The railway subgrades in the sandy areas act as an obstacle interfering wind-blown sand,causing sand erosion and sedimentation,which can disrupt the safe and stable operation of the railway system.Most previous studie...The railway subgrades in the sandy areas act as an obstacle interfering wind-blown sand,causing sand erosion and sedimentation,which can disrupt the safe and stable operation of the railway system.Most previous studies mainly focus on the flow field around railway subgrades,however,the real erosion and sedimentation patterns are rarely studied.This study aims to analyze the erosion and sand sedimentation patterns of wind-blown sand over the subgrades with different heights and steel rails using the ratio of the wall shear stress to the critical value of erosion shear stress.Results show that wind erosion near the top of the upwind slope of the embankment and the shoulder on the upwind side are more severe,and the severity increases with an increase in the height of the embankment.With the increase of wind velocity,sand sedimentation both on the windward and leeside of the subgrade decreases and wind erosion by reverse flow occur.This study indicates that railways in sandy areas should be constructed with a moderate subgrade height(4 m).展开更多
This study explores the coupling effect of pond ash(PA)and polypropylene(PP)fiber to control the strength and durability of expansive soil.The PA is used to chemically treat the expansive soil and PP fiber is adopted ...This study explores the coupling effect of pond ash(PA)and polypropylene(PP)fiber to control the strength and durability of expansive soil.The PA is used to chemically treat the expansive soil and PP fiber is adopted as reinforcement against tensile cracking.The sustainable use of PA and PP fiber are demonstrated by performing mechanical(i.e.unconfined compressive strength,split tensile strength and ultrasonic pulse velocity),chemical(pH value,electrical conductivity and calcite content),and microstructural analyses before and after 2nd,4th,6th,8th and 10th freezing-thawing(F-T)cycles.Three curing methods with 7 d,14 d and 28 d curing periods are considered to reinforce the 5%,10%,15%and 20%PA-stabilized expansive soil with 0.25%,0.5%and 1%PP fiber.In order to develop predictive models for mechanical and durability parameters,the experimental data are processed utilizing artificial neural network(ANN),in association with the leave-one-out cross-validation(LOOCV)as a resampling method and three different activation functions.The mechanical and durability properties of the PA-stabilized expansive soil subgrades are increased with PP fiber reinforcement.The results of ANN modeling predict the mechanical properties perfectly,and the correlation coefficient(R)approaches up to 0.96.展开更多
With the rapid development of current social economy,China’s infrastructure construction is constantly increasing.The development of transportation industry and road structure which serve as infrastructure facility f...With the rapid development of current social economy,China’s infrastructure construction is constantly increasing.The development of transportation industry and road structure which serve as infrastructure facility for the vehicles are fundamental aspect in economy growth.It’s not only convenience to people for travel,but also as a good foundation for the development of economy.Therefore,the quality of road construction is of great significance importance in the process of development.As technology advances,engineering construction is continuously expanding,especially in the road engineering sector.In this point,it’s necessary to impose strict quality control over related matters and ensure the quality and safety of municipal road construction.In the construction of municipal road engineering,one of the most important components is the compaction of subgrades and pavements,which requires more supervision.The compaction should match the requirements of road design and implement relevant work.展开更多
The operation of a railway track in cold regions results in the premature deformation of subgrade soils caused by significant temperature fluctuations and ecological imbalance.Identification and calculation of the tha...The operation of a railway track in cold regions results in the premature deformation of subgrade soils caused by significant temperature fluctuations and ecological imbalance.Identification and calculation of the thawing degree of permafrost soils,frost heaving of clays,and groundwater flooding require careful engineering and geological surveying.The paper describes the unique,long-standing experience of the university scientists connected with maintaining the Russian EastSiberian and Trans-Baikal Railways'facilities.Specific features of and requirements for the surveying,depending on the geological and climatic conditions,are identified.展开更多
This study presents a numerical method based on the surface temperature data and the ground temperature increase in Daqing for predicting temperature field distribution in the Binzhou Railway subgrade and analyzing th...This study presents a numerical method based on the surface temperature data and the ground temperature increase in Daqing for predicting temperature field distribution in the Binzhou Railway subgrade and analyzing the temporal and spatial distribution of freeze−thaw status of railway subgrade.The calibrated numerical method is applied to simulate the temperature field distribution and roadbed vibrational response of the railway subgrade with a thermal insulation layer at different seasons.The results show the following:(1)The thermal insulation layer can remarkably increase the soil temperature below it and maximum frost depth in the subgrade.(2)Thermal insulation can effectively reduce the subgrade vibration and protect it from frost damage.(3)Given that the strength requirements are met,the insulation layer should be buried as shallow as possible to effectively reduce the subgrade vibration response.The research findings provide theoretical support for the frost damage prevention of railway subgrades in seasonally frozen regions.展开更多
Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the su...Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.展开更多
Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring...Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring elements)is technically significant for the rational design of prestressed subgrade.A three-dimensional finite element model was established and verified based on a novel static model test and utilized to systematically analyze the influence of prestress levels and reinforcement modes on the reinforcement effect of the subgrade.The results show that the PRCs provide additional confining pressure to the subgrade through the diffusion effect of the prestress,which can therefore effectively improve the service performance of the subgrade.Compared to the unreinforced conventional subgrades,the settlements of prestressreinforced subgrades are reduced.The settlement attenuation rate(Rs)near the LPPs is larger than that at the subgrade center,and increasing the prestress positively contributes to the stability of the subgrade structure.In the multi-row reinforcement mode,the reinforcement effect of PRCs can extend from the reinforced area to the unreinforced area.In addition,as the horizontal distance from the LPPs increases,the additional confining pressure converted by the PSBs and LPPs gradually diminishes when spreading to the core load bearing area of the subgrade,resulting in a decrease in the Rs.Under the singlerow reinforcement mode,PRCs can be strategically arranged according to the local areas where subgrade defects readily occurred or observed,to obtain the desired reinforcement effect.Moreover,excessive prestress should not be applied near the subgrade shoulder line to avoid the shear failure of the subgrade shoulder.PRCs can be flexibly used for preventing and treating various subgrade defects of newly constructed or existing railway lines,achieving targeted and classified prevention,and effectively improving the bearing performance and deformation resistance of the subgrade.The research results are instructive for further elucidating the prestress reinforcement effect of PRCs on railway subgrades.展开更多
