The aim of the present study is to improve the capabilities and precision of a recently introduced Sea Surface Acoustic Simulator(SSAS) developed based on optimization of the Helmholtz–Kirchhoff–Fresnel(HKF) method....The aim of the present study is to improve the capabilities and precision of a recently introduced Sea Surface Acoustic Simulator(SSAS) developed based on optimization of the Helmholtz–Kirchhoff–Fresnel(HKF) method. The improved acoustic simulator, hereby known as the Modified SSAS(MSSAS), is capable of determining sound scattering from the sea surface and includes an extended Hall–Novarini model and optimized HKF method. The extended Hall–Novarini model is used for considering the effects of sub-surface bubbles over a wider range of radii of sub-surface bubbles compared to the previous SSAS version. Furthermore, MSSAS has the capability of making a three-dimensional simulation of scattered sound from the rough bubbly sea surface with less error than that of the Critical Sea Tests(CST) experiments. Also, it presents scattered pressure levels from the rough bubbly sea surface based on various incident angles of sound. Wind speed, frequency, incident angle, and pressure level of the sound source are considered as input data, and scattered pressure levels and scattering coefficients are provided. Finally, different parametric studies were conducted on wind speeds, frequencies, and incident angles to indicate that MSSAS is quite capable of simulating sound scattering from the rough bubbly sea surface, according to the scattering mechanisms determined by Ogden and Erskine. Therefore, it is concluded that MSSAS is valid for both scattering mechanisms and the transition region between them that are defined by Ogden and Erskine.展开更多
In this study,the dynamic characteristics of microscale floating bubbles near the vertical wall are studied.This occurrence is common in industrial and natural phenomena.Although many studies have been conducted on mi...In this study,the dynamic characteristics of microscale floating bubbles near the vertical wall are studied.This occurrence is common in industrial and natural phenomena.Although many studies have been conducted on microscale bubbles,few studies investigate floating bubbles with very small Reynolds number(Re)near the wall,which is the main research goal of this study.Therefore,this study establishes a model for the ascent of small-scale bubbles near a vertical wall using the interFoam solver in OpenFOAM.This study investigates the influences of diverse viscosity parameters,varying distances from the wall,and different gas flow rates on the terminal velocity,deformation,and motion trajectory of bubbles.The results reveal that as liquid viscosity increases,the Re of bubbles gradually decreases and reaches a minimum of 0.012,which is similar to the Re of micrometer-sized bubbles in water.The characteristics of the wall-induced force in the longitudinal direction are closely related to the changes in liquid viscosity.Under low-viscosity conditions,the induced lift is the principal form of action,whereas under high-viscosity conditions,it is primarily manifested as induced drag.展开更多
This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow con...This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.展开更多
Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath...Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.展开更多
350 keV He^(+) ions were injected into laser powder bed fusion(LPBF)-processed 304L stainless steel and traditional rolled 304L stainless steel with a flux of 1×10^(17) ions/cm^(2) at room temperature,followed by...350 keV He^(+) ions were injected into laser powder bed fusion(LPBF)-processed 304L stainless steel and traditional rolled 304L stainless steel with a flux of 1×10^(17) ions/cm^(2) at room temperature,followed by annealing at 750℃ for 10,100,and 300 h,respectively.The results showed that material swelling due to helium bubble coarsening was almost not observed in either the LPBF or rolled samples after 10 h of annealing duration.Rapid coarsening and swelling of bubbles occurred in the rolled samples,but only moderate bubble growth occurred in the LPBF sample after annealing for 100 h.After annealing for 300 h,the helium bubbles in both samples tended to grow steadily.For 10 h of annealing,the irradiated samples were in a disequilibrium state,and the apparent activation energy(E^(act))calculated by the Arrhenius model determined that helium atoms tended to diffuse through the displacement mechanism,and helium bubbles grew under the migration and coalescence(MC)mechanism.With annealing times over 100 h,the high-density dislocations and nano-oxide particles in the LPBF sample still had a strong trapping effect on the movement and growth of helium bubbles.After annealing for 300 h,the cellular subgrains in the LPBF sample decomposed,and the nano-oxide particles had no trapping effect on the helium bubbles.At this time,the dislocation structure played a primary role in suppressing the growth of helium bubbles,and the radiation resistance of the LPBF sample remained superior to that of the rolled samples.展开更多
The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab b...The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.展开更多
