Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'...Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.展开更多
The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solutio...The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.展开更多
Heavy metal contamination of soil is one of the major challenges to sustainable agriculture.This contamination can be transmitted through the soil food chain and poses a serious threat to human health.In this study,we...Heavy metal contamination of soil is one of the major challenges to sustainable agriculture.This contamination can be transmitted through the soil food chain and poses a serious threat to human health.In this study,we found that freeze-thaw leaching(FTL)effectively complements the low removal rate of chemical leaching,and investigated the effects of different numbers of FTL on Cd contamination,soil chemical properties and microbial communities.The results showed that repeated FTL significantly reduced(P<0.05)the total Cd content in the top soil(19.02%-49.35%)and subsoil(0.41%-21.13%)and promoted the transformation of Cd to a more stable form,mainly through various removal mechanisms such as complexation,ion-exchange,and chemical precipitation.This finding was supported by reductions in several soil properties,including pH,available potassium(AK),and available phosphorus(AP).FTL treatment initially increased the bioavailability of Cd compared to chemical leaching,but bioavailability of Cd progressively decreased as the number of freeze-thaw cycles increased.Additionally,FTL reduced the richness and diversity of bacteria communities,destabilized ecological symbiotic networks,while increasing the richness and diversity of fungi in the soil.Various model analyses indicated that FTL treatment,available Cd,soil pH,AP and AK were the key drivers influencing the changes in microbial community structure.This study provides new insights and scientific bases for the effective management of heavy metal pollution in agricultural soils,the restoration of ecosystem health,and the improvement of soil sustainability.展开更多
The effect of element Ti on the microstructures and mechanical properties of as-cast and annealed NbTaMoWTi,(x=0,1,1.5,2)refractory high-entropy alloys(RHEAs)was investigated.Results show that after Ti addition,the as...The effect of element Ti on the microstructures and mechanical properties of as-cast and annealed NbTaMoWTi,(x=0,1,1.5,2)refractory high-entropy alloys(RHEAs)was investigated.Results show that after Ti addition,the as-cast alloys maintain their original single body-centered cubic(bcc)structure.As for the mechanical properties,compared with those without Ti addition,the strength and ductility of NbTaMoWTi,alloys increase by 93%and 215%,respectively.Furthermore,the NbTaMoWTi alloys exhibit outstanding thermal stability.After annealing at 1400 C,they still maintain the single bcc structure,and their mechanical properties are even slightly improved.However,annealing leads to a significant deterioration in the mechanical properties of high-Ti-content alloys(NbTaMoWTil and NbTaMoWTi2),owing to the formation of Ti-rich acicular phases.展开更多
The effects of channel segregation on the macro-and micro-scale chemical composition,microstructure,hardness,and tensile deformation behavior of Ti45Nb wires were investigated.The results show that wires with severe c...The effects of channel segregation on the macro-and micro-scale chemical composition,microstructure,hardness,and tensile deformation behavior of Ti45Nb wires were investigated.The results show that wires with severe channel segregation exhibit a macroscopic chemical composition identical to those without segregation,and 3D X-ray imaging result also reveals no abnormalities.After annealing,both types of wires exhibit an equiaxed single-phase microstructure with comparable grain sizes,suggesting that channel segregation has negligible influence on the macroscopic composition and grain size.Metallographic examination reveals that channel segregation manifests as spot-like features in the transverse section and band-like structures in the longitudinal section.EDS analysis identifies these regions as Ti-enriched segregations,with a Ti content higher than that of the surrounding matrix by approximately 4.42wt%.Compared to segregation-free wires,those containing extensive channel segregation demonstrate a 15.5%increase in ultimate tensile strength and a 12.3%increase in yield strength,but suffer a reduction in elongation and reduction of area by 19.8%and 18.9%,respectively.Furthermore,the mechanical properties of wires with segregation show significant fluctuations.Fractographic analysis reveals a larger fracture surface area in segregated wires.Severe dislocation pile-ups occur at the interfaces of these segregated regions,initiating microcrack nucleation.This promotes rapid crack propagation of the Ti45Nb wire,leading to a significant decrease in plasticity and reduction of area.展开更多
