This paper presents a new computational method for forward uncertainty quantification(UQ)analyses on large-scale structural systems in the presence of arbitrary and dependent random inputs.The method consists of a gen...This paper presents a new computational method for forward uncertainty quantification(UQ)analyses on large-scale structural systems in the presence of arbitrary and dependent random inputs.The method consists of a generalized polynomial chaos expansion(GPCE)for statistical moment and reliability analyses associated with the stochastic output and a static reanalysis method to generate the input-output data set.In the reanalysis,we employ substructuring for a structure to isolate its local regions that vary due to random inputs.This allows for avoiding repeated computations of invariant substructures while generating the input-output data set.Combining substructuring with static condensation further improves the computational efficiency of the reanalysis without losing accuracy.Consequently,the GPCE with the static reanalysis method can achieve significant computational saving,thus mitigating the curse of dimensionality to some degree for UQ under high-dimensional inputs.The numerical results obtained from a simple structure indicate that the proposed method for UQ produces accurate solutions more efficiently than the GPCE using full finite element analyses(FEAs).We also demonstrate the efficiency and scalability of the proposed method by executing UQ for a large-scale wing-box structure under ten-dimensional(all-dependent)random inputs.展开更多
Mechanical assembly has its own dynamic quality directly affecting the dynamic quality of whole product and should be considered in quality inspection and estimation of mechanical assembly. Based on functional relatio...Mechanical assembly has its own dynamic quality directly affecting the dynamic quality of whole product and should be considered in quality inspection and estimation of mechanical assembly. Based on functional relations between dynamic characteristics involved in mechanical assembly, the effects of assembling process on dynamic characteristics of substructural components of an assembly system are investigated by substructuring analysis. Assembly-coupling dynamic stiffness is clarified as the dominant factor of the effects and can be used as a quantitative measure of assembly dynamic quality. Two computational schemes using frequency response functions（FRFs） to determine the stiffness are provided and discussed by inverse substructuring analysis, including their applicable conditions and implementation procedure in application. Eigenvalue analysis on matrix-ratios of FRFs before and after assembling is employed and well validates the analytical outcomes and the schemes via both a lumped-parameter model and its analogic experimental counterpart. Applying the two schemes to inspect the dynamic quality provides the message of dynamic performance of the assembly system, and therefore improves conventional quality inspection and estimation of mechanical assembly in completeness.展开更多
The paper deals with the dynamic response prediction of the composite structure,which consists of two linear components coupled by some nonlinear vibration isolators. Based on the measured impulse response functions o...The paper deals with the dynamic response prediction of the composite structure,which consists of two linear components coupled by some nonlinear vibration isolators. Based on the measured impulse response functions of the linear components, three kinds of dynamic equations of interfacial integration are proposed and a procedure to transform the dynamic equations of integral type into a set of ordinary differential equations is suggested. Computer simulations and a real test are given to verify the effectiveness of the theoretical results.展开更多
A low frequency dynamic environment prediction of spacecraft using dynamic substructu- ring is presented. The dynamic environment could be used to describe the level of the excitation on the spacecraft itself and auxi...A low frequency dynamic environment prediction of spacecraft using dynamic substructu- ring is presented. The dynamic environment could be used to describe the level of the excitation on the spacecraft itself and auxiliary equipment. In addition, the dynamic environment is a criterion for the structural dynamic design as well as the ground verification test. The proposed prediction method could solve two major problems. The first is the time consumption of analyzing the whole spacecraft model due to the huge amount of degrees of freedom, and the second is multi-source for component structural dynamic models from distributive departments. To demonstrate the feasibility and efficien- cy, the proposed prediction method is applied to resolve a launching satellite case, and the results were compared with those obtained by the traditional prediction technology using the finite element method.展开更多
In this paper, the substructuring technique is extended for the dynamics simulation of flexible beams with large deformation. The dynamics equation of a spatial straight beam undergoing large displacement and small de...In this paper, the substructuring technique is extended for the dynamics simulation of flexible beams with large deformation. The dynamics equation of a spatial straight beam undergoing large displacement and small deformation is deduced by using the Jourdain variation principle and the model synthesis method. The longitudinal shortening effect due to the transversal deformation is taken into consideration in the dynamics equation. In this way, the geometric stiffening effect, which is also called stress stiffening effect, is accounted for in the dynamics equation. The transfer equation of the flexible beam is obtained by assembling the dynamics equation and the kinematic relationship between the two connection points of the flexible beam. Treating a flexible beam with small deformation as a substructure, one can solve the dynamics of a flexible beam with large deformation by using the substructuring technique and the transfer matrix method. The dynamics simulation of a flexible beam with large deformation is carried out by using the proposed approach and the results are verified by comparing with those obtained from Abaqus software.展开更多
