This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity a...This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.展开更多
The flow of a tetra-hybrid Casson nanofluid(Al_(2)O_(3)-CuO-TiO_(2)-Ag/H_(2)O)over a nonlinear stretching sheet is investigated.The Buongiorno model is used to account for thermophoresis and Brownian motion,while ther...The flow of a tetra-hybrid Casson nanofluid(Al_(2)O_(3)-CuO-TiO_(2)-Ag/H_(2)O)over a nonlinear stretching sheet is investigated.The Buongiorno model is used to account for thermophoresis and Brownian motion,while thermal radiation is incorporated to examine its influence on the thermal boundary layer.The governing partial differential equations(PDEs)are reduced to a system of nonlinear ordinary differential equations(ODEs)with fully non-dimensional similarity transformations involving all independent variables.To solve the obtained highly nonlinear system of differential equations,a novel Clique polynomial collocation method is applied.The analysis focuses on the effects of the Casson parameter,power index,radiation parameter,thermophoresis parameter,Brownian motion parameter,and Lewis number.The key findings show that thermal radiation intensifies the thermal boundary layer,the Casson parameter reduces the velocity,and the Lewis number suppresses the concentration with direct relevance to polymer processing,coating flows,electronic cooling,and biomedical applications.展开更多
The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted ...The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted to the similarity equations by techniques of the similarity transformation. The bvp4c function that is available in MATLAB software is utilized for solving the similarity equations numerically. The numerical results are obtained for selected different values of parameters. The results discover that two solutions exist, up to a certain value of the stretching/shrinking and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions for copper and wedge angle parameter increase. It is also found that the hybrid nanofluid enhances the heat transfer rate compared with the regular nanofluid. The reduction of the heat transfer rate is observed with the increase in radiation parameter. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.展开更多
The boundary layer flow of a nanofluid past a stretching/shrinking sheet with hydrodynamic and thermal slip boundary conditions is studied. Numerical solutions to the governing equations are obtained using a shooting ...The boundary layer flow of a nanofluid past a stretching/shrinking sheet with hydrodynamic and thermal slip boundary conditions is studied. Numerical solutions to the governing equations are obtained using a shooting method. The results are found for the skin friction coefficient, the local Nusselt number, and the local Sherwood number as well as the velocity, temperature, and concentration profiles for some values of the velocity slip parameter, thermal slip parameter, stretching/shrinking parameter, thermophoresis parameter, and Brownian motion parameter. The results show that the local Nusselt number, which represents the heat transfer rate, is lower for higher values of thermal slip parameter, thermophoresis parameter, and Brownian motion parameter.展开更多
In this study, a reliable algorithm to develop approximate solutions for the problem of fluid flow over a stretching or shrinking sheet is proposed. It is depicted that the differential transform method (DTM) solution...In this study, a reliable algorithm to develop approximate solutions for the problem of fluid flow over a stretching or shrinking sheet is proposed. It is depicted that the differential transform method (DTM) solutions are only valid for small values of the independent variable. The DTM solutions diverge for some differential equations that extremely have nonlinear behaviors or have boundary-conditions at infinity. For this reason the governing boundary-layer equations are solved by the Multi-step Differential Transform Method (MDTM). The main advantage of this method is that it can be applied directly to nonlinear differential equations without requiring linearization, discretization, or perturbation. It is a semi analytical-numerical technique that formulizes Taylor series in a very different manner. By applying the MDTM the interval of convergence for the series solution is increased. The MDTM is treated as an algorithm in a sequence of intervals for finding accurate approximate solutions for systems of differential equations. It is predicted that the MDTM can be applied to a wide range of engineering applications.展开更多
In this analysis,the magnetohydrodynamic boundary layer flow of Casson fluid over a permeable stretching/shrinking sheet in the presence of wall mass transfer is studied.Using similarity transformations,the governing ...In this analysis,the magnetohydrodynamic boundary layer flow of Casson fluid over a permeable stretching/shrinking sheet in the presence of wall mass transfer is studied.Using similarity transformations,the governing equations are converted to an ordinary differential equation and then solved analytically.The introduction of a magnetic field changes the behavior of the entire flow dynamics in the shrinking sheet case and also has a major impact in the stretching sheet case.The similarity solution is always unique in the stretching case,and in the shrinking case the solution shows dual nature for certain values of the parameters.For stronger magnetic field,the similarity solution for the shrinking sheet case becomes unique.展开更多
The viscous fluid flow and heat transfer over a stretching(shrinking)and porous sheets of nonuniform thickness are investigated in this paper.The modeled problem is presented by utilizing the stretching(shrinking)and ...The viscous fluid flow and heat transfer over a stretching(shrinking)and porous sheets of nonuniform thickness are investigated in this paper.The modeled problem is presented by utilizing the stretching(shrinking)and porous velocities and variable thickness of the sheet and they are combined in a relation.Consequently,the new problem reproduces the different available forms of flow motion and heat transfer maintained over a stretching(shrinking)and porous sheet of variable thickness in one go.As a result,the governing equations are embedded in several parameters which can be transformed into classical cases of stretched(shrunk)flows over porous sheets.A set of general,unusual and new variables is formed to simplify the governing partial differential equations and boundary conditions.The final equations are compared with the classical models to get the validity of the current simulations and they are exactly matched with each other for different choices of parameters of the current problem when their values are properly adjusted and manipulated.Moreover,we have recovered the classical results for special and appropriate values of the parameters(δ_(1),δ_(2),δ_(3),c,and B).The individual and combined effects of all inputs from the boundary are seen on flow and heat transfer properties with the help of a numerical method and the results are compared with classical solutions in special cases.It is noteworthy that the problem describes and enhances the behavior of all field quantities in view of the governing parameters.Numerical result shows that the dual solutions can be found for different possible values of the shrinking parameter.A stability analysis is accomplished and apprehended in order to establish a criterion for the determinations of linearly stable and physically compatible solutions.The significant features and diversity of the modeled equations are scrutinized by recovering the previous problems of fluid flow and heat transfer from a uniformly heated sheet of variable(uniform)thickness with variable(uniform)stretching/shrinking and injection/suction velocities.展开更多
