The high safety of aqueous magnesium ion batteries(AMIBs)contrasts with their limited electrochemical performance.To overcome electrolyte-induced parasitic reactions,it is essential to understand the dynamic evolution...The high safety of aqueous magnesium ion batteries(AMIBs)contrasts with their limited electrochemical performance.To overcome electrolyte-induced parasitic reactions,it is essential to understand the dynamic evolution of concentration-dependent metal ion solvation structures(MISSs).This study systematically reveals the solvation structure evolution of MgCl_(2) aqueous solutions across a full concentration range(0-30 M)and its impact on electrochemical properties using molecular dynamics simulations and density functional theory calculations.Results indicate that six characteristic solvation configurations exist,exhibiting a dynamic,concentration-dependent inter-evolution defined as the solvation structure evolutionary processes(SSEP).The four-phase glass transition mechanism in solvation structure evolution is revealed by analyzing the percentage of each type of solvation structure in different concentrations.The study shows that conductivity is directly related to the dynamic transitions of dominant solvation structures,with a shift in the Mg^(2+) coordination mode—from octahedral through pentahedral intermediates to tetrahedral—revealing a concentration-dependent ion transport mechanism.At low concentrations,free-state stochastic diffusion predominates,reaching a maximum conductivity before transitioning to relay transport within a restricted network at high concentrations.Key contributions include:a general strategy for electrolyte design based on the solvation structure evolution process,which quantitatively correlates structural occupancy with migration properties,and the“Concentration Window”regulation model that balances high conductivity with reduced side reactions.These findings clarify the structural origins of anomalous conductivity in highly concentrated electrolytes and establish a mapping between microstructural evolution and macroscopic performance,providing a theoretical basis for engineering high-security electrolytes of AMIBs.展开更多
With the continuous expansion of digital infrastructures,malicious behaviors in host systems have become increasingly sophisticated,often spanning multiple processes and employing obfuscation techniques to evade detec...With the continuous expansion of digital infrastructures,malicious behaviors in host systems have become increasingly sophisticated,often spanning multiple processes and employing obfuscation techniques to evade detection.Audit logs,such as Sysmon,offer valuable insights;however,existing approaches typically flatten event sequences or rely on generic graph models,thereby discarding the natural parent-child process hierarchy that is critical for analyzing multiprocess attacks.This paper proposes a structure-aware threat detection framework that transforms audit logs into a unified two-dimensional(2D)spatio-temporal representation,where process hierarchy is modeled as the spatial axis and event chronology as the temporal axis.In addition,entropy-based features are incorporated to robustly capture obfuscated and non-linguistic strings,overcoming the limitations of semantic embeddings.The model’s performance was evaluated on publicly available datasets,achieving competitive results with an accuracy exceeding 95%and an F1-score of at least 0.94.The proposed approach provides a promising and reproducible solution for detecting attacks with unknown indicators of compromise(IoCs)by analyzing the relationships and behaviors of processes recorded in large-scale audit logs.展开更多
Based on the cognitive radar concept and the basic connotation of cognitive skywave over-the-horizon radar（SWOTHR）, the system structure and information processingmechanism about cognitive SWOTHR are researched. Amo...Based on the cognitive radar concept and the basic connotation of cognitive skywave over-the-horizon radar（SWOTHR）, the system structure and information processingmechanism about cognitive SWOTHR are researched. Amongthem, the hybrid network system architecture which is thedistributed configuration combining with the centralized cognition and its soft/hardware framework with the sense-detectionintegration are proposed, and the information processing framebased on the lens principle and its information processing flowwith receive-transmit joint adaption are designed, which buildand parse the work law for cognition and its self feedback adjustment with the lens focus model and five stages informationprocessing sequence. After that, the system simulation andthe performance analysis and comparison are provided, whichinitially proves the rationality and advantages of the proposedideas. Finally, four important development ideas of futureSWOTHR toward ＂high frequency intelligence information processing system＂ are discussed, which are scene information fusion, dynamic reconfigurable system, hierarchical and modulardesign, and sustainable development. Then the conclusion thatthe cognitive SWOTHR can cause the performance improvement is gotten.展开更多
The relevant standards of the automobile industry have important guiding significance for the positive R & D and test certification of automobile products. However, the current information content of the relevant ...The relevant standards of the automobile industry have important guiding significance for the positive R & D and test certification of automobile products. However, the current information content of the relevant standards of the automobile industry is large, so it is difficult for enterprises to realize centralized management of resources, structured processing, and convenient positioning of key information and so on and thus unable to effectively respond to the standards. This paper mainly studies and analyzes the construction method of standard item database based on automobile forward R & D system. Through the integration and mining of standard data, it focuses on the analysis of the corresponding relationship among standards, items, parts, special effective date and other information, and establishes the standard information association model, so as to provide standard application of data support for the R & D, design, test and certification of automobile products to help enterprises improve the efficiency of standard response and reduce the cost of R & D and certification.展开更多
