Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimizat...Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimization method grounded in the global adjustment of nodal coordinates.First,a build direction is selected to minimize the number of violating struts.Then,an angular-constraint matrix is assembled from strut direction vectors,and analytical sensitivities with respect to nodal coordinates are derived to enable efficient constrained optimization under nonlinear angular inequality constraints.Numerical studies on two complex curved-surface lattices demonstrate that all overhang violations are eliminated while only minor changes are induced in global stiffness and strength.In particular,the maximum displacement of an ergonomic insole varies by only 2.87%after optimization.The results confirm the method’s versatility and engineering robustness,providing a practical approach for additive manufacturing-oriented lattice structure design.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-e...Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.展开更多
Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-ins...Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-inspired lattice structures feature a square-grid 2D lattice with double diagonal bracings and are additively manufactured via digital light processing(DLP).The collapse strength and energy absorption capacity of sea sponge lattice structures are evaluated under various impact conditions and are compared to those of their constituent square-grid and double diagonal lattices.This study demonstrates that sea sponge lattices can achieve an 11-fold increase in energy absorption compared to the square-grid lattice,due to the stabilizing effect of the double diagonal bracings prompting the structure to collapse layer-bylayer under impact.By adjusting the thickness ratio in the sea sponge lattice,up to 76.7%increment in energy absorption is attained.It is also shown that sea-sponge lattices outperform well-established energy-absorbing materials of equal weight,such as hexagonal honeycombs,confirming their significant potential for impact mitigation.Additionally,this research highlights the enhancements in energy absorption achieved by adding a small amount(0.015 phr)of Multi-Walled Carbon Nanotubes(MWCNTs)to the photocurable resin,thus unlocking new possibilities for the design of innovative lightweight structures with multifunctional attributes.展开更多
Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet ...Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet little is known about its osteological development characteristics.Understanding these ontogenetic patterns is essential for explaining phylogenetic relationships within Clupeiformes,informing larval identification in ichthyoplankton surveys,and enhancing aquaculture practices.This study describes the ontogenetic characteristics of the appendicular and median skeletons and fin supports in E.punctifer larvae and juveniles,providing quantitative ontogenetic timelines to address gaps in engraulid developmental biology and contribute to teleost ontogeny research.Larval and juvenile specimens of E.punctifer;size range:3.00-34.56 mm standard length(SL)and notochord length(NL)collected from the Philippine Sea were processed using the standard Alizarin red and Alcian blue clearing-and-staining technique to differentiate ossified and cartilaginous elements.Specimens were examined under a stereo microscope and imaged with an HTC1600ISP digital camera for detailed morphological analysis of skeletal structures.Caudal complex development was evident by 5.55 mm NL,with the initial appearance of cartilaginous hypurals 1–2 and parhypural,followed by Hy3–5 at 6.08 mm NL.Cartilaginous Hy6 was visible by 9.58 mm SL in postflexion larvae.Six hypural bones were present from the postflexion to juvenile stage.Principal fin rays formed via intramembranous ossification at 6.32 mm NL,and segmentation was evident by 10.24 mm SL.Neural arch 1 appeared at 7.38 mm NL,preceding full haemal arch development.Uroneurals 1–2 and ural centra ossified by 9.58 mm SL,with Hy5 detached from U1 at 10.24 mm SL.Preural centra ossified before the arches.Epurals 1 and 2 were evident by 10.24 mm SL.Dorsal fin proximal radials developed anteriorly and distal radials posteriorly.Pectoral fin development initiated with an ossified cleithrum and the coracoscapular cartilage at 5.25 mm NL.By 10.24 mm SL,cartilaginous neural and haemal arches and spines were distinct.Uroneural 1 initially develops as cartilage.The formation of a pleurostyle aligns with clupeoid fish skeletal ontogeny.Dorsal and anal fin development follows a distinctive pattern,with variability in fin support development.Our results reveal accelerated caudal complex formation in E.punctifer and contribute new knowledge on the osteological characteristics of the genus Encrasicholina,and aid in understanding larval and juvenile ontogeny of marine teleosts.展开更多
Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2...Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.展开更多
