In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, an...In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, and a new method of eight specific steps is proposed to establish object oriented system structure of DSS by using the method of O S chart, which is applied successfully to the development of the DSS for the energy system ecology engineering research of the Wangheqiu country. Supplying many scientific effective computing models, decision support ways and a lot of accurate reliable decision data, the DSS plays a critical part in helping engineering researchers to make correct decisions. Because the period for developing the DSS is relatively shorter, the new way improves the efficiency of establishing DSS greatly. It also makes the DSS of system structure more flexible and easy to expand.展开更多
This work proposes a novel design for a narrowband filter operating in the mid-wave infrared(MWIR)spectrum.The filter is designed with a single layer of slab waveguide decorated with a layer of gold grating arrays.Thi...This work proposes a novel design for a narrowband filter operating in the mid-wave infrared(MWIR)spectrum.The filter is designed with a single layer of slab waveguide decorated with a layer of gold grating arrays.This design demonstrates superior narrowband transmission properties within the MWIR range,which can be explained in the framework of guided-mode resonance(GMR).Since MWIR spectral data is crucial for identifying the chemical fingerprint of man-made objects and natural materials,the GMR filters hold great potential in integration with commercial MWIR photodetectors and focal plane arrays(FPAs)and addressing the market’s demand for ultra-compact spectral detection solutions.Theoretical studies have investigated the influential parameters in the GMR filter design and provided the methods towards optimal filtering performance.The center wavelength of these transmission filters exhibits significant tunability,spanning from 3μm to 5μm across the MWIR spectrum,while the full width at half maximum(FWHM)exhibits remarkable variability,ranging from 5.7 nm to 101.0 nm,enabling the attainment of desired filter performance contingent upon judicious waveguide material selection and optimized structural design.This work forges a path toward integrating multifunctional capabilities into ultra-compact MWIR sensors.展开更多
Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In orde...Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.展开更多
Molecular management is a promising technology to face challenges in the refining industry, such as more stringent requirements for product oil and heavier crude oil, and to maximize the value of every molecule in pet...Molecular management is a promising technology to face challenges in the refining industry, such as more stringent requirements for product oil and heavier crude oil, and to maximize the value of every molecule in petroleum fractions. To achieve molecular management in refining processes, a novel model that is based on structure oriented lumping(SOL) and group contribution(GC) methods was proposed in this study. SOL method was applied to describe a petroleum fraction with structural increments, and GC method aimed to estimate molecular properties. The latter was achieved by associating rules between SOL structural increments and GC structures. A three-step reconstruction algorithm was developed to build a representative set of molecules from partial analytical data. First, structural distribution parameters were optimized with several properties. Then, a molecular library was created by using the optimized parameters. In the final step, maximum information entropy(MIE) method was applied to obtain a molecular fraction. Two industrial samples were used to validate the method, and the simulation results of the feedstock properties agreed well with the experimental data.展开更多
The preparation of the poly（3-hexylthiophene） （P3HT） stripe structure with oriented nanofibrils prepared by controlled inclining evaporative technique is reported. The distance of the adjacent stripes could be con...The preparation of the poly（3-hexylthiophene） （P3HT） stripe structure with oriented nanofibrils prepared by controlled inclining evaporative technique is reported. The distance of the adjacent stripes could be controlled from 40 μm to 100 μm by decreasing the inclining angle. The oriented nanofibrils in the stripes can be obtained because the P3HT lamellae diffuse directionally and form 1D crystals at the three-phase contact line of the drop. In order to get the oriented P3HT stripes, the proper solvent evaporation rate which is controlled by the inclining angle and the wettability of the substrate must be carefully chosen to match the P3HT 1D crystallization rate. It is found that large inclining angle and the hydrophilic substrate （for example： glass and PEDOT） are beneficial to get P3HT stripe structure with oriented nanofibrils.展开更多
