Coriolis effects,encompassing the dilative,compressive,and deflective manifestations,constitute pivotal considerations in the centrifugal modelling of high-speed granular run-out processes.Notably,under the deflective...Coriolis effects,encompassing the dilative,compressive,and deflective manifestations,constitute pivotal considerations in the centrifugal modelling of high-speed granular run-out processes.Notably,under the deflective Coriolis condition,the velocity component parallel to the rotational axis exerts no influence on the magnitude of Coriolis acceleration.This circumstance implies a potential mitigation of the Coriolis force's deflective impact.Regrettably,extant investigations predominantly emphasize the dilative and compressive Coriolis effects,largely neglecting the pragmatic import of the deflective Coriolis condition.In pursuit of this gap,a series of discrete element method(DEM)simulations have been conducted to scrutinize the feasibility of centrifugal modelling for dry granular run-out processes under deflective Coriolis conditions.The findings concerning the deflective Coriolis effect reveal a consistent rise in the run-out distance by 2%–16%,a modest increase in bulk flow velocity of under 4%,and a slight elevation in average flow depth by no more than 25%.These alterations display smaller dependence on the specific testing conditions due to the granular flow undergoing dual deflections in opposing directions.This underscores the significance and utility of the deflective Coriolis condition.Notably,the anticipated reduction in error in predicting the final run-out distance is substantial,potentially reaching a 150%improvement compared to predictions made under the dilative and compressive Coriolis conditions.Therefore,the deflective Coriolis condition is advised when the final run-out distance of the granular flow is the main concern.To mitigate the impact of Coriolis acceleration,a greater initial height of the granular column is recommended,with a height/width ratio exceeding 1,as the basal friction of the granular material plays a crucial role in mitigating the deflective Coriolis effect.For more transverse-uniform flow properties,the width of the granular column should be as large as possible.展开更多
On 12th August 2015,a massive rapid long run-out rock landslide occurred in the Shanyang Vanadium Mine in Shaanxi Province,China,which claimed the lives of 65 miners.No heavy rainfalls,earthquakes,and mining blasts we...On 12th August 2015,a massive rapid long run-out rock landslide occurred in the Shanyang Vanadium Mine in Shaanxi Province,China,which claimed the lives of 65 miners.No heavy rainfalls,earthquakes,and mining blasts were recorded before the incident.Therefore,the failure mechanism and the cause of the long run-out movement are always in arguments.In this paper,we conducted a detailed field investigation,laboratory tests,block theory analysis,and numerical simulation to investigate the failure and long run-out mechanisms of the landslide.The field investigation results show that the source material of the rock landslide is a huge dolomite wedge block bedding on siliceous shale layers.Uniaxial compression tests indicate that the uniaxial compression strength of the intact dolomite is 130-140MPa and the dolomite shows a brittle failure mode.Due to the progressive downward erosion of the gully,the dolomite rock bridge at the slope toe became thinner.As the compression stress in the dolomite bridge increased to surpass its strength,the brittle failure of the bridge occurred.Then huge potential energy was released following the disintegration of the landslide,which led to the high acceleration of this rock landslide.The 3D discrete element simulation results suggest that the low intergranular friction contributes to the long run-out movement of this rock landslide.展开更多
The peak ground acceleration （PGA）, the volume of a sliding mass V, the height of a mountain HL and the slope angle θ of a mountain are four important parameters affecting the horizontal run-out distance of a lands...The peak ground acceleration （PGA）, the volume of a sliding mass V, the height of a mountain HL and the slope angle θ of a mountain are four important parameters affecting the horizontal run-out distance of a landslide L. Correlations among them are studied statistically based on field investigations from 67 landslides triggered by the ground shaking and other factors during the Wenchuan earthquake, and then a prediction model for horizontal run-out distance L is developed in this study. This model gives due consideration to the implications of the above four parameters on the horizontal run-out distance L and the validity of the model is verified by the Donghekou and Magong Woqian landslides. At the same time, the advantages of the model are shown by comparing it with two other common prediction methods. The major findings drawn from the analyses and comparisons are： （1） an exponential relationship exists between L and log V, L and log HL, L and log PGA separately, but a negative exponential relationship exists between L and log tan0, which agrees with the statistical results; and （2） according to the analysis results of the relative relationship between the height of a mountain （H） and the place where the landslides occur, the probabilities at distances of2H/3-H, H/3-2H/3, and O-H/3 are 70.8%, 15.4%, and 13.8%, respectively, revealing that most landslides occurred at a distance of H/2-H. This prediction model can provide an effective technical support for the prevention and mitigation of landslide hazards.展开更多
In order to meet the severe requirements of market and reduce production costs of high quality steels,advanced run-out table cooling based on ultra fast cooling(UFC) and laminar cooling(LC) was proposed and applied to...In order to meet the severe requirements of market and reduce production costs of high quality steels,advanced run-out table cooling based on ultra fast cooling(UFC) and laminar cooling(LC) was proposed and applied to industrial production.Cooling mechanism of UFC and LC was introduced first,and then the control system and control models were described.By using UFC and LC,low-cost Q345B strips had been produced in a large scale,and industrial trials of producing low-cost dual phase strips were completed successfully.Application results show that the ultra fast cooling is uniform along the strip width and length,and does not affect the flatness of strips.The run-out table cooling system runs stably with a high precision,and makes it possible for the user to develop more high quality steels with low costs.展开更多