Background:Chronic inflammation is closely associated with the most common and socially significant prostate conditions,including benign prostatic hyperplasia(BPH),prostate cancer(PCa),and prostatitis syndromes.NIHcat...Background:Chronic inflammation is closely associated with the most common and socially significant prostate conditions,including benign prostatic hyperplasia(BPH),prostate cancer(PCa),and prostatitis syndromes.NIHcategory IV prostatitis(histologic prostatitis,HP)is defined as asymptomatic chronic inflammation of the prostate.The presence of lymphoid follicles,referred to as tertiary lymphoid structures(TLSs),along with benign lympho-epithelial lesions(BLELs),is among the key histological indicators of immune inflammation and can be assessed relatively easily.This study aimed to quantitatively assess TLSs and BLELs,as well as their relationship with the severity of HP.Methods:We investigated TLSs and BLELs in 110 prostatic specimens,including inflammatory and normal tissues,within the context of common prostate pathologies such as BPH and PCa.HP was graded as low-grade(LG)or high-grade(HG)based on the severity of inflammation.Results:TLSs were observed in 51 out of 110 cases(46.4%),while BLELs were identified in 78 cases(70.44%).Both TLSs and BLELs co-occurred in 45 cases(40.9%).Statistical analysis revealed a significant correlation between the presence of TLSs,BLELs(individually or combined),and HG-HP(p<0.001).Conclusions:This study is the first to quantitatively evaluate the immunopathologic patterns in the inflamed human prostate by analyzing the presence and cooccurrence of TLSs and BLELs.Their formation,likely triggered by antigenic stimuli and external factors,indicates a chronic inflammatory microenvironment.The strong association between TLSs,BLELs,and HG-HP underscores their potential role in HP aggressiveness.These findings suggest that TLSs and BLELs may be crucial contributors to the pathophysiology and morphogenesis of NIH-category IV prostatitis.Furthermore,TLS/BLEL formation may represent a hallmark of tissue autoimmunity,reflecting the immune or autoimmune phase of this prostatitis subtype.展开更多
Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted dru...Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.展开更多
Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control mate...Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control material grading and achieve the desired mechanical properties.The current study explores the design and optimisation of FGCSs for AM,with a focus on improving the compression and impact performance of below knee(BK)prosthetic limbs made of thermoplastic polyurethane(TPU).A multiscale research methodology integrating topology optimization(TO),finite element analysis(FEA),and design of experiments(Do E)was adopted to optimise lattice structures in terms of stiffness and lightweight properties.Two-unit cell designs were considered in the study:Schwarz P gyroid and body-centered cubic(BCC).Response surface methodology(RSM)was implemented to analyse the effect of minimum and maximum cell wall thickness,cell size,and unit cell type on the mechanical performance of TPU FGCS structures.The results indicated that a Schwarz P FGCS structure with cell size,minimum and maximum cell wall thickness of 6,0.9 and 2.8 mm,respectively,could be optimal for a compromise between performance and weight.In this optimized case,stiffness and volume fraction values of 684 N/mm and 0.64 were obtained,respectively.The study also presents a proof-of-concept design for a BK prosthetic damper,highlighting the potential of FGCSs to enhance patient comfort,reduce manufacturing costs,and enable personalised designs through 3D scanning and AM.The obtained results could be a step forward towards the incorporation of AM technologies in prosthetics,offering a pathway to lightweight,cost-effective,and functionally tailored solutions.展开更多
Lithium manganese silicate(Li-Mn-Si-O)cathodes are key components of lithium-ion batteries,and their physical and mechanical properties are strongly influenced by their underlying crystal structures.In this study,a ra...Lithium manganese silicate(Li-Mn-Si-O)cathodes are key components of lithium-ion batteries,and their physical and mechanical properties are strongly influenced by their underlying crystal structures.In this study,a range of machine learning(ML)algorithms were developed and compared to predict the crystal systems of Li-Mn-Si-O cathode materials using density functional theory(DFT)data obtained from the Materials Project database.The dataset comprised 211 compositions characterized by key descriptors,including formation energy,energy above the hull,bandgap,atomic site number,density,and unit cell volume.These features were utilized to classify the materials into monoclinic(0)and triclinic(1)crystal systems.A comprehensive comparison of various classification algorithms including Decision Tree,Random Forest,XGBoost,Support VectorMachine,k-Nearest Neighbor,Stochastic Gradient Descent,Gaussian Naive Bayes,Gaussian Process,and Artificial Neural Network(ANN)was conducted.Among these,the optimized ANN architecture(6–14-14-14-1)exhibited the highest predictive performance,achieving an accuracy of 95.3%,aMatthews correlation coefficient(MCC)of 0.894,and an F-score of 0.963,demonstrating excellent consistency with DFT-predicted crystal structures.Meanwhile,RandomForest and Gaussian Processmodels also exhibited reliable and consistent predictive capability,indicating their potential as complementary approaches,particularly when data are limited or computational efficiency is required.This comparative framework provides valuable insights into model selection for crystal system classification in complex cathode materials.展开更多
Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is p...Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is proposed.The electric field applied between the template and the substrate drives the contact,tilting,filling,and holding processes.By accurately controlling the introduced included angle between the flexible template and the substrate,tilted nanostructures with a controllable angle are imprinted onto the substrate,although they are vertical on the template.By flexibly adjusting the electric field intensity and the included angle,large-area uniform-tilted,gradient-tilted,and high-angle-tilted nanostructures are fabricated.In contrast to traditional replication,the morphology of the nanoimprinting structure is extended to customized control.This work provides a cost-effective,efficient,and versatile technology for the fabrication of various large-area tilted metasurface structures.As an illustration,a tilted nanograting with a high coupling efficiency is fabricated and integrated into augmented reality displays,demonstrating superior imaging quality.展开更多