Conical origami structures are characterized by their substantial out-of-plane stiffness and energy-absorptioncapacity.Previous investigations have commonly focused on the static characteristics of these lightweight s...Conical origami structures are characterized by their substantial out-of-plane stiffness and energy-absorptioncapacity.Previous investigations have commonly focused on the static characteristics of these lightweight struc-tures.However,the efficient analysis of the natural vibrations of these structures is pivotal for designing conicalorigami structures with programmable stiffness and mass.In this paper,we propose a novel method to analyzethe natural vibrations of such structures by combining a symmetric substructuring method(SSM)and a gener-alized eigenvalue analysis.SSM exploits the inherent symmetry of the structure to decompose it into a finiteset of repetitive substructures.In doing so,we reduce the dimensions of matrices and improve computationalefficiency by adopting the stiffness and mass matrices of the substructures in the generalized eigenvalue analysis.Finite element simulations of pin-jointed models are used to validate the computational results of the proposedapproach.Moreover,the parametric analysis of the structures demonstrates the influences of the number of seg-ments along the circumference and the radius of the cone on the structural mass and natural frequencies of thestructures.Furthermore,we present a comparison between six-fold and four-fold conical origami structures anddiscuss the influence of various geometric parameters on their natural frequencies.This study provides a strategyfor efficiently analyzing the natural vibration of symmetric origami structures and has the potential to contributeto the efficient design and customization of origami metastructures with programmable stiffness.展开更多
A data-driven model ofmultiple variable cutting(M-VCUT)level set-based substructure is proposed for the topology optimization of lattice structures.TheM-VCUTlevel setmethod is used to represent substructures,enriching...A data-driven model ofmultiple variable cutting(M-VCUT)level set-based substructure is proposed for the topology optimization of lattice structures.TheM-VCUTlevel setmethod is used to represent substructures,enriching their diversity of configuration while ensuring connectivity.To construct the data-driven model of substructure,a database is prepared by sampling the space of substructures spanned by several substructure prototypes.Then,for each substructure in this database,the stiffness matrix is condensed so that its degrees of freedomare reduced.Thereafter,the data-drivenmodel of substructures is constructed through interpolationwith compactly supported radial basis function(CS-RBF).The inputs of the data-driven model are the design variables of topology optimization,and the outputs are the condensed stiffness matrix and volume of substructures.During the optimization,this data-driven model is used,thus avoiding repeated static condensation that would requiremuch computation time.Several numerical examples are provided to verify the proposed method.展开更多
The spray-deposition was used to produce billets of Mg-4Al-1.5Zn-3Ca-1Nd(A alloy)and Mg-13Al-3Zn-3Ca-1Nd(B alloy),and evolution of deformation substructure and Mg_(x)Zn_(y)Ca_(z)metastable phase in fine-grained(3μm)M...The spray-deposition was used to produce billets of Mg-4Al-1.5Zn-3Ca-1Nd(A alloy)and Mg-13Al-3Zn-3Ca-1Nd(B alloy),and evolution of deformation substructure and Mg_(x)Zn_(y)Ca_(z)metastable phase in fine-grained(3μm)Mg alloys was investigated by scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray diffraction(XRD),and electron backscattered diffraction(EBSD).It was found that different dislocation configurations were formed in A and B alloys.Redundant free dislocations(RFDs)and dislocation tangles were the ways to form deformation substructure in A alloy,no RFDs except dislocation tangles were found in B alloy.The interaction between nano-scale second phase particles(nano-scale C15 andβ-Mg_(17)(Al,Zn)_(12)phase)and different dislocation configurations had a significant effect on the deformation substructures formation.The mass transfer of Mg_(x)Zn_(y)Ca_(z)metastable phases and the stacking order of stacking faults were conducive to the Mg-Nd-Zn typed long period stacking ordered(LPSO)phases formation.Nano-scale C15 phases,Mg-Nd-Zn typed LPSO phases,c/a ratio,β-Mg_(17)(Al,Zn)_(12)phases were the key factors influencing the formation of textures.Different textures and grain boundary features(GB features)had a significant effect on k-value.The non-basal textures were the main factor affecting k-value in A alloy,while the high-angle grain boundary(HAGB)was the main factor affecting k-value in B alloy.展开更多
Facing the high demand for faster and heavier freight trains in Australia,researchers and practitioners are endeavouring to develop more innovative and resilient ballasted tracks.In recent years,many studies have been...Facing the high demand for faster and heavier freight trains in Australia,researchers and practitioners are endeavouring to develop more innovative and resilient ballasted tracks.In recent years,many studies have been conducted by the researchers from Transport Research Centre at the University of Technology Sydney(TRC-UTS)to examine the feasibility of incorporating recycled tyre/rubber into rail tracks.This paper reviews three innovative applications using recycled rubber products such as(1)a synthetic energy-absorbing layer for railway subballast using a composite of rubber crumbs and mining byproducts,(2)using rubber intermixed ballast stratum to replace conventional ballast,and(3)installing recycled rubber mat to mitigate ballast degradation under the impact loading.Comprehensive laboratory and field tests as well as numerical modelling have been conducted to examine the performance of rail tracks incorporating these innovative inclusions.The laboratory and field test results and numerical modelling reveal that incorporating these rubber products could increase the energy-absorbing capacity of the track,and mitigate the ballast breakage and settlement significantly,hence increasing the track stability.The research outcomes will facilitate a better understanding of the performance of ballast tracks incorporating these resilient waste tyre materials while promoting more economical and environmentally sustainable tracks for greater passenger comfort and increased safety.展开更多
