To remove the fluoride in zinc sulfate electrolyte to an appropriate level,mitigate environmental fluoride pollution,and drive the development of the hydrometallurgy industry of zinc,a novel Fe_(3)O_(4)@SiO_(2)@Fe-MIL...To remove the fluoride in zinc sulfate electrolyte to an appropriate level,mitigate environmental fluoride pollution,and drive the development of the hydrometallurgy industry of zinc,a novel Fe_(3)O_(4)@SiO_(2)@Fe-MIL-101 magnetic composite material was successfully synthesized via the one-pot method.Preparation conditions were optimized and structural characterization of this material conducted using FTIR,SEM,EDS,XRD and Hysteresis analysis.The results show that this composite exhibits a more rapid fluoride adsorption dynamics and a higher fluoride adsorption capacity(18.34 mg/g)and its adsorption behavior fitted for the first order dynamic model and the Freundlich isotherm model.The adsorption of fluorine by this composite is mainly physical adsorption according to the mean adsorption energy(1.216 kJ/mol).The interfering ions co-existed in fluoride-containing solutions,like HCO_(3)^(-),NO^(-)and Cl^(-),have a significant effect on fluorine adsorption.This composite has also been proved with magnetism,higher adsorption selectivity and satisfactory reusability.When this composite is employed as an adsorbent for adsorption removing fluoride in zinc sulfate electrolyte,it exhibits higher pH-dependent behavior as well as high fluoride removal efficiency at pH 6.5.展开更多
SP-C was applied for the removal of Cu^2＋ from simulated cobalt sulfate electrolyte containing Co2＋ 50 g/L and Cu2＋ 0.5-2.0 g/L. Experimental conditions included pH of 2-4, temperature of 20-60℃ and contact time o...SP-C was applied for the removal of Cu^2＋ from simulated cobalt sulfate electrolyte containing Co2＋ 50 g/L and Cu2＋ 0.5-2.0 g/L. Experimental conditions included pH of 2-4, temperature of 20-60℃ and contact time of 10-40 min. The investigation demonstrated that SP-C had recommendable efficiency in adsorbing Cu2＋ from the electrolyte with 25- to 100-fold of Co2＋ The optimal adsorption conditions of SP-C were pH of 4, contact time of 30 min and ambient temperature. The study also showed that the loaded resin could be effectively eluted with 2.0 mol/L H2SO4 solution at a contact time of 40 min; the peak concentration of Cu2＋ in the eluate was about 35 g/L. The sorption characteristics of Cu2＋ by SP-C could be described by Langrnuir isotherm and the pseudo second-order kinetic equation. Infrared spectra showed that nitrogen atoms in the functional group coordinated with Cu2＋ to form coordination bands.展开更多
基金National Natural Science Foundation of China(21865011)2024 Innovation and Entrepreneurship Project of College Student in Jishou University(JDCX20241122)。
文摘To remove the fluoride in zinc sulfate electrolyte to an appropriate level,mitigate environmental fluoride pollution,and drive the development of the hydrometallurgy industry of zinc,a novel Fe_(3)O_(4)@SiO_(2)@Fe-MIL-101 magnetic composite material was successfully synthesized via the one-pot method.Preparation conditions were optimized and structural characterization of this material conducted using FTIR,SEM,EDS,XRD and Hysteresis analysis.The results show that this composite exhibits a more rapid fluoride adsorption dynamics and a higher fluoride adsorption capacity(18.34 mg/g)and its adsorption behavior fitted for the first order dynamic model and the Freundlich isotherm model.The adsorption of fluorine by this composite is mainly physical adsorption according to the mean adsorption energy(1.216 kJ/mol).The interfering ions co-existed in fluoride-containing solutions,like HCO_(3)^(-),NO^(-)and Cl^(-),have a significant effect on fluorine adsorption.This composite has also been proved with magnetism,higher adsorption selectivity and satisfactory reusability.When this composite is employed as an adsorbent for adsorption removing fluoride in zinc sulfate electrolyte,it exhibits higher pH-dependent behavior as well as high fluoride removal efficiency at pH 6.5.
文摘SP-C was applied for the removal of Cu^2＋ from simulated cobalt sulfate electrolyte containing Co2＋ 50 g/L and Cu2＋ 0.5-2.0 g/L. Experimental conditions included pH of 2-4, temperature of 20-60℃ and contact time of 10-40 min. The investigation demonstrated that SP-C had recommendable efficiency in adsorbing Cu2＋ from the electrolyte with 25- to 100-fold of Co2＋ The optimal adsorption conditions of SP-C were pH of 4, contact time of 30 min and ambient temperature. The study also showed that the loaded resin could be effectively eluted with 2.0 mol/L H2SO4 solution at a contact time of 40 min; the peak concentration of Cu2＋ in the eluate was about 35 g/L. The sorption characteristics of Cu2＋ by SP-C could be described by Langrnuir isotherm and the pseudo second-order kinetic equation. Infrared spectra showed that nitrogen atoms in the functional group coordinated with Cu2＋ to form coordination bands.