In this paper, a multi-delay milling system considering helix angle and run-out effects is firstly established. An exponential cutting force model is used to model the interaction between a work-piece and a cutting to...In this paper, a multi-delay milling system considering helix angle and run-out effects is firstly established. An exponential cutting force model is used to model the interaction between a work-piece and a cutting tool, and a new approach is presented for accurately calibrating exponential cutting force coefficients and cutter run-out parameters. Furthermore, based on an implicit multi-step Adams formula and an improved precise time-integration algorithm, a novel stability prediction method is proposed to predict the stability of the system. The involved time delay term and periodic coefficient term are integrated as a comprehensive state term in the integral response which is approximated by the Adams formula. Then, a Floquet transition matrix with an arbitraryorder form is constructed by using a series of matrix multiplication, and the stability of the system is determined by the Floquet theory. Compared to classical semi-discretization methods and fulldiscretization methods, the developed method shows a good performance in convergence, efficiency,accuracy, and multi-order complexity. A series of cutting tests is further carried out to validate the practicability and effectiveness of the proposed method. The results show that the calibration process needs a time of less than 5 min, and the stability prediction method is effective.展开更多
Non-uniformity of temperature distribution across strip width direction is the ultimate reason why the flatness defect occurs on the strip after cooling process although the strip is flat at the exit of finishing mill...Non-uniformity of temperature distribution across strip width direction is the ultimate reason why the flatness defect occurs on the strip after cooling process although the strip is flat at the exit of finishing mill.One thermal , microstructural and mechanical coupling analysis model for predicting flatness change of steel strip during the run-out table cooling process was established using ABAQUS finite element software.K Esaka phase transformation kinetics model was employed to calculate the phase transformation , and coupled with temperature calculation using the user subroutine program HETVAL.Elasto-plasticity constitutive equations of steel material , in which conventional elastic and plastic strains , thermal strain , phase transformation strain and transformation induced plastic strain were considered , were derived and programmed in the user subroutine program UMAT.The conclusion that flatness of steel strip will develop to edge wave defect under the functions of the differential thermal and microstructural behaviors across strip width during the run-out table cooling procedure was acquired through the analysis results of this model.Calculation results of this analysis model agree well with the actual measurements and observation.展开更多
Mathematical models are been proposed to simulate the thermal and metallurgical behaviors of the strip occtLrring on the run-out table （ROT） in a hot strip mill. A variational method is utilized for the discretizati...Mathematical models are been proposed to simulate the thermal and metallurgical behaviors of the strip occtLrring on the run-out table （ROT） in a hot strip mill. A variational method is utilized for the discretization of the governing transient conduction-convection equation, with heat transfer coefficients adaptively determined by the actual mill data. To consider the thermal effect of phase transformation during cooling, a constitutive equation for describing austenite decomposition kinetics of steel in air and water cooling zones is coupled with the heat transfer model. As the basic required inputs in the numerical simulations, thermal material properties are experimentally measured for three carbon steels and the least squares method is used to statistically derive regression models for the properties, including specific heat and thermal conductivity. The numerical simulation and experimental results show that the setup accuracy of the temperature prediction system of ROT is effectively improved.展开更多
Combined with real engineering, we mainly study the stability of the equilibrium state at the coordinate center of an orthotropic stringer shell system, and the approximate analytic periodic motion is presented around...Combined with real engineering, we mainly study the stability of the equilibrium state at the coordinate center of an orthotropic stringer shell system, and the approximate analytic periodic motion is presented around the studied equilibrium state. In addition the rationality of the obtained results is verified by numerical simulation. Furthermore we found that there are actually only four kinds of phase portrait of this type of shell.展开更多
Three types of composite stringers were impacted from two different directions.Relationships between impact energy and visible defect length were found.The critical impact energy corresponding to barely visible impact...Three types of composite stringers were impacted from two different directions.Relationships between impact energy and visible defect length were found.The critical impact energy corresponding to barely visible impact damage(BVID)of each stringer was determined.Specimens with BVID were then compressed to obtain the residual strength.Experimental results showed that for all types of stringers,the critical energy of in-plane impact is always much lower than out-plane ones.In-plane impact causes much more decrement of stringers'bearing capacity than outplane impact.For both impact directions,I-stringers own the highest defect detectability,T-stringers come second.Meanwhile,I-stringers own the better residual strength ratio than I-stringers and I-stringers.Synthetic considering impact defect detectability and residual bearing capacity after impact,T-stringers own the best compression-afterimpact(CAI)behaviors.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42120104008 and 42307214)the Postdoctoral Fellowship Program of CPSF(Grant No.GZB20230620).
