We propose a substrate-free focal plane array （FPA） and the microcantilevers extend from a supporting frame. in this paper. The solid substrate is completely removed, Using finite element analysis, the thermal and m...We propose a substrate-free focal plane array （FPA） and the microcantilevers extend from a supporting frame. in this paper. The solid substrate is completely removed, Using finite element analysis, the thermal and mechanical characterizations of the substrate-free FPA are presented. Because of the large decrease in thermal conductance, the supporting frame is temperature dependent, which brings out a unique feature： the lower the thermal conductance of the supporting frame is, the higher the energy conversion efficiency in the substrate-free FPA will be. The results from the finite element analyses are consistent with our measurements： two types of substrate-free FPAs with pixel sizes of 200×200 and 60×60 um^2 are implemented in the proposed infrared detector. The noise equivalent temperature difference （NETD） values are experimentally measured to be 520 and 300 mK respectively. Further refinements are considered in various aspects, and the substrate-free FPA with a pixel size of 30×30 um^2 has a potential of achieving an NETD value of 10 mK.展开更多
The application of three-dimensional(3D)plasmonic nanostructures as metamaterials(MMs),nano-antennas,and other devices faces challenges in producing metallic nanostructures with easily definable orientations,sophistic...The application of three-dimensional(3D)plasmonic nanostructures as metamaterials(MMs),nano-antennas,and other devices faces challenges in producing metallic nanostructures with easily definable orientations,sophisticated shapes,and smooth surfaces that are operational in the optical regime and beyond.Here,we demonstrate that complex 3D nanostructures can be readily achieved with focused-ion-beam irradiation-induced folding and examine the optical characteristics of plasmonic“nanograter”structures that are composed of free-standing Au films.These 3D nanostructures exhibit interesting 3D hybridization in current flows and exhibit unusual and well-scalable Fano resonances at wavelengths ranging from 1.6 to 6.4 mm.Upon the introduction of liquids of various refractive indices to the structures,a strong dependence of the Fano resonance is observed,with spectral sensitivities of 1400 nm and 2040 nm per refractive index unit under figures of merit of 35.0 and 12.5,respectively,for low-order and high-order resonance in the near-infrared region.This work indicates the exciting,increasing relevance of similarly constructed 3D free-standing nanostructures in the research and development of photonics and MMs.展开更多
A substrate-ffee optical readout focal plane array （FPA） operating in 8-12 um with a heat sink structure （HSS） was fabricated and its performance was tested. The temperature distribution of the FPA with an HSS inv...A substrate-ffee optical readout focal plane array （FPA） operating in 8-12 um with a heat sink structure （HSS） was fabricated and its performance was tested. The temperature distribution of the FPA with an HSS investigated by using a commercial FLIR IR camera shows excellent uniformity. The thermal cross-talk effect existing in traditional substrate-free FPAs was eliminated effectively. The heat sink is fabricated successfully by electroplating copper, which provides high thermal capacity and high thermal conductivity, on the frame of substrate-free FPA. The FPA was tested in the optical-readout system, the results show that the response and NETD are 13.6 grey/K （F / # = 0.8） and 588 inK, respectively.展开更多
Printed micro-supercapacitors(MSCs)have shown broad prospect in flexible and wearable electronics.Most of previous studies focused on printing the electrochemically active materials paying less attention to other key ...Printed micro-supercapacitors(MSCs)have shown broad prospect in flexible and wearable electronics.Most of previous studies focused on printing the electrochemically active materials paying less attention to other key components like current collectors and electrolytes.This study presents an allprinting strategy to fabricate in-plane flexible and substrate-free MSCs with hierarchical encapsulation.This new type of“all-in-one”MSC is constructed by encapsulating the in-plane interdigital current collectors and electrodes within the polyvinyl-alcohol-based hydrogel electrolyte via sequential printing.The bottom electrolyte layer of this fully printed MSCs helps protect the device from the limitation of conventional substrate,showing excellent flexibility.The MSCs maintain a high capacitance retention of 96.84%even in a completely folded state.An optimal electrochemical performance can be achieved by providing ample and shorter transport paths for ions.The MSCs using commercial activated carbon as the active material are endowed with a high specific areal capacitance of 1892.90 mF cm^(-2)at a current density of 0.3 mA cm^(-2),and an outstanding volumetric energy density of 9.20 mWh cm^(-3)at a volumetric power density of 6.89 mW cm^(-3).For demonstration,a thermo-hygrometer is stably powered by five MSCs which are connected in series and wrapped onto a glass rod.This low-cost and versatile all-printing strategy is believed to diversify the application fields of MSCs with high capacitance and excellent flexibility.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10732080 and 10627201)the National Basic Research Program of China (Grant No. 2006CB300404)
文摘We propose a substrate-free focal plane array （FPA） and the microcantilevers extend from a supporting frame. in this paper. The solid substrate is completely removed, Using finite element analysis, the thermal and mechanical characterizations of the substrate-free FPA are presented. Because of the large decrease in thermal conductance, the supporting frame is temperature dependent, which brings out a unique feature： the lower the thermal conductance of the supporting frame is, the higher the energy conversion efficiency in the substrate-free FPA will be. The results from the finite element analyses are consistent with our measurements： two types of substrate-free FPAs with pixel sizes of 200×200 and 60×60 um^2 are implemented in the proposed infrared detector. The noise equivalent temperature difference （NETD） values are experimentally measured to be 520 and 300 mK respectively. Further refinements are considered in various aspects, and the substrate-free FPA with a pixel size of 30×30 um^2 has a potential of achieving an NETD value of 10 mK.
