Osteochondral allografting has been proved to be a useful method to treat diseased or damaged areas of joint surfaces. Operational long-term stocks of grafts which supply a buffer between procurement and utilization w...Osteochondral allografting has been proved to be a useful method to treat diseased or damaged areas of joint surfaces. Operational long-term stocks of grafts which supply a buffer between procurement and utilization would contribute to the commercialization or industrialization of this technology. Vitrification has been thought to be a promising method for successful preservation of articular cartilage （AC）, but high concentration cryoprotectants （CPAs） are used which may cause high cellular toxicity. An effective way to reduce CPA toxioity is to increase CPA concen- tration gradually while the temperature is lowered. Understanding the mechanism of （31~A permeation at subzero temperatures is important for designing the cryopreservation protocol. In this research, the permeation of dimethyl sulfoxide （MezSO） in ovine AC at subzero temperatures was studied experimentally. Pretreated AC discs were ex- posed in Me2SO solutions for different time （0, 5, 15, 30, 50, 80, and 120 min） at three temperature levels （-10, -20, and -30℃）. The Me2SO concentration within the tissue was determined by ultraviolet （UV） spectrophotometry. The diffusion coefficients were estimated to be 0.85×10-6, 0.48×10-8, and 0.27×10-6 cm2/s at -10, -20, and -,30℃, respectively, and the corresponding activation energy was 29.23 kJ/mol. Numerical simulation was performed to com- pare two Me2SO addition protocols, and the results demonstrated that the total loading duration could be effectively reduced with the knowledge of permeation kinetics.展开更多
Layered Ni-rich cathode materials,LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),are synthesized via solid reaction assisted with a plasma milling pretreatment,which is resulted in lowering sintering temperatures for solid p...Layered Ni-rich cathode materials,LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),are synthesized via solid reaction assisted with a plasma milling pretreatment,which is resulted in lowering sintering temperatures for solid precursors.The plasma milling pretreated NCM622 cathode material sintered at 780℃(named as PM-780)demonstrates good cycling stability at both room and subzero temperatures.Specifically,the PM-780 cathode delivers an initial discharge capacity of 171.2 mAh g^(-1) and a high capacity retention of 99.7%after 300 cycles with current rate of 90 mA g^(-1) at 30℃,while stable capacities of 120.3 and 94.0 m Ah g^(-1) can be remained at-10℃and-20℃in propylene carbonate contained electrolyte,respectively.In-situ XRD together with XPS and SEM reveal that the NCM622 cycled at-10℃presented better structural stability and more intact interface than that of cathodes cycled at 30℃.It is also found that subzero temperatures only limit the discharge potential of NCM622 without destroying its structure during cycling since it still exhibits high discharge capacity at 30℃after cycled at subzero temperatures.This work may expand the knowledge about the low-temperature characteristics of layered cathode materials for Li-ion batteries and lay the foundation for its further applications.展开更多
Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)have attracted considerable attention as solid-state electrolytes owing to their high ionic conductivities similar to those of liquid electrolytes,ex...Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)have attracted considerable attention as solid-state electrolytes owing to their high ionic conductivities similar to those of liquid electrolytes,excellent contacts with the electrodes,and good mechanic properties.As a crucial property of a solid-state electrolyte,the ionic conductivity of the PPCE directly depends on the interactions between the constituent parts including the polymer,lithium salt,and SN.A few studies have focused on the effects of polymer–lithium–salt and polymer–SN interactions on the PPCE ionic conductivity.Nevertheless,the impact of the lithium–salt–SN combination on the PPCE ionic conductivity has not been analyzed.In particular,tuning of the lithium-salt–SN interaction to fabricate a subzero PPCE with a high low-temperature ionic conductivity has not been reported.In this study,we design and fabricate five PPCE membranes with different weight ratios of Li N(SO2 CF3)2(Li TFSI)and SN to investigate the effect of the Li TFSI–SN interaction on the PPCE ionic conductivity.The ionic conductivities of the five PPCEs are investigated in the temperature range of–20 to 60°C by electro-chemical impedance spectroscopy.The interaction is analyzed by Fourier-transform infrared spectroscopy,Raman spectroscopy,and differential scanning calorimetry.The Li TFSI–SN interaction significantly influences the melting point of the PPCE,dissociation of the Li TFSI salt,and thus the PPCE ionic conductivity.By tuning the Li TFSI–SN interaction,a subzero workable PPCE membrane having an excellent low-temperature ionic conductivity(6×10-4 S cm–1 at 0°C)is obtained.The electro-chemical performance of the optimal PPCE is evaluated by using a Li Co O2/PPCE/Li4 Ti5 O12 cell,which confirms the application feasibility of the proposed quasisolid-state electrolyte in subzero workable lithium-ion batteries.展开更多
The compressive strength,hydration products and microstructure of concrete with calcium-enriched fly ash(CEFA) at different temperature were investigated.The result indicates that the hydration products age of 7 d at-...The compressive strength,hydration products and microstructure of concrete with calcium-enriched fly ash(CEFA) at different temperature were investigated.The result indicates that the hydration products age of 7 d at-15 ℃ are mainly ettringite and C-S-H,and fly ash particles remain original state.Standard curing was adapted after 7 d curing at-15 ℃.At the age of 35 d,C-S-H was found on the surface of fly ash particles.The hydration product of CEFA is mainly C-S-H gel,which can densify the microstructure of concrete.展开更多
