High-temperature and high-salt reservoirs are often accompanied by serious gas channeling in gas flooding,which will greatly affect the effect of gas injection development,so in-situ foaming of temperature-resistant and salt-resistant foaming agents is commonly used to control gas channeling.The feasibility of the compound system of dodecyl hydroxyl sulfobetaine(HSB12)andα-olefin sulfonate(AOS)as foaming agent for sandstone reservoir was studied at 130℃and 22×10^(4)mg/L.The results showed that the foaming agent(HSB12 and AOS were compounded in a 6:1 mass ratio,in this article,this foaming agent is simply referred to as SA61)had good solubility in 22×10^(4)mg/L simulated formation water.Besides,the foaming volume of SA61 and HSB12 was similar,but the foam decay half-life of SA61was 10-25 times higher than that of HSB12.The foaming performance of SA61 on the surface of quartz sand remained above 90%of that before adsorption.The strong interaction between HSB12 and AOS in the compound system SA61 was demonstrated by surface rheological measurements and NMR studies of surfactants.The results of co re flow test showed that SA61 had better mobility control ability than HSB12under the same surfactant concentration.In addition,SA61 showed a selective mobility reduction in2005.30 and 632.00 mD cores.The above research results can guide the selection and application of foaming agent in clastic reservoir.
文摘Temperature-sensitive random copolymerized nanohydrogels were prepared via a one-pot polymerization method using N-isopropylacrylamide(NIPAM)and 2-acrylamido-2-methylpropanesulfonic acid(AMPS)as raw materials.Transmission electron microscopy(TEM)and differential scanning calorimetry(DSC)analyses revealed the partially crystallized porous nanostructure of the gels,which is consistent with the characteristics of porous nanohydrogel materials.The low-molecular-weight polymers exhibited enhancement and sharpening of the end group peaks in Fourier-transform infrared(FTIR),X-ray photoelectron spectroscopy(XPS),and nuclear magnetic resonance hydrogen(^(1)H-NMR)spectra due to the high proportion of small molecules or low-molecular-weight chain segments.In turn,the high-molecular-weight polymers showed pronounced peaks in the main chain segments because of the long-chain effect.Hygroscopicity increased with the molecular weight of the selected polymers,but was inhibited by temperatures below the lower critical solution temperature(LCST).Meanwhile,moisture desorption was faster in low-molecular-weight samples,and the overall moisture desorption rate rose above the LCST value.According to the kinetic analysis,the moisture absorption process conformed to the quasi-primary or quasi-secondary kinetic model,whereas the moisture desorption followed the quasi-secondary model.Moisture cycling experiments showed that the material maintained stable moisture absorption and desorption performance after several cycles,which is essential for long-term cycling.
基金supported by the Natural Science Foundation of China(No.22109079)the Natural Science Foundation of China(No.21973008)+2 种基金the Natural Science Foundation of China(No.22179010)the National Key R&D Program of China(No.2021YFB2400200)Taishan Scholars of Shandong Province(No.tsqnz20231212)。
文摘Polyethylene oxide(PEO)-based solid polymer electrolytes are considered as promising material for solidstate sodium metallic batteries(SSMBs).However,their poor interfacial stability with high-voltage cathode limits their application in high-energy–density solid-state batteries.Herein,a uniform,sulfur-containing inorganic–organic composite cathode–electrolyte interphase layer was in situ formed by the addition of sodium polyvinyl sulfonate(NaPVS).The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(3)(NVP)|PEOsodium hexauorophosphate(NaPF6)|Na battery shows a higher initial capacity of 111.2 mAh.g^(-1)and an ultra-high capacity retention of 90.5%after 300 cycles.The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF)|PEO-NaPF_(6)|Na battery with the high cutoff voltage of 4.2 V showed a specific discharge capacity of 88.9 mAh.g^(-1)at 0.5C for 100 cycles with a capacity retention of 79%,which is much better than that of the pristine-NVPF(PR-NVPF)|PEO-NaPF_(6)|Na battery(33.2%).The addition of NaPVS not only enhances the diffusion kinetics at the interface but also improves the rate performance and stability of the battery,thus bolstering its viability for high-energy applications.In situ phase tracking further elucidates that NaPVS effectively mitigates self-discharge induced by the oxidative decomposition of PEO at high temperature.This work proposes a general strategy to maintain the structural stability of the cathode–electrolyte interface in PEO-based high-performance SSMBs.