Chiral amino acids(AAs)serve as essential building blocks of proteins and play vital physiological roles in living organisms.To achieve accurate,rapid,and high-throughput analysis of chiral AAs,this work proposed a me...Chiral amino acids(AAs)serve as essential building blocks of proteins and play vital physiological roles in living organisms.To achieve accurate,rapid,and high-throughput analysis of chiral AAs,this work proposed a methylbenzyl isocyanate(MBIC)derivatization strategy coupled with ultra-high performance liquid chromatography-mass spectrometry or trapped ion mobility spectrometry-mass spectrometry.The integration of a chiral carbon atom with a rigid urea-based structure can significantly enhance the separation of chiral MBIC-labeled AA enantiomers.This phenomenon can be attributed to the labeled l-AAs allow the carboxyl group to form intramolecular hydrogen bonds with the amino group in the rigid urea-based structure,whereas labeled d-AAs are unable to form such bonds.The method based on MBIC derivatization coupled with ultra-performance liquid chromatography-tandem mass spectrometry achieved simultaneous separation of 19 pairs of chiral AAs using only a C18 column within 30 min,enabling quantitatively detect twelve types of chiral AAs in the serum of healthy humans and Parkinson's patients.The distribution of twenty-four chiral AAs is observed in mouse brain using MBIC labeling-based matrix-assisted laser desorption/ionization-trapped ion mobility spectrometry-mass spectrometry imaging without prior separation.Our work elucidates the principles governing the separation of chiral AAs using derivatization methods,providing valuable guidance for the separation of chiral compounds.展开更多
Structural Health Monitoring(SHM)plays a critical role in ensuring the safety,integrity,longevity and economic efficiency of civil infrastructures.The field has undergone a profound transformation over the last few de...Structural Health Monitoring(SHM)plays a critical role in ensuring the safety,integrity,longevity and economic efficiency of civil infrastructures.The field has undergone a profound transformation over the last few decades,evolving from traditional methods—often reliant on visual inspections—to data-driven intelligent systems.This review paper analyzes this historical trajectory,beginning with the approaches that relied on modal parameters as primary damage indicators.The advent of advanced sensor technologies and increased computational power brings a significant change,making Machine Learning(ML)a viable and powerful tool for damage assessment.More recently,Deep Learning(DL)has emerged as a paradigm shift,allowing for more automated processing of large data sets(such as the structural vibration signals and other types of sensors)with excellent performance and accuracy,often surpassing previous methods.This paper systematically reviews these technological milestones—from traditional vibration-based methods to the current state-of-the-art in deep learning.Finally,it critically examines emerging trends—such as Digital Twins and Transformer-based architectures—and discusses future research directions that will shape the next generation of SHM systems for civil engineering.展开更多
An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximatio...An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximation,forming a spectral-integrated neural network(SINN)scheme tailored for problems characterized by long-time evolution.Temporal derivatives are treated through a spectral integration strategy based on orthogonal polynomial expansions,which significantly alleviates stability constraints associated with conventional time-marching schemes.A fully connected neural network is employed to approximate the temperature-related variables,while governing equa-tions and boundary conditions are enforced through a physics-informed loss formulation.Numerical investigations demonstrate that the proposed method maintains high accuracy even when large time steps are adopted,where standard numerical solvers often suffer from instability or excessive computational cost.Moreover,the framework exhibits strong robustness for ultrathin configurations with extreme aspect ratios,achieving relative errors on the order of 10−5 or lower.These results indicate that the SINN framework provides a reliable and efficient alternative for transient thermal analysis of thin-walled structures under challenging computational conditions.展开更多