A novel co-rotating electrochemical machining method is proposed for fabricating convex structures on the inner surface of a revolving part.The electrodes motion and material removal method of co-rotating electrochemi...A novel co-rotating electrochemical machining method is proposed for fabricating convex structures on the inner surface of a revolving part.The electrodes motion and material removal method of co-rotating electrochemical machining are different from traditional electrochemical machining.An equivalent kinematic model is established to analyze the novel electrodes motion,since the anode and cathode rotate in the same direction while the cathode simultaneously feeds along the line of centres.According to the kinematic equations of the electrodes and Faraday’s law,a material removal model is established to simulate the evolution of the anode profile in co-rotating electrochemical machining.The simulation results indicate that the machining accuracy of the convex structure is strongly affected by the angular velocity ratio and the radius of the cathode tool.An increase of the angular velocity ratio can improve the machining accuracy of a convex structure.A small difference in the radius of the cathode tool will cause changes in the shape of the sidewalls of the convex structure.The width of the cathode window affects only the width of the convex structure and the inclination a of the sidewall.A relation between the width of the cathode window and the width of the convex structure was obtained.The formation process for a convex structure under electrochemical dissolution was revealed.Based on the simulation results,the optimal angular velocity ratio and cathode radius were selected for an experimental verification,and 12 convex structures were simultaneously fabricated on the inner surface of a thin-walled revolving part.The experimental results are in good agreement with the simulation results,which verifies the correctness of the theoretical analysis.Therefore,inner surface co-rotating electrochemical machining is an effective method for fabricating convex structures on the inner surface of a revolving part.展开更多
High-resolution laser additive manufacturing(LAM)significantly releases design free-dom,promoting the development of topology optimization(TO)and advancing structural design methods.In order to fully take advantage of...High-resolution laser additive manufacturing(LAM)significantly releases design free-dom,promoting the development of topology optimization(TO)and advancing structural design methods.In order to fully take advantage of voxelated forming methods and establish the quantitative relationship between the mechanical properties of printing components and multiple process factors(laser-and process-parameters),the concurrent optimization design method based on LAM should cover the process-performance relationship.This study proposes a novel artificial intelligence-facilitated TO method for LAM to concurrently design microscale material property and macroscale structural topology of 3D components by adopting heuristic and gradient-based algorithms.The process–structure–property relationship of selective laser sintering is established by the back propagation neural network,and it is integrated into the TO algorithm for providing a systematic design scheme of structural topology and process parameter.Compared with the classical optimization method,numerical examples show that this method is able to improve the mechanical performance of the macrostructure significantly.In addition,the collaborative design method is able to be widely applied for complex functional part design and optimization,as well as case studies on artificial intelligence-facilitated product evaluation.展开更多
The correctness of workflow models is one of the major challenges in context of workflow analysis. The aim of this paper is to provide an improved Petri net-based reduction approach for verifying the correctness of wo...The correctness of workflow models is one of the major challenges in context of workflow analysis. The aim of this paper is to provide an improved Petri net-based reduction approach for verifying the correctness of workflow models. To the end, how to represent well-behaved building blocks and control structures of business processes by Petri nets is given at first, and then how to build well-structured process nets is presented. According to the structural characteristics of well-structured process nets, a set of legacy reduction rules are improved and extended, and then a complete Petri-net-based verification approach is proposed. The sound ness and the complexity with polynomial time for the improved re duction method are also proven.展开更多
