To clarify the main enrichment-controlling factors and accumulation mechanisms of shale gas in the Permian Dalong Formation within the Western Hubei-Eastern Chongqing complex structural zone,this study systematically ...To clarify the main enrichment-controlling factors and accumulation mechanisms of shale gas in the Permian Dalong Formation within the Western Hubei-Eastern Chongqing complex structural zone,this study systematically reveals the enrichment patterns and accumulation model through analysis of typical drilling data,geochemical testing,scanning electron microscopy(SEM),methane isothermal adsorption experiments,numerical simulations,and research on tectonic evolution and preservation condition.The results are obtained in two aspects.First,the enrichment of shale gas in the Dalong Formation is synergistically controlled by four factors,i.e.rift troughs controlling shale development,provenance controlling reservoir heterogeneity,temperature and pressure controlling gas occurrence,and structure controlling differential enrichment.The geometry and scale of rift troughs(Chengkou-Western Hubei,and Kaijiang-Liangping)determine the development of organic-rich shale(average TOC>6%,thickness of 15-50 m).Multi-source materials lead to strong heterogeneity of the reservoir,with endogenous minerals as the main component(accounting for 74.31%),and the pores mainly organic matter pores(micropores and mesopores accounting for 93.4%).The formation temperature and pressure control the occurrence state of shale gas,with adsorbed gas(higher than 50%)dominantly in 500-2750 m depth,while free gas(higher than 50%)prevailing at depth deeper than 2750 m depth.The uplift,erosion,and fault systems associated with the Yanshanian tectonic activity result in differential enrichment of shale gas,with three structural styles—broad gentle anticlines,residual synclines,and low gentle slopes—exhibiting relatively high shale gas enrichment.Second,the self-sealing mechanism of medium-shallow shale gas in the Western Hubei-Eastern Chongqing complex structural zone is revealed.Specifically,the Dalong Formation shale aquifer forms a lateral seal for shale gas in the downdip direction via water films and capillary forces,and it combines with the overlying Daye Formation limestone and underlying Xiayao Formation tight layers to establish a synclinal/monoclinal self-sealing accumulation model.The geological insights,such as“four-factor synergistic control”and self-sealing accumulation model,provide a dynamic coupling evaluation framework for shale gas in complex structural zones,promoting the transition of shale gas exploration and evaluation from static descriptions to integrated reservoir-tectonic-fluid analysis.展开更多
Free economic zone (FEZ) has a long history and plays a more and more important role in the world economy. Most studies, however, focused on the theoretical analysis of benefit and cost as well as the economic role of...Free economic zone (FEZ) has a long history and plays a more and more important role in the world economy. Most studies, however, focused on the theoretical analysis of benefit and cost as well as the economic role of FEZ in the less developed countries and little attention has been paid to the evolution of FEZ. This paper will improve the above-mentioned studies and put forward the structural and spatial evolutionary model of FEZ by analyzing the development of objectives, preferential policy, governance structure, industrial sectors and location of FEZs based on the international economic and political development. FEZs develop towards: 1) more comprehensive and macro objectives, 2) more industry-oriented and multi-preferential policies, 3) more cross-national and combination zones with administrative areas, 4) more technology-intensive and multi-industries, 5) more flexible location and larger spatial dimensions, 6) more rapid evolution and typologies, and 7) more economic integration to the host economy.展开更多
Based on the outcrop survey,3D seismic data interpretation,drilling data analysis,the structural patterns and distribution of fault damage zones in carbonate strata of Tazhong Paleo-uplift were established to reveal t...Based on the outcrop survey,3D seismic data interpretation,drilling data analysis,the structural patterns and distribution of fault damage zones in carbonate strata of Tazhong Paleo-uplift were established to reveal the oil and gas enrichment law in the fault damage zones.The following findings were reached:(1)Through the filed survey,the fault damage zone system consists of fault core,damage zone with branch fault and fracture network.Affected by the active nature of the major faults,the fault damage zones differ in planar pattern and scale along the major faults.(2)3D seismic profiles reveal that there are three types of fault damage zones in carbonate strata in Tazhong paleo-uplift,strike-slip fault damage zones,thrust fault damage zones and superimposed fault damage zones.Featuring3 flowers and 3 root belts in vertical,the strike-slip fault damage zone can be subdivided into linear type,oblique type,feather type and horsetail type in plane.Thrust fault damage zones can be further divided into fault anticline type,anticline type and slope type.As the superimposition result of the above two kinds of fault damage zones,superimposed fault damage zones appear in three patterns,intersect type,encompassment type and penetrating type.(3)Cores from wells and geochemical data show oil and gas may migrate along the major fault and laterally.The feather type in strike-slip fault system,fault anticline type in thrust fault damage zone and intersect type in superimposed fault damage zone are possible sites for high production and efficiency wells.展开更多
The paleo-temperature evolution of Sinian reservoir of Anping （安平） 1 well was rebuilt by taking the method of apatite fission track and Easy%Ro model. The result of apatite fission track determines the accurate bu...The paleo-temperature evolution of Sinian reservoir of Anping （安平） 1 well was rebuilt by taking the method of apatite fission track and Easy%Ro model. The result of apatite fission track determines the accurate burial history and overcomes the flaw that the vitrinite reflectance is taken as paleo-temperature indicator simply. The authors used the laser Raman technique to analyze the methane present in the calcite and quartz fluid inclusions of Sinian reservoir, finding that the methane is water soluble gas. The authors also simulated the paleo-pressure of fluid inclusion by using PVTsim software and finally worked out the methane solubility in water.展开更多
In order to determine the area for oil and gas exploration in China’s north Sichuan basin,we have divided the time during which the Longmenshan foreland basin was formed into five periods,based on the sedimentary res...In order to determine the area for oil and gas exploration in China’s north Sichuan basin,we have divided the time during which the Longmenshan foreland basin was formed into five periods,based on the sedimentary response relationship of the foreland basin to structural evolution: 1) a late Triassic Noric period;2) an early-Middle Jurassic period;3) a late Jurassic to early Cretaceous period;4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well,we analyzed the sedimentary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area,making it a major region for future oil and gas exploration in China’s northern Sichuan basin.展开更多
