The emergence of high-throughput techniques for proteomics measurement has led to an increasing number of proteogenomic studies that aim to reveal protein quantitative trait loci(pQTL)based on large cohorts(Suhre et a...The emergence of high-throughput techniques for proteomics measurement has led to an increasing number of proteogenomic studies that aim to reveal protein quantitative trait loci(pQTL)based on large cohorts(Suhre et al.,2017;Sun et al.,2018;Yao et al.,2018;Folkersen et al.,2020;Ferkingstad et al.,2021;Pietzner et al.,2021).展开更多
Leaf-color mutations are a widely-observed class of mutations, playing an important role in the study of chlorophyll biosynthesis and plant chloroplast structure, function, genetics and development. A naturally-occurr...Leaf-color mutations are a widely-observed class of mutations, playing an important role in the study of chlorophyll biosynthesis and plant chloroplast structure, function, genetics and development. A naturally-occurring leaf-color rice mutant, Baihuaidao 7, was analyzed. Mutant plants typically exhibited a green-white-green leaf-color progression, but this phenotype was only expressed in the presence of a stress signal induced by mechanical scarification such as transplantation. Prior to the appearance of white ~eaves, mutant plant growth, leaf color, chlorophyll content, and chloroplast ultrastructure appeared to be identical to those of the wild type. After the changeover to white leaf color, an examination of the mutated leaves revealed a decrease in total chlorophyll, chlorophyll a, chlorophyll b, and carotenoid content, a reduction in the number of chloroplast grana lamella and grana, and a gradual degradation of the thylakoid lamellas. At maturity, the mutant plant was etiolated and dwarfed compared with wild-type plants. Genetic analysis indicated that the leaf mutant character is controlled by a recessive nuclear gene. Genetic mapping of the mutant gene was performed using an F2 population derived from a Baihuaidao 7 ~ Jiangxi 1587 cross. The mutant gene was mapped to rice chromosome 11, positioned between InDel markers L59.2-7 and L64.8-11, which are separated by approximately 740.5 kb. The mutant gene is believed to be a new leaf-color mutant gene in rice, and is tentatively designated as gwgl.展开更多
Neural stem cells,which are capable of multi-potential differentiation and self-renewal,have recently been shown to have clinical potential for repairing central nervous system tissue damage.However,the theme trends a...Neural stem cells,which are capable of multi-potential differentiation and self-renewal,have recently been shown to have clinical potential for repairing central nervous system tissue damage.However,the theme trends and knowledge structures for human neural stem cells have not yet been studied bibliometrically.In this study,we retrieved 2742 articles from the PubMed database from 2013 to 2018 using "Neural Stem Cells" as the retrieval word.Co-word analysis was conducted to statistically quantify the characteristics and popular themes of human neural stem cell-related studies.Bibliographic data matrices were generated with the Bibliographic Item Co-Occurrence Matrix Builder.We identified 78 high-frequency Medical Subject Heading(MeSH)terms.A visual matrix was built with the repeated bisection method in gCLUTO software.A social network analysis network was generated with Ucinet 6.0 software and GraphPad Prism 5 software.The analyses demonstrated that in the 6-year period,hot topics were clustered into five categories.As suggested by the constructed strategic diagram,studies related to cytology and physiology were well-developed,whereas those related to neural stem cell applications,tissue engineering,metabolism and cell signaling,and neural stem cell pathology and virology remained immature.Neural stem cell therapy for stroke and Parkinson’s disease,the genetics of microRNAs and brain neoplasms,as well as neuroprotective agents,Zika virus,Notch receptor,neural crest and embryonic stem cells were identified as emerging hot spots.These undeveloped themes and popular topics are potential points of focus for new studies on human neural stem cells.展开更多
It is a challenge to identify each phase in a multi-component polymer system and uniquely determine the interfacial properties between the different phases.Using atomic force microscopy nanomechanical mapping(AFM-NM)a...It is a challenge to identify each phase in a multi-component polymer system and uniquely determine the interfacial properties between the different phases.Using atomic force microscopy nanomechanical mapping(AFM-NM)and AFM-based infrared spectroscopy(AFM-IR),we identify each phase,visualize structural developments,and determine the interfacial properties in a blend of three polymers:high-density polyethylene(HDPE),polyamide(PA6)and poly(styrene-b-ethylene-co-butylene-b-styrene)(SEBS).Each phase can be identified from the Young’s modulus,along with the structural development within the phases before and after compatibilization.The interfacial widths between HDPE/PA6,HDPE/SEBS and SEBS/PA6 were determined independently in one measurement from a Young’s modulus map.The structural,mechanical property development and identity of the phases were determined by AFM-NM,while AFM-IR,providing complementary chemical information,identified interfacial reactions,showed the chemical affinity of a compatibilizer with the component phases,and mapped the distribution of the compatibilizer in the ternary polymer blends.The chemical,structural and interfacial information obtained by these measurements provide information that is essential for producing mechanically robust materials from incompatible mixtures of polymers.展开更多
A physical value mapping （PVM） algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from...A physical value mapping （PVM） algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from the mesh of the product to the mesh of the stamped part will be adopted. At the same time, the search process is divided into two steps： entire search （ES） and local search （LS）, which improve the searching efficiency. The searching area is enlarged to avoid missing projection elements in ES process. An arc-length method is introduced in LS process. The validity is confirmed by the results of the complex industry-forming product.展开更多
An efficient and reliable automated model that can map physical Soil and Water Conservation（SWC） structures on cultivated land was developed using very high spatial resolution imagery obtained from Google Earth and ...An efficient and reliable automated model that can map physical Soil and Water Conservation（SWC） structures on cultivated land was developed using very high spatial resolution imagery obtained from Google Earth and Arc GIS？ERDAS IMAGINE？and SDC Morphology Toolbox for MATLAB and statistical techniques. The model was developed using the following procedures：（1） a high-pass spatial filter algorithm was applied to detect linear features,（2） morphological processing was used to remove unwanted linear features,（3） the raster format was vectorized,（4） the vectorized linear features were split per hectare（ha） and each line was then classified according to its compass directionand（5） the sum of all vector lengths per class of direction per ha was calculated. Finallythe direction class with the greatest length was selected from each ha to predict the physical SWC structures. The model was calibrated and validated on the Ethiopian Highlands. The model correctly mapped 80% of the existing structures. The developed model was then tested at different sites with different topography. The results show that the developed model is feasible for automated mapping of physical SWC structures. Thereforethe model is useful for predicting and mapping physical SWC structures areas across diverse areas.展开更多
