To solve the potential inversion problem of the coupled system for one-way wave equations, the absorbing boundary conditions in the lateral direction are derived. The difference schemes are constructed and a layer str...To solve the potential inversion problem of the coupled system for one-way wave equations, the absorbing boundary conditions in the lateral direction are derived. The difference schemes are constructed and a layer stripping method is proposed. Some numerical experiments are presented.展开更多
The precursors organic cerium deposits were obtained by a stripping precipitation method from cerium-loaded P507 organic phase using oxalic acid as a precipitating agent and nano-sized ceria particles were prepared by...The precursors organic cerium deposits were obtained by a stripping precipitation method from cerium-loaded P507 organic phase using oxalic acid as a precipitating agent and nano-sized ceria particles were prepared by calcining the precursors at 500 ℃. The morphologies, phase structure of the precursors and ceria particles were characterized by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, X-ray diffraction （XRD）, thermogravimetric analysis （TG-DSC） and infrared spectroscopy analysis （FTIR）. The results indicated that the concentration of oxalic acid had a little impact on the morphology of the precursors, which was blocky-shape Ce2（C2O4）3：10H2O with a monoclinic lattice structure. With the volume ratio of organic phase and oxalic acid aqueous solution （aqueous phase） varied from 1：3 to 1：6, the morphologies of the precursors Ce2（C2O4）3· 10H2O precipitates gradually changed from inhomogeneous blocky-shape to uniform spherical particles. The precursors could be turned to CeO2 crystal particles with a fluorite structure by calcining, and the products ceria particles were similar in the size and morphology to the precursors.展开更多
A new method,the stream surface strip element method,for simulating the three-dimensional deformation of plate and strip rolling process was proposed.The rolling deformation zone was divided into a number of stream su...A new method,the stream surface strip element method,for simulating the three-dimensional deformation of plate and strip rolling process was proposed.The rolling deformation zone was divided into a number of stream surface(curved surface)strip elements along metal flow traces,and the stream surface strip elements were mapped into the corresponding plane strip elements for analysis and computation.The longitudinal distributions of the lateral displacement and the altitudinal displacement of metal were respectively constructed to be a quartic curve and a quadratic curve,of which the lateral distributions were expressed as the third-power spline function,and the altitudinal distributions were fitted in the quadratic curve.From the flow theory of plastic mechanics,the mathematical models of the three-dimensional deformations and stresses of the deformation zone were constructed.Compared with the streamline strip element method proposed by the first author of this paper,the stream surface strip element method takes into account the uneven distributions of stresses and deformations along altitudinal direction,and realizes the precise three-dimensional analysis and computation.The simulation example of continuous hot rolled strip indicates that the method and the model accord with facts and provide a new reliable engineering-computation method for the three-dimensional mechanics simulation of plate and strip rolling process.展开更多
A new model,called object model,for the simulation of cold roll-forming of tubes is presented.The model inherits the advantages of old models and is the embodiment of forming process that the strip is rolled step by s...A new model,called object model,for the simulation of cold roll-forming of tubes is presented.The model inherits the advantages of old models and is the embodiment of forming process that the strip is rolled step by step from feed rollers to last rolling pass.The elastic-plastic large deformation spline finite strip method based on updated Lagrangian method has been developed by improving the stiffness and transition matrix.Combined theory formulas and new analytical model,the forming process of a tube has been simulated successfully as an example.The analytical results are submitted and indicate that the proposed simulation method and new model are applicable.展开更多
The calculation precision and convergence speed of streamline strip element method are increased by (using) the method whose initial value of the exit lateral displacement is determined with strip element variation me...The calculation precision and convergence speed of streamline strip element method are increased by (using) the method whose initial value of the exit lateral displacement is determined with strip element variation method, and the accurate tension lateral distribution model is adopted based on the original third power spline function streamline strip element method. The basic theory of the strip element method is developed. The calculated results by the improved streamline strip element method and the original streamline strip element method are compared with the measured results, showing that the calculated results of the improved method are in good agreement with the measured results.展开更多
