Echinococcus is a zoonotic parasite and 1 of 17 neglected tropical diseases with a worldwide distribution.The World Health Organization(WHO)targeted for control or elimination by 2050[1,2].Two main species of Echinoco...Echinococcus is a zoonotic parasite and 1 of 17 neglected tropical diseases with a worldwide distribution.The World Health Organization(WHO)targeted for control or elimination by 2050[1,2].Two main species of Echinococcus infect humans:Echinococcus granulosus,causing cystic echinococcosis(CE),and Echinococcus multilocularis(EM),causing alveolar echinococcosis(AE)[3].AE is much rarer but far more severe than CE and ranks as one of the most dangerous helminthic zoonoses in the world[4,5].Humans are rare aberrant intermediate hosts and typically become infected through the ingestion of EM eggs shed in the feces of definitive hosts[6].After an incubation period of many years,humans may develop AE[7].While slow-growing,AE is a devastating clinical condition characterized by silent progression and infiltrative proliferation of the parasite,mimicking a malignancy[7].Without appropriate treatment,AE has a death rate of more than 90%within 10 years of diagnosis[5].For this reason,AE must be considered in the differential diagnosis of patients presenting with a hepatic mass or malignancy.展开更多
ZnO with good lithiophilicity has widely been employed to modify the lithiophobic substrates and facilitate uniform lithium(Li)deposition.The overpotential of ZnO-derived Li anode during cycling depends on the lithiop...ZnO with good lithiophilicity has widely been employed to modify the lithiophobic substrates and facilitate uniform lithium(Li)deposition.The overpotential of ZnO-derived Li anode during cycling depends on the lithiophilicity of both LiZn and Li_(2)O products upon lithiation of ZnO.However,the striking differences in the lithiophilicity between Li_(2)O and LiZn would result in a high overpotential during cycling.In this research,the Al_(2)O_(3)/nZnO(n≥1)hybrid layers were precisely fabricated by atomic layer deposition(ALD)to regulate the lithiophilicity of ZnO phase and Li_(2)O/LiZn configuration—determining the actual Li loading amount and Li plating/stripping processes.Theoretically,the Li adsorption energy(E_(a))values of LiZn and Li_(2)O in the LiZn/Li_(2)O configuration are separately predicted as-2.789 and-3.447 eV.In comparison,the E_(a) values of LiZn,LiAlO_(2),and Li_(2)O in the LiZn/LiAlO_(2)/Li_(2)O configuration upon lithiation of Al_(2)O_(3)/8ZnO layer are calculated as-2.899,-3.089,and-3.208 eV,respectively.Importantly,a novel introduction of LiAlO_(2)into the LiZn/Li_(2)O configuration could enable the hierarchical Li plating/stripping and reduce the overpotentials during cycling.Consequently,the Al_(2)O_(3)/8ZnO-derived hybrid Li-metal anode could exhibit electrochemical performances superior to these of ZnO-derived Li anode in both symmetrical and full cells paired with a LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622)cathode.展开更多
The uncontrollable Li electrostripping and plating process that results in dendritic Li growth and huge volume change of Li anode limits the practicality of Li metal batteries(LMBs).To simultaneously address these iss...The uncontrollable Li electrostripping and plating process that results in dendritic Li growth and huge volume change of Li anode limits the practicality of Li metal batteries(LMBs).To simultaneously address these issues,designing three-dimensional(3D),lithiophilic and mechanically robust electrodes seems to be one of the cost-effective strategies.Herein,a new 3D Li-B-C-Al alloy anode is designed and fabricated.The prepared 3D alloy anode exhibits not only superior lithiophilicity that facilitates uniform Li nucleation and growth but also sufficient mechanical stability that maintains its structural integrity.Superior performance of the prepared 3D alloy is demonstrated through comprehensive electrochemical tests.In addition,non-destructive and 3D synchrotron X-ray computed tomography(SX-CT)technique is employed to investigate the underlying working mechanisms of the prepared alloy anode.A unique twofold Li electrostripping and plating mechanism under different electrochemical cycling conditions is revealed.Lastly,improved performance of the full cells built with the 3D alloy anode and LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathode corroborate its potential application capability.Overall,the current work not only showcases the superiority of the 3D alloy as potential anode material for LMBs but also provides fundamental insights into its underlying working mechanisms that may further propel its research and development.展开更多
Stripping injection overcomes the limitations of Liouville's theorem and is widely used for beam injection and accumulation in high-intensity synchrotrons.The interaction between the stripping foil and beam is cru...Stripping injection overcomes the limitations of Liouville's theorem and is widely used for beam injection and accumulation in high-intensity synchrotrons.The interaction between the stripping foil and beam is crucial in the study of stripping injection,particularly in low-energy stripping injection synchrotrons,such as the XiPAF synchrotron.The foil thickness is the main parameter that affects the properties of the beam after injection.The thin stripping foil is reinforced with collodion during its installation.However,the collodion on the foil surface makes it difficult to determine its equivalent thickness,because the mechanical measurements are not sufficiently reliable or convenient for continuously determining foil thickness.We propose an online stripping foil thickness measurement method based on the ionization energy loss effect,which is suitable for any foil thickness and does not require additional equipment.Experimental studies were conducted using the XiPAF synchrotron.The limitation of this method was examined,and the results were verified by comparing the experimentally obtained beam current accumulation curves with the simulation results.This confirms the accuracy and reliability of the proposed method for measuring the stripping foil thickness.展开更多