A biaxial stretching equipment was designed and constructed to enable fundamental studies of the relationship between film processing conditions and structures of oriented film products. With programmable drive motors...A biaxial stretching equipment was designed and constructed to enable fundamental studies of the relationship between film processing conditions and structures of oriented film products. With programmable drive motors and scissorlike mechanism, all stretching modes, including uniaxial stretching with constant and free width, simultaneous and sequential biaxial stretching, can be applied to a square-shaped sheet. Parameters related to film stretching manufacturing, such as temperature, draw ratio and stretching speed can be set independently to meet the requirement of different polymers. The force information during stretching is recorded by two miniature tension sensors in two directions independently, which can monitor the mechanical stimulus and stress response. Using this equipment, experiments are conducted to investigate the influence of stretching parameters on the structure of polypropylene films, which provides an effective method to tailor the processing conditions to obtain the films with desired properties.展开更多
Alarm flood is one of the main problems in the alarm systems of industrial process. Alarm root-cause analysis and alarm prioritization are good for alarm flood reduction. This paper proposes a systematic rationalizati...Alarm flood is one of the main problems in the alarm systems of industrial process. Alarm root-cause analysis and alarm prioritization are good for alarm flood reduction. This paper proposes a systematic rationalization method for multivariate correlated alarms to realize the root cause analysis and alarm prioritization. An information fusion based interpretive structural model is constructed according to the data-driven partial correlation coefficient calculation and process knowledge modification. This hierarchical multi-layer model is helpful in abnormality propagation path identification and root-cause analysis. Revised Likert scale method is adopted to determine the alarm priority and reduce the blindness of alarm handling. As a case study, the Tennessee Eastman process is utilized to show the effectiveness and validity of proposed approach. Alarm system performance comparison shows that our rationalization methodology can reduce the alarm flood to some extent and improve the performance.展开更多
In this paper, we study a class of ruin problems, in which premiums and claims are dependent. Under the assumption that premium income is a stochastic process, we raise the model that premiums and claims are dependent...In this paper, we study a class of ruin problems, in which premiums and claims are dependent. Under the assumption that premium income is a stochastic process, we raise the model that premiums and claims are dependent, give its numerical characteristics and the ruin probability of the individual risk model in the surplus process. In addition, we promote the number of insurance policies to a Poisson process with parameter λ, using martingale methods to obtain the upper bound of the ultimate ruin probability.展开更多
A cake layer is formed by coagulation aggregates under certain transmembrane pressure in the coagulation-microfiltration （MF） process. The characteristics of humic acid aggregates coagulated by different iron-based ...A cake layer is formed by coagulation aggregates under certain transmembrane pressure in the coagulation-microfiltration （MF） process. The characteristics of humic acid aggregates coagulated by different iron-based coagulants, such as charge, size, fractal dimension and compressibility, have an effect on the cake layer structure. At the optimum iron dose of 0.6 to 0.8 mmol/L for ferric chloride （FC） and polymer ferric sulfate （PFS） pre-coagulation, at the point of charge neutralization for near zero zeta potential, the aggregate particles produced possess the greatest size and highest fractal dimension, which contributes to the cake layer being most loose with high porosity and low compressibility. Thus the membrane filterability is better. At a low or high iron dose of FC and PFS, a high negative or positive zeta potential with high charge repulsion results in so many small aggregate particles and low fractal dimension that the cake layer is compact with low porosity and high compressibility. Therefore the membrane fouling is accelerated and MF permeability becomes worse. The variation of cake layer structure as measured by scanning electric microscopy corresponds with the fact that the smaller the coagulation flocs size and fractal dimension are, the lower the porosity and the tighter the cake layer conformation. This also explains the MF membrane flux variation visually and accurately.展开更多
In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. T...In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.展开更多
A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic response...A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic responses. In order to reduce structural vibration, it is important to obtain the modal parameters information of a ship. However, the traditional modal parameter identification methods are not suitable since the excitation information is difficult to obtain. Natural excitation technique-eigensystem realization algorithm （NExT-ERA） is an operational modal identification method which abstracts modal parameters only from the response signals, and it is based on the assumption that the input to the structure is pure white noise. Hence, it is necessary to study the influence of harmonic excitations while applying the NExT-ERA method to a ship structure. The results of this research paper indicate the practical experiences under ambient excitation, ship model experiments were successfully done in the modal parameters identification only when the harmonic frequencies were not too close to the modal frequencies.展开更多