Classical computation of electronic properties in large-scale materials remains challenging.Quantum computation has the potential to offer advantages in memory footprint and computational scaling.However,general and v...Classical computation of electronic properties in large-scale materials remains challenging.Quantum computation has the potential to offer advantages in memory footprint and computational scaling.However,general and viable quantum algorithms for simulating large-scale materials are still limited.We propose and implement random-state quantum algorithms to calculate electronic-structure properties of real materials.Using a random state circuit on a small number of qubits,we employ real-time evolution with first-order Trotter decomposition and Hadamard test to obtain electronic density of states,and we develop a modified quantum phase estimation algorithm to calculate real-space local density of states via direct quantum measurements.Furthermore,we validate these algorithms by numerically computing the density of states and spatial distributions of electronic states in graphene,twisted bilayer graphene quasicrystals,and fractal lattices,covering system sizes from hundreds to thousands of atoms.Our results manifest that the random-state quantum algorithms provide a general and qubit-efficient route to scalable simulations of electronic properties in large-scale periodic and aperiodic materials.展开更多
Three zinc(Ⅱ),nickel(Ⅱ),and cadmium(Ⅱ)complexes,namely[Zn(μ-Htpta)(py)_(2)]n(1),[Ni(H_(2)biim)2(H_(2)O)2][Ni(tpta)(H_(2)biim)2(H_(2)O)]2·3H_(2)O(2),and[Cd_(3)(μ4-tpta)2(μ-dpe)_(3)]_(n)(3),have been construc...Three zinc(Ⅱ),nickel(Ⅱ),and cadmium(Ⅱ)complexes,namely[Zn(μ-Htpta)(py)_(2)]n(1),[Ni(H_(2)biim)2(H_(2)O)2][Ni(tpta)(H_(2)biim)2(H_(2)O)]2·3H_(2)O(2),and[Cd_(3)(μ4-tpta)2(μ-dpe)_(3)]_(n)(3),have been constructed hydrothermally at 160℃ using H_(3)tpta([1,1':3',1″-terphenyl]-4,4',5'-tricarboxylic acid),py(pyridine),H_(2)biim(2,2'-biimidazole),dpe(1,2-di(4-pyridyl)ethylene),and zinc,nickel and cadmium chlorides,resulting in the formation of stable crystalline solids which were subsequently analyzed using infrared spectroscopy,element analysis,thermogravimetric analysis,as well as structural analyses conducted via single-crystal X-ray diffraction.The findings from these single-crystal Xray diffraction studies indicate that complexes 1-3 form crystals within the monoclinic system P2_(1)/c space group(1)or triclinic system P1 space group(2 and 3),and possess 1D,0D,and 3D structures,respectively.Complex 1 demonstrated substantial catalytic efficiency and excellent reusability as a heterogeneous catalyst in the reaction of Knoevenagel condensation under ambient temperature conditions.In addition,complex 1 also showcased notable anti-wear performance when used in polyalphaolefin synthetic lubricants.CCDC:2449810,1;2449811,2;2449812,3.展开更多
Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively invest...Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.展开更多
Copper manufactured by laser powder bed fusion(LPBF)process typically exhibits poor strength-ductility coordination,and the addition of strengthening phases is an effective way to address this issue.To explore the eff...Copper manufactured by laser powder bed fusion(LPBF)process typically exhibits poor strength-ductility coordination,and the addition of strengthening phases is an effective way to address this issue.To explore the effects of strengthening phases on Cu,Cu-carbon nanotubes(CNTs)composites were prepared using LPBF technique with Cu-CNTs mixed powder as the matrix.The formability,microstructure,mechanical properties,electrical conductivity,and thermal properties were studied.The result shows that the prepared composites have high relative density.The addition of CNTs results in inhomogeneous equiaxed grains at the edges of the molten pool and columnar grains at the center.Compared with pure copper,the overall mechanical properties of the composite are improved:tensile strength increases by 52.8%and elongation increases by 146.4%;the electrical and thermal properties are also enhanced:thermal conductivity increases by 10.8%and electrical conductivity increases by 12.7%.展开更多
The hydrated tricyclohexyltin theophylline-7-acetic acid(tpH)complex[Sn(C_(6)H_(11))_(3)(tp)(H_(2)O)]was synthesized via an ethanol solvothermal method using tricyclohexyltin hydroxide and tpH in a 1∶1 molar ratio.Th...The hydrated tricyclohexyltin theophylline-7-acetic acid(tpH)complex[Sn(C_(6)H_(11))_(3)(tp)(H_(2)O)]was synthesized via an ethanol solvothermal method using tricyclohexyltin hydroxide and tpH in a 1∶1 molar ratio.The complex was characterized by IR,^(1)H(^(13)C)NMR,elemental analysis,and powder X-ray diffraction,and the crystal structure was determined by single-crystal X-ray diffraction.The crystal belongs to the orthorhombic system with space group Iba2,and the central tin atom is in a five-coordinated trigonal bipyramidal configuration.Quantum chemistry ab initio calculations were performed to investigate the stability,molecular orbital energy,and frontier molecular orbital characteristics of the complex.Additionally,its thermal stability,electrochemical properties,and in vitro anticancer activity were evaluated.CCDC:2380308.展开更多