High ammonia-nitrogen digestate has become a key bottleneck limiting the anaerobic digestion of organic solid waste.Vacuum ammonia stripping can simultaneously remove and recover ammonia nitrogen,which has attracted a...High ammonia-nitrogen digestate has become a key bottleneck limiting the anaerobic digestion of organic solid waste.Vacuum ammonia stripping can simultaneously remove and recover ammonia nitrogen,which has attracted a lot of attention in recent years.To investigate the parameter effects on the efficiency and mass transfer,five combination conditions(53℃ 15 kPa,60°C 20 kPa,65°C 25 kPa,72°C 35 kPa,and 81°C 50 kPa)were conducted for ammonia stripping of sludge digestate.The results showed that 80%of ammonia nitrogen was stripped in 45 min for all experimental groups,but the ammonia transfer coefficient varied under different conditions,which increased with the rising of boiling point temperature,and reached the maximum value(39.0 mm/hr)at 81°C 50 kPa.The ammonia nitrogen removal efficiency was more than 80%for 30 min vacuum stripping after adjusting the initial pH to above 9.5,and adjustment of the initial alkalinity also affects the pH value of liquid digestate.It was found that pH and alkalinity are the key factors influencing the ammonia nitrogen dissociation and removal efficiency,while temperature and vacuum mainly affect the ammonia nitrogen mass transfer and removal velocity.In terms of the mechanism of vacuum ammonia stripping,it underwent alkalinity destruction,pH enhancement,ammonia nitrogen dissociation,and free ammonia removal.In this study,two-stage experiments of alkalinity destruction and ammonia removal were also carried out,which showed that the two-stage configuration was beneficial for ammonia removal.It provides a theoretical basis and practical technology for the vacuum ammonia stripping from liquid digestate of organic solid waste.展开更多
The lithium(Li)metal anode is regarded as the upcoming generation of battery anodes due to its high theoretical capacity(3860 mAh g^(-1))and low standard reduction potential(-3.04 vs SHE).Addressing challenges related...The lithium(Li)metal anode is regarded as the upcoming generation of battery anodes due to its high theoretical capacity(3860 mAh g^(-1))and low standard reduction potential(-3.04 vs SHE).Addressing challenges related to the formation of Li metal dendrites,such as short circuits and low Coulombic efficiency,is crucial for the practical implementation of Li metal anodes.Previous research on Li metal has primarily focus on the Li plating process for achieving homogeneous growth.However,our study highlights the significance of pit formation variations,which significantly influence Li growth behavior in subsequent cycles.Expanding on this understanding,we formulated electrochemical activation conditions to promote uniform pit formation,thereby doubling the cycle life in a symmetric cell,and increasing the capacity retention of NCM622||Li full-cell from 68.7%to 79.5%after 500 cycles.展开更多
AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layer...AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layers(EBLs).To overcome these limitations,we propose an EBL-free DUV LD design incor-porating a 1-nm undoped Al_(0.8)Ga_(0.2)N thin strip layer after the last quantum barrier.Using PICS3D simula-tions,we evaluate the optical and electrical characteristics.Results show a significant increase in effective electron barrier height(from 158.2 meV to 420.7 meV)and a reduction in hole barrier height(from 149.2 meV to 62.8 meV),which enhance hole injection and reduce electron leakage.The optimized structure(LD3)achieves a 14%increase in output power,improved slope efficiency(1.85 W/A),and lower threshold current.This design also reduces the quantum confined Stark effect and forms dual hole accumulation regions,im-proving recombination efficiency.展开更多
In order to meet the requirements of accurate identification of surface defects on copper strip in industrial production,a detection model of surface defects based on machine vision,CSC-YOLO,is proposed.The model uses...In order to meet the requirements of accurate identification of surface defects on copper strip in industrial production,a detection model of surface defects based on machine vision,CSC-YOLO,is proposed.The model uses YOLOv4-tiny as the benchmark network.First,K-means clustering is introduced into the benchmark network to obtain anchor frames that match the self-built dataset.Second,a cross-region fusion module is introduced in the backbone network to solve the difficult target recognition problem by fusing contextual semantic information.Third,the spatial pyramid pooling-efficient channel attention network(SPP-E)module is introduced in the path aggregation network(PANet)to enhance the extraction of features.Fourth,to prevent the loss of channel information,a lightweight attention mechanism is introduced to improve the performance of the network.Finally,the performance of the model is improved by adding adjustment factors to correct the loss function for the dimensional characteristics of the surface defects.CSC-YOLO was tested on the self-built dataset of surface defects in copper strip,and the experimental results showed that the mAP of the model can reach 93.58%,which is a 3.37% improvement compared with the benchmark network,and FPS,although decreasing compared with the benchmark network,reached 104.CSC-YOLO takes into account the real-time requirements of copper strip production.The comparison experiments with Faster RCNN,SSD300,YOLOv3,YOLOv4,Resnet50-YOLOv4,YOLOv5s,YOLOv7,and other algorithms show that the algorithm obtains a faster computation speed while maintaining a higher detection accuracy.展开更多
Highlights By conjugating the same anti-N monoclonal antibody(mAb4-mAb1)with colloidal gold or fluorescent microspheres,this study developed two rapid point-of-care antigen immunochromatographic strips for the detecti...Highlights By conjugating the same anti-N monoclonal antibody(mAb4-mAb1)with colloidal gold or fluorescent microspheres,this study developed two rapid point-of-care antigen immunochromatographic strips for the detection of porcine deltacoronavirus.The fluorescent microsphere-based lateral flow test strip demonstrated a sensitivity of 10^(1.7)TCID_(50)/0.1 mL,which is fourfold higher than that of the colloidal gold-based assay.Porcine deltacoronavirus(PDCoV)is a recently identified enteric coronavirus that causes an acute infectious disease in piglets,leading to diarrhea,vomiting,dehydration,and mortality(Hu et al.2015).展开更多