The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,an...The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,and the evolution characteristics and underlying mechanisms are elucidated.The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later.The damage evolution is completely controlled by the expansion-merging of He bubbles,without nucleation–growth of voids.This new damage region can be divided into two sections,each of which exhibits a unique dominant mechanism.The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave,depending on the rate of decrease and the amplitude of the initial peak pressure.A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region,since a significant reverse velocity gradient can only be established if melting occurs.The dominant mechanism in the section distant from the loading side is the action of tensile stress,associated with the profile of the incident shock wave upon reaching the free surface,which determines the material phase near the free surface.Moreover,the presence of He bubbles is another critical factor for formation of the new damage region,which does not occur in pure Al samples.展开更多
In this paper,the failure caused by HRAM loads which were generated by high-speed projectile penetration,and protection technology of the fluid-filled structure were explored.A bubble was preset on the projectile traj...In this paper,the failure caused by HRAM loads which were generated by high-speed projectile penetration,and protection technology of the fluid-filled structure were explored.A bubble was preset on the projectile trajectory in a fluid-filled structure.Based on the reflection and transmission phenomena of pressure waves at the gas-liquid interface and the compressibility characteristics of gases,a numerical analysis was conducted on the influence of preset bubble on projectile penetration and structural failure characteristics.The results indicate that the secondary water-entry impact phenomenon occurs when a preset bubble exists on the projectile trajectory,leading to the secondary water entry impact loads.The rarefaction waves reflected on the surface of the preset bubble cause the attenuation ratio of the initial impact pressure peak to reach 68.8%and the total specific impulse attenuation ratio to reach 48.6%.Furthermore,the larger the bubble,the faster the projectile,and the more obvious the attenuation effect.Moreover,due to the compressibility of the bubble,the global deformation attenuation ratio of the front and rear walls can reach over 80%.However,the larger the bubble size,the faster the projectile velocity,the smaller the local deformation attenuation effect of the rear wall,and the more severe the failure at the perforation of the rear wall.展开更多
This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signa...This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signals and degrade positioning accuracy.Managed by the Indonesian Geospatial Information Agency(BIG),the Indonesia Continuously Operating Reference Station(Ina-CORS)network comprises over 300 GNSS receivers spanning equatorial to southern low-latitude regions.Ina-CORS is uniquely situated to monitor EPB generation,zonal drift,and dissipation across Southeast Asia.We provide a practical tool for EPB research,by sharing two-dimensional rate of Total Electron Content(TEC)change index(ROTI)derived from this network.We generate ROTI maps with a 10-minute resolution,and samples from May 2024 are publicly available for further scientific research.Two preliminary findings from the ROTI maps of Ina-CORS are noteworthy.First,the Ina-CORS ROTI maps reveal that the irregularities within a broader EPB structure persist longer,increasing the potential for these irregularities to migrate farther eastward.Second,we demonstrate that combined ROTI maps from Ina-CORS and GNSS receivers in East Asia and Australia can be used to monitor the development of ionospheric irregularities in Southeast and East Asia.We have demonstrated the combined ROTI maps to capture the development of ionospheric irregularities in the Southeast/East Asian sector during the G5 Geomagnetic Storm on May 11,2024.We observed simultaneous ionospheric irregularities in Japan and Australia,respectively propagating northwestward and southwestward,before midnight,whereas Southeast Asia’s equatorial and low-latitude regions exhibited irregularities post-midnight.By sharing ROTI maps from Indonesia and integrating them with regional GNSS networks,researchers can conduct comprehensive EPB studies,enhancing the understanding of EPB behavior across Southeast and East Asia and contributing significantly to ionospheric research.展开更多
In recent years,the phenomenon of multistability has attracted wide attention.In this paper,a memristive chaotic system with extreme multistability is constructed by using a memristor.The dynamic behavior of the syste...In recent years,the phenomenon of multistability has attracted wide attention.In this paper,a memristive chaotic system with extreme multistability is constructed by using a memristor.The dynamic behavior of the system is analyzed by Poincar´e mapping,a time series diagram,and a bifurcation diagram.The results show that the new system has several significant characteristics.First,the new system has a constant Lyapunov exponent,transient chaos and one complete Feigenbaum tree.Second,the system has the phenomenon of bifurcation map shifts that depend on the initial conditions.In addition,we find periodic bursting oscillations,chaotic bursting oscillations,and the transition of chaotic bursting oscillations to periodic bursting oscillations.In particular,when the system parameters take different discrete values,the system generates a bubble phenomenon that varies with the initial conditions,and this bubble can be shifted with the initial values,which has rarely been seen in the previous literature.The implementation by field-programmable gate array(FPGA)and analog circuit simulation show close alignment with the MATLAB numerical simulation results,validating the system’s realizability.Additionally,the image encryption algorithm integrating DNA-based encoding and chaotic systems further demonstrates its practical applicability.展开更多