Manipulation of the internal architecture is essential for electromagnetic interference(EMI)shielding performance of metal-based coatings,which can address the electromagnetic pollution in large-size,complex geometrie...Manipulation of the internal architecture is essential for electromagnetic interference(EMI)shielding performance of metal-based coatings,which can address the electromagnetic pollution in large-size,complex geometries,and harsh environments.In this work,oriented segregated structure with conductive networks embedded in magnetic matrix was achieved in Fe-based amorphous coatings via Ni-Cu-P functionalization of(Fe_(0.76)Si_(0.09)B_(0.1)P_(0.05))_(99)Nb_(1)amorphous powder precursors and then thermal spraying them onto aluminum(Al)substrate.Benefiting from the unique magnetic-electric structure,the coating@Al composite delivered prominent EMI shielding performance.The EMI shielding effectiveness(SE)of modified coating@Al composite is~41 dB at 8-12 GHz,doubling the value of Al substrate and is 15 dB greater than that of Ni-Cu-P-free coating@Al composite.Microstructure analysis showed that the introduced Ni−Cu−P insertions forcefully suppress the serious oxidation of the magnetic precursors during thermal spraying and form a dense conductive network in the magnetic matrix.Electron holography observation and electromagnetism simulation clarified that the modified coating can effectively trap and attenuate the incident radiations because of the electric loss from Ni−Cu−P conductive network,magnetic loss from Fe-based amorphous coating,and the electromagnetic interactions in the oriented segregated architectures.Moreover,the optimized thermal isolation and mechanical properties brought by structural improvement enable the coating to shield complex parts in thermal shock and mechanical loading environments.Our work gives an insight on the design strategies for metal-based EMI shielding materials and enriches the fundamental understanding of EMI shielding mechanisms.展开更多
Effects of Sn and Sb on the structure and magnetic properties of high induction oriented silicon steel have been investigated.The heats with Sn or Sb possess rather fine primary and secondary gram sizes.Sn or Sb promo...Effects of Sn and Sb on the structure and magnetic properties of high induction oriented silicon steel have been investigated.The heats with Sn or Sb possess rather fine primary and secondary gram sizes.Sn or Sb promotes the finer AlN particles,increases the amount of pre- cipitated AlN after normalizing and strengthens the ability of inhibition.After decarburizing annealing,the texture components of{110}〈115〉and〈110〉〈001〉tend to increase and form more secondary grain nuclei.展开更多
When Kalman filter is used in the estimation of Vasicek term structure of interest rates,it is usual to assume that the measurement noise is uncorrelated.Study results are more favorable to the assumption of correlate...When Kalman filter is used in the estimation of Vasicek term structure of interest rates,it is usual to assume that the measurement noise is uncorrelated.Study results are more favorable to the assumption of correlated measurement noise.An augmented state Kalman filter form for Vasicek model is proposed to optimally estimate the unobservable state variable with the assumption of correlated measurement noise.Empirical results indicate that the model with sequentially correlated measurement noise can more accurately describe the dynamics of the term structure of interest rates.展开更多
AlN films with preferred c-axis orientation are deposited on Si substrates using the radio frequency(RF) magnetron sputtering method.The post-processing is carried out under the cooling conditions including high vacuu...AlN films with preferred c-axis orientation are deposited on Si substrates using the radio frequency(RF) magnetron sputtering method.The post-processing is carried out under the cooling conditions including high vacuum,low vacuum under deposition gas ambient and low vacuum under dynamic N2 ambient.Structures and morphologies of the films are analyzed by X-ray diffraction(XRD) and atomic force microscopy(AFM).The hardness and Young's modulus are investigated by the nanoindenter.The experimental results indicate that the(100) and(110) peak intensities decrease in the XRD spectra and the root-mean-square of roughness(Rrms) of the film decreases gradually with the increase of the cooling rate.The maximum values of the hardness and Young modulus are obtained by cooling in low vacuum under deposition gas ambient.The reason for orientation variation of the films is explained from the perspective of the Al-N bond formation.展开更多
There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote...There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote successful fabrication of small-diameter artificial blood vessels.From a physical perspective,the internal oriented structures of natural blood vessels plays an important role in guiding the directional growth of cells,improving the blood flow environment,and promoting the regeneration of vascular tissue.In this review,the effects of the oriented structures on cells,including endothelial cells(ECs),smooth muscle cells(SMCs)and stem cells,as well as the effect of the oriented structures on hemodynamics and vascular tissue remodeling and regeneration are introduced.Various forms of oriented structures(fibers,grooves,channels,etc.)and their construction methods are also reviewed.Conclusions and future perspectives are given.It is expected to give some references to relevant researches.展开更多