基金supported by the project of Central Funds Guiding the Local Science and Technology Development(No.20212ZDD02010)。
文摘Andrographolide sulfonate(AS)is a sulfonated derivative of andrographolide extracted from Andrographis paniculata(Burm.f.)Nees,and has been approved for several decades in China.The present study aimed to investigate the novel therapeutic application and possible mechanisms of AS in the treatment of rheumatoid arthritis.Results indicated that administration of AS by injection or gavage significantly reduced the paw swelling,improved body weights,and attenuated pathological changes in joints of rats with adjuvant-induced arthritis.Additionally,the levels of tumor necrosis factor-alpha(TNF-α),interleukin-6(IL-6),and IL-1β in the serum and ankle joints were reduced.Bioinformatics analysis,along with the spleen index and measurements of IL-17 and IL-10 levels,suggested a potential relationship between AS and Th17 cells under arthritic conditions.In vitro,AS was shown to block Th17 cell differentiation,as evidenced by the reduced percentages of CD4^(+)IL-17A^(+)T cells and decreased expression levels of RORγt,IL-17A,IL-17F,IL-21,and IL-22,without affecting the cell viability and apoptosis.This effect was attributed to the limited glycolysis,as indicated by metabolomics analysis,reduced glucose uptake,and p H measurements.Further investigation revealed that AS might bind to hexokinase2(HK2)to down-regulate the protein levels of HK2 but not glyceraldehyde-3-phosphate dehydrogenase(GAPDH)or pyruvate kinase M2(PKM2),and overexpression of HK2 reversed the inhibition of AS on Th17 cell differentiation.Furthermore,AS impaired the activation of phosphatidylinositol 3-kinase(PI3K)/protein kinase B(AKT)signals in vivo and in vitro,which was abolished by the addition of lactate.In conclusion,AS significantly improved adjuvant-induced arthritis(AIA)in rats by inhibiting glycolysis-mediated activation of PI3K/AKT to restrain Th17 cell differentiation.
文摘The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing the amount of Pt would worsen the problems caused by the adsorption of perfluorinated sulfonic acid(PFSA)ionomers to Pt via the side chains,namely,blocking the active sites of Pt and inducing densely packed layers of fluorocarbon backbones on Pt surface to obstruct local O_(2)transport at the Pt/PFSA interfaces.This work aims at optimizing the Pt/ionomer interface to mitigate the sulfonate adsorption and in the meantime to reduce the local O_(2)transport resistance(R_(local)),by using a porous composite of 1-butyl-3-methylimidazolium hydrogen sulfate ionic liquid(IL)modified MOF-808(BMImHSO_(4)@MOF-808)as additive in cathodic catalyst layer(CCL).Through detailed physical,spectroscopic and electrochemical characterizations,we demonstrate a three-fold optimization mechanism of Pt/ionomer interface structure by BMImHSO_(4)@MOF-808:the unsaturated metal sites in MOF-808 effectively inhibit the sulfonate adsorption on Pt through coordination with the sulfonates of PFSA,thereby improving catalyst utilization;the pores in MOF-808 establish efficient transport channels for gaseous oxygen,significantly reducing R_(local);the IL modification layers facilitate the formation of continuous proton transport networks,increasing proton conductivity.The incorporation of BMImHSO_(4)@MOF-808 in a low-Pt CCL(0.1 mg_(Pt)cm^(-2))yields a peak power density of 1.9 W cm^(-2)for PEMFC under H_(2)-O_(2)condition,and ca.20%increase of power density under H_(2)-air condition as compared with conventional CCL,indicating the prospect of IL-MOF composites as an efficient additive to enhance the performance of PEMFCs.