Bubbles play crucial roles in various fields,including naval and ocean engineering,chemical engineering,and biochemical engineering.Numerous theoretical analyses,numerical simulations,and experimental studies have bee...Bubbles play crucial roles in various fields,including naval and ocean engineering,chemical engineering,and biochemical engineering.Numerous theoretical analyses,numerical simulations,and experimental studies have been conducted to reveal the mysteries of bubble motion and its mechanisms.These efforts have significantly advanced research in bubble dynamics,where theoretical study is an efficient method for bubble motion prediction.Since Lord Rayleigh introduced the theoretical model of single-bubble motion in incompressible fluid in 1917,theoretical studies have been pivotal in understanding bubble dynamics.This study provides a comprehensive review of the development and applicability of theoretical studies in bubble dynamics using typical theoretical bubble models across different periods as a focal point and an overview of bubble theory applications in underwater explosion,marine cavitation,and seismic exploration.This study aims to serve as a reference and catalyst for further advancements in theoretical analysis and practical applications of bubble theory across marine fields.展开更多
Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show ...Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.展开更多
To analyze the impact of bubbles on the mechanical behavior of glasses,by controlling the refining time,we prepared three borosilicate glasses with the same composition and different porosity.By the analysis software ...To analyze the impact of bubbles on the mechanical behavior of glasses,by controlling the refining time,we prepared three borosilicate glasses with the same composition and different porosity.By the analysis software integrated within the optical microscope,the diameter and number of the bubbles on the surface of three borosilicate glasses were quantified.From the hardness and crack initiation resistance(CR),we built the relationship between the porosity and the mechanical performance of these borosilicate glasses.展开更多
During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a rest...During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.展开更多
Laser powder bed fusion(LPBF)is used to fabricate complex-shaped,dense,and high-performance oxide ceramics.During LPBF,bubbles form and evolve in the melt pool and ultimately remain in the printed ceramics as pores,wh...Laser powder bed fusion(LPBF)is used to fabricate complex-shaped,dense,and high-performance oxide ceramics.During LPBF,bubbles form and evolve in the melt pool and ultimately remain in the printed ceramics as pores,which significantly degrade the mechanical properties.Therefore,it is essential to understand the bubble behaviors during LPBF.Herein,we conducted an in-situ investigation of the bubble dynamics in the melt pool of homogeneously mixed Al_(2)O_(3)-Y_(2)O_(3) powders using synchrotron high-speed X-ray imaging.The formation,growth,motion,and evolution of bubbles,as well as the relationship between the instability of melt flow and bubble rupture during LPBF,were elucidated.The findings reveal that bubbles from the interstices within the powder bed grow following three distinct modes,i.e.,uplift growth,gas channel attachment,and bubble coalescence.Furthermore,melt flow oscillations caused by the bursting of large bubbles can lead to local instability of the melt pool.Results from this study enhance the understanding of bubble dynamics during LPBF and may provide valuable insights for pore elimination in LPBF-processed oxide ceramics.展开更多
In nature,cavitation bubbles typically appear in clusters,engaging in interactions that create a variety of dynamicmotion patterns.To better understand the behavior ofmultiple bubble collapses and the mechanisms of in...In nature,cavitation bubbles typically appear in clusters,engaging in interactions that create a variety of dynamicmotion patterns.To better understand the behavior ofmultiple bubble collapses and the mechanisms of interbubble interaction,this study employs molecular dynamics simulation combined with a coarse-grained force field.By focusing on collapsemorphology,local density,and pressure,it elucidates how the number and arrangement of bubbles influence the collapse process.The mechanisms behind inter-bubble interactions are also considered.The findings indicate that the collapse speed of unbounded bubbles located in lateral regions is greater than that of the bubbles in the center.Moreover,it is shown that asymmetrical bubble distributions lead to a shorter collapse time overall.展开更多