基金This work was supported by the National Natural Science Foundation of China under grant nos.91123004,61390503,61475186 and 91023041,and XDB07020200by the Technical Talent Program of the Chinese Academy of Sciences.
文摘The application of three-dimensional(3D)plasmonic nanostructures as metamaterials(MMs),nano-antennas,and other devices faces challenges in producing metallic nanostructures with easily definable orientations,sophisticated shapes,and smooth surfaces that are operational in the optical regime and beyond.Here,we demonstrate that complex 3D nanostructures can be readily achieved with focused-ion-beam irradiation-induced folding and examine the optical characteristics of plasmonic“nanograter”structures that are composed of free-standing Au films.These 3D nanostructures exhibit interesting 3D hybridization in current flows and exhibit unusual and well-scalable Fano resonances at wavelengths ranging from 1.6 to 6.4 mm.Upon the introduction of liquids of various refractive indices to the structures,a strong dependence of the Fano resonance is observed,with spectral sensitivities of 1400 nm and 2040 nm per refractive index unit under figures of merit of 35.0 and 12.5,respectively,for low-order and high-order resonance in the near-infrared region.This work indicates the exciting,increasing relevance of similarly constructed 3D free-standing nanostructures in the research and development of photonics and MMs.
基金Project supported by the Chinese Academy of Sciences Knowledge Innovation Project(No.07YF031001)the Natural Science Foundation of Jiangsu Province,China(No.BK2012219),the Key Lab of Microelectronics Device and Integration Technology,China
文摘A substrate-ffee optical readout focal plane array （FPA） operating in 8-12 um with a heat sink structure （HSS） was fabricated and its performance was tested. The temperature distribution of the FPA with an HSS investigated by using a commercial FLIR IR camera shows excellent uniformity. The thermal cross-talk effect existing in traditional substrate-free FPAs was eliminated effectively. The heat sink is fabricated successfully by electroplating copper, which provides high thermal capacity and high thermal conductivity, on the frame of substrate-free FPA. The FPA was tested in the optical-readout system, the results show that the response and NETD are 13.6 grey/K （F / # = 0.8） and 588 inK, respectively.
基金financially supported by National Natural Science Foundation of China(Nos.U22A20193 and 51975218)Fundamental Research Funds for the Central Universities(No.2022ZYGXZR101)
文摘Printed micro-supercapacitors(MSCs)have shown broad prospect in flexible and wearable electronics.Most of previous studies focused on printing the electrochemically active materials paying less attention to other key components like current collectors and electrolytes.This study presents an allprinting strategy to fabricate in-plane flexible and substrate-free MSCs with hierarchical encapsulation.This new type of“all-in-one”MSC is constructed by encapsulating the in-plane interdigital current collectors and electrodes within the polyvinyl-alcohol-based hydrogel electrolyte via sequential printing.The bottom electrolyte layer of this fully printed MSCs helps protect the device from the limitation of conventional substrate,showing excellent flexibility.The MSCs maintain a high capacitance retention of 96.84%even in a completely folded state.An optimal electrochemical performance can be achieved by providing ample and shorter transport paths for ions.The MSCs using commercial activated carbon as the active material are endowed with a high specific areal capacitance of 1892.90 mF cm^(-2)at a current density of 0.3 mA cm^(-2),and an outstanding volumetric energy density of 9.20 mWh cm^(-3)at a volumetric power density of 6.89 mW cm^(-3).For demonstration,a thermo-hygrometer is stably powered by five MSCs which are connected in series and wrapped onto a glass rod.This low-cost and versatile all-printing strategy is believed to diversify the application fields of MSCs with high capacitance and excellent flexibility.