Soft pneumatic structures are promising for the actuation of soft machines,and substantial advances have occurred in their innovative design and functional verification.However,most pneumatic structures lack self-sens...Soft pneumatic structures are promising for the actuation of soft machines,and substantial advances have occurred in their innovative design and functional verification.However,most pneumatic structures lack self-sensing abilities,resulting in a lack of motion state feedback and difficulty in achieving real-time closed-loop control.Herein,a soft pneumatic composite structure(SPCS)with integrated actuation and sensing abilities is developed by combining a bellows-shaped magnetic elastomer and a wire structure.The SPCS can generate an induced voltage under deformation.The SPCS mechanical and magnetoelectric characteristics are studied comprehensively.The SPCS experimental maximum contraction is 27 mm,which is close to the theoretical and numerical results.When the SPCS is actuated by a pressure of-40 kPa,it will generate a peak induced voltage of 1.01 mV.With the increase in magnetic powder content and turns of the spiral wire,the induced voltage also increases.Additionally,two SPCSs are used to develop a self-sensing actuator,which can accurately perceive the bending direction and recognize the magnitude and direction of external force.A self-sensing soft gripper is developed,which can sense the grasping status and predict the width of grasped objects.Furthermore,a smart vehicle detection system composed of two SPCSs is proposed,which can detect the number,speed,and weight of passing vehicles.Consequently,the SPCS has numerous potential applications in soft sensors and self-sensing intelligent soft machines.展开更多
Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises stru...Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises structural weight under stress and frequency constraints.Two new algorithms,the Red Kite Optimization Algorithm(ROA)and Secretary Bird Optimization Algorithm(SBOA),are utilized on five benchmark trusses with 10,18,37,72,and 200-bar trusses.Both algorithms are evaluated against benchmarks in the literature.The results indicate that SBOA always reaches a lighter optimal.Designs with reducing structural weight ranging from 0.02%to 0.15%compared to ROA,and up to 6%–8%as compared to conventional algorithms.In addition,SBOA can achieve 15%–20%faster convergence speed and 10%–18%reduction in computational time with a smaller standard deviation over independent runs,which demonstrates its robustness and reliability.It is indicated that the adaptive exploration mechanism of SBOA,especially its Levy flight–based search strategy,can obviously improve optimization performance for low-and high-dimensional trusses.The research has implications in the context of promoting bio-inspired optimization techniques by demonstrating the viability of SBOA,a reliable model for large-scale structural design that provides significant enhancements in performance and convergence behavior.展开更多
This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A tempe...This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A temperature-indexed Concrete Damage Plasticity(CDP)framework incorporating bond–slip effects was developed in Abaqus to capture both global stress–strain responses and localized damage evolution.Uniaxial compression tests on thermally exposed cylinders provided residual strength data and failure observations for model calibration and validation.Results demonstrated a distinct two-stage degradation regime:moderate stiffness and strength reduction up to~400℃,followed by sharp deterioration beyond 500℃–600℃,with residual capacity at 700℃reduced to~20%–25%of the ambient value.Strain–damage analyses revealed the formation of a peripheral tensile strain band,which thickened and propagated inward with increasing temperature,governing crack initiation and cover spalling.Supplemental analyses highlighted that transverse reinforcement improved ductility and damage distribution at moderate temperatures(~300℃),but bond deterioration and steel softening beyond~600℃substantially diminished confinement effectiveness.The proposed CDP model accurately reproduced experimental stress–strain curves(R^(2)≈0.94–0.98 up to 600℃;≈0.90 at 700℃),with peak stress errors within 7%–10%and energy absorption captured within~12%.These findings confirm the robustness of the temperature-indexed CDP framework for simulating fire-damaged reinforced concrete and provide practical guidelines for post-fire assessment,spalling detection,and fire-resilient design of structural members.展开更多
With the in-depth implementation of sustainable development strategies,hydrogen energy as a clean energy source is receiving increasing attention[1,2].Among the various methods of hydrogen production,the electrocataly...With the in-depth implementation of sustainable development strategies,hydrogen energy as a clean energy source is receiving increasing attention[1,2].Among the various methods of hydrogen production,the electrocatalytic decomposition of abundant seawater into hydrogen utilizing renewable energy has emerged as a green and promising approach.However,natural seawater contains complex components,such as halide ions,which lead to the corrosion of catalysts or the occurrence of competitive side reactions during the electrolysis process[3].展开更多
An analysis is conducted on the hydrodynamic response law of a single module maritime airport,considering the atmospheric variables of the wind and wave field.The analysis is based on hydroelastic theory and focuses o...An analysis is conducted on the hydrodynamic response law of a single module maritime airport,considering the atmospheric variables of the wind and wave field.The analysis is based on hydroelastic theory and focuses on the typhoon-driven very large floating structures(VLFS)configuration of the maritime airport.The findings indicate that the proposed method enables efficient information exchange between the fluid and structure domains through the coupling interface.The displacement of the maritime airport affected by the typhoon’s wave field is mostly determined by the direction of the flow.The wave loads acting on the floating body also influence the wave profile of the irregular wave and the deformation of the floating body.The von Mises stress distribution is not significant in all parts of the floating body.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12432005 and 12472116)the Fundamental Research Funds for the Central Universities(DUTZD25240).