The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurren...The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurrent flow in annulus is carried out under different working conditions to reveal how the wellbore inclination angle,liquid phase property and countercurrent liquid velocity affect the bubble deformation and bubble migration trajectory/velocity,and to establish a bubble migration velocity prediction model.The bubbles in the countercurrent flow mainly migrate in two modes:free rising of isolated bubbles,and interactive rising of multiple bubbles.The bubbles migrate by an S-shaped trajectory in the countercurrent flow.With the increase of countercurrent liquid velocity,the lateral oscillation of bubbles is intensified.The increases of wellbore inclination angle,liquid density and liquid viscosity make the bubble migration trajectory gradually to be linear.The bubble is generally ellipsoidal during its rising.The wellbore inclination angle has little effect on the degree of bubble deformation.The bubbles are ellipsoidal during rising,with little influence of wellbore inclination angle on bubble deformation.With the increase of liquid viscosity and density,the aspect ratio of the bubble decreases.As the wellbore inclination angle increases,the bubble migration velocity gradually decreases.As the liquid viscosity increases,the bubble migration velocity decreases.As the liquid density increases,the bubble migration velocity increases slightly.The established bubble migration velocity prediction model yields errors within±15%,and demonstrates broad applicability across a wide range of operating conditions.展开更多
Bubbles within an elastic shell,which undergo ultrasound-driven oscillation to treat tumors and soft tissues,are frequently treated as viscoelastic media.Therefore,studying the dynamic behavior of bubbles wrapped in a...Bubbles within an elastic shell,which undergo ultrasound-driven oscillation to treat tumors and soft tissues,are frequently treated as viscoelastic media.Therefore,studying the dynamic behavior of bubbles wrapped in a viscoelastic medium while considering an elastic shell can provide theoretical support for ultrasound biotherapy.Bubbles are always in the form of clusters.Therefore,a model of spherical bubble clusters in a liquid cavity wrapped by an elastic shell was constructed,the coupled oscillation equations of bubbles were obtained by taking into account the dynamic effects of the elastic shell and the viscoelastic media outside the cavity,and the oscillation behaviors of the bubbles were analyzed.Acoustic waves at 1.5 MHz could cause bubbles with a radius of 1μm to resonate.Increasing the number of bubbles increased the suppressing effect of bubble oscillation caused by bubble interaction.The bubble cluster oscillation caused the elastic shell to oscillate and be stressed,and the stress trend was the inverse of the bubble oscillation trend with maximal tensile and compressive stresses.Bubbles with an equilibrium radius of 2μm exhibited the lowest inertial cavitation threshold,making inertial cavitation more likely under high-frequency acoustic excitation.The inertial cavitation threshold of bubbles was heavily influenced by the acoustic wave frequency,bubble number density,and bubble cluster radius.The nonspherical oscillation stability of bubbles was primarily affected by the driving acoustic pressure amplitude and frequency,bubble initial radius,bubble number density,and bubble cluster radius.The acoustic frequency and amplitude exhibited a synergistic effect,with a minimum unstable driving acoustic pressure threshold of approximately 0.13 MPa.The initial radius within the elastic shell affected the minimum unstable driving acoustic pressure threshold.展开更多
文摘The aim of the present study is to improve the capabilities and precision of a recently introduced Sea Surface Acoustic Simulator(SSAS) developed based on optimization of the Helmholtz–Kirchhoff–Fresnel(HKF) method. The improved acoustic simulator, hereby known as the Modified SSAS(MSSAS), is capable of determining sound scattering from the sea surface and includes an extended Hall–Novarini model and optimized HKF method. The extended Hall–Novarini model is used for considering the effects of sub-surface bubbles over a wider range of radii of sub-surface bubbles compared to the previous SSAS version. Furthermore, MSSAS has the capability of making a three-dimensional simulation of scattered sound from the rough bubbly sea surface with less error than that of the Critical Sea Tests(CST) experiments. Also, it presents scattered pressure levels from the rough bubbly sea surface based on various incident angles of sound. Wind speed, frequency, incident angle, and pressure level of the sound source are considered as input data, and scattered pressure levels and scattering coefficients are provided. Finally, different parametric studies were conducted on wind speeds, frequencies, and incident angles to indicate that MSSAS is quite capable of simulating sound scattering from the rough bubbly sea surface, according to the scattering mechanisms determined by Ogden and Erskine. Therefore, it is concluded that MSSAS is valid for both scattering mechanisms and the transition region between them that are defined by Ogden and Erskine.