Double-layered graphene sheets （DLGSs） can be applied to the development of a new generation of nanomechanical sensors due to their unique physical properties. A rectangular DLGS with a nanoparticle randomly located...Double-layered graphene sheets （DLGSs） can be applied to the development of a new generation of nanomechanical sensors due to their unique physical properties. A rectangular DLGS with a nanoparticle randomly located in the upper sheet is modeled as two nonlocal Kirchhoff plates connected by van der Waals forces. The Galerkin strip transfer function method which is a semi-analytical method is developed to compute the natural frequencies of the mass- plate vibrating system. It can give exact closed-form solutions along the longitudinal direction of the strip. The results obtained from the semi-analytical method are compared with the previous ones, and the differences between the single-layered graphene sheet （SLGS） and the DLGS mass sensors are also investigated. The results demonstrate the similarity of the in-phase mode between the SLGS and DLGS mass sensors. The sensitivity of the DLGS mass sensor can be increased by decreasing the nonlocal parameter, moving the attached nanoparticle closer to the DLGS center and making the DLGS smaller. These conclusions are helpful for the design and application of graphene-sheet-based resonators as nano-mass sensors.展开更多
Using the method of characteristics,the bearing capacity for a strip footing is analyzed.The method of characteristics leads to an exact true limit load when the calculations of the three terms in the bearing capacity...Using the method of characteristics,the bearing capacity for a strip footing is analyzed.The method of characteristics leads to an exact true limit load when the calculations of the three terms in the bearing capacity formula are consistent with one collapse mechanism and the soil satisfies the associated flow rule.At the same time,the method of characteristics avoids the assumption of arbitrary slip surfaces,and produces zones within which equilibrium and plastic yield are simultaneously satisfied for given boundary stresses.The exact solution without superposition approximation can still be expressed by Terzaghi＇s equation of bearing capacity,in which the bearing capacity factor N γλ is dependent on the dimensionless parameter λ and the friction angle φ.The influence of groundwater on the bearing capacity of the shallow strip footing is considered,which indicates that when the groundwater effect is taken into account,the error induced by the superposition approximation can be reduced as compared with dry soil condition.The results are presented in the form of charts which give the modified value（Nwγλc /Nγλc） of bearing capacity factor.Finally,an approximated analytical expression,which provides results in close agreement with those obtained by numerical analysis in this paper,has been suggested for practical application purposes.展开更多
Dynamic response of beam-like structures to moving vehicles has been extensively studied. However, the study on dynamic response of plates to moving vehicles has so far received but scant attention. A plate-vehicle st...Dynamic response of beam-like structures to moving vehicles has been extensively studied. However, the study on dynamic response of plates to moving vehicles has so far received but scant attention. A plate-vehicle strip for simulating the interaction between a rectangular plate and moving vehicles was described. For the portion of strips that are in direct contact with the moving vehicles, the plate-vehicle strips were employed. Conventional plate finite strips were used to model the portion of strips that are not directly under the action of moving vehicles. In the analysis, each moving vehicle is idealized as a one-foot dynamic system with tire unsprung mass and sprund mass interconnected by a spring and a dashpot. The numerical results obtained from the proposed method agree well with available results.展开更多
As the traditional forging process has many problems such as low efficiency, high consumption of material and energy, large cylindrical shell rolling is introduced. Large cylindrical shell rolling is a typical rotary ...As the traditional forging process has many problems such as low efficiency, high consumption of material and energy, large cylindrical shell rolling is introduced. Large cylindrical shell rolling is a typical rotary forming technology, and the upper and lower rolls have different radii and speeds. To quickly predict the three-dimensional stresses and eliminate fishtail defect, an improved strip layer method is developed, in which the asymmetry of the upper and lower rolls, non-uniform deformation and stress, as well as the asymmetrical spread on the end surface are considered. The deformation zone is divided into a certain number of layers and strips along the thickness and width, respectively. The transverse displacement model is constructed by polynomial function, in order to increase the computation speed greatly. From the metal plastic mechanics principle, the three-dimensional stress models are established. The genetic algorithm is used for optimization calculation in an industrial experiment example. The results show that the rolling pressure, the normal stresses, the upper and lower friction stress distributions are not similar with those of a general plate rolling. There are two relative maximum values in rolling pressure distribution. The upper and lower longitudinal friction stresses change direction nearby the upper and lower neutral points, respectively. The fishtail profile of spread on the end surface is predicted satisfactorily. The reduction could be helpful to eliminate fishtail defect. The large cylindrical shell rolling example illustrates the calculation results acquired rapidly are good agreements with the finite element simulation and experimental values of previous study. A highly effective and reliable three-dimensional simulation method is proposed for large cylindrical shell rolling and other asymmetrical rolling.展开更多