Focused on the lost circulation control in deep naturally fractured reservoirs, the multiscale structure of fracture plugging zone is proposed based on the theory of granular matter mechanics, and the structural failu...Focused on the lost circulation control in deep naturally fractured reservoirs, the multiscale structure of fracture plugging zone is proposed based on the theory of granular matter mechanics, and the structural failure pattern of plugging zone is developed to reveal the plugging zone failure mechanisms in deep, high temperature, high pressure, and high in-situ stress environment. Based on the fracture plugging zone strength model, key performance parameters are determined for the optimal selection of loss control material(LCM). Laboratory fracture plugging experiments with new LCM are carried out to evaluate the effect of the key performance parameters of LCM on fracture plugging quality. LCM selection strategy for fractured reservoirs is developed. The results show that the force chain formed by LCMs determines the pressure stabilization of macro-scale fracture plugging zone. Friction failure and shear failure are the two major failure patterns of fracture plugging zone. The strength of force chain depends on the performance of micro-scale LCM, and the LCM key performance parameters include particle size distribution, fiber aspect ratio, friction coefficient, compressive strength, soluble ability and high temperature resistance. Results of lab experiments and field test show that lost circulation control quality can be effectively improved with the optimal material selection based on the extracted key performance parameters of LCMs.展开更多
A multidisciplinary approach combining multiscale geological-structural analyses(from field to microscale) and clay mineral transformations(clay mineralogy, illite and chlorite "crystallinity" and b cell dim...A multidisciplinary approach combining multiscale geological-structural analyses(from field to microscale) and clay mineral transformations(clay mineralogy, illite and chlorite "crystallinity" and b cell dimension(b_(0)) of K-white mica) was adopted to unravel the tectono-metamorphic evolution of low-and very low-grade tectono-metamorphic units from the Intra-Pontide suture zone in northern Turkey. The mineralogical study allowed to better evaluate the structural stacking outlined during the geological mapping, leading to distinguish three tectono-metamorphic units, two in epizone(Daday and Emirkoy units) and one in anchizone(Cifter Unit) metamorphic conditions. The mesostructural and microstructural analyses suggest a polyphase tectonic-metamorphic evolution. The different macroscopic features observed between the two units characterized by the same epizone metamorphism, can be justified by the evidence that these metamorphic conditions were acquired during the last stages of exhumation in the Daday Unit, while they constrained the metamorphic-peak conditions in the Emirkoy Unit. Contemporary analyses and comparison between structural and mineralogical data have thus proven to be a powerful tool to investigate the low-grade and very low-grade metamorphic environments, allowing at the same time to solve the apparent contradictions deriving from the mineralogical study and to significantly improve the detail of the geological mapping in the field.展开更多
The western segment of the Main Tianshan shear zone(MTSZ)branches into three major dextral strike-slip shear zones in the Borohoro Ranges,northwestern China.Mylonitic rocks within these zones exhibit vertical foliatio...The western segment of the Main Tianshan shear zone(MTSZ)branches into three major dextral strike-slip shear zones in the Borohoro Ranges,northwestern China.Mylonitic rocks within these zones exhibit vertical foliations,subhorizontal lineations,and dextral kinematics.The microstructures and CPO patterns of calcite and quartz in the tectonites suggest shearing at temperatures of 200℃ to 500℃ or above.The amount of dextral displacement along the zones is less than 100 km.LA-ICP-MS U-Pb dating of zircons from some pre-kinematic granites gave ages of 364-325 Ma and 316 Ma,and zircons from a syn-kinematic leucogranite gave an age of 291 Ma.We propose that dextral shearing along the MTSZ started in the earliest Permian.Our data indicate that collision between the Yili and Junggar plates might have finished before 325 Ma or 316 Ma,with a tectonic transformation from 325 Ma to 300 Ma,resulting in intracontinental transpression from 300 Ma or 291 Ma.We suggest that the formation of the Kazakhstan orocline(KO)took place in two stages,with the early stage of bending driven by convergence related to oblique subduction,and the late stage possibly associated with lateral disarticulation as a result of the dextral strike-slip shear zones.展开更多
A coupled CFD-DEM method is used to simulate the formation process of fracture plugging zone.A photo-elastic system characterizing mesoscale force chain network developed by our own is used to model the pressure evolu...A coupled CFD-DEM method is used to simulate the formation process of fracture plugging zone.A photo-elastic system characterizing mesoscale force chain network developed by our own is used to model the pressure evolution in fracture plugging zone to reveal the evolution mechanism of the structure of fracture plugging zone.A theoretical basis is provided for improving the lost circulation control effect in fractured reservoirs and novel methods are proposed for selecting loss control materials and designing loss control formula.CFD-DEM simulation results show that bridging probability is the key factor determining the formation of fracture plugging zone and fracture plugging efficiency.Critical and absolute bridging concentrations are proposed as the key indexes for loss control formula design.With the increase of absolute bridging concentration,the governing factor of bridging is changed from material grain size to the combination of material grain size and friction force.Results of photo-elastic experiments show that mesoscale force chain network is the intrinsic factor affecting the evolution of pressure exerting on the fracture plugging zone and determines the macroscopic strength of fracture plugging zone.Performance parameters of loss control material affect the force chain network structure and the ratio of stronger force chain,and further impact the stability and strength of fracture plugging zone.Based on the study results,the loss control formula is optimized and new-type loss control material is designed.Laboratory experiments results show that the fracture plugging efficiency and strength is effectively improved.展开更多