Five-fold twinned nanostructures are intrinsically strained or relaxed by extended defects to satisfy the space-filling requirement.Although both of metallic and semiconductor five-fold twinned nanostructures show inh...Five-fold twinned nanostructures are intrinsically strained or relaxed by extended defects to satisfy the space-filling requirement.Although both of metallic and semiconductor five-fold twinned nanostructures show inhomogeneity in their cross-sectional strain distribution,the evident strain concentration at twin boundaries in the semiconductor systems has been found in contrast to the metallic systems.Naturally,a problem is raised how the chemical bonding characteristics of various five-fold twinned nanosystems affects their strain-relieving defect structures.Here using three-dimensional(3D)electron diffraction mapping methodology,the intrinsic strain and the strain-relieving defects in a pentagonal Ag nanowire and a star-shaped boron carbide nanowire,both of them have basically equal radial twin-plane width about 30 nm,are nondestructively characterized.The non-uniform strain and defect distribution between the five single crystalline segments are found in both of the five-fold twinned nanowires.Diffraction intensity fine structure analysis for the boron carbide five-fold twinned nanowire indicates the presence of high-density of planar defects which are responsible for the accommodation of the intrinsic angular excess.However,for the Ag five-fold twinned nanowire,the star-disclination strain field is still present,although is partially relieved by the formation of localized stacking fault layers accompanied by partial dislocations.Energetic analysis suggests that the variety in the strain-relaxation ways for the two types of five-fold twinned nanowires could be ascribed to the large difference in shear modulus between the soft noble metal Ag and the superhard covalent compound boron carbide.展开更多
In order to solve the problem of substantial computational resources of lattice structure during optimization, a local relative density mapping(LRDM) method is proposed. The proposed method uses solid isotropic micros...In order to solve the problem of substantial computational resources of lattice structure during optimization, a local relative density mapping(LRDM) method is proposed. The proposed method uses solid isotropic microstructures with penalization to optimize a model at the macroscopic scale. The local relative density information is obtained from the topology optimization result. The contour lines of an optimized model are extracted using a density contour approach, and the triangular mesh is generated using a mesh generator. A local mapping relationship between the elements’ relative density and the struts’ relative cross?sectional area is established to automatically determine the diameter of each individual strut in the lattice structures. The proposed LRDM method can be applied to local finite element meshes and local density elements, but it is also suitable for global ones. In addition, some cases are con?sidered in order to test the e ectiveness of the LRDM method. The results show that the solution time of the LRDM is lower than the RDM method by approximately 50%. The proposed method provides instructions for the design of more complex lattice structures.展开更多
Time-varying stiffness is one of the most important dynamic characteristics of rolling element bearings.The method of analyzing the elements in the bearing stiffness matrix is usually adopted to investigate the charac...Time-varying stiffness is one of the most important dynamic characteristics of rolling element bearings.The method of analyzing the elements in the bearing stiffness matrix is usually adopted to investigate the characteristics of bearing stiffness.Linear mapping structure of the bearing stiffness matrix is helpful to understand the varying compliance excitation and its influence on vibration transmission.In this study,a method to analyze the mapping structure of bearing stiffness matrix is proposed based on the singular value decomposition of block matrices in the stiffness matrix.Not only does this method have the advantages of coordinate transformation independence and unit independence,but also the analysis procedure involved is geometrically intuitive.The time-varying stiffness matrix of double-row tapered bearing is calculated and analyzed using the proposed method under two representative load cases.The principal stiffnesses and principal axes defined in the method together indicate the dominant and insignificant stiffness properties with the corresponding directions,and the vibration transmission properties are also revealed.Besides,the coupling behaviors between different shaft motions are found during the analysis of mapping structure.The mechanism of the generation of varying compliance excitation is also revealed.展开更多
The cell mechanical features are largely regulated by actin cytokeleton. By analyzing the mechanical features, it is possible to evaluate the characteristics of the complicated actin cytoskeleton in diverse cell types...The cell mechanical features are largely regulated by actin cytokeleton. By analyzing the mechanical features, it is possible to evaluate the characteristics of the complicated actin cytoskeleton in diverse cell types. In this study, we examined the sub-membrane mechanical structures of normal fibroblasts TIG-1 cells, and cervical cancer Hela cells using local elasticity mapping method of atomic force microscope. Especially we aimed at clarifying the regulatory mechanisms of sub-membrane actin structures in these cells by activation of actomyosin formation using calyculin A. This technique revealed that TIG-1 and Hela cells bore clearly different sub-membrane mechanical structures. TIG-1 cells had aligned stiff filamentous structures, whereas Hela cells had crooked and relatively soft filaments. The surface stiffness of TIG-1 cells increased slightly by actomyosin formation due to stiffness increase of the aligned filamentous structures. On the other hand, the surface stiffness of Hela cells increased by actomyosin formation due to upregulation of the apical actin filaments. Therefore, the structural and regulatory differences of the apical actin filaments could be demonstrated by atomic force microscopy elasticity mapping analysis.展开更多
Equipment has dual nature: physical objects existing in nature, and artificial objects designed by human. The decision on the configuration and structural parameters of equipment is made by engineers based on technica...Equipment has dual nature: physical objects existing in nature, and artificial objects designed by human. The decision on the configuration and structural parameters of equipment is made by engineers based on technical-physical effects which control the behavioral parameters of the equipment. Sensors are mounted on the equipment to monitor the equipment state. Current methods for state monitoring and diagnosis mostly use mathematics and artificial intelligence technology to construct evaluation methods. This paper presents an integrated design and state maintenance method, in which graph and dual graph are used for recording design data and sensor arrangement and for mapping method from signals to substructures and connection pairs. An example of state maintenance of hydro power generating equipment is illustrated.展开更多