文摘Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimization method grounded in the global adjustment of nodal coordinates.First,a build direction is selected to minimize the number of violating struts.Then,an angular-constraint matrix is assembled from strut direction vectors,and analytical sensitivities with respect to nodal coordinates are derived to enable efficient constrained optimization under nonlinear angular inequality constraints.Numerical studies on two complex curved-surface lattices demonstrate that all overhang violations are eliminated while only minor changes are induced in global stiffness and strength.In particular,the maximum displacement of an ergonomic insole varies by only 2.87%after optimization.The results confirm the method’s versatility and engineering robustness,providing a practical approach for additive manufacturing-oriented lattice structure design.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
基金supported by the National Key R&D Program of China(Grant No.2019YFC1509703)the Tianjin Science and Technology Program Project(Grant No.23YFYSHZ00130)。
文摘Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.
基金supported by the Khalifa University of Science and Technology internal grants(Nos.2021-CIRA-109,2020-CIRA-007,and 2020-CIRA-024).
文摘Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-inspired lattice structures feature a square-grid 2D lattice with double diagonal bracings and are additively manufactured via digital light processing(DLP).The collapse strength and energy absorption capacity of sea sponge lattice structures are evaluated under various impact conditions and are compared to those of their constituent square-grid and double diagonal lattices.This study demonstrates that sea sponge lattices can achieve an 11-fold increase in energy absorption compared to the square-grid lattice,due to the stabilizing effect of the double diagonal bracings prompting the structure to collapse layer-bylayer under impact.By adjusting the thickness ratio in the sea sponge lattice,up to 76.7%increment in energy absorption is attained.It is also shown that sea-sponge lattices outperform well-established energy-absorbing materials of equal weight,such as hexagonal honeycombs,confirming their significant potential for impact mitigation.Additionally,this research highlights the enhancements in energy absorption achieved by adding a small amount(0.015 phr)of Multi-Walled Carbon Nanotubes(MWCNTs)to the photocurable resin,thus unlocking new possibilities for the design of innovative lightweight structures with multifunctional attributes.
文摘Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet little is known about its osteological development characteristics.Understanding these ontogenetic patterns is essential for explaining phylogenetic relationships within Clupeiformes,informing larval identification in ichthyoplankton surveys,and enhancing aquaculture practices.This study describes the ontogenetic characteristics of the appendicular and median skeletons and fin supports in E.punctifer larvae and juveniles,providing quantitative ontogenetic timelines to address gaps in engraulid developmental biology and contribute to teleost ontogeny research.Larval and juvenile specimens of E.punctifer;size range:3.00-34.56 mm standard length(SL)and notochord length(NL)collected from the Philippine Sea were processed using the standard Alizarin red and Alcian blue clearing-and-staining technique to differentiate ossified and cartilaginous elements.Specimens were examined under a stereo microscope and imaged with an HTC1600ISP digital camera for detailed morphological analysis of skeletal structures.Caudal complex development was evident by 5.55 mm NL,with the initial appearance of cartilaginous hypurals 1–2 and parhypural,followed by Hy3–5 at 6.08 mm NL.Cartilaginous Hy6 was visible by 9.58 mm SL in postflexion larvae.Six hypural bones were present from the postflexion to juvenile stage.Principal fin rays formed via intramembranous ossification at 6.32 mm NL,and segmentation was evident by 10.24 mm SL.Neural arch 1 appeared at 7.38 mm NL,preceding full haemal arch development.Uroneurals 1–2 and ural centra ossified by 9.58 mm SL,with Hy5 detached from U1 at 10.24 mm SL.Preural centra ossified before the arches.Epurals 1 and 2 were evident by 10.24 mm SL.Dorsal fin proximal radials developed anteriorly and distal radials posteriorly.Pectoral fin development initiated with an ossified cleithrum and the coracoscapular cartilage at 5.25 mm NL.By 10.24 mm SL,cartilaginous neural and haemal arches and spines were distinct.Uroneural 1 initially develops as cartilage.The formation of a pleurostyle aligns with clupeoid fish skeletal ontogeny.Dorsal and anal fin development follows a distinctive pattern,with variability in fin support development.Our results reveal accelerated caudal complex formation in E.punctifer and contribute new knowledge on the osteological characteristics of the genus Encrasicholina,and aid in understanding larval and juvenile ontogeny of marine teleosts.
文摘Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.