The paper presents two methods for the formulation of free vibration analysis of collecting electrodes of precipitators.The first,called the hybrid finite element method, combines the finit element method used for cal...The paper presents two methods for the formulation of free vibration analysis of collecting electrodes of precipitators.The first,called the hybrid finite element method, combines the finit element method used for calculations of spring deformations with the rigid finite element method used to reflect mass and geometrical features,which is called the hybrid finite element method.As a result,a model with a diagonal mass matrix is obtained.Due to a specific geometry of the electrodes,which are long plates of complicated shapes,the second method proposed is the strip method which is a semi-analytical method.The strip method allows us to formulate the equations of motion with a considerably smaller number of generalized coordinates.Results of numerical calculations obtained by both methods are compared with those obtained using commercial software like ANSYS and ABAQUS.Good compatibility of results is achieved.展开更多
In this paper,such a new lateral displacement function is proposed that the lateral flow velocity is con- tinuous at the entry and the exit of deformation zone.A new kind of finite strip method—the third power B-spli...In this paper,such a new lateral displacement function is proposed that the lateral flow velocity is con- tinuous at the entry and the exit of deformation zone.A new kind of finite strip method—the third power B-spline finite strip method—is put forward to simulate strip rolling process.Front and back tension stresses are formulated.The computed results of the transverse distributions of the front and back tension stresses are close to the experimental results.The paper lays a foundation for further analysing the three-dimensional stresses and deformations of strip rolling.展开更多
The computation model of shape and crown on 4-high CVC mill was established by combining the stream surface strip element method for analyzing three-dimensional plastic deformation of strip and the influence coefficie...The computation model of shape and crown on 4-high CVC mill was established by combining the stream surface strip element method for analyzing three-dimensional plastic deformation of strip and the influence coefficient method for elastic deformation of rolls, and the simulation of the shape and crown control on 4-high CVC hot strip mill was conducted. The simulated results indicate that the influence of the shifting of CVC work roll on shape and crown is very large, and the shifting of work roll can be used to preset shape and crown. The influence of the bending force of work roll on shape and crown is smaller, and it is suitable to use the bending force of work roll for shape and crown adjustment on line. With the increase of strip width, the exit crown of strip increases firstly and decreases then, and the roll gap becomes smoother increasingly. Meanwhile, the transverse difference of front tension stress decreases firstly and increases then.展开更多
A numerical method of integration of Green's functions of strip element method (SEM) is proposed The response of ultrasonic source generated by a transducer on the surface of a multi ply composite plate contain...A numerical method of integration of Green's functions of strip element method (SEM) is proposed The response of ultrasonic source generated by a transducer on the surface of a multi ply composite plate containing a delamination is analyzed by the use of SEM The numerical results show that the scanning features of the ultrasonic waves may be used to identify the delamination inside the composite plate.展开更多
Bubble functions are finite element modes that are zero on the boundary of the element but nonzero at the other point. The present paper adds bubble functions to the ordinary Complex Finite Strip Method(CFSM) to calcu...Bubble functions are finite element modes that are zero on the boundary of the element but nonzero at the other point. The present paper adds bubble functions to the ordinary Complex Finite Strip Method(CFSM) to calculate the elastic local buckling stress of plates and plate assemblies. The results indicate that the use of bubble functions greatly improves the convergence of the Finite Strip Method(FSM) in terms of strip subdivision, and leads to much smaller storage required for the structure stiffness and stability matrices. Numerical examples are given, including plates and plate structures subjected to a combination of longitudinal and transverse compression, bending and shear. This study illustrates the power of bubble functions in solving stability problems of plates and plate structures.展开更多
To simulate the process of cold roll-forming process, a new method isadopted. The theoretical foundation of this method is an elastic-plastic large deformation splinefinite strip method based on object-oriented progra...To simulate the process of cold roll-forming process, a new method isadopted. The theoretical foundation of this method is an elastic-plastic large deformation splinefinite strip method based on object-oriented programming. Combined with the computer graphicstechnology, the visual simulation of cold roll-forming is completed and the system is established.By analyzing common channel steel, the process is shown and explained including theory method, modeland result display. So the simulation system is already a kind of mature and effective tool toanalyze the process of cold roll forming.展开更多