Ti-Zr-Nb refractory multi-principal element alloys(RMPEAs)have attracted increased attention due to their excellent mechanical properties.In this study,(TiZr)_(80-x)Nb_(20)Mo_(x)(x=0,5 and 10)alloys were designed,and ...Ti-Zr-Nb refractory multi-principal element alloys(RMPEAs)have attracted increased attention due to their excellent mechanical properties.In this study,(TiZr)_(80-x)Nb_(20)Mo_(x)(x=0,5 and 10)alloys were designed,and the intrinsic conflicts between strength and ductility were overcome via composition optimization and recrystallization.The causes of the superior strength-ductility synergy were investigated in terms of their deformation mechanism and dislocation behavior.The results show that the strength improvement can be attributed to the deformation mechanism transition caused by local chemical fluctuations and lattice distortion.Specifically,the slip band widths decrease after Mo addition,and the measured slip traces in the fracture samples are associated with high-order{112}and{123}slip planes.Furthermore,the grain refinement achieved via recrystallization promotes multi-slip system activation and shortens the slip-band spacing,which reduces the stress concentration and inhibits crack source formation,thereby allowing the alloy to ensure sufficient ductility.Consequently,the Ti_(35)Zr_(35)Nb_(20)Mo_(10)alloy annealed at 900℃ exhibits high yield strength and elongation.These findings provide a new strategy for designing high-strength RMPEAs and addressing room-temperature brittleness.展开更多
Considering the pivotal role of single-wavelength anomalous diffraction(SAD) in macromolecular crystallography,our objective was to introduce DSAS,a novel program designed for efficient anomalous scattering substructu...Considering the pivotal role of single-wavelength anomalous diffraction(SAD) in macromolecular crystallography,our objective was to introduce DSAS,a novel program designed for efficient anomalous scattering substructure determination.DSAS stands out with its core components:a modified phase-retrieval algorithm and automated parameter tuning.The software boasts an intuitive graphical user interface(GUI),facilitating seamless input of essential data and real-time monitoring.Extensive testing on DSAS has involved diverse datasets,encompassing proteins,nucleic acids,and various anomalous scatters such as sulfur(S),selenium(Se),metals,and halogens.The results confirm DSAS’s exceptional performance in accurately determining heavy atom positions,making it a highly effective tool in the field.展开更多
For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study prop...For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study proposes to investigate the stability and accuracy of the central difference method(CDM)for RTDST considering the specimen mass participation coefficient.First,the theory of the CDM for RTDST is presented.Next,the stability and accuracy of the CDM for RTDST considering the specimen mass participation coefficient are investigated.Finally,numerical simulations and experimental tests are conducted for verifying the effectiveness of the method.The study indicates that the stability of the algorithm is affected by the mass participation coefficient of the specimen,and the stability limit first increases and then decreases as the mass participation coefficient increases.In most cases,the mass participation coefficient will increase the stability limit of the algorithm,but in specific circumstances,the algorithm may lose its stability.The stability and accuracy of the CDM considering the mass participation coefficient are verified by numerical simulations and experimental tests on a three-story frame structure with a tuned liquid damper.展开更多
The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys （x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%）, produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and agin...The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys （x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%）, produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and aging treatment. The effects of minor Sc and Zr addition on microstructure, recrystallization and properties of alloys were studied by optical microscopy （OM）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results show that Sc and Zr addition can refine grains of the as-cast alloy by precipitation of primary Al3（Sc,Zr） particles formed during solidification as heterogeneous nuclei. Secondary Al3（Sc,Zr） precipitates formed during homogenization treatment strongly pin the movement of dislocation and subgrain boundaries, which can effectively inhibit the alloys recrystallization. Compared with the alloy without Sc and Zr addition, the Al-Zn-Mg-Cu-Zr alloy with 0.05%Sc and 0.15%Zr shows the increase in tensile strength and yield strength by 172 MPa and 218 MPa, respectively. Strengthening comes from the contributions of precipitation, substructure and grain refining.展开更多
In order to decrease model complexity of rice panicle for its complicated morphological structure,an interactive L-system based on substructure algorithm was proposed to model rice panicle in this study.Through the an...In order to decrease model complexity of rice panicle for its complicated morphological structure,an interactive L-system based on substructure algorithm was proposed to model rice panicle in this study.Through the analysis of panicle morphology,the geometrical structure models of panicle spikelet,axis and branch were constructed firstly.Based on that,an interactive panicle L-system model was developed by using substructure algorithm to optimize panicle geometrical models with the similar structure.Simulation results showed that the interactive L-system panicle model based on substructure algorithm could fast construct panicle morphological structure in reality.In addition,this method had the well reference value for other plants model research.展开更多