Purpose–Salt rock from salt lakes can serve as a cost-effective material for subgrade filling,as demonstrated in projects like the Qarhan Salt Lake section of the Qinghai-Tibet Railway and the Qarhan Salt Lake sectio...Purpose–Salt rock from salt lakes can serve as a cost-effective material for subgrade filling,as demonstrated in projects like the Qarhan Salt Lake section of the Qinghai-Tibet Railway and the Qarhan Salt Lake section of the G215 Highway.This state-of-the-art paper aims to summarize the engineering properties of salt rock filling and present the advances of its utilization.Design/methodology/approach–This paper collects and analyzes laboratory and field data of salt rock filling from previous studies to present a comprehensive analysis of the engineering properties and utilization of salt rock fillings.Findings–Salt rock primarily contains minerals such as halite and glauberite,which contribute to its unique phase-changing behavior under varying environmental conditions,impacting its mechanical properties.Salt rock filling shrinks when in contact with vapor or unsaturated brine and expands under cooling or evaporation.Its use is particularly recommended for arid regions,with specific restrictions depending on the structure type.This paper discusses suggested countermeasures to mitigate these issues,as well as key quality acceptance indices for salt rock filling compaction.Moisture content after air-drying is recommended as a crucial parameter for construction quality control.Originality/value–This review aims to support future research and engineering practices in salt rock subgrade applications.展开更多
To mitigate the sand burial of highways in sandy regions,a separated subgrade design was widely adopted in the embankments of high-grade highways,but the problem of sand deposition on subgrade slopes and pavements sti...To mitigate the sand burial of highways in sandy regions,a separated subgrade design was widely adopted in the embankments of high-grade highways,but the problem of sand deposition on subgrade slopes and pavements still happens frequently.Based on the theory of wind-sand two-phase flow,this paper constructed a three-dimensional model of the separated subgrade,the wind-sand flow transport law around the subgrade with varying median strip widths and concave depths was simulated by Fluent software.After comparison and analysis of seven subgrade models,the flow field distribution,wind speed horizontal variation,and erosion-deposition characteristics were investigated.The findings are as follows:(1)The width of the median strip in the separated subgrade had significant influences on the wind-sand flow.The smooth passage of wind-sand flow over the road surface was facilitated with the increase of the median strip width.However,sand deposition in the median strip happened.It can lead to secondary sand damage of downwind subgrade and increase the work load of road sand removal for subsequent maintenance.(2)The obstruction to airflow and sand accumulation was aggravated with greater concave depth of the median strip.Therefore,it is advisable to minimize the concave depth of the median strip in case of more sand damage.(3)A median strip width exceeding 12 m(possibly without guardrails)for an integral embankment without enough road land is recommended.Conversely,median strip width of over 40 m for separate subgrade with unrestricted land is suggested.(4)In the case of sand deposition in the existing separated subgrade,the median strip can be filled by sand deposition or other materials,then was covered with gravel to form a flat ground like Gobi smooth surface,which can let the wind-blown sand flow pass through the subgrade section without sand deposition.展开更多
When the expressway crosses the goafs inevitably,the design is generally to build the road on coal pillars as much as possible.However,the existing coal pillars are often unable to meet relevant requirements of highwa...When the expressway crosses the goafs inevitably,the design is generally to build the road on coal pillars as much as possible.However,the existing coal pillars are often unable to meet relevant requirements of highway construction.Combining three-dimensional physical model tests,numerical simulations and field monitoring,with the Urumqi East Second Ring Road passing through acute inclined goafs as a background,the deformation and failure mechanism of the overlying rock and coal pillars in acute inclined goafs under expressway load were studied.And in accordance with construction requirements of subgrade,comprehensive consideration of the deformation and instability mechanism of acute inclined goafs,the treatment measures and suggestions for this type of geological disasters were put forward.The research results confirmed the rationality of coal pillars in acute inclined goafs under the expressway through grouting.According to the ratio of diff erent overlying rock thickness to coal pillar height,the change trend and value of the required grouting range were summarized,which can provide reference for similar projects.展开更多
Biochar,a solid carbonaceous material produced by heating biomass in oxygen-free or low-oxygen conditions(pyrolysis),has been used in various applications,including wastewater treatment,carbon sequestration,and improv...Biochar,a solid carbonaceous material produced by heating biomass in oxygen-free or low-oxygen conditions(pyrolysis),has been used in various applications,including wastewater treatment,carbon sequestration,and improving soil fertility.However,very limited research has been performed to explore its feasibility to improve the expansive clay(EC)subgrade.In this study,fine-grained wood biochar derived from wood waste was used to stabilise and enhance the mechanical performance of the EC as road subgrade.A comprehensive series of geotechnical tests,including unconfined compressive strength(UCS),California bearing ratio(CBR),repeated load triaxial(RLT),and swelling-shrinkage tests,were conducted to investigate the engineering properties of expansive clay mixed with different contents of the fine-grained biochar(FGB)(i.e.0,1%,2%,3%,and 4%by weight of dry soil).Furthermore,X-ray diffraction(XRD),X-ray fluorescence(XRF),X-ray micro-CT,and thermogravimetric analysis(TGA)analyses were performed to study the microchemical modification of the EC-FGB mixtures.The results showed that adding FGB reduced the swelling and shrinkage potential while enhancing the mechanical properties of the EC.The micro-level analysis also supported the enhancement of the geotechnical performance of the EC resulting from the incorporation of FGB.According to the test results,2%FGB was considered the optimum content,increasing UCS,CBR,and resilient modulus by 31.1%,24.1%,and 31.5%,respectively,and decreasing the swell-shrinkage index by 7%.展开更多
Purpose–The deformation of the roadbed is easily influenced by the external environment to improve the accuracy of high-speed railway subgrade settlement prediction.Design/methodology/approach–A high-speed railway s...Purpose–The deformation of the roadbed is easily influenced by the external environment to improve the accuracy of high-speed railway subgrade settlement prediction.Design/methodology/approach–A high-speed railway subgrade settlement interval prediction method using the secretary bird optimization(SBOA)algorithm to optimize the BP neural network under the premise of gray relational analysis is proposed.Findings–Using the SBOA algorithm to optimize the BP neural network,the optimal weights and thresholds are obtained,and the best parameter prediction model is combined.The data were collected from the sensors deployed through the subgrade settlement monitoring system,and the gray relational analysis is used to verify that all four influencing factors had a great correlation to the subgrade settlement,and the collected data are verified using the model.Originality/value–The experimental results show that the SBOA-BP model has higher prediction accuracy than the BP model,and the SBOA-BP model has a wider range of prediction intervals for a given confidence level,which can provide higher guiding value for practical engineering applications.展开更多