Three dimensional models of shaft were completed on CATIA Part Design module with the Chinese national standard （GB） process structures such as chamfers, threads and tool withdrawal grooves, center holes, flat/woodr...Three dimensional models of shaft were completed on CATIA Part Design module with the Chinese national standard （GB） process structures such as chamfers, threads and tool withdrawal grooves, center holes, flat/woodruff/gib head taper keyseats, grinding undercuts, straight-sidedsplines, circlip slots and collars. The modeling steps are arranged in dialog menu interface by VB 6.0, the shaft creator, that permits users input geometric feature based parameters explicitly, and the standardized processdata are reorganized in Excel files that can be invoked correspondingly in the modeling procedure. It is aimed that this process may supply a simple way for shaft rapid modeling and comprehensive discipline for engineering students in their professional design activities.展开更多
Aiming at the problem that virtual machine information cannot be extracted incompletely, we extend the typical information extraction model of virtual machine and propose a perception mechanism in virtualization syste...Aiming at the problem that virtual machine information cannot be extracted incompletely, we extend the typical information extraction model of virtual machine and propose a perception mechanism in virtualization system based on storage covert channel to overcome the affection of the semantic gap. Taking advantage of undetectability of the covert channel, a secure channel is established between vip and virtual machine monitor to pass data directly. The vip machine can pass the control information of malicious process to virtual machine monitor by using the VMCALL instruction and shared memory. By parsing critical information in process control structure, virtual machine monitor can terminate the malicious processes. The test results show that the proposed mechanism can clear the user-level malicious programs in the virtual machine effectively and covertly. Meanwhile, its performance overhead is about the same as that of other mainstream monitoring mode.展开更多
The global trends towards improving fuel efficiency and reducing CO;emissions are the key drivers for lightweight solutions. In sheet metal processing, this can be achieved by the use of materials with a supreme stren...The global trends towards improving fuel efficiency and reducing CO;emissions are the key drivers for lightweight solutions. In sheet metal processing, this can be achieved by the use of materials with a supreme strength-toweight and stiffness-to-weight ratio. Besides monolithic materials such as high-strength or light metals, in particular metal–plastic composite sheets are able to provide outstanding mechanical properties. Thus, the adaption of conventional, wellestablished forming methods for the processing of hybrid sheet metals is a current challenge for the sheet metal working industry. In this work, the planning phase for a conventional sheet metal forming process is studied aiming at the forming of metal–plastic composite sheets. The single process steps like material characterization, FE analysis, tool design and development of robust process parameters are studied in detail and adapted to the specific properties of metal–plastic composites. In material characterization, the model of the hybrid laminate needs to represent not only the mechanical properties of the individual combined materials, but also needs to reflect the behaviour of the interface zone between them.Based on experience, there is a strong dependency on temperature as well as strain rate. While monolithic materials show a moderate anisotropic behaviour, loads on laminates in different directions generate different strain states and completely different failure modes. During the FE analysis, thermo-mechanic and thermo-dynamic effects influence the temperature distribution within tool and work pieces and subsequently the forming behaviour. During try out and production phase,those additional influencing factors are limiting the process window even more and therefore need to be considered for the design of a robust forming process. A roadmap for sheet metal forming adjusted to metal–plastic composites is presented in this paper.展开更多
In this article,the phenomenon of“information space”and its methods of study,its types,elementary structure and qualitative characteristics are discussed,the author’s definition of the concept of“information”is g...In this article,the phenomenon of“information space”and its methods of study,its types,elementary structure and qualitative characteristics are discussed,the author’s definition of the concept of“information”is given,the structure of the information process,and the phases,which are the basis for the evolution of the information space and the universe of human activity,are considered.展开更多
By means of scanning electron microscope(SEM)and high voltage electron microscope(HVEM)we have observed and analysed morphology and micro-structure of silicon oxide film with different thickness formed on(111)silicon ...By means of scanning electron microscope(SEM)and high voltage electron microscope(HVEM)we have observed and analysed morphology and micro-structure of silicon oxide film with different thickness formed on(111)silicon monocrystal under dry oxygen atmosphere at 1100℃.Compared with their oxidation kinetic curves consisted of three stages,we suggested a mechanism on forming silicon oxide film.According to electron and X-ray diffraction analyses the silicon oxide films consisted of silica with different crystal structure.We also have discussed a stacking fault and a dislocation formed in the Si-Sio_2 interface region simulaneously forming silicon oxide film.展开更多
