China Initiative Accelerator Driven System (CIADS) proposed by the Chinese Academy of Sciences which is one of the twelve Major National Scientific and Technological Infrastructures has been approved by National Devel...China Initiative Accelerator Driven System (CIADS) proposed by the Chinese Academy of Sciences which is one of the twelve Major National Scientific and Technological Infrastructures has been approved by National Development and Reform Commission of China, and supposed to be the first principle prototype ADS experimental facility in the world.展开更多
In reactor physics tests, it is important to monitor sub-criticality continuously during criticality approach. Reactivity measurements by the inverse kinetics method are widely used during the operation of a nuclear r...In reactor physics tests, it is important to monitor sub-criticality continuously during criticality approach. Reactivity measurements by the inverse kinetics method are widely used during the operation of a nuclear reactor. This technique is successfully applied at sufficiently high power level or to a core without an external neutron source where the neutron source term in point reactor kinetics equations may be neglected. For operation at low power levels or in the sub-critical domain, the increase in the fluctuation of the neutron signal may cause difficulties in the evaluation of reactivity and the effect of direct emission from the external neutron source may not be neglected. Therefore, contribution of the neutron source must be taken into account and this implies knowledge of a quantity proportional to the source strength, which calls the source term and then it should be determined. The research work has been conducted to measure reactivity with source term using a dedicated reactivity measurement system by the Least Square Inverse Kinetics Method (LSIKM). Application to a simulator of HANARO research reactor, Korea Atomic Energy Research Institute (KAERI), with known source strength and reactivity worth has showed consistent and satisfactory agreement.展开更多
Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain...Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.展开更多
The electrochemical oxidation of biomass-derived platform molecule 5-hydroxymethylfurfural(HMF)represents a crucial pathway for green transformation into high-value chemicals,yet its reaction pathway selectivity,effic...The electrochemical oxidation of biomass-derived platform molecule 5-hydroxymethylfurfural(HMF)represents a crucial pathway for green transformation into high-value chemicals,yet its reaction pathway selectivity,efficiency,and catalyst stability are strongly dependent on the electrolyte pH environment.Under alkaline conditions,high OH−concentration facilitates preferential aldehyde group oxidation and efficient deprotonation,enabling highly efficient synthesis of 2,5-furandicarboxylic acid,but simultaneously induces HMF self-degradation and complicates product separation.As pH decreases,the reaction mechanism shifts toward enhanced hydroxymethyl oxidation,leading to intermediate accumulation(such as 5-hydroxymethyl-2-furancarboxylic acid,2,5-diformylfuran,and 5-formyl-2-furancarboxylic acid)with challenging selectivity control and significantly slowed reaction kinetics.This review comprehensively examines the systematic differences in HMF oxidation pathways and surface catalytic mechanisms across the full pH range from alkaline to acidic conditions.Addressing the distinct reaction characteristics and core challenges in alkaline,near-neutral,and acidic media,we systematically evaluate design strategies for high-efficiency electrocatalysts and explore reactor design aspects.Future research should focus on process integration(with tailored reactor design)for energy consumption reduction in alkaline systems,targeted synthesis of diverse oxidation products in near-neutral systems,and innovative catalyst development for acidic systems,thereby advancing the efficiency,selectivity,and practical application of HMF electrooxidation technologies across the entire pH spectrum through synergistic optimization of catalyst,reactor,and process.展开更多
Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluat...Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluation criteria and an incomplete understanding of how end-face defects lead to failure,defective mechanical seals are often replaced empirically,which not only contributes to economic losses but also poses risks to reactor safety.To reveal the mechanism by which surface defects affect sealing performance,this study proposes a classification method for end-face defects based on the analysis of approximately one hundred used mechanical seals.A defect characterization model was established by extracting key features of the observed defects.The influence of these defects on sealing performance was analyzed using a liquid-thermal-solid coupling model.Changes in sealing gap,leakage rates,and film stiffness with respect to defect size,location,and other characteristics are discussed.This work contributes to a deeper understanding of defect failure mechanisms.These results can serve as a reference for evaluating defective seals.展开更多
Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for ...Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.展开更多