The three-dimensional plastic deformations of strip are analyzed using the stream surface strip element method, the elastic deformations of rolls are analyzed using the influence coefficient method, the analyzing and ...The three-dimensional plastic deformations of strip are analyzed using the stream surface strip element method, the elastic deformations of rolls are analyzed using the influence coefficient method, the analyzing and computing model of shape and crown of 4-high mill was established by combining them, and the rolling process of 1660 mm hot strip continuous mills was simulated. The simulated results tally well with the experimental results. The modei and the method for simulation of shape analysis and control of hot strip mills were provided.展开更多
Based on the continuity of the derivatives of the Non-Uniform Rational B-Splines (NURBS) curve and the Jaumann strain measure, the present paper adopted the position coordinates of the control points as the degrees of...Based on the continuity of the derivatives of the Non-Uniform Rational B-Splines (NURBS) curve and the Jaumann strain measure, the present paper adopted the position coordinates of the control points as the degrees of freedom and developed a planar rotation-free Euler-Bernoulli beam element for isogeometric analysis, where the derivatives of the field variables with respect to the arc-length were expressed as the sum of the weighted sum of the position coordinates of the control points, and the NURBS basis functions were used as the weight functions. Furthermore, the concept of bending strip was used to involve the rigid connection between multiple patches. Several typical examples with geometric nonlinearities were used to demonstrate the accuracy and effectiveness of the proposed algorithm. The presented formulation fully accounts for the geometric nonlinearities and can be used to study the snap-through and snap-back phenomena of flexible beams.展开更多
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U. L. method) was established to simulate roll f...The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U. L. method) was established to simulate roll forming process of channel section with outer edge. The deformation characteristics of strip was analyzed, and the three-dimensional displacement field, strain field and stress field of deformed strip were got. The calculation example proves that the peak transverse pressing membrane strain is on the corner part of the deformed strip, and the peak longitudinal stretching strain is on the outer edge part of the deformed strip in front of rolls. In addition, the transverse deformation of the deformed strip is principal, and the longitudinal deformation is small.展开更多
Currently,the design practice of highway bridges around the world are moving towards limit states design,a reliability-based design procedure.Canadian Highway Bridge Design Code(CHBDC)is the first design code entirely...Currently,the design practice of highway bridges around the world are moving towards limit states design,a reliability-based design procedure.Canadian Highway Bridge Design Code(CHBDC)is the first design code entirely developed based on limit states design philosophy,including foundations and FRP components.However,reliability of a structure decreases in service due to environmental attacks and material deterioration such as fatigue,corrosion and many other reasons.Therefore,the structure should be inspected periodically,and the reliability of the structure should be evaluated according to its age and field data.If its reliability is reduced to a certain level,a repair should be scheduled as well as some preventive maintenance measures should be implemented to prevent further deterioration.Recently,many research works have been conducted to investigate reliability-deterioration mechanisms for each type of infrastructure and its components,optimize the inspection and maintenance strategy,predict remaining service life,estimate its life cycle cost.This paper is focused on the study of reliability-deterioration mechanisms of slab on steel girder bridges due to fatigue and corrosion of steel girders as well as corrosion of reinforcement in the deck slab.Examples will also be given to illustrate the proposed life cycle management strategy for composite slab on steel girder bridges.展开更多
The principle, formula and determination of internal stresses of metal multilayer composite coatings by means of the bending strip method were studied. Using this method, internal stresses of ion-plated metal multilay...The principle, formula and determination of internal stresses of metal multilayer composite coatings by means of the bending strip method were studied. Using this method, internal stresses of ion-plated metal multilayer composite coatings and thick monolayer coating of aluminium bronze, stainless steel and nickel-iron alloy were determined. The reason of decrement in internal stresses of multilayer composite coatings was discussed.展开更多
文摘To solve the potential inversion problem of the coupled system for one-way wave equations, the absorbing boundary conditions in the lateral direction are derived. The difference schemes are constructed and a layer stripping method is proposed. Some numerical experiments are presented.