Real-time assessment of subgrade compaction quality poses a significant challenge in the implementation of intelligent compaction(IC).Current compaction evaluation models are confined to specific scenarios and lack ro...Real-time assessment of subgrade compaction quality poses a significant challenge in the implementation of intelligent compaction(IC).Current compaction evaluation models are confined to specific scenarios and lack robustness.This study proposes a subgrade compaction strategy that utilizes a heterogeneous dataset to estimate compaction quality across diverse scenarios while maintaining model accuracy.Field compaction tests are conducted in four distinct scenarios,considering various construction parameters.Compaction models are developed using several machine learning algorithms.The datasets are thoroughly assessed in terms of quality,diversity and similarity.The proposed model exhibits good performance in new scenarios by incorporating an additional 5%e8%of new data for retraining.The model's generalization capability is enhanced by conducting a limited number of field tests,which are labor-saving and time-efficient.The model's accuracy consistently improves across diverse scenarios and optimal algorithms.The proposed compaction strategy adopts a physics-and-data dual-driven approach,aimed at practical engineering applications and guiding the compaction procedure.展开更多
Foamed concrete has been used to address the issue of differential settlement in high-speed railway subgrades in China.However,to enhance crack resistance,reinforcement is still necessary,and further research is requi...Foamed concrete has been used to address the issue of differential settlement in high-speed railway subgrades in China.However,to enhance crack resistance,reinforcement is still necessary,and further research is required to better understand the performance of foamed concrete in subgrade applications.To this end,a series of tests—including uniaxial compres-sive and dynamic triaxial tests—were conducted to comprehensively examine the effects of basalt fiber reinforcement on the mechanical properties of foamed concrete with densities of 700 and 1000 kg/m3.Additionally,a full-scale model of the foamed concrete subgrade was established,and simulated loading was applied.The diffusion patterns of dynamic stress and dynamic acceleration within the subgrade were explored,leading to the development of experimental formulas to calculate the attenuation coefficients of these two parameters along the depth and width of the subgrade.Furthermore,the dynamic displacement and cumulative settlement were analyzed to evaluate the stability of the subgrade.These findings provide valuable insights for the design and construction of foamed concrete subgrades in high-speed rail systems.The outcomes are currently under consideration for inclusion in the code of practice for high-speed rail restoration.展开更多
Purpose–This paper conducts a joint analysis of monitoring data in the hidden danger areas of railway subgrade deformation using a data-driven method,thereby realizing the systematic risk identification of regional h...Purpose–This paper conducts a joint analysis of monitoring data in the hidden danger areas of railway subgrade deformation using a data-driven method,thereby realizing the systematic risk identification of regional hidden dangers.Design/methodology/approach–The paper proposes a regional systematic risk identification method based on Bayesian and independent component analysis(ICA)theories.Firstly,the Gray Wolf Optimization(GWO)algorithm is used to partition each group of monitoring data in the hidden danger area,so that the data distribution characteristics within each sub-block are similar.Then,a distributed ICA early warning model is constructed to obtain prior knowledge such as control limits and statistics of the area under normal conditions.For the online evaluation process,the input data is partitioned following the above-mentioned procedure and the ICA statistics of each sub-block are calculated.The Bayesian method is applied to fuse online parameters with offline parameters,yielding statistics under a specific confidence interval.These statistics are then compared with the control limits–specifically,checking whether they exceed the pre-set confidence parameters–thus realizing the systematic risk identification of the hidden danger area.Findings–Through simulation experiments,the proposed method can integrate prior knowledge such as control limits and statistics to effectively determine the overall stability status of the area,thereby realizing the systematic risk identification of the hidden danger area.Originality/value–The proposed method leverages Bayesian theory to fuse online process parameters with offline parameters and further compares them with confidence parameters,thereby effectively enhancing the utilization efficiency of monitoring data and the robustness of the analytical model.展开更多
Purpose-The indoor vibration compaction test(IVCT)was a key step in controlling the compaction quality for high-speed railway graded aggregate(HRGA),which currently had a research gap on the assessment indicators and ...Purpose-The indoor vibration compaction test(IVCT)was a key step in controlling the compaction quality for high-speed railway graded aggregate(HRGA),which currently had a research gap on the assessment indicators and compaction parameters.Design/methodology/approach-To address these issues,a novel multi-indicator IVCT method was proposed,including physical indicator dry density(ρd)and mechanical indicators dynamic stiffness(Krb)and bearing capacity coefficient(K20).Then,a series of IVCTs on HRGA under different compaction parameters were conducted with an improved vibration compactor,which could monitor the physical-mechanical indicators in real-time.Finally,the optimal vibration compaction parameters,including the moisture content(ω),the diameter-to-maximum particle size ratio(Rd),the thickness-to-maximum particle size ratio(Rh),the vibration frequency(f),the vibration mass(Mc)and the eccentric distance(re),were determined based on the evolution characteristics for the physical-mechanical indicators during compaction.Findings-All results indicated that theρd gradually increased and then stabilized,and the Krb initially increased and then decreased.Moreover,the inflection time of the Krb was present as the optimal compaction time(Tlp)during compaction.Additionally,optimal compaction was achieved whenωwas the water-holding content after mud pumping,Rd was 3.4,Rh was 3.5,f was the resonance frequency,and the ratio between the excitation force and the Mc was 1.8.Originality/value-The findings of this paper were significant for the quality control of HRGA compaction.展开更多