Flavonoids produced by legume roots act as signaling molecules that induce the expression of nod genes in symbiotic rhizobia.However,the role of flavonoids in root exudates under intercropping systems in promoting soy...Flavonoids produced by legume roots act as signaling molecules that induce the expression of nod genes in symbiotic rhizobia.However,the role of flavonoids in root exudates under intercropping systems in promoting soybean nodulation remains unclear.Two consecutive years of field experiments were conducted using maize–soybean strip intercropping with interspecific row spacings of 30 cm(MS30),45 cm(MS45),and 60 cm(MS60),along with sole cropping of soybean(SS)and maize(MM).Root interactions were manipulated using either no root barrier(NB)or a polyethylene plastic barrier(PB)to assess the relationship between flavonoids in root exudates and soybean nodulation.We found that root–root interaction between soybean and maize increased nodule number and fresh weight in intercropped soybean,with enhancement gradually increasing as interspecific distance widened.The proportion of nodules with diameters exceeding 0.4 cm was higher in intercropped soybean under NB compared to PB.Additionally,the expression of nodule-related genes-GmENOD40,Gm NIN2b,and Gm EXPB2-was up-regulated.Furthermore,compared to monocropping,isoflavone secretion by soybean roots decreased,whereas flavonoid and flavonol secretion by both maize and soybean roots increased under intercropping.The abundance of differentially secreted flavonoid metabolites in the rhizosphere of both species declined when root contact was prevented by the barrier.In soybean roots,the expression of Gm CHS8 and Gm IFS1 was up-regulated,while Gm ICHG was down-regulated under root interaction.Most flavonoid and flavonol compounds showed positive correlations with nodule diameter.Nodule number,fresh weight,and the proportion of nodules larger than 0.2 cm increased in diverse soybean genotypes treated with maize root exudates,which contributed to enhanced nitrogen fixation capacity.Therefore,maize–soybean strip intercropping,combined with optimal row spacing,enhances the positive effects of underground root interactions and improves nodulation and nitrogen fixation in intercropped soybean.展开更多
This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A...This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A key objective is to develop a computationally efficient finite element framework capable of accurately capturing the complex behavior of 3D-FGSW plates.The studied configuration features a two-dimensional functionally graded material(2D-FGM)core between two threedimensional functionally graded material(3D-FGM)face layers.Nonlinear geometric effects,including mid-plane stretching,are modeled using von K arm an-type assumptions,and the governing equations are formulated via Hamilton's principle within an improved first-order shear deformation theory(iFSDT).The accuracy and computational efficiency of the proposed method are validated through comparison with existing benchmark solutions.Subsequently,a comprehensive parametric study is carried out to examine the effects of geometric dimensions,material properties,foundation sizes,and boundary conditions(BCs)on the nonlinear vibration of 3D-FGSW plates.The findings of this work are expected to provide valuable insights for the design and manufacturing of advanced sandwich structures subjected to BL.展开更多
Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the ...Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the effects of different additives on mullite formation,as well as the microstructure and properties of the ceramic thin plates.Additionally,the study explored the toughening and strengthening mechanisms induced by the additives,providing a theoretical foundation for further optimizing the toughness of ceramic thin plates.The results showed that the D4 sample fired at 1220℃(with an addition of 20 wt% α-Al_(2)O_(3))exhibited the best performance,with a water absorption rate of 0.07%,apparent porosity of 0.18%,bulk density of 2.75 g·cm^(-3),firing shrinkage of 12.76%,bending strength reaching 101.93 MPa,and fracture toughness of 2.51 MPa·m^(1/2).As the amount ofα-Al_(2)O_(3) additive increased,the ceramic thin plates exhibited a greater abundance of short rod-like mullite and corundum grains,which were tightly packed together,forming a framework for the ceramic thin plates.This microstructure enhanced pathways for crack propagation,dispersed internal stresses,and increased fracture surface energy,resulting in significant improvements in both strength and fracture toughness of the ceramic thin plates.展开更多
The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu...The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu-12Fe alloy strip with the thickness of 2.4 mm was successfully produced by twin-roll strip casting.The microstructure and properties of the Cu-12Fe alloy were tailored by cold rolling and aging treatment.The tensile strength of the as-cast strip is approximately 328 MPa and its elongation is 25%.The Fe phase randomly dispersed in the matrix,and the average size of Fe-rich phase is 2μm.Besides,enrichment of Fe phase is observed in the central layer of the strip,results in the formation of the“sandwich structure”.Moreover,the as-cast strip of Cu-12Fe was directly cold-rolled from 2.4 to 0.12 mm.The directly cold-rolled sample after aging at 450℃for 16 h(ProcessⅠ)shows excellent electrical conductivity of 69.5%IACS,the tensile strength and elongation are 513 MPa and 3.8%,the saturation magnetic flux density is 20.1 emu·g^(-1),and the coercive force is 25.2 Oe.In ProcessⅡ,the as-cast strip firstly cold-rolled to 1.2 mm,then aged at 500℃for 1.5 h,followed by cold rolling to 0.12 mm,finally aged at 450℃for 16 h.The sample after ProcessⅡshows the electrical conductivity of 66.3%IACS,the tensile strength of 533 MPa,an elongation of 3.5%,saturation magnetic flux density of 21.4 emu·g^(-1),and the coercive force of 22.3 Oe.展开更多
A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforat...A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress.Introducing precurved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment,and even make the frequency higher with appropriate structural parameters.The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components.The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap.A simplified model is established for the local structure of the precurved component.The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models.The transmittance of flexural wave validates the effectiveness of the proposed design.展开更多