The effect of subzero treatment on the microstructure and mechanical properites of Y_2O_3- ZrO_2 ceramic have been investigated by TEM,X-ray diffraction and test of mechanical properties.It was shown that the microstr...The effect of subzero treatment on the microstructure and mechanical properites of Y_2O_3- ZrO_2 ceramic have been investigated by TEM,X-ray diffraction and test of mechanical properties.It was shown that the microstructre of 3Y-PSZ after subzero treatment by liquid nitrogen exhibits very long and parallel laths of m-phase and some microcracks around the larger and finer lath of m-phase may be discovered.Suitable subzero treatment can improve the strength and toughness of Y-PSZ efficiently because of decreasing the stability of t-phase and incresing the amount of t-m transformation when exerting a stress.However,when the time of subzero treatment exceeds,the over aging effect may arise.which can decrease the strength and toughness of the material.展开更多
Artificial muscle fibers driven electrothermally with excellent properties of response,stroke,and work capacity are expected to serve in some intelligent structures and systems.However,muscle fibers that operate in su...Artificial muscle fibers driven electrothermally with excellent properties of response,stroke,and work capacity are expected to serve in some intelligent structures and systems.However,muscle fibers that operate in subzero environments are highly needed in industrial production and aerospace applications but remain challenging.Herein,we reported a coaxial artificial muscle fiber by electrospinning a sheath of polycaprolactone(PCL)nanofibers on the surface of a carbon nanotube(CNT)fiber core,achieving the actuation in response to thermal at subzero temperatures.The CNT@PCL coaxial muscle fiber under 0.3 MPa achieved a maximum contractile stroke of~18%as the temperature changed from−130℃ to 45℃.The actuation mechanism at subzero temperatures of this muscle fiber was analyzed in combination with the temperature-deformation schematic curve of different polymers.Furthermore,a temperature sensor based on this muscle fiber was developed,due to the excellent linear relationship between the contraction and temperature.A 3D-printed prosthetic arm was designed to further exhibit the application demonstrations of this muscle fiber in subzero environments.This work provides new insights into artificial muscle fibers for serving in extreme environments with ultralow temperatures.展开更多
基金supported by the National Natural Science Foundation of China (No. 50606032)the Graduate Innovation Research Program of Zhejiang Province (No. YK2008020), China
文摘Osteochondral allografting has been proved to be a useful method to treat diseased or damaged areas of joint surfaces. Operational long-term stocks of grafts which supply a buffer between procurement and utilization would contribute to the commercialization or industrialization of this technology. Vitrification has been thought to be a promising method for successful preservation of articular cartilage （AC）, but high concentration cryoprotectants （CPAs） are used which may cause high cellular toxicity. An effective way to reduce CPA toxioity is to increase CPA concen- tration gradually while the temperature is lowered. Understanding the mechanism of （31~A permeation at subzero temperatures is important for designing the cryopreservation protocol. In this research, the permeation of dimethyl sulfoxide （MezSO） in ovine AC at subzero temperatures was studied experimentally. Pretreated AC discs were ex- posed in Me2SO solutions for different time （0, 5, 15, 30, 50, 80, and 120 min） at three temperature levels （-10, -20, and -30℃）. The Me2SO concentration within the tissue was determined by ultraviolet （UV） spectrophotometry. The diffusion coefficients were estimated to be 0.85×10-6, 0.48×10-8, and 0.27×10-6 cm2/s at -10, -20, and -,30℃, respectively, and the corresponding activation energy was 29.23 kJ/mol. Numerical simulation was performed to com- pare two Me2SO addition protocols, and the results demonstrated that the total loading duration could be effectively reduced with the knowledge of permeation kinetics.
基金supported by the National Natural Science Foundation of China(No.51671088,51621001,51822104 and 51831009)the Guangzhou Science and Technology Plan Projects(No.201904020018)the Fundamental Research Funds for the Central Universities in South China University of Technology(No.2019CG24)。
文摘Layered Ni-rich cathode materials,LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),are synthesized via solid reaction assisted with a plasma milling pretreatment,which is resulted in lowering sintering temperatures for solid precursors.The plasma milling pretreated NCM622 cathode material sintered at 780℃(named as PM-780)demonstrates good cycling stability at both room and subzero temperatures.Specifically,the PM-780 cathode delivers an initial discharge capacity of 171.2 mAh g^(-1) and a high capacity retention of 99.7%after 300 cycles with current rate of 90 mA g^(-1) at 30℃,while stable capacities of 120.3 and 94.0 m Ah g^(-1) can be remained at-10℃and-20℃in propylene carbonate contained electrolyte,respectively.In-situ XRD together with XPS and SEM reveal that the NCM622 cycled at-10℃presented better structural stability and more intact interface than that of cathodes cycled at 30℃.It is also found that subzero temperatures only limit the discharge potential of NCM622 without destroying its structure during cycling since it still exhibits high discharge capacity at 30℃after cycled at subzero temperatures.This work may expand the knowledge about the low-temperature characteristics of layered cathode materials for Li-ion batteries and lay the foundation for its further applications.
