Structural damage detection(SDD)remains highly challenging,due to the difficulty in selecting the optimal damage features from a vast amount of information.In this study,a tree model-based method using decision tree a...Structural damage detection(SDD)remains highly challenging,due to the difficulty in selecting the optimal damage features from a vast amount of information.In this study,a tree model-based method using decision tree and random forest was employed for feature selection of vibration response signals in SDD.Signal datasets were obtained by numerical experiments and vibration experiments,respectively.Dataset features extracted using this method were input into a convolutional neural network to determine the location of structural damage.Results indicated a 5%to 10%improvement in detection accuracy compared to using original datasets without feature selection,demonstrating the feasibility of this method.The proposed method,based on tree model and classification,addresses the issue of extracting effective information from numerous vibration response signals in structural health monitoring.展开更多
Monitoring minuscule mechanical signals,both in magnitude and direction,is imperative in many application scenarios,e.g.,structural health monitoring and robotic sensing systems.However,the piezoelectric sensor strugg...Monitoring minuscule mechanical signals,both in magnitude and direction,is imperative in many application scenarios,e.g.,structural health monitoring and robotic sensing systems.However,the piezoelectric sensor struggles to satisfy the requirements for directional recognition due to the limited piezoelectric coefficient matrix,and achieving sensitivity for detecting micrometer-scale deformations is also challenging.Herein,we develop a vector sensor composed of lead zirconate titanate-electronic grade glass fiber composite filaments with oriented arrangement,capable of detecting minute anisotropic deformations.The as-prepared vector sensor can identify the deformation directions even when subjected to an unprecedented nominal strain of 0.06%,thereby enabling its utility in accurately discerning the 5μm-height wrinkles in thin films and in monitoring human pulse waves.The ultra-high sensitivity is attributed to the formation of porous ferroelectret and the efficient load transfer efficiency of continuous lead zirconate titanate phase.Additionally,when integrated with machine learning techniques,the sensor’s capability to recognize multi-signals enables it to differentiate between 10 types of fine textures with 100%accuracy.The structural design in piezoelectric devices enables a more comprehensive perception of mechanical stimuli,offering a novel perspective for enhancing recognition accuracy.展开更多
Multi-source information fusion （MSIF） is imported into structural damage diagnosis methods to improve the validity of damage detection. After the introduction of the basic theory, the function model, classification...Multi-source information fusion （MSIF） is imported into structural damage diagnosis methods to improve the validity of damage detection. After the introduction of the basic theory, the function model, classifications and mathematical methods of MSIF, a structural damage detection method based on MSIF is presented, which is to fuse two or more damage character vectors from different structural damage diagnosis methods on the character-level. In an experiment of concrete plates, modal information is measured and analyzed. The structural damage detection method based on MSIF is taken to localize cracks of concrete plates and it is proved to be effective. Results of damage detection by the method based on MSIF are compared with those from the modal strain energy method and the flexibility method. Damage, which can hardly be detected by using the single damage identification method, can be diagnosed by the damage detection method based on the character-level MSIF technique. Meanwhile multi-location damage can be identified by the method based on MSIF. This method is sensitive to structural damage and different mathematical methods for MSIF have different preconditions and applicabilities for diversified structures. How to choose mathematical methods for MSIF should be discussed in detail in health monitoring systems of actual structures.展开更多
This paper presents a new method using the damage induction vector (DIV) and the best achievable vector (BAV) by which the change of modes due to structural damage can be applied to detcrnlinc the location and scale o...This paper presents a new method using the damage induction vector (DIV) and the best achievable vector (BAV) by which the change of modes due to structural damage can be applied to detcrnlinc the location and scale of damage in structures. By the DIV, undamagc elements can be castly identified and the damage detection can be limited to a few domains of the structure. The structural damage is located by conlputing the Euclidean distance betwcen the DIV and its BAV. The loss of both stiffness and mass properties can be located and quantified.The characteristic of this method is less calculation and there is no limitation of damage scale. Finally, the effectiveness of the method is demonstrated by detecting the damages of the shallow arches.展开更多
Structural damage detection and monitoring are vital in product lifecycle management of aeronautic system in space utilization.In this paper,a method based on vibration characteristics and ensemble learning algorithm ...Structural damage detection and monitoring are vital in product lifecycle management of aeronautic system in space utilization.In this paper,a method based on vibration characteristics and ensemble learning algorithm is proposed to achieve damage detection.Based on the small volume of modal frequency data for intact and damage structures,the extreme gradient boosting algorithm enables robust damage localization under noise condition of wing-like structures on numerical data.The method shows satisfactory performance on localizing damage with random geometrical profiles in most cases.展开更多
Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detecti...Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detection approaches, ranging from traditional heuristic algorithms to machine learning methods, are used to identify these defects. Ensemble learning methods have strengthened the detection of these defects. However, existing approaches do not simultaneously exploit the capabilities of extracting relevant features from pre-trained models and the performance of neural networks for the classification task. Therefore, our goal has been to design a model that combines a pre-trained model to extract relevant features from code excerpts through transfer learning and a bagging method with a base estimator, a dense neural network, for defect classification. To achieve this, we composed multiple samples of the same size with replacements from the imbalanced dataset MLCQ1. For all the samples, we used the CodeT5-small variant to extract features and trained a bagging method with the neural network Roberta Classification Head to classify defects based on these features. We then compared this model to RandomForest, one of the ensemble methods that yields good results. Our experiments showed that the number of base estimators to use for bagging depends on the defect to be detected. Next, we observed that it was not necessary to use a data balancing technique with our model when the imbalance rate was 23%. Finally, for blob detection, RandomForest had a median MCC value of 0.36 compared to 0.12 for our method. However, our method was predominant in Long Method detection with a median MCC value of 0.53 compared to 0.42 for RandomForest. These results suggest that the performance of ensemble methods in detecting structural development defects is dependent on specific defects.展开更多
To address the temperature cross-talk issue in detecting heavy metal ions in natural waters, a highly-integrated and fully fiber-optic metal ion sensing system capable of temperature-concentration decoupling measureme...To address the temperature cross-talk issue in detecting heavy metal ions in natural waters, a highly-integrated and fully fiber-optic metal ion sensing system capable of temperature-concentration decoupling measurement has been designed. This system integrates a fluidic detection structure assisted by side-polished fibers(SPFs) with a Sagnac interferometer.展开更多
Chirality,a common phenomenon in nature,appears in structures ranging from galaxies and condensed matter to atomic nuclei.There is a persistent demand for new,high-precision methods to detect chiral structures,particu...Chirality,a common phenomenon in nature,appears in structures ranging from galaxies and condensed matter to atomic nuclei.There is a persistent demand for new,high-precision methods to detect chiral structures,particularly at the microscale.Here,we propose a novel method,vortex Mössbauer spectroscopy,for probing chiral structures.By leveraging the orbital angular momentum carried by vortex beams,this approach achieves high precision in detecting chiral structures at scales ranging from nanometers to hundreds of nanometers.Our simulation shows the ratio of characteristic lines in the Mössbauer spectra of ^(57)Fe under vortex beams exhibits differences of up to four orders of magnitude for atomic structures with different arrangements.Additionally,simulations reveal the response of ^(229m)Th chiral structures to vortex beams with opposite angular momenta differs by approximately 49-fold.These significant spectral variations indicate that this new vortex Mössbauer probe holds great potential for investigating the microscopic chiral structures and interactions of matter.展开更多
This article studies the application of the alternating current field measurement （ACFM） method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect...This article studies the application of the alternating current field measurement （ACFM） method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.展开更多
For the purpose of structural health monitoring, a damage detection method combined with optimum sensor placement is proposed in this paper. The back sequential sensor placement （BSSP） algorithm is introduced to opt...For the purpose of structural health monitoring, a damage detection method combined with optimum sensor placement is proposed in this paper. The back sequential sensor placement （BSSP） algorithm is introduced to optimize the sensor locations with the aim of maximizing the 2-norm of information matrix, since the EI method is not suitable for optimum sensor placement based on eigenvector sensitivity analysis. Structural damage detection is carried out based on the respective advantages of mode shape and frequency. The optimized incomplete mode shapes yielded from the optimal sensor locations are used to localize structural damage. After the potential damage elements have been preliminarily identified, an iteration scheme is adopted to estimate the damage extent of the potential damage elements based on the changes in the frequency. The effectiveness of this method is demonstrated using a numerical example of a 31-bar truss structure.展开更多
A two-stage damage detection approach is proposed and experimentally demonstrated on a complicated spatial model structure with a limited number of measurements. In the experiment,five known damage patterns,including ...A two-stage damage detection approach is proposed and experimentally demonstrated on a complicated spatial model structure with a limited number of measurements. In the experiment,five known damage patterns,including 3 brace damage cases and 2 joint damage cases,were simulated by removing braces and weakening beam鈥揷olumn connections in the structure. The limited acceleration response data generated by hammer impact were used for system identification,and modal parameters were extracted by using the eigensystem realization algorithm. In the first stage,the possible damaged locations are determined by using the damage index and the characteristics of the analytical model itself,and the extent of damage for those substructures identified at stage I is estimated in the second stage by using a second-order eigen-sensitivity approximation method. The main contribution of this paper is to test the two-stage method by using the real dynamic data of a complicated spatial model structure with limited sensors. The analysis results indicate that the two-stage approach is ableto detect the location of both damage cases,only the severity of brace damage cases can be assessed,and the reasonable analytical model is critical for successful damage detection.展开更多