In this paper,a theoretical model is established for locally resonant plates with general resonators,and the corresponding governing equation is derived.The model provides a mathematical demonstration of the locally r...In this paper,a theoretical model is established for locally resonant plates with general resonators,and the corresponding governing equation is derived.The model provides a mathematical demonstration of the locally resonant effect,which contains two parts:the first part is induced by translation coupling,and the second part is induced by rotation coupling.The second part cannot be reflected by most existing theoretical models.The analytical solutions of the dynamic response are compared with the direct numerical simulation(DNS)results for two locally resonant plates with different resonator types,thereby validating the general applicability of the present model.The rotation coupling effect leads to the frequency-dependent effective rotational inertia density and anisotropic dispersion relation of the locally resonant plate,as well as the enhancement of the structural vibration suppression ability.展开更多
In response to the challenges of inadequate predictive accuracy and limited generalization capability in data-driven modeling for the mechanical properties of the cold-rolled strip steel,a predictive modeling method n...In response to the challenges of inadequate predictive accuracy and limited generalization capability in data-driven modeling for the mechanical properties of the cold-rolled strip steel,a predictive modeling method named RFR-WOA is developed based on random forest regression(RFR)and whale optimization algorithm(WOA).Firstly,using Pearson and Spearman correlation analysis and Gini coefficient importance ranking on an actual production dataset containing 37,878 samples,22 key variables are selected as model inputs from 112 variables that affect mechanical properties.Subsequently,an RFR-based predictive model for the mechanical properties of cold-rolled strip steel is constructed.Then,with the combination of the coefficient of determination(R^(2))and root mean square error as the optimization objective,the hyperparameters of RFR model are iteratively optimized using WOA,and better predictive effectiveness is obtained.Finally,the mechanical properties prediction model based on RFR-WOA is compared with models established using deep neural networks,convolutional neural networks,and other methods.The test results on 9469 samples of actual production data show that the model developed present has better predictive accuracy and generalization capability.展开更多
In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regiona...In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.展开更多
A 32-channel charge-sensitive amplifier(CSA)is designed for fast timing in the delay-line readout of a parallel plate avalanche counter(PPAC)array.It is realized on a PCB with operational amplifiers and other discrete...A 32-channel charge-sensitive amplifier(CSA)is designed for fast timing in the delay-line readout of a parallel plate avalanche counter(PPAC)array.It is realized on a PCB with operational amplifiers and other discrete components.Each channel consists of an integrator,a pole-zero cancellation net,and a linear amplification stage,which can be adapted to accommodate either positive or negative input signals.The RMS equivalent input noise charges are 3.3 fC,the conversion gains are approximately±2 mV∕fC,and the intrinsic time resolution reaches 32 ps.In the prototype PPAC application,the CSA performs as well as the commercial FTA820A amplifier,providing a position resolution as good as 0.17 mm,and exhibiting reliable stability during several hours of continuous data acquisition.展开更多
High-Mg andesites(HMAs)typically originate in subduction-related tectonic settings,including active continental margins and island arcs,and studies of HMAs can constrain the tectonic evolution of the South China Block...High-Mg andesites(HMAs)typically originate in subduction-related tectonic settings,including active continental margins and island arcs,and studies of HMAs can constrain the tectonic evolution of the South China Block and Paleo-Tethyan Ocean.This paper presents new chronological and geochemical data for high-Mg gabbroic diorites in the Funing area,southern South China.The gabbroic diorites yield ages of 254-249 Ma,and have moderate SiO2 contents(51.3%-57.8%),high MgO contents(4.6%-10.2%)and Mg^(#)values(52-75),enrichment in large-ion lithophile elements and light rare earth elements,and depletion in high-field-strength elements-collectively displaying geochemical signatures typical of sanukites.The gabbroic diorites have radiogenic initial Sr and Pb isotopic compositions,and negativeεNd(t)andεHf(t)values.These characteristics distinguish the Funing gabbroic diorites from subduction-related igneous rocks in the Paleo-Pacific tectonic domain.Instead,they are isotopically similar to HMAs and basalts along the Paleo-Tethys suture.We propose the high-Mg gabbroic diorites and basaltic andesites in Funing area share a common mantle source,linked to subduction and rollback of the Paleo-Tethyan plate beneath the South China Block,which triggered back-arc rifting and partial melting of the metasomatized lithospheric mantle during the Late Permian to Early Triassic.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
文摘Echinococcus is a zoonotic parasite and 1 of 17 neglected tropical diseases with a worldwide distribution.The World Health Organization(WHO)targeted for control or elimination by 2050[1,2].Two main species of Echinococcus infect humans:Echinococcus granulosus,causing cystic echinococcosis(CE),and Echinococcus multilocularis(EM),causing alveolar echinococcosis(AE)[3].AE is much rarer but far more severe than CE and ranks as one of the most dangerous helminthic zoonoses in the world[4,5].Humans are rare aberrant intermediate hosts and typically become infected through the ingestion of EM eggs shed in the feces of definitive hosts[6].After an incubation period of many years,humans may develop AE[7].While slow-growing,AE is a devastating clinical condition characterized by silent progression and infiltrative proliferation of the parasite,mimicking a malignancy[7].Without appropriate treatment,AE has a death rate of more than 90%within 10 years of diagnosis[5].For this reason,AE must be considered in the differential diagnosis of patients presenting with a hepatic mass or malignancy.