The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here...The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.展开更多
Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generat...Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.展开更多
One of the main issues in designing optimum tapered cascades for uranium enrichment for annual fuel production in a power reactor is whether to employ large(fat)or small(thin)cascades.What will be the permissible and ...One of the main issues in designing optimum tapered cascades for uranium enrichment for annual fuel production in a power reactor is whether to employ large(fat)or small(thin)cascades.What will be the permissible and optimal ranges of the number of machines that can be used in a cascade?For the first time,the permissible and optimal ranges of the number of gas centrifuges that can be utilized in a cascade were investigated using two types of centrifuges,and the performance of small and large tapered cascades was discussed.The particle swarm optimization algorithm(PSO)has been used to optimize tapered cascades.The results show:(1)For the first centrifuge,41 cascades(91≤n≤4897)and for the second centrifuge,49 cascades(18≤n≤3839)with small and large sizes can be used in enrichment facilities,and the best cascade for them has 530(with 23 stages)and 39(with 7 stages)centrifuges,respectively.(2)For both centrifuges,when 600≤n(number of centrifuges=n),the large cascade performance changes are relatively insignificant.(3)For both types of gas centrifuges,the annual los s of separation power in enrichment facilities is approximately 1.25%-4.82%of the total separation work required.展开更多
Membrane fouling is often considered as a hindrance for the application of microfiltration/ultrafiltration(MF/UF) for drinking water production. A novel process of photocatalytic membrane reactor/dynamic membrane(PMR/...Membrane fouling is often considered as a hindrance for the application of microfiltration/ultrafiltration(MF/UF) for drinking water production. A novel process of photocatalytic membrane reactor/dynamic membrane(PMR/DM), operating in a continuous mode under sub-critical flux, was proposed for the mitigation of membrane fouling caused by humic acids(HAs) in water. The mechanism of membrane fouling alleviation with synergistic photocatalytic oxidation and dynamic layer isolating effect was comprehensively investigated from the characterization of foulant evolution responsible for the reversible and irreversible fouling. The results showed that the PMR/DM utilized photocatalytic oxidation to enhance the porosity and hydrophilicity of the fouling layer by converting the high molecular weight(MW) and hydrophobic HA molecules with carboxylic functional groups and aromatic structures into low-MW hydrophilic or transphilic fractions, including tryptophan-like or fulvic-like substances. The fouling layer formed in the PMR/DM by combination of photocatalytic oxidation and DM running at a sub-critical flux of 100 L·h^-1·m^-2, was more hydrophilic and more porous, resulting in the lowest trans-membrane pressure(TMP) growth rates, as compared to the processes of ceramic membrane(CM), DM and PMR/CM.Meanwhile, the dynamic layer prevented the foulants, particularly the high-MW hydrophobic fractions,from contacting the primary membrane, which enabled the membrane permeability to be restored easily.展开更多
This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early applic...This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early application of fusion technology. The necessity and feasibility to develop that system in China are illustrated on the basis of prediction of the demand of energy source in the first half of the 21th century, the status of current fission energy supply and the progress in fusion technology in the world. The characteristics of fusion neutron driver and the potential for transmutation of long-lived nuclear wastes and breeding of fissile nuclear fuel in a blanket are analyzed. A scenario of development steps is proposed.展开更多
Sub-critical water extraction is a brand-new separation technology. This paper mainly discussed the principle, advantages of sub-critical water extraction, and its applications ranging from the medicinal plants tradit...Sub-critical water extraction is a brand-new separation technology. This paper mainly discussed the principle, advantages of sub-critical water extraction, and its applications ranging from the medicinal plants traditionally used in Europe and Asia to produce pharmaceutical extracts (such as volatile oil, tannins, flavonoids, anthraquinone, lactone, etc.). Meanwhile, the prospect of sub-critical water extraction in plant extractives is also explored. It will be widely used in the field of medical plants, bringing huge economic benefits, environmental benefits and social benefits.展开更多