The wave-shaped space truss is used as the roof of the natatorium in Tianjin University,which ingeniously displays the function of the building.In this paper,the wave-shaped space truss is analyzed and designed,consid...The wave-shaped space truss is used as the roof of the natatorium in Tianjin University,which ingeniously displays the function of the building.In this paper,the wave-shaped space truss is analyzed and designed,considering the substructure made of reinforced concrete rigid frame and the space truss working together.Also,the anti-seismic characteristic of the wave-shaped space truss is studied based on the integral model.展开更多
The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident...The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident wave into equivalent loads on the cutoff boundaries. The wave method has high precision, but the implementation is complicated, especially for three-dimensional models. By deducing another form of equivalent input seismic loads in the fi nite element model, a new seismic wave input method is proposed. In the new method, by imposing the displacements of the free wave fi eld on the nodes of the substructure composed of elements that contain artifi cial boundaries, the equivalent input seismic loads are obtained through dynamic analysis of the substructure. Subsequently, the equivalent input seismic loads are imposed on the artifi cial boundary nodes to complete the seismic wave input and perform seismic analysis of the soil-structure dynamic interaction model. Compared with the wave method, the new method is simplifi ed by avoiding the complex processes of calculating the equivalent input seismic loads. The validity of the new method is verifi ed by the dynamic analysis numerical examples of the homogeneous and layered half space under vertical and oblique incident seismic waves.展开更多
The morphology,microstructure and decomposition behavior of M2C carbides in high speed steels with different chemical compositions have been investigated by scanning electron microscopy,transmission electron microscop...The morphology,microstructure and decomposition behavior of M2C carbides in high speed steels with different chemical compositions have been investigated by scanning electron microscopy,transmission electron microscopy,electron backscatter diffraction and X-ray diffraction.The results show that the morphology and substructure of M2C carbides are very sensitive to chemical compositions of high speed steels.M2C carbides present the plate-like shape in tungsten-molybdenum steel and present the polycrystal orientation in the eutectic cell.In contrast,they show the fibrous shape in molybdenum-base steel and exhibit the monocrystal orientation.Plate-like and fibrous M2C carbides are both metastable and decompose into M6 C together with MC at high temperatures.MC nucleates inside the plate-like M2C while it is formed at the fibrous M2C/matrix interface during the decomposition process.Such differences are expected to arise from different compositions of plate-like and fibrous M2C carbides.展开更多
In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment metho...In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.展开更多
As a newly invented parallel kinematic machine（PKM）, Exechon has found its potential application in machining and assembling industries due to high rigidity and high dynamics. To guarantee the overall performance, t...As a newly invented parallel kinematic machine（PKM）, Exechon has found its potential application in machining and assembling industries due to high rigidity and high dynamics. To guarantee the overall performance, the loading conditions and deflections of the key components must be revealed to provide basic mechanic data for component design. For this purpose, a kinetostatic model is proposed with substructure synthesis technique. The Exechon is divided into a platform subsystem, a fixed base subsystem and three limb subsystems according to its structure. By modeling the limb assemblage as a spatial beam constrained by two sets of lumped virtual springs representing the compliances of revolute joint, universal joint and spherical joint, the equilibrium equations of limb subsystems are derived with finite element method（FEM）. The equilibrium equations of the platform are derived with Newton＇s 2nd law. By introducing deformation compatibility conditions between the platform and limb, the governing equilibrium equations of the system are derived to formulate an analytical expression for system＇s deflections. The platform＇s elastic displacements and joint reactions caused by the gravity are investigated to show a strong position-dependency and axis-symmetry due to its kinematic and structure features. The proposed kinetostatic model is a trade-off between the accuracy of FEM and concision of analytical method, thus can predict the kinetostatics throughout the workspace in a quick and succinct manner. The proposed modeling methodology and kinetostatic analysis can be further expanded to other PKMs with necessary modifications, providing useful information for kinematic calibration as well as component strength calculations.展开更多
基金Project supported by the National Research Foundation of Korea(Nos.NRF-2020R1C1C1011970 and NRF-2018R1A5A7023490)。
文摘This paper presents a new computational method for forward uncertainty quantification(UQ)analyses on large-scale structural systems in the presence of arbitrary and dependent random inputs.The method consists of a generalized polynomial chaos expansion(GPCE)for statistical moment and reliability analyses associated with the stochastic output and a static reanalysis method to generate the input-output data set.In the reanalysis,we employ substructuring for a structure to isolate its local regions that vary due to random inputs.This allows for avoiding repeated computations of invariant substructures while generating the input-output data set.Combining substructuring with static condensation further improves the computational efficiency of the reanalysis without losing accuracy.Consequently,the GPCE with the static reanalysis method can achieve significant computational saving,thus mitigating the curse of dimensionality to some degree for UQ under high-dimensional inputs.The numerical results obtained from a simple structure indicate that the proposed method for UQ produces accurate solutions more efficiently than the GPCE using full finite element analyses(FEAs).We also demonstrate the efficiency and scalability of the proposed method by executing UQ for a large-scale wing-box structure under ten-dimensional(all-dependent)random inputs.