We investigate the dual solutions for the MHD flow of micropolar fluid over a stretching/shrinking sheet with heat transfer. Suitable relations transform the partial differential equations into the ordinary differenti...We investigate the dual solutions for the MHD flow of micropolar fluid over a stretching/shrinking sheet with heat transfer. Suitable relations transform the partial differential equations into the ordinary differential equations.Closed forms solutions are also obtained in terms of confluent hypergeometric function. This is the first attempt to determine the exact solutions for the non-linear equations of MHD micropolar fluid model. It is demonstrated that the microrotation parameter helps in increasing Nusselt number and the dual solutions exist for all fluid flow parameters under consideration. The dual behavior of dimensionless velocity, temperature, microrotation, skin-friction coefficient,local Nusselt number is displayed on graphs and examined.展开更多
The present work is concerned with the effects of viscous dissipation and heat source/sink on a three-dimensional magnetohydrodynamic boundary layer axisymmetric stagnation flow, and the heat transfer of an electrical...The present work is concerned with the effects of viscous dissipation and heat source/sink on a three-dimensional magnetohydrodynamic boundary layer axisymmetric stagnation flow, and the heat transfer of an electrically conducting fluid over a sheet, which shrinks or stretches axisymmetrically in its own plane where the line of the symmetry of the stagnation flow and that of the shrinking （stretching） sheet are, in general, not aligned. The governing equations are transformed into ordinary differential equations by using suitable similarity transformations and then solved numerically by a shooting technique. This investigation explores the conditions of the non-existence, existence and uniqueness of the solutions of the similar equations numerically. It is noted that the range of the velocity ratio parameter, where the similarity solution exists, is increased with the increase of the value of the magnetic parameter. Furthermore, the study reveals that the non-alignment function affects the shrinking sheet more than the stretching sheet. In addition, the numerical results of the velocity profile, temperature profile, skin-friction coefficient, and rate of heat transfer at the sheet are discussed in detail with different parameters.展开更多
We report on the magnetohydrodynamic impact on the axisymmetric flow of Al_(2)O_(3)/Cu nanoparticles suspended in H_(2)O past a stretched/shrinked sheet.With the use of partial differential equations and the correspon...We report on the magnetohydrodynamic impact on the axisymmetric flow of Al_(2)O_(3)/Cu nanoparticles suspended in H_(2)O past a stretched/shrinked sheet.With the use of partial differential equations and the corresponding thermophysical characteristics of nanoparticles,the physical flow process is illustrated.The resultant nonlinear system of partial differential equations is converted into a system of ordinary differential equations using the suitable similarity transformations.The transformed differential equations are solved analytically.Impacts of the magnetic parameter,solid volume fraction and stretching/shrinking parameter on momentum and temperature distribution have been analyzed and interpreted graphically.The skin friction and Nusselt number were also evaluated.In addition,existence of dual solution was deduced for the shrinking sheet and unique solution for the stretching one.Further,Al_(2)O_(3)/H_(2)O nanofluid flow has better thermal conductivity on comparing with Cu/H_(2)O nanofluid.Furthermore,it was found that the first solutions of the stream are stable and physically realizable,whereas those of the second ones are unstable.展开更多
The boundary layer flow and heat transfer analysis of an incompressible viscous fluid for a hyperbolically stretching sheet is presented. The analytical and numer- ical results are obtained by a series expansion metho...The boundary layer flow and heat transfer analysis of an incompressible viscous fluid for a hyperbolically stretching sheet is presented. The analytical and numer- ical results are obtained by a series expansion method and a local non-similarity （LNS） method, respectively. The analytical and numerical results for the skin friction and the Nusselt number are calculated and compared with each other. The significant observation is that the momentum and the thermal boundary layer thickness decrease as the distance from the leading edge increases. The well-known solution of linear stretching is found as the leading order solution for the hyperbolic stretching.展开更多
This study examines the behavior of a micropolar nanofluidflowing over a sheet in the presence of a transverse magneticfield and thermal effects.In addition,chemical(first-order homogeneous)reactions are taken into accoun...This study examines the behavior of a micropolar nanofluidflowing over a sheet in the presence of a transverse magneticfield and thermal effects.In addition,chemical(first-order homogeneous)reactions are taken into account.A similarity transformation is used to reduce the system of governing coupled non-linear partial differ-ential equations(PDEs),which account for the transport of mass,momentum,angular momentum,energy and species,to a set of non-linear ordinary differential equations(ODEs).The Runge-Kutta method along with shoot-ing method is used to solve them.The impact of several parameters is evaluated.It is shown that the micro-rota-tional velocity of thefluid rises with the micropolar factor.Moreover,the radiation parameter can have a remarkable influence on theflow and temperature profiles and on the angular momentum distribution.展开更多