基金Supported by the National Natural Science Foundation of China(Grant No.52271319)the Jiangsu Funding Program for Excellent Postdoctoral Talent,and the Postdoctoral Fellowship Program of China Postdoctoral Science Foundation(Grant No.GZC20240618)the Natural Science Foundation of Jiangsu Province of China(BK20231525).
文摘In this study,the dynamic characteristics of microscale floating bubbles near the vertical wall are studied.This occurrence is common in industrial and natural phenomena.Although many studies have been conducted on microscale bubbles,few studies investigate floating bubbles with very small Reynolds number(Re)near the wall,which is the main research goal of this study.Therefore,this study establishes a model for the ascent of small-scale bubbles near a vertical wall using the interFoam solver in OpenFOAM.This study investigates the influences of diverse viscosity parameters,varying distances from the wall,and different gas flow rates on the terminal velocity,deformation,and motion trajectory of bubbles.The results reveal that as liquid viscosity increases,the Re of bubbles gradually decreases and reaches a minimum of 0.012,which is similar to the Re of micrometer-sized bubbles in water.The characteristics of the wall-induced force in the longitudinal direction are closely related to the changes in liquid viscosity.Under low-viscosity conditions,the induced lift is the principal form of action,whereas under high-viscosity conditions,it is primarily manifested as induced drag.
基金the Scientific Research Projects Unit of Erciyes University under contract no:FDS-2022-11532 and FOA-2025-14773.
文摘This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.
基金supported by the National Natural Science Foundation of China(Grant No.52374317).
文摘Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.
基金supported by the National Natural Science Foundation of China(Nos.U22B2067 and 52073176).
文摘350 keV He^(+) ions were injected into laser powder bed fusion(LPBF)-processed 304L stainless steel and traditional rolled 304L stainless steel with a flux of 1×10^(17) ions/cm^(2) at room temperature,followed by annealing at 750℃ for 10,100,and 300 h,respectively.The results showed that material swelling due to helium bubble coarsening was almost not observed in either the LPBF or rolled samples after 10 h of annealing duration.Rapid coarsening and swelling of bubbles occurred in the rolled samples,but only moderate bubble growth occurred in the LPBF sample after annealing for 100 h.After annealing for 300 h,the helium bubbles in both samples tended to grow steadily.For 10 h of annealing,the irradiated samples were in a disequilibrium state,and the apparent activation energy(E^(act))calculated by the Arrhenius model determined that helium atoms tended to diffuse through the displacement mechanism,and helium bubbles grew under the migration and coalescence(MC)mechanism.With annealing times over 100 h,the high-density dislocations and nano-oxide particles in the LPBF sample still had a strong trapping effect on the movement and growth of helium bubbles.After annealing for 300 h,the cellular subgrains in the LPBF sample decomposed,and the nano-oxide particles had no trapping effect on the helium bubbles.At this time,the dislocation structure played a primary role in suppressing the growth of helium bubbles,and the radiation resistance of the LPBF sample remained superior to that of the rolled samples.
基金supported by a grant from China railway corporation science and technology research and development plan project(Grant No.2017G005-B)funding support by Wuyi University’s Hong Kong and Macao Joint Research and Development Fund(Grants No.2021WGALH15)funding support by the Innovation and Technology Commission of Hong Kong SAR Government to the Hong Kong Branch of National Rail Transit Electrification and Automation Engineering Technology Research Center(Grant No.K-BBY1).