基金supported by the National Key Research and Development Program of China(2021YFB2400202)the National Natural Science Foundation of China(52104313)+1 种基金the Key Research and Development Plan of Shaanxi(2024GH-YBXM-11)the Foshan Science and Technology Innovation Team Project(1920001004098).
文摘ZnO with good lithiophilicity has widely been employed to modify the lithiophobic substrates and facilitate uniform lithium(Li)deposition.The overpotential of ZnO-derived Li anode during cycling depends on the lithiophilicity of both LiZn and Li_(2)O products upon lithiation of ZnO.However,the striking differences in the lithiophilicity between Li_(2)O and LiZn would result in a high overpotential during cycling.In this research,the Al_(2)O_(3)/nZnO(n≥1)hybrid layers were precisely fabricated by atomic layer deposition(ALD)to regulate the lithiophilicity of ZnO phase and Li_(2)O/LiZn configuration—determining the actual Li loading amount and Li plating/stripping processes.Theoretically,the Li adsorption energy(E_(a))values of LiZn and Li_(2)O in the LiZn/Li_(2)O configuration are separately predicted as-2.789 and-3.447 eV.In comparison,the E_(a) values of LiZn,LiAlO_(2),and Li_(2)O in the LiZn/LiAlO_(2)/Li_(2)O configuration upon lithiation of Al_(2)O_(3)/8ZnO layer are calculated as-2.899,-3.089,and-3.208 eV,respectively.Importantly,a novel introduction of LiAlO_(2)into the LiZn/Li_(2)O configuration could enable the hierarchical Li plating/stripping and reduce the overpotentials during cycling.Consequently,the Al_(2)O_(3)/8ZnO-derived hybrid Li-metal anode could exhibit electrochemical performances superior to these of ZnO-derived Li anode in both symmetrical and full cells paired with a LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622)cathode.
基金supported by the National Natural Science Foundation of China(U1904216).
文摘The uncontrollable Li electrostripping and plating process that results in dendritic Li growth and huge volume change of Li anode limits the practicality of Li metal batteries(LMBs).To simultaneously address these issues,designing three-dimensional(3D),lithiophilic and mechanically robust electrodes seems to be one of the cost-effective strategies.Herein,a new 3D Li-B-C-Al alloy anode is designed and fabricated.The prepared 3D alloy anode exhibits not only superior lithiophilicity that facilitates uniform Li nucleation and growth but also sufficient mechanical stability that maintains its structural integrity.Superior performance of the prepared 3D alloy is demonstrated through comprehensive electrochemical tests.In addition,non-destructive and 3D synchrotron X-ray computed tomography(SX-CT)technique is employed to investigate the underlying working mechanisms of the prepared alloy anode.A unique twofold Li electrostripping and plating mechanism under different electrochemical cycling conditions is revealed.Lastly,improved performance of the full cells built with the 3D alloy anode and LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathode corroborate its potential application capability.Overall,the current work not only showcases the superiority of the 3D alloy as potential anode material for LMBs but also provides fundamental insights into its underlying working mechanisms that may further propel its research and development.
文摘Stripping injection overcomes the limitations of Liouville's theorem and is widely used for beam injection and accumulation in high-intensity synchrotrons.The interaction between the stripping foil and beam is crucial in the study of stripping injection,particularly in low-energy stripping injection synchrotrons,such as the XiPAF synchrotron.The foil thickness is the main parameter that affects the properties of the beam after injection.The thin stripping foil is reinforced with collodion during its installation.However,the collodion on the foil surface makes it difficult to determine its equivalent thickness,because the mechanical measurements are not sufficiently reliable or convenient for continuously determining foil thickness.We propose an online stripping foil thickness measurement method based on the ionization energy loss effect,which is suitable for any foil thickness and does not require additional equipment.Experimental studies were conducted using the XiPAF synchrotron.The limitation of this method was examined,and the results were verified by comparing the experimentally obtained beam current accumulation curves with the simulation results.This confirms the accuracy and reliability of the proposed method for measuring the stripping foil thickness.
基金supported by the National Key Research and Development Program of China(No.2020YFC1908702)the National Natural Science Foundation of China(No.52131002)+1 种基金the Science and Technology Commission of Shanghai Municipality(No.22dz1209200)China Three Gorges Corporation(No.202403018).