A facile approach to construct ferroferric oxide/chitosan composite scaffolds with three-dimensional oriented structure has been explored in this research. Chitosan and ferroferric oxide are co-precipitated by using a...A facile approach to construct ferroferric oxide/chitosan composite scaffolds with three-dimensional oriented structure has been explored in this research. Chitosan and ferroferric oxide are co-precipitated by using an in situ precipitation method, and then lyophilized to get the composite scaffolds. XRD indicated that Fe304 was generated during the gel formation process, and increasing the content of magnetic particles could destruct the crystal structure of chitosan. When the content of magnetic particles is lower than 10%, the layer-by-layer structure and wheel spoke structure are coexisting in the scaffolds. Increasing the content of magnetic particles, just layer-by-layer structure could be observed in the scaffolds. Ferroferric oxide particles were uniformly distributed in the matrix, the size of which was about 0.48 gm in diameter, 2 gm in length. Porosity of magnetic chitosan composite scaffolds is about 90%. When the ratio of ferroferric oxide to chitosan is 5/100, the compressive strength of the material is 0.4367 MPa, which is much higher than that of pure chitosan scaffolds, indicating that the layer-by-layer and wheel spokes complex structure is beneficial for the improvement of the mechanical properties of chitosan scaffolds. However, increasing the content of ferroferric oxide, the compressive strength of scaffolds decreased, because of the decreasing of chitosan crystallization and aggregation of magnetic particles as stress centralized body. Another reason is that the layer-by-layer and wheel spokes complex structure makes bigger contributions for the compressive strength than the layer-by-layer structure does. Three-dimensional ferroferric oxide/chitosan scaffolds could be used as hyperthermia generator system, improving the local circulation of blood, promoting the aggradation of calcium salt and stimulating bone tissue regeneration.展开更多
SrBi4Ti4O15 powder was synthesized by conventional solid state synthesis （ CS ） and molten salt synthesis （ MSS ） . MSS method can synthesize plate-like SrBi4Ti4O15 at lower temperature （900℃） than CS method. P...SrBi4Ti4O15 powder was synthesized by conventional solid state synthesis （ CS ） and molten salt synthesis （ MSS ） . MSS method can synthesize plate-like SrBi4Ti4O15 at lower temperature （900℃） than CS method. Plate-like form becomes more distinct when the synthesis temperature increases. This would help cause the grain orientation of the ceramics after sintering. The sintered samples of MSS had grain orientation at （0,0, 10） plane. The degree of （0,0,10） grain orientation F was 62.1% . Hot pressing made （0,0,10） grain orientation more distinct （ F = 85.7% ）. The microstructures of the sintered samples were detected by SEM. Due to the grain orientation the density of samples fabricated by MSS was lower than that of prepared by CS.展开更多
Since unmanned ground vehicles often encounter concave and convex obstacles in wild ground, a filtering algorithm using line structured light to detect these long distance obstacles is proposed. For the line structure...Since unmanned ground vehicles often encounter concave and convex obstacles in wild ground, a filtering algorithm using line structured light to detect these long distance obstacles is proposed. For the line structured light image, a ranked-order based adaptively extremum median （RAEM） filter algorithm on salt and pepper noise is presented. In the algorithm, firstly effective points and noise points in a filtering window are differentiated; then the gray values of noise points are replaced by the medium of gray values of the effective pixels, with the efficient points＇ gray values unchanged; in the end this algorithm is proved to be efficient by experiments. Experimental resuits demonstrate that the image blur, resulting into proposed algorithm can remove noise points effectively and minimize the protecting the edge information as much as possible.展开更多
Product information model for welding structure plays an important role for the integration of welding CAD/CAPP/CAM. However, existing CAD modeling systems are not capable of providing enough information for subsequen...Product information model for welding structure plays an important role for the integration of welding CAD/CAPP/CAM. However, existing CAD modeling systems are not capable of providing enough information for subsequent manufacturing activities such as CAPP and CAM. A new design approach using feature technique and object oriented programming method is put forward in this paper in order to create the product information model of welding structure. With this approach, the product information model is able to effectively support computer aided welding process planning, fixturing, assembling, path planning of welding robot and other manufacturing activities. The feature classification and representing scheme of welding structure are discussed. A prototype system is developed based on feature and object oriented programming. Its structure and functions are given in detail.展开更多
A group oriented cryptosystem for the vector space access structure was proposed. This cryptosystem adopts self-certified public keys. It allows the participants of an authorized subset to cooperatively access an encr...A group oriented cryptosystem for the vector space access structure was proposed. This cryptosystem adopts self-certified public keys. It allows the participants of an authorized subset to cooperatively access an encrypted message. All data delivered in the cryptosystem are public. Therefore it does not need a partial decrypting results combiner and any secure communication channel. The security of the group oriented cryptosystem is based on the intractability of the discrete log problem and difficulty of factoring large integers. The suspected attacks can not break it.展开更多