The effect of warm rolling temperature(500-900℃)on the microstructure and mechanical properties was investigated for a Ni-W-Co-Ta alloy to achieve excellent strength-plasticity synergy.The results showed that the all...The effect of warm rolling temperature(500-900℃)on the microstructure and mechanical properties was investigated for a Ni-W-Co-Ta alloy to achieve excellent strength-plasticity synergy.The results showed that the alloy exhibited high-density dislocations and deformation bands when rolled below 750℃.The nano-Ni4W phase precipitated when rolled at 700-900℃,with the higher deformation temperature,the amount and size of precipitates increased.At 900℃,dissolution of the precipitated Ni4W and dynamic recrystallization of the matrix occurred.Consequently,the strength and hardness firstly decreased,then increased,and decreased again as the deformation temperature increased.An excellent strength-plasticity synergy was achieved through the combined effects of precipitation strengthening and deformation twins strengthening of Ni4W:with a tensile strength of 2010 MPa,a yield strength of 1839 MPa,a microhardness of HV 587,and an elongation of 13.2%when the alloy was warm-rolled at 750℃.展开更多
To investigate the effects of extrusion temperature on the microstructure and mechanical properties of WE43 magnesium alloy,extrusion experiments were conducted under 330,380,430,and 450℃,and the extrusion ratio was ...To investigate the effects of extrusion temperature on the microstructure and mechanical properties of WE43 magnesium alloy,extrusion experiments were conducted under 330,380,430,and 450℃,and the extrusion ratio was 16.The experimental results indicate that,at a low temperature of 330℃,the alloy precipitates a large amount of second phases rich in Zr elements.Moreover,the texture strength and kernel average misorientation value are the highest,with values of 27.77 and 0.71,respectively.The increase in extrusion temperature leads to a gradual decrease in texture strength and kernel average misorientation value.The strength of the alloy is the highest at an extrusion temperature of 330℃.Its tensile yield stress is 254.7 MPa and ultimate tensile strength is 302.7 MPa,respectively.As the extrusion temperature increases,the strength of the alloy gradually decreases.At an extrusion temperature of 450℃,the tensile yield stress is 181.3 MPa and ultimate tensile strength is 265.7 MPa,respectively.The elongation first increases and then decreases,with an elongation of 20.9%at an extrusion temperature of 330℃.At an extrusion temperature of 430℃,the elongation reaches its maximum value,which is 23.6%.At an extrusion temperature of 450℃,the elongation reaches its lowest value,which is 16.4%.展开更多
The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(...The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.展开更多
Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic ...Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.展开更多
The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepar...The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.展开更多
Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to ...Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.展开更多
The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and propertie...The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.展开更多
The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected trans...The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected transmission electron microscopy and first-principles calculations,the underlying micromechanisms of Sc microalloying were revealed.Results show that the increase in strength of the AA7085-Sc alloy is mainly attributed to the decreased Al grain size and increased number density of both Al_(3)Sc@Al_(3)(Sc,Zr)core−shell nanoparticles and Sc-containingη_(p) and GP−η_(p) nanoprecipitates.Strong strain fields and evident electron transfer from Zr to the neighboring matrix Al atoms exist at the Al_(3)Sc@Al_(3)(Sc,Zr)/Al interface.The Sc doping in GP−η_(p) andη_(p) suppresses the GP−η_(p)→η_(p) transformation.Modified corrosion resistance of the AA7085-Sc alloy compared with AA7085 alloy is associated with the fine grain boundary precipitates ofη_(p)hases and narrow precipitation free zone.The reasons of property changes of AA7085 alloy after Sc microalloying are explored based on the multiscale microstructural characterization.展开更多