Structural health monitoring(SHM)is a vast,interdisciplinary research field whose literature spans several decades with focusing on condition assessment of different types of structures including aerospace,mechanical ...Structural health monitoring(SHM)is a vast,interdisciplinary research field whose literature spans several decades with focusing on condition assessment of different types of structures including aerospace,mechanical and civil structures.The need for quantitative global damage detection methods that can be applied to complex structures has led to vibration-based inspection.Statistical time series methods for SHM form an important and rapidly evolving category within the broader vibration-based methods.In the literature on the structural damage detection,many time series-based methods have been proposed.When a considered time series model approximates the vibration response of a structure and model coefficients or residual error are obtained,any deviations in these coefficients or residual error can be inferred as an indication of a change or damage in the structure.Depending on the technique employed,various damage sensitive features have been proposed to capture the deviations.This paper reviews the application of time series analysis for SHM.The different types of time series analysis are described,and the basic principles are explained in detail.Then,the literature is reviewed based on how a damage sensitive feature is formed.In addition,some investigations that have attempted to modify and/or combine time series analysis with other approaches for better damage identification are presented.展开更多
A new azopyrrole compound, 1, has been synthesized and characterized. The crystal of 1 is of monoclinic system, space group P21/c with a = 8.7167（9）, b = 17.5929（19）, c = 12.8096（15） ？, β = 97.565（2）o, V = 1...A new azopyrrole compound, 1, has been synthesized and characterized. The crystal of 1 is of monoclinic system, space group P21/c with a = 8.7167（9）, b = 17.5929（19）, c = 12.8096（15） ？, β = 97.565（2）o, V = 1947.3（4） ^3, Z = 4, C（20）H（26）N4O2, Mr = 354.45, Dc = 1.209 g/cm^3, F（000） = 760 and μ（Mo Kα） = 0.080 mm^-1. In the crystal, 1 binds one methanol molecule through N–H…O, O–H…O and O–H…π interactions. UV-Vis titration and 1H NMR titration studies reveal that compound 1 can selectively detect fluoride ion in the DMSO solution.展开更多
Structural change in panel data is a widespread phenomena. This paper proposes a fluctuation test to detect a structural change at an unknown date in heterogeneous panel data models with or without common correlated e...Structural change in panel data is a widespread phenomena. This paper proposes a fluctuation test to detect a structural change at an unknown date in heterogeneous panel data models with or without common correlated effects. The asymptotic properties of the fluctuation statistics in two cases are developed under the null and local alternative hypothesis. Furthermore, the consistency of the change point estimator is proven. Monte Carlo simulation shows that the fluctuation test can control the probability of type I error in most cases, and the empirical power is high in case of small and moderate sample sizes. An application of the procedure to a real data is presented.展开更多
Structural integrity is essential for safety in infrastructure,as it can help prevent catastrophic failures and financial losses.The significance of vibration-based damage detection has grown substantially in fields s...Structural integrity is essential for safety in infrastructure,as it can help prevent catastrophic failures and financial losses.The significance of vibration-based damage detection has grown substantially in fields such as civil and mechanical engineering.Concurrently,the advancements in computational capacities have facilitated the integration of machine learning into damage detection processes through post-processing algorithms.Nevertheless,these require extensive data from structure-affixed sensors,raising computational requirements.In an effort to address this challenge,we propose a novel approach utilizing a pre-trained convolutional neural network(CNN)based on images to identify and assess structural damage.This method involves employing wavelet transform and scalograms to convert numerical acceleration data into image data,preserving spatial and temporal information more effectively compared to conventional Fourier transform frequency analysis.Six acceleration data channels are collected from carefully chosen nodes on a mini bridge model and a corresponding finite element bridge model,to train the CNN.The efficiency of training is further enhanced by applying transfer machine learning through two pre-trained CNNs,namely Alexnet and Resnet.We evaluate our method using different damage scenarios,and both Alexnet and Resnet show prediction accuracies over 90%.展开更多
This paper aims at successive structural damage detection of long-span bridges under changing temperature conditions.First,the frequency-temperature correlation models of bridges are formulated by means of artificial ...This paper aims at successive structural damage detection of long-span bridges under changing temperature conditions.First,the frequency-temperature correlation models of bridges are formulated by means of artificial neural network techniques to eliminate the temperature effects on the measured modal frequencies.Then,the measured modal frequencies under various temperatures are normalized to a reference temperature,based on which the auto-associative network is trained to monitor signal damage occurrences by means of neural-network-based novelty detection techniques.The effectiveness of the proposed approach is examined in the Runyang Suspension Bridge using 236-day health monitoring data.The results reveal that the seasonal change of environmental temperature accounts for variations in the measured modal frequencies with averaged variances of 2.0%.And the approach exhibits good capability for detecting the damage-induced 0.1% variance of modal frequencies and it is suitable for online condition monitoring of suspension bridges.展开更多