Purpose-Conventional high-speed railways(HSR)subgrade design methods remain constrained by platformdependent drafting systems,leading to data interaction hindrances and redundant design processes.This study strives to...Purpose-Conventional high-speed railways(HSR)subgrade design methods remain constrained by platformdependent drafting systems,leading to data interaction hindrances and redundant design processes.This study strives to develop a digital earthwork design methodology that enhances design while reducing collaborative expenses.Design/methodology/approach-A novel digital subgrade design approach,utilizing sophisticated analysis and modeling tools customized for different subgrade elements,is put forward in this study.The methodology incorporates the following essential steps:(1)the advancement of digital analysis and modeling techniques for diverse subgrade components,including surfaces,filling,slopes,retaining structures,and foundation treatments;(2)the formulation of a digital design principle repository incorporating various slope protection combinations;(3)the establishment of a comprehensive digital design framework and process for subgrade cross-sections;and(4)the development and implementation of an open-source digital design system.Findings-The proposed method liberates subgrade design from the constraints of conventional drawing platforms,elevating efficiency,intelligence,and flexibility.The open software architecture and code have achieved over 60%efficiency gains in design workflows during its deployment on three major high-speed rail projects:the Baotou-Yinchuan HSR corridor,Shenyang-Baihe HSR network,and Weifang-Yantai HSR system.Originality/value-This paper introduces an innovative digital design methodology that enables modular and parametric design for railway subgrade sections.The proposed approach provides a digital base for the intelligent design and maintenance of the next-generation high-speed railway.展开更多
The pile-plate structure has proven highly effective support for high-speed railway subgrades,particularly in poor geological conditions.Although its efficacy in non-frozen regions is well-established,its potential in...The pile-plate structure has proven highly effective support for high-speed railway subgrades,particularly in poor geological conditions.Although its efficacy in non-frozen regions is well-established,its potential in frozen regions remains underexplored.In seasonally frozen areas,F-T(freeze-thaw)cycles threaten subgrade stability,necessitating research on pile-plate structure’s behavior under such conditions.To address this challenge,a scaled model experiment was conducted on a silty sand foundation,simulating F-T cycles using temperature control devices.Key parameters,including soil temperature,frozen depth,and displacement,were systematically monitored.Results indicate that the bearing plate functions as an effective insulation layer,significantly reducing sub-zero temperature penetration.Additionally,the anchoring action of the piles mitigates frost heave in the foundation soil,while the plate middle restrains soil deformation more effectively due to increased constraint.The thermal insulation provided by the plate maintains higher soil temperatures,delaying the onset of freezing.By the end of each freezing stage,the vertical displacement in the natural subgrade is approximately 4 times greater than that beneath the pile-plate structure.Furthermore,the frost depth is about 1.3-1.4 times and 1.6-4.9 times greater than that measured below the plate edge and middle,respectively.These insights contribute to the development of more resilient designs for high-speed railway subgrades in seasonally frozen regions,offering engineers a robust,scientifically-backed foundation for future infrastructure projects.展开更多
The sustainable geotechnical approach for addressing the challenges associated with clayey soils at construction sites involves the modification of these soils’mechanical and chemical characteristics using soil enhan...The sustainable geotechnical approach for addressing the challenges associated with clayey soils at construction sites involves the modification of these soils’mechanical and chemical characteristics using soil enhancement methods.The present study investigates the coupling effect of sandstone slurry waste(SSW)and calcium carbonate nanoparticle(CCN)as potential stabilizers to enhance the characteristics of clayey soil.A comprehensive investigation was conducted using compaction tests,plasticity index(PI)tests,California bearing ratio(CBR)tests,unconfined compressive strength(UCS)tests,and microstructural analyses of clayey soil,SSW and SSW-CCN-treated clay samples containing 5%,10%,15%,20%,25%,30%,and 35%SSW and 0.3%,0.6%,0.9%,1.2%,and 1.5%CCN mixed with clayey soil in different combinations of clay,SSW,and CCN.The findings reveal that incorporating 25%SSW with 0.9%CCN into clay soil results in an increase in the UCS from 132.2 kPa for untreated clayey soil without curing to 263 kPa after a 28-d curing period.Similarly,a rising trend in CBR results is observed up to 25%SSW addition in clay soil and up to 0.9%CCN addition in SSW-clay mixture.Initially,notable enhancements in UCS were attributed to a denser soil structure,followed by the formation of calcium–silicate–hydrate(CSH)gel,which intensified with prolonged curing.Gel patches were detected by scanning electron microscopy(SEM)in addition to particle aggregation.The results obtained from thermogravimetric analysis,Fourier transform infrared spectroscopy(FTIR),and X-ray diffraction(XRD)supported the presence of hydration products such as CSH.The experimental study indicates that SSW,in combination with CCN,offers a sustainable alternative to traditional soil stabilizers.展开更多
Based on a highway reconstruction project in southern China,this study aims to put forward a method to determine the proper treatment depth of the existing subgrade.First,some field tests including the Beckman beam de...Based on a highway reconstruction project in southern China,this study aims to put forward a method to determine the proper treatment depth of the existing subgrade.First,some field tests including the Beckman beam deflection test and portable falling weight deflectometer(PFWD)test were carried out.The results showed that there was a good correlation between the Beckman beam deflection(L)and PFWD modulus(Ep).Subsequently,a subgrade section was excavated and backfilled with cement-stabilized soil in layers.Compaction test,dynamic cone penetrometer rate test,plate load test and Beckman beam deflection test were performed to evaluate the treatment effect.To make sure,the subgrade was treated deeply enough,the Beckman beam deflection(L)was used as the controlled indicator among all the measured indexes for it was the hardest metric to meet.According to the design deflection and decreasing law of the measured deflections with the different number of the stabilized layers,the treatment depth was finally determined.As the PFWD test is superior to the deflection test in the detection efficiency,and the deflection value can be calculated from PFWD modulus by correlation formulas,thus the latter index can be used as a more suitable parameter for estimating the treatment depth instead of the former.Consequently,based on the measured PFWD moduli of the existing subgrade,six treatment schemes considering different treatment depths were proposed.It was confirmed that the method developed from this study is feasible and worth being extensively applied.展开更多
基金financially supported by the Fellowship of the China Postdoctoral Science Foundation(2021M703466)the Natural Science Foundation of Gansu Province,China(20JR10RA231)+1 种基金the Basic Research Innovation Group Project of Gansu Province,China(21JR7RA347)Special Funds for Guiding Local Scientific and Technological Development by the Central Government(22ZY1QA005)。
文摘The railway subgrades in the sandy areas act as an obstacle interfering wind-blown sand,causing sand erosion and sedimentation,which can disrupt the safe and stable operation of the railway system.Most previous studies mainly focus on the flow field around railway subgrades,however,the real erosion and sedimentation patterns are rarely studied.This study aims to analyze the erosion and sand sedimentation patterns of wind-blown sand over the subgrades with different heights and steel rails using the ratio of the wall shear stress to the critical value of erosion shear stress.Results show that wind erosion near the top of the upwind slope of the embankment and the shoulder on the upwind side are more severe,and the severity increases with an increase in the height of the embankment.With the increase of wind velocity,sand sedimentation both on the windward and leeside of the subgrade decreases and wind erosion by reverse flow occur.This study indicates that railways in sandy areas should be constructed with a moderate subgrade height(4 m).