The surface of Ni_（61）Nb_（39） crystalline ingot was treated by laser surface melting with different processing parameters.A fully amorphous layer with a thickness of approximately 10μm could be produced on the to...The surface of Ni_（61）Nb_（39） crystalline ingot was treated by laser surface melting with different processing parameters.A fully amorphous layer with a thickness of approximately 10μm could be produced on the top surface under optimal parameters.An amorphous-crystalline composite layer with the depth from 10 to 50μm,consisting of amorphous matrix and intermetallic phases of Ni_3 Nb and Ni_6Nb_7,could be formed.The micro-hardness（about 831HV）of the treated surface was remarkably improved by nearly 100% compared with the value of the crystalline substrate caused by the formation of the fully amorphous structure.A finite volume simulation was adopted to evaluate the temperature distribution in the laser-affected zone of Ni_（61）Nb_（39） alloys and to reveal the mechanism of glass formation in the laser-affected zone.展开更多
基金supported by the National Natural Science Foundation of China(No.11047164)the National Key Laboratory of Infrared Detection Technologies(No.IRDT-23-S01)the Shanghai Explorer Program(No.24TS1403400)。
文摘The high safety of aqueous magnesium ion batteries(AMIBs)contrasts with their limited electrochemical performance.To overcome electrolyte-induced parasitic reactions,it is essential to understand the dynamic evolution of concentration-dependent metal ion solvation structures(MISSs).This study systematically reveals the solvation structure evolution of MgCl_(2) aqueous solutions across a full concentration range(0-30 M)and its impact on electrochemical properties using molecular dynamics simulations and density functional theory calculations.Results indicate that six characteristic solvation configurations exist,exhibiting a dynamic,concentration-dependent inter-evolution defined as the solvation structure evolutionary processes(SSEP).The four-phase glass transition mechanism in solvation structure evolution is revealed by analyzing the percentage of each type of solvation structure in different concentrations.The study shows that conductivity is directly related to the dynamic transitions of dominant solvation structures,with a shift in the Mg^(2+) coordination mode—from octahedral through pentahedral intermediates to tetrahedral—revealing a concentration-dependent ion transport mechanism.At low concentrations,free-state stochastic diffusion predominates,reaching a maximum conductivity before transitioning to relay transport within a restricted network at high concentrations.Key contributions include:a general strategy for electrolyte design based on the solvation structure evolution process,which quantitatively correlates structural occupancy with migration properties,and the“Concentration Window”regulation model that balances high conductivity with reduced side reactions.These findings clarify the structural origins of anomalous conductivity in highly concentrated electrolytes and establish a mapping between microstructural evolution and macroscopic performance,providing a theoretical basis for engineering high-security electrolytes of AMIBs.
基金supported by the Nuclear Safety Research Program through Korea Foundation of Nuclear Safety(KoFONS)using the financial resource granted by the Nuclear Safety and Security Commission(NSSC)of the Republic of Korea(Grant number:2106061,50%)supported by the Institute of Information&Communications Technology Planning&Evaluation(IITP)grant funded by the Korea government(MSIT)(RS-2025-25394739,Development of Security Enhancement Technology for Industrial Control Systems Based on S/HBOM Supply Chain Protection,50%).
文摘With the continuous expansion of digital infrastructures,malicious behaviors in host systems have become increasingly sophisticated,often spanning multiple processes and employing obfuscation techniques to evade detection.Audit logs,such as Sysmon,offer valuable insights;however,existing approaches typically flatten event sequences or rely on generic graph models,thereby discarding the natural parent-child process hierarchy that is critical for analyzing multiprocess attacks.This paper proposes a structure-aware threat detection framework that transforms audit logs into a unified two-dimensional(2D)spatio-temporal representation,where process hierarchy is modeled as the spatial axis and event chronology as the temporal axis.In addition,entropy-based features are incorporated to robustly capture obfuscated and non-linguistic strings,overcoming the limitations of semantic embeddings.The model’s performance was evaluated on publicly available datasets,achieving competitive results with an accuracy exceeding 95%and an F1-score of at least 0.94.The proposed approach provides a promising and reproducible solution for detecting attacks with unknown indicators of compromise(IoCs)by analyzing the relationships and behaviors of processes recorded in large-scale audit logs.
基金supported by the National Natural Science Foundation of China(61471391)the China Postdoctoral Science Foundation(2013M542541)
文摘Based on the cognitive radar concept and the basic connotation of cognitive skywave over-the-horizon radar（SWOTHR）, the system structure and information processingmechanism about cognitive SWOTHR are researched. Amongthem, the hybrid network system architecture which is thedistributed configuration combining with the centralized cognition and its soft/hardware framework with the sense-detectionintegration are proposed, and the information processing framebased on the lens principle and its information processing flowwith receive-transmit joint adaption are designed, which buildand parse the work law for cognition and its self feedback adjustment with the lens focus model and five stages informationprocessing sequence. After that, the system simulation andthe performance analysis and comparison are provided, whichinitially proves the rationality and advantages of the proposedideas. Finally, four important development ideas of futureSWOTHR toward ＂high frequency intelligence information processing system＂ are discussed, which are scene information fusion, dynamic reconfigurable system, hierarchical and modulardesign, and sustainable development. Then the conclusion thatthe cognitive SWOTHR can cause the performance improvement is gotten.
