An integrated calculated approach based on weakly coupled finite element(FEM)-viscoplastic selfconsistent(VPSC)model was established to simulate the texture evolution during the variable strain path extrusion process ...An integrated calculated approach based on weakly coupled finite element(FEM)-viscoplastic selfconsistent(VPSC)model was established to simulate the texture evolution during the variable strain path extrusion process of magnesium alloys.The spiral die extrusion(SDE)process with additional circumferential shear deformation was applied to investigate the effect of path control on texture adjustment and verify the accuracy of the model.The results indicated that the additional spiral shear resulting from the overall inclined flow path effectively reduced the intensity of the{0002}//ED fiber texture by suppressing basal slip activation in the core area,while the local shear deformation along the spiral equal channel strain path led to the formation of an inclined{0002}//ND plane texture on the side.Using the modified Hall-Petch relationship,the correlation between texture and yield strength was quantified.Specifically,the weakening of the texture effectively suppressed{10-12}tensile twinning,which compensated for the deficiency of compressive yield strength without significantly sacrificing tensile yield strength,and thus improved the tension-compression asymmetry.Furthermore,the strongly inclined{0002}//ND plane texture inhibited the widespread activation of basal slip during tensile yielding,thereby enhancing the yield strength.展开更多
We have established an elastoplastic analysis model to explore the effect of loading path in an incompressible thin-walled tube under the combined action of axial force and torque based on Mises yield condition and is...We have established an elastoplastic analysis model to explore the effect of loading path in an incompressible thin-walled tube under the combined action of axial force and torque based on Mises yield condition and isotropic linear hardening assumption.Further,four stress areas(σx,τx)are divided according to the characteristics of the final stress,and the plastic stress-strain relationship of twelve stress paths in different stress areas is derived.The"primary effect"of the stress path on plastic strain is demonstrated,namely,the plastic strain caused by the pre-loaded stress in path A(tensile stress is initially applied,followed by shear stress)is always greater than that caused by the post-loaded stress in path C(shear stress is initially applied,followed by tensile stress)irrespective of the value of final stress.The"recency effect"of the strain path on the stress is also established,which indicates that the stress caused by the post-loaded strain in path A is always greater than that caused by the pre-loaded strain in path C irrespective of the value of final strain.From the perspective of deformation,the"primary effect"of the stress path on the plastic strain and the"recency effect"of the strain path on the stress are unified.These effects are succinct and universal,and they provide useful insights on the plastic stress-strain relationship under different loading paths.Furthermore,they can serve as a useful reference for optimizing the processing technologies and construction procedures.展开更多
Flat workpieces have been tested in order to investigate the influence of stress path change （loading mode） while keeping strain path unchanged. These investigations are pertinent to the testing of cold rolled strip...Flat workpieces have been tested in order to investigate the influence of stress path change （loading mode） while keeping strain path unchanged. These investigations are pertinent to the testing of cold rolled strips and to subsequent forming. The workpieces which first compressed by plane strain compression in thickness direction were then tested in perpendicular direction in order to measure the influence of strain and stress path. The tension workpieces came from flat die compression test at different deformation histories. Two different materials were investigated： 18/8 Ti stainless steel and AW-1050 aluminium. The results show that the plastic flow by tension in lengthwise direction after pre-strain by compression in thickness direction will begin at an appreciably lower stress than that of the workpieces unloaded after pre-compression. Comparing with two materials, it can be seen that both 18/8 Ti stainless steel and AW-1050 aluminium behave similarly. The drop in yield stress is lower for AW-1050 aluminium than that for 18/8 Ti stainless steel. However, reloading in different directions than in the precious step results in significantly higher strain hardening.展开更多
