Unique MoS_(2)‐SnS_(2)heterogeneous nanoplates have successfully in‐situ grown on poly(3‐(1‐vinylimidazolium‐3‐yl)propane‐1‐sulfonate)functionalized polypyrrole/graphene oxide(PVIPS/PPy/GO).PVIPS can attract h...Unique MoS_(2)‐SnS_(2)heterogeneous nanoplates have successfully in‐situ grown on poly(3‐(1‐vinylimidazolium‐3‐yl)propane‐1‐sulfonate)functionalized polypyrrole/graphene oxide(PVIPS/PPy/GO).PVIPS can attract heptamolybdate ion(Mo7O246−)and Sn^(4+)as the precursors by the ion‐exchange,resulting in the simultaneous growth of 1T’‐MoS2 and the berndtite‐2T‐type hexagonal SnS_(2)by the interfacial induced effect of PVIPS.The obtained MoS_(2)‐SnS_(2)/PVIPS/PPy/GO can serve as electrocatalysts,exhibiting good NRR performance by the synergistic effect.The semi‐conducting SnS_(2)would limit the surface electron accessibility for suppressing HER process of 1T’‐MoS_(2),while metallic 1T’‐MoS_(2)might efficiently improve the NRR electroactivity of SnS_(2)by the creation of Mo‐Sn‐Sn trimer catalytic sites.Otherwise,the irreversible crystal phase transition has taken place during the NRR process.Partial 1T’‐MoS_(2)and SnS_(2)have electrochemically reacted with N_(2),and irreversibly converted into Mo^(2)N and SnxNz due to the formation of Mo−N and Sn−N bonding,meanwhile,partial SnS_(2) has been irreversibly evolved into SnS due to the reduction by the power source in the electrochemical system.It would put forward a new design idea for optimizing the preparation method and electrocatalytic activity of transition metal dichalcogenides.展开更多
PPMG-based composite electrolytes were fabricated via the solution method using the polyvinyl alcohol and polyvinylpyrrolidone blend reinforced with various contents of sulfonated inorganic filler.Sulfuric acid was em...PPMG-based composite electrolytes were fabricated via the solution method using the polyvinyl alcohol and polyvinylpyrrolidone blend reinforced with various contents of sulfonated inorganic filler.Sulfuric acid was employed as the sulfonating agent to functionalize the external surface of the inorganic filler,i.e.,graphene oxide.The proton conductivities of the newly prepared proton exchange membranes(PEMs)were increased by increasing the temperature and content of sulfonated graphene oxide(SGO),i.e.,ranging from 0.025 S/cm to 0.060 S/cm.The induction of the optimum level of SGO is determined to be an excellent route to enhance ionic conductivity.The single-cell performance test was conducted by sandwiching the newly prepared PEMs between an anode(0.2 mg/cm^(2) Pt/Ru)and a cathode(0.2 mg/cm^(2) Pt)to prepare membrane electrode assemblies,followed by hot pressing under a pressure of approximately 100 kg/cm^(2) at 60℃for 5–10 min.The highest power densities achieved with PPMG PEMs were 14.9 and 35.60 mW/cm^(2) at 25℃and 70℃,respectively,at ambient pressure with 100%relative humidity.Results showed that the newly prepared PEMs exhibit good electrochemical performance.The results indicated that the prepared composite membrane with 6 wt%filler can be used as an alternative membrane for applications of high-performance proton exchange membrane fuel cell.展开更多
The power conversion effciency(PCE)of flexible perovskite solar cells(PSCs)has increased rapidly,while the mechanical flexibility and environmental stability are still far from satisfactory.Previous studies show the e...The power conversion effciency(PCE)of flexible perovskite solar cells(PSCs)has increased rapidly,while the mechanical flexibility and environmental stability are still far from satisfactory.Previous studies show the environmental degradation and ductile cracks of perovskite films usually begin at the grain boundaries(GBs).Herein,sulfonated graphene oxide(s-GO)is employed to construct a cementitious GBs by interacting with the[Pb I6]4–at GBs.The resultant s-GO-[Pb I6]4–complex can effectively passivate the defects of vacant iodine,and the devices with s-GO exhibit remarkable waterproofness and flexibility due to the tough and water-insoluble GBs.The champion PCE of 20.56%(1.01 cm^(2))in a device treated with s-GO is achieved.This device retains 90%of its original PCE after 180 d stored in the ambient condition,as well as over 80%retention after 10,000 bending cycles at a curvature radius of 3 mm.展开更多