Faults and fractures of multiple scales are frequently induced and generated in compressional structural system. Comprehensive identification of these potential faults and fractures that cannot be distinguished direct...Faults and fractures of multiple scales are frequently induced and generated in compressional structural system. Comprehensive identification of these potential faults and fractures that cannot be distinguished directly from seismic profile of the complex structures is still an unanswered problem. Based on the compressional structural geometry and kinematics theories as well as the structural interpretation from seismic data, a set of techniques is established for the identification of potential faults and fractures in compressional structures. Firstly, three-dimensional(3D) patterns and characteristics of the faults directly interpreted from seismic profile were illustrated by 3D structural model. Then, the unfolding index maps, the principal structural curvature maps, and tectonic stress field maps were obtained from structural restoration. Moreover, potential faults and fractures in compressional structures were quantitatively identified relying on comprehensive analysis of these three maps. Successful identification of the potential faults and fractures in Mishrif limestone formation and in Asmari dolomite formation of Buzurgan anticline in Iraq demonstrates the applicability and reliability of these techniques.展开更多
The present study focuses on the analysis and description of lineaments interpreted as secondary structures to describe the nature of Senegalo Malian Discontinuity. These lineaments cross-cut the large north-south ori...The present study focuses on the analysis and description of lineaments interpreted as secondary structures to describe the nature of Senegalo Malian Discontinuity. These lineaments cross-cut the large north-south oriented transcurrent lithospheric structure known as the Senegalo Malian Discontinuity (SMD). Two lineaments were selected oriented NNE (N15˚ to N25˚), one at Dialafara and one at Sadiola. Four profiles on each lineament of these 2 zones, so that there were 2 on each side of the SMD. The ground data collected were processed using proper parameter and software. Some filters were applied to enhance the signal level. These ground data were later compared to the existing airborne magnetic data for consistency and accuracy using the upward continuation filter. The results show that the quality of ground data is good. In addition, the ground magnetic data show the presence of certain local anomalies that are not visible in the regional data. The analytical signal was also used to determine domain boundaries or possible contact zones. The contact zone can be highlighted on certain profiles such as L300 and L600. The study showed that the west and east sides of the SMD are not the same. Secondary structures become wide when approaching the SMD on both sides. They are also duplicated to the east of the SMD when we move progressively away. In the Dialafara area, the ground magnetic data intersect an interpreted fold. The results of this work confirm the presence of the secondary structures and their evolution in relation to the SMD. The relationships between the secondary structures in the Dailafara and Sadiola zones and their relations with the SMD are highlighted. The technique used in this study, is an important approach to better description and interpreting of regional structures using the secondary structures and proposing a structural model.展开更多
Taking autonomous driving and driverless as the research object,we discuss and define intelligent high-precision map.Intelligent high-precision map is considered as a key link of future travel,a carrier of real-time p...Taking autonomous driving and driverless as the research object,we discuss and define intelligent high-precision map.Intelligent high-precision map is considered as a key link of future travel,a carrier of real-time perception of traffic resources in the entire space-time range,and the criterion for the operation and control of the whole process of the vehicle.As a new form of map,it has distinctive features in terms of cartography theory and application requirements compared with traditional navigation electronic maps.Thus,it is necessary to analyze and discuss its key features and problems to promote the development of research and application of intelligent high-precision map.Accordingly,we propose an information transmission model based on the cartography theory and combine the wheeled robot’s control flow in practical application.Next,we put forward the data logic structure of intelligent high-precision map,and analyze its application in autonomous driving.Then,we summarize the computing mode of“Crowdsourcing+Edge-Cloud Collaborative Computing”,and carry out key technical analysis on how to improve the quality of crowdsourced data.We also analyze the effective application scenarios of intelligent high-precision map in the future.Finally,we present some thoughts and suggestions for the future development of this field.展开更多
Relying on the talent cultivation program of Chongqing Institute of Engineering,this paper combines the characteristics of the Engineering Costing Software Application course with its current status quo,analyzes the e...Relying on the talent cultivation program of Chongqing Institute of Engineering,this paper combines the characteristics of the Engineering Costing Software Application course with its current status quo,analyzes the existing problems and teaching pain points,and introduces knowledge mapping.The course construction is carried out in terms of the combing of knowledge points,the optimization of the course structure,the innovation of the teaching method,and the evaluation and feedback of the teaching in order to improve the systematicity and structural nature of the teaching content,enhance students’learning experience,and enhance their learning effect.It is conducive to the formation of students’knowledge systems and provides a basis for discussion and reference for improving the quality of teaching and cultivating application-oriented talents who meet the market demand.展开更多
The first important problem in the star forming process is the formation of proto star core in star forming regions of molecular cloud. The multi core structure in star forming regions is related to the forming of pro...The first important problem in the star forming process is the formation of proto star core in star forming regions of molecular cloud. The multi core structure in star forming regions is related to the forming of proto star core. The molecular radiation of C 18 O( J = 1-0) in Cepheus C has been observed. The C 18 O( J = 1-0) observations form the basis for an interesting study on the cloud cores and star formation activity in the cores of the Cepheus C. In order to study the multi core structure of C 18 O( J = 1-0) in the Cepheus C the channel maps and the position velocity diagrams of C 18 O( J = 1-0) will be shown. From the maps it is found that the contour level and distribution size of the three cores in Cepheus C are related to the channel velocity very much. The channel velocity of C 18 O( J = 1-0) molecules in core b, which distributed in all the channels velocity, is different with one in core a and core c very much. The C 18 O( J = 1-0) molecules in core a and core c of the Cepheus C mostly distributed in the blue shifted channel velocity relating to peak velocity, and only in -10.0 ～ -9.5 km/s, which is the red shifted channel velocity relating to peak velocity. And the contour level of C 18 O( J = 1-0) in -10.0 ～ -9.5 km/s is small and the distrbution size in the channel map is small. According to the position velocity diagrams the asymmetry of the distribution both blue shifted and red shifted components should reflect the asymmetry of the profile. From the diagrams it also is found that the contour level and the distribution size of the three cores are different from each other. Both results from the maps and diagrams are coincident with each other.展开更多