The Tan-Lu Fault zone (TLFZ) is a significant fractural zone in eastern China and also a seismicity belt in North China. Based on total 4000-km-long shallow penetrated single seismic data with high-resolution, structu...The Tan-Lu Fault zone (TLFZ) is a significant fractural zone in eastern China and also a seismicity belt in North China. Based on total 4000-km-long shallow penetrated single seismic data with high-resolution, structural deformation and fault activity of the TLFZ in the Bohai Sea since the late Pleistocene are discussed in detail. The results show that the TLFZ with a discontinuous distribution and a general NNE-trending consists of 14 active subfaults with an NNE or NE strike in the Bohai Sea. Seismic data reveal that deformation zones along the subfaults in the central Bohai Sea and the Laizhou Bay are wider and more complex than those in the Liaodong Gulf. Related folds and lots of secondary normal faults which are characterized by nearly vertical fault planes and a same or reverse dip construct the fractural zone in the Laizhou Bay and the central Bohai Sea. Usually, micro sym-metrical grabens develop on the top of anticlines. In the Liaodong Gulf, subfault fractural zones usually consist of secondary normal faults with the same inclination or opposite inclination. Ages of seismic sequences and cutting relation between subfaults and seismic sequences suggest that the latest faulting age of the TLFZ is the end of the late Pleistocene in the Liaodong Gulf and the early Holocene in the Laizhou Bay and the central Bohai Sea. There is a good match between distribution of earthquakes and that of the subfaults in the Laizhou Bay and the central Bohai. Statistical result shows that total vertical offset of the TLFZ since the late Pleistocene ranges from 6 to 11 m. On the basis of offsets of the subfaults, the vertical slip rate is calculated and results show that average vertical slip rates in the central Bohai Sea are larger than those in the Liaodong Gulf and the Laizhou Bay. Slip rates more than 0.06 mm/a during 23-10 ka B.P. and 85-65 ka B.P. are larger than those in other stages. The TLFZ was mainly dominated by tensional normal component since the late Pleistocene. Synthesizing shallow deformation, activity and distribution of earthquakes, the TLFZ in the Bohai Sea can be divided into three segments: the Laizhou-Bay segment, the Bozhong segment, and the Liaodong-Gulf segment.展开更多
The structural diversity of different tree-crop associations were studied at Gachabari Sal forest area of Madhupur Garh on Buffer and Peripheral Zone during 2006. The total density, basal area of trees in the Buffer a...The structural diversity of different tree-crop associations were studied at Gachabari Sal forest area of Madhupur Garh on Buffer and Peripheral Zone during 2006. The total density, basal area of trees in the Buffer and Peripheral Zone were 155.5 trees·hm^(-2), 795.4 trees·hm^(-2) and 3.9 m2·hm-2, 5.8 m^2·hm^(-2), respectively. No regeneration and natural trees were found in Peripheral Zone and the Zone is totally occupied by exotic species where the Buffer Zone comprised of both natural and exotic trees. The Peripheral Zone belonged to younger and smaller trees whereas the Buffer Zone belonged to mixture of smaller, taller, younger and mature trees simultaneously. For the practicing of different agroforestry systems both Zones have lost their original characters of Sal forest.展开更多
The original version of this article unfortunately contained three mistakes. （1） The spelling of the [A. Nishad＇] name was incorrect. The corrected spelling is given below.
The Archean North China Craton is composed of the Western Block,Eastern Block and the intervening Central Orogenic Belt.A 4-10 km wide and 85 km long tectonic mélange belt informally called the Zanhuang tectonic
The mylonites occurred in the fracture zones are studied by dynamically recrystallized quartz grains.The natural microstructures in mylonites are simulated and the deformation conditions of mylonitization are estimate...The mylonites occurred in the fracture zones are studied by dynamically recrystallized quartz grains.The natural microstructures in mylonites are simulated and the deformation conditions of mylonitization are estimated by fractal analysis,recrystallized grain size paleopiezometer and flow laws of quartzite.Depending on fractal analysis,the deformation temperature of mylonitization is approximately 600℃,which presents high greenschist facies to low amphibolite facies.The mylonitization occurred at differential stresses of 9.1--10.7MPa(lower limits).Compared with extrapolation of quartzite flow laws and estimates of fractal analysis,the strain rate of mylonitization is under 10-13.8/s.展开更多
The Tan-Lu Fault Zone is a large NNE-trending fault zone that has a substantial effect on the development of eastern China and its earthquake disaster prevention efforts. Aiming at the azimuthally anisotropic structur...The Tan-Lu Fault Zone is a large NNE-trending fault zone that has a substantial effect on the development of eastern China and its earthquake disaster prevention efforts. Aiming at the azimuthally anisotropic structure in the upper crust and seismogenic tectonics in the Hefei segment of this fault, we collected phase velocity dispersion data of fundamental mode Rayleigh waves from ambient noise cross-correlation functions of ~400 temporal seismographs in an area of approximately 80 × 70 km along the fault zone. The period band of the dispersion data was ~0.5–10 s. We inverted for the upper crustal three-dimensional(3-D) shear velocity model with azimuthal anisotropy from the surface to 10 km depth by using a 3-D direct azimuthal anisotropy inversion method. The inversion result shows the spatial distribution characteristics of the tectonic units in the upper crust. Additionally, the deformation of the Tan-Lu Fault Zone and its conjugated fault systems could be inferred from the anisotropy model. In particular, the faults that have remained active from the early and middle Pleistocene control the anisotropic characteristics of the upper crustal structure in this area. The direction of fast axes near the fault zone area in the upper crust is consistent with the strike of the faults, whereas for the region far away from the fault zone, the direction of fast axes is consistent with the direction of the regional principal stress caused by plate movement. Combined with the azimuthal anisotropy models in the deep crust and uppermost mantle from the surface wave and Pn wave, the different anisotropic patterns caused by the Tan-Lu Fault Zone and its conjugated fault system nearby are shown in the upper and lower crust. Furthermore,by using the double-difference method, we relocated the Lujiang earthquake series, which contained 32 earthquakes with a depth shallower than 10 km. Both the Vs model and earthquake relocation results indicate that earthquakes mostly occurred in the vicinity of structural boundaries with fractured media, with high-level development of cracks and small-scale faults jammed between more rigid areas.展开更多