文摘This study explores the coupling effect of pond ash(PA)and polypropylene(PP)fiber to control the strength and durability of expansive soil.The PA is used to chemically treat the expansive soil and PP fiber is adopted as reinforcement against tensile cracking.The sustainable use of PA and PP fiber are demonstrated by performing mechanical(i.e.unconfined compressive strength,split tensile strength and ultrasonic pulse velocity),chemical(pH value,electrical conductivity and calcite content),and microstructural analyses before and after 2nd,4th,6th,8th and 10th freezing-thawing(F-T)cycles.Three curing methods with 7 d,14 d and 28 d curing periods are considered to reinforce the 5%,10%,15%and 20%PA-stabilized expansive soil with 0.25%,0.5%and 1%PP fiber.In order to develop predictive models for mechanical and durability parameters,the experimental data are processed utilizing artificial neural network(ANN),in association with the leave-one-out cross-validation(LOOCV)as a resampling method and three different activation functions.The mechanical and durability properties of the PA-stabilized expansive soil subgrades are increased with PP fiber reinforcement.The results of ANN modeling predict the mechanical properties perfectly,and the correlation coefficient(R)approaches up to 0.96.
文摘With the rapid development of current social economy,China’s infrastructure construction is constantly increasing.The development of transportation industry and road structure which serve as infrastructure facility for the vehicles are fundamental aspect in economy growth.It’s not only convenience to people for travel,but also as a good foundation for the development of economy.Therefore,the quality of road construction is of great significance importance in the process of development.As technology advances,engineering construction is continuously expanding,especially in the road engineering sector.In this point,it’s necessary to impose strict quality control over related matters and ensure the quality and safety of municipal road construction.In the construction of municipal road engineering,one of the most important components is the compaction of subgrades and pavements,which requires more supervision.The compaction should match the requirements of road design and implement relevant work.
文摘The operation of a railway track in cold regions results in the premature deformation of subgrade soils caused by significant temperature fluctuations and ecological imbalance.Identification and calculation of the thawing degree of permafrost soils,frost heaving of clays,and groundwater flooding require careful engineering and geological surveying.The paper describes the unique,long-standing experience of the university scientists connected with maintaining the Russian EastSiberian and Trans-Baikal Railways'facilities.Specific features of and requirements for the surveying,depending on the geological and climatic conditions,are identified.
基金This research was supported by the Jiangsu Planned Projects for Postdoctoral Research Funds(2021K534 C)the Heilongjiang Natural Science Foundation(No.QC2017035).
文摘This study presents a numerical method based on the surface temperature data and the ground temperature increase in Daqing for predicting temperature field distribution in the Binzhou Railway subgrade and analyzing the temporal and spatial distribution of freeze−thaw status of railway subgrade.The calibrated numerical method is applied to simulate the temperature field distribution and roadbed vibrational response of the railway subgrade with a thermal insulation layer at different seasons.The results show the following:(1)The thermal insulation layer can remarkably increase the soil temperature below it and maximum frost depth in the subgrade.(2)Thermal insulation can effectively reduce the subgrade vibration and protect it from frost damage.(3)Given that the strength requirements are met,the insulation layer should be buried as shallow as possible to effectively reduce the subgrade vibration response.The research findings provide theoretical support for the frost damage prevention of railway subgrades in seasonally frozen regions.
基金supported by the National Natural Science Foundation of China for Distinguished Young Scholars(Grant No.42225206)National Natural Science Foundation of China(42207180,42477209,42302320).
文摘Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.
基金supported by the National Natural Science Foundation of China(Grant Nos.51978672 and 52308335)the Natural Science Funding of Hunan Province(Grant No.2023JJ41054)the Natural Science Research Project of Anhui Educational Committee(Grant No.2023AH051170)。
文摘Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring elements)is technically significant for the rational design of prestressed subgrade.A three-dimensional finite element model was established and verified based on a novel static model test and utilized to systematically analyze the influence of prestress levels and reinforcement modes on the reinforcement effect of the subgrade.The results show that the PRCs provide additional confining pressure to the subgrade through the diffusion effect of the prestress,which can therefore effectively improve the service performance of the subgrade.Compared to the unreinforced conventional subgrades,the settlements of prestressreinforced subgrades are reduced.The settlement attenuation rate(Rs)near the LPPs is larger than that at the subgrade center,and increasing the prestress positively contributes to the stability of the subgrade structure.In the multi-row reinforcement mode,the reinforcement effect of PRCs can extend from the reinforced area to the unreinforced area.In addition,as the horizontal distance from the LPPs increases,the additional confining pressure converted by the PSBs and LPPs gradually diminishes when spreading to the core load bearing area of the subgrade,resulting in a decrease in the Rs.Under the singlerow reinforcement mode,PRCs can be strategically arranged according to the local areas where subgrade defects readily occurred or observed,to obtain the desired reinforcement effect.Moreover,excessive prestress should not be applied near the subgrade shoulder line to avoid the shear failure of the subgrade shoulder.PRCs can be flexibly used for preventing and treating various subgrade defects of newly constructed or existing railway lines,achieving targeted and classified prevention,and effectively improving the bearing performance and deformation resistance of the subgrade.The research results are instructive for further elucidating the prestress reinforcement effect of PRCs on railway subgrades.