文摘High ammonia-nitrogen digestate has become a key bottleneck limiting the anaerobic digestion of organic solid waste.Vacuum ammonia stripping can simultaneously remove and recover ammonia nitrogen,which has attracted a lot of attention in recent years.To investigate the parameter effects on the efficiency and mass transfer,five combination conditions(53℃ 15 kPa,60°C 20 kPa,65°C 25 kPa,72°C 35 kPa,and 81°C 50 kPa)were conducted for ammonia stripping of sludge digestate.The results showed that 80%of ammonia nitrogen was stripped in 45 min for all experimental groups,but the ammonia transfer coefficient varied under different conditions,which increased with the rising of boiling point temperature,and reached the maximum value(39.0 mm/hr)at 81°C 50 kPa.The ammonia nitrogen removal efficiency was more than 80%for 30 min vacuum stripping after adjusting the initial pH to above 9.5,and adjustment of the initial alkalinity also affects the pH value of liquid digestate.It was found that pH and alkalinity are the key factors influencing the ammonia nitrogen dissociation and removal efficiency,while temperature and vacuum mainly affect the ammonia nitrogen mass transfer and removal velocity.In terms of the mechanism of vacuum ammonia stripping,it underwent alkalinity destruction,pH enhancement,ammonia nitrogen dissociation,and free ammonia removal.In this study,two-stage experiments of alkalinity destruction and ammonia removal were also carried out,which showed that the two-stage configuration was beneficial for ammonia removal.It provides a theoretical basis and practical technology for the vacuum ammonia stripping from liquid digestate of organic solid waste.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea Government(MSIT)(RS-202400422387)the National Research Foundation of Korea(NRF)grant funded by the Korea Government(MSIT)(RS-2024-00404414)support by The Ministry of Science and ICT in Korea via KBSI(Grant No.C524100).
文摘The lithium(Li)metal anode is regarded as the upcoming generation of battery anodes due to its high theoretical capacity(3860 mAh g^(-1))and low standard reduction potential(-3.04 vs SHE).Addressing challenges related to the formation of Li metal dendrites,such as short circuits and low Coulombic efficiency,is crucial for the practical implementation of Li metal anodes.Previous research on Li metal has primarily focus on the Li plating process for achieving homogeneous growth.However,our study highlights the significance of pit formation variations,which significantly influence Li growth behavior in subsequent cycles.Expanding on this understanding,we formulated electrochemical activation conditions to promote uniform pit formation,thereby doubling the cycle life in a symmetric cell,and increasing the capacity retention of NCM622||Li full-cell from 68.7%to 79.5%after 500 cycles.
文摘AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layers(EBLs).To overcome these limitations,we propose an EBL-free DUV LD design incor-porating a 1-nm undoped Al_(0.8)Ga_(0.2)N thin strip layer after the last quantum barrier.Using PICS3D simula-tions,we evaluate the optical and electrical characteristics.Results show a significant increase in effective electron barrier height(from 158.2 meV to 420.7 meV)and a reduction in hole barrier height(from 149.2 meV to 62.8 meV),which enhance hole injection and reduce electron leakage.The optimized structure(LD3)achieves a 14%increase in output power,improved slope efficiency(1.85 W/A),and lower threshold current.This design also reduces the quantum confined Stark effect and forms dual hole accumulation regions,im-proving recombination efficiency.
基金the Key Project of Basic Research of Yunnan Province(No.202101AS070016)。
文摘In order to meet the requirements of accurate identification of surface defects on copper strip in industrial production,a detection model of surface defects based on machine vision,CSC-YOLO,is proposed.The model uses YOLOv4-tiny as the benchmark network.First,K-means clustering is introduced into the benchmark network to obtain anchor frames that match the self-built dataset.Second,a cross-region fusion module is introduced in the backbone network to solve the difficult target recognition problem by fusing contextual semantic information.Third,the spatial pyramid pooling-efficient channel attention network(SPP-E)module is introduced in the path aggregation network(PANet)to enhance the extraction of features.Fourth,to prevent the loss of channel information,a lightweight attention mechanism is introduced to improve the performance of the network.Finally,the performance of the model is improved by adding adjustment factors to correct the loss function for the dimensional characteristics of the surface defects.CSC-YOLO was tested on the self-built dataset of surface defects in copper strip,and the experimental results showed that the mAP of the model can reach 93.58%,which is a 3.37% improvement compared with the benchmark network,and FPS,although decreasing compared with the benchmark network,reached 104.CSC-YOLO takes into account the real-time requirements of copper strip production.The comparison experiments with Faster RCNN,SSD300,YOLOv3,YOLOv4,Resnet50-YOLOv4,YOLOv5s,YOLOv7,and other algorithms show that the algorithm obtains a faster computation speed while maintaining a higher detection accuracy.
基金financially supported by the National Key Research and Development Program of China(2021YFF0703600)。
文摘Highlights By conjugating the same anti-N monoclonal antibody(mAb4-mAb1)with colloidal gold or fluorescent microspheres,this study developed two rapid point-of-care antigen immunochromatographic strips for the detection of porcine deltacoronavirus.The fluorescent microsphere-based lateral flow test strip demonstrated a sensitivity of 10^(1.7)TCID_(50)/0.1 mL,which is fourfold higher than that of the colloidal gold-based assay.Porcine deltacoronavirus(PDCoV)is a recently identified enteric coronavirus that causes an acute infectious disease in piglets,leading to diarrhea,vomiting,dehydration,and mortality(Hu et al.2015).