In this paper, the boundary layer stagnation-point slip flow and heat transfer towards a shrinking/stretching cylinder over a permeable surface is considered. The governing equations are first transformed into a syste...In this paper, the boundary layer stagnation-point slip flow and heat transfer towards a shrinking/stretching cylinder over a permeable surface is considered. The governing equations are first transformed into a system of non-dimensional equations via the non-dimensional variables, and then into self-similar ordinary differential equations before they are solved numerically using the shooting method. Numerical results are obtained for the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles for some values of the governing parameters, namely the velocity slip parameter (α), the thermal slip parameter (β), the curvature parameter (γ) and the velocity ratio parameter (c/a). The physical quantities of interest are the skin friction coefficient and the local Nusselt number measured by f’’(0) and –θ’(0), respectively. The numerical results show that the velocity slip parameter α increases the heat transfer rate at the surface, while the thermal slip parameter β decreases it. On the other hand, increasing the velocity slip parameter α causes the decrease in the flow velocity. Further, it is found that the solutions for a shrinking cylinder (c/ac/a>0) case. Finally, it is also found that the values of f’’(0) and –θ’(0) increase as the curvature parameter γ increases.展开更多
The non-Newtonian fluid model reflects the behavior of the fluid flow in global manufacturing progress and increases product performance.Therefore,the present work strives to analyze the unsteady Maxwell hybrid nanofl...The non-Newtonian fluid model reflects the behavior of the fluid flow in global manufacturing progress and increases product performance.Therefore,the present work strives to analyze the unsteady Maxwell hybrid nanofluid toward a stretching/shrinking surface with thermal radiation effect and heat transfer.The partial derivatives of the multivariable differential equations are transformed into ordinary differential equations in a specified form by applying appropriate transformations.The resulting mathematical model is clarified by utilizing the bvp4c technique.Different control parameters are investigated to see how they affect the outcomes.The results reveal that the skin friction coefficient increases by adding nanoparticles and suction parameters.The inclusion of the Maxwell parameter and thermal radiation effect both show a declining tendency in the local Nusselt number,and as a result,the thermal flow efficacy is reduced.The reduction of the unsteadiness characteristic,on the other hand,considerably promotes the improvement of heat transfer performance.The existence of more than one solution is proven,and this invariably leads to an analysis of solution stability,which validates the first solution viability.展开更多
Time-dependent,two-dimensional(2 D)magnetohydrodynamic(MHD)micropolar nanomaterial flow over a shrinking/stretching surface near the stagnant point is considered.Mass and heat transfer characteristics are incorporated...Time-dependent,two-dimensional(2 D)magnetohydrodynamic(MHD)micropolar nanomaterial flow over a shrinking/stretching surface near the stagnant point is considered.Mass and heat transfer characteristics are incorporated in the problem.A model of the partial differential expressions is altered into the forms of the ordinary differential equations via similarity transformations.The obtained equations are numerically solved by a shooting scheme in the MAPLE software.Dual solutions are observed at different values of the specified physical parameters.The stability of first and second solutions is examined through the stability analysis process.This analysis interprets that the first solution is stabilized and physically feasible while the second one is un-stable and not feasible.Furthermore,the natures of various physical factors on the drag force,skin-friction factor,and rate of mass and heat transfer are determined and interpreted.The micropolar nanofluid velocity declines with a rise in the suction and magnetic parameters,whereas it increases by increasing the unsteadiness parameter.The temperature of the micropolar nanofluid rises with increase in the Brownian motion,radiation,thermophoresis,unsteady and magnetic parameters,but it decreases against an increment in the thermal slip constraint and Prandtl number.The concentration of nanoparticles reduces against the augmented Schmidt number and Brownian movement values but rises for incremented thermophoresis parameter values.展开更多
Hybrid nanofluids are remarkable functioning liquids that are intended to reduce the energy loss while maximizing the heat transmission.In the involvement of suction and nonlinear thermal radiation effects,this study ...Hybrid nanofluids are remarkable functioning liquids that are intended to reduce the energy loss while maximizing the heat transmission.In the involvement of suction and nonlinear thermal radiation effects,this study attempted to explore the energy transmission features of the inclined magnetohydrodynamic(MHD)stagnation flow of CNTs-hybrid nanofluid across the nonlinear permeable stretching or shrinking sheet.This work also included some noteworthy features like chemical reactions,variable molecular diffusivity,quadratic convection,viscous dissipation,velocity slip and heat omission assessment.Employing appropriate similarity components,the model equations were modified to ODEs and computed by using the HAM technique.The impact of various relevant flow characteristics on movement,heat and concentration profiles was investigated and plotted on a graph.Considering various model factors,the significance of drag friction,heat and mass transfer rate were also computed in tabular and graphical form.This leads to the conclusion that such factors have a considerable impact on the dynamics of fluid as well as other engineering measurements of interest.Furthermore,viscous forces are dominated by increasing the values ofλ_(p),δ_(m)andδ_(q),and as a result,F(ξ)accelerates while the opposite trend is observed for M andφ.The drag friction is boosted by the augmentation M,λ_(p)andφ,but the rate of heat transfer declined.According to our findings,hybrid nanoliquid effects dominate that of ordinary nanofluid in terms of F(ξ),Θ(ξ)andφ(ξ)profiles.The HAM and the numerical technique(shooting method)were found to be in good agreement.展开更多