Fig.1.The GenomeSyn tool for visualizing genome synteny and characterizing structural variations.A:The first synteny visualization map showed the detailed information of two or three genomes and can display structural...Fig.1.The GenomeSyn tool for visualizing genome synteny and characterizing structural variations.A:The first synteny visualization map showed the detailed information of two or three genomes and can display structural variations and other annotation information.B:The second type of visualization map was simple and only showed the synteny relationship between the chromosomes of two or three genomes.C:Multiplatform general GenomeSyn submission page,applicable to Windows,MAC and web platforms;other analysis files can be entered in the"other"option.The publisher would like to apologise for any inconvenience caused.展开更多
With the increasing exploration of oil and gas into deep waters,the necessity for material development increases for lighter conduits such as composite marine risers,in the oil and gas industry.To understand the resea...With the increasing exploration of oil and gas into deep waters,the necessity for material development increases for lighter conduits such as composite marine risers,in the oil and gas industry.To understand the research knowledge on this novel area,there is a need to have a bibliometric analysis on composite marine risers.A research methodology was developed whereby the data retrieval was from SCOPUS database from 1977–2023.Then,VOSviewer was used to visualize the knowledge maps.This study focuses on the progress made by conducting knowledge mapping and scientometric review on composite marine risers.This scientometric analysis on the subject shows current advances,geographical activities by countries,authorship records,collaborations,funders,affiiliations,co‑occurrences,and future research areas.It was observed that the research trends recorded the highest publication volume in the U.S.A.,but less cluster affiiliated,as it was followed by countries like the U.K.,China,Nigeria,Australia and Singapore.Also,thisfiield has more conference papers than journal papers due to the challenge of adaptability,acceptance,qualifiication,and application of composite marine risers in the marine industry.Hence,there is a need for more collaborations on composite marine risers and more funding to enhance the research trend.展开更多
The Gold District of Korhogo, in the northern region of C?te d’Ivoire, holds enormous potential for gold mineralizations, some of which are under exploration phase and others in exploitation phase (example of Tongon ...The Gold District of Korhogo, in the northern region of C?te d’Ivoire, holds enormous potential for gold mineralizations, some of which are under exploration phase and others in exploitation phase (example of Tongon Gold Mine). Dormant since 1998, Mapping Services of most of the West African countries hardly provide geological maps at the scales of: 1/200,000, 1/50,000 and 1/25,000. This situation of unavailability of detailed geological maps does not help mining operators in the selection of prolific areas and also in the interpretation of in soil geochem anomies or gold mineralizations. Consequently, during the years 2020 and 2021, we have undertaken a campaign of geological mapping and petro-structural study of the northern sector of Komborodougou, located in the southern extension of Banfora Birimian Belt. This work, which allowed the realization of a geological map at 1/20,000 scale, reveals that: the mapped area includes three (3) major lithological units: 1) a volcano-sedimentary unit made up of metasediments (metaarenites, metasiltites and metaflyschs) and metavolcanites (metabasalts), which are metamorphosed and outcrop in the form of schists;2) a metaplutonic and intrusive unit composed on the one hand of quartz-diorites and metagabbros, and on the other hand of granites and granodiorites;3) and finally, a unit of dikes formed by microgranites, microgabbros, aplites and quartzites. The volcano-sedimentary complex is affected by a regional fold with an axis subparallel to the regional tectonic grain and an S1 schistosity oriented NE-SW to NNE-SSW with steep dips (>60o), except for those of the metaflyschs which are weak (o);a regional NW-SE compression would be at the origin of the setting of this schistosity. The volcano-sediment and metaplutonite complex is crossed in a NNE-SSW direction by a senetral shear-zone or main shear-zone and secondary shear-zones oriented sometimes NE-SW or N-S. These shear-zones are intersected by more or less dextral or senestral strike-slip faults of NW-SE and E-W trends. N-S to NNE-SSW (N0o - N20o) and NW-SE (N130o - N160o) vein systems associated with the various shear-zones are the hosts of the gold mineralization in the region. These veins have been mined by orpaillors for more than two decades. The northern sector of Komborodougou is in the NNE continuity of the gold mineralization highlighted by the mining company Mako Gold Sarl on its Gogbala and Tchaga prospects, Napie project.展开更多
[Objective] This study aimed to identify possible quantitative trait loci (QTL) for vegetative drought tolerance traits of rice (Oryza sativa L.). [Method] A total of 184 rice genotypes were field screened and 156 SSR...[Objective] This study aimed to identify possible quantitative trait loci (QTL) for vegetative drought tolerance traits of rice (Oryza sativa L.). [Method] A total of 184 rice genotypes were field screened and 156 SSR markers randomly distributed at each 3 Mb bin were used through genome-wide scanning method and association analysis to detect QTLs for vegetative drought tolerance traits leaf rolling (LER), leaf drying (LED) and drought recovery rate (DRR). [Result] The experimental rice genotypes showed varied response under vegetative drought, LER, LED and DRR were highly correlated. Population structure was detected at K=3 and K=7, certain extent of admixture existed in the experimental rice genotypes, relative kinship of the rice genotypes ranged from 0 to 0.924 5. Significant linkage disequilibrium among SSR markers was detected. Sixteen SSR markers have been detected to be associated with vegetative drought tolerance traits, four for LER, eight for LED and four for DDR. Most of the markers were associated with more than one trait, indicating a single mechanism might involve in expression of several related traits, i.e. osmotic adjustment. RM107 (Chr.9) was associated with all the three traits and fell exactly within or closely nearby to previous reported regions, was a major QTL for vegetative drought tolerance, RM477 (Chr.8) was significantly associated with DRR and extremely significantly associated with LER was probably another major QTL for vegetative drought tolerance. [Conclusion] Association mapping is a very effective method for describing complex traits like drought tolerance.展开更多
基金supported by the National Natural Science Foundation of China(U21A20427,82103826,and 92374112)Research Program of Westlake Laboratory of Life Sciences and Biomedicine(202208012).