Two adaptive friction compensation schemes are developed for a high precision turntable system with nonlinear dynamic friction to handle two types of parametric uncertainties in the friction. Both schemes utilize a no...Two adaptive friction compensation schemes are developed for a high precision turntable system with nonlinear dynamic friction to handle two types of parametric uncertainties in the friction. Both schemes utilize a nonlinear observer/filter structure to compensate for uncertainties in corresponding friction parameters associated with the turntable system. Moreover, in the second scheme, adjustable gains are introduced into the dual nonlin- ear filters and they can be tuned to improve the position tracking performance. In both cases, a Lyapunov-like argument is provided for the global asymptotic stability of the closed-loop system. Simulation results demonstrate the effectiveness of the proposed schemes.展开更多
"Data Structure and Algorithm",which is an important major subject in computer science,has a lot of problems in teaching activity.This paper introduces and analyzes the situation and problems in this course ..."Data Structure and Algorithm",which is an important major subject in computer science,has a lot of problems in teaching activity.This paper introduces and analyzes the situation and problems in this course study.A "programming factory" method is then brought out which is indeed a practice-oriented platform of the teachingstudy process.Good results are obtained by this creative method.展开更多
An all-digital hybrid current regulation scheme for the single-phase shunt active power filter （APF） is presented. The proposed hybrid current control scheme integrates the deadbeat control and the dual-mode structu...An all-digital hybrid current regulation scheme for the single-phase shunt active power filter （APF） is presented. The proposed hybrid current control scheme integrates the deadbeat control and the dual-mode structure repetitive control （DMRC） so that it can offer superior steady-state performance and good transient features. Unlike the conventional schemes, the proposed scheme-based APF can compensate both the odd and the even order harmonics in grid. The detailed design criteria and the stability analysis of the proposed hybrid current controller are presented. Moreover, an improved structure which incorporates the proposed hybrid controller and the resonant controller for tracking specific order harmonics is given. The relationships between the resonant controller and different repetitive control schemes are discussed. Experimental results verify the effectiveness and advantages of the proposed hybrid control scheme.展开更多
Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid ...Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid fatty acid （PLFA） composition. A total of 20 fatty acids in the range of C18to C20 were determined but only 13 PLFAs were detected in steel slag. They consist of saturated fatty acids, branched fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The variation of fatty acids was revealed in the relative proportions of these fatty acids in different media. The aerobic prokaryotes were the predominant group in all media. The PLFA composition showed significant differences among the eight different media by Tukey＇s honestly test. It was found that steel slag was significantly different in the microbial community as compared to other filter media, probably due to its alkaline effluent. Steel slag alone is probably not a good choice of substratum in constructed wetlands. The principle components analysis （PCA） showed that zeolites, bio-ceramic, shale and vermiculite had a similar microbial community structure while steel slag and ceramic filter media were distinct from other media.展开更多
Piezoelectric sensor array-based spatial filter technology is a new promising method presented in research area of structural health monitoring （SHM） in the recent years. To apply this method to composite structures...Piezoelectric sensor array-based spatial filter technology is a new promising method presented in research area of structural health monitoring （SHM） in the recent years. To apply this method to composite structures and give the actual position of damage, this paper proposes a spatial filter-based damage imaging method improved by complex Shannon wavelet transform. The basic principle of spatial filter is analyzed first. Then, this paper proposes a method of using complex Shannon wavelet transform to construct analytic signals of time domain signals of PZT sensors array. The analytic signals are synthesized depending on the principle of the spatial filter to give a damage imaging in the form of angle-time. A method of converting the damage imaging to the form of angle-distance is discussed. Finally, an aircraft composite oil tank is adopted to validate the damage imaging method. The validating results show that this method can recognize angle and distance of damage successfully.展开更多
文摘In order to solve existing problems about the method of establishing traditional system structure of decision support system(DSS), O S chart is applied to describe object oriented system structure of general DSS, and a new method of eight specific steps is proposed to establish object oriented system structure of DSS by using the method of O S chart, which is applied successfully to the development of the DSS for the energy system ecology engineering research of the Wangheqiu country. Supplying many scientific effective computing models, decision support ways and a lot of accurate reliable decision data, the DSS plays a critical part in helping engineering researchers to make correct decisions. Because the period for developing the DSS is relatively shorter, the new way improves the efficiency of establishing DSS greatly. It also makes the DSS of system structure more flexible and easy to expand.