Magnetohydrodynamic(MHD)radiative chemically reactive mixed convection flow of a hybrid nanofluid(Al_(2)O_(3)–Cu/H_(2)O)across an inclined,porous,and stretched sheet is examined in this study,along with its unsteady ...Magnetohydrodynamic(MHD)radiative chemically reactive mixed convection flow of a hybrid nanofluid(Al_(2)O_(3)–Cu/H_(2)O)across an inclined,porous,and stretched sheet is examined in this study,along with its unsteady heat and mass transport properties.The hybrid nanofluid’s enhanced heat transfer efficiency is a major benefit in high-performance engineering applications.It is composed of two separate nanoparticles suspended in a base fluid and is chosen for its improved thermal properties.Thermal radiation,chemical reactions,a transverse magnetic field,surface stretching with time,injection or suction through the porous medium,and the effect of inclination,which introduces gravity-induced buoyancy forces,are all important physical phenomena that are taken into account in the analysis.A system of nonlinear ordinary differential equations(ODEs)is derived from the governing partial differential equations for mass,momentum,and energy by applying suitable similarity transformations.This simplifies the modeling procedure.The bvp4c solver in MATLAB is then used to numerically solve these equations.Different governing parameters modify temperature,concentration,and velocity profiles in graphs and tables.These factors include radiation intensity,chemical reaction rate,magnetic field strength,unsteadiness,suction/injection velocity,inclination angle,and nanoparticle concentration.A complex relationship between buoyancy and magnetic factors makes hybrid nanofluids better at heat transmission than regular ones.Thermal systems including cooling technologies,thermal coatings,and electronic heat management benefit from these findings.展开更多
This comprehensive research examines the dynamics of magnetohydrodynamic(MHD)flow and heat transfer within a couple stress fluid.The investigation specifically focuses on the fluid’s behavior over a vertical stretchi...This comprehensive research examines the dynamics of magnetohydrodynamic(MHD)flow and heat transfer within a couple stress fluid.The investigation specifically focuses on the fluid’s behavior over a vertical stretching sheet embedded within a porous medium,providing valuable insights into the complex interactions between fluid mechanics,thermal transport,and magnetic fields.This study accounts for the significant impact of heat generation and thermal radiation,crucial factors for enhancing heat transfer efficiency in various industrial and technological contexts.The research employs mathematical techniques to simplify complex partial differential equations(PDEs)governing fluid flow and heat transfer.Specifically,suitable similarity transformations are applied to convert the PDEs into a more manageable system of ordinary differential equations(ODEs).The homotopy perturbation method(HPM)is employed to derive approximate analytical solutions for the problem.The influences of key parameters,such as magnetic field strength,heat generation,thermal radiation,porosity,and couple stress,on velocity and temperature profiles are analyzed and discussed.Findings indicate that the mixed convection parameter positively affects flow velocity,while the magnetic field parameter significantly alters the flow dynamics,exhibiting an inverse relationship.Further,this type of flow behavior model is relevant to real-world systems like cooling of nuclear reactors and oil extraction through porous formations,where magnetic and thermal effects are significant.展开更多
In this paper,the authors examine various slip effects on themagnetic field and thermal radiative impacts on the flow,mass and heat transfer of a Jeffrey nanofluid over a 2-dimensional inclined stretching sheet by a p...In this paper,the authors examine various slip effects on themagnetic field and thermal radiative impacts on the flow,mass and heat transfer of a Jeffrey nanofluid over a 2-dimensional inclined stretching sheet by a porous media.The offered work is modelled to be in the form of a combination of coupled highly nonlinear partial differential equations in dimensional contexts.Governing equations were obtained,dimensionless parameters were defined in terms of similarity parameters,and the solutionswere obtained by the Homotopy Analysis Method(HAM).The analysis is significant as the effects of viscosity are identified and the important parameters are to be determined that could eventually control a type of flowbehaviour,especially in promoting the flowand inhibiting flowof velocity,temperature,and concentrations.The findings show that such an increase in themagnetic parameter decreases the velocity profile by approximately 15%due to more Lorentz forces,and thermal radiation increases the temperature profile by up to 25%,therefore,enhancing the rate of heat transfer.The process of Brownian motion and thermophoresis increases the depth of the thermal boundary layer by 10–20 percent and reduces in concentration profiles by 12 percent when the Brownian motion parameter increases.A velocity slip parameter lowers the velocity field by about 18 percent,and a parameter of permeability lowers the momentum of flow by another 10 percent.The HAM solutions show very high accuracy levels,having an order of convergence at level 15 and errormargins are well below 0.01 percent compared to the earlier studies.All these findings can provide profound knowledge in improving heat transmission in non-Newtonian fluid systems and can be used in biomedical engineering,thermal insulation,and industrial processes such as polymer extrusion and cooling technology.Principles of heat and mass transfer give us the crucial foundation on which to study the behavior of heat andmaterial flows in other engineering and scientific disciplines.Such principles apply to various fields of study,including the following engineering fields:mechanical,chemical,aerospace,civil,and environmental.展开更多
Fluid flow and transmission of heat have grown in importance in technology nowadays,and development is necessary to raise the technology standard to be on track with current advancements.This work,therefore,attempts t...Fluid flow and transmission of heat have grown in importance in technology nowadays,and development is necessary to raise the technology standard to be on track with current advancements.This work,therefore,attempts to ascertain the effects on fluid flow and transmission of heat across a permeable horizontal shrinking/stretching sheet of the viscous dissipation,and the temperature and velocity slip parameters.Dusty hybrid nanofluids were developed by scaterring copper and alumina nanoparticles along with dust particles into water.The programmed solver in MATLAB,referred to as bvp4c,has been utilized to generate numerical results of the similarity equations produced by simplifying the governing equations using the boundary layer approximation and the similarity transformation approach.The findings show that the rise in Eckert number lowers the heat transfer efficiency by 62.82%for the first solution.Interestingly,the Nusselt number becomes negative in the presence of viscous dissipation for the first and second solutions,with the influence of slip parameters,suggesting that heat is transferred from the fluid to the surface.Additionally,for certain values of shrinking surfaces,dual solutions are achievable.Thus,to sum up,modifying the parameters such as viscous dissipation and slip parameters significantly impacts the rate of heat transmission.展开更多
基金the Researchers Supporting Project number(RSPD2025R997),King Saud University,Riyadh,Saudi Arabia.