文摘The emergence of high-throughput techniques for proteomics measurement has led to an increasing number of proteogenomic studies that aim to reveal protein quantitative trait loci(pQTL)based on large cohorts(Suhre et al.,2017;Sun et al.,2018;Yao et al.,2018;Folkersen et al.,2020;Ferkingstad et al.,2021;Pietzner et al.,2021).
基金supported by the Natural ScienceFoundation of Jiangsu Province of China (Grant No.SBK2010294)an Open Project Program of Jiangsu Key Laboratory of the Ministry of Education for Plant Functional Genomics (Grant No. K10001)
文摘Leaf-color mutations are a widely-observed class of mutations, playing an important role in the study of chlorophyll biosynthesis and plant chloroplast structure, function, genetics and development. A naturally-occurring leaf-color rice mutant, Baihuaidao 7, was analyzed. Mutant plants typically exhibited a green-white-green leaf-color progression, but this phenotype was only expressed in the presence of a stress signal induced by mechanical scarification such as transplantation. Prior to the appearance of white ~eaves, mutant plant growth, leaf color, chlorophyll content, and chloroplast ultrastructure appeared to be identical to those of the wild type. After the changeover to white leaf color, an examination of the mutated leaves revealed a decrease in total chlorophyll, chlorophyll a, chlorophyll b, and carotenoid content, a reduction in the number of chloroplast grana lamella and grana, and a gradual degradation of the thylakoid lamellas. At maturity, the mutant plant was etiolated and dwarfed compared with wild-type plants. Genetic analysis indicated that the leaf mutant character is controlled by a recessive nuclear gene. Genetic mapping of the mutant gene was performed using an F2 population derived from a Baihuaidao 7 ~ Jiangxi 1587 cross. The mutant gene was mapped to rice chromosome 11, positioned between InDel markers L59.2-7 and L64.8-11, which are separated by approximately 740.5 kb. The mutant gene is believed to be a new leaf-color mutant gene in rice, and is tentatively designated as gwgl.
基金supported by the National Natural Science Foundation of China,No.81471308(to JL)the Stem Cell Clinical Research Project in China,No.CMR-20161129-1003(to JL)the Innovation Technology Funding of Dalian in China,No.2018J11CY025(to JL)
文摘Neural stem cells,which are capable of multi-potential differentiation and self-renewal,have recently been shown to have clinical potential for repairing central nervous system tissue damage.However,the theme trends and knowledge structures for human neural stem cells have not yet been studied bibliometrically.In this study,we retrieved 2742 articles from the PubMed database from 2013 to 2018 using "Neural Stem Cells" as the retrieval word.Co-word analysis was conducted to statistically quantify the characteristics and popular themes of human neural stem cell-related studies.Bibliographic data matrices were generated with the Bibliographic Item Co-Occurrence Matrix Builder.We identified 78 high-frequency Medical Subject Heading(MeSH)terms.A visual matrix was built with the repeated bisection method in gCLUTO software.A social network analysis network was generated with Ucinet 6.0 software and GraphPad Prism 5 software.The analyses demonstrated that in the 6-year period,hot topics were clustered into five categories.As suggested by the constructed strategic diagram,studies related to cytology and physiology were well-developed,whereas those related to neural stem cell applications,tissue engineering,metabolism and cell signaling,and neural stem cell pathology and virology remained immature.Neural stem cell therapy for stroke and Parkinson’s disease,the genetics of microRNAs and brain neoplasms,as well as neuroprotective agents,Zika virus,Notch receptor,neural crest and embryonic stem cells were identified as emerging hot spots.These undeveloped themes and popular topics are potential points of focus for new studies on human neural stem cells.
基金by the National Natural Science Foundation of China(No.51673016)the Beijing Advanced Innovation Center for Soft matter Science and Engineering.
文摘It is a challenge to identify each phase in a multi-component polymer system and uniquely determine the interfacial properties between the different phases.Using atomic force microscopy nanomechanical mapping(AFM-NM)and AFM-based infrared spectroscopy(AFM-IR),we identify each phase,visualize structural developments,and determine the interfacial properties in a blend of three polymers:high-density polyethylene(HDPE),polyamide(PA6)and poly(styrene-b-ethylene-co-butylene-b-styrene)(SEBS).Each phase can be identified from the Young’s modulus,along with the structural development within the phases before and after compatibilization.The interfacial widths between HDPE/PA6,HDPE/SEBS and SEBS/PA6 were determined independently in one measurement from a Young’s modulus map.The structural,mechanical property development and identity of the phases were determined by AFM-NM,while AFM-IR,providing complementary chemical information,identified interfacial reactions,showed the chemical affinity of a compatibilizer with the component phases,and mapped the distribution of the compatibilizer in the ternary polymer blends.The chemical,structural and interfacial information obtained by these measurements provide information that is essential for producing mechanically robust materials from incompatible mixtures of polymers.
基金This project is supported by National Natural Science Foundation ofChina(No.l9832020) and National Outstanding Youth Science Foundation ofChina(No.10125208).