文摘Purpose–Salt rock from salt lakes can serve as a cost-effective material for subgrade filling,as demonstrated in projects like the Qarhan Salt Lake section of the Qinghai-Tibet Railway and the Qarhan Salt Lake section of the G215 Highway.This state-of-the-art paper aims to summarize the engineering properties of salt rock filling and present the advances of its utilization.Design/methodology/approach–This paper collects and analyzes laboratory and field data of salt rock filling from previous studies to present a comprehensive analysis of the engineering properties and utilization of salt rock fillings.Findings–Salt rock primarily contains minerals such as halite and glauberite,which contribute to its unique phase-changing behavior under varying environmental conditions,impacting its mechanical properties.Salt rock filling shrinks when in contact with vapor or unsaturated brine and expands under cooling or evaporation.Its use is particularly recommended for arid regions,with specific restrictions depending on the structure type.This paper discusses suggested countermeasures to mitigate these issues,as well as key quality acceptance indices for salt rock filling compaction.Moisture content after air-drying is recommended as a crucial parameter for construction quality control.Originality/value–This review aims to support future research and engineering practices in salt rock subgrade applications.
基金supported by the Third Xinjiang Scientific Expedition and Research Program-Investigation and Risk Assessment of Drought and Aeolian Disasters in Tarim River Basin(No.2021xjkk0300)the National Natural Science Foundation of China(No.62466056)the subject of'the technical scheme and application demonstration of sand disaster prevention and control of Xinjiang expressway to engineering practice,Xinjiang Transportation Investment(Group)Co.,Ltd.(No.XJJTZKX-FWCG-202401-0043).
文摘To mitigate the sand burial of highways in sandy regions,a separated subgrade design was widely adopted in the embankments of high-grade highways,but the problem of sand deposition on subgrade slopes and pavements still happens frequently.Based on the theory of wind-sand two-phase flow,this paper constructed a three-dimensional model of the separated subgrade,the wind-sand flow transport law around the subgrade with varying median strip widths and concave depths was simulated by Fluent software.After comparison and analysis of seven subgrade models,the flow field distribution,wind speed horizontal variation,and erosion-deposition characteristics were investigated.The findings are as follows:(1)The width of the median strip in the separated subgrade had significant influences on the wind-sand flow.The smooth passage of wind-sand flow over the road surface was facilitated with the increase of the median strip width.However,sand deposition in the median strip happened.It can lead to secondary sand damage of downwind subgrade and increase the work load of road sand removal for subsequent maintenance.(2)The obstruction to airflow and sand accumulation was aggravated with greater concave depth of the median strip.Therefore,it is advisable to minimize the concave depth of the median strip in case of more sand damage.(3)A median strip width exceeding 12 m(possibly without guardrails)for an integral embankment without enough road land is recommended.Conversely,median strip width of over 40 m for separate subgrade with unrestricted land is suggested.(4)In the case of sand deposition in the existing separated subgrade,the median strip can be filled by sand deposition or other materials,then was covered with gravel to form a flat ground like Gobi smooth surface,which can let the wind-blown sand flow pass through the subgrade section without sand deposition.
基金Science and Technology Major Project of Xinjiang Uygur Autonomous Region(2020A03003-7)Fundamental Research on Natural Science Program of Shaanxi Province(2021JM-180)+2 种基金Fundamental Research Funds for the Central Universities,CHD(Project for Leading Talents)(300102211302)Tianshan Cedar Plan of Science and Technology Department of Xinjiang Uygur Autonomous Region(2017XS13)Shaanxi Province Young Talent Lifting Program(CLGC202219).
文摘When the expressway crosses the goafs inevitably,the design is generally to build the road on coal pillars as much as possible.However,the existing coal pillars are often unable to meet relevant requirements of highway construction.Combining three-dimensional physical model tests,numerical simulations and field monitoring,with the Urumqi East Second Ring Road passing through acute inclined goafs as a background,the deformation and failure mechanism of the overlying rock and coal pillars in acute inclined goafs under expressway load were studied.And in accordance with construction requirements of subgrade,comprehensive consideration of the deformation and instability mechanism of acute inclined goafs,the treatment measures and suggestions for this type of geological disasters were put forward.The research results confirmed the rationality of coal pillars in acute inclined goafs under the expressway through grouting.According to the ratio of diff erent overlying rock thickness to coal pillar height,the change trend and value of the required grouting range were summarized,which can provide reference for similar projects.
基金supported by the Australian Research Council Training Centre for Whole Life Design of Carbon Neutral Infrastructure(Grant No.IC230100015).
文摘Biochar,a solid carbonaceous material produced by heating biomass in oxygen-free or low-oxygen conditions(pyrolysis),has been used in various applications,including wastewater treatment,carbon sequestration,and improving soil fertility.However,very limited research has been performed to explore its feasibility to improve the expansive clay(EC)subgrade.In this study,fine-grained wood biochar derived from wood waste was used to stabilise and enhance the mechanical performance of the EC as road subgrade.A comprehensive series of geotechnical tests,including unconfined compressive strength(UCS),California bearing ratio(CBR),repeated load triaxial(RLT),and swelling-shrinkage tests,were conducted to investigate the engineering properties of expansive clay mixed with different contents of the fine-grained biochar(FGB)(i.e.0,1%,2%,3%,and 4%by weight of dry soil).Furthermore,X-ray diffraction(XRD),X-ray fluorescence(XRF),X-ray micro-CT,and thermogravimetric analysis(TGA)analyses were performed to study the microchemical modification of the EC-FGB mixtures.The results showed that adding FGB reduced the swelling and shrinkage potential while enhancing the mechanical properties of the EC.The micro-level analysis also supported the enhancement of the geotechnical performance of the EC resulting from the incorporation of FGB.According to the test results,2%FGB was considered the optimum content,increasing UCS,CBR,and resilient modulus by 31.1%,24.1%,and 31.5%,respectively,and decreasing the swell-shrinkage index by 7%.
文摘Purpose–The deformation of the roadbed is easily influenced by the external environment to improve the accuracy of high-speed railway subgrade settlement prediction.Design/methodology/approach–A high-speed railway subgrade settlement interval prediction method using the secretary bird optimization(SBOA)algorithm to optimize the BP neural network under the premise of gray relational analysis is proposed.Findings–Using the SBOA algorithm to optimize the BP neural network,the optimal weights and thresholds are obtained,and the best parameter prediction model is combined.The data were collected from the sensors deployed through the subgrade settlement monitoring system,and the gray relational analysis is used to verify that all four influencing factors had a great correlation to the subgrade settlement,and the collected data are verified using the model.Originality/value–The experimental results show that the SBOA-BP model has higher prediction accuracy than the BP model,and the SBOA-BP model has a wider range of prediction intervals for a given confidence level,which can provide higher guiding value for practical engineering applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.52038005 and 52278342)the Natural Science Foundation of Tianjin Municipal(Grant No.23JCJQJC00160).