文摘This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.
基金the UGC,New Delhi,India for financial assistance via the UGC-Junior Research Fellowship(CSIR-UGC NET JULY 2024)(Student ID:241610090610)。
文摘The flow of a tetra-hybrid Casson nanofluid(Al_(2)O_(3)-CuO-TiO_(2)-Ag/H_(2)O)over a nonlinear stretching sheet is investigated.The Buongiorno model is used to account for thermophoresis and Brownian motion,while thermal radiation is incorporated to examine its influence on the thermal boundary layer.The governing partial differential equations(PDEs)are reduced to a system of nonlinear ordinary differential equations(ODEs)with fully non-dimensional similarity transformations involving all independent variables.To solve the obtained highly nonlinear system of differential equations,a novel Clique polynomial collocation method is applied.The analysis focuses on the effects of the Casson parameter,power index,radiation parameter,thermophoresis parameter,Brownian motion parameter,and Lewis number.The key findings show that thermal radiation intensifies the thermal boundary layer,the Casson parameter reduces the velocity,and the Lewis number suppresses the concentration with direct relevance to polymer processing,coating flows,electronic cooling,and biomedical applications.
基金the Ministry of Education of Malaysia(No.FRGS/1/2019/STG06/UKM/01/4)Ministry of Science of Romania(No.PN-III-P4-ID-PCE-2016-0036)。
文摘The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted to the similarity equations by techniques of the similarity transformation. The bvp4c function that is available in MATLAB software is utilized for solving the similarity equations numerically. The numerical results are obtained for selected different values of parameters. The results discover that two solutions exist, up to a certain value of the stretching/shrinking and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions for copper and wedge angle parameter increase. It is also found that the hybrid nanofluid enhances the heat transfer rate compared with the regular nanofluid. The reduction of the heat transfer rate is observed with the increase in radiation parameter. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.
基金Project supported by the Ministry of Higher Education in Malaysia(No.FRGS/1/2012/SG04/UKM/2001/1)the Universiti Kebangsaan Malaysia(No.DIP-2012-31)
文摘The boundary layer flow of a nanofluid past a stretching/shrinking sheet with hydrodynamic and thermal slip boundary conditions is studied. Numerical solutions to the governing equations are obtained using a shooting method. The results are found for the skin friction coefficient, the local Nusselt number, and the local Sherwood number as well as the velocity, temperature, and concentration profiles for some values of the velocity slip parameter, thermal slip parameter, stretching/shrinking parameter, thermophoresis parameter, and Brownian motion parameter. The results show that the local Nusselt number, which represents the heat transfer rate, is lower for higher values of thermal slip parameter, thermophoresis parameter, and Brownian motion parameter.
文摘In this study, a reliable algorithm to develop approximate solutions for the problem of fluid flow over a stretching or shrinking sheet is proposed. It is depicted that the differential transform method (DTM) solutions are only valid for small values of the independent variable. The DTM solutions diverge for some differential equations that extremely have nonlinear behaviors or have boundary-conditions at infinity. For this reason the governing boundary-layer equations are solved by the Multi-step Differential Transform Method (MDTM). The main advantage of this method is that it can be applied directly to nonlinear differential equations without requiring linearization, discretization, or perturbation. It is a semi analytical-numerical technique that formulizes Taylor series in a very different manner. By applying the MDTM the interval of convergence for the series solution is increased. The MDTM is treated as an algorithm in a sequence of intervals for finding accurate approximate solutions for systems of differential equations. It is predicted that the MDTM can be applied to a wide range of engineering applications.
基金the financial support of National Board forHigher Mathematics (NBHM),DAE,Mumbai,India for pursuing this workThe research of A. Alsaedi is partially supported by the Deanship of Scientific Research (DSR),King Abdulaziz University,Jeddah,Saudi Arabia
文摘In this analysis,the magnetohydrodynamic boundary layer flow of Casson fluid over a permeable stretching/shrinking sheet in the presence of wall mass transfer is studied.Using similarity transformations,the governing equations are converted to an ordinary differential equation and then solved analytically.The introduction of a magnetic field changes the behavior of the entire flow dynamics in the shrinking sheet case and also has a major impact in the stretching sheet case.The similarity solution is always unique in the stretching case,and in the shrinking case the solution shows dual nature for certain values of the parameters.For stronger magnetic field,the similarity solution for the shrinking sheet case becomes unique.