基金Supported by National Natural Science Foundation of China(Grant No.51475211)
文摘Mechanical assembly has its own dynamic quality directly affecting the dynamic quality of whole product and should be considered in quality inspection and estimation of mechanical assembly. Based on functional relations between dynamic characteristics involved in mechanical assembly, the effects of assembling process on dynamic characteristics of substructural components of an assembly system are investigated by substructuring analysis. Assembly-coupling dynamic stiffness is clarified as the dominant factor of the effects and can be used as a quantitative measure of assembly dynamic quality. Two computational schemes using frequency response functions（FRFs） to determine the stiffness are provided and discussed by inverse substructuring analysis, including their applicable conditions and implementation procedure in application. Eigenvalue analysis on matrix-ratios of FRFs before and after assembling is employed and well validates the analytical outcomes and the schemes via both a lumped-parameter model and its analogic experimental counterpart. Applying the two schemes to inspect the dynamic quality provides the message of dynamic performance of the assembly system, and therefore improves conventional quality inspection and estimation of mechanical assembly in completeness.
文摘The paper deals with the dynamic response prediction of the composite structure,which consists of two linear components coupled by some nonlinear vibration isolators. Based on the measured impulse response functions of the linear components, three kinds of dynamic equations of interfacial integration are proposed and a procedure to transform the dynamic equations of integral type into a set of ordinary differential equations is suggested. Computer simulations and a real test are given to verify the effectiveness of the theoretical results.
基金Supported by the Ministerial Level Foundation(2012021)
文摘A low frequency dynamic environment prediction of spacecraft using dynamic substructu- ring is presented. The dynamic environment could be used to describe the level of the excitation on the spacecraft itself and auxiliary equipment. In addition, the dynamic environment is a criterion for the structural dynamic design as well as the ground verification test. The proposed prediction method could solve two major problems. The first is the time consumption of analyzing the whole spacecraft model due to the huge amount of degrees of freedom, and the second is multi-source for component structural dynamic models from distributive departments. To demonstrate the feasibility and efficien- cy, the proposed prediction method is applied to resolve a launching satellite case, and the results were compared with those obtained by the traditional prediction technology using the finite element method.
基金Ordinary University Graduate Student Research Innovation Projects of Jiangsu Province(No.CXZZ12 0177)the National Natural Science Foundation of China(No.61304137)
文摘In this paper, the substructuring technique is extended for the dynamics simulation of flexible beams with large deformation. The dynamics equation of a spatial straight beam undergoing large displacement and small deformation is deduced by using the Jourdain variation principle and the model synthesis method. The longitudinal shortening effect due to the transversal deformation is taken into consideration in the dynamics equation. In this way, the geometric stiffening effect, which is also called stress stiffening effect, is accounted for in the dynamics equation. The transfer equation of the flexible beam is obtained by assembling the dynamics equation and the kinematic relationship between the two connection points of the flexible beam. Treating a flexible beam with small deformation as a substructure, one can solve the dynamics of a flexible beam with large deformation by using the substructuring technique and the transfer matrix method. The dynamics simulation of a flexible beam with large deformation is carried out by using the proposed approach and the results are verified by comparing with those obtained from Abaqus software.
基金supported by the National Natural Science Foundation of China(Grants Nos.51978150 and 52050410334)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grants No.SJCX23_0069)the Fundamental Research Funds for the Central Universities.