This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different ...This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different conditions were investigated. The studied parameters include temperatures in the range of 180 to 270°C, the feed to solventfeed-to-solvent (in this case water) ratio (1:1, 1:2, 1:3, 1:4 and 1:5) and extraction times in the range of 5-60 minutes. The results showed that the optimum temperature, feed to solventfeed-to-solvent ratio, and extraction time were 270°C, 1:3, and 20 minutes, respectively. In another experiment, the extracted free fatty acids were converted into mono-, di-, and triglycerides through esterification with glycerol to increase the value added of the extracted products. The kinetics of the extraction process was found to be corresponding to an irreversible consecutive unimolecular-type first order reaction, consisting of the extraction step followed by the decomposition reaction step. Both reaction rates of extraction and decomposition were estimated using the reaction rate equations utilizing the nonlinear regression method. The apparent activation energy was calculated to be 46.1 kJ·mol-1. This result indicates a diffusion controlled reaction. For more exploration and deep understanding of the extraction mechanism, other thermodynamic parameters were also calculated and analyzed including,ΔH#, ΔS#, and ΔG# of the extraction step.展开更多
In-plane shear crack sub-critical propagation of rock at high temperature was studied by finite element method and shear-box(i.e.compression-shear) test with newly designed electrically conductive adhesive method.Nume...In-plane shear crack sub-critical propagation of rock at high temperature was studied by finite element method and shear-box(i.e.compression-shear) test with newly designed electrically conductive adhesive method.Numerical and experimental results show that the normalized shear(Mode Ⅱ) stress intensity factors,K ⅡT/KT0 is decreased as the temperature increases because high temperature can improve stress distribution at crack tip and reduce the Mode Ⅱ stress intensity factor.Microscopic features of fractured surface are of little pits and secondary micro-cracks in the vicinity(1.5-4.0 mm) of the crack tip.The chevron-shape secondary cracks gradually merge in the length of about 4-5 mm and disappear along the direction of crack propagation.Stable shear crack propagation time is increased with the increasing temperature while the stable shear crack propagation rate is decreased with the increasing temperature,since high temperature can increase the shear(Mode Ⅱ) fracture toughness and prevent the crack growth.It is necessary to ensure the ligament of specimen long enough to measure the maximum unstable crack propagation rate of rock.展开更多
Shear-box(i.e.compression-shear) test and newly designed electrically conductive adhesive method were used to measure shear crack sub-critical propagation time and rate of sandstone specimen.Different cubic specimens ...Shear-box(i.e.compression-shear) test and newly designed electrically conductive adhesive method were used to measure shear crack sub-critical propagation time and rate of sandstone specimen.Different cubic specimens with and without holes were tested to study the effect of holes on the shear crack sub-critical propagation.Numerical and experimental results show that three independent variables of hole,the interval distance S,the distance between the center of hole and the crack tip L,and hole radius R,have different contribution to the ratio of stress intensity factor of the specimen with holes to that of the specimen without hole,KⅡ/KⅡ0.Increasing S and decreasing L and R will result in the decrease of KⅡ/KⅡ0 and help crack arrest.The weight relation of the independent variables for KⅡ/KⅡ0 is S>L>R.The specimen DH3 with the largest value of S and the smallest values of L and R has the longest sub-critical crack propagation time and the smallest sub-critical crack propagation rate.Adding two suitable holes symmetrically to the original crack plane in rock specimen is considered to be a potential method for crack arrest of rock.展开更多
The strata movement induced by sub-critical extraction is a problem not receiving due attention because of its relatively small magnitude of deformation.However,with the increase of mining depth,sub-critical extractio...The strata movement induced by sub-critical extraction is a problem not receiving due attention because of its relatively small magnitude of deformation.However,with the increase of mining depth,sub-critical extraction has become a general phenomenon.This calls for an in-depth investigation into the characteristics of ground movements observed under different extents of sub-critical extraction,so as to determine the appropriate mining technique for use.Following a discussion of the factors influencing the extent of super-critical extraction,the super-critical extraction extent evaluation criteria was presented,the characteristics and laws of the strata and ground movements caused by such an extraction condition were systematically analyzed,and the mechanism of surface subsidence induced by sub-critical extraction was revealed.The result of study may serve as a basis for the development of the strata and ground movement prediction model and the mining techniques appropriate for use at depth beneath surface structures and buildings.展开更多
