As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrog...As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.展开更多
Pitch is an excellent precursor for the production of hard carbon,with pre-oxidation crucial process in the fabrication.The structural changes in the different molecular components of pitch during thermochemical treat...Pitch is an excellent precursor for the production of hard carbon,with pre-oxidation crucial process in the fabrication.The structural changes in the different molecular components of pitch during thermochemical treatment are a key factor in determining the sodium-ion storage of pitchbased hard carbon anodes.We investigated the effects of the different molecular structures in the asphaltene precursor,including aromatic rings and aliphatic chains,on the sodiumion storage behavior of the resulting carbon.We found that polar oxygen functional groups limit the steric hindrance caused by the aromatic rings in pitch,and thus facilitate the introduction of cross-linked structures.During high-temperature carbonization,aromatic rings form a rigid carbon framework that prevents the rearrangement of ordered carbon layers,leading to a short-range disordered carbon structure and promotes the production of closed pores.For example,a material prepared from asphaltene,which contains a large number of oxygen-containing functional groups and macromolecular aromatic rings,using pre-oxidation at 300℃ and carbonization at 1200℃ had a reversible capacity of 316.7 mAh g^(−1) when used as the anode for sodium ion batteries.Our research provides a theoretical basis for the selection of raw materials for the development of high-quality pitch-based hard carbons.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Aqueous sodium-ion batteries(ASIBs)have attracted great attention in aqueous batteries due to their merit of high safety.However,the constrained work potential and insufficient chemical stability of anode materials in...Aqueous sodium-ion batteries(ASIBs)have attracted great attention in aqueous batteries due to their merit of high safety.However,the constrained work potential and insufficient chemical stability of anode materials in aqueous electro-lytes hinder the large-scale application of ASIBs.Sodium titanium phosphate,NaTi_(2)(PO_(4))_(3)(NTP),is considered one of the most promising anode materials for ASIBs due to its excellent electrochemical performance and tunable structure.Recently,great achievements have been made in the development of NTP,however,a comprehensive review of existing studies is still lacking.This article firstly introduces the basic properties of NTP and analyzes the existing challenges.Subsequently,it will provide a comprehensive overview of the key strategies related to the design and modification of NTP materials with optimized electrochemical performance.Finally,based on the current research status and practical needs,suggestions,and future perspectives for advancing NTP in practical applications of ASIBs are presented.This review aims to guide the future research trajectory from basic material innovation to industrial applications,thus promoting the large-scale commercializa-tion of ASIBs.展开更多
In response to the actual demands of the energy storage type organic Rankine power generation cycle,this study proposes a new type of jacketed shell and tube heat exchanger with integrated cold storage and heat exchan...In response to the actual demands of the energy storage type organic Rankine power generation cycle,this study proposes a new type of jacketed shell and tube heat exchanger with integrated cold storage and heat exchange.N-tedecane is selected as the phase change material for cold storage,low-temperature water as the cold source,and R134a as the heat source.The phase change material for cold storage is filled inside the jacket tube of the heat exchanger.Cold fluid is introduced into the inner tube to cause the phase change material to condense and store cold.After the cold storage is completed,R134a flows in from the shell side and condenses through heat exchange with the solidified phase change material for energy storage.This study discusses the influence laws of different cold water mass flow rates and temperatures on the cold storage performance of this heat exchanger,and analyzes the condensation effect of R134a.The results show that when the mass flow rate is 0.5 kg/s and the cold water temperature is between 3 and 4℃,the average power of the energy storage heat exchanger in the condensation experiment is 80W,and the average convective heat transfer coefficient is 110.73 W/(m^(2)⋅K).This research provides an experimental basis for the development of energy storage organic Rankine power generation cycles.展开更多