The use of multi-perspective and multi-scalar city networks has gradually developed into a range of critical approaches to understand spatial interactions and linkages. In particular, road linkages represent key chara...The use of multi-perspective and multi-scalar city networks has gradually developed into a range of critical approaches to understand spatial interactions and linkages. In particular, road linkages represent key characteristics of spatial dependence and distance decay, and are of great significance in depicting spatial relationships at the regional scale. Therefore, based on highway passenger flow data between prefecture-level administrative units, this paper attempted to identify the functional structures and regional impacts of city networks in China, and to further explore the spatial organization patterns of the existing functional regions, aiming to deepen our understanding of city network structures and to provide new cognitive perspectives for ongoing research. The research results lead to four key conclusions. First, city networks that are based on highway flows exhibit strong spatial dependence and hierarchical characteristics, to a large extent spatially coupled with the distributions of major megaregions in China. These phenomena are a reflection of spatial relationships at regional scales as well as core-periphery structure. Second, 19 communities that belong to an important type of spatial configuration are identified through community detection algorithm, and we suggest they are correspondingly urban economic regions within urban China. Their spatial metaphors include the administrative region economy, spatial spillover effects of megaregions, and core-periphery structure. Third, each community possesses a specific city network system and exhibits strong spatial dependence and various spatial organization patterns. Regional patterns have emerged as the result of multi-level, dynamic, and networked characteristics. Fourth, adopting a morphology-based perspective, the regional city network systems can be basically divided into monocentric, dual-nuclei, polycentric, and low-level equilibration spatial structures, while most are developing monocentrically.展开更多
Based on dynamic response signals a damage detection algorithm is developed for marine risers. Damage detection methods based on numerous modal properties have encountered issues in the researches in offshore oil comm...Based on dynamic response signals a damage detection algorithm is developed for marine risers. Damage detection methods based on numerous modal properties have encountered issues in the researches in offshore oil community. For example, significant increase in structure mass due to marine plant/animal growth and changes in modal properties by equipment noise are not the result of damage for riser structures. In an attempt to eliminate the need to determine modal parameters, a data-based method is developed. The implementation of the method requires that vibration data are first standardized to remove the influence of different loading conditions and the autoregressive moving average(ARMA) model is used to fit vibration response signals. In addition, a damage feature factor is introduced based on the autoregressive(AR) parameters. After that, the Euclidean distance between ARMA models is subtracted as a damage indicator for damage detection and localization and a top tensioned riser simulation model with different damage scenarios is analyzed using the proposed method with dynamic acceleration responses of a marine riser as sensor data. Finally, the influence of measured noise is analyzed. According to the damage localization results, the proposed method provides accurate damage locations of risers and is robust to overcome noise effect.展开更多
This paper presents a new approach for automatical classification of structural state through deep learning.In this work,a Convolutional Neural Network(CNN)was designed to fuse both the feature extraction and classifi...This paper presents a new approach for automatical classification of structural state through deep learning.In this work,a Convolutional Neural Network(CNN)was designed to fuse both the feature extraction and classification blocks into an intelligent and compact learning system and detect the structural state of a steel frame;the input was a series of vibration signals,and the output was a structural state.The digital image correlation(DIC)technology was utilized to collect vibration information of an actual steel frame,and subsequently,the raw signals,without further pre-processing,were directly utilized as the CNN samples.The results show that CNN can achieve 99%classification accuracy for the research model.Besides,compared with the backpropagation neural network(BPNN),the CNN had an accuracy similar to that of the BPNN,but it only consumes 19%of the training time.The outputs of the convolution and pooling layers were visually displayed and discussed as well.It is demonstrated that:1)the CNN can extract the structural state information from the vibration signals and classify them;2)the detection and computational performance of the CNN for the incomplete data are better than that of the BPNN;3)the CNN has better anti-noise ability.展开更多
In this paper,a two-layer hierarchical structure of optimization and control for polypropylene grade transition was raised to overcome process uncertain disturbances that led to the large deviation between the open-lo...In this paper,a two-layer hierarchical structure of optimization and control for polypropylene grade transition was raised to overcome process uncertain disturbances that led to the large deviation between the open-loop reference trajectory and the actual process.In the upper layer,the variant time scale based control vector parametric methods(VTS-CVP) was used for dynamic optimization of transition reference trajectory,while nonlinear model predictive controller(NMPC) based on closed-loop subspace and piece-wise linear(SSARX-PWL) model in the lower layer was tracking to the reference trajectory from the upper layer for overcoming high-frequency disturbances.Besides,mechanism about trajectory deviation detection and optimal trajectory updating online were introduced to ensure a smooth transition for the entire process.The proposed method was validated with the real data from an industrial double-loop propylene polymerization reaction process with developed dynamic mechanism mathematical model.展开更多
基金supported by the Project of Guangdong Province High Level University Construction for Guangdong University of Technology(Grant No.262519003)the College Student Innovation Training Program of Guangdong University of Technology(Grant Nos.S202211845154 and xj2023118450384).