文摘The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.
基金supported by the National Natural Science Foundation of China(Grant No.12172063).
文摘The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,and the evolution characteristics and underlying mechanisms are elucidated.The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later.The damage evolution is completely controlled by the expansion-merging of He bubbles,without nucleation–growth of voids.This new damage region can be divided into two sections,each of which exhibits a unique dominant mechanism.The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave,depending on the rate of decrease and the amplitude of the initial peak pressure.A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region,since a significant reverse velocity gradient can only be established if melting occurs.The dominant mechanism in the section distant from the loading side is the action of tensile stress,associated with the profile of the incident shock wave upon reaching the free surface,which determines the material phase near the free surface.Moreover,the presence of He bubbles is another critical factor for formation of the new damage region,which does not occur in pure Al samples.
文摘In this paper,the failure caused by HRAM loads which were generated by high-speed projectile penetration,and protection technology of the fluid-filled structure were explored.A bubble was preset on the projectile trajectory in a fluid-filled structure.Based on the reflection and transmission phenomena of pressure waves at the gas-liquid interface and the compressibility characteristics of gases,a numerical analysis was conducted on the influence of preset bubble on projectile penetration and structural failure characteristics.The results indicate that the secondary water-entry impact phenomenon occurs when a preset bubble exists on the projectile trajectory,leading to the secondary water entry impact loads.The rarefaction waves reflected on the surface of the preset bubble cause the attenuation ratio of the initial impact pressure peak to reach 68.8%and the total specific impulse attenuation ratio to reach 48.6%.Furthermore,the larger the bubble,the faster the projectile,and the more obvious the attenuation effect.Moreover,due to the compressibility of the bubble,the global deformation attenuation ratio of the front and rear walls can reach over 80%.However,the larger the bubble size,the faster the projectile velocity,the smaller the local deformation attenuation effect of the rear wall,and the more severe the failure at the perforation of the rear wall.
基金JSPS KAKENHI Grant Number16H06286 supports global GNSS ionospheric maps (TEC,ROTI,and detrended TEC maps) developed by the Institute for SpaceEarth Environmental Research (ISEE) of Nagoya Universitysupport of the 2024 JASSO Follow-up Research Fellowship Program for a 90-day visiting research at the Institute for Space-Earth Environmental Research (ISEE),Nagoya University+3 种基金the support received from Telkom University under the“Skema Penelitian Terapan Periode I Tahun Anggaran 2024”the Memorandum of Understanding for Research Collaboration on Regional Ionospheric Observation (No:092/SAM3/TE-DEK/2021)the National Institute of Information and Communications Technology (NICT) International Exchange Program 2024-2025(No.2024-007)support for a one-year visiting research at Hokkaido University
文摘This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signals and degrade positioning accuracy.Managed by the Indonesian Geospatial Information Agency(BIG),the Indonesia Continuously Operating Reference Station(Ina-CORS)network comprises over 300 GNSS receivers spanning equatorial to southern low-latitude regions.Ina-CORS is uniquely situated to monitor EPB generation,zonal drift,and dissipation across Southeast Asia.We provide a practical tool for EPB research,by sharing two-dimensional rate of Total Electron Content(TEC)change index(ROTI)derived from this network.We generate ROTI maps with a 10-minute resolution,and samples from May 2024 are publicly available for further scientific research.Two preliminary findings from the ROTI maps of Ina-CORS are noteworthy.First,the Ina-CORS ROTI maps reveal that the irregularities within a broader EPB structure persist longer,increasing the potential for these irregularities to migrate farther eastward.Second,we demonstrate that combined ROTI maps from Ina-CORS and GNSS receivers in East Asia and Australia can be used to monitor the development of ionospheric irregularities in Southeast and East Asia.We have demonstrated the combined ROTI maps to capture the development of ionospheric irregularities in the Southeast/East Asian sector during the G5 Geomagnetic Storm on May 11,2024.We observed simultaneous ionospheric irregularities in Japan and Australia,respectively propagating northwestward and southwestward,before midnight,whereas Southeast Asia’s equatorial and low-latitude regions exhibited irregularities post-midnight.By sharing ROTI maps from Indonesia and integrating them with regional GNSS networks,researchers can conduct comprehensive EPB studies,enhancing the understanding of EPB behavior across Southeast and East Asia and contributing significantly to ionospheric research.