文摘A physical value mapping （PVM） algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from the mesh of the product to the mesh of the stamped part will be adopted. At the same time, the search process is divided into two steps： entire search （ES） and local search （LS）, which improve the searching efficiency. The searching area is enlarged to avoid missing projection elements in ES process. An arc-length method is introduced in LS process. The validity is confirmed by the results of the complex industry-forming product.
基金covered by the Swiss National Centre of Competence in Research North-South (NCCR North-South) program
文摘An efficient and reliable automated model that can map physical Soil and Water Conservation（SWC） structures on cultivated land was developed using very high spatial resolution imagery obtained from Google Earth and Arc GIS？ERDAS IMAGINE？and SDC Morphology Toolbox for MATLAB and statistical techniques. The model was developed using the following procedures：（1） a high-pass spatial filter algorithm was applied to detect linear features,（2） morphological processing was used to remove unwanted linear features,（3） the raster format was vectorized,（4） the vectorized linear features were split per hectare（ha） and each line was then classified according to its compass directionand（5） the sum of all vector lengths per class of direction per ha was calculated. Finallythe direction class with the greatest length was selected from each ha to predict the physical SWC structures. The model was calibrated and validated on the Ethiopian Highlands. The model correctly mapped 80% of the existing structures. The developed model was then tested at different sites with different topography. The results show that the developed model is feasible for automated mapping of physical SWC structures. Thereforethe model is useful for predicting and mapping physical SWC structures areas across diverse areas.
基金National Natural Science Foundation of China(Grant Nos.51201015 and U1532262).
文摘Five-fold twinned nanostructures are intrinsically strained or relaxed by extended defects to satisfy the space-filling requirement.Although both of metallic and semiconductor five-fold twinned nanostructures show inhomogeneity in their cross-sectional strain distribution,the evident strain concentration at twin boundaries in the semiconductor systems has been found in contrast to the metallic systems.Naturally,a problem is raised how the chemical bonding characteristics of various five-fold twinned nanosystems affects their strain-relieving defect structures.Here using three-dimensional(3D)electron diffraction mapping methodology,the intrinsic strain and the strain-relieving defects in a pentagonal Ag nanowire and a star-shaped boron carbide nanowire,both of them have basically equal radial twin-plane width about 30 nm,are nondestructively characterized.The non-uniform strain and defect distribution between the five single crystalline segments are found in both of the five-fold twinned nanowires.Diffraction intensity fine structure analysis for the boron carbide five-fold twinned nanowire indicates the presence of high-density of planar defects which are responsible for the accommodation of the intrinsic angular excess.However,for the Ag five-fold twinned nanowire,the star-disclination strain field is still present,although is partially relieved by the formation of localized stacking fault layers accompanied by partial dislocations.Energetic analysis suggests that the variety in the strain-relaxation ways for the two types of five-fold twinned nanowires could be ascribed to the large difference in shear modulus between the soft noble metal Ag and the superhard covalent compound boron carbide.
基金National Hi-tech Research and Development Program of China(863 Program,Grant No.2015BAF04B00)China Aerospace Science and Technology Corporation Program of China(CASIC Program,Grant No.461717)
文摘In order to solve the problem of substantial computational resources of lattice structure during optimization, a local relative density mapping(LRDM) method is proposed. The proposed method uses solid isotropic microstructures with penalization to optimize a model at the macroscopic scale. The local relative density information is obtained from the topology optimization result. The contour lines of an optimized model are extracted using a density contour approach, and the triangular mesh is generated using a mesh generator. A local mapping relationship between the elements’ relative density and the struts’ relative cross?sectional area is established to automatically determine the diameter of each individual strut in the lattice structures. The proposed LRDM method can be applied to local finite element meshes and local density elements, but it is also suitable for global ones. In addition, some cases are con?sidered in order to test the e ectiveness of the LRDM method. The results show that the solution time of the LRDM is lower than the RDM method by approximately 50%. The proposed method provides instructions for the design of more complex lattice structures.
基金the Joint Funds of the National Natural Science Foundation of China(Grant No.U1834202).
文摘Time-varying stiffness is one of the most important dynamic characteristics of rolling element bearings.The method of analyzing the elements in the bearing stiffness matrix is usually adopted to investigate the characteristics of bearing stiffness.Linear mapping structure of the bearing stiffness matrix is helpful to understand the varying compliance excitation and its influence on vibration transmission.In this study,a method to analyze the mapping structure of bearing stiffness matrix is proposed based on the singular value decomposition of block matrices in the stiffness matrix.Not only does this method have the advantages of coordinate transformation independence and unit independence,but also the analysis procedure involved is geometrically intuitive.The time-varying stiffness matrix of double-row tapered bearing is calculated and analyzed using the proposed method under two representative load cases.The principal stiffnesses and principal axes defined in the method together indicate the dominant and insignificant stiffness properties with the corresponding directions,and the vibration transmission properties are also revealed.Besides,the coupling behaviors between different shaft motions are found during the analysis of mapping structure.The mechanism of the generation of varying compliance excitation is also revealed.
文摘The cell mechanical features are largely regulated by actin cytokeleton. By analyzing the mechanical features, it is possible to evaluate the characteristics of the complicated actin cytoskeleton in diverse cell types. In this study, we examined the sub-membrane mechanical structures of normal fibroblasts TIG-1 cells, and cervical cancer Hela cells using local elasticity mapping method of atomic force microscope. Especially we aimed at clarifying the regulatory mechanisms of sub-membrane actin structures in these cells by activation of actomyosin formation using calyculin A. This technique revealed that TIG-1 and Hela cells bore clearly different sub-membrane mechanical structures. TIG-1 cells had aligned stiff filamentous structures, whereas Hela cells had crooked and relatively soft filaments. The surface stiffness of TIG-1 cells increased slightly by actomyosin formation due to stiffness increase of the aligned filamentous structures. On the other hand, the surface stiffness of Hela cells increased by actomyosin formation due to upregulation of the apical actin filaments. Therefore, the structural and regulatory differences of the apical actin filaments could be demonstrated by atomic force microscopy elasticity mapping analysis.