文摘Structural damage detection(SDD)remains highly challenging,due to the difficulty in selecting the optimal damage features from a vast amount of information.In this study,a tree model-based method using decision tree and random forest was employed for feature selection of vibration response signals in SDD.Signal datasets were obtained by numerical experiments and vibration experiments,respectively.Dataset features extracted using this method were input into a convolutional neural network to determine the location of structural damage.Results indicated a 5%to 10%improvement in detection accuracy compared to using original datasets without feature selection,demonstrating the feasibility of this method.The proposed method,based on tree model and classification,addresses the issue of extracting effective information from numerous vibration response signals in structural health monitoring.
基金financially supported by the National Key Research and Development Program of China(No.2022YFA1205300 and No.2022YFA1205304)the Oceanic Interdisciplinary Program of Shanghai Jiao Tong University(SL2022ZD103).
文摘Monitoring minuscule mechanical signals,both in magnitude and direction,is imperative in many application scenarios,e.g.,structural health monitoring and robotic sensing systems.However,the piezoelectric sensor struggles to satisfy the requirements for directional recognition due to the limited piezoelectric coefficient matrix,and achieving sensitivity for detecting micrometer-scale deformations is also challenging.Herein,we develop a vector sensor composed of lead zirconate titanate-electronic grade glass fiber composite filaments with oriented arrangement,capable of detecting minute anisotropic deformations.The as-prepared vector sensor can identify the deformation directions even when subjected to an unprecedented nominal strain of 0.06%,thereby enabling its utility in accurately discerning the 5μm-height wrinkles in thin films and in monitoring human pulse waves.The ultra-high sensitivity is attributed to the formation of porous ferroelectret and the efficient load transfer efficiency of continuous lead zirconate titanate phase.Additionally,when integrated with machine learning techniques,the sensor’s capability to recognize multi-signals enables it to differentiate between 10 types of fine textures with 100%accuracy.The structural design in piezoelectric devices enables a more comprehensive perception of mechanical stimuli,offering a novel perspective for enhancing recognition accuracy.
基金The National High Technology Research and Develop-ment Program of China(863Program)(No.2006AA04Z416)the Na-tional Science Fund for Distinguished Young Scholars(No.50725828)the Excellent Dissertation Program for Doctoral Degree of Southeast University(No.0705)
文摘Multi-source information fusion （MSIF） is imported into structural damage diagnosis methods to improve the validity of damage detection. After the introduction of the basic theory, the function model, classifications and mathematical methods of MSIF, a structural damage detection method based on MSIF is presented, which is to fuse two or more damage character vectors from different structural damage diagnosis methods on the character-level. In an experiment of concrete plates, modal information is measured and analyzed. The structural damage detection method based on MSIF is taken to localize cracks of concrete plates and it is proved to be effective. Results of damage detection by the method based on MSIF are compared with those from the modal strain energy method and the flexibility method. Damage, which can hardly be detected by using the single damage identification method, can be diagnosed by the damage detection method based on the character-level MSIF technique. Meanwhile multi-location damage can be identified by the method based on MSIF. This method is sensitive to structural damage and different mathematical methods for MSIF have different preconditions and applicabilities for diversified structures. How to choose mathematical methods for MSIF should be discussed in detail in health monitoring systems of actual structures.
文摘This paper presents a new method using the damage induction vector (DIV) and the best achievable vector (BAV) by which the change of modes due to structural damage can be applied to detcrnlinc the location and scale of damage in structures. By the DIV, undamagc elements can be castly identified and the damage detection can be limited to a few domains of the structure. The structural damage is located by conlputing the Euclidean distance betwcen the DIV and its BAV. The loss of both stiffness and mass properties can be located and quantified.The characteristic of this method is less calculation and there is no limitation of damage scale. Finally, the effectiveness of the method is demonstrated by detecting the damages of the shallow arches.
文摘Structural damage detection and monitoring are vital in product lifecycle management of aeronautic system in space utilization.In this paper,a method based on vibration characteristics and ensemble learning algorithm is proposed to achieve damage detection.Based on the small volume of modal frequency data for intact and damage structures,the extreme gradient boosting algorithm enables robust damage localization under noise condition of wing-like structures on numerical data.The method shows satisfactory performance on localizing damage with random geometrical profiles in most cases.