As one of the typical deposits in the Sichuan-Yunnan-Guizhou Pb-Zn metallogenic province,the Daliangzi Pb-Zn deposit has a close genetic relationship with the structural system of the black/fracture zone formed under ...As one of the typical deposits in the Sichuan-Yunnan-Guizhou Pb-Zn metallogenic province,the Daliangzi Pb-Zn deposit has a close genetic relationship with the structural system of the black/fracture zone formed under the action of the NWW-approximately EW strike-slip structures in the metallogenic province.The R1 black/fracture zone has a close relationship with ore forming;however,the mechanism of the rock-and ore-controlling action of the structural system remains unclear.Based on a detailed analysis of the tectonite-mineralized alteration lithofacies of the R1 black/fracture zone,the tectonite-mineralized alteration lithofacies zones can be divided into four types in succession outward from the Pb-Zn mineralization center(F_(5),F_(100),and other faults),i.e.,(1)the brecciated and stockwork-like Pb-Zn mineralization-complex breccia facies zone;(2)the stockwork-like Pb-Zn mineralization-simple breccia and cataclasite facies zone;(3)the veined pyrite-sulfide-dolomitic cataclasite facies zone;(4)the fine-veined calcite-black carbonized dolomite facies zone.With the evolution of the ore-forming fluid,the homogenization temperature decreases from Zone 1 to Zone 4;the salinity increases from Zone 1 to Zone 2 and then it decreases from Zones 3 and 4.The fluid density shows little change overall.The contents of Zn,Pb,Cu,Ga,Ge,Cd,Ag,and other metallogenic elements,Zn/Pb ratio,and CaO/MgO mole ratio decrease gradually from Zone 1 to Zone 4,and the REE fractionation,calcilization,silicification,and pyritization enhance gradually from Zone 1 to Zone 4.This series of changes is the product of diapirism(cryptoexplosion)of strike-slip structures and the black/fracture zone,among which the second-order structures derived from NWW-approximately EW-striking dextral shear-tension faults F_(1)and F_(15)control the brecciated and stockwork-like Pb-Zn mineralized complex breccia facies zones and the stockwork-like Pb-Zn mineralized simple breccia and cataclasite facies zones.Therefore,this paper establishes the zoning mode of tectonite-mineralized alteration lithofacies of the black/fracture zone and proposes that Zones 1 and 2 provide important prospecting criteria.展开更多
The study of natural hybridization facilitates our understanding of potential adaptive mechanisms in evolution and the process involved in speciation.In this study,we used multiple data types,including morphological t...The study of natural hybridization facilitates our understanding of potential adaptive mechanisms in evolution and the process involved in speciation.In this study,we used multiple data types,including morphological traits,ddRAD-seq and ecological niche data,to investigate the differences among Rhododendron×duclouxii hybrid zones and the mechanisms underlying natural hybridization and possible future evolutionary pathways.Our results show that the origins of each hybrid zone are independent,with variations in hybrid formation,structural characteristics,and patterns of genetic components and morphological trait differentiation.There were no significant differences in morphological traits or genetic variation between the F_(1)and F_(2)generations;however,the range of variation of the F_(2)generation was broader than that of the F_(1)generation.The distribution and ecological characteristics of R.×duclouxii did not significantly differ from those of the two parental species,indicating weak ecological niche preferences between the hybrid and parental taxa.These results imply that the hybrid zones of R.×duclouxii are characterized by considerable variability,with the magnitude of hybridization in each case likely influenced by unique combinations of biological and ecological factors specific to each hybrid zone.We predict that R.×duclouxii hybrid zones will persist and give rise to complex hybrid swarms,each potentially leading to different evolutionary outcomes.展开更多
Situated in the southwestern Pacific,the Tonga-Kermadec subduction zone is separated into two parts by the Louisvlle Ridge Seamount Chain(LRSC),i.e.,the Tanga subduction zone and the Kermadec subduction zone.Known for...Situated in the southwestern Pacific,the Tonga-Kermadec subduction zone is separated into two parts by the Louisvlle Ridge Seamount Chain(LRSC),i.e.,the Tanga subduction zone and the Kermadec subduction zone.Known for its vigorous volcanic activity,frequent large earthquakes,rapid plate subduction,and distinctive subducting plate morphology,this subduction zone provides valuable insights into its structures,dynamics,and associated geohazards.This study compiles geological and geophysical datasets in this region,including seismicity,focal mechanisms,seismic reflection and refraction profiles,and seismic tomography,to understand the relationship between lithospheric structures of the subduction system and associated seismicity-volcanic activities.Our analysis suggests that variations in overlying sediment thickness,subduction rate,and subduction angle significantly influence the lithospheric deformation processes within the Tonga-Kermadec subduction system.Furthermore,these factors contribute to the notable differences in seismicity and volcanism observed between the Tonga subduction zone and the Kermadec subduction zone.This study enhances our understanding of plate tectonics by providing insights into the interplay between subduction dynamics and lithospheric deformation,which are crucial for analyzing geological and geophysical behaviors in similar subduction environments.展开更多
The complex Red River fault zone(RRFZ),which is situated in the southwestern region of China and separates the Indochina plate and South China blocks,has diverse seismic activities in different segments.To reveal the ...The complex Red River fault zone(RRFZ),which is situated in the southwestern region of China and separates the Indochina plate and South China blocks,has diverse seismic activities in different segments.To reveal the detailed geometric characteristics of the RRFZ at different sections and to better understand the seismogenic environment,in 2022 and 2023 we deployed 7 seismic dense linear arrays,consisting of 574 nodal stations,across the RRFZ in the northern and southern segments near the towns Midu,Gasa,Zhega,Dazhai,Xinzhai,and Taoyuan.The linear arrays,which extend from 2.4 to 12.5 km in length with station intervals ranging between 40 and140 m,recorded seismic ambient noise for approximately one month.Using the extended range phase shift method,we extract the phase velocity dispersion curves of the Rayleigh waves between 0.9 and 10 Hz,which are then used to invert for the high resolution shearwave velocity structures across the RRFZ beneath the linear arrays.The key findings are:(1)the 7 imaged sections of the RRFZ exhibit quite similar structures,with higher velocities on the SW side and lower velocities on the NE side;the velocity variation is consistent with the surface geological structures along the RRFZ;(2)the shear-wave velocities on the SW side of the RRFZ at the northern Midu section and southern Gasa-Dazhai sections are generally higher than their counterparts in the southern Xinzhai-Taoyuan sections,which reflects lithological variations from the marble-dominated Paleoproterozoic Along basement to the gneiss dominated Paleoproterozoic Qingshuihe basement;(3)from the northern Midu section to the southern region where the RRFZ intersects with the Xiaojiang Fault,the major faults of the RRFZ exhibit a consistent high-angle,NE-dipping structure;(4)the low shear-wave velocities immediately to the NE of the velocity boundary may indicate a faulted zone due to long-term shearing,where excessive amplifications of ground motions could occur.This study provides new insights into the characteristics of the shallow structures of the RRFZ.展开更多
基金Supported by the National Natural Science Foundation of China(42472210)Project of the China Geological Survey(DD20221653,DD20230043).