基金funded by the National Key Research and Development Program of China(2021YFF1000500)the National Natural Science Foundation of China(32372231)(3187101212)the earmarked fund for China Agriculture Research System(CARS-04-PS21)。
文摘Flavonoids produced by legume roots act as signaling molecules that induce the expression of nod genes in symbiotic rhizobia.However,the role of flavonoids in root exudates under intercropping systems in promoting soybean nodulation remains unclear.Two consecutive years of field experiments were conducted using maize–soybean strip intercropping with interspecific row spacings of 30 cm(MS30),45 cm(MS45),and 60 cm(MS60),along with sole cropping of soybean(SS)and maize(MM).Root interactions were manipulated using either no root barrier(NB)or a polyethylene plastic barrier(PB)to assess the relationship between flavonoids in root exudates and soybean nodulation.We found that root–root interaction between soybean and maize increased nodule number and fresh weight in intercropped soybean,with enhancement gradually increasing as interspecific distance widened.The proportion of nodules with diameters exceeding 0.4 cm was higher in intercropped soybean under NB compared to PB.Additionally,the expression of nodule-related genes-GmENOD40,Gm NIN2b,and Gm EXPB2-was up-regulated.Furthermore,compared to monocropping,isoflavone secretion by soybean roots decreased,whereas flavonoid and flavonol secretion by both maize and soybean roots increased under intercropping.The abundance of differentially secreted flavonoid metabolites in the rhizosphere of both species declined when root contact was prevented by the barrier.In soybean roots,the expression of Gm CHS8 and Gm IFS1 was up-regulated,while Gm ICHG was down-regulated under root interaction.Most flavonoid and flavonol compounds showed positive correlations with nodule diameter.Nodule number,fresh weight,and the proportion of nodules larger than 0.2 cm increased in diverse soybean genotypes treated with maize root exudates,which contributed to enhanced nitrogen fixation capacity.Therefore,maize–soybean strip intercropping,combined with optimal row spacing,enhances the positive effects of underground root interactions and improves nodulation and nitrogen fixation in intercropped soybean.
文摘This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A key objective is to develop a computationally efficient finite element framework capable of accurately capturing the complex behavior of 3D-FGSW plates.The studied configuration features a two-dimensional functionally graded material(2D-FGM)core between two threedimensional functionally graded material(3D-FGM)face layers.Nonlinear geometric effects,including mid-plane stretching,are modeled using von K arm an-type assumptions,and the governing equations are formulated via Hamilton's principle within an improved first-order shear deformation theory(iFSDT).The accuracy and computational efficiency of the proposed method are validated through comparison with existing benchmark solutions.Subsequently,a comprehensive parametric study is carried out to examine the effects of geometric dimensions,material properties,foundation sizes,and boundary conditions(BCs)on the nonlinear vibration of 3D-FGSW plates.The findings of this work are expected to provide valuable insights for the design and manufacturing of advanced sandwich structures subjected to BL.
基金Funded by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China(No.2023YFB4204302)。
文摘Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the effects of different additives on mullite formation,as well as the microstructure and properties of the ceramic thin plates.Additionally,the study explored the toughening and strengthening mechanisms induced by the additives,providing a theoretical foundation for further optimizing the toughness of ceramic thin plates.The results showed that the D4 sample fired at 1220℃(with an addition of 20 wt% α-Al_(2)O_(3))exhibited the best performance,with a water absorption rate of 0.07%,apparent porosity of 0.18%,bulk density of 2.75 g·cm^(-3),firing shrinkage of 12.76%,bending strength reaching 101.93 MPa,and fracture toughness of 2.51 MPa·m^(1/2).As the amount ofα-Al_(2)O_(3) additive increased,the ceramic thin plates exhibited a greater abundance of short rod-like mullite and corundum grains,which were tightly packed together,forming a framework for the ceramic thin plates.This microstructure enhanced pathways for crack propagation,dispersed internal stresses,and increased fracture surface energy,resulting in significant improvements in both strength and fracture toughness of the ceramic thin plates.
基金financially supported by the Natural Science Foundation of Liaoning Province of China(2022-MS-109)the Key Research and Development Program of Liaoning Province(2023JH2/101800045)the Ministry of Science and Technology of the Peoples Republic of China(ZZ2021006).
文摘The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu-12Fe alloy strip with the thickness of 2.4 mm was successfully produced by twin-roll strip casting.The microstructure and properties of the Cu-12Fe alloy were tailored by cold rolling and aging treatment.The tensile strength of the as-cast strip is approximately 328 MPa and its elongation is 25%.The Fe phase randomly dispersed in the matrix,and the average size of Fe-rich phase is 2μm.Besides,enrichment of Fe phase is observed in the central layer of the strip,results in the formation of the“sandwich structure”.Moreover,the as-cast strip of Cu-12Fe was directly cold-rolled from 2.4 to 0.12 mm.The directly cold-rolled sample after aging at 450℃for 16 h(ProcessⅠ)shows excellent electrical conductivity of 69.5%IACS,the tensile strength and elongation are 513 MPa and 3.8%,the saturation magnetic flux density is 20.1 emu·g^(-1),and the coercive force is 25.2 Oe.In ProcessⅡ,the as-cast strip firstly cold-rolled to 1.2 mm,then aged at 500℃for 1.5 h,followed by cold rolling to 0.12 mm,finally aged at 450℃for 16 h.The sample after ProcessⅡshows the electrical conductivity of 66.3%IACS,the tensile strength of 533 MPa,an elongation of 3.5%,saturation magnetic flux density of 21.4 emu·g^(-1),and the coercive force of 22.3 Oe.