基金supported by the National Key Research and Development Program of China under Grant No.2019YFB2203400the National Natural Science Foundation of China under Grant No.61974014.
文摘This work proposes a novel design for a narrowband filter operating in the mid-wave infrared(MWIR)spectrum.The filter is designed with a single layer of slab waveguide decorated with a layer of gold grating arrays.This design demonstrates superior narrowband transmission properties within the MWIR range,which can be explained in the framework of guided-mode resonance(GMR).Since MWIR spectral data is crucial for identifying the chemical fingerprint of man-made objects and natural materials,the GMR filters hold great potential in integration with commercial MWIR photodetectors and focal plane arrays(FPAs)and addressing the market’s demand for ultra-compact spectral detection solutions.Theoretical studies have investigated the influential parameters in the GMR filter design and provided the methods towards optimal filtering performance.The center wavelength of these transmission filters exhibits significant tunability,spanning from 3μm to 5μm across the MWIR spectrum,while the full width at half maximum(FWHM)exhibits remarkable variability,ranging from 5.7 nm to 101.0 nm,enabling the attainment of desired filter performance contingent upon judicious waveguide material selection and optimized structural design.This work forges a path toward integrating multifunctional capabilities into ultra-compact MWIR sensors.
基金the Shaanxi Provincial Key Research and Development Program(No.2020GY-040)。
文摘Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.
基金Supported by the National Natural Science Foundation of China(U1462206)
文摘Molecular management is a promising technology to face challenges in the refining industry, such as more stringent requirements for product oil and heavier crude oil, and to maximize the value of every molecule in petroleum fractions. To achieve molecular management in refining processes, a novel model that is based on structure oriented lumping(SOL) and group contribution(GC) methods was proposed in this study. SOL method was applied to describe a petroleum fraction with structural increments, and GC method aimed to estimate molecular properties. The latter was achieved by associating rules between SOL structural increments and GC structures. A three-step reconstruction algorithm was developed to build a representative set of molecules from partial analytical data. First, structural distribution parameters were optimized with several properties. Then, a molecular library was created by using the optimized parameters. In the final step, maximum information entropy(MIE) method was applied to obtain a molecular fraction. Two industrial samples were used to validate the method, and the simulation results of the feedstock properties agreed well with the experimental data.
基金supported by the National Natural Science Foundation of China (Nos. 20921061, 20834005 and 51073151)the Ministry of Science and Technology of China (No. 2009CB930603)
文摘The preparation of the poly（3-hexylthiophene） （P3HT） stripe structure with oriented nanofibrils prepared by controlled inclining evaporative technique is reported. The distance of the adjacent stripes could be controlled from 40 μm to 100 μm by decreasing the inclining angle. The oriented nanofibrils in the stripes can be obtained because the P3HT lamellae diffuse directionally and form 1D crystals at the three-phase contact line of the drop. In order to get the oriented P3HT stripes, the proper solvent evaporation rate which is controlled by the inclining angle and the wettability of the substrate must be carefully chosen to match the P3HT 1D crystallization rate. It is found that large inclining angle and the hydrophilic substrate （for example： glass and PEDOT） are beneficial to get P3HT stripe structure with oriented nanofibrils.