Hydrothermal liquefaction of wheat straw in sub-critical water with ionic liquid was investigated in an autoclave. The product distribution at different temperatures and pressures was studied. The liquid oil and the r...Hydrothermal liquefaction of wheat straw in sub-critical water with ionic liquid was investigated in an autoclave. The product distribution at different temperatures and pressures was studied. The liquid oil and the residuals were tested by 1H NMR, FTIR and SEM techniques. The results indicated that under the same conditions, the oil yield from liquefaction of wheat straw in water/ethanol was higher than that in sub-critical water. The result also showed that under the investigated conditions, adding 1-butyl-3-methylimidazolium chloride([Bmim]Cl) could increase the total conversion and gas yield, while at the same time the yield of n-hexane insoluble fraction and the tetrahydrofuran soluble fraction was reduced. Moreover, the results also showed that upon adding [Bmim]Cl the contents of the aliphatic hydrogen and phenols in liquid oil also increased along with improved oil quality.展开更多
The co-liquefaction behaviors of cotton seed(CS)and flos populi(FP)were investigated in the sub-critical water/ethanol mixed solvent using the medical stone(MS)based additives.Oil products were characterized using FTI...The co-liquefaction behaviors of cotton seed(CS)and flos populi(FP)were investigated in the sub-critical water/ethanol mixed solvent using the medical stone(MS)based additives.Oil products were characterized using FTIR,GC-MS,1HNMR,and 13CNMR techniques.The test results showed that the synergistic effect of co-liquefaction was obvious when the ratio of cotton seed and flospopuli was 1:1 without additives.The additives,such as 12-phosphotungstic acid(PW12),HZSM-5,PW12/HZSM-5 and modified medical stone(MS),PW12/MS,Ni/MS,Co/MS,Mo/MS and Co-Mo/MS,could increase the bio-oil yield;and the modified MS resulted in higher liquefied oil yield than that achieved by MS.Furthermore,additives such as Ni/MS,Mo/MS,and Co-Mo/MS also could increase the yield of aliphatic hydrocarbons in liquefied oil.The addition of Co-Mo/MS could lead to a highest liquefied oil yield of 28.8%,while the additive of PW12/HZSM-5 could result in a highest total conversion of 81.6%.Results also revealed that additives,such as PW12/MS,PW12,PW12/HZSM-5,Ni/MS,Co/MS,Mo/MS,and Co-Mo/MS,could increase the H2 production and decrease the CO2 production in gas products.展开更多
[Objectives] To study the optimal conditions for extracting procyanidins fromLycium ruthenicum Murr. with sub-critical fluid R134 a( 1,1,1,2-tetrafluoroethane) in 1 L extraction kettle. [Methods]Taking the extraction ...[Objectives] To study the optimal conditions for extracting procyanidins fromLycium ruthenicum Murr. with sub-critical fluid R134 a( 1,1,1,2-tetrafluoroethane) in 1 L extraction kettle. [Methods]Taking the extraction rate of procyanidins as an indicator,the influence of pressure,temperature,and extraction time on extraction rate of procyanidins fromL. Ruthenicum Murr. was studied by single factor experimental methods and orthogonal array design. [Results]The order of factors affecting extraction rate of procyanidins was extraction temperature > extraction pressure > extraction time. The optimum extraction conditions were as follows: the extraction rate of procyanidins fromL. ruthenicum Murr. was the highest with extraction pressure of 1. 2 MPa,extraction temperature of 50℃ and extraction time of 90 min. The content of procyanidins in L. ruthenicum Murr. from different producing areas was determined by vanillin-HCl method under the optimal conditions. [Conclusions] The method has the advantages of easy operation,good selectivity,low extraction temperature and high extraction efficiency,which is suitable for extraction of procyanidins in L. ruthenicum Murr.展开更多
Medical isotopes are the foundation material for nuclear medicine and are primarily produced through in-reactor irradia-tion.Neutron spectrum regulation is the main technical approach for enhancing the production of m...Medical isotopes are the foundation material for nuclear medicine and are primarily produced through in-reactor irradia-tion.Neutron spectrum regulation is the main technical approach for enhancing the production of medical isotopes,and it requires determining the optimal neutron spectrum and quantifying the values of neutrons in different energy regions.We calculated the neutron energy region values for 20 medical isotopes(^(14)C,^(32)P,^(47)Sc,^(60)Co,^(64)Cu,^(67)Cu,^(89)Sr,^(90)Y,^(99)Mo,^(125)I,^(131)I,^(153)Sm,^(161)Tb,^(166)Ho,^(177)Lu,^(186)Re,^(188)Re,^(92)Ir,^(225)Ac,and ^(252)Cf).The entire energy range was divided into 238 energy regions to improve the energy spectrum resolution,and both fast and thermal reactors were simulated to enhance universal applicability.A dataset of neutron energy region values across the entire energy range was built,which identifies the positive and negative-energy regions and guides the neutron spectrum regulation process during in-reactor medical isotope produc-tion.We conducted neutron spectrum regulation based on this dataset,which effectively improved the production efficiency of medical isotopes and demonstrated the correctness and feasibility of the dataset.展开更多
文摘China Initiative Accelerator Driven System (CIADS) proposed by the Chinese Academy of Sciences which is one of the twelve Major National Scientific and Technological Infrastructures has been approved by National Development and Reform Commission of China, and supposed to be the first principle prototype ADS experimental facility in the world.