The influence of oscillation amplitude on molten pool thermal history,weld morphology characteristics,microstructural evolution,and mechanical properties during laser oscillating welding of QP980 steel was systematica...The influence of oscillation amplitude on molten pool thermal history,weld morphology characteristics,microstructural evolution,and mechanical properties during laser oscillating welding of QP980 steel was systematically investigated.Results show that laser beam oscillation significantly regulates molten pool thermomechanical behavior through optimized spatial energy distribution,thereby enabling microstructural reconstruction and joint performance enhancement.As the oscillation amplitude increases from 0 to 0.8 mm,the molten pool duration extends to 1.7 times the original value,while peak temperature and average cooling rate decrease by 19%and 39%,respectively.This thermal regulation promotes weld surface width expansion from 0.72 to 1.07 mm.The welding mode undergoes a progressive transition from keyhole mode→transitional mode→conduction mode.This transformation effectively suppresses porosity defects,substantially reducing porosity from 1.8%to 0.15%.Microstructural analysis indicates that oscillation modifies the maximum temperature gradient direction within the molten pool,facilitating preferential growth of coarse columnar grains along the welding centerline to establish load-transfer-favorable crystallographic orientations.The synergistic effects of these factors substantially improve joint mechanical properties:lap joint shear load increases by 81.5%(7.6→13.8 kN),and fracture elongation is enhanced by 135%(0.98→2.3 mm).The operational principles of laser oscillation parameters on the welding quality of QP980 steel were elucidated,providing theoretical foundations for joining process optimization.展开更多
Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of re...Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.展开更多
文摘Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.
基金Tianjin Municipal Natural Science Foundation(23JCYBJC00040)National Natural Science Foundation of China(52175369)。
文摘The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.
基金supported by the National Natural Science Foundation of China(No.42077135).
文摘Heavy metal contamination of soil is one of the major challenges to sustainable agriculture.This contamination can be transmitted through the soil food chain and poses a serious threat to human health.In this study,we found that freeze-thaw leaching(FTL)effectively complements the low removal rate of chemical leaching,and investigated the effects of different numbers of FTL on Cd contamination,soil chemical properties and microbial communities.The results showed that repeated FTL significantly reduced(P<0.05)the total Cd content in the top soil(19.02%-49.35%)and subsoil(0.41%-21.13%)and promoted the transformation of Cd to a more stable form,mainly through various removal mechanisms such as complexation,ion-exchange,and chemical precipitation.This finding was supported by reductions in several soil properties,including pH,available potassium(AK),and available phosphorus(AP).FTL treatment initially increased the bioavailability of Cd compared to chemical leaching,but bioavailability of Cd progressively decreased as the number of freeze-thaw cycles increased.Additionally,FTL reduced the richness and diversity of bacteria communities,destabilized ecological symbiotic networks,while increasing the richness and diversity of fungi in the soil.Various model analyses indicated that FTL treatment,available Cd,soil pH,AP and AK were the key drivers influencing the changes in microbial community structure.This study provides new insights and scientific bases for the effective management of heavy metal pollution in agricultural soils,the restoration of ecosystem health,and the improvement of soil sustainability.
基金National Natural Science Foundation of China(51774179)Natural Science Foundation of Liaoning Province(20180550546)+2 种基金Joint Fund of State Key Laboratory of Metal Material for Marine Equipment and Application(HGSKL-USTLN(2021)03)High-Level Talent Fund of USTL(6003000377,6003000294)supported by Liaoning Provincial Department of Education(LJ212410146037)。
文摘The effect of element Ti on the microstructures and mechanical properties of as-cast and annealed NbTaMoWTi,(x=0,1,1.5,2)refractory high-entropy alloys(RHEAs)was investigated.Results show that after Ti addition,the as-cast alloys maintain their original single body-centered cubic(bcc)structure.As for the mechanical properties,compared with those without Ti addition,the strength and ductility of NbTaMoWTi,alloys increase by 93%and 215%,respectively.Furthermore,the NbTaMoWTi alloys exhibit outstanding thermal stability.After annealing at 1400 C,they still maintain the single bcc structure,and their mechanical properties are even slightly improved.However,annealing leads to a significant deterioration in the mechanical properties of high-Ti-content alloys(NbTaMoWTil and NbTaMoWTi2),owing to the formation of Ti-rich acicular phases.