基金Project supported by the National High Technology Research and Development Program of China (863 Program) (2010AA03A407)Project of Beijing Educational Committee (PXM2012_014204_00_000160)
文摘The precursors organic cerium deposits were obtained by a stripping precipitation method from cerium-loaded P507 organic phase using oxalic acid as a precipitating agent and nano-sized ceria particles were prepared by calcining the precursors at 500 ℃. The morphologies, phase structure of the precursors and ceria particles were characterized by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, X-ray diffraction （XRD）, thermogravimetric analysis （TG-DSC） and infrared spectroscopy analysis （FTIR）. The results indicated that the concentration of oxalic acid had a little impact on the morphology of the precursors, which was blocky-shape Ce2（C2O4）3：10H2O with a monoclinic lattice structure. With the volume ratio of organic phase and oxalic acid aqueous solution （aqueous phase） varied from 1：3 to 1：6, the morphologies of the precursors Ce2（C2O4）3· 10H2O precipitates gradually changed from inhomogeneous blocky-shape to uniform spherical particles. The precursors could be turned to CeO2 crystal particles with a fluorite structure by calcining, and the products ceria particles were similar in the size and morphology to the precursors.
基金Sponsored by National Natural Science Foundation of China(50175095)Provincial Natural Science Foundation of Hebei of China(502173)
文摘A new method,the stream surface strip element method,for simulating the three-dimensional deformation of plate and strip rolling process was proposed.The rolling deformation zone was divided into a number of stream surface(curved surface)strip elements along metal flow traces,and the stream surface strip elements were mapped into the corresponding plane strip elements for analysis and computation.The longitudinal distributions of the lateral displacement and the altitudinal displacement of metal were respectively constructed to be a quartic curve and a quadratic curve,of which the lateral distributions were expressed as the third-power spline function,and the altitudinal distributions were fitted in the quadratic curve.From the flow theory of plastic mechanics,the mathematical models of the three-dimensional deformations and stresses of the deformation zone were constructed.Compared with the streamline strip element method proposed by the first author of this paper,the stream surface strip element method takes into account the uneven distributions of stresses and deformations along altitudinal direction,and realizes the precise three-dimensional analysis and computation.The simulation example of continuous hot rolled strip indicates that the method and the model accord with facts and provide a new reliable engineering-computation method for the three-dimensional mechanics simulation of plate and strip rolling process.
基金the National Natural Science Foundation of China (No. 50375135)the Talent Foundation of Beijing Jiaotong University (No. 2003RC059)
文摘A new model,called object model,for the simulation of cold roll-forming of tubes is presented.The model inherits the advantages of old models and is the embodiment of forming process that the strip is rolled step by step from feed rollers to last rolling pass.The elastic-plastic large deformation spline finite strip method based on updated Lagrangian method has been developed by improving the stiffness and transition matrix.Combined theory formulas and new analytical model,the forming process of a tube has been simulated successfully as an example.The analytical results are submitted and indicate that the proposed simulation method and new model are applicable.