文摘The relevant standards of the automobile industry have important guiding significance for the positive R & D and test certification of automobile products. However, the current information content of the relevant standards of the automobile industry is large, so it is difficult for enterprises to realize centralized management of resources, structured processing, and convenient positioning of key information and so on and thus unable to effectively respond to the standards. This paper mainly studies and analyzes the construction method of standard item database based on automobile forward R & D system. Through the integration and mining of standard data, it focuses on the analysis of the corresponding relationship among standards, items, parts, special effective date and other information, and establishes the standard information association model, so as to provide standard application of data support for the R & D, design, test and certification of automobile products to help enterprises improve the efficiency of standard response and reduce the cost of R & D and certification.
基金supported by the National Natural Science Foundation of China(No.52175414)National Natural Science Foundation of China for Creative Research Groups(No.51921003)the China Postdoctoral Science Foundation(No.2019M661833).
文摘A novel co-rotating electrochemical machining method is proposed for fabricating convex structures on the inner surface of a revolving part.The electrodes motion and material removal method of co-rotating electrochemical machining are different from traditional electrochemical machining.An equivalent kinematic model is established to analyze the novel electrodes motion,since the anode and cathode rotate in the same direction while the cathode simultaneously feeds along the line of centres.According to the kinematic equations of the electrodes and Faraday’s law,a material removal model is established to simulate the evolution of the anode profile in co-rotating electrochemical machining.The simulation results indicate that the machining accuracy of the convex structure is strongly affected by the angular velocity ratio and the radius of the cathode tool.An increase of the angular velocity ratio can improve the machining accuracy of a convex structure.A small difference in the radius of the cathode tool will cause changes in the shape of the sidewalls of the convex structure.The width of the cathode window affects only the width of the convex structure and the inclination a of the sidewall.A relation between the width of the cathode window and the width of the convex structure was obtained.The formation process for a convex structure under electrochemical dissolution was revealed.Based on the simulation results,the optimal angular velocity ratio and cathode radius were selected for an experimental verification,and 12 convex structures were simultaneously fabricated on the inner surface of a thin-walled revolving part.The experimental results are in good agreement with the simulation results,which verifies the correctness of the theoretical analysis.Therefore,inner surface co-rotating electrochemical machining is an effective method for fabricating convex structures on the inner surface of a revolving part.
基金supported by National Natural Science Foundation of China(U1930207)Key Project of National Natural Science Foundation of China(51790171)+2 种基金National Natural Science Foundation of China for Excellent Young Scholars(11722219)National Natural Science Foundation of China for Young Scholars(51905439)111 Project(B21013)。
文摘High-resolution laser additive manufacturing(LAM)significantly releases design free-dom,promoting the development of topology optimization(TO)and advancing structural design methods.In order to fully take advantage of voxelated forming methods and establish the quantitative relationship between the mechanical properties of printing components and multiple process factors(laser-and process-parameters),the concurrent optimization design method based on LAM should cover the process-performance relationship.This study proposes a novel artificial intelligence-facilitated TO method for LAM to concurrently design microscale material property and macroscale structural topology of 3D components by adopting heuristic and gradient-based algorithms.The process–structure–property relationship of selective laser sintering is established by the back propagation neural network,and it is integrated into the TO algorithm for providing a systematic design scheme of structural topology and process parameter.Compared with the classical optimization method,numerical examples show that this method is able to improve the mechanical performance of the macrostructure significantly.In addition,the collaborative design method is able to be widely applied for complex functional part design and optimization,as well as case studies on artificial intelligence-facilitated product evaluation.
基金Supported by the Scientific Research Foundation of Edu-cation Agency of Liaoning Province (20040088) and Scientific ResearchFoundation of Dalian Nationalities University (20046202)
文摘The correctness of workflow models is one of the major challenges in context of workflow analysis. The aim of this paper is to provide an improved Petri net-based reduction approach for verifying the correctness of workflow models. To the end, how to represent well-behaved building blocks and control structures of business processes by Petri nets is given at first, and then how to build well-structured process nets is presented. According to the structural characteristics of well-structured process nets, a set of legacy reduction rules are improved and extended, and then a complete Petri-net-based verification approach is proposed. The sound ness and the complexity with polynomial time for the improved re duction method are also proven.
基金financially supported by the National Natural Science Foundation of China(Nos.51227801,51325301)
文摘A biaxial stretching equipment was designed and constructed to enable fundamental studies of the relationship between film processing conditions and structures of oriented film products. With programmable drive motors and scissorlike mechanism, all stretching modes, including uniaxial stretching with constant and free width, simultaneous and sequential biaxial stretching, can be applied to a square-shaped sheet. Parameters related to film stretching manufacturing, such as temperature, draw ratio and stretching speed can be set independently to meet the requirement of different polymers. The force information during stretching is recorded by two miniature tension sensors in two directions independently, which can monitor the mechanical stimulus and stress response. Using this equipment, experiments are conducted to investigate the influence of stretching parameters on the structure of polypropylene films, which provides an effective method to tailor the processing conditions to obtain the films with desired properties.