基金National Natural Science Foundation of China(U24A2038)。
文摘The effects of channel segregation on the macro-and micro-scale chemical composition,microstructure,hardness,and tensile deformation behavior of Ti45Nb wires were investigated.The results show that wires with severe channel segregation exhibit a macroscopic chemical composition identical to those without segregation,and 3D X-ray imaging result also reveals no abnormalities.After annealing,both types of wires exhibit an equiaxed single-phase microstructure with comparable grain sizes,suggesting that channel segregation has negligible influence on the macroscopic composition and grain size.Metallographic examination reveals that channel segregation manifests as spot-like features in the transverse section and band-like structures in the longitudinal section.EDS analysis identifies these regions as Ti-enriched segregations,with a Ti content higher than that of the surrounding matrix by approximately 4.42wt%.Compared to segregation-free wires,those containing extensive channel segregation demonstrate a 15.5%increase in ultimate tensile strength and a 12.3%increase in yield strength,but suffer a reduction in elongation and reduction of area by 19.8%and 18.9%,respectively.Furthermore,the mechanical properties of wires with segregation show significant fluctuations.Fractographic analysis reveals a larger fracture surface area in segregated wires.Severe dislocation pile-ups occur at the interfaces of these segregated regions,initiating microcrack nucleation.This promotes rapid crack propagation of the Ti45Nb wire,leading to a significant decrease in plasticity and reduction of area.
基金supported by the Major Project for the Integration of ScienceEducation and Industry (Grant No.2025ZDZX02)。
文摘Classical computation of electronic properties in large-scale materials remains challenging.Quantum computation has the potential to offer advantages in memory footprint and computational scaling.However,general and viable quantum algorithms for simulating large-scale materials are still limited.We propose and implement random-state quantum algorithms to calculate electronic-structure properties of real materials.Using a random state circuit on a small number of qubits,we employ real-time evolution with first-order Trotter decomposition and Hadamard test to obtain electronic density of states,and we develop a modified quantum phase estimation algorithm to calculate real-space local density of states via direct quantum measurements.Furthermore,we validate these algorithms by numerically computing the density of states and spatial distributions of electronic states in graphene,twisted bilayer graphene quasicrystals,and fractal lattices,covering system sizes from hundreds to thousands of atoms.Our results manifest that the random-state quantum algorithms provide a general and qubit-efficient route to scalable simulations of electronic properties in large-scale periodic and aperiodic materials.
文摘Three zinc(Ⅱ),nickel(Ⅱ),and cadmium(Ⅱ)complexes,namely[Zn(μ-Htpta)(py)_(2)]n(1),[Ni(H_(2)biim)2(H_(2)O)2][Ni(tpta)(H_(2)biim)2(H_(2)O)]2·3H_(2)O(2),and[Cd_(3)(μ4-tpta)2(μ-dpe)_(3)]_(n)(3),have been constructed hydrothermally at 160℃ using H_(3)tpta([1,1':3',1″-terphenyl]-4,4',5'-tricarboxylic acid),py(pyridine),H_(2)biim(2,2'-biimidazole),dpe(1,2-di(4-pyridyl)ethylene),and zinc,nickel and cadmium chlorides,resulting in the formation of stable crystalline solids which were subsequently analyzed using infrared spectroscopy,element analysis,thermogravimetric analysis,as well as structural analyses conducted via single-crystal X-ray diffraction.The findings from these single-crystal Xray diffraction studies indicate that complexes 1-3 form crystals within the monoclinic system P2_(1)/c space group(1)or triclinic system P1 space group(2 and 3),and possess 1D,0D,and 3D structures,respectively.Complex 1 demonstrated substantial catalytic efficiency and excellent reusability as a heterogeneous catalyst in the reaction of Knoevenagel condensation under ambient temperature conditions.In addition,complex 1 also showcased notable anti-wear performance when used in polyalphaolefin synthetic lubricants.CCDC:2449810,1;2449811,2;2449812,3.
文摘Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.