文摘The viscous fluid flow and heat transfer over a stretching(shrinking)and porous sheets of nonuniform thickness are investigated in this paper.The modeled problem is presented by utilizing the stretching(shrinking)and porous velocities and variable thickness of the sheet and they are combined in a relation.Consequently,the new problem reproduces the different available forms of flow motion and heat transfer maintained over a stretching(shrinking)and porous sheet of variable thickness in one go.As a result,the governing equations are embedded in several parameters which can be transformed into classical cases of stretched(shrunk)flows over porous sheets.A set of general,unusual and new variables is formed to simplify the governing partial differential equations and boundary conditions.The final equations are compared with the classical models to get the validity of the current simulations and they are exactly matched with each other for different choices of parameters of the current problem when their values are properly adjusted and manipulated.Moreover,we have recovered the classical results for special and appropriate values of the parameters(δ_(1),δ_(2),δ_(3),c,and B).The individual and combined effects of all inputs from the boundary are seen on flow and heat transfer properties with the help of a numerical method and the results are compared with classical solutions in special cases.It is noteworthy that the problem describes and enhances the behavior of all field quantities in view of the governing parameters.Numerical result shows that the dual solutions can be found for different possible values of the shrinking parameter.A stability analysis is accomplished and apprehended in order to establish a criterion for the determinations of linearly stable and physically compatible solutions.The significant features and diversity of the modeled equations are scrutinized by recovering the previous problems of fluid flow and heat transfer from a uniformly heated sheet of variable(uniform)thickness with variable(uniform)stretching/shrinking and injection/suction velocities.
文摘We investigate the dual solutions for the MHD flow of micropolar fluid over a stretching/shrinking sheet with heat transfer. Suitable relations transform the partial differential equations into the ordinary differential equations.Closed forms solutions are also obtained in terms of confluent hypergeometric function. This is the first attempt to determine the exact solutions for the non-linear equations of MHD micropolar fluid model. It is demonstrated that the microrotation parameter helps in increasing Nusselt number and the dual solutions exist for all fluid flow parameters under consideration. The dual behavior of dimensionless velocity, temperature, microrotation, skin-friction coefficient,local Nusselt number is displayed on graphs and examined.
基金supported by the C.S.I.R.,India in the form of Junior Research Fellowship(JRF)(Grant No.09/149(0593)/2011-EMR-I)
文摘The present work is concerned with the effects of viscous dissipation and heat source/sink on a three-dimensional magnetohydrodynamic boundary layer axisymmetric stagnation flow, and the heat transfer of an electrically conducting fluid over a sheet, which shrinks or stretches axisymmetrically in its own plane where the line of the symmetry of the stagnation flow and that of the shrinking （stretching） sheet are, in general, not aligned. The governing equations are transformed into ordinary differential equations by using suitable similarity transformations and then solved numerically by a shooting technique. This investigation explores the conditions of the non-existence, existence and uniqueness of the solutions of the similar equations numerically. It is noted that the range of the velocity ratio parameter, where the similarity solution exists, is increased with the increase of the value of the magnetic parameter. Furthermore, the study reveals that the non-alignment function affects the shrinking sheet more than the stretching sheet. In addition, the numerical results of the velocity profile, temperature profile, skin-friction coefficient, and rate of heat transfer at the sheet are discussed in detail with different parameters.
基金LMP acknowledges financial support from ANID through Convocatoria Nacional Subvención a Instalación en la Academia Convocatoria Año 2021,Grant SA77210040。
文摘We report on the magnetohydrodynamic impact on the axisymmetric flow of Al_(2)O_(3)/Cu nanoparticles suspended in H_(2)O past a stretched/shrinked sheet.With the use of partial differential equations and the corresponding thermophysical characteristics of nanoparticles,the physical flow process is illustrated.The resultant nonlinear system of partial differential equations is converted into a system of ordinary differential equations using the suitable similarity transformations.The transformed differential equations are solved analytically.Impacts of the magnetic parameter,solid volume fraction and stretching/shrinking parameter on momentum and temperature distribution have been analyzed and interpreted graphically.The skin friction and Nusselt number were also evaluated.In addition,existence of dual solution was deduced for the shrinking sheet and unique solution for the stretching one.Further,Al_(2)O_(3)/H_(2)O nanofluid flow has better thermal conductivity on comparing with Cu/H_(2)O nanofluid.Furthermore,it was found that the first solutions of the stream are stable and physically realizable,whereas those of the second ones are unstable.
基金supported by the CIIT Research Grant Program of COMSATS Institute of Information Technology of Pakistan (No. 16-69/CRGP/CIIT/IBD/10/711)
文摘The boundary layer flow and heat transfer analysis of an incompressible viscous fluid for a hyperbolically stretching sheet is presented. The analytical and numer- ical results are obtained by a series expansion method and a local non-similarity （LNS） method, respectively. The analytical and numerical results for the skin friction and the Nusselt number are calculated and compared with each other. The significant observation is that the momentum and the thermal boundary layer thickness decrease as the distance from the leading edge increases. The well-known solution of linear stretching is found as the leading order solution for the hyperbolic stretching.