文摘Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detection approaches, ranging from traditional heuristic algorithms to machine learning methods, are used to identify these defects. Ensemble learning methods have strengthened the detection of these defects. However, existing approaches do not simultaneously exploit the capabilities of extracting relevant features from pre-trained models and the performance of neural networks for the classification task. Therefore, our goal has been to design a model that combines a pre-trained model to extract relevant features from code excerpts through transfer learning and a bagging method with a base estimator, a dense neural network, for defect classification. To achieve this, we composed multiple samples of the same size with replacements from the imbalanced dataset MLCQ1. For all the samples, we used the CodeT5-small variant to extract features and trained a bagging method with the neural network Roberta Classification Head to classify defects based on these features. We then compared this model to RandomForest, one of the ensemble methods that yields good results. Our experiments showed that the number of base estimators to use for bagging depends on the defect to be detected. Next, we observed that it was not necessary to use a data balancing technique with our model when the imbalance rate was 23%. Finally, for blob detection, RandomForest had a median MCC value of 0.36 compared to 0.12 for our method. However, our method was predominant in Long Method detection with a median MCC value of 0.53 compared to 0.42 for RandomForest. These results suggest that the performance of ensemble methods in detecting structural development defects is dependent on specific defects.
基金supported by the National Natural Science Foundation of China(Nos.61705027,62375031 and 52075131)the Chongqing Science and Technology Commission Basic Research Project(No.CSTC-2020jcyj-msxm0603)the Chongqing Municipal Education Commission Science and Technology Research Program(No.KJQN202000609)。
文摘To address the temperature cross-talk issue in detecting heavy metal ions in natural waters, a highly-integrated and fully fiber-optic metal ion sensing system capable of temperature-concentration decoupling measurement has been designed. This system integrates a fluidic detection structure assisted by side-polished fibers(SPFs) with a Sagnac interferometer.
基金supported in part by the National Key R&D Program(Grant No.2023YFA1606900)the National Natural Science Foundation of China(Grant No.12235003)。
文摘Chirality,a common phenomenon in nature,appears in structures ranging from galaxies and condensed matter to atomic nuclei.There is a persistent demand for new,high-precision methods to detect chiral structures,particularly at the microscale.Here,we propose a novel method,vortex Mössbauer spectroscopy,for probing chiral structures.By leveraging the orbital angular momentum carried by vortex beams,this approach achieves high precision in detecting chiral structures at scales ranging from nanometers to hundreds of nanometers.Our simulation shows the ratio of characteristic lines in the Mössbauer spectra of ^(57)Fe under vortex beams exhibits differences of up to four orders of magnitude for atomic structures with different arrangements.Additionally,simulations reveal the response of ^(229m)Th chiral structures to vortex beams with opposite angular momenta differs by approximately 49-fold.These significant spectral variations indicate that this new vortex Mössbauer probe holds great potential for investigating the microscopic chiral structures and interactions of matter.
基金supported by the National Natural Science Foundation of China(Grant No.50905187)the Shandong Provincial Natural Science Foundation(Grant No.ZR2009FQ001)
文摘This article studies the application of the alternating current field measurement （ACFM） method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.
基金Project supported by the National Basic Research Program of China(973 Program)(No.2011CB13804)
文摘For the purpose of structural health monitoring, a damage detection method combined with optimum sensor placement is proposed in this paper. The back sequential sensor placement （BSSP） algorithm is introduced to optimize the sensor locations with the aim of maximizing the 2-norm of information matrix, since the EI method is not suitable for optimum sensor placement based on eigenvector sensitivity analysis. Structural damage detection is carried out based on the respective advantages of mode shape and frequency. The optimized incomplete mode shapes yielded from the optimal sensor locations are used to localize structural damage. After the potential damage elements have been preliminarily identified, an iteration scheme is adopted to estimate the damage extent of the potential damage elements based on the changes in the frequency. The effectiveness of this method is demonstrated using a numerical example of a 31-bar truss structure.
基金supported by the National Natural Science Foundation of China (90815025, 90715032 and 50808013)
文摘A two-stage damage detection approach is proposed and experimentally demonstrated on a complicated spatial model structure with a limited number of measurements. In the experiment,five known damage patterns,including 3 brace damage cases and 2 joint damage cases,were simulated by removing braces and weakening beam鈥揷olumn connections in the structure. The limited acceleration response data generated by hammer impact were used for system identification,and modal parameters were extracted by using the eigensystem realization algorithm. In the first stage,the possible damaged locations are determined by using the damage index and the characteristics of the analytical model itself,and the extent of damage for those substructures identified at stage I is estimated in the second stage by using a second-order eigen-sensitivity approximation method. The main contribution of this paper is to test the two-stage method by using the real dynamic data of a complicated spatial model structure with limited sensors. The analysis results indicate that the two-stage approach is ableto detect the location of both damage cases,only the severity of brace damage cases can be assessed,and the reasonable analytical model is critical for successful damage detection.