Susceptibility of the steel for further cold processing strongly depends on the whole prior history of deformation in the hot working regime.In the industrial hot working processes,e.g.at the roughing stage of hot rol...Susceptibility of the steel for further cold processing strongly depends on the whole prior history of deformation in the hot working regime.In the industrial hot working processes,e.g.at the roughing stage of hot rolling,or forging,material undergoes complex deformation modes that leads to gradients of both microstructure and properties across the deformed cross-section.Torsion and multiaxial compression tests with different amounts of strain reversals were conducted at elevated temperatures to study the effect of applied strain path on the phenomena occurring during microstructure evolution of Nb-microalloyed steels.Gathered results will provide data for the modification of existing constitutive equations that mostly do not account for the strain path changes.Better through-process modelling will then enable to achieve better properties and quality of the products for further cold processing.展开更多
According to the deformation state in skin stretch forming, an experiment was investigated to determine the critical strain, which make the slip line occur, and the strain criteria under different strain paths are obt...According to the deformation state in skin stretch forming, an experiment was investigated to determine the critical strain, which make the slip line occur, and the strain criteria under different strain paths are obtained. The uniaxial tension tests of different specimens were carried out to determine the critical strains of different strain paths. Then, the slip line limited curve(SLC) is available from these critical strains. Two kinds of aluminum alloys, 2024-T3 and 2524-T3, were studied, and two SLCs are gained. The application of the SLC to an airplane skin stretch forming simulation was investigated, and the results show that the SLC can be used to control the slip lines occurring in practice.展开更多
Here is proposed the principle of interaction between plastic volumetric and shear strains, revealing the main origin of generating the complexity and variety of deformations for geotechnical materials. Here are also ...Here is proposed the principle of interaction between plastic volumetric and shear strains, revealing the main origin of generating the complexity and variety of deformations for geotechnical materials. Here are also explained the manners of the interaction between plastic volumetric and shear strains and the conditions of generating shear dilatancy. It is demonstrated that dependency of the stress path exists and is a combination of effects of this interaction. According to this principle, it is theoretically proved that the space critical state line exists, and is unique and independent of the stress history. Based on this principle, the constitutive models that are able completely and accurately to characterize the basic behavior features for geotechnical materials have been constructed within the framework of thermodynamics. What is determined is a general expression of the constitutive relation as well as the inequality of the dissipative potential increment for obeying the second law of thermodynamics.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.51975146,52205344)Shandong Province Natural Science Foundation(Grant No.ZR2020QE171)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)(Nos.NRF-2021R1A2C3006662,NRF-2022R1A5A1030054).
文摘An integrated calculated approach based on weakly coupled finite element(FEM)-viscoplastic selfconsistent(VPSC)model was established to simulate the texture evolution during the variable strain path extrusion process of magnesium alloys.The spiral die extrusion(SDE)process with additional circumferential shear deformation was applied to investigate the effect of path control on texture adjustment and verify the accuracy of the model.The results indicated that the additional spiral shear resulting from the overall inclined flow path effectively reduced the intensity of the{0002}//ED fiber texture by suppressing basal slip activation in the core area,while the local shear deformation along the spiral equal channel strain path led to the formation of an inclined{0002}//ND plane texture on the side.Using the modified Hall-Petch relationship,the correlation between texture and yield strength was quantified.Specifically,the weakening of the texture effectively suppressed{10-12}tensile twinning,which compensated for the deficiency of compressive yield strength without significantly sacrificing tensile yield strength,and thus improved the tension-compression asymmetry.Furthermore,the strongly inclined{0002}//ND plane texture inhibited the widespread activation of basal slip during tensile yielding,thereby enhancing the yield strength.