文摘Conical origami structures are characterized by their substantial out-of-plane stiffness and energy-absorptioncapacity.Previous investigations have commonly focused on the static characteristics of these lightweight struc-tures.However,the efficient analysis of the natural vibrations of these structures is pivotal for designing conicalorigami structures with programmable stiffness and mass.In this paper,we propose a novel method to analyzethe natural vibrations of such structures by combining a symmetric substructuring method(SSM)and a gener-alized eigenvalue analysis.SSM exploits the inherent symmetry of the structure to decompose it into a finiteset of repetitive substructures.In doing so,we reduce the dimensions of matrices and improve computationalefficiency by adopting the stiffness and mass matrices of the substructures in the generalized eigenvalue analysis.Finite element simulations of pin-jointed models are used to validate the computational results of the proposedapproach.Moreover,the parametric analysis of the structures demonstrates the influences of the number of seg-ments along the circumference and the radius of the cone on the structural mass and natural frequencies of thestructures.Furthermore,we present a comparison between six-fold and four-fold conical origami structures anddiscuss the influence of various geometric parameters on their natural frequencies.This study provides a strategyfor efficiently analyzing the natural vibration of symmetric origami structures and has the potential to contributeto the efficient design and customization of origami metastructures with programmable stiffness.
基金supported by the National Natural Science Foundation of China(Grant No.12272144).
文摘A data-driven model ofmultiple variable cutting(M-VCUT)level set-based substructure is proposed for the topology optimization of lattice structures.TheM-VCUTlevel setmethod is used to represent substructures,enriching their diversity of configuration while ensuring connectivity.To construct the data-driven model of substructure,a database is prepared by sampling the space of substructures spanned by several substructure prototypes.Then,for each substructure in this database,the stiffness matrix is condensed so that its degrees of freedomare reduced.Thereafter,the data-drivenmodel of substructures is constructed through interpolationwith compactly supported radial basis function(CS-RBF).The inputs of the data-driven model are the design variables of topology optimization,and the outputs are the condensed stiffness matrix and volume of substructures.During the optimization,this data-driven model is used,thus avoiding repeated static condensation that would requiremuch computation time.Several numerical examples are provided to verify the proposed method.
基金financial support by the National Natural Science Foundation of China(No.51364032)the Inner Mongolia Natural Science Foundation(No.2022MS05028)。
文摘The spray-deposition was used to produce billets of Mg-4Al-1.5Zn-3Ca-1Nd(A alloy)and Mg-13Al-3Zn-3Ca-1Nd(B alloy),and evolution of deformation substructure and Mg_(x)Zn_(y)Ca_(z)metastable phase in fine-grained(3μm)Mg alloys was investigated by scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray diffraction(XRD),and electron backscattered diffraction(EBSD).It was found that different dislocation configurations were formed in A and B alloys.Redundant free dislocations(RFDs)and dislocation tangles were the ways to form deformation substructure in A alloy,no RFDs except dislocation tangles were found in B alloy.The interaction between nano-scale second phase particles(nano-scale C15 andβ-Mg_(17)(Al,Zn)_(12)phase)and different dislocation configurations had a significant effect on the deformation substructures formation.The mass transfer of Mg_(x)Zn_(y)Ca_(z)metastable phases and the stacking order of stacking faults were conducive to the Mg-Nd-Zn typed long period stacking ordered(LPSO)phases formation.Nano-scale C15 phases,Mg-Nd-Zn typed LPSO phases,c/a ratio,β-Mg_(17)(Al,Zn)_(12)phases were the key factors influencing the formation of textures.Different textures and grain boundary features(GB features)had a significant effect on k-value.The non-basal textures were the main factor affecting k-value in A alloy,while the high-angle grain boundary(HAGB)was the main factor affecting k-value in B alloy.
基金financial support from the Australian Research Council for ARCLP200200915 and ARCDP220102862financial and technical support from industry partners including Sydney Trains,SMEC Australia Pty.
文摘Facing the high demand for faster and heavier freight trains in Australia,researchers and practitioners are endeavouring to develop more innovative and resilient ballasted tracks.In recent years,many studies have been conducted by the researchers from Transport Research Centre at the University of Technology Sydney(TRC-UTS)to examine the feasibility of incorporating recycled tyre/rubber into rail tracks.This paper reviews three innovative applications using recycled rubber products such as(1)a synthetic energy-absorbing layer for railway subballast using a composite of rubber crumbs and mining byproducts,(2)using rubber intermixed ballast stratum to replace conventional ballast,and(3)installing recycled rubber mat to mitigate ballast degradation under the impact loading.Comprehensive laboratory and field tests as well as numerical modelling have been conducted to examine the performance of rail tracks incorporating these innovative inclusions.The laboratory and field test results and numerical modelling reveal that incorporating these rubber products could increase the energy-absorbing capacity of the track,and mitigate the ballast breakage and settlement significantly,hence increasing the track stability.The research outcomes will facilitate a better understanding of the performance of ballast tracks incorporating these resilient waste tyre materials while promoting more economical and environmentally sustainable tracks for greater passenger comfort and increased safety.