Unsecured legacy wells pose significant risks to carbon capture and storage(CCS)as they present potential leakage pathways for stored CO_(2) to return to the atmosphere.In the UK,legacy wells must be assessed for a ca...Unsecured legacy wells pose significant risks to carbon capture and storage(CCS)as they present potential leakage pathways for stored CO_(2) to return to the atmosphere.In the UK,legacy wells must be assessed for a carbon storage permit to be granted and high-risk wells require costly remediation.We use a well risk assessment scheme to evaluate the risk of wells in the Southern North Sea.We then combine our well risk assessment with investigation using the analytical tool CO2BLOCK,which relies on a gravity current model to estimate pressure and plume migration distances.We evaluate the Viking,Camelot and Poseidon projects,which plan to inject CO_(2) into the depleted reservoirs of Southern North Sea gas fields.Carbon dioxide plumes are typically several kilometers wide,and it should be possible to avoid plume migration to high-risk legacy wells.In contrast,pressure fields produced by CO_(2) injection are tens of kilometers wide and low magnitude pressure increases frequently extend beyond the bounds of storage licence areas.The pressure fields encounter hundreds of wells and in the cases of the Camelot and Poseidon projects,interact with each other.展开更多
A batch of important national standards for CCUS released.Recently,State Administration for Market Regulation(SAMR)and National Standardization Administration of China(SAC)released 12 national standards for carbon cap...A batch of important national standards for CCUS released.Recently,State Administration for Market Regulation(SAMR)and National Standardization Administration of China(SAC)released 12 national standards for carbon capture,utilization and storage(CCUS),which will come into effect on July 1,2026.展开更多
Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Her...Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Herein,a MOF derived multi-phase FeNi_(3)-S catalyst was specially designed for efficient hydrogen storage in MgH_(2).Experiments confirmed that the incorporation of FeNi_(3)-S into MgH_(2) significantly lowered the desorption temperature and accelerated the kinetics of hydrogen desorption and reabsorption.The initial dehydrogenation temperature of the MgH_(2)+10 wt% FeNi_(3)-S composite was 202 ℃,which was 123 ℃ lower than that of pure MgH_(2).At 325 ℃,the MgH_(2)+10 wt% FeNi_(3)-S composite released 6.57 wt% H_(2)(fully dehydrogenated) within 1000 s.Remarkably,MgH_(2)+ 10 wt% FeNi_(3)-S composite initiated rehydrogenation at room temperature and rapidly absorbed 2.49 wt% H_(2) within 30 min at 100 ℃.Moreover,6.3 wt% H_(2) was still retained after 20 cycles at 300 ℃,demonstrating the superior cycling performance of the MgH_(2)+10 wt% FeNi_(3)-S composite.The activation energy fitting calculations further evidenced the addition of FeNi_(3)-S enhanced the de/resorption kinetics of MgH_(2)(E_(a)= 98.6 k J/mol and 43.3 k J/mol,respectively).Through phase and microstructural analysis,it was determined that the exceptional hydrogen storage performance of the composite was attributed to the in-situ formation of Mg/Mg_(2)Ni + Fe/MgS and MgH_(2)/Mg_(2)NiH_(4)+Fe/MgS hydrogen storage systems.Further mechanistic analysis revealed that Mg_(2)Ni/Mg_(2)NiH_(4) served as “hydrogen pump” and Fe/Mg S served as “hydrogen diffusion channel”,thus accelerating the dissociation and recombination of hydrogen molecules.In conclusion,this work offers insight into catalysts combining transition metal alloys and transition metal sulfide for exerting muti-phase synergistic effect on boosting the dehydrogenation/hydrogenation reactions of MgH_(2),which can also inspire future pioneering work on designing and fabricating high efficient catalysts in other energy storage related areas.展开更多
This paper presents an experimental analysis of a solar-assisted powered underfloor heating system,designed primarily to boost energy efficiency and achieve reliable desired steady-state temperature in buildings.We th...This paper presents an experimental analysis of a solar-assisted powered underfloor heating system,designed primarily to boost energy efficiency and achieve reliable desired steady-state temperature in buildings.We thoroughly tested the system’s thermal and operational features by subjecting it to three distinct scenarios that mimicked diverse solar irradiance and environmental conditions.Our findings reveal a strong correlation between variations in solar input and overall system performance.The Solar Fraction(SF),our key energy efficiency metric,varied significantly across the cases,ranging from 63.1%up to 88.7%.This high reliance on renewables resulted in a substantial reduction in backup power;consequently,the auxiliary electric heater was only required to supply between 1.82 and 3.00 kWh over the test periods.The circulation pump operated on a precise control logic,engaging below 20℃ and disengaging at 21℃.Crucially,the experiments verified the system’s ability not only tomeet the air temperature setpoint but also to ensure the floor surface temperature stayed within required international comfort criteria.These robust results directly support the study’s main objective.For practical application,we advise increasing the total length of the embedded pipe network.This crucial adjustment would allow for a reduction in the required circulating water temperature,which in turn maximizes the utilization of low-grade solar heat and optimizes radiant heat delivery toward achieving the desired steady-state temperature.Ultimately,the study confirms that solar-assisted underfloor heating offers a technically viable,sustainable,and energy-efficient solution with the potential to significantly cut fossil fuel consumption.展开更多
Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into por...Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.展开更多
With the rapid expansion of the Internet of Things(IoT),user data has experienced exponential growth,leading to increasing concerns about the security and integrity of data stored in the cloud.Traditional schemes rely...With the rapid expansion of the Internet of Things(IoT),user data has experienced exponential growth,leading to increasing concerns about the security and integrity of data stored in the cloud.Traditional schemes relying on untrusted third-party auditors suffer from both security and efficiency issues,while existing decentralized blockchain-based auditing solutions still face shortcomings in correctness and security.This paper proposes an improved blockchain-based cloud auditing scheme,with the following core contributions:Identifying critical logical contradictions in the original scheme,thereby establishing the foundation for the correctness of cloud auditing;Designing an enhanced mechanism that integrates multiple hashing with dynamic aggregate signatures,binding encrypted blocks through bilinear pairings and BLS signatures,and improving the scheme by setting parameters based on the Computational Diffie-Hellman(CDH)problem,significantly strengthening data integrity protection and anti-forgery capabilities;Introducing a random challenge mechanism and dynamic parameter adjustment strategy,effectively resisting various attacks such as forgery,tampering,and deletion,significantly improving the detection probability of malicious Cloud Service Providers(CSPs),and significantly reducing the proof generation overhead for CSPswhilemaintaining the same computational cost forDataOwners.Theoretical analysis and performance evaluation experiments demonstrate that the proposed scheme achieves significant improvements in both security and efficiency.Finally,the paper explores potential applications of the Enhanced Security Scheme in fields such as healthcare,drone swarms,and government office attendance systems,providing an effective approach for building secure,efficient,and decentralized cloud auditing systems.展开更多
Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artific...Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.展开更多
Sichuan sausages with moisture contents of 40%,45%,50%,and 60% were stored at-18℃for durations of 0,2,4,6,and 8 weeks to evaluate the effect of moisture content on the quality attributes of Sichuan sausages during fr...Sichuan sausages with moisture contents of 40%,45%,50%,and 60% were stored at-18℃for durations of 0,2,4,6,and 8 weeks to evaluate the effect of moisture content on the quality attributes of Sichuan sausages during frozen storage.Product indicators including pH,colour,thiobarbituric acid reactive substances(TBARS),total volatile basic nitrogen(TVB-N),texture,electronic nose(E-nose)response,and water-holding capacity(thawing and cooking losses)were determined.The results indicated that as storage time increased,water retention in Sichuan sausages with different moisture contents decreased,while the degree of protein and lipid oxidation increased.This led to an increase in pH value,a colour shift from red-bright to grey-brown,and a deterioration in palatability.Among the samples,sausages with 50% moisture content exhibited the lowest thawing and cooking losses,indicating superior water-holding capacity.After 8 weeks of storage,TBARS and TVB-N values for the 50% moisture group were 19.5%and 2.5%lower,respectively,than those of the 40%and 45%moisture groups,indicating a reduced degree of oxidation.Furthermore,Sichuan sausage with 50%moisture content demonstrated an appropriate pH and colour difference,along with excellent texture and flavour,as evidenced by its higher toughness and satisfactory hardness.In conclusion,Sichuan sausage with 50% moisture content demonstrated the highest overall quality under frozen storage conditions.展开更多
Developing efficient catalysts is pivotal for advancing MgH_(2)-based hydrogen storage systems.In this study,a novel catalyst,graphene oxide-supported oxygen vacancy-rich Co_(3)O_(4)and Ni nanoparticles(Ni-OV-C@GO),wa...Developing efficient catalysts is pivotal for advancing MgH_(2)-based hydrogen storage systems.In this study,a novel catalyst,graphene oxide-supported oxygen vacancy-rich Co_(3)O_(4)and Ni nanoparticles(Ni-OV-C@GO),was synthesized to enhance the hydrogen storage performance of MgH_(2).The catalyst dramatically improved the kinetics of MgH_(2),lowering the initial hydrogen desorption temperature of Ni-OV-C@GO-MgH_(2)-7 to 438 K,which is 386 K lower than that of as-milled MgH_(2).The composite achieved 5.0 wt%hydrogen absorption at 423 K within 600 s and retained 97.3%capacity after 30 cycles.Notably,the activation energy for H_(2)desorption was reduced to 40.78 kJ/mol,an 80%decrease compared to pristine MgH_(2).The in-situ formation of CoMg_(2)/CoMg_(2)H_(5)and Mg_(2)Ni/Mg_(2)NiH_(4)acted as“hydrogen pumps”,facilitating multiple hydrogen transfer pathways.Additionally,oxygen vacancies elongated Mg-H bonds,enhancing dehydrogenation kinetics through catalytic effects.These findings provide valuable insights into improving hydrogen adsorption and desorption kinetics in MgH_(2)-based systems.展开更多