基金National Key Research and Development Program of China(2023YFB4606400)Supported by Longmen Laboratory Frontier Exploration Topics(LMQYTSKT003)。
文摘Copper manufactured by laser powder bed fusion(LPBF)process typically exhibits poor strength-ductility coordination,and the addition of strengthening phases is an effective way to address this issue.To explore the effects of strengthening phases on Cu,Cu-carbon nanotubes(CNTs)composites were prepared using LPBF technique with Cu-CNTs mixed powder as the matrix.The formability,microstructure,mechanical properties,electrical conductivity,and thermal properties were studied.The result shows that the prepared composites have high relative density.The addition of CNTs results in inhomogeneous equiaxed grains at the edges of the molten pool and columnar grains at the center.Compared with pure copper,the overall mechanical properties of the composite are improved:tensile strength increases by 52.8%and elongation increases by 146.4%;the electrical and thermal properties are also enhanced:thermal conductivity increases by 10.8%and electrical conductivity increases by 12.7%.
文摘The hydrated tricyclohexyltin theophylline-7-acetic acid(tpH)complex[Sn(C_(6)H_(11))_(3)(tp)(H_(2)O)]was synthesized via an ethanol solvothermal method using tricyclohexyltin hydroxide and tpH in a 1∶1 molar ratio.The complex was characterized by IR,^(1)H(^(13)C)NMR,elemental analysis,and powder X-ray diffraction,and the crystal structure was determined by single-crystal X-ray diffraction.The crystal belongs to the orthorhombic system with space group Iba2,and the central tin atom is in a five-coordinated trigonal bipyramidal configuration.Quantum chemistry ab initio calculations were performed to investigate the stability,molecular orbital energy,and frontier molecular orbital characteristics of the complex.Additionally,its thermal stability,electrochemical properties,and in vitro anticancer activity were evaluated.CCDC:2380308.
基金supported by the National Key Research and Development Program of China(No.2022YFB3705200)the National Natural Science Foundation of China(Nos.U1804146,51905153,52111530068)the Major Science and Technology Project of Henan Province,China(No.221100230200)。
文摘The effect of warm rolling temperature(500-900℃)on the microstructure and mechanical properties was investigated for a Ni-W-Co-Ta alloy to achieve excellent strength-plasticity synergy.The results showed that the alloy exhibited high-density dislocations and deformation bands when rolled below 750℃.The nano-Ni4W phase precipitated when rolled at 700-900℃,with the higher deformation temperature,the amount and size of precipitates increased.At 900℃,dissolution of the precipitated Ni4W and dynamic recrystallization of the matrix occurred.Consequently,the strength and hardness firstly decreased,then increased,and decreased again as the deformation temperature increased.An excellent strength-plasticity synergy was achieved through the combined effects of precipitation strengthening and deformation twins strengthening of Ni4W:with a tensile strength of 2010 MPa,a yield strength of 1839 MPa,a microhardness of HV 587,and an elongation of 13.2%when the alloy was warm-rolled at 750℃.
基金Funded by the Fundamental Research Program of Shanxi Province(No.202203021211191)。
文摘To investigate the effects of extrusion temperature on the microstructure and mechanical properties of WE43 magnesium alloy,extrusion experiments were conducted under 330,380,430,and 450℃,and the extrusion ratio was 16.The experimental results indicate that,at a low temperature of 330℃,the alloy precipitates a large amount of second phases rich in Zr elements.Moreover,the texture strength and kernel average misorientation value are the highest,with values of 27.77 and 0.71,respectively.The increase in extrusion temperature leads to a gradual decrease in texture strength and kernel average misorientation value.The strength of the alloy is the highest at an extrusion temperature of 330℃.Its tensile yield stress is 254.7 MPa and ultimate tensile strength is 302.7 MPa,respectively.As the extrusion temperature increases,the strength of the alloy gradually decreases.At an extrusion temperature of 450℃,the tensile yield stress is 181.3 MPa and ultimate tensile strength is 265.7 MPa,respectively.The elongation first increases and then decreases,with an elongation of 20.9%at an extrusion temperature of 330℃.At an extrusion temperature of 430℃,the elongation reaches its maximum value,which is 23.6%.At an extrusion temperature of 450℃,the elongation reaches its lowest value,which is 16.4%.