基金the National Natural Science Foundation of China(No.51175284)
文摘Equipment has dual nature: physical objects existing in nature, and artificial objects designed by human. The decision on the configuration and structural parameters of equipment is made by engineers based on technical-physical effects which control the behavioral parameters of the equipment. Sensors are mounted on the equipment to monitor the equipment state. Current methods for state monitoring and diagnosis mostly use mathematics and artificial intelligence technology to construct evaluation methods. This paper presents an integrated design and state maintenance method, in which graph and dual graph are used for recording design data and sensor arrangement and for mapping method from signals to substructures and connection pairs. An example of state maintenance of hydro power generating equipment is illustrated.
基金Project(2014CB239205)supported by the National Basic Research Program of ChinaProject(20011ZX05030-005-003)supported by the National Science and Technology Major Project of China
文摘Faults and fractures of multiple scales are frequently induced and generated in compressional structural system. Comprehensive identification of these potential faults and fractures that cannot be distinguished directly from seismic profile of the complex structures is still an unanswered problem. Based on the compressional structural geometry and kinematics theories as well as the structural interpretation from seismic data, a set of techniques is established for the identification of potential faults and fractures in compressional structures. Firstly, three-dimensional(3D) patterns and characteristics of the faults directly interpreted from seismic profile were illustrated by 3D structural model. Then, the unfolding index maps, the principal structural curvature maps, and tectonic stress field maps were obtained from structural restoration. Moreover, potential faults and fractures in compressional structures were quantitatively identified relying on comprehensive analysis of these three maps. Successful identification of the potential faults and fractures in Mishrif limestone formation and in Asmari dolomite formation of Buzurgan anticline in Iraq demonstrates the applicability and reliability of these techniques.
文摘The present study focuses on the analysis and description of lineaments interpreted as secondary structures to describe the nature of Senegalo Malian Discontinuity. These lineaments cross-cut the large north-south oriented transcurrent lithospheric structure known as the Senegalo Malian Discontinuity (SMD). Two lineaments were selected oriented NNE (N15˚ to N25˚), one at Dialafara and one at Sadiola. Four profiles on each lineament of these 2 zones, so that there were 2 on each side of the SMD. The ground data collected were processed using proper parameter and software. Some filters were applied to enhance the signal level. These ground data were later compared to the existing airborne magnetic data for consistency and accuracy using the upward continuation filter. The results show that the quality of ground data is good. In addition, the ground magnetic data show the presence of certain local anomalies that are not visible in the regional data. The analytical signal was also used to determine domain boundaries or possible contact zones. The contact zone can be highlighted on certain profiles such as L300 and L600. The study showed that the west and east sides of the SMD are not the same. Secondary structures become wide when approaching the SMD on both sides. They are also duplicated to the east of the SMD when we move progressively away. In the Dialafara area, the ground magnetic data intersect an interpreted fold. The results of this work confirm the presence of the secondary structures and their evolution in relation to the SMD. The relationships between the secondary structures in the Dailafara and Sadiola zones and their relations with the SMD are highlighted. The technique used in this study, is an important approach to better description and interpreting of regional structures using the secondary structures and proposing a structural model.
基金National Key Research and Development Program(No.2018YFB1305001)Major Consulting and Research Project of Chinese Academy of Engineering(No.2018-ZD-02-07)。
文摘Taking autonomous driving and driverless as the research object,we discuss and define intelligent high-precision map.Intelligent high-precision map is considered as a key link of future travel,a carrier of real-time perception of traffic resources in the entire space-time range,and the criterion for the operation and control of the whole process of the vehicle.As a new form of map,it has distinctive features in terms of cartography theory and application requirements compared with traditional navigation electronic maps.Thus,it is necessary to analyze and discuss its key features and problems to promote the development of research and application of intelligent high-precision map.Accordingly,we propose an information transmission model based on the cartography theory and combine the wheeled robot’s control flow in practical application.Next,we put forward the data logic structure of intelligent high-precision map,and analyze its application in autonomous driving.Then,we summarize the computing mode of“Crowdsourcing+Edge-Cloud Collaborative Computing”,and carry out key technical analysis on how to improve the quality of crowdsourced data.We also analyze the effective application scenarios of intelligent high-precision map in the future.Finally,we present some thoughts and suggestions for the future development of this field.
基金Chongqing Engineering Institute 2023 First-Class Course Construction Project“Online and Offline Hybrid Course:Engineering Costing Software Application”(KC20230116)。
文摘Relying on the talent cultivation program of Chongqing Institute of Engineering,this paper combines the characteristics of the Engineering Costing Software Application course with its current status quo,analyzes the existing problems and teaching pain points,and introduces knowledge mapping.The course construction is carried out in terms of the combing of knowledge points,the optimization of the course structure,the innovation of the teaching method,and the evaluation and feedback of the teaching in order to improve the systematicity and structural nature of the teaching content,enhance students’learning experience,and enhance their learning effect.It is conducive to the formation of students’knowledge systems and provides a basis for discussion and reference for improving the quality of teaching and cultivating application-oriented talents who meet the market demand.
文摘The first important problem in the star forming process is the formation of proto star core in star forming regions of molecular cloud. The multi core structure in star forming regions is related to the forming of proto star core. The molecular radiation of C 18 O( J = 1-0) in Cepheus C has been observed. The C 18 O( J = 1-0) observations form the basis for an interesting study on the cloud cores and star formation activity in the cores of the Cepheus C. In order to study the multi core structure of C 18 O( J = 1-0) in the Cepheus C the channel maps and the position velocity diagrams of C 18 O( J = 1-0) will be shown. From the maps it is found that the contour level and distribution size of the three cores in Cepheus C are related to the channel velocity very much. The channel velocity of C 18 O( J = 1-0) molecules in core b, which distributed in all the channels velocity, is different with one in core a and core c very much. The C 18 O( J = 1-0) molecules in core a and core c of the Cepheus C mostly distributed in the blue shifted channel velocity relating to peak velocity, and only in -10.0 ～ -9.5 km/s, which is the red shifted channel velocity relating to peak velocity. And the contour level of C 18 O( J = 1-0) in -10.0 ～ -9.5 km/s is small and the distrbution size in the channel map is small. According to the position velocity diagrams the asymmetry of the distribution both blue shifted and red shifted components should reflect the asymmetry of the profile. From the diagrams it also is found that the contour level and the distribution size of the three cores are different from each other. Both results from the maps and diagrams are coincident with each other.