The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and fla...The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and flammability,as well as performance degradation due to uncontrollable dendrite growth in liquid electrolytes,have been limiting the further development of energy storage devices.In this regard,gel polymer electrolytes(GPEs)based on lignocellulosic(cellulose,hemicellulose,lignin)have attracted great interest due to their high thermal stability,excellent electrolyte wettability,and natural abundance.Therefore,in this critical review,a comprehensive overview of the current challenges faced by GPEs is presented,followed by a detailed description of the opportunities and advantages of lignocellulosic materials for the fabrication of GPEs for energy storage devices.Notably,the key properties and corresponding construction strategies of GPEs for energy storage are analyzed and discussed from the perspective of lignocellulose for the first time.Moreover,the future challenges and prospects of lignocellulose-mediated GPEs in energy storage applications are also critically reviewed and discussed.We sincerely hope this review will stimulate further research on lignocellulose-mediated GPEs in energy storage and provide meaningful directions for the strategy of designing advanced GPEs.展开更多
Wood,once regarded primarily as a structural material,possesses rich physicochemical complexity that has long been underexplored.In the context of industrialization and carbon imbalance,it is now emerging as a renewab...Wood,once regarded primarily as a structural material,possesses rich physicochemical complexity that has long been underexplored.In the context of industrialization and carbon imbalance,it is now emerging as a renewable and multifunctional platform for green nanotechnologies.Recent advances in wood nanotechnology have enabled the transformation of natural wood into programmable substrates with tailored nanoarchitectures,establishing it as a representative class of bio-based nanomaterials.This review systematically categorizes wood-specific nanoengineering strategies—including thermal carbonization,laser-induced graphenization,targeted delignification,nanomaterial integration,and mechanical processing—highlighting their mechanisms and impacts on wood's multiscale structural and functional properties.Importantly,these functionalization strategies can be flexibly combined in a modular,“Lego-like”manner,enabling wood to be reconfigured and optimized for diverse application scenarios.We summarize recent progress in applying functionalized wood to sustainable technologies such as energy storage(e.g.,metal-ion batteries,Zn-air systems,supercapacitors),water treatment(e.g.,adsorption,photothermal filtration,catalytic degradation),and energy conversion(e.g.,solar evaporation,ionic thermoelectrics,hydrovoltaics,and triboelectric nanogenerators).These studies reveal how nanoengineered wood structures can enable efficient charge transport,selective adsorption,and enhanced light-to-heat conversion.Finally,the review discusses current challenges—such as scalable fabrication,material integration,and long-term environmental stability—and outlines future directions for the development of wood-based platforms in next-generation green energy and environmental systems.展开更多
Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties intro...Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties introduce distinctive hydrodynamic phenomena in hydrogen storage,one of which is fingering.Fingering could induce the fluid trapped in small clusters of pores,leading to a dramatic decrease in hydrogen saturation and a lower recovery rate.In this study,numerical simulations are performed at the microscopic scale to understand the evolution of hydrogen saturation and the impacts of injection and withdrawal cycles.Two sets of micromodels with different porosity(0.362 and 0.426)and minimum sizes of pore throats(0.362 mm and 0.181 mm)are developed in the numerical model.A parameter analysis is then conducted to understand the influence of injection velocity(in the range of 10^(-2)m/s to 10^(-5)m/s)and porous structure on the fingering pattern,followed by an image analysis to capture the evolution of the fingering pattern.Viscous fingering,capillary fingering,and crossover fingering are observed and identified under different boundary conditions.The fractal dimension,specific area,mean angle,and entropy of fingers are proposed as geometric descriptors to characterize the shape of the fingering pattern.When porosity increases from 0.362 to 0.426,the saturation of hydrogen increases by 26.2%.Narrower pore throats elevate capillary resistance,which hinders fluid invasion.These results underscore the importance of pore structures and the interaction between viscous and capillary forces for hydrogen recovery efficiency.This work illuminates the influence of the pore structures and the fluid properties on the immiscible displacement of hydrogen and can be further extended to optimize the injection strategy of hydrogen in underground hydrogen storage.展开更多