文摘The calculation precision and convergence speed of streamline strip element method are increased by (using) the method whose initial value of the exit lateral displacement is determined with strip element variation method, and the accurate tension lateral distribution model is adopted based on the original third power spline function streamline strip element method. The basic theory of the strip element method is developed. The calculated results by the improved streamline strip element method and the original streamline strip element method are compared with the measured results, showing that the calculated results of the improved method are in good agreement with the measured results.
基金supported by the National Natural Science Foundation of China(Grant No.11302254)
文摘Double-layered graphene sheets （DLGSs） can be applied to the development of a new generation of nanomechanical sensors due to their unique physical properties. A rectangular DLGS with a nanoparticle randomly located in the upper sheet is modeled as two nonlocal Kirchhoff plates connected by van der Waals forces. The Galerkin strip transfer function method which is a semi-analytical method is developed to compute the natural frequencies of the mass- plate vibrating system. It can give exact closed-form solutions along the longitudinal direction of the strip. The results obtained from the semi-analytical method are compared with the previous ones, and the differences between the single-layered graphene sheet （SLGS） and the DLGS mass sensors are also investigated. The results demonstrate the similarity of the in-phase mode between the SLGS and DLGS mass sensors. The sensitivity of the DLGS mass sensor can be increased by decreasing the nonlocal parameter, moving the attached nanoparticle closer to the DLGS center and making the DLGS smaller. These conclusions are helpful for the design and application of graphene-sheet-based resonators as nano-mass sensors.
文摘Using the method of characteristics,the bearing capacity for a strip footing is analyzed.The method of characteristics leads to an exact true limit load when the calculations of the three terms in the bearing capacity formula are consistent with one collapse mechanism and the soil satisfies the associated flow rule.At the same time,the method of characteristics avoids the assumption of arbitrary slip surfaces,and produces zones within which equilibrium and plastic yield are simultaneously satisfied for given boundary stresses.The exact solution without superposition approximation can still be expressed by Terzaghi＇s equation of bearing capacity,in which the bearing capacity factor N γλ is dependent on the dimensionless parameter λ and the friction angle φ.The influence of groundwater on the bearing capacity of the shallow strip footing is considered,which indicates that when the groundwater effect is taken into account,the error induced by the superposition approximation can be reduced as compared with dry soil condition.The results are presented in the form of charts which give the modified value（Nwγλc /Nγλc） of bearing capacity factor.Finally,an approximated analytical expression,which provides results in close agreement with those obtained by numerical analysis in this paper,has been suggested for practical application purposes.
文摘Dynamic response of beam-like structures to moving vehicles has been extensively studied. However, the study on dynamic response of plates to moving vehicles has so far received but scant attention. A plate-vehicle strip for simulating the interaction between a rectangular plate and moving vehicles was described. For the portion of strips that are in direct contact with the moving vehicles, the plate-vehicle strips were employed. Conventional plate finite strips were used to model the portion of strips that are not directly under the action of moving vehicles. In the analysis, each moving vehicle is idealized as a one-foot dynamic system with tire unsprung mass and sprund mass interconnected by a spring and a dashpot. The numerical results obtained from the proposed method agree well with available results.