基金Project supported by the National Natural Science Foundation of China(Nos.12102321 and 52192633)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2025JCYBMS-050)。
文摘A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress.Introducing precurved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment,and even make the frequency higher with appropriate structural parameters.The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components.The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap.A simplified model is established for the local structure of the precurved component.The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models.The transmittance of flexural wave validates the effectiveness of the proposed design.
基金Project supported by the National Natural Science Foundation of China(No.12472062)。
文摘In this paper,a theoretical model is established for locally resonant plates with general resonators,and the corresponding governing equation is derived.The model provides a mathematical demonstration of the locally resonant effect,which contains two parts:the first part is induced by translation coupling,and the second part is induced by rotation coupling.The second part cannot be reflected by most existing theoretical models.The analytical solutions of the dynamic response are compared with the direct numerical simulation(DNS)results for two locally resonant plates with different resonator types,thereby validating the general applicability of the present model.The rotation coupling effect leads to the frequency-dependent effective rotational inertia density and anisotropic dispersion relation of the locally resonant plate,as well as the enhancement of the structural vibration suppression ability.
基金supported by National Natural Science Foundation of China(Grant 62573375)the Natural Science Foundation of Hebei Province(Grant F2024203038)+2 种基金the Science and Technology Research and Development Plan Project of Qinhuangdao City(Grant 202302B048)the Provincial Key Laboratory Performance Subsidy Project(Grant 22567612H)the Shandong Provincial Natural Science Foundation Youth Project(ZR2023QF044)。
文摘In response to the challenges of inadequate predictive accuracy and limited generalization capability in data-driven modeling for the mechanical properties of the cold-rolled strip steel,a predictive modeling method named RFR-WOA is developed based on random forest regression(RFR)and whale optimization algorithm(WOA).Firstly,using Pearson and Spearman correlation analysis and Gini coefficient importance ranking on an actual production dataset containing 37,878 samples,22 key variables are selected as model inputs from 112 variables that affect mechanical properties.Subsequently,an RFR-based predictive model for the mechanical properties of cold-rolled strip steel is constructed.Then,with the combination of the coefficient of determination(R^(2))and root mean square error as the optimization objective,the hyperparameters of RFR model are iteratively optimized using WOA,and better predictive effectiveness is obtained.Finally,the mechanical properties prediction model based on RFR-WOA is compared with models established using deep neural networks,convolutional neural networks,and other methods.The test results on 9469 samples of actual production data show that the model developed present has better predictive accuracy and generalization capability.
文摘In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.
基金supported by the National Natural Science Foundation of China(Nos.U2167202,12225504,12005276)the Natural Science Foundation of Shandong Province(No.ZR2024QA172)the Fundamental Research Funds of Shandong University.
文摘A 32-channel charge-sensitive amplifier(CSA)is designed for fast timing in the delay-line readout of a parallel plate avalanche counter(PPAC)array.It is realized on a PCB with operational amplifiers and other discrete components.Each channel consists of an integrator,a pole-zero cancellation net,and a linear amplification stage,which can be adapted to accommodate either positive or negative input signals.The RMS equivalent input noise charges are 3.3 fC,the conversion gains are approximately±2 mV∕fC,and the intrinsic time resolution reaches 32 ps.In the prototype PPAC application,the CSA performs as well as the commercial FTA820A amplifier,providing a position resolution as good as 0.17 mm,and exhibiting reliable stability during several hours of continuous data acquisition.
基金supported by the National Natural Science Foundation of China (42473063)Guike AD24010023, the Seventh Guangxi Zhuang Autonomous Region Bagui Scholars Program (to LIU Xijun)the Guangxi Natural Science Foundations of China (2025GXNSFBA069054)
文摘High-Mg andesites(HMAs)typically originate in subduction-related tectonic settings,including active continental margins and island arcs,and studies of HMAs can constrain the tectonic evolution of the South China Block and Paleo-Tethyan Ocean.This paper presents new chronological and geochemical data for high-Mg gabbroic diorites in the Funing area,southern South China.The gabbroic diorites yield ages of 254-249 Ma,and have moderate SiO2 contents(51.3%-57.8%),high MgO contents(4.6%-10.2%)and Mg^(#)values(52-75),enrichment in large-ion lithophile elements and light rare earth elements,and depletion in high-field-strength elements-collectively displaying geochemical signatures typical of sanukites.The gabbroic diorites have radiogenic initial Sr and Pb isotopic compositions,and negativeεNd(t)andεHf(t)values.These characteristics distinguish the Funing gabbroic diorites from subduction-related igneous rocks in the Paleo-Pacific tectonic domain.Instead,they are isotopically similar to HMAs and basalts along the Paleo-Tethys suture.We propose the high-Mg gabbroic diorites and basaltic andesites in Funing area share a common mantle source,linked to subduction and rollback of the Paleo-Tethyan plate beneath the South China Block,which triggered back-arc rifting and partial melting of the metasomatized lithospheric mantle during the Late Permian to Early Triassic.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