Micron-sized graphene sheets have been introduced as additives to enhance the lubricating capabilities of water.The tribological characteristics of the lubricants after preparation and storage for 6 months were system...Micron-sized graphene sheets have been introduced as additives to enhance the lubricating capabilities of water.The tribological characteristics of the lubricants after preparation and storage for 6 months were systematically analyzed.Results indicated that the friction coefficient and wear volume of the tribo-pair were reduced through the incorporation of a certain concentration of graphene sheets,and also have long-term storage stability.Notably,under the experimental conditions,a 0.2%mass concentration of graphene in the aqueous lubricant exhibited exceptional tribological performance and long-term storage stability,achieving an 80%reduction in friction coefficient and a 78%decrease in wear volume with a 14000-cycle friction test.Wear morphology analysis indicated that after adding graphene sheets to the aqueous solution,micro-plastic deformation occurs on the worn surface of the steel plate.The wear profile of the GCr15 counter ball changes from a circular profile to a rectangular-like profile.The main reason is that the graphene sheets in the aqueous solution can enter the contact interface during the friction process,hindering direct contact between the friction pair.The study prov-ides a simple method to improve the tribological properties of aqueous solutions stably for engineering applica-tions.展开更多
Photo-assisted flexible energy storage devices,combining photoelectric conversion and electrochemical energy storage,emerge as an innovative solution for sustainable energy systems.This review comprehensively summariz...Photo-assisted flexible energy storage devices,combining photoelectric conversion and electrochemical energy storage,emerge as an innovative solution for sustainable energy systems.This review comprehensively summarizes recent advances in photo-assisted flexible energy storage technology,covering material design,working mechanisms,and practical applications.We systematically examine diverse electrode materials,such as metal oxides,metal sulfides,organic photosensitive materials,and composites,emphasizing their roles in boosting device performance.Special focus is placed on emerging technologies—including heterostructure engineering,surface modification,and intelligent control systems—that have notably enhanced energy conversion efficiency and storage capacity.The review also discusses current challenges,such as material stability,conversion efficiency,and standardization,and proposes strategic directions for future development.Recent breakthroughs in photo-assisted supercapacitors,lithium-based batteries,zinc-based batteries,and other innovative storage systems are critically assessed,offering key insights into their practical application potential in wearable electronics,self-powered sensors,and beyond.This comprehensive analysis establishes a framework for understanding the current status of photo-assisted flexible energy storage technology and guides future research toward high-performance,sustainable energy storage solutions.展开更多
Nanoconfinement is a promising approach to simultaneously enhance the thermodynamics,kinetics,and cycling stability of hydrogen storage materials.The introduction of supporting scaffolds usually causes a reduction in ...Nanoconfinement is a promising approach to simultaneously enhance the thermodynamics,kinetics,and cycling stability of hydrogen storage materials.The introduction of supporting scaffolds usually causes a reduction in the total hydrogen storage capacity due to“dead weight.”Here,we synthesize an optimized N-doped porous carbon(rN-pC)without heavy metal as supporting scaffold to confine Mg/MgH_(2) nanoparticles(Mg/MgH_(2)@rN-pC).rN-pC with 60 wt%loading capacity of Mg(denoted as 60 Mg@rN-pC)can adsorb and desorb 0.62 wt%H_(2) on the rN-pC scaffold.The nanoconfined MgH_(2) can be chemically dehydrided at 175℃,providing~3.59 wt%H_(2) with fast kinetics(fully dehydrogenated at 300℃ within 15 min).This study presents the first realization of nanoconfined Mg-based system with adsorption-active scaffolds.Besides,the nanoconfined MgH_(2) formation enthalpy is reduced to~68 kJ mol^(−1) H_(2) from~75 kJ mol^(−1) H_(2) for pure MgH_(2).The composite can be also compressed to nanostructured pellets,with volumetric H_(2) density reaching 33.4 g L^(−1) after 500 MPa compression pressure,which surpasses the 24 g L^(−1) volumetric capacity of 350 bar compressed H_(2).Our approach can be implemented to the design of hybrid H_(2) storage materials with enhanced capacity and desorption rate.展开更多
基金Supported by Design and Performance Study of High-flux Metal Hydride Reactor Based on the Bionic Optimization(2078262)the‘Four-Chain’Integration Project at the Qinchuangyuan Chief Platform(S2025-YF-ZDXM)。
文摘As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.