文摘This study examines the behavior of a micropolar nanofluidflowing over a sheet in the presence of a transverse magneticfield and thermal effects.In addition,chemical(first-order homogeneous)reactions are taken into account.A similarity transformation is used to reduce the system of governing coupled non-linear partial differ-ential equations(PDEs),which account for the transport of mass,momentum,angular momentum,energy and species,to a set of non-linear ordinary differential equations(ODEs).The Runge-Kutta method along with shoot-ing method is used to solve them.The impact of several parameters is evaluated.It is shown that the micro-rota-tional velocity of thefluid rises with the micropolar factor.Moreover,the radiation parameter can have a remarkable influence on theflow and temperature profiles and on the angular momentum distribution.
文摘In this paper, the boundary layer stagnation-point slip flow and heat transfer towards a shrinking/stretching cylinder over a permeable surface is considered. The governing equations are first transformed into a system of non-dimensional equations via the non-dimensional variables, and then into self-similar ordinary differential equations before they are solved numerically using the shooting method. Numerical results are obtained for the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles for some values of the governing parameters, namely the velocity slip parameter (α), the thermal slip parameter (β), the curvature parameter (γ) and the velocity ratio parameter (c/a). The physical quantities of interest are the skin friction coefficient and the local Nusselt number measured by f’’(0) and –θ’(0), respectively. The numerical results show that the velocity slip parameter α increases the heat transfer rate at the surface, while the thermal slip parameter β decreases it. On the other hand, increasing the velocity slip parameter α causes the decrease in the flow velocity. Further, it is found that the solutions for a shrinking cylinder (c/ac/a>0) case. Finally, it is also found that the values of f’’(0) and –θ’(0) increase as the curvature parameter γ increases.
基金the Research Grant of University Kebangsaan Malaysia(No.GUP-2019-034)。
文摘The non-Newtonian fluid model reflects the behavior of the fluid flow in global manufacturing progress and increases product performance.Therefore,the present work strives to analyze the unsteady Maxwell hybrid nanofluid toward a stretching/shrinking surface with thermal radiation effect and heat transfer.The partial derivatives of the multivariable differential equations are transformed into ordinary differential equations in a specified form by applying appropriate transformations.The resulting mathematical model is clarified by utilizing the bvp4c technique.Different control parameters are investigated to see how they affect the outcomes.The results reveal that the skin friction coefficient increases by adding nanoparticles and suction parameters.The inclusion of the Maxwell parameter and thermal radiation effect both show a declining tendency in the local Nusselt number,and as a result,the thermal flow efficacy is reduced.The reduction of the unsteadiness characteristic,on the other hand,considerably promotes the improvement of heat transfer performance.The existence of more than one solution is proven,and this invariably leads to an analysis of solution stability,which validates the first solution viability.
文摘Time-dependent,two-dimensional(2 D)magnetohydrodynamic(MHD)micropolar nanomaterial flow over a shrinking/stretching surface near the stagnant point is considered.Mass and heat transfer characteristics are incorporated in the problem.A model of the partial differential expressions is altered into the forms of the ordinary differential equations via similarity transformations.The obtained equations are numerically solved by a shooting scheme in the MAPLE software.Dual solutions are observed at different values of the specified physical parameters.The stability of first and second solutions is examined through the stability analysis process.This analysis interprets that the first solution is stabilized and physically feasible while the second one is un-stable and not feasible.Furthermore,the natures of various physical factors on the drag force,skin-friction factor,and rate of mass and heat transfer are determined and interpreted.The micropolar nanofluid velocity declines with a rise in the suction and magnetic parameters,whereas it increases by increasing the unsteadiness parameter.The temperature of the micropolar nanofluid rises with increase in the Brownian motion,radiation,thermophoresis,unsteady and magnetic parameters,but it decreases against an increment in the thermal slip constraint and Prandtl number.The concentration of nanoparticles reduces against the augmented Schmidt number and Brownian movement values but rises for incremented thermophoresis parameter values.
基金funded by King Mongkut’s University of Technology North Bangkok with Contract no.KMUTNB-Post-65-07。
文摘Hybrid nanofluids are remarkable functioning liquids that are intended to reduce the energy loss while maximizing the heat transmission.In the involvement of suction and nonlinear thermal radiation effects,this study attempted to explore the energy transmission features of the inclined magnetohydrodynamic(MHD)stagnation flow of CNTs-hybrid nanofluid across the nonlinear permeable stretching or shrinking sheet.This work also included some noteworthy features like chemical reactions,variable molecular diffusivity,quadratic convection,viscous dissipation,velocity slip and heat omission assessment.Employing appropriate similarity components,the model equations were modified to ODEs and computed by using the HAM technique.The impact of various relevant flow characteristics on movement,heat and concentration profiles was investigated and plotted on a graph.Considering various model factors,the significance of drag friction,heat and mass transfer rate were also computed in tabular and graphical form.This leads to the conclusion that such factors have a considerable impact on the dynamics of fluid as well as other engineering measurements of interest.Furthermore,viscous forces are dominated by increasing the values ofλ_(p),δ_(m)andδ_(q),and as a result,F(ξ)accelerates while the opposite trend is observed for M andφ.The drag friction is boosted by the augmentation M,λ_(p)andφ,but the rate of heat transfer declined.According to our findings,hybrid nanoliquid effects dominate that of ordinary nanofluid in terms of F(ξ),Θ(ξ)andφ(ξ)profiles.The HAM and the numerical technique(shooting method)were found to be in good agreement.