文摘Background:Chronic inflammation is closely associated with the most common and socially significant prostate conditions,including benign prostatic hyperplasia(BPH),prostate cancer(PCa),and prostatitis syndromes.NIHcategory IV prostatitis(histologic prostatitis,HP)is defined as asymptomatic chronic inflammation of the prostate.The presence of lymphoid follicles,referred to as tertiary lymphoid structures(TLSs),along with benign lympho-epithelial lesions(BLELs),is among the key histological indicators of immune inflammation and can be assessed relatively easily.This study aimed to quantitatively assess TLSs and BLELs,as well as their relationship with the severity of HP.Methods:We investigated TLSs and BLELs in 110 prostatic specimens,including inflammatory and normal tissues,within the context of common prostate pathologies such as BPH and PCa.HP was graded as low-grade(LG)or high-grade(HG)based on the severity of inflammation.Results:TLSs were observed in 51 out of 110 cases(46.4%),while BLELs were identified in 78 cases(70.44%).Both TLSs and BLELs co-occurred in 45 cases(40.9%).Statistical analysis revealed a significant correlation between the presence of TLSs,BLELs(individually or combined),and HG-HP(p<0.001).Conclusions:This study is the first to quantitatively evaluate the immunopathologic patterns in the inflamed human prostate by analyzing the presence and cooccurrence of TLSs and BLELs.Their formation,likely triggered by antigenic stimuli and external factors,indicates a chronic inflammatory microenvironment.The strong association between TLSs,BLELs,and HG-HP underscores their potential role in HP aggressiveness.These findings suggest that TLSs and BLELs may be crucial contributors to the pathophysiology and morphogenesis of NIH-category IV prostatitis.Furthermore,TLS/BLEL formation may represent a hallmark of tissue autoimmunity,reflecting the immune or autoimmune phase of this prostatitis subtype.
文摘Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.
基金financially supported and funded by the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University(IMSIU)(No.IMSIU-DDRSP2503)。
文摘Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control material grading and achieve the desired mechanical properties.The current study explores the design and optimisation of FGCSs for AM,with a focus on improving the compression and impact performance of below knee(BK)prosthetic limbs made of thermoplastic polyurethane(TPU).A multiscale research methodology integrating topology optimization(TO),finite element analysis(FEA),and design of experiments(Do E)was adopted to optimise lattice structures in terms of stiffness and lightweight properties.Two-unit cell designs were considered in the study:Schwarz P gyroid and body-centered cubic(BCC).Response surface methodology(RSM)was implemented to analyse the effect of minimum and maximum cell wall thickness,cell size,and unit cell type on the mechanical performance of TPU FGCS structures.The results indicated that a Schwarz P FGCS structure with cell size,minimum and maximum cell wall thickness of 6,0.9 and 2.8 mm,respectively,could be optimal for a compromise between performance and weight.In this optimized case,stiffness and volume fraction values of 684 N/mm and 0.64 were obtained,respectively.The study also presents a proof-of-concept design for a BK prosthetic damper,highlighting the potential of FGCSs to enhance patient comfort,reduce manufacturing costs,and enable personalised designs through 3D scanning and AM.The obtained results could be a step forward towards the incorporation of AM technologies in prosthetics,offering a pathway to lightweight,cost-effective,and functionally tailored solutions.
基金supported by the Learning&Academic Research Institution for Master’s,PhD students,and Postdocs LAMP Program of the National Research Foundation of Korea(NRF)grant funded by the Ministry of Education(No.RS-2023-00301974)This work was also supported by the Glocal University 30 Project fund of Gyeongsang National University in 2025.
文摘Lithium manganese silicate(Li-Mn-Si-O)cathodes are key components of lithium-ion batteries,and their physical and mechanical properties are strongly influenced by their underlying crystal structures.In this study,a range of machine learning(ML)algorithms were developed and compared to predict the crystal systems of Li-Mn-Si-O cathode materials using density functional theory(DFT)data obtained from the Materials Project database.The dataset comprised 211 compositions characterized by key descriptors,including formation energy,energy above the hull,bandgap,atomic site number,density,and unit cell volume.These features were utilized to classify the materials into monoclinic(0)and triclinic(1)crystal systems.A comprehensive comparison of various classification algorithms including Decision Tree,Random Forest,XGBoost,Support VectorMachine,k-Nearest Neighbor,Stochastic Gradient Descent,Gaussian Naive Bayes,Gaussian Process,and Artificial Neural Network(ANN)was conducted.Among these,the optimized ANN architecture(6–14-14-14-1)exhibited the highest predictive performance,achieving an accuracy of 95.3%,aMatthews correlation coefficient(MCC)of 0.894,and an F-score of 0.963,demonstrating excellent consistency with DFT-predicted crystal structures.Meanwhile,RandomForest and Gaussian Processmodels also exhibited reliable and consistent predictive capability,indicating their potential as complementary approaches,particularly when data are limited or computational efficiency is required.This comparative framework provides valuable insights into model selection for crystal system classification in complex cathode materials.
基金supported by National Natural Science Foundation of China(No.52025055 and 52275571)Basic Research Operation Fund of China(No.xzy012024024).