文摘In reactor physics tests, it is important to monitor sub-criticality continuously during criticality approach. Reactivity measurements by the inverse kinetics method are widely used during the operation of a nuclear reactor. This technique is successfully applied at sufficiently high power level or to a core without an external neutron source where the neutron source term in point reactor kinetics equations may be neglected. For operation at low power levels or in the sub-critical domain, the increase in the fluctuation of the neutron signal may cause difficulties in the evaluation of reactivity and the effect of direct emission from the external neutron source may not be neglected. Therefore, contribution of the neutron source must be taken into account and this implies knowledge of a quantity proportional to the source strength, which calls the source term and then it should be determined. The research work has been conducted to measure reactivity with source term using a dedicated reactivity measurement system by the Least Square Inverse Kinetics Method (LSIKM). Application to a simulator of HANARO research reactor, Korea Atomic Energy Research Institute (KAERI), with known source strength and reactivity worth has showed consistent and satisfactory agreement.
基金supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2020261)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of the Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412)。
文摘Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.
基金supported by the National Key R&D Program of China(2023YFA1507400)the National Natural Science Foundation of China(Grant No.22325805,22441010,22408203)+2 种基金Beijing Natural Science Foundation(Grant No.JQ22003)the Haihe Laboratory of Sustainable Chemical Transformations(24HHWCSS00007)Tsinghua University Dushi Program,and Sinopec Group(PR20232572).
文摘The electrochemical oxidation of biomass-derived platform molecule 5-hydroxymethylfurfural(HMF)represents a crucial pathway for green transformation into high-value chemicals,yet its reaction pathway selectivity,efficiency,and catalyst stability are strongly dependent on the electrolyte pH environment.Under alkaline conditions,high OH−concentration facilitates preferential aldehyde group oxidation and efficient deprotonation,enabling highly efficient synthesis of 2,5-furandicarboxylic acid,but simultaneously induces HMF self-degradation and complicates product separation.As pH decreases,the reaction mechanism shifts toward enhanced hydroxymethyl oxidation,leading to intermediate accumulation(such as 5-hydroxymethyl-2-furancarboxylic acid,2,5-diformylfuran,and 5-formyl-2-furancarboxylic acid)with challenging selectivity control and significantly slowed reaction kinetics.This review comprehensively examines the systematic differences in HMF oxidation pathways and surface catalytic mechanisms across the full pH range from alkaline to acidic conditions.Addressing the distinct reaction characteristics and core challenges in alkaline,near-neutral,and acidic media,we systematically evaluate design strategies for high-efficiency electrocatalysts and explore reactor design aspects.Future research should focus on process integration(with tailored reactor design)for energy consumption reduction in alkaline systems,targeted synthesis of diverse oxidation products in near-neutral systems,and innovative catalyst development for acidic systems,thereby advancing the efficiency,selectivity,and practical application of HMF electrooxidation technologies across the entire pH spectrum through synergistic optimization of catalyst,reactor,and process.
基金Supported by National Natural Science Foundation of China(Grant No.51975315)National Science and Technology Major Project of China(Grant No.2019-IV-0020-0088).
文摘Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluation criteria and an incomplete understanding of how end-face defects lead to failure,defective mechanical seals are often replaced empirically,which not only contributes to economic losses but also poses risks to reactor safety.To reveal the mechanism by which surface defects affect sealing performance,this study proposes a classification method for end-face defects based on the analysis of approximately one hundred used mechanical seals.A defect characterization model was established by extracting key features of the observed defects.The influence of these defects on sealing performance was analyzed using a liquid-thermal-solid coupling model.Changes in sealing gap,leakage rates,and film stiffness with respect to defect size,location,and other characteristics are discussed.This work contributes to a deeper understanding of defect failure mechanisms.These results can serve as a reference for evaluating defective seals.
基金supported by Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2020261)Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412).
文摘Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.
基金supported by the National Key Projects for Fundamental Research and development of China(2020YFA0710202)the China Postdoctoral Science Foundation(2024M761567)Shandong Postdoctoral Science Foundation(SDCX-ZG-202400271).