基金supported by the National Key Research and Development Program of China(No.2022YFF0609000)the National Natural Science Foundation of China(Nos.52171034 and 52101037)the Postdoctoral Fellowship Program of CPSF(No.GZB20230944).
文摘Ti-Zr-Nb refractory multi-principal element alloys(RMPEAs)have attracted increased attention due to their excellent mechanical properties.In this study,(TiZr)_(80-x)Nb_(20)Mo_(x)(x=0,5 and 10)alloys were designed,and the intrinsic conflicts between strength and ductility were overcome via composition optimization and recrystallization.The causes of the superior strength-ductility synergy were investigated in terms of their deformation mechanism and dislocation behavior.The results show that the strength improvement can be attributed to the deformation mechanism transition caused by local chemical fluctuations and lattice distortion.Specifically,the slip band widths decrease after Mo addition,and the measured slip traces in the fracture samples are associated with high-order{112}and{123}slip planes.Furthermore,the grain refinement achieved via recrystallization promotes multi-slip system activation and shortens the slip-band spacing,which reduces the stress concentration and inhibits crack source formation,thereby allowing the alloy to ensure sufficient ductility.Consequently,the Ti_(35)Zr_(35)Nb_(20)Mo_(10)alloy annealed at 900℃ exhibits high yield strength and elongation.These findings provide a new strategy for designing high-strength RMPEAs and addressing room-temperature brittleness.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.32371280 and T2350011)。
文摘Considering the pivotal role of single-wavelength anomalous diffraction(SAD) in macromolecular crystallography,our objective was to introduce DSAS,a novel program designed for efficient anomalous scattering substructure determination.DSAS stands out with its core components:a modified phase-retrieval algorithm and automated parameter tuning.The software boasts an intuitive graphical user interface(GUI),facilitating seamless input of essential data and real-time monitoring.Extensive testing on DSAS has involved diverse datasets,encompassing proteins,nucleic acids,and various anomalous scatters such as sulfur(S),selenium(Se),metals,and halogens.The results confirm DSAS’s exceptional performance in accurately determining heavy atom positions,making it a highly effective tool in the field.
基金National Natural Science Foundation of China under Grant Nos.51978213 and 51778190the National Key Research and Development Program of China under Grant Nos.2017YFC0703605 and 2016YFC0701106。
文摘For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study proposes to investigate the stability and accuracy of the central difference method(CDM)for RTDST considering the specimen mass participation coefficient.First,the theory of the CDM for RTDST is presented.Next,the stability and accuracy of the CDM for RTDST considering the specimen mass participation coefficient are investigated.Finally,numerical simulations and experimental tests are conducted for verifying the effectiveness of the method.The study indicates that the stability of the algorithm is affected by the mass participation coefficient of the specimen,and the stability limit first increases and then decreases as the mass participation coefficient increases.In most cases,the mass participation coefficient will increase the stability limit of the algorithm,but in specific circumstances,the algorithm may lose its stability.The stability and accuracy of the CDM considering the mass participation coefficient are verified by numerical simulations and experimental tests on a three-story frame structure with a tuned liquid damper.
基金Project(0211002605132)supported by Institute of Multipurpose Utilization of Mineral Resources,Chinese Academy of Geological Sciences,ChinaProject(0211005303101)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(2010BB4074)supported by Natural Science Foundation Project of CQ CSTC,ChinaProject(2010ZD-02)supported by State Key Laboratory for Advanced Metals and Materials,China
文摘The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys （x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%）, produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and aging treatment. The effects of minor Sc and Zr addition on microstructure, recrystallization and properties of alloys were studied by optical microscopy （OM）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results show that Sc and Zr addition can refine grains of the as-cast alloy by precipitation of primary Al3（Sc,Zr） particles formed during solidification as heterogeneous nuclei. Secondary Al3（Sc,Zr） precipitates formed during homogenization treatment strongly pin the movement of dislocation and subgrain boundaries, which can effectively inhibit the alloys recrystallization. Compared with the alloy without Sc and Zr addition, the Al-Zn-Mg-Cu-Zr alloy with 0.05%Sc and 0.15%Zr shows the increase in tensile strength and yield strength by 172 MPa and 218 MPa, respectively. Strengthening comes from the contributions of precipitation, substructure and grain refining.
基金Supported by National Natural Science Foundation of China(60802040)Youth Fund in Southwest University of Science and Technology(10zx3106)~~
文摘In order to decrease model complexity of rice panicle for its complicated morphological structure,an interactive L-system based on substructure algorithm was proposed to model rice panicle in this study.Through the analysis of panicle morphology,the geometrical structure models of panicle spikelet,axis and branch were constructed firstly.Based on that,an interactive panicle L-system model was developed by using substructure algorithm to optimize panicle geometrical models with the similar structure.Simulation results showed that the interactive L-system panicle model based on substructure algorithm could fast construct panicle morphological structure in reality.In addition,this method had the well reference value for other plants model research.