文摘Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is proposed.The electric field applied between the template and the substrate drives the contact,tilting,filling,and holding processes.By accurately controlling the introduced included angle between the flexible template and the substrate,tilted nanostructures with a controllable angle are imprinted onto the substrate,although they are vertical on the template.By flexibly adjusting the electric field intensity and the included angle,large-area uniform-tilted,gradient-tilted,and high-angle-tilted nanostructures are fabricated.In contrast to traditional replication,the morphology of the nanoimprinting structure is extended to customized control.This work provides a cost-effective,efficient,and versatile technology for the fabrication of various large-area tilted metasurface structures.As an illustration,a tilted nanograting with a high coupling efficiency is fabricated and integrated into augmented reality displays,demonstrating superior imaging quality.
基金supported by the National Natural Science Foundation of China(Nos.22404023,22274021,and 22036001).
文摘Chiral amino acids(AAs)serve as essential building blocks of proteins and play vital physiological roles in living organisms.To achieve accurate,rapid,and high-throughput analysis of chiral AAs,this work proposed a methylbenzyl isocyanate(MBIC)derivatization strategy coupled with ultra-high performance liquid chromatography-mass spectrometry or trapped ion mobility spectrometry-mass spectrometry.The integration of a chiral carbon atom with a rigid urea-based structure can significantly enhance the separation of chiral MBIC-labeled AA enantiomers.This phenomenon can be attributed to the labeled l-AAs allow the carboxyl group to form intramolecular hydrogen bonds with the amino group in the rigid urea-based structure,whereas labeled d-AAs are unable to form such bonds.The method based on MBIC derivatization coupled with ultra-performance liquid chromatography-tandem mass spectrometry achieved simultaneous separation of 19 pairs of chiral AAs using only a C18 column within 30 min,enabling quantitatively detect twelve types of chiral AAs in the serum of healthy humans and Parkinson's patients.The distribution of twenty-four chiral AAs is observed in mouse brain using MBIC labeling-based matrix-assisted laser desorption/ionization-trapped ion mobility spectrometry-mass spectrometry imaging without prior separation.Our work elucidates the principles governing the separation of chiral AAs using derivatization methods,providing valuable guidance for the separation of chiral compounds.
基金The authors would like to thank CNPq(Conselho Nacional de Desenvolvimento Científico e Tecnológico)—grants 407256/2022-9,303550/2025-2,402533/2023-2 and 303982/2022-5FAPEMIG(Fundação de AmparoàPesquisa do Estado de Minas Gerais)—grants APQ-00032-24 and APD-01113-25 for their financial support.
文摘Structural Health Monitoring(SHM)plays a critical role in ensuring the safety,integrity,longevity and economic efficiency of civil infrastructures.The field has undergone a profound transformation over the last few decades,evolving from traditional methods—often reliant on visual inspections—to data-driven intelligent systems.This review paper analyzes this historical trajectory,beginning with the approaches that relied on modal parameters as primary damage indicators.The advent of advanced sensor technologies and increased computational power brings a significant change,making Machine Learning(ML)a viable and powerful tool for damage assessment.More recently,Deep Learning(DL)has emerged as a paradigm shift,allowing for more automated processing of large data sets(such as the structural vibration signals and other types of sensors)with excellent performance and accuracy,often surpassing previous methods.This paper systematically reviews these technological milestones—from traditional vibration-based methods to the current state-of-the-art in deep learning.Finally,it critically examines emerging trends—such as Digital Twins and Transformer-based architectures—and discusses future research directions that will shape the next generation of SHM systems for civil engineering.
基金supported by the National Natural Science Foundation of China(Nos.12422207 and 12372199).
文摘An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximation,forming a spectral-integrated neural network(SINN)scheme tailored for problems characterized by long-time evolution.Temporal derivatives are treated through a spectral integration strategy based on orthogonal polynomial expansions,which significantly alleviates stability constraints associated with conventional time-marching schemes.A fully connected neural network is employed to approximate the temperature-related variables,while governing equa-tions and boundary conditions are enforced through a physics-informed loss formulation.Numerical investigations demonstrate that the proposed method maintains high accuracy even when large time steps are adopted,where standard numerical solvers often suffer from instability or excessive computational cost.Moreover,the framework exhibits strong robustness for ultrathin configurations with extreme aspect ratios,achieving relative errors on the order of 10−5 or lower.These results indicate that the SINN framework provides a reliable and efficient alternative for transient thermal analysis of thin-walled structures under challenging computational conditions.