文摘To clarify the main enrichment-controlling factors and accumulation mechanisms of shale gas in the Permian Dalong Formation within the Western Hubei-Eastern Chongqing complex structural zone,this study systematically reveals the enrichment patterns and accumulation model through analysis of typical drilling data,geochemical testing,scanning electron microscopy(SEM),methane isothermal adsorption experiments,numerical simulations,and research on tectonic evolution and preservation condition.The results are obtained in two aspects.First,the enrichment of shale gas in the Dalong Formation is synergistically controlled by four factors,i.e.rift troughs controlling shale development,provenance controlling reservoir heterogeneity,temperature and pressure controlling gas occurrence,and structure controlling differential enrichment.The geometry and scale of rift troughs(Chengkou-Western Hubei,and Kaijiang-Liangping)determine the development of organic-rich shale(average TOC>6%,thickness of 15-50 m).Multi-source materials lead to strong heterogeneity of the reservoir,with endogenous minerals as the main component(accounting for 74.31%),and the pores mainly organic matter pores(micropores and mesopores accounting for 93.4%).The formation temperature and pressure control the occurrence state of shale gas,with adsorbed gas(higher than 50%)dominantly in 500-2750 m depth,while free gas(higher than 50%)prevailing at depth deeper than 2750 m depth.The uplift,erosion,and fault systems associated with the Yanshanian tectonic activity result in differential enrichment of shale gas,with three structural styles—broad gentle anticlines,residual synclines,and low gentle slopes—exhibiting relatively high shale gas enrichment.Second,the self-sealing mechanism of medium-shallow shale gas in the Western Hubei-Eastern Chongqing complex structural zone is revealed.Specifically,the Dalong Formation shale aquifer forms a lateral seal for shale gas in the downdip direction via water films and capillary forces,and it combines with the overlying Daye Formation limestone and underlying Xiayao Formation tight layers to establish a synclinal/monoclinal self-sealing accumulation model.The geological insights,such as“four-factor synergistic control”and self-sealing accumulation model,provide a dynamic coupling evaluation framework for shale gas in complex structural zones,promoting the transition of shale gas exploration and evaluation from static descriptions to integrated reservoir-tectonic-fluid analysis.
文摘Free economic zone (FEZ) has a long history and plays a more and more important role in the world economy. Most studies, however, focused on the theoretical analysis of benefit and cost as well as the economic role of FEZ in the less developed countries and little attention has been paid to the evolution of FEZ. This paper will improve the above-mentioned studies and put forward the structural and spatial evolutionary model of FEZ by analyzing the development of objectives, preferential policy, governance structure, industrial sectors and location of FEZs based on the international economic and political development. FEZs develop towards: 1) more comprehensive and macro objectives, 2) more industry-oriented and multi-preferential policies, 3) more cross-national and combination zones with administrative areas, 4) more technology-intensive and multi-industries, 5) more flexible location and larger spatial dimensions, 6) more rapid evolution and typologies, and 7) more economic integration to the host economy.
基金Supported by the China National Science and Technology Major Project(2016ZX05004-004)
文摘Based on the outcrop survey,3D seismic data interpretation,drilling data analysis,the structural patterns and distribution of fault damage zones in carbonate strata of Tazhong Paleo-uplift were established to reveal the oil and gas enrichment law in the fault damage zones.The following findings were reached:(1)Through the filed survey,the fault damage zone system consists of fault core,damage zone with branch fault and fracture network.Affected by the active nature of the major faults,the fault damage zones differ in planar pattern and scale along the major faults.(2)3D seismic profiles reveal that there are three types of fault damage zones in carbonate strata in Tazhong paleo-uplift,strike-slip fault damage zones,thrust fault damage zones and superimposed fault damage zones.Featuring3 flowers and 3 root belts in vertical,the strike-slip fault damage zone can be subdivided into linear type,oblique type,feather type and horsetail type in plane.Thrust fault damage zones can be further divided into fault anticline type,anticline type and slope type.As the superimposition result of the above two kinds of fault damage zones,superimposed fault damage zones appear in three patterns,intersect type,encompassment type and penetrating type.(3)Cores from wells and geochemical data show oil and gas may migrate along the major fault and laterally.The feather type in strike-slip fault system,fault anticline type in thrust fault damage zone and intersect type in superimposed fault damage zone are possible sites for high production and efficiency wells.
基金supported by the National Basic Research Program of China (No. 2005CB422106)
文摘The paleo-temperature evolution of Sinian reservoir of Anping （安平） 1 well was rebuilt by taking the method of apatite fission track and Easy%Ro model. The result of apatite fission track determines the accurate burial history and overcomes the flaw that the vitrinite reflectance is taken as paleo-temperature indicator simply. The authors used the laser Raman technique to analyze the methane present in the calcite and quartz fluid inclusions of Sinian reservoir, finding that the methane is water soluble gas. The authors also simulated the paleo-pressure of fluid inclusion by using PVTsim software and finally worked out the methane solubility in water.
基金Projects 40772198 and 50678182 supported by the National Natural Science Foundation of China09-3-094 by the Research Fund for Teaching Reform in Institutes of Higher Learning,Chongqing, China
文摘In order to determine the area for oil and gas exploration in China’s north Sichuan basin,we have divided the time during which the Longmenshan foreland basin was formed into five periods,based on the sedimentary response relationship of the foreland basin to structural evolution: 1) a late Triassic Noric period;2) an early-Middle Jurassic period;3) a late Jurassic to early Cretaceous period;4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well,we analyzed the sedimentary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area,making it a major region for future oil and gas exploration in China’s northern Sichuan basin.
基金Supported by the National Natural Science Foundation of China(Grant No.51604236)Science and Technology Program of Sichuan Province(Grant No.2018JY0436)the Sichuan Province Youth Science and Technology Innovation Team Project(Grant No.2016TD0016)
文摘Focused on the lost circulation control in deep naturally fractured reservoirs, the multiscale structure of fracture plugging zone is proposed based on the theory of granular matter mechanics, and the structural failure pattern of plugging zone is developed to reveal the plugging zone failure mechanisms in deep, high temperature, high pressure, and high in-situ stress environment. Based on the fracture plugging zone strength model, key performance parameters are determined for the optimal selection of loss control material(LCM). Laboratory fracture plugging experiments with new LCM are carried out to evaluate the effect of the key performance parameters of LCM on fracture plugging quality. LCM selection strategy for fractured reservoirs is developed. The results show that the force chain formed by LCMs determines the pressure stabilization of macro-scale fracture plugging zone. Friction failure and shear failure are the two major failure patterns of fracture plugging zone. The strength of force chain depends on the performance of micro-scale LCM, and the LCM key performance parameters include particle size distribution, fiber aspect ratio, friction coefficient, compressive strength, soluble ability and high temperature resistance. Results of lab experiments and field test show that lost circulation control quality can be effectively improved with the optimal material selection based on the extracted key performance parameters of LCMs.