文摘The wave-shaped space truss is used as the roof of the natatorium in Tianjin University,which ingeniously displays the function of the building.In this paper,the wave-shaped space truss is analyzed and designed,considering the substructure made of reinforced concrete rigid frame and the space truss working together.Also,the anti-seismic characteristic of the wave-shaped space truss is studied based on the integral model.
基金National Natural Science Foundation of China under Grant No.51478247National Key Research and Development Program of China under Grant No.2016YFC1402800
文摘The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident wave into equivalent loads on the cutoff boundaries. The wave method has high precision, but the implementation is complicated, especially for three-dimensional models. By deducing another form of equivalent input seismic loads in the fi nite element model, a new seismic wave input method is proposed. In the new method, by imposing the displacements of the free wave fi eld on the nodes of the substructure composed of elements that contain artifi cial boundaries, the equivalent input seismic loads are obtained through dynamic analysis of the substructure. Subsequently, the equivalent input seismic loads are imposed on the artifi cial boundary nodes to complete the seismic wave input and perform seismic analysis of the soil-structure dynamic interaction model. Compared with the wave method, the new method is simplifi ed by avoiding the complex processes of calculating the equivalent input seismic loads. The validity of the new method is verifi ed by the dynamic analysis numerical examples of the homogeneous and layered half space under vertical and oblique incident seismic waves.
基金funded by National Natural Science Foundation of China(51301038,51371050)Industry-Academia-Research Program of Jiangsu Province of China(BY2014127-03)+2 种基金Natural Science Foundation of Jiangsu Province of China(BK20141306)Key Research Program of Jiangsu Province of China(BE2016154)Jiangsu Province Key Laboratory of High-end Structural Materials of China(hsm1404)
文摘The morphology,microstructure and decomposition behavior of M2C carbides in high speed steels with different chemical compositions have been investigated by scanning electron microscopy,transmission electron microscopy,electron backscatter diffraction and X-ray diffraction.The results show that the morphology and substructure of M2C carbides are very sensitive to chemical compositions of high speed steels.M2C carbides present the plate-like shape in tungsten-molybdenum steel and present the polycrystal orientation in the eutectic cell.In contrast,they show the fibrous shape in molybdenum-base steel and exhibit the monocrystal orientation.Plate-like and fibrous M2C carbides are both metastable and decompose into M6 C together with MC at high temperatures.MC nucleates inside the plate-like M2C while it is formed at the fibrous M2C/matrix interface during the decomposition process.Such differences are expected to arise from different compositions of plate-like and fibrous M2C carbides.
基金Important National Science & Technology Specific Projects (2009ZX04001-073)National Natural Science Foundation of China (51105025)
文摘In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.
基金Supported by State Key Laboratory for Manufacturing Systems Engineering,Xi’an Jiaotong University(Grant No.sklms2015004)Open Research Fund of Key Laboratory of High Performance Complex Manufacturing,Central South University(Grant No.Kfkt2013-12)+2 种基金Open Fund of Shanghai Key Laboratory of Digital Manufacture for Thin-walled Structures(Grant No.2014001)Innovation Research Fund for Postgraduates of Anhui University of Technology(Grant No.2014054)Engineering and Physical Science Research Council in the United Kingdom(Grant No.EP/K004964/1)
文摘As a newly invented parallel kinematic machine（PKM）, Exechon has found its potential application in machining and assembling industries due to high rigidity and high dynamics. To guarantee the overall performance, the loading conditions and deflections of the key components must be revealed to provide basic mechanic data for component design. For this purpose, a kinetostatic model is proposed with substructure synthesis technique. The Exechon is divided into a platform subsystem, a fixed base subsystem and three limb subsystems according to its structure. By modeling the limb assemblage as a spatial beam constrained by two sets of lumped virtual springs representing the compliances of revolute joint, universal joint and spherical joint, the equilibrium equations of limb subsystems are derived with finite element method（FEM）. The equilibrium equations of the platform are derived with Newton＇s 2nd law. By introducing deformation compatibility conditions between the platform and limb, the governing equilibrium equations of the system are derived to formulate an analytical expression for system＇s deflections. The platform＇s elastic displacements and joint reactions caused by the gravity are investigated to show a strong position-dependency and axis-symmetry due to its kinematic and structure features. The proposed kinetostatic model is a trade-off between the accuracy of FEM and concision of analytical method, thus can predict the kinetostatics throughout the workspace in a quick and succinct manner. The proposed modeling methodology and kinetostatic analysis can be further expanded to other PKMs with necessary modifications, providing useful information for kinematic calibration as well as component strength calculations.