基金Supported by National Science and Technology Major Project of China(Grant No.2011ZX04002-101)National Science and Technology Support Plan of China(Grant No.2011BAF15B02)National Natural Science Foundation of China(Grant No.51305388)
文摘As the traditional forging process has many problems such as low efficiency, high consumption of material and energy, large cylindrical shell rolling is introduced. Large cylindrical shell rolling is a typical rotary forming technology, and the upper and lower rolls have different radii and speeds. To quickly predict the three-dimensional stresses and eliminate fishtail defect, an improved strip layer method is developed, in which the asymmetry of the upper and lower rolls, non-uniform deformation and stress, as well as the asymmetrical spread on the end surface are considered. The deformation zone is divided into a certain number of layers and strips along the thickness and width, respectively. The transverse displacement model is constructed by polynomial function, in order to increase the computation speed greatly. From the metal plastic mechanics principle, the three-dimensional stress models are established. The genetic algorithm is used for optimization calculation in an industrial experiment example. The results show that the rolling pressure, the normal stresses, the upper and lower friction stress distributions are not similar with those of a general plate rolling. There are two relative maximum values in rolling pressure distribution. The upper and lower longitudinal friction stresses change direction nearby the upper and lower neutral points, respectively. The fishtail profile of spread on the end surface is predicted satisfactorily. The reduction could be helpful to eliminate fishtail defect. The large cylindrical shell rolling example illustrates the calculation results acquired rapidly are good agreements with the finite element simulation and experimental values of previous study. A highly effective and reliable three-dimensional simulation method is proposed for large cylindrical shell rolling and other asymmetrical rolling.
基金Research is financed from the project NR03-0036-04/2008
文摘The paper presents two methods for the formulation of free vibration analysis of collecting electrodes of precipitators.The first,called the hybrid finite element method, combines the finit element method used for calculations of spring deformations with the rigid finite element method used to reflect mass and geometrical features,which is called the hybrid finite element method.As a result,a model with a diagonal mass matrix is obtained.Due to a specific geometry of the electrodes,which are long plates of complicated shapes,the second method proposed is the strip method which is a semi-analytical method.The strip method allows us to formulate the equations of motion with a considerably smaller number of generalized coordinates.Results of numerical calculations obtained by both methods are compared with those obtained using commercial software like ANSYS and ABAQUS.Good compatibility of results is achieved.
文摘In this paper,such a new lateral displacement function is proposed that the lateral flow velocity is con- tinuous at the entry and the exit of deformation zone.A new kind of finite strip method—the third power B-spline finite strip method—is put forward to simulate strip rolling process.Front and back tension stresses are formulated.The computed results of the transverse distributions of the front and back tension stresses are close to the experimental results.The paper lays a foundation for further analysing the three-dimensional stresses and deformations of strip rolling.
文摘The computation model of shape and crown on 4-high CVC mill was established by combining the stream surface strip element method for analyzing three-dimensional plastic deformation of strip and the influence coefficient method for elastic deformation of rolls, and the simulation of the shape and crown control on 4-high CVC hot strip mill was conducted. The simulated results indicate that the influence of the shifting of CVC work roll on shape and crown is very large, and the shifting of work roll can be used to preset shape and crown. The influence of the bending force of work roll on shape and crown is smaller, and it is suitable to use the bending force of work roll for shape and crown adjustment on line. With the increase of strip width, the exit crown of strip increases firstly and decreases then, and the roll gap becomes smoother increasingly. Meanwhile, the transverse difference of front tension stress decreases firstly and increases then.
基金This project is supported by National Natural Science Foundation of China(No19872011).
文摘A numerical method of integration of Green's functions of strip element method (SEM) is proposed The response of ultrasonic source generated by a transducer on the surface of a multi ply composite plate containing a delamination is analyzed by the use of SEM The numerical results show that the scanning features of the ultrasonic waves may be used to identify the delamination inside the composite plate.
基金the Natural Science Foundation of Jiangxi Province of Chinathe Basic Theory Research Foundation of Nanchang University
文摘Bubble functions are finite element modes that are zero on the boundary of the element but nonzero at the other point. The present paper adds bubble functions to the ordinary Complex Finite Strip Method(CFSM) to calculate the elastic local buckling stress of plates and plate assemblies. The results indicate that the use of bubble functions greatly improves the convergence of the Finite Strip Method(FSM) in terms of strip subdivision, and leads to much smaller storage required for the structure stiffness and stability matrices. Numerical examples are given, including plates and plate structures subjected to a combination of longitudinal and transverse compression, bending and shear. This study illustrates the power of bubble functions in solving stability problems of plates and plate structures.