基金financially supported by the National Natural Science Foundation of China[grant numbers:21503265,51603135,21473241]Ministry of Science and Technology[grant number:2016YFB0100102]Nantong Science and Technology Bureau[grant number:JC2018038]。
文摘Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)have attracted considerable attention as solid-state electrolytes owing to their high ionic conductivities similar to those of liquid electrolytes,excellent contacts with the electrodes,and good mechanic properties.As a crucial property of a solid-state electrolyte,the ionic conductivity of the PPCE directly depends on the interactions between the constituent parts including the polymer,lithium salt,and SN.A few studies have focused on the effects of polymer–lithium–salt and polymer–SN interactions on the PPCE ionic conductivity.Nevertheless,the impact of the lithium–salt–SN combination on the PPCE ionic conductivity has not been analyzed.In particular,tuning of the lithium-salt–SN interaction to fabricate a subzero PPCE with a high low-temperature ionic conductivity has not been reported.In this study,we design and fabricate five PPCE membranes with different weight ratios of Li N(SO2 CF3)2(Li TFSI)and SN to investigate the effect of the Li TFSI–SN interaction on the PPCE ionic conductivity.The ionic conductivities of the five PPCEs are investigated in the temperature range of–20 to 60°C by electro-chemical impedance spectroscopy.The interaction is analyzed by Fourier-transform infrared spectroscopy,Raman spectroscopy,and differential scanning calorimetry.The Li TFSI–SN interaction significantly influences the melting point of the PPCE,dissociation of the Li TFSI salt,and thus the PPCE ionic conductivity.By tuning the Li TFSI–SN interaction,a subzero workable PPCE membrane having an excellent low-temperature ionic conductivity(6×10-4 S cm–1 at 0°C)is obtained.The electro-chemical performance of the optimal PPCE is evaluated by using a Li Co O2/PPCE/Li4 Ti5 O12 cell,which confirms the application feasibility of the proposed quasisolid-state electrolyte in subzero workable lithium-ion batteries.
文摘The compressive strength,hydration products and microstructure of concrete with calcium-enriched fly ash(CEFA) at different temperature were investigated.The result indicates that the hydration products age of 7 d at-15 ℃ are mainly ettringite and C-S-H,and fly ash particles remain original state.Standard curing was adapted after 7 d curing at-15 ℃.At the age of 35 d,C-S-H was found on the surface of fly ash particles.The hydration product of CEFA is mainly C-S-H gel,which can densify the microstructure of concrete.
文摘The effect of subzero treatment on the microstructure and mechanical properites of Y_2O_3- ZrO_2 ceramic have been investigated by TEM,X-ray diffraction and test of mechanical properties.It was shown that the microstructre of 3Y-PSZ after subzero treatment by liquid nitrogen exhibits very long and parallel laths of m-phase and some microcracks around the larger and finer lath of m-phase may be discovered.Suitable subzero treatment can improve the strength and toughness of Y-PSZ efficiently because of decreasing the stability of t-phase and incresing the amount of t-m transformation when exerting a stress.However,when the time of subzero treatment exceeds,the over aging effect may arise.which can decrease the strength and toughness of the material.
基金The authors acknowledge the financial support obtained from Key Research Project of Zhejiang lab(No.K2022NB0AC04)the National Key Research and Development Program of China(2020YFB1312900)+1 种基金the National Natural Science Foundation of China(21975281)Jiangxi Double Thousand Talent Program(No.jxsq2020101008)。
文摘Artificial muscle fibers driven electrothermally with excellent properties of response,stroke,and work capacity are expected to serve in some intelligent structures and systems.However,muscle fibers that operate in subzero environments are highly needed in industrial production and aerospace applications but remain challenging.Herein,we reported a coaxial artificial muscle fiber by electrospinning a sheath of polycaprolactone(PCL)nanofibers on the surface of a carbon nanotube(CNT)fiber core,achieving the actuation in response to thermal at subzero temperatures.The CNT@PCL coaxial muscle fiber under 0.3 MPa achieved a maximum contractile stroke of~18%as the temperature changed from−130℃ to 45℃.The actuation mechanism at subzero temperatures of this muscle fiber was analyzed in combination with the temperature-deformation schematic curve of different polymers.Furthermore,a temperature sensor based on this muscle fiber was developed,due to the excellent linear relationship between the contraction and temperature.A 3D-printed prosthetic arm was designed to further exhibit the application demonstrations of this muscle fiber in subzero environments.This work provides new insights into artificial muscle fibers for serving in extreme environments with ultralow temperatures.