基金supported by the National Natural Science Foundation of China(Grant No.52405267)the Jiangxi Provincial Natural Science Foundation(Grant Nos.20242BAB25257,20232BAB214050)+1 种基金the China Postdoctoral Science Foundation(Grant No.2024M760877)the Natural Science Foundation of Hunan Province(Grant No.2025JJ60369)。
文摘Soft pneumatic structures are promising for the actuation of soft machines,and substantial advances have occurred in their innovative design and functional verification.However,most pneumatic structures lack self-sensing abilities,resulting in a lack of motion state feedback and difficulty in achieving real-time closed-loop control.Herein,a soft pneumatic composite structure(SPCS)with integrated actuation and sensing abilities is developed by combining a bellows-shaped magnetic elastomer and a wire structure.The SPCS can generate an induced voltage under deformation.The SPCS mechanical and magnetoelectric characteristics are studied comprehensively.The SPCS experimental maximum contraction is 27 mm,which is close to the theoretical and numerical results.When the SPCS is actuated by a pressure of-40 kPa,it will generate a peak induced voltage of 1.01 mV.With the increase in magnetic powder content and turns of the spiral wire,the induced voltage also increases.Additionally,two SPCSs are used to develop a self-sensing actuator,which can accurately perceive the bending direction and recognize the magnitude and direction of external force.A self-sensing soft gripper is developed,which can sense the grasping status and predict the width of grasped objects.Furthermore,a smart vehicle detection system composed of two SPCSs is proposed,which can detect the number,speed,and weight of passing vehicles.Consequently,the SPCS has numerous potential applications in soft sensors and self-sensing intelligent soft machines.
文摘Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises structural weight under stress and frequency constraints.Two new algorithms,the Red Kite Optimization Algorithm(ROA)and Secretary Bird Optimization Algorithm(SBOA),are utilized on five benchmark trusses with 10,18,37,72,and 200-bar trusses.Both algorithms are evaluated against benchmarks in the literature.The results indicate that SBOA always reaches a lighter optimal.Designs with reducing structural weight ranging from 0.02%to 0.15%compared to ROA,and up to 6%–8%as compared to conventional algorithms.In addition,SBOA can achieve 15%–20%faster convergence speed and 10%–18%reduction in computational time with a smaller standard deviation over independent runs,which demonstrates its robustness and reliability.It is indicated that the adaptive exploration mechanism of SBOA,especially its Levy flight–based search strategy,can obviously improve optimization performance for low-and high-dimensional trusses.The research has implications in the context of promoting bio-inspired optimization techniques by demonstrating the viability of SBOA,a reliable model for large-scale structural design that provides significant enhancements in performance and convergence behavior.
文摘This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A temperature-indexed Concrete Damage Plasticity(CDP)framework incorporating bond–slip effects was developed in Abaqus to capture both global stress–strain responses and localized damage evolution.Uniaxial compression tests on thermally exposed cylinders provided residual strength data and failure observations for model calibration and validation.Results demonstrated a distinct two-stage degradation regime:moderate stiffness and strength reduction up to~400℃,followed by sharp deterioration beyond 500℃–600℃,with residual capacity at 700℃reduced to~20%–25%of the ambient value.Strain–damage analyses revealed the formation of a peripheral tensile strain band,which thickened and propagated inward with increasing temperature,governing crack initiation and cover spalling.Supplemental analyses highlighted that transverse reinforcement improved ductility and damage distribution at moderate temperatures(~300℃),but bond deterioration and steel softening beyond~600℃substantially diminished confinement effectiveness.The proposed CDP model accurately reproduced experimental stress–strain curves(R^(2)≈0.94–0.98 up to 600℃;≈0.90 at 700℃),with peak stress errors within 7%–10%and energy absorption captured within~12%.These findings confirm the robustness of the temperature-indexed CDP framework for simulating fire-damaged reinforced concrete and provide practical guidelines for post-fire assessment,spalling detection,and fire-resilient design of structural members.
基金financially supported by the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(No.NY223016)Qinglan Project of Jiangsu Province of China2024 Nanjing Science and Technology Innovation Program(No.NJKCZYZZ2024-06)。
文摘With the in-depth implementation of sustainable development strategies,hydrogen energy as a clean energy source is receiving increasing attention[1,2].Among the various methods of hydrogen production,the electrocatalytic decomposition of abundant seawater into hydrogen utilizing renewable energy has emerged as a green and promising approach.However,natural seawater contains complex components,such as halide ions,which lead to the corrosion of catalysts or the occurrence of competitive side reactions during the electrolysis process[3].
基金supported in part by the National Natural Science Foundation of China(No.51761165022)the Natural Science Foundation of Jiangsu Province(No.BK20210309)the Jiangsu Graduate Research and Practice Innovation Program(No.KYCX21_0234)。
文摘An analysis is conducted on the hydrodynamic response law of a single module maritime airport,considering the atmospheric variables of the wind and wave field.The analysis is based on hydroelastic theory and focuses on the typhoon-driven very large floating structures(VLFS)configuration of the maritime airport.The findings indicate that the proposed method enables efficient information exchange between the fluid and structure domains through the coupling interface.The displacement of the maritime airport affected by the typhoon’s wave field is mostly determined by the direction of the flow.The wave loads acting on the floating body also influence the wave profile of the irregular wave and the deformation of the floating body.The von Mises stress distribution is not significant in all parts of the floating body.