文摘Real-time assessment of subgrade compaction quality poses a significant challenge in the implementation of intelligent compaction(IC).Current compaction evaluation models are confined to specific scenarios and lack robustness.This study proposes a subgrade compaction strategy that utilizes a heterogeneous dataset to estimate compaction quality across diverse scenarios while maintaining model accuracy.Field compaction tests are conducted in four distinct scenarios,considering various construction parameters.Compaction models are developed using several machine learning algorithms.The datasets are thoroughly assessed in terms of quality,diversity and similarity.The proposed model exhibits good performance in new scenarios by incorporating an additional 5%e8%of new data for retraining.The model's generalization capability is enhanced by conducting a limited number of field tests,which are labor-saving and time-efficient.The model's accuracy consistently improves across diverse scenarios and optimal algorithms.The proposed compaction strategy adopts a physics-and-data dual-driven approach,aimed at practical engineering applications and guiding the compaction procedure.
基金support for this research from the Fundamental Research Funds for the National Natural Science Foundation of China (Grant Nos. 51978588, 52078434, and 52368065)the China Scholarship Council (Grant No. 202107000077)UKRI Engineering and Physical Science ResearchCouncil (EPSRC) for the financial sponsorship of Re4Rail project (Grant No. EP/Y015401/1)
文摘Foamed concrete has been used to address the issue of differential settlement in high-speed railway subgrades in China.However,to enhance crack resistance,reinforcement is still necessary,and further research is required to better understand the performance of foamed concrete in subgrade applications.To this end,a series of tests—including uniaxial compres-sive and dynamic triaxial tests—were conducted to comprehensively examine the effects of basalt fiber reinforcement on the mechanical properties of foamed concrete with densities of 700 and 1000 kg/m3.Additionally,a full-scale model of the foamed concrete subgrade was established,and simulated loading was applied.The diffusion patterns of dynamic stress and dynamic acceleration within the subgrade were explored,leading to the development of experimental formulas to calculate the attenuation coefficients of these two parameters along the depth and width of the subgrade.Furthermore,the dynamic displacement and cumulative settlement were analyzed to evaluate the stability of the subgrade.These findings provide valuable insights for the design and construction of foamed concrete subgrades in high-speed rail systems.The outcomes are currently under consideration for inclusion in the code of practice for high-speed rail restoration.
基金supported by Science and Technology Research and Development Program Project of China State Railway Group Co.,Ltd.(award number:K2024X010).
文摘Purpose–This paper conducts a joint analysis of monitoring data in the hidden danger areas of railway subgrade deformation using a data-driven method,thereby realizing the systematic risk identification of regional hidden dangers.Design/methodology/approach–The paper proposes a regional systematic risk identification method based on Bayesian and independent component analysis(ICA)theories.Firstly,the Gray Wolf Optimization(GWO)algorithm is used to partition each group of monitoring data in the hidden danger area,so that the data distribution characteristics within each sub-block are similar.Then,a distributed ICA early warning model is constructed to obtain prior knowledge such as control limits and statistics of the area under normal conditions.For the online evaluation process,the input data is partitioned following the above-mentioned procedure and the ICA statistics of each sub-block are calculated.The Bayesian method is applied to fuse online parameters with offline parameters,yielding statistics under a specific confidence interval.These statistics are then compared with the control limits–specifically,checking whether they exceed the pre-set confidence parameters–thus realizing the systematic risk identification of the hidden danger area.Findings–Through simulation experiments,the proposed method can integrate prior knowledge such as control limits and statistics to effectively determine the overall stability status of the area,thereby realizing the systematic risk identification of the hidden danger area.Originality/value–The proposed method leverages Bayesian theory to fuse online process parameters with offline parameters and further compares them with confidence parameters,thereby effectively enhancing the utilization efficiency of monitoring data and the robustness of the analytical model.
基金funded by the National Key R&D Program“Transportation Infrastructure”project(No.2022YFB2603400)the Technology Research and Development Plan Program of China State Railway Group Co.,Ltd.(No.Q2024T001)the National project pre research project of Suzhou City University(No.2023SGY019).
文摘Purpose-The indoor vibration compaction test(IVCT)was a key step in controlling the compaction quality for high-speed railway graded aggregate(HRGA),which currently had a research gap on the assessment indicators and compaction parameters.Design/methodology/approach-To address these issues,a novel multi-indicator IVCT method was proposed,including physical indicator dry density(ρd)and mechanical indicators dynamic stiffness(Krb)and bearing capacity coefficient(K20).Then,a series of IVCTs on HRGA under different compaction parameters were conducted with an improved vibration compactor,which could monitor the physical-mechanical indicators in real-time.Finally,the optimal vibration compaction parameters,including the moisture content(ω),the diameter-to-maximum particle size ratio(Rd),the thickness-to-maximum particle size ratio(Rh),the vibration frequency(f),the vibration mass(Mc)and the eccentric distance(re),were determined based on the evolution characteristics for the physical-mechanical indicators during compaction.Findings-All results indicated that theρd gradually increased and then stabilized,and the Krb initially increased and then decreased.Moreover,the inflection time of the Krb was present as the optimal compaction time(Tlp)during compaction.Additionally,optimal compaction was achieved whenωwas the water-holding content after mud pumping,Rd was 3.4,Rh was 3.5,f was the resonance frequency,and the ratio between the excitation force and the Mc was 1.8.Originality/value-The findings of this paper were significant for the quality control of HRGA compaction.
基金supported by the major project of China State Railway Group Co.,Ltd.(No.Q2023G020)the internal project of China Railway Design Cooperation(No.2023A0248002).