文摘Coriolis effects,encompassing the dilative,compressive,and deflective manifestations,constitute pivotal considerations in the centrifugal modelling of high-speed granular run-out processes.Notably,under the deflective Coriolis condition,the velocity component parallel to the rotational axis exerts no influence on the magnitude of Coriolis acceleration.This circumstance implies a potential mitigation of the Coriolis force's deflective impact.Regrettably,extant investigations predominantly emphasize the dilative and compressive Coriolis effects,largely neglecting the pragmatic import of the deflective Coriolis condition.In pursuit of this gap,a series of discrete element method(DEM)simulations have been conducted to scrutinize the feasibility of centrifugal modelling for dry granular run-out processes under deflective Coriolis conditions.The findings concerning the deflective Coriolis effect reveal a consistent rise in the run-out distance by 2%–16%,a modest increase in bulk flow velocity of under 4%,and a slight elevation in average flow depth by no more than 25%.These alterations display smaller dependence on the specific testing conditions due to the granular flow undergoing dual deflections in opposing directions.This underscores the significance and utility of the deflective Coriolis condition.Notably,the anticipated reduction in error in predicting the final run-out distance is substantial,potentially reaching a 150%improvement compared to predictions made under the dilative and compressive Coriolis conditions.Therefore,the deflective Coriolis condition is advised when the final run-out distance of the granular flow is the main concern.To mitigate the impact of Coriolis acceleration,a greater initial height of the granular column is recommended,with a height/width ratio exceeding 1,as the basal friction of the granular material plays a crucial role in mitigating the deflective Coriolis effect.For more transverse-uniform flow properties,the width of the granular column should be as large as possible.
基金funded by the National Key R&D Program of China(2021YFE0111900)the China Postdoctoral Science Foundation(2023M730353)+1 种基金Major Program of National Natural Science Foundation of China(Grant No.42041006)Natural Science Basic Research Program of Shaanxi(Program No.2022JM-167).
文摘On 12th August 2015,a massive rapid long run-out rock landslide occurred in the Shanyang Vanadium Mine in Shaanxi Province,China,which claimed the lives of 65 miners.No heavy rainfalls,earthquakes,and mining blasts were recorded before the incident.Therefore,the failure mechanism and the cause of the long run-out movement are always in arguments.In this paper,we conducted a detailed field investigation,laboratory tests,block theory analysis,and numerical simulation to investigate the failure and long run-out mechanisms of the landslide.The field investigation results show that the source material of the rock landslide is a huge dolomite wedge block bedding on siliceous shale layers.Uniaxial compression tests indicate that the uniaxial compression strength of the intact dolomite is 130-140MPa and the dolomite shows a brittle failure mode.Due to the progressive downward erosion of the gully,the dolomite rock bridge at the slope toe became thinner.As the compression stress in the dolomite bridge increased to surpass its strength,the brittle failure of the bridge occurred.Then huge potential energy was released following the disintegration of the landslide,which led to the high acceleration of this rock landslide.The 3D discrete element simulation results suggest that the low intergranular friction contributes to the long run-out movement of this rock landslide.
基金NSF of China under Contract No. 41030742NBRP of China (973 Program) under Grant No.2011CB013605Scientific Research Foundation of Graduate School of Southwest Jiaotong University
文摘The peak ground acceleration （PGA）, the volume of a sliding mass V, the height of a mountain HL and the slope angle θ of a mountain are four important parameters affecting the horizontal run-out distance of a landslide L. Correlations among them are studied statistically based on field investigations from 67 landslides triggered by the ground shaking and other factors during the Wenchuan earthquake, and then a prediction model for horizontal run-out distance L is developed in this study. This model gives due consideration to the implications of the above four parameters on the horizontal run-out distance L and the validity of the model is verified by the Donghekou and Magong Woqian landslides. At the same time, the advantages of the model are shown by comparing it with two other common prediction methods. The major findings drawn from the analyses and comparisons are： （1） an exponential relationship exists between L and log V, L and log HL, L and log PGA separately, but a negative exponential relationship exists between L and log tan0, which agrees with the statistical results; and （2） according to the analysis results of the relative relationship between the height of a mountain （H） and the place where the landslides occur, the probabilities at distances of2H/3-H, H/3-2H/3, and O-H/3 are 70.8%, 15.4%, and 13.8%, respectively, revealing that most landslides occurred at a distance of H/2-H. This prediction model can provide an effective technical support for the prevention and mitigation of landslide hazards.