基金supported by National Key Research and Development Program of China(No.2016YFB0300500)National Natural Science Foundation of China(No.51771215)+1 种基金Ningbo Major Special Projects of the Plan“Science and Technology Innovation 2025(No.2018B10084)China Postdoctoral Science Foundation(No.2020M673174)。
文摘Manipulation of the internal architecture is essential for electromagnetic interference(EMI)shielding performance of metal-based coatings,which can address the electromagnetic pollution in large-size,complex geometries,and harsh environments.In this work,oriented segregated structure with conductive networks embedded in magnetic matrix was achieved in Fe-based amorphous coatings via Ni-Cu-P functionalization of(Fe_(0.76)Si_(0.09)B_(0.1)P_(0.05))_(99)Nb_(1)amorphous powder precursors and then thermal spraying them onto aluminum(Al)substrate.Benefiting from the unique magnetic-electric structure,the coating@Al composite delivered prominent EMI shielding performance.The EMI shielding effectiveness(SE)of modified coating@Al composite is~41 dB at 8-12 GHz,doubling the value of Al substrate and is 15 dB greater than that of Ni-Cu-P-free coating@Al composite.Microstructure analysis showed that the introduced Ni−Cu−P insertions forcefully suppress the serious oxidation of the magnetic precursors during thermal spraying and form a dense conductive network in the magnetic matrix.Electron holography observation and electromagnetism simulation clarified that the modified coating can effectively trap and attenuate the incident radiations because of the electric loss from Ni−Cu−P conductive network,magnetic loss from Fe-based amorphous coating,and the electromagnetic interactions in the oriented segregated architectures.Moreover,the optimized thermal isolation and mechanical properties brought by structural improvement enable the coating to shield complex parts in thermal shock and mechanical loading environments.Our work gives an insight on the design strategies for metal-based EMI shielding materials and enriches the fundamental understanding of EMI shielding mechanisms.
文摘Effects of Sn and Sb on the structure and magnetic properties of high induction oriented silicon steel have been investigated.The heats with Sn or Sb possess rather fine primary and secondary gram sizes.Sn or Sb promotes the finer AlN particles,increases the amount of pre- cipitated AlN after normalizing and strengthens the ability of inhibition.After decarburizing annealing,the texture components of{110}〈115〉and〈110〉〈001〉tend to increase and form more secondary grain nuclei.
文摘When Kalman filter is used in the estimation of Vasicek term structure of interest rates,it is usual to assume that the measurement noise is uncorrelated.Study results are more favorable to the assumption of correlated measurement noise.An augmented state Kalman filter form for Vasicek model is proposed to optimally estimate the unobservable state variable with the assumption of correlated measurement noise.Empirical results indicate that the model with sequentially correlated measurement noise can more accurately describe the dynamics of the term structure of interest rates.
基金supported by the National Natural Science Foundation of China (No.50972105)Tianjin Natural Science Foundation (Nos.09JCZDJC16500,08JCZDJC22700 and 10SYSYJC27700)
文摘AlN films with preferred c-axis orientation are deposited on Si substrates using the radio frequency(RF) magnetron sputtering method.The post-processing is carried out under the cooling conditions including high vacuum,low vacuum under deposition gas ambient and low vacuum under dynamic N2 ambient.Structures and morphologies of the films are analyzed by X-ray diffraction(XRD) and atomic force microscopy(AFM).The hardness and Young's modulus are investigated by the nanoindenter.The experimental results indicate that the(100) and(110) peak intensities decrease in the XRD spectra and the root-mean-square of roughness(Rrms) of the film decreases gradually with the increase of the cooling rate.The maximum values of the hardness and Young modulus are obtained by cooling in low vacuum under deposition gas ambient.The reason for orientation variation of the films is explained from the perspective of the Al-N bond formation.
文摘There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote successful fabrication of small-diameter artificial blood vessels.From a physical perspective,the internal oriented structures of natural blood vessels plays an important role in guiding the directional growth of cells,improving the blood flow environment,and promoting the regeneration of vascular tissue.In this review,the effects of the oriented structures on cells,including endothelial cells(ECs),smooth muscle cells(SMCs)and stem cells,as well as the effect of the oriented structures on hemodynamics and vascular tissue remodeling and regeneration are introduced.Various forms of oriented structures(fibers,grooves,channels,etc.)and their construction methods are also reviewed.Conclusions and future perspectives are given.It is expected to give some references to relevant researches.