基金This project is supported by Provincial Natural Science Foundation of Hebei (No.502214).
文摘To simulate the process of cold roll-forming process, a new method isadopted. The theoretical foundation of this method is an elastic-plastic large deformation splinefinite strip method based on object-oriented programming. Combined with the computer graphicstechnology, the visual simulation of cold roll-forming is completed and the system is established.By analyzing common channel steel, the process is shown and explained including theory method, modeland result display. So the simulation system is already a kind of mature and effective tool toanalyze the process of cold roll forming.
基金This work was supported by the National Natural Science Foundation of China,No.50175095(Theory system and mechanism model of shape control of high precision plate and strip mills) 50374058(Stream surface strip element method and its application in shape control of hot rolling plate and strip).
文摘The three-dimensional plastic deformations of strip are analyzed using the stream surface strip element method, the elastic deformations of rolls are analyzed using the influence coefficient method, the analyzing and computing model of shape and crown of 4-high mill was established by combining them, and the rolling process of 1660 mm hot strip continuous mills was simulated. The simulated results tally well with the experimental results. The modei and the method for simulation of shape analysis and control of hot strip mills were provided.
基金Project supported by the National Natural Science Foundation of China(Nos.11572132 and 11572137)
文摘Based on the continuity of the derivatives of the Non-Uniform Rational B-Splines (NURBS) curve and the Jaumann strain measure, the present paper adopted the position coordinates of the control points as the degrees of freedom and developed a planar rotation-free Euler-Bernoulli beam element for isogeometric analysis, where the derivatives of the field variables with respect to the arc-length were expressed as the sum of the weighted sum of the position coordinates of the control points, and the NURBS basis functions were used as the weight functions. Furthermore, the concept of bending strip was used to involve the rigid connection between multiple patches. Several typical examples with geometric nonlinearities were used to demonstrate the accuracy and effectiveness of the proposed algorithm. The presented formulation fully accounts for the geometric nonlinearities and can be used to study the snap-through and snap-back phenomena of flexible beams.
文摘The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U. L. method) was established to simulate roll forming process of channel section with outer edge. The deformation characteristics of strip was analyzed, and the three-dimensional displacement field, strain field and stress field of deformed strip were got. The calculation example proves that the peak transverse pressing membrane strain is on the corner part of the deformed strip, and the peak longitudinal stretching strain is on the outer edge part of the deformed strip in front of rolls. In addition, the transverse deformation of the deformed strip is principal, and the longitudinal deformation is small.
文摘Currently,the design practice of highway bridges around the world are moving towards limit states design,a reliability-based design procedure.Canadian Highway Bridge Design Code(CHBDC)is the first design code entirely developed based on limit states design philosophy,including foundations and FRP components.However,reliability of a structure decreases in service due to environmental attacks and material deterioration such as fatigue,corrosion and many other reasons.Therefore,the structure should be inspected periodically,and the reliability of the structure should be evaluated according to its age and field data.If its reliability is reduced to a certain level,a repair should be scheduled as well as some preventive maintenance measures should be implemented to prevent further deterioration.Recently,many research works have been conducted to investigate reliability-deterioration mechanisms for each type of infrastructure and its components,optimize the inspection and maintenance strategy,predict remaining service life,estimate its life cycle cost.This paper is focused on the study of reliability-deterioration mechanisms of slab on steel girder bridges due to fatigue and corrosion of steel girders as well as corrosion of reinforcement in the deck slab.Examples will also be given to illustrate the proposed life cycle management strategy for composite slab on steel girder bridges.
文摘The principle, formula and determination of internal stresses of metal multilayer composite coatings by means of the bending strip method were studied. Using this method, internal stresses of ion-plated metal multilayer composite coatings and thick monolayer coating of aluminium bronze, stainless steel and nickel-iron alloy were determined. The reason of decrement in internal stresses of multilayer composite coatings was discussed.