基金Project(50634030) supported by the National Natural Science Foundation of China
文摘In order to meet the severe requirements of market and reduce production costs of high quality steels,advanced run-out table cooling based on ultra fast cooling(UFC) and laminar cooling(LC) was proposed and applied to industrial production.Cooling mechanism of UFC and LC was introduced first,and then the control system and control models were described.By using UFC and LC,low-cost Q345B strips had been produced in a large scale,and industrial trials of producing low-cost dual phase strips were completed successfully.Application results show that the ultra fast cooling is uniform along the strip width and length,and does not affect the flatness of strips.The run-out table cooling system runs stably with a high precision,and makes it possible for the user to develop more high quality steels with low costs.
基金co-supported by the National Natural Science Foundation of China (Nos.51525501,11290143,and 51621064)the Science Challenging Program of China (No.JCKY2016212A506-0102)
文摘In this paper, a multi-delay milling system considering helix angle and run-out effects is firstly established. An exponential cutting force model is used to model the interaction between a work-piece and a cutting tool, and a new approach is presented for accurately calibrating exponential cutting force coefficients and cutter run-out parameters. Furthermore, based on an implicit multi-step Adams formula and an improved precise time-integration algorithm, a novel stability prediction method is proposed to predict the stability of the system. The involved time delay term and periodic coefficient term are integrated as a comprehensive state term in the integral response which is approximated by the Adams formula. Then, a Floquet transition matrix with an arbitraryorder form is constructed by using a series of matrix multiplication, and the stability of the system is determined by the Floquet theory. Compared to classical semi-discretization methods and fulldiscretization methods, the developed method shows a good performance in convergence, efficiency,accuracy, and multi-order complexity. A series of cutting tests is further carried out to validate the practicability and effectiveness of the proposed method. The results show that the calibration process needs a time of less than 5 min, and the stability prediction method is effective.
文摘Non-uniformity of temperature distribution across strip width direction is the ultimate reason why the flatness defect occurs on the strip after cooling process although the strip is flat at the exit of finishing mill.One thermal , microstructural and mechanical coupling analysis model for predicting flatness change of steel strip during the run-out table cooling process was established using ABAQUS finite element software.K Esaka phase transformation kinetics model was employed to calculate the phase transformation , and coupled with temperature calculation using the user subroutine program HETVAL.Elasto-plasticity constitutive equations of steel material , in which conventional elastic and plastic strains , thermal strain , phase transformation strain and transformation induced plastic strain were considered , were derived and programmed in the user subroutine program UMAT.The conclusion that flatness of steel strip will develop to edge wave defect under the functions of the differential thermal and microstructural behaviors across strip width during the run-out table cooling procedure was acquired through the analysis results of this model.Calculation results of this analysis model agree well with the actual measurements and observation.
基金the National Basic Research Program (973) of China (No. 2006CB705400)the National Natural Science Foundation of China (No. 50575200)
文摘Mathematical models are been proposed to simulate the thermal and metallurgical behaviors of the strip occtLrring on the run-out table （ROT） in a hot strip mill. A variational method is utilized for the discretization of the governing transient conduction-convection equation, with heat transfer coefficients adaptively determined by the actual mill data. To consider the thermal effect of phase transformation during cooling, a constitutive equation for describing austenite decomposition kinetics of steel in air and water cooling zones is coupled with the heat transfer model. As the basic required inputs in the numerical simulations, thermal material properties are experimentally measured for three carbon steels and the least squares method is used to statistically derive regression models for the properties, including specific heat and thermal conductivity. The numerical simulation and experimental results show that the setup accuracy of the temperature prediction system of ROT is effectively improved.
文摘Combined with real engineering, we mainly study the stability of the equilibrium state at the coordinate center of an orthotropic stringer shell system, and the approximate analytic periodic motion is presented around the studied equilibrium state. In addition the rationality of the obtained results is verified by numerical simulation. Furthermore we found that there are actually only four kinds of phase portrait of this type of shell.
基金supported in part by the National Key Basic Research and Development Plan (“973”Plan)(No. 613274)Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘Three types of composite stringers were impacted from two different directions.Relationships between impact energy and visible defect length were found.The critical impact energy corresponding to barely visible impact damage(BVID)of each stringer was determined.Specimens with BVID were then compressed to obtain the residual strength.Experimental results showed that for all types of stringers,the critical energy of in-plane impact is always much lower than out-plane ones.In-plane impact causes much more decrement of stringers'bearing capacity than outplane impact.For both impact directions,I-stringers own the highest defect detectability,T-stringers come second.Meanwhile,I-stringers own the better residual strength ratio than I-stringers and I-stringers.Synthetic considering impact defect detectability and residual bearing capacity after impact,T-stringers own the best compression-afterimpact(CAI)behaviors.