基金Project(51979280)supported by the National Natural Science Foundation of ChinaProjects(2016M602972,2018M643852)supported by the Postdoctoral Science Foundation of China。
文摘We have established an elastoplastic analysis model to explore the effect of loading path in an incompressible thin-walled tube under the combined action of axial force and torque based on Mises yield condition and isotropic linear hardening assumption.Further,four stress areas(σx,τx)are divided according to the characteristics of the final stress,and the plastic stress-strain relationship of twelve stress paths in different stress areas is derived.The"primary effect"of the stress path on plastic strain is demonstrated,namely,the plastic strain caused by the pre-loaded stress in path A(tensile stress is initially applied,followed by shear stress)is always greater than that caused by the post-loaded stress in path C(shear stress is initially applied,followed by tensile stress)irrespective of the value of final stress.The"recency effect"of the strain path on the stress is also established,which indicates that the stress caused by the post-loaded strain in path A is always greater than that caused by the pre-loaded strain in path C irrespective of the value of final strain.From the perspective of deformation,the"primary effect"of the stress path on the plastic strain and the"recency effect"of the strain path on the stress are unified.These effects are succinct and universal,and they provide useful insights on the plastic stress-strain relationship under different loading paths.Furthermore,they can serve as a useful reference for optimizing the processing technologies and construction procedures.
文摘Flat workpieces have been tested in order to investigate the influence of stress path change （loading mode） while keeping strain path unchanged. These investigations are pertinent to the testing of cold rolled strips and to subsequent forming. The workpieces which first compressed by plane strain compression in thickness direction were then tested in perpendicular direction in order to measure the influence of strain and stress path. The tension workpieces came from flat die compression test at different deformation histories. Two different materials were investigated： 18/8 Ti stainless steel and AW-1050 aluminium. The results show that the plastic flow by tension in lengthwise direction after pre-strain by compression in thickness direction will begin at an appreciably lower stress than that of the workpieces unloaded after pre-compression. Comparing with two materials, it can be seen that both 18/8 Ti stainless steel and AW-1050 aluminium behave similarly. The drop in yield stress is lower for AW-1050 aluminium than that for 18/8 Ti stainless steel. However, reloading in different directions than in the precious step results in significantly higher strain hardening.
基金Financial support from the Polish Ministry of Science and Higher Education (grant no. N508 398237)the financial support provided by the EPSRC UK, under grant EP/F023464/1
文摘Susceptibility of the steel for further cold processing strongly depends on the whole prior history of deformation in the hot working regime.In the industrial hot working processes,e.g.at the roughing stage of hot rolling,or forging,material undergoes complex deformation modes that leads to gradients of both microstructure and properties across the deformed cross-section.Torsion and multiaxial compression tests with different amounts of strain reversals were conducted at elevated temperatures to study the effect of applied strain path on the phenomena occurring during microstructure evolution of Nb-microalloyed steels.Gathered results will provide data for the modification of existing constitutive equations that mostly do not account for the strain path changes.Better through-process modelling will then enable to achieve better properties and quality of the products for further cold processing.
基金Project(K0604020509) supported by Chengdu Aircraft Industrial Co. Ltd and National Foundation of Research of China
文摘According to the deformation state in skin stretch forming, an experiment was investigated to determine the critical strain, which make the slip line occur, and the strain criteria under different strain paths are obtained. The uniaxial tension tests of different specimens were carried out to determine the critical strains of different strain paths. Then, the slip line limited curve(SLC) is available from these critical strains. Two kinds of aluminum alloys, 2024-T3 and 2524-T3, were studied, and two SLCs are gained. The application of the SLC to an airplane skin stretch forming simulation was investigated, and the results show that the SLC can be used to control the slip lines occurring in practice.
文摘Here is proposed the principle of interaction between plastic volumetric and shear strains, revealing the main origin of generating the complexity and variety of deformations for geotechnical materials. Here are also explained the manners of the interaction between plastic volumetric and shear strains and the conditions of generating shear dilatancy. It is demonstrated that dependency of the stress path exists and is a combination of effects of this interaction. According to this principle, it is theoretically proved that the space critical state line exists, and is unique and independent of the stress history. Based on this principle, the constitutive models that are able completely and accurately to characterize the basic behavior features for geotechnical materials have been constructed within the framework of thermodynamics. What is determined is a general expression of the constitutive relation as well as the inequality of the dissipative potential increment for obeying the second law of thermodynamics.