文摘The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.
基金financial support from the Nuclear Energy Science&Technology and Human Resource Development Project of the Japan Atomic Energy Agency/Collaborative Laboratories for Advanced Decommissioning Science(No.R04I034)The author Ruicong Xu appreciates the scholarship(financial support)from the China Scholarship Council(CSC,No.202106380073).
文摘Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.
文摘One of the main issues in designing optimum tapered cascades for uranium enrichment for annual fuel production in a power reactor is whether to employ large(fat)or small(thin)cascades.What will be the permissible and optimal ranges of the number of machines that can be used in a cascade?For the first time,the permissible and optimal ranges of the number of gas centrifuges that can be utilized in a cascade were investigated using two types of centrifuges,and the performance of small and large tapered cascades was discussed.The particle swarm optimization algorithm(PSO)has been used to optimize tapered cascades.The results show:(1)For the first centrifuge,41 cascades(91≤n≤4897)and for the second centrifuge,49 cascades(18≤n≤3839)with small and large sizes can be used in enrichment facilities,and the best cascade for them has 530(with 23 stages)and 39(with 7 stages)centrifuges,respectively.(2)For both centrifuges,when 600≤n(number of centrifuges=n),the large cascade performance changes are relatively insignificant.(3)For both types of gas centrifuges,the annual los s of separation power in enrichment facilities is approximately 1.25%-4.82%of the total separation work required.
基金Supported by the National Natural Science Foundation of China(21566013,51562016)Youth Science Foundation of Jiangxi Provincial Department of Education,China(GJJ170970)the Natural Science Foundation of Jiangxi Province(20171BAB206015)
文摘Membrane fouling is often considered as a hindrance for the application of microfiltration/ultrafiltration(MF/UF) for drinking water production. A novel process of photocatalytic membrane reactor/dynamic membrane(PMR/DM), operating in a continuous mode under sub-critical flux, was proposed for the mitigation of membrane fouling caused by humic acids(HAs) in water. The mechanism of membrane fouling alleviation with synergistic photocatalytic oxidation and dynamic layer isolating effect was comprehensively investigated from the characterization of foulant evolution responsible for the reversible and irreversible fouling. The results showed that the PMR/DM utilized photocatalytic oxidation to enhance the porosity and hydrophilicity of the fouling layer by converting the high molecular weight(MW) and hydrophobic HA molecules with carboxylic functional groups and aromatic structures into low-MW hydrophilic or transphilic fractions, including tryptophan-like or fulvic-like substances. The fouling layer formed in the PMR/DM by combination of photocatalytic oxidation and DM running at a sub-critical flux of 100 L·h^-1·m^-2, was more hydrophilic and more porous, resulting in the lowest trans-membrane pressure(TMP) growth rates, as compared to the processes of ceramic membrane(CM), DM and PMR/CM.Meanwhile, the dynamic layer prevented the foulants, particularly the high-MW hydrophobic fractions,from contacting the primary membrane, which enabled the membrane permeability to be restored easily.
文摘This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early application of fusion technology. The necessity and feasibility to develop that system in China are illustrated on the basis of prediction of the demand of energy source in the first half of the 21th century, the status of current fission energy supply and the progress in fusion technology in the world. The characteristics of fusion neutron driver and the potential for transmutation of long-lived nuclear wastes and breeding of fissile nuclear fuel in a blanket are analyzed. A scenario of development steps is proposed.
文摘Sub-critical water extraction is a brand-new separation technology. This paper mainly discussed the principle, advantages of sub-critical water extraction, and its applications ranging from the medicinal plants traditionally used in Europe and Asia to produce pharmaceutical extracts (such as volatile oil, tannins, flavonoids, anthraquinone, lactone, etc.). Meanwhile, the prospect of sub-critical water extraction in plant extractives is also explored. It will be widely used in the field of medical plants, bringing huge economic benefits, environmental benefits and social benefits.