基金Supported by the National Natural Science Foundation of China(61473026,61104131)the Fundamental Research Funds for the Central Universities(JD1413)
文摘Alarm flood is one of the main problems in the alarm systems of industrial process. Alarm root-cause analysis and alarm prioritization are good for alarm flood reduction. This paper proposes a systematic rationalization method for multivariate correlated alarms to realize the root cause analysis and alarm prioritization. An information fusion based interpretive structural model is constructed according to the data-driven partial correlation coefficient calculation and process knowledge modification. This hierarchical multi-layer model is helpful in abnormality propagation path identification and root-cause analysis. Revised Likert scale method is adopted to determine the alarm priority and reduce the blindness of alarm handling. As a case study, the Tennessee Eastman process is utilized to show the effectiveness and validity of proposed approach. Alarm system performance comparison shows that our rationalization methodology can reduce the alarm flood to some extent and improve the performance.
基金Jilin province education department"twelfth five-year"science and technology research plan project([2015]No.58)the science and technology innovation fund(No.XJJLG-2014-02)of Changchun University of Science and Technology
文摘In this paper, we study a class of ruin problems, in which premiums and claims are dependent. Under the assumption that premium income is a stochastic process, we raise the model that premiums and claims are dependent, give its numerical characteristics and the ruin probability of the individual risk model in the surplus process. In addition, we promote the number of insurance policies to a Poisson process with parameter λ, using martingale methods to obtain the upper bound of the ultimate ruin probability.
基金supported by the National Natural Science Foundation of China (No.50978014)the Fundamental Research Funds for the Central Universities (No.2011JBM077)
文摘A cake layer is formed by coagulation aggregates under certain transmembrane pressure in the coagulation-microfiltration （MF） process. The characteristics of humic acid aggregates coagulated by different iron-based coagulants, such as charge, size, fractal dimension and compressibility, have an effect on the cake layer structure. At the optimum iron dose of 0.6 to 0.8 mmol/L for ferric chloride （FC） and polymer ferric sulfate （PFS） pre-coagulation, at the point of charge neutralization for near zero zeta potential, the aggregate particles produced possess the greatest size and highest fractal dimension, which contributes to the cake layer being most loose with high porosity and low compressibility. Thus the membrane filterability is better. At a low or high iron dose of FC and PFS, a high negative or positive zeta potential with high charge repulsion results in so many small aggregate particles and low fractal dimension that the cake layer is compact with low porosity and high compressibility. Therefore the membrane fouling is accelerated and MF permeability becomes worse. The variation of cake layer structure as measured by scanning electric microscopy corresponds with the fact that the smaller the coagulation flocs size and fractal dimension are, the lower the porosity and the tighter the cake layer conformation. This also explains the MF membrane flux variation visually and accurately.
基金financially supported by the National Key Basic Research Program of China (No.2010CB226805)the National Natural Science Foundation of China (Nos.51474136 and 51474013)+1 种基金the Opening Project Fund of State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology (No.MDPC2013KF06)the Research Award Fund for the Excellent Youth of Shandong University of Science and Technology (No.2011KYJQ106)
文摘In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.
基金Supported by the National Natural Science Foundation of China（51079027）
文摘A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic responses. In order to reduce structural vibration, it is important to obtain the modal parameters information of a ship. However, the traditional modal parameter identification methods are not suitable since the excitation information is difficult to obtain. Natural excitation technique-eigensystem realization algorithm （NExT-ERA） is an operational modal identification method which abstracts modal parameters only from the response signals, and it is based on the assumption that the input to the structure is pure white noise. Hence, it is necessary to study the influence of harmonic excitations while applying the NExT-ERA method to a ship structure. The results of this research paper indicate the practical experiences under ambient excitation, ship model experiments were successfully done in the modal parameters identification only when the harmonic frequencies were not too close to the modal frequencies.
文摘Three dimensional models of shaft were completed on CATIA Part Design module with the Chinese national standard （GB） process structures such as chamfers, threads and tool withdrawal grooves, center holes, flat/woodruff/gib head taper keyseats, grinding undercuts, straight-sidedsplines, circlip slots and collars. The modeling steps are arranged in dialog menu interface by VB 6.0, the shaft creator, that permits users input geometric feature based parameters explicitly, and the standardized processdata are reorganized in Excel files that can be invoked correspondingly in the modeling procedure. It is aimed that this process may supply a simple way for shaft rapid modeling and comprehensive discipline for engineering students in their professional design activities.