基金financially supported by the National Natural Science Foundation of China(Nos.21104067 and 50773070)China Postdoctoral Science Foundation(No.20100480085)+1 种基金Key Basic Research Development Plan(973) of China (No.2009CB930104)Grand Science and Technology Special Project of Zhejiang Province(No.2008C11087)
文摘A facile approach to construct ferroferric oxide/chitosan composite scaffolds with three-dimensional oriented structure has been explored in this research. Chitosan and ferroferric oxide are co-precipitated by using an in situ precipitation method, and then lyophilized to get the composite scaffolds. XRD indicated that Fe304 was generated during the gel formation process, and increasing the content of magnetic particles could destruct the crystal structure of chitosan. When the content of magnetic particles is lower than 10%, the layer-by-layer structure and wheel spoke structure are coexisting in the scaffolds. Increasing the content of magnetic particles, just layer-by-layer structure could be observed in the scaffolds. Ferroferric oxide particles were uniformly distributed in the matrix, the size of which was about 0.48 gm in diameter, 2 gm in length. Porosity of magnetic chitosan composite scaffolds is about 90%. When the ratio of ferroferric oxide to chitosan is 5/100, the compressive strength of the material is 0.4367 MPa, which is much higher than that of pure chitosan scaffolds, indicating that the layer-by-layer and wheel spokes complex structure is beneficial for the improvement of the mechanical properties of chitosan scaffolds. However, increasing the content of ferroferric oxide, the compressive strength of scaffolds decreased, because of the decreasing of chitosan crystallization and aggregation of magnetic particles as stress centralized body. Another reason is that the layer-by-layer and wheel spokes complex structure makes bigger contributions for the compressive strength than the layer-by-layer structure does. Three-dimensional ferroferric oxide/chitosan scaffolds could be used as hyperthermia generator system, improving the local circulation of blood, promoting the aggradation of calcium salt and stimulating bone tissue regeneration.
文摘SrBi4Ti4O15 powder was synthesized by conventional solid state synthesis （ CS ） and molten salt synthesis （ MSS ） . MSS method can synthesize plate-like SrBi4Ti4O15 at lower temperature （900℃） than CS method. Plate-like form becomes more distinct when the synthesis temperature increases. This would help cause the grain orientation of the ceramics after sintering. The sintered samples of MSS had grain orientation at （0,0, 10） plane. The degree of （0,0,10） grain orientation F was 62.1% . Hot pressing made （0,0,10） grain orientation more distinct （ F = 85.7% ）. The microstructures of the sintered samples were detected by SEM. Due to the grain orientation the density of samples fabricated by MSS was lower than that of prepared by CS.
基金Supported by the National Natural Science Foundation of China(61273346)the National Defense Key Fundamental Research Program of China(A20130010)the Program for the Fundamental Research of Beijing Institute of Technology(2016CX02010)
文摘Since unmanned ground vehicles often encounter concave and convex obstacles in wild ground, a filtering algorithm using line structured light to detect these long distance obstacles is proposed. For the line structured light image, a ranked-order based adaptively extremum median （RAEM） filter algorithm on salt and pepper noise is presented. In the algorithm, firstly effective points and noise points in a filtering window are differentiated; then the gray values of noise points are replaced by the medium of gray values of the effective pixels, with the efficient points＇ gray values unchanged; in the end this algorithm is proved to be efficient by experiments. Experimental resuits demonstrate that the image blur, resulting into proposed algorithm can remove noise points effectively and minimize the protecting the edge information as much as possible.
文摘Product information model for welding structure plays an important role for the integration of welding CAD/CAPP/CAM. However, existing CAD modeling systems are not capable of providing enough information for subsequent manufacturing activities such as CAPP and CAM. A new design approach using feature technique and object oriented programming method is put forward in this paper in order to create the product information model of welding structure. With this approach, the product information model is able to effectively support computer aided welding process planning, fixturing, assembling, path planning of welding robot and other manufacturing activities. The feature classification and representing scheme of welding structure are discussed. A prototype system is developed based on feature and object oriented programming. Its structure and functions are given in detail.