基金supported by the Universitàdi Pisa (Darius, PRA 2018, PRIN 2008 and PRIN 2010-11 projects) to Michele Marronithe CNR-IGG,Pisa to Alessandro Ellero。
文摘A multidisciplinary approach combining multiscale geological-structural analyses(from field to microscale) and clay mineral transformations(clay mineralogy, illite and chlorite "crystallinity" and b cell dimension(b_(0)) of K-white mica) was adopted to unravel the tectono-metamorphic evolution of low-and very low-grade tectono-metamorphic units from the Intra-Pontide suture zone in northern Turkey. The mineralogical study allowed to better evaluate the structural stacking outlined during the geological mapping, leading to distinguish three tectono-metamorphic units, two in epizone(Daday and Emirkoy units) and one in anchizone(Cifter Unit) metamorphic conditions. The mesostructural and microstructural analyses suggest a polyphase tectonic-metamorphic evolution. The different macroscopic features observed between the two units characterized by the same epizone metamorphism, can be justified by the evidence that these metamorphic conditions were acquired during the last stages of exhumation in the Daday Unit, while they constrained the metamorphic-peak conditions in the Emirkoy Unit. Contemporary analyses and comparison between structural and mineralogical data have thus proven to be a powerful tool to investigate the low-grade and very low-grade metamorphic environments, allowing at the same time to solve the apparent contradictions deriving from the mineralogical study and to significantly improve the detail of the geological mapping in the field.
基金financially supported by the Major Basic Research Project of the Ministry of Science and Technology of China(Grant No.2014CB448000)the National Natural Science Foundation of China(Grant Nos.41772207,41422206)。
文摘The western segment of the Main Tianshan shear zone(MTSZ)branches into three major dextral strike-slip shear zones in the Borohoro Ranges,northwestern China.Mylonitic rocks within these zones exhibit vertical foliations,subhorizontal lineations,and dextral kinematics.The microstructures and CPO patterns of calcite and quartz in the tectonites suggest shearing at temperatures of 200℃ to 500℃ or above.The amount of dextral displacement along the zones is less than 100 km.LA-ICP-MS U-Pb dating of zircons from some pre-kinematic granites gave ages of 364-325 Ma and 316 Ma,and zircons from a syn-kinematic leucogranite gave an age of 291 Ma.We propose that dextral shearing along the MTSZ started in the earliest Permian.Our data indicate that collision between the Yili and Junggar plates might have finished before 325 Ma or 316 Ma,with a tectonic transformation from 325 Ma to 300 Ma,resulting in intracontinental transpression from 300 Ma or 291 Ma.We suggest that the formation of the Kazakhstan orocline(KO)took place in two stages,with the early stage of bending driven by convergence related to oblique subduction,and the late stage possibly associated with lateral disarticulation as a result of the dextral strike-slip shear zones.
基金Supported by the National Natural Science Foundation of China(51604236)Open Fund of the State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation(PLN201913)+1 种基金Science and Technology Planning Project of the Sichuan Province,China(2018JY0436)Sichuan Youth Science and Technology Innovation Research Team Project for Unconventional Oil and Gas Reservoir Protection(2016TD0016)。
文摘A coupled CFD-DEM method is used to simulate the formation process of fracture plugging zone.A photo-elastic system characterizing mesoscale force chain network developed by our own is used to model the pressure evolution in fracture plugging zone to reveal the evolution mechanism of the structure of fracture plugging zone.A theoretical basis is provided for improving the lost circulation control effect in fractured reservoirs and novel methods are proposed for selecting loss control materials and designing loss control formula.CFD-DEM simulation results show that bridging probability is the key factor determining the formation of fracture plugging zone and fracture plugging efficiency.Critical and absolute bridging concentrations are proposed as the key indexes for loss control formula design.With the increase of absolute bridging concentration,the governing factor of bridging is changed from material grain size to the combination of material grain size and friction force.Results of photo-elastic experiments show that mesoscale force chain network is the intrinsic factor affecting the evolution of pressure exerting on the fracture plugging zone and determines the macroscopic strength of fracture plugging zone.Performance parameters of loss control material affect the force chain network structure and the ratio of stronger force chain,and further impact the stability and strength of fracture plugging zone.Based on the study results,the loss control formula is optimized and new-type loss control material is designed.Laboratory experiments results show that the fracture plugging efficiency and strength is effectively improved.
基金supported by the National Natural Science Foundation of China (40606014)the State Level Scientific Research Institutes' Basic R & D Operations Special Fund (2008G12)
文摘The Tan-Lu Fault zone (TLFZ) is a significant fractural zone in eastern China and also a seismicity belt in North China. Based on total 4000-km-long shallow penetrated single seismic data with high-resolution, structural deformation and fault activity of the TLFZ in the Bohai Sea since the late Pleistocene are discussed in detail. The results show that the TLFZ with a discontinuous distribution and a general NNE-trending consists of 14 active subfaults with an NNE or NE strike in the Bohai Sea. Seismic data reveal that deformation zones along the subfaults in the central Bohai Sea and the Laizhou Bay are wider and more complex than those in the Liaodong Gulf. Related folds and lots of secondary normal faults which are characterized by nearly vertical fault planes and a same or reverse dip construct the fractural zone in the Laizhou Bay and the central Bohai Sea. Usually, micro sym-metrical grabens develop on the top of anticlines. In the Liaodong Gulf, subfault fractural zones usually consist of secondary normal faults with the same inclination or opposite inclination. Ages of seismic sequences and cutting relation between subfaults and seismic sequences suggest that the latest faulting age of the TLFZ is the end of the late Pleistocene in the Liaodong Gulf and the early Holocene in the Laizhou Bay and the central Bohai Sea. There is a good match between distribution of earthquakes and that of the subfaults in the Laizhou Bay and the central Bohai. Statistical result shows that total vertical offset of the TLFZ since the late Pleistocene ranges from 6 to 11 m. On the basis of offsets of the subfaults, the vertical slip rate is calculated and results show that average vertical slip rates in the central Bohai Sea are larger than those in the Liaodong Gulf and the Laizhou Bay. Slip rates more than 0.06 mm/a during 23-10 ka B.P. and 85-65 ka B.P. are larger than those in other stages. The TLFZ was mainly dominated by tensional normal component since the late Pleistocene. Synthesizing shallow deformation, activity and distribution of earthquakes, the TLFZ in the Bohai Sea can be divided into three segments: the Laizhou-Bay segment, the Bozhong segment, and the Liaodong-Gulf segment.