基金Supported by the National High Technology Research and Development Program of China (863 Program) (2009AA012200)Henan Province Science and Technology Funding Projects ( SP09JH11158)
文摘Aiming at the problem that virtual machine information cannot be extracted incompletely, we extend the typical information extraction model of virtual machine and propose a perception mechanism in virtualization system based on storage covert channel to overcome the affection of the semantic gap. Taking advantage of undetectability of the covert channel, a secure channel is established between vip and virtual machine monitor to pass data directly. The vip machine can pass the control information of malicious process to virtual machine monitor by using the VMCALL instruction and shared memory. By parsing critical information in process control structure, virtual machine monitor can terminate the malicious processes. The test results show that the proposed mechanism can clear the user-level malicious programs in the virtual machine effectively and covertly. Meanwhile, its performance overhead is about the same as that of other mainstream monitoring mode.
基金the German Research Foundation (DFG)German Federation of Industrial Research Associations (AiF)the European Research Association for Sheet Metal Working (EFB)
文摘The global trends towards improving fuel efficiency and reducing CO;emissions are the key drivers for lightweight solutions. In sheet metal processing, this can be achieved by the use of materials with a supreme strength-toweight and stiffness-to-weight ratio. Besides monolithic materials such as high-strength or light metals, in particular metal–plastic composite sheets are able to provide outstanding mechanical properties. Thus, the adaption of conventional, wellestablished forming methods for the processing of hybrid sheet metals is a current challenge for the sheet metal working industry. In this work, the planning phase for a conventional sheet metal forming process is studied aiming at the forming of metal–plastic composite sheets. The single process steps like material characterization, FE analysis, tool design and development of robust process parameters are studied in detail and adapted to the specific properties of metal–plastic composites. In material characterization, the model of the hybrid laminate needs to represent not only the mechanical properties of the individual combined materials, but also needs to reflect the behaviour of the interface zone between them.Based on experience, there is a strong dependency on temperature as well as strain rate. While monolithic materials show a moderate anisotropic behaviour, loads on laminates in different directions generate different strain states and completely different failure modes. During the FE analysis, thermo-mechanic and thermo-dynamic effects influence the temperature distribution within tool and work pieces and subsequently the forming behaviour. During try out and production phase,those additional influencing factors are limiting the process window even more and therefore need to be considered for the design of a robust forming process. A roadmap for sheet metal forming adjusted to metal–plastic composites is presented in this paper.
文摘In this article,the phenomenon of“information space”and its methods of study,its types,elementary structure and qualitative characteristics are discussed,the author’s definition of the concept of“information”is given,the structure of the information process,and the phases,which are the basis for the evolution of the information space and the universe of human activity,are considered.
文摘By means of scanning electron microscope(SEM)and high voltage electron microscope(HVEM)we have observed and analysed morphology and micro-structure of silicon oxide film with different thickness formed on(111)silicon monocrystal under dry oxygen atmosphere at 1100℃.Compared with their oxidation kinetic curves consisted of three stages,we suggested a mechanism on forming silicon oxide film.According to electron and X-ray diffraction analyses the silicon oxide films consisted of silica with different crystal structure.We also have discussed a stacking fault and a dislocation formed in the Si-Sio_2 interface region simulaneously forming silicon oxide film.
基金Item Sponsored by National Natural Science Foundation of China(51131002,51301196)Fundamental Research Funds for the Central Universities of China(YWF-15-CLXY-002)Fok Ying Tong Education Foundation of China(142008)
文摘The surface of Ni_（61）Nb_（39） crystalline ingot was treated by laser surface melting with different processing parameters.A fully amorphous layer with a thickness of approximately 10μm could be produced on the top surface under optimal parameters.An amorphous-crystalline composite layer with the depth from 10 to 50μm,consisting of amorphous matrix and intermetallic phases of Ni_3 Nb and Ni_6Nb_7,could be formed.The micro-hardness（about 831HV）of the treated surface was remarkably improved by nearly 100% compared with the value of the crystalline substrate caused by the formation of the fully amorphous structure.A finite volume simulation was adopted to evaluate the temperature distribution in the laser-affected zone of Ni_（61）Nb_（39） alloys and to reveal the mechanism of glass formation in the laser-affected zone.