文摘Magnetohydrodynamic(MHD)radiative chemically reactive mixed convection flow of a hybrid nanofluid(Al_(2)O_(3)–Cu/H_(2)O)across an inclined,porous,and stretched sheet is examined in this study,along with its unsteady heat and mass transport properties.The hybrid nanofluid’s enhanced heat transfer efficiency is a major benefit in high-performance engineering applications.It is composed of two separate nanoparticles suspended in a base fluid and is chosen for its improved thermal properties.Thermal radiation,chemical reactions,a transverse magnetic field,surface stretching with time,injection or suction through the porous medium,and the effect of inclination,which introduces gravity-induced buoyancy forces,are all important physical phenomena that are taken into account in the analysis.A system of nonlinear ordinary differential equations(ODEs)is derived from the governing partial differential equations for mass,momentum,and energy by applying suitable similarity transformations.This simplifies the modeling procedure.The bvp4c solver in MATLAB is then used to numerically solve these equations.Different governing parameters modify temperature,concentration,and velocity profiles in graphs and tables.These factors include radiation intensity,chemical reaction rate,magnetic field strength,unsteadiness,suction/injection velocity,inclination angle,and nanoparticle concentration.A complex relationship between buoyancy and magnetic factors makes hybrid nanofluids better at heat transmission than regular ones.Thermal systems including cooling technologies,thermal coatings,and electronic heat management benefit from these findings.
文摘This comprehensive research examines the dynamics of magnetohydrodynamic(MHD)flow and heat transfer within a couple stress fluid.The investigation specifically focuses on the fluid’s behavior over a vertical stretching sheet embedded within a porous medium,providing valuable insights into the complex interactions between fluid mechanics,thermal transport,and magnetic fields.This study accounts for the significant impact of heat generation and thermal radiation,crucial factors for enhancing heat transfer efficiency in various industrial and technological contexts.The research employs mathematical techniques to simplify complex partial differential equations(PDEs)governing fluid flow and heat transfer.Specifically,suitable similarity transformations are applied to convert the PDEs into a more manageable system of ordinary differential equations(ODEs).The homotopy perturbation method(HPM)is employed to derive approximate analytical solutions for the problem.The influences of key parameters,such as magnetic field strength,heat generation,thermal radiation,porosity,and couple stress,on velocity and temperature profiles are analyzed and discussed.Findings indicate that the mixed convection parameter positively affects flow velocity,while the magnetic field parameter significantly alters the flow dynamics,exhibiting an inverse relationship.Further,this type of flow behavior model is relevant to real-world systems like cooling of nuclear reactors and oil extraction through porous formations,where magnetic and thermal effects are significant.
文摘In this paper,the authors examine various slip effects on themagnetic field and thermal radiative impacts on the flow,mass and heat transfer of a Jeffrey nanofluid over a 2-dimensional inclined stretching sheet by a porous media.The offered work is modelled to be in the form of a combination of coupled highly nonlinear partial differential equations in dimensional contexts.Governing equations were obtained,dimensionless parameters were defined in terms of similarity parameters,and the solutionswere obtained by the Homotopy Analysis Method(HAM).The analysis is significant as the effects of viscosity are identified and the important parameters are to be determined that could eventually control a type of flowbehaviour,especially in promoting the flowand inhibiting flowof velocity,temperature,and concentrations.The findings show that such an increase in themagnetic parameter decreases the velocity profile by approximately 15%due to more Lorentz forces,and thermal radiation increases the temperature profile by up to 25%,therefore,enhancing the rate of heat transfer.The process of Brownian motion and thermophoresis increases the depth of the thermal boundary layer by 10–20 percent and reduces in concentration profiles by 12 percent when the Brownian motion parameter increases.A velocity slip parameter lowers the velocity field by about 18 percent,and a parameter of permeability lowers the momentum of flow by another 10 percent.The HAM solutions show very high accuracy levels,having an order of convergence at level 15 and errormargins are well below 0.01 percent compared to the earlier studies.All these findings can provide profound knowledge in improving heat transmission in non-Newtonian fluid systems and can be used in biomedical engineering,thermal insulation,and industrial processes such as polymer extrusion and cooling technology.Principles of heat and mass transfer give us the crucial foundation on which to study the behavior of heat andmaterial flows in other engineering and scientific disciplines.Such principles apply to various fields of study,including the following engineering fields:mechanical,chemical,aerospace,civil,and environmental.
基金funded by a Fundamental Research Grant Scheme(FRGS/1/2022/STG06/UITM/02/15)from the Ministry of Higher Education.
文摘Fluid flow and transmission of heat have grown in importance in technology nowadays,and development is necessary to raise the technology standard to be on track with current advancements.This work,therefore,attempts to ascertain the effects on fluid flow and transmission of heat across a permeable horizontal shrinking/stretching sheet of the viscous dissipation,and the temperature and velocity slip parameters.Dusty hybrid nanofluids were developed by scaterring copper and alumina nanoparticles along with dust particles into water.The programmed solver in MATLAB,referred to as bvp4c,has been utilized to generate numerical results of the similarity equations produced by simplifying the governing equations using the boundary layer approximation and the similarity transformation approach.The findings show that the rise in Eckert number lowers the heat transfer efficiency by 62.82%for the first solution.Interestingly,the Nusselt number becomes negative in the presence of viscous dissipation for the first and second solutions,with the influence of slip parameters,suggesting that heat is transferred from the fluid to the surface.Additionally,for certain values of shrinking surfaces,dual solutions are achievable.Thus,to sum up,modifying the parameters such as viscous dissipation and slip parameters significantly impacts the rate of heat transmission.