基金Project supported by the Natural Science Foundation of Hubei Province(Grant No.2024AFD068).
文摘In recent years,the phenomenon of multistability has attracted wide attention.In this paper,a memristive chaotic system with extreme multistability is constructed by using a memristor.The dynamic behavior of the system is analyzed by Poincar´e mapping,a time series diagram,and a bifurcation diagram.The results show that the new system has several significant characteristics.First,the new system has a constant Lyapunov exponent,transient chaos and one complete Feigenbaum tree.Second,the system has the phenomenon of bifurcation map shifts that depend on the initial conditions.In addition,we find periodic bursting oscillations,chaotic bursting oscillations,and the transition of chaotic bursting oscillations to periodic bursting oscillations.In particular,when the system parameters take different discrete values,the system generates a bubble phenomenon that varies with the initial conditions,and this bubble can be shifted with the initial values,which has rarely been seen in the previous literature.The implementation by field-programmable gate array(FPGA)and analog circuit simulation show close alignment with the MATLAB numerical simulation results,validating the system’s realizability.Additionally,the image encryption algorithm integrating DNA-based encoding and chaotic systems further demonstrates its practical applicability.
文摘Bubbles play crucial roles in various fields,including naval and ocean engineering,chemical engineering,and biochemical engineering.Numerous theoretical analyses,numerical simulations,and experimental studies have been conducted to reveal the mysteries of bubble motion and its mechanisms.These efforts have significantly advanced research in bubble dynamics,where theoretical study is an efficient method for bubble motion prediction.Since Lord Rayleigh introduced the theoretical model of single-bubble motion in incompressible fluid in 1917,theoretical studies have been pivotal in understanding bubble dynamics.This study provides a comprehensive review of the development and applicability of theoretical studies in bubble dynamics using typical theoretical bubble models across different periods as a focal point and an overview of bubble theory applications in underwater explosion,marine cavitation,and seismic exploration.This study aims to serve as a reference and catalyst for further advancements in theoretical analysis and practical applications of bubble theory across marine fields.
基金funded by the National Natural Science Founda-tion of China(52071109).
文摘Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.
基金Funded by the National Natural Science Foundation of China(No.52172007)。
文摘To analyze the impact of bubbles on the mechanical behavior of glasses,by controlling the refining time,we prepared three borosilicate glasses with the same composition and different porosity.By the analysis software integrated within the optical microscope,the diameter and number of the bubbles on the surface of three borosilicate glasses were quantified.From the hardness and crack initiation resistance(CR),we built the relationship between the porosity and the mechanical performance of these borosilicate glasses.
基金financially supported by the National Natural Science Foundation of China(Nos.52274315 and 52374320)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-22-011A1 and FRF-DF22-16)。
文摘During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.
基金financially supported by the National Science Fund for Distinguished Young Scholars,China(No.52325407)the Key Program of the National Natural Science Foundation of China(No.52234010)。
文摘Laser powder bed fusion(LPBF)is used to fabricate complex-shaped,dense,and high-performance oxide ceramics.During LPBF,bubbles form and evolve in the melt pool and ultimately remain in the printed ceramics as pores,which significantly degrade the mechanical properties.Therefore,it is essential to understand the bubble behaviors during LPBF.Herein,we conducted an in-situ investigation of the bubble dynamics in the melt pool of homogeneously mixed Al_(2)O_(3)-Y_(2)O_(3) powders using synchrotron high-speed X-ray imaging.The formation,growth,motion,and evolution of bubbles,as well as the relationship between the instability of melt flow and bubble rupture during LPBF,were elucidated.The findings reveal that bubbles from the interstices within the powder bed grow following three distinct modes,i.e.,uplift growth,gas channel attachment,and bubble coalescence.Furthermore,melt flow oscillations caused by the bursting of large bubbles can lead to local instability of the melt pool.Results from this study enhance the understanding of bubble dynamics during LPBF and may provide valuable insights for pore elimination in LPBF-processed oxide ceramics.