基金supported by the Natural Science Foundation of Jiangsu Province(BK20221541)National Natural Science Foundation of China(21707052)Jiangsu Agriculture Science and Technology Innovation Fund(CX(20)3108).
文摘Herein,an oxygen-doped porous g-C_(3)N_(4)photocatalyst modified with atomically dispersed Fe(Fe_(1)/OPCN)issuccessfully prepared and exhibits significant superiority in removing refractory sulfonic azo contaminants fromwater via catalyst-contaminant interaction.The elimination performance of Fe_(1)/OPCN towards acid red 9,acidred 13 and amaranth containing similar azonaphthalene structure and increasing sulfonic acid groups increasesgradually.The amaranth degradation rate of Fe_(1)/OPCN is 17.7 and 6.1 times as that of homogeneous Fenton andOPCN,respectively.In addition,Fe_(1)/OPCN also has more outstanding removal activities towards other con-taminantswith sulfonic acid and azo groups alone.The considerable enhancement for removing sulfonic azocontaminants of Fe_(1)/OPCN is mainly ascribed to the following aspects:(1)The modified Fe could enhance theadsorption towards sulfonic azo compounds to accelerate the mass transfer,act as e^(-)acceptor to promoteinterfacial charge separation,and trigger the self-Fenton reaction to convert in-situ generated H_(2)O_(2)into·OH.(2)Fe(Ⅲ)could coordinate with-N=N-to form d-πconjugation,which could attract e^(-)transfer to attack-N=N-bond.Meanwhile,the inhibited charge recombination could release more free h^(þ)to oxidize sulfonicacid groups into SO4^(-)·.(3)Under the cooperation of abundant multiple active species(·O_(2)^(-),h^(þ),e^(-),·OH,SO4^(-)·)formed during the degradation reaction,sulfonic azo compounds could be completely mineralized into harmlesssmall molecules(CO_(2),H_(2)O,etc.)by means of-N=N-cleavage,hydroxyl substitution,and aromatic ringopening.This work offers a novel approach for effectively eliminating refractory sulfonic azo compounds fromwastewater.
基金the financial support from the National Natural Science Foundation of China(Nos.62288102 and 62375142)Basic Research Program of Jiangsu(No.BK20243057)+1 种基金Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(No.NY224050)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX25_1187).
文摘Flexible pressure sensors are indispensable components in wearable electronics for health monitoring and exercise management.However,existing pressure sensors face a critical trade-off between high sensitivity and wide detection range.Herein,we present novel flexible pressure sensors based on poly(3,4-ethylenedioxy-thiophene):poly(styrene sulfonate)(PEDOT:PSS)and thermoplastic polyurethane(TPU),fabricated by direct ink writing(DIW)technology with a sacrificial template strategy.The integration of the high conductivity of PEDOT:PSS,the mechanical durability of TPU,and the engineered hierarchical porous structure with irregular surface topography enables the PEDOT:PSS/TPU-based pressure sensors(PPSs)to achieve an exceptionally wide detection range(0-1044 kPa),high sensitivity(30.178 kPa^(−1)),and outstanding cycling stability(over 10,000 cycles).Leveraging these advantages,the sensors have demonstrated exceptional performance in precise physiological monitoring,effective pressure mapping through sensor arrays,and reliable operation in extreme environments(e.g.,cryogenic conditions at−196°C and underwater).Furthermore,the successful integration with LED circuits and wireless Bluetooth systems highlights their potential for next-generation wearable electronics and personalized healthcare monitoring.