文摘Purpose-Conventional high-speed railways(HSR)subgrade design methods remain constrained by platformdependent drafting systems,leading to data interaction hindrances and redundant design processes.This study strives to develop a digital earthwork design methodology that enhances design while reducing collaborative expenses.Design/methodology/approach-A novel digital subgrade design approach,utilizing sophisticated analysis and modeling tools customized for different subgrade elements,is put forward in this study.The methodology incorporates the following essential steps:(1)the advancement of digital analysis and modeling techniques for diverse subgrade components,including surfaces,filling,slopes,retaining structures,and foundation treatments;(2)the formulation of a digital design principle repository incorporating various slope protection combinations;(3)the establishment of a comprehensive digital design framework and process for subgrade cross-sections;and(4)the development and implementation of an open-source digital design system.Findings-The proposed method liberates subgrade design from the constraints of conventional drawing platforms,elevating efficiency,intelligence,and flexibility.The open software architecture and code have achieved over 60%efficiency gains in design workflows during its deployment on three major high-speed rail projects:the Baotou-Yinchuan HSR corridor,Shenyang-Baihe HSR network,and Weifang-Yantai HSR system.Originality/value-This paper introduces an innovative digital design methodology that enables modular and parametric design for railway subgrade sections.The proposed approach provides a digital base for the intelligent design and maintenance of the next-generation high-speed railway.
基金The authors express their gratitude to the financial support from National Key R&D Program of China(No.2023YFB2604001)National Natural Science Foundation of China(No.52478475,No.52378463 and No.52168066).
文摘The pile-plate structure has proven highly effective support for high-speed railway subgrades,particularly in poor geological conditions.Although its efficacy in non-frozen regions is well-established,its potential in frozen regions remains underexplored.In seasonally frozen areas,F-T(freeze-thaw)cycles threaten subgrade stability,necessitating research on pile-plate structure’s behavior under such conditions.To address this challenge,a scaled model experiment was conducted on a silty sand foundation,simulating F-T cycles using temperature control devices.Key parameters,including soil temperature,frozen depth,and displacement,were systematically monitored.Results indicate that the bearing plate functions as an effective insulation layer,significantly reducing sub-zero temperature penetration.Additionally,the anchoring action of the piles mitigates frost heave in the foundation soil,while the plate middle restrains soil deformation more effectively due to increased constraint.The thermal insulation provided by the plate maintains higher soil temperatures,delaying the onset of freezing.By the end of each freezing stage,the vertical displacement in the natural subgrade is approximately 4 times greater than that beneath the pile-plate structure.Furthermore,the frost depth is about 1.3-1.4 times and 1.6-4.9 times greater than that measured below the plate edge and middle,respectively.These insights contribute to the development of more resilient designs for high-speed railway subgrades in seasonally frozen regions,offering engineers a robust,scientifically-backed foundation for future infrastructure projects.
文摘The sustainable geotechnical approach for addressing the challenges associated with clayey soils at construction sites involves the modification of these soils’mechanical and chemical characteristics using soil enhancement methods.The present study investigates the coupling effect of sandstone slurry waste(SSW)and calcium carbonate nanoparticle(CCN)as potential stabilizers to enhance the characteristics of clayey soil.A comprehensive investigation was conducted using compaction tests,plasticity index(PI)tests,California bearing ratio(CBR)tests,unconfined compressive strength(UCS)tests,and microstructural analyses of clayey soil,SSW and SSW-CCN-treated clay samples containing 5%,10%,15%,20%,25%,30%,and 35%SSW and 0.3%,0.6%,0.9%,1.2%,and 1.5%CCN mixed with clayey soil in different combinations of clay,SSW,and CCN.The findings reveal that incorporating 25%SSW with 0.9%CCN into clay soil results in an increase in the UCS from 132.2 kPa for untreated clayey soil without curing to 263 kPa after a 28-d curing period.Similarly,a rising trend in CBR results is observed up to 25%SSW addition in clay soil and up to 0.9%CCN addition in SSW-clay mixture.Initially,notable enhancements in UCS were attributed to a denser soil structure,followed by the formation of calcium–silicate–hydrate(CSH)gel,which intensified with prolonged curing.Gel patches were detected by scanning electron microscopy(SEM)in addition to particle aggregation.The results obtained from thermogravimetric analysis,Fourier transform infrared spectroscopy(FTIR),and X-ray diffraction(XRD)supported the presence of hydration products such as CSH.The experimental study indicates that SSW,in combination with CCN,offers a sustainable alternative to traditional soil stabilizers.
基金the financial support offered by the National Key Research and Development Program of China(2017YFC0805307)the National Natural Science Foundation of China(51878078,51911530215,51838001,51878070)+6 种基金the Excellent Youth Foundation of Natural Science Foundation of Hunan Province(2018JJ1026)the Key Project of Education Department of Hunan Province(17A008)This work was also supported by the Key Project of Open Research Fund of National Engineering Laboratory of Highway Maintenance Technology(kfj150103)the Open Fund of Engineering Research Center of Catastrophic Prophylaxis and Treatment of Road&Traffic Safety of Ministry of Education(Changsha University of Science&Technology)(kfj170404)Open Research Fund of National Engineering Laboratory of Highway Maintenance Technology,Changsha University of Science&Technology(kfj170104)Graduate Research Innovation Project of Hunan Province(CX20190644)Training Program for High-level Technical Personnel in Transportation Industry(2018-025).
文摘Based on a highway reconstruction project in southern China,this study aims to put forward a method to determine the proper treatment depth of the existing subgrade.First,some field tests including the Beckman beam deflection test and portable falling weight deflectometer(PFWD)test were carried out.The results showed that there was a good correlation between the Beckman beam deflection(L)and PFWD modulus(Ep).Subsequently,a subgrade section was excavated and backfilled with cement-stabilized soil in layers.Compaction test,dynamic cone penetrometer rate test,plate load test and Beckman beam deflection test were performed to evaluate the treatment effect.To make sure,the subgrade was treated deeply enough,the Beckman beam deflection(L)was used as the controlled indicator among all the measured indexes for it was the hardest metric to meet.According to the design deflection and decreasing law of the measured deflections with the different number of the stabilized layers,the treatment depth was finally determined.As the PFWD test is superior to the deflection test in the detection efficiency,and the deflection value can be calculated from PFWD modulus by correlation formulas,thus the latter index can be used as a more suitable parameter for estimating the treatment depth instead of the former.Consequently,based on the measured PFWD moduli of the existing subgrade,six treatment schemes considering different treatment depths were proposed.It was confirmed that the method developed from this study is feasible and worth being extensively applied.