文摘Unique MoS_(2)‐SnS_(2)heterogeneous nanoplates have successfully in‐situ grown on poly(3‐(1‐vinylimidazolium‐3‐yl)propane‐1‐sulfonate)functionalized polypyrrole/graphene oxide(PVIPS/PPy/GO).PVIPS can attract heptamolybdate ion(Mo7O246−)and Sn^(4+)as the precursors by the ion‐exchange,resulting in the simultaneous growth of 1T’‐MoS2 and the berndtite‐2T‐type hexagonal SnS_(2)by the interfacial induced effect of PVIPS.The obtained MoS_(2)‐SnS_(2)/PVIPS/PPy/GO can serve as electrocatalysts,exhibiting good NRR performance by the synergistic effect.The semi‐conducting SnS_(2)would limit the surface electron accessibility for suppressing HER process of 1T’‐MoS_(2),while metallic 1T’‐MoS_(2)might efficiently improve the NRR electroactivity of SnS_(2)by the creation of Mo‐Sn‐Sn trimer catalytic sites.Otherwise,the irreversible crystal phase transition has taken place during the NRR process.Partial 1T’‐MoS_(2)and SnS_(2)have electrochemically reacted with N_(2),and irreversibly converted into Mo^(2)N and SnxNz due to the formation of Mo−N and Sn−N bonding,meanwhile,partial SnS_(2) has been irreversibly evolved into SnS due to the reduction by the power source in the electrochemical system.It would put forward a new design idea for optimizing the preparation method and electrocatalytic activity of transition metal dichalcogenides.
文摘PPMG-based composite electrolytes were fabricated via the solution method using the polyvinyl alcohol and polyvinylpyrrolidone blend reinforced with various contents of sulfonated inorganic filler.Sulfuric acid was employed as the sulfonating agent to functionalize the external surface of the inorganic filler,i.e.,graphene oxide.The proton conductivities of the newly prepared proton exchange membranes(PEMs)were increased by increasing the temperature and content of sulfonated graphene oxide(SGO),i.e.,ranging from 0.025 S/cm to 0.060 S/cm.The induction of the optimum level of SGO is determined to be an excellent route to enhance ionic conductivity.The single-cell performance test was conducted by sandwiching the newly prepared PEMs between an anode(0.2 mg/cm^(2) Pt/Ru)and a cathode(0.2 mg/cm^(2) Pt)to prepare membrane electrode assemblies,followed by hot pressing under a pressure of approximately 100 kg/cm^(2) at 60℃for 5–10 min.The highest power densities achieved with PPMG PEMs were 14.9 and 35.60 mW/cm^(2) at 25℃and 70℃,respectively,at ambient pressure with 100%relative humidity.Results showed that the newly prepared PEMs exhibit good electrochemical performance.The results indicated that the prepared composite membrane with 6 wt%filler can be used as an alternative membrane for applications of high-performance proton exchange membrane fuel cell.
基金support from the National Natural Science Foundation of China(NSFC)(51673091,51833004,and 51425304)NSFC-Guangdong Joint funding(U1801256)+2 种基金support from the National Key R&D Program of China(2018YFA0208501)the National Natural Science Foundation of China(51803217,91963212,51961145102,and 51773206)K.C.Wong Education Foundation。
文摘The power conversion effciency(PCE)of flexible perovskite solar cells(PSCs)has increased rapidly,while the mechanical flexibility and environmental stability are still far from satisfactory.Previous studies show the environmental degradation and ductile cracks of perovskite films usually begin at the grain boundaries(GBs).Herein,sulfonated graphene oxide(s-GO)is employed to construct a cementitious GBs by interacting with the[Pb I6]4–at GBs.The resultant s-GO-[Pb I6]4–complex can effectively passivate the defects of vacant iodine,and the devices with s-GO exhibit remarkable waterproofness and flexibility due to the tough and water-insoluble GBs.The champion PCE of 20.56%(1.01 cm^(2))in a device treated with s-GO is achieved.This device retains 90%of its original PCE after 180 d stored in the ambient condition,as well as over 80%retention after 10,000 bending cycles at a curvature radius of 3 mm.