文摘Fig.1.The GenomeSyn tool for visualizing genome synteny and characterizing structural variations.A:The first synteny visualization map showed the detailed information of two or three genomes and can display structural variations and other annotation information.B:The second type of visualization map was simple and only showed the synteny relationship between the chromosomes of two or three genomes.C:Multiplatform general GenomeSyn submission page,applicable to Windows,MAC and web platforms;other analysis files can be entered in the"other"option.The publisher would like to apologise for any inconvenience caused.
基金support of the School of Engineering,Lancaster University,UK,for the Engineering Department Studentship as well as the Engineering and Physical Sciences Research Council(EPSRC)’s Doctoral Training Centre(DTC)。
文摘With the increasing exploration of oil and gas into deep waters,the necessity for material development increases for lighter conduits such as composite marine risers,in the oil and gas industry.To understand the research knowledge on this novel area,there is a need to have a bibliometric analysis on composite marine risers.A research methodology was developed whereby the data retrieval was from SCOPUS database from 1977–2023.Then,VOSviewer was used to visualize the knowledge maps.This study focuses on the progress made by conducting knowledge mapping and scientometric review on composite marine risers.This scientometric analysis on the subject shows current advances,geographical activities by countries,authorship records,collaborations,funders,affiiliations,co‑occurrences,and future research areas.It was observed that the research trends recorded the highest publication volume in the U.S.A.,but less cluster affiiliated,as it was followed by countries like the U.K.,China,Nigeria,Australia and Singapore.Also,thisfiield has more conference papers than journal papers due to the challenge of adaptability,acceptance,qualifiication,and application of composite marine risers in the marine industry.Hence,there is a need for more collaborations on composite marine risers and more funding to enhance the research trend.
文摘The Gold District of Korhogo, in the northern region of C?te d’Ivoire, holds enormous potential for gold mineralizations, some of which are under exploration phase and others in exploitation phase (example of Tongon Gold Mine). Dormant since 1998, Mapping Services of most of the West African countries hardly provide geological maps at the scales of: 1/200,000, 1/50,000 and 1/25,000. This situation of unavailability of detailed geological maps does not help mining operators in the selection of prolific areas and also in the interpretation of in soil geochem anomies or gold mineralizations. Consequently, during the years 2020 and 2021, we have undertaken a campaign of geological mapping and petro-structural study of the northern sector of Komborodougou, located in the southern extension of Banfora Birimian Belt. This work, which allowed the realization of a geological map at 1/20,000 scale, reveals that: the mapped area includes three (3) major lithological units: 1) a volcano-sedimentary unit made up of metasediments (metaarenites, metasiltites and metaflyschs) and metavolcanites (metabasalts), which are metamorphosed and outcrop in the form of schists;2) a metaplutonic and intrusive unit composed on the one hand of quartz-diorites and metagabbros, and on the other hand of granites and granodiorites;3) and finally, a unit of dikes formed by microgranites, microgabbros, aplites and quartzites. The volcano-sedimentary complex is affected by a regional fold with an axis subparallel to the regional tectonic grain and an S1 schistosity oriented NE-SW to NNE-SSW with steep dips (>60o), except for those of the metaflyschs which are weak (o);a regional NW-SE compression would be at the origin of the setting of this schistosity. The volcano-sediment and metaplutonite complex is crossed in a NNE-SSW direction by a senetral shear-zone or main shear-zone and secondary shear-zones oriented sometimes NE-SW or N-S. These shear-zones are intersected by more or less dextral or senestral strike-slip faults of NW-SE and E-W trends. N-S to NNE-SSW (N0o - N20o) and NW-SE (N130o - N160o) vein systems associated with the various shear-zones are the hosts of the gold mineralization in the region. These veins have been mined by orpaillors for more than two decades. The northern sector of Komborodougou is in the NNE continuity of the gold mineralization highlighted by the mining company Mako Gold Sarl on its Gogbala and Tchaga prospects, Napie project.
文摘[Objective] This study aimed to identify possible quantitative trait loci (QTL) for vegetative drought tolerance traits of rice (Oryza sativa L.). [Method] A total of 184 rice genotypes were field screened and 156 SSR markers randomly distributed at each 3 Mb bin were used through genome-wide scanning method and association analysis to detect QTLs for vegetative drought tolerance traits leaf rolling (LER), leaf drying (LED) and drought recovery rate (DRR). [Result] The experimental rice genotypes showed varied response under vegetative drought, LER, LED and DRR were highly correlated. Population structure was detected at K=3 and K=7, certain extent of admixture existed in the experimental rice genotypes, relative kinship of the rice genotypes ranged from 0 to 0.924 5. Significant linkage disequilibrium among SSR markers was detected. Sixteen SSR markers have been detected to be associated with vegetative drought tolerance traits, four for LER, eight for LED and four for DDR. Most of the markers were associated with more than one trait, indicating a single mechanism might involve in expression of several related traits, i.e. osmotic adjustment. RM107 (Chr.9) was associated with all the three traits and fell exactly within or closely nearby to previous reported regions, was a major QTL for vegetative drought tolerance, RM477 (Chr.8) was significantly associated with DRR and extremely significantly associated with LER was probably another major QTL for vegetative drought tolerance. [Conclusion] Association mapping is a very effective method for describing complex traits like drought tolerance.