文摘Structural health monitoring(SHM)is a vast,interdisciplinary research field whose literature spans several decades with focusing on condition assessment of different types of structures including aerospace,mechanical and civil structures.The need for quantitative global damage detection methods that can be applied to complex structures has led to vibration-based inspection.Statistical time series methods for SHM form an important and rapidly evolving category within the broader vibration-based methods.In the literature on the structural damage detection,many time series-based methods have been proposed.When a considered time series model approximates the vibration response of a structure and model coefficients or residual error are obtained,any deviations in these coefficients or residual error can be inferred as an indication of a change or damage in the structure.Depending on the technique employed,various damage sensitive features have been proposed to capture the deviations.This paper reviews the application of time series analysis for SHM.The different types of time series analysis are described,and the basic principles are explained in detail.Then,the literature is reviewed based on how a damage sensitive feature is formed.In addition,some investigations that have attempted to modify and/or combine time series analysis with other approaches for better damage identification are presented.
基金supported by the National Natural Science Foundation of China(No.21172174)
文摘A new azopyrrole compound, 1, has been synthesized and characterized. The crystal of 1 is of monoclinic system, space group P21/c with a = 8.7167（9）, b = 17.5929（19）, c = 12.8096（15） ？, β = 97.565（2）o, V = 1947.3（4） ^3, Z = 4, C（20）H（26）N4O2, Mr = 354.45, Dc = 1.209 g/cm^3, F（000） = 760 and μ（Mo Kα） = 0.080 mm^-1. In the crystal, 1 binds one methanol molecule through N–H…O, O–H…O and O–H…π interactions. UV-Vis titration and 1H NMR titration studies reveal that compound 1 can selectively detect fluoride ion in the DMSO solution.
基金supported by the National Natural Science Foundation of China under Grant Nos. 11801438,12161072 and 12171388the Natural Science Basic Research Plan in Shaanxi Province of China under Grant No. 2023-JC-YB-058the Innovation Capability Support Program of Shaanxi under Grant No. 2020PT-023。
文摘Structural change in panel data is a widespread phenomena. This paper proposes a fluctuation test to detect a structural change at an unknown date in heterogeneous panel data models with or without common correlated effects. The asymptotic properties of the fluctuation statistics in two cases are developed under the null and local alternative hypothesis. Furthermore, the consistency of the change point estimator is proven. Monte Carlo simulation shows that the fluctuation test can control the probability of type I error in most cases, and the empirical power is high in case of small and moderate sample sizes. An application of the procedure to a real data is presented.
基金supported by the ATC+Program(20014127,Development of a smart monitoring system integrating 3D printed battery-free antenna sensor technology with AI optimization)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea).
文摘Structural integrity is essential for safety in infrastructure,as it can help prevent catastrophic failures and financial losses.The significance of vibration-based damage detection has grown substantially in fields such as civil and mechanical engineering.Concurrently,the advancements in computational capacities have facilitated the integration of machine learning into damage detection processes through post-processing algorithms.Nevertheless,these require extensive data from structure-affixed sensors,raising computational requirements.In an effort to address this challenge,we propose a novel approach utilizing a pre-trained convolutional neural network(CNN)based on images to identify and assess structural damage.This method involves employing wavelet transform and scalograms to convert numerical acceleration data into image data,preserving spatial and temporal information more effectively compared to conventional Fourier transform frequency analysis.Six acceleration data channels are collected from carefully chosen nodes on a mini bridge model and a corresponding finite element bridge model,to train the CNN.The efficiency of training is further enhanced by applying transfer machine learning through two pre-trained CNNs,namely Alexnet and Resnet.We evaluate our method using different damage scenarios,and both Alexnet and Resnet show prediction accuracies over 90%.
基金The National Natural Science Foundation of China(No.50725828,50808041)the Natural Science Foundation of Jiangsu Province(No.BK2008312)the Ph.D.Programs Foundation of Ministry of Education of China(No.200802861011)
文摘This paper aims at successive structural damage detection of long-span bridges under changing temperature conditions.First,the frequency-temperature correlation models of bridges are formulated by means of artificial neural network techniques to eliminate the temperature effects on the measured modal frequencies.Then,the measured modal frequencies under various temperatures are normalized to a reference temperature,based on which the auto-associative network is trained to monitor signal damage occurrences by means of neural-network-based novelty detection techniques.The effectiveness of the proposed approach is examined in the Runyang Suspension Bridge using 236-day health monitoring data.The results reveal that the seasonal change of environmental temperature accounts for variations in the measured modal frequencies with averaged variances of 2.0%.And the approach exhibits good capability for detecting the damage-induced 0.1% variance of modal frequencies and it is suitable for online condition monitoring of suspension bridges.