文摘The structural diversity of different tree-crop associations were studied at Gachabari Sal forest area of Madhupur Garh on Buffer and Peripheral Zone during 2006. The total density, basal area of trees in the Buffer and Peripheral Zone were 155.5 trees·hm^(-2), 795.4 trees·hm^(-2) and 3.9 m2·hm-2, 5.8 m^2·hm^(-2), respectively. No regeneration and natural trees were found in Peripheral Zone and the Zone is totally occupied by exotic species where the Buffer Zone comprised of both natural and exotic trees. The Peripheral Zone belonged to younger and smaller trees whereas the Buffer Zone belonged to mixture of smaller, taller, younger and mature trees simultaneously. For the practicing of different agroforestry systems both Zones have lost their original characters of Sal forest.
文摘The original version of this article unfortunately contained three mistakes. （1） The spelling of the [A. Nishad＇] name was incorrect. The corrected spelling is given below.
文摘The Archean North China Craton is composed of the Western Block,Eastern Block and the intervening Central Orogenic Belt.A 4-10 km wide and 85 km long tectonic mélange belt informally called the Zanhuang tectonic
基金Supported by Project of the Foundation of China Geological Survey(No.1212010071012)supported by the foundation of China Geological Survey Project(1212010071012)
文摘The mylonites occurred in the fracture zones are studied by dynamically recrystallized quartz grains.The natural microstructures in mylonites are simulated and the deformation conditions of mylonitization are estimated by fractal analysis,recrystallized grain size paleopiezometer and flow laws of quartzite.Depending on fractal analysis,the deformation temperature of mylonitization is approximately 600℃,which presents high greenschist facies to low amphibolite facies.The mylonitization occurred at differential stresses of 9.1--10.7MPa(lower limits).Compared with extrapolation of quartzite flow laws and estimates of fractal analysis,the strain rate of mylonitization is under 10-13.8/s.
基金financially supported by the National Key Research and Development Program of China (2022YFC3005600)the Foundation of the Anhui Educational Commission (2023AH051198)+1 种基金the National Natural Science Foundation of China (42125401 and 42104063)the Joint Open Fund of Mengcheng National Geophysical Observatory (MENGO-202201)。
文摘The Tan-Lu Fault Zone is a large NNE-trending fault zone that has a substantial effect on the development of eastern China and its earthquake disaster prevention efforts. Aiming at the azimuthally anisotropic structure in the upper crust and seismogenic tectonics in the Hefei segment of this fault, we collected phase velocity dispersion data of fundamental mode Rayleigh waves from ambient noise cross-correlation functions of ~400 temporal seismographs in an area of approximately 80 × 70 km along the fault zone. The period band of the dispersion data was ~0.5–10 s. We inverted for the upper crustal three-dimensional(3-D) shear velocity model with azimuthal anisotropy from the surface to 10 km depth by using a 3-D direct azimuthal anisotropy inversion method. The inversion result shows the spatial distribution characteristics of the tectonic units in the upper crust. Additionally, the deformation of the Tan-Lu Fault Zone and its conjugated fault systems could be inferred from the anisotropy model. In particular, the faults that have remained active from the early and middle Pleistocene control the anisotropic characteristics of the upper crustal structure in this area. The direction of fast axes near the fault zone area in the upper crust is consistent with the strike of the faults, whereas for the region far away from the fault zone, the direction of fast axes is consistent with the direction of the regional principal stress caused by plate movement. Combined with the azimuthal anisotropy models in the deep crust and uppermost mantle from the surface wave and Pn wave, the different anisotropic patterns caused by the Tan-Lu Fault Zone and its conjugated fault system nearby are shown in the upper and lower crust. Furthermore,by using the double-difference method, we relocated the Lujiang earthquake series, which contained 32 earthquakes with a depth shallower than 10 km. Both the Vs model and earthquake relocation results indicate that earthquakes mostly occurred in the vicinity of structural boundaries with fractured media, with high-level development of cracks and small-scale faults jammed between more rigid areas.
基金funded by the programs of the National Natural Science Foundation(Nos.42172086,41572060,U1133602)the Program of‘Yunling Scholar’of Yunnan province(2014)+1 种基金the Projects of the Yunnan Engineering Laboratory of Mineral Resources Prediction and Evaluation(YM Lab)(2010)the Innovation Team of Yunnan Province and KMUST(2008,2012).
文摘As one of the typical deposits in the Sichuan-Yunnan-Guizhou Pb-Zn metallogenic province,the Daliangzi Pb-Zn deposit has a close genetic relationship with the structural system of the black/fracture zone formed under the action of the NWW-approximately EW strike-slip structures in the metallogenic province.The R1 black/fracture zone has a close relationship with ore forming;however,the mechanism of the rock-and ore-controlling action of the structural system remains unclear.Based on a detailed analysis of the tectonite-mineralized alteration lithofacies of the R1 black/fracture zone,the tectonite-mineralized alteration lithofacies zones can be divided into four types in succession outward from the Pb-Zn mineralization center(F_(5),F_(100),and other faults),i.e.,(1)the brecciated and stockwork-like Pb-Zn mineralization-complex breccia facies zone;(2)the stockwork-like Pb-Zn mineralization-simple breccia and cataclasite facies zone;(3)the veined pyrite-sulfide-dolomitic cataclasite facies zone;(4)the fine-veined calcite-black carbonized dolomite facies zone.With the evolution of the ore-forming fluid,the homogenization temperature decreases from Zone 1 to Zone 4;the salinity increases from Zone 1 to Zone 2 and then it decreases from Zones 3 and 4.The fluid density shows little change overall.The contents of Zn,Pb,Cu,Ga,Ge,Cd,Ag,and other metallogenic elements,Zn/Pb ratio,and CaO/MgO mole ratio decrease gradually from Zone 1 to Zone 4,and the REE fractionation,calcilization,silicification,and pyritization enhance gradually from Zone 1 to Zone 4.This series of changes is the product of diapirism(cryptoexplosion)of strike-slip structures and the black/fracture zone,among which the second-order structures derived from NWW-approximately EW-striking dextral shear-tension faults F_(1)and F_(15)control the brecciated and stockwork-like Pb-Zn mineralized complex breccia facies zones and the stockwork-like Pb-Zn mineralized simple breccia and cataclasite facies zones.Therefore,this paper establishes the zoning mode of tectonite-mineralized alteration lithofacies of the black/fracture zone and proposes that Zones 1 and 2 provide important prospecting criteria.