文摘This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different conditions were investigated. The studied parameters include temperatures in the range of 180 to 270°C, the feed to solventfeed-to-solvent (in this case water) ratio (1:1, 1:2, 1:3, 1:4 and 1:5) and extraction times in the range of 5-60 minutes. The results showed that the optimum temperature, feed to solventfeed-to-solvent ratio, and extraction time were 270°C, 1:3, and 20 minutes, respectively. In another experiment, the extracted free fatty acids were converted into mono-, di-, and triglycerides through esterification with glycerol to increase the value added of the extracted products. The kinetics of the extraction process was found to be corresponding to an irreversible consecutive unimolecular-type first order reaction, consisting of the extraction step followed by the decomposition reaction step. Both reaction rates of extraction and decomposition were estimated using the reaction rate equations utilizing the nonlinear regression method. The apparent activation energy was calculated to be 46.1 kJ·mol-1. This result indicates a diffusion controlled reaction. For more exploration and deep understanding of the extraction mechanism, other thermodynamic parameters were also calculated and analyzed including,ΔH#, ΔS#, and ΔG# of the extraction step.
基金Project(50374073) supported by the National Natural Science Foundation of ChinaProject(1343-77239) supported by the Graduate Education Innovation Project of Central South University,China
文摘In-plane shear crack sub-critical propagation of rock at high temperature was studied by finite element method and shear-box(i.e.compression-shear) test with newly designed electrically conductive adhesive method.Numerical and experimental results show that the normalized shear(Mode Ⅱ) stress intensity factors,K ⅡT/KT0 is decreased as the temperature increases because high temperature can improve stress distribution at crack tip and reduce the Mode Ⅱ stress intensity factor.Microscopic features of fractured surface are of little pits and secondary micro-cracks in the vicinity(1.5-4.0 mm) of the crack tip.The chevron-shape secondary cracks gradually merge in the length of about 4-5 mm and disappear along the direction of crack propagation.Stable shear crack propagation time is increased with the increasing temperature while the stable shear crack propagation rate is decreased with the increasing temperature,since high temperature can increase the shear(Mode Ⅱ) fracture toughness and prevent the crack growth.It is necessary to ensure the ligament of specimen long enough to measure the maximum unstable crack propagation rate of rock.
基金Project(50374073) supported by the National Natural Science Foundation of ChinaProject(1343-77239) supported by the Graduate Education Innovation Project of Central South University,China
文摘Shear-box(i.e.compression-shear) test and newly designed electrically conductive adhesive method were used to measure shear crack sub-critical propagation time and rate of sandstone specimen.Different cubic specimens with and without holes were tested to study the effect of holes on the shear crack sub-critical propagation.Numerical and experimental results show that three independent variables of hole,the interval distance S,the distance between the center of hole and the crack tip L,and hole radius R,have different contribution to the ratio of stress intensity factor of the specimen with holes to that of the specimen without hole,KⅡ/KⅡ0.Increasing S and decreasing L and R will result in the decrease of KⅡ/KⅡ0 and help crack arrest.The weight relation of the independent variables for KⅡ/KⅡ0 is S>L>R.The specimen DH3 with the largest value of S and the smallest values of L and R has the longest sub-critical crack propagation time and the smallest sub-critical crack propagation rate.Adding two suitable holes symmetrically to the original crack plane in rock specimen is considered to be a potential method for crack arrest of rock.
基金Project supported by Doctoral Study Courses Foundation and Post-Doctoral Scientific Foundation.
文摘The strata movement induced by sub-critical extraction is a problem not receiving due attention because of its relatively small magnitude of deformation.However,with the increase of mining depth,sub-critical extraction has become a general phenomenon.This calls for an in-depth investigation into the characteristics of ground movements observed under different extents of sub-critical extraction,so as to determine the appropriate mining technique for use.Following a discussion of the factors influencing the extent of super-critical extraction,the super-critical extraction extent evaluation criteria was presented,the characteristics and laws of the strata and ground movements caused by such an extraction condition were systematically analyzed,and the mechanism of surface subsidence induced by sub-critical extraction was revealed.The result of study may serve as a basis for the development of the strata and ground movement prediction model and the mining techniques appropriate for use at depth beneath surface structures and buildings.
基金the Research Fund for the Doctoral Program of Higher Education for new teachers of China(20091404120002)the Shanxi Province Science Foundation for Youths of China(2011021008-1)the Soft Science Program of Shanxi Province(2011041015-01)
文摘Hydrothermal liquefaction of wheat straw in sub-critical water with ionic liquid was investigated in an autoclave. The product distribution at different temperatures and pressures was studied. The liquid oil and the residuals were tested by 1H NMR, FTIR and SEM techniques. The results indicated that under the same conditions, the oil yield from liquefaction of wheat straw in water/ethanol was higher than that in sub-critical water. The result also showed that under the investigated conditions, adding 1-butyl-3-methylimidazolium chloride([Bmim]Cl) could increase the total conversion and gas yield, while at the same time the yield of n-hexane insoluble fraction and the tetrahydrofuran soluble fraction was reduced. Moreover, the results also showed that upon adding [Bmim]Cl the contents of the aliphatic hydrogen and phenols in liquid oil also increased along with improved oil quality.