文摘A group oriented cryptosystem for the vector space access structure was proposed. This cryptosystem adopts self-certified public keys. It allows the participants of an authorized subset to cooperatively access an encrypted message. All data delivered in the cryptosystem are public. Therefore it does not need a partial decrypting results combiner and any secure communication channel. The security of the group oriented cryptosystem is based on the intractability of the discrete log problem and difficulty of factoring large integers. The suspected attacks can not break it.
文摘Two adaptive friction compensation schemes are developed for a high precision turntable system with nonlinear dynamic friction to handle two types of parametric uncertainties in the friction. Both schemes utilize a nonlinear observer/filter structure to compensate for uncertainties in corresponding friction parameters associated with the turntable system. Moreover, in the second scheme, adjustable gains are introduced into the dual nonlin- ear filters and they can be tuned to improve the position tracking performance. In both cases, a Lyapunov-like argument is provided for the global asymptotic stability of the closed-loop system. Simulation results demonstrate the effectiveness of the proposed schemes.
基金supported by NSF B55101680,NTIF B2090571,B2110140,SCUT x2rjD2116860,Y1080170,Y1090160,Y1100030,Y1100050,Y1110020 and S1010561121,G101056137
文摘"Data Structure and Algorithm",which is an important major subject in computer science,has a lot of problems in teaching activity.This paper introduces and analyzes the situation and problems in this course study.A "programming factory" method is then brought out which is indeed a practice-oriented platform of the teachingstudy process.Good results are obtained by this creative method.
基金The National Basic Research Program of China(973 Program)(No.2013CB035603)the National Natural Science Foundation of China(No.51007008,51137001)+1 种基金the Ph.D.Programs Foundation of Ministry of Education of China(No.20100092120043)the Fundamental Research Funds for the Central Universities
文摘An all-digital hybrid current regulation scheme for the single-phase shunt active power filter （APF） is presented. The proposed hybrid current control scheme integrates the deadbeat control and the dual-mode structure repetitive control （DMRC） so that it can offer superior steady-state performance and good transient features. Unlike the conventional schemes, the proposed scheme-based APF can compensate both the odd and the even order harmonics in grid. The detailed design criteria and the stability analysis of the proposed hybrid current controller are presented. Moreover, an improved structure which incorporates the proposed hybrid controller and the resonant controller for tracking specific order harmonics is given. The relationships between the resonant controller and different repetitive control schemes are discussed. Experimental results verify the effectiveness and advantages of the proposed hybrid control scheme.
基金supported by the National Natural Science Foundation of China (No.30870221,20877093,50808172)the High Technology Research and Development Program (863) of China (No.2009X207209-004)
文摘Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid fatty acid （PLFA） composition. A total of 20 fatty acids in the range of C18to C20 were determined but only 13 PLFAs were detected in steel slag. They consist of saturated fatty acids, branched fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The variation of fatty acids was revealed in the relative proportions of these fatty acids in different media. The aerobic prokaryotes were the predominant group in all media. The PLFA composition showed significant differences among the eight different media by Tukey＇s honestly test. It was found that steel slag was significantly different in the microbial community as compared to other filter media, probably due to its alkaline effluent. Steel slag alone is probably not a good choice of substratum in constructed wetlands. The principle components analysis （PCA） showed that zeolites, bio-ceramic, shale and vermiculite had a similar microbial community structure while steel slag and ceramic filter media were distinct from other media.
基金National Natural Science Foundation of China (50830201,10872217)Aeronautical Science Foundation of China (20090952015)+1 种基金Specialized Research Fund for the Doctoral Program of Higher Education(20103218110005)National Science Foundation of the General Program of Jiangsu Higher Education Institutions (09KJD520005)
文摘Piezoelectric sensor array-based spatial filter technology is a new promising method presented in research area of structural health monitoring （SHM） in the recent years. To apply this method to composite structures and give the actual position of damage, this paper proposes a spatial filter-based damage imaging method improved by complex Shannon wavelet transform. The basic principle of spatial filter is analyzed first. Then, this paper proposes a method of using complex Shannon wavelet transform to construct analytic signals of time domain signals of PZT sensors array. The analytic signals are synthesized depending on the principle of the spatial filter to give a damage imaging in the form of angle-time. A method of converting the damage imaging to the form of angle-distance is discussed. Finally, an aircraft composite oil tank is adopted to validate the damage imaging method. The validating results show that this method can recognize angle and distance of damage successfully.