基金supported by the National Natural Science Foundation of China,China(32300200,31670213,32160240)Postdoctoral Directional Training Foundation of Yunnan Province,China(E33O31C261)+2 种基金the Key Basic Research Program of Yunnan Province,China(202101BC070003)the CAS President’s International Fellowship Initiative,China(2024PVA0087)supported by the Rural and Environment Science and Analytical Services Division of the Scottish Government,United Kingdom.
文摘The study of natural hybridization facilitates our understanding of potential adaptive mechanisms in evolution and the process involved in speciation.In this study,we used multiple data types,including morphological traits,ddRAD-seq and ecological niche data,to investigate the differences among Rhododendron×duclouxii hybrid zones and the mechanisms underlying natural hybridization and possible future evolutionary pathways.Our results show that the origins of each hybrid zone are independent,with variations in hybrid formation,structural characteristics,and patterns of genetic components and morphological trait differentiation.There were no significant differences in morphological traits or genetic variation between the F_(1)and F_(2)generations;however,the range of variation of the F_(2)generation was broader than that of the F_(1)generation.The distribution and ecological characteristics of R.×duclouxii did not significantly differ from those of the two parental species,indicating weak ecological niche preferences between the hybrid and parental taxa.These results imply that the hybrid zones of R.×duclouxii are characterized by considerable variability,with the magnitude of hybridization in each case likely influenced by unique combinations of biological and ecological factors specific to each hybrid zone.We predict that R.×duclouxii hybrid zones will persist and give rise to complex hybrid swarms,each potentially leading to different evolutionary outcomes.
基金supported by Special Projects in Universities’Key Fields of Guangdong Province(No.2023ZDZX3017)the 2022 Tertiary Education Scientific Research Project of Guangzhou Municipal Education Bureau(No.202234607)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2025A1515012983)the National Natural Science Foundation of China(Nos.52371059 and 52101358).
文摘Situated in the southwestern Pacific,the Tonga-Kermadec subduction zone is separated into two parts by the Louisvlle Ridge Seamount Chain(LRSC),i.e.,the Tanga subduction zone and the Kermadec subduction zone.Known for its vigorous volcanic activity,frequent large earthquakes,rapid plate subduction,and distinctive subducting plate morphology,this subduction zone provides valuable insights into its structures,dynamics,and associated geohazards.This study compiles geological and geophysical datasets in this region,including seismicity,focal mechanisms,seismic reflection and refraction profiles,and seismic tomography,to understand the relationship between lithospheric structures of the subduction system and associated seismicity-volcanic activities.Our analysis suggests that variations in overlying sediment thickness,subduction rate,and subduction angle significantly influence the lithospheric deformation processes within the Tonga-Kermadec subduction system.Furthermore,these factors contribute to the notable differences in seismicity and volcanism observed between the Tonga subduction zone and the Kermadec subduction zone.This study enhances our understanding of plate tectonics by providing insights into the interplay between subduction dynamics and lithospheric deformation,which are crucial for analyzing geological and geophysical behaviors in similar subduction environments.
基金funded by the National Key Research and Development Project of China(Grant No.2021YFC3000600)the China Earthquake Science Experiment Field-Cross-fault Observation Array-Red River Fault Scientific Drilling Project Geophysical Prospecting Site Selection Project+2 种基金Anhui Province Science and Technology Breakthrough Plan Project(Key Project,202423l10050030)the Earthquake Science and Technology Spark Program of the China Earthquake Administration(XH23020YA)the Anhui Mengcheng National Geophysical Observatory Joint Open Fund(MENGO-202307)。
文摘The complex Red River fault zone(RRFZ),which is situated in the southwestern region of China and separates the Indochina plate and South China blocks,has diverse seismic activities in different segments.To reveal the detailed geometric characteristics of the RRFZ at different sections and to better understand the seismogenic environment,in 2022 and 2023 we deployed 7 seismic dense linear arrays,consisting of 574 nodal stations,across the RRFZ in the northern and southern segments near the towns Midu,Gasa,Zhega,Dazhai,Xinzhai,and Taoyuan.The linear arrays,which extend from 2.4 to 12.5 km in length with station intervals ranging between 40 and140 m,recorded seismic ambient noise for approximately one month.Using the extended range phase shift method,we extract the phase velocity dispersion curves of the Rayleigh waves between 0.9 and 10 Hz,which are then used to invert for the high resolution shearwave velocity structures across the RRFZ beneath the linear arrays.The key findings are:(1)the 7 imaged sections of the RRFZ exhibit quite similar structures,with higher velocities on the SW side and lower velocities on the NE side;the velocity variation is consistent with the surface geological structures along the RRFZ;(2)the shear-wave velocities on the SW side of the RRFZ at the northern Midu section and southern Gasa-Dazhai sections are generally higher than their counterparts in the southern Xinzhai-Taoyuan sections,which reflects lithological variations from the marble-dominated Paleoproterozoic Along basement to the gneiss dominated Paleoproterozoic Qingshuihe basement;(3)from the northern Midu section to the southern region where the RRFZ intersects with the Xiaojiang Fault,the major faults of the RRFZ exhibit a consistent high-angle,NE-dipping structure;(4)the low shear-wave velocities immediately to the NE of the velocity boundary may indicate a faulted zone due to long-term shearing,where excessive amplifications of ground motions could occur.This study provides new insights into the characteristics of the shallow structures of the RRFZ.