基金This work was supported by the NSFCShanxi coal based low carbon joint fund(U1810209)the Natural Science Foundation of Shanxi Province(201901D111006).
文摘The co-liquefaction behaviors of cotton seed(CS)and flos populi(FP)were investigated in the sub-critical water/ethanol mixed solvent using the medical stone(MS)based additives.Oil products were characterized using FTIR,GC-MS,1HNMR,and 13CNMR techniques.The test results showed that the synergistic effect of co-liquefaction was obvious when the ratio of cotton seed and flospopuli was 1:1 without additives.The additives,such as 12-phosphotungstic acid(PW12),HZSM-5,PW12/HZSM-5 and modified medical stone(MS),PW12/MS,Ni/MS,Co/MS,Mo/MS and Co-Mo/MS,could increase the bio-oil yield;and the modified MS resulted in higher liquefied oil yield than that achieved by MS.Furthermore,additives such as Ni/MS,Mo/MS,and Co-Mo/MS also could increase the yield of aliphatic hydrocarbons in liquefied oil.The addition of Co-Mo/MS could lead to a highest liquefied oil yield of 28.8%,while the additive of PW12/HZSM-5 could result in a highest total conversion of 81.6%.Results also revealed that additives,such as PW12/MS,PW12,PW12/HZSM-5,Ni/MS,Co/MS,Mo/MS,and Co-Mo/MS,could increase the H2 production and decrease the CO2 production in gas products.
基金Supported by 2016 Instrument Functional Development Project of Lanzhou Regional Center of Resources and Environmental Science Instrument,CAS(2018gl11)
文摘[Objectives] To study the optimal conditions for extracting procyanidins fromLycium ruthenicum Murr. with sub-critical fluid R134 a( 1,1,1,2-tetrafluoroethane) in 1 L extraction kettle. [Methods]Taking the extraction rate of procyanidins as an indicator,the influence of pressure,temperature,and extraction time on extraction rate of procyanidins fromL. Ruthenicum Murr. was studied by single factor experimental methods and orthogonal array design. [Results]The order of factors affecting extraction rate of procyanidins was extraction temperature > extraction pressure > extraction time. The optimum extraction conditions were as follows: the extraction rate of procyanidins fromL. ruthenicum Murr. was the highest with extraction pressure of 1. 2 MPa,extraction temperature of 50℃ and extraction time of 90 min. The content of procyanidins in L. ruthenicum Murr. from different producing areas was determined by vanillin-HCl method under the optimal conditions. [Conclusions] The method has the advantages of easy operation,good selectivity,low extraction temperature and high extraction efficiency,which is suitable for extraction of procyanidins in L. ruthenicum Murr.
基金sponsored by the National Natural Science Foundation of China(No.12305190)Lingchuang Research Project of China National Nuclear Corporation(CNNC).
文摘Medical isotopes are the foundation material for nuclear medicine and are primarily produced through in-reactor irradia-tion.Neutron spectrum regulation is the main technical approach for enhancing the production of medical isotopes,and it requires determining the optimal neutron spectrum and quantifying the values of neutrons in different energy regions.We calculated the neutron energy region values for 20 medical isotopes(^(14)C,^(32)P,^(47)Sc,^(60)Co,^(64)Cu,^(67)Cu,^(89)Sr,^(90)Y,^(99)Mo,^(125)I,^(131)I,^(153)Sm,^(161)Tb,^(166)Ho,^(177)Lu,^(186)Re,^(188)Re,^(92)Ir,^(225)Ac,and ^(252)Cf).The entire energy range was divided into 238 energy regions to improve the energy spectrum resolution,and both fast and thermal reactors were simulated to enhance universal applicability.A dataset of neutron energy region values across the entire energy range was built,which identifies the positive and negative-energy regions and guides the neutron spectrum regulation process during in-reactor medical isotope produc-tion.We conducted neutron spectrum regulation based on this dataset,which effectively improved the production efficiency of medical isotopes and demonstrated the correctness and feasibility of the dataset.