基金supported by the Jiangxi Provincial Natural Science Foundation of China(Grant number 20224BAB204049)the Fund Project of Jiangxi Provincial Department of Education(Grant number GJJ2200602)the National Natural Science Foundation of China(Grant number 52205194)。
文摘The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.
基金financially and technically supported by the National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact,Beijing Institute of Technology,China(No.WDZC2024-1)。
文摘Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.
基金the financial support by the Major Science and Technology Achievement Transformation Project in Heilongjiang Province(No.ZC2023SH0075)the National Natural Science Foundation of China(Nos.52425401,U2441255,52474377,and 52371015)+1 种基金the Young Elite Scientists Sponsorship·Program by CAST(No.2021QNRC001)the Henan Provincial Key Research and Development&Promotion Special Program(No.251111231400)。
文摘The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.
基金supported by the Key R&D Projects in Heilongjiang Province(GA23A901)。
文摘Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.
基金financially supported by the National Key Research and Development Program of China(Nos.2022YFB3709300,2021YFB3701000)the National Natural Science Foundation of China(Nos.52271090,52071036,U2037601,U21A2048)+1 种基金Chongqing Science and Technology Commission,China(Nos.CSTB2022TIAD-KPX0021,CSTC2024YCJHBGZXM0164,CSTB2024TIAD-KPX0001)the Fundamental Research Funds for the Central Universities,China(No.2022CDJDX-002)。
文摘The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.
基金the support from the National Natural Science Foundation of China (Nos. U20A20274, 52061003)the Natural Science Foundation of Yunnan Province, China (No. 202301AT070209)the Science and Technology Major Project of Yunnan Province, China (No. 202102AG050017)。
文摘The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected transmission electron microscopy and first-principles calculations,the underlying micromechanisms of Sc microalloying were revealed.Results show that the increase in strength of the AA7085-Sc alloy is mainly attributed to the decreased Al grain size and increased number density of both Al_(3)Sc@Al_(3)(Sc,Zr)core−shell nanoparticles and Sc-containingη_(p) and GP−η_(p) nanoprecipitates.Strong strain fields and evident electron transfer from Zr to the neighboring matrix Al atoms exist at the Al_(3)Sc@Al_(3)(Sc,Zr)/Al interface.The Sc doping in GP−η_(p) andη_(p) suppresses the GP−η_(p)→η_(p) transformation.Modified corrosion resistance of the AA7085-Sc alloy compared with AA7085 alloy is associated with the fine grain boundary precipitates ofη_(p)hases and narrow precipitation free zone.The reasons of property changes of AA7085 alloy after Sc microalloying are explored based on the multiscale microstructural characterization.
基金supported by the National Natural Science Foundation of China(Grant Nos.51805084 and 52474401)Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2023B1515120086 and 2025A1515012873).
文摘The influence of oscillation amplitude on molten pool thermal history,weld morphology characteristics,microstructural evolution,and mechanical properties during laser oscillating welding of QP980 steel was systematically investigated.Results show that laser beam oscillation significantly regulates molten pool thermomechanical behavior through optimized spatial energy distribution,thereby enabling microstructural reconstruction and joint performance enhancement.As the oscillation amplitude increases from 0 to 0.8 mm,the molten pool duration extends to 1.7 times the original value,while peak temperature and average cooling rate decrease by 19%and 39%,respectively.This thermal regulation promotes weld surface width expansion from 0.72 to 1.07 mm.The welding mode undergoes a progressive transition from keyhole mode→transitional mode→conduction mode.This transformation effectively suppresses porosity defects,substantially reducing porosity from 1.8%to 0.15%.Microstructural analysis indicates that oscillation modifies the maximum temperature gradient direction within the molten pool,facilitating preferential growth of coarse columnar grains along the welding centerline to establish load-transfer-favorable crystallographic orientations.The synergistic effects of these factors substantially improve joint mechanical properties:lap joint shear load increases by 81.5%(7.6→13.8 kN),and fracture elongation is enhanced by 135%(0.98→2.3 mm).The operational principles of laser oscillation parameters on the welding quality of QP980 steel were elucidated,providing theoretical foundations for joining process optimization.
基金Funded by Natural Science Foundation of Guangxi(No.2025GXNSFBA069565)Guangxi Science and Technology Program(No.AD25069101)Guangxi Bagui Scholars Fund。
文摘Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.