基金National Natural Science Foundation of China,No.41530751,No.41471113,No.41601165
文摘The use of multi-perspective and multi-scalar city networks has gradually developed into a range of critical approaches to understand spatial interactions and linkages. In particular, road linkages represent key characteristics of spatial dependence and distance decay, and are of great significance in depicting spatial relationships at the regional scale. Therefore, based on highway passenger flow data between prefecture-level administrative units, this paper attempted to identify the functional structures and regional impacts of city networks in China, and to further explore the spatial organization patterns of the existing functional regions, aiming to deepen our understanding of city network structures and to provide new cognitive perspectives for ongoing research. The research results lead to four key conclusions. First, city networks that are based on highway flows exhibit strong spatial dependence and hierarchical characteristics, to a large extent spatially coupled with the distributions of major megaregions in China. These phenomena are a reflection of spatial relationships at regional scales as well as core-periphery structure. Second, 19 communities that belong to an important type of spatial configuration are identified through community detection algorithm, and we suggest they are correspondingly urban economic regions within urban China. Their spatial metaphors include the administrative region economy, spatial spillover effects of megaregions, and core-periphery structure. Third, each community possesses a specific city network system and exhibits strong spatial dependence and various spatial organization patterns. Regional patterns have emerged as the result of multi-level, dynamic, and networked characteristics. Fourth, adopting a morphology-based perspective, the regional city network systems can be basically divided into monocentric, dual-nuclei, polycentric, and low-level equilibration spatial structures, while most are developing monocentrically.
基金financially supported by the 973 Project (Grant No. 2011CB013704)by the National Natural Science Foundation of China (Grant Nos. 51379005, 51009093)
文摘Based on dynamic response signals a damage detection algorithm is developed for marine risers. Damage detection methods based on numerous modal properties have encountered issues in the researches in offshore oil community. For example, significant increase in structure mass due to marine plant/animal growth and changes in modal properties by equipment noise are not the result of damage for riser structures. In an attempt to eliminate the need to determine modal parameters, a data-based method is developed. The implementation of the method requires that vibration data are first standardized to remove the influence of different loading conditions and the autoregressive moving average(ARMA) model is used to fit vibration response signals. In addition, a damage feature factor is introduced based on the autoregressive(AR) parameters. After that, the Euclidean distance between ARMA models is subtracted as a damage indicator for damage detection and localization and a top tensioned riser simulation model with different damage scenarios is analyzed using the proposed method with dynamic acceleration responses of a marine riser as sensor data. Finally, the influence of measured noise is analyzed. According to the damage localization results, the proposed method provides accurate damage locations of risers and is robust to overcome noise effect.
文摘This paper presents a new approach for automatical classification of structural state through deep learning.In this work,a Convolutional Neural Network(CNN)was designed to fuse both the feature extraction and classification blocks into an intelligent and compact learning system and detect the structural state of a steel frame;the input was a series of vibration signals,and the output was a structural state.The digital image correlation(DIC)technology was utilized to collect vibration information of an actual steel frame,and subsequently,the raw signals,without further pre-processing,were directly utilized as the CNN samples.The results show that CNN can achieve 99%classification accuracy for the research model.Besides,compared with the backpropagation neural network(BPNN),the CNN had an accuracy similar to that of the BPNN,but it only consumes 19%of the training time.The outputs of the convolution and pooling layers were visually displayed and discussed as well.It is demonstrated that:1)the CNN can extract the structural state information from the vibration signals and classify them;2)the detection and computational performance of the CNN for the incomplete data are better than that of the BPNN;3)the CNN has better anti-noise ability.
基金Supported by the Electronic Information Industry Development Foundation of China(20140806)the National Natural Science Foundation of China(61374121,61134007)
文摘In this paper,a two-layer hierarchical structure of optimization and control for polypropylene grade transition was raised to overcome process uncertain disturbances that led to the large deviation between the open-loop reference trajectory and the actual process.In the upper layer,the variant time scale based control vector parametric methods(VTS-CVP) was used for dynamic optimization of transition reference trajectory,while nonlinear model predictive controller(NMPC) based on closed-loop subspace and piece-wise linear(SSARX-PWL) model in the lower layer was tracking to the reference trajectory from the upper layer for overcoming high-frequency disturbances.Besides,mechanism about trajectory deviation detection and optimal trajectory updating online were introduced to ensure a smooth transition for the entire process.The proposed method was validated with the real data from an industrial double-loop propylene polymerization reaction process with developed dynamic mechanism mathematical model.