文摘The floatability of andalusite and quartz was studied using sodium petroleum sulfonate as collector, being successfully applied in the real ore separation. The collecting performance on minerals was interpreted by means of zeta potential measurement and infrared spectroscopic analysis. The single mineral experiments showed that andalusite got good floatability in acidic pH region while quartz exhibited very poor floatability in the whole pH range. At pH 3, the presence of Fe3+ obviously activated quartz, causing the identical flotation behavior of the two minerals, and calcium lignosulphonate exhibited good selective inhibition to quartz. The real ore test results showed that andalusite concentrate with 53.46% Al2O3 and quartz concentrate with 92.74% SiO2 were obtained. The zeta potential and infrared spectroscopic analysis results indicated that chemical adsorption occurred between sodium petroleum sulfonate and andalusite.
基金This work was supported by the National Natural Science Foundation of China （No.21173002） and the Anhui Provincial Natural Science Foundation, China （No.1308085MB20）.
文摘The photochemical reaction process of anthraquinone-2-sodium sulfonate （AQS） in the mixture of water （H2O） and N-butylpyridinium tetrafluoroborate （[BPy] [BF4]） was studied using the laser flash photolysis technique. Experimental results show that the excited triplet of AQS （3AQS＊） could react rapidly with H2O and the transient absorption spectra greatly changed by increasing the volume fraction of the ionic liquid （VIL） in [BPy][BF4]/H2O mixtures. The absorbance at 510 nm increased gradually with increasing VIL when 0〈VIL〈0.1. By contrast, the absorbance decreased gradually when VIL〉0.1. Otherwise, the absorbance of the band near 380 nm steadily increased. The apparent kinetic parameters of transient species B and ^3AQS＊ are obtained approximately. 3AQS＊ abstracting hydrogen from [BPy]＋ was also explored. It was deduced that the 350-420 nm band was the superposition of the peaks of 3AQS＊ and AQSH＇. The two reactions of 3AQS＊ with [BPy][BF4] and H2O are a pair of competitive reactions. We also concluded that the entire reaction processes slow down in the case of high [BPy] [BF4] concentrations.
文摘Synthesis of p toluidine o sulfonic acid from p toluidine by sulfonation in solvent was studied,and effects of various reaction conditions or factors on the reaction were discussed in detail.As a result,the following optimum process conditions are presented:50 mL dichlorobenzene,2%～5% oleum,molar ratio of sulfonating agent to p toluidine is 1.10～1.12,oleum is dropped in the reaction system in 10 min or so,sulfate formation time is 2 h,distillation lasts 8 h.Under the above conditions,the purity and the yield of p toluidine o sulfonic acid are better than that of the same product made in Japan.
基金financially supported by the State Key Research Development Program of China(No.2016YFC0600708)the Fundamental Research Funds for the Central Universities of China(No.2011QZ02)the Yue Qi Distinguished Scholar Project,China University of Mining&Technology,Beijing
文摘Anionic surfactant sodium dodecyl benzene sulfonate(SDBS)at varying concentrations was selected to investigate the influence on the wettability of Zhaozhuang Coal by molecular dynamics simulation.Six groups of water/surfactant/coal systems with different concentrations were constructed.The influence of surfactant with different concentrations on the wettability of coal was concluded by analyzing various properties from the energetic behaviors to the dynamic characteristics.The results show that the interfacial tension decreases sharply and then rises slowly with the increase of SDBS surfactant concentration,obtaining that surfactants can obviously reduce the interfacial tension.The surfactant molecules could be detected at the water/coal interface through analyzing the system’s relative concentration distribution.In addition,the difference in the wettability of surfactants on coal surfaces is caused by the spatial distribution differences of alkyl chains and the benzene ring of the surfactant molecules.And the negative interaction energy between SDBS and the coal surface indicates that adsorption process is spontaneous.Furthermore,it is of great practical significance for improving the dust reduction effect and reducing the disaster of coal dust by exploring the effects of surfactant molecules on the wettability of coal.