基金funded by the Natural Science Foundation of China[U20A20292]Shandong Province Science andTechnology SMES InnovationAbility Improvement Project[2023TSGC0005]China Postdoctoral Science Foundation[2024M752697].
文摘In nature,cavitation bubbles typically appear in clusters,engaging in interactions that create a variety of dynamicmotion patterns.To better understand the behavior ofmultiple bubble collapses and the mechanisms of interbubble interaction,this study employs molecular dynamics simulation combined with a coarse-grained force field.By focusing on collapsemorphology,local density,and pressure,it elucidates how the number and arrangement of bubbles influence the collapse process.The mechanisms behind inter-bubble interactions are also considered.The findings indicate that the collapse speed of unbounded bubbles located in lateral regions is greater than that of the bubbles in the center.Moreover,it is shown that asymmetrical bubble distributions lead to a shorter collapse time overall.
基金Supported by the National Natural Science Foundation of China(U21B2069,52274020,52288101,52274022)National Key Research and Development Program of China(2022YFC2806504)。
文摘The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurrent flow in annulus is carried out under different working conditions to reveal how the wellbore inclination angle,liquid phase property and countercurrent liquid velocity affect the bubble deformation and bubble migration trajectory/velocity,and to establish a bubble migration velocity prediction model.The bubbles in the countercurrent flow mainly migrate in two modes:free rising of isolated bubbles,and interactive rising of multiple bubbles.The bubbles migrate by an S-shaped trajectory in the countercurrent flow.With the increase of countercurrent liquid velocity,the lateral oscillation of bubbles is intensified.The increases of wellbore inclination angle,liquid density and liquid viscosity make the bubble migration trajectory gradually to be linear.The bubble is generally ellipsoidal during its rising.The wellbore inclination angle has little effect on the degree of bubble deformation.The bubbles are ellipsoidal during rising,with little influence of wellbore inclination angle on bubble deformation.With the increase of liquid viscosity and density,the aspect ratio of the bubble decreases.As the wellbore inclination angle increases,the bubble migration velocity gradually decreases.As the liquid viscosity increases,the bubble migration velocity decreases.As the liquid density increases,the bubble migration velocity increases slightly.The established bubble migration velocity prediction model yields errors within±15%,and demonstrates broad applicability across a wide range of operating conditions.
基金supported by the National Natural Science Foundation of China(Grant No.12374441)。
文摘Bubbles within an elastic shell,which undergo ultrasound-driven oscillation to treat tumors and soft tissues,are frequently treated as viscoelastic media.Therefore,studying the dynamic behavior of bubbles wrapped in a viscoelastic medium while considering an elastic shell can provide theoretical support for ultrasound biotherapy.Bubbles are always in the form of clusters.Therefore,a model of spherical bubble clusters in a liquid cavity wrapped by an elastic shell was constructed,the coupled oscillation equations of bubbles were obtained by taking into account the dynamic effects of the elastic shell and the viscoelastic media outside the cavity,and the oscillation behaviors of the bubbles were analyzed.Acoustic waves at 1.5 MHz could cause bubbles with a radius of 1μm to resonate.Increasing the number of bubbles increased the suppressing effect of bubble oscillation caused by bubble interaction.The bubble cluster oscillation caused the elastic shell to oscillate and be stressed,and the stress trend was the inverse of the bubble oscillation trend with maximal tensile and compressive stresses.Bubbles with an equilibrium radius of 2μm exhibited the lowest inertial cavitation threshold,making inertial cavitation more likely under high-frequency acoustic excitation.The inertial cavitation threshold of bubbles was heavily influenced by the acoustic wave frequency,bubble number density,and bubble cluster radius.The nonspherical oscillation stability of bubbles was primarily affected by the driving acoustic pressure amplitude and frequency,bubble initial radius,bubble number density,and bubble cluster radius.The acoustic frequency and amplitude exhibited a synergistic effect,with a minimum unstable driving acoustic pressure threshold of approximately 0.13 MPa.The initial radius within the elastic shell affected the minimum unstable driving acoustic pressure threshold.