文摘Pitch is an excellent precursor for the production of hard carbon,with pre-oxidation crucial process in the fabrication.The structural changes in the different molecular components of pitch during thermochemical treatment are a key factor in determining the sodium-ion storage of pitchbased hard carbon anodes.We investigated the effects of the different molecular structures in the asphaltene precursor,including aromatic rings and aliphatic chains,on the sodiumion storage behavior of the resulting carbon.We found that polar oxygen functional groups limit the steric hindrance caused by the aromatic rings in pitch,and thus facilitate the introduction of cross-linked structures.During high-temperature carbonization,aromatic rings form a rigid carbon framework that prevents the rearrangement of ordered carbon layers,leading to a short-range disordered carbon structure and promotes the production of closed pores.For example,a material prepared from asphaltene,which contains a large number of oxygen-containing functional groups and macromolecular aromatic rings,using pre-oxidation at 300℃ and carbonization at 1200℃ had a reversible capacity of 316.7 mAh g^(−1) when used as the anode for sodium ion batteries.Our research provides a theoretical basis for the selection of raw materials for the development of high-quality pitch-based hard carbons.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金supported by the Natural Sci-ence Foundation of Fujian Province (No.2024J011210)the High-Level Talent Start-Up Foundation of Xiamen Institute of Technology (No.YKJ23017R)。
文摘Aqueous sodium-ion batteries(ASIBs)have attracted great attention in aqueous batteries due to their merit of high safety.However,the constrained work potential and insufficient chemical stability of anode materials in aqueous electro-lytes hinder the large-scale application of ASIBs.Sodium titanium phosphate,NaTi_(2)(PO_(4))_(3)(NTP),is considered one of the most promising anode materials for ASIBs due to its excellent electrochemical performance and tunable structure.Recently,great achievements have been made in the development of NTP,however,a comprehensive review of existing studies is still lacking.This article firstly introduces the basic properties of NTP and analyzes the existing challenges.Subsequently,it will provide a comprehensive overview of the key strategies related to the design and modification of NTP materials with optimized electrochemical performance.Finally,based on the current research status and practical needs,suggestions,and future perspectives for advancing NTP in practical applications of ASIBs are presented.This review aims to guide the future research trajectory from basic material innovation to industrial applications,thus promoting the large-scale commercializa-tion of ASIBs.
基金the the basic scientific research Funds project of Heilongjiang Universities[grant numbers 2024-KYYWF-0554].
文摘In response to the actual demands of the energy storage type organic Rankine power generation cycle,this study proposes a new type of jacketed shell and tube heat exchanger with integrated cold storage and heat exchange.N-tedecane is selected as the phase change material for cold storage,low-temperature water as the cold source,and R134a as the heat source.The phase change material for cold storage is filled inside the jacket tube of the heat exchanger.Cold fluid is introduced into the inner tube to cause the phase change material to condense and store cold.After the cold storage is completed,R134a flows in from the shell side and condenses through heat exchange with the solidified phase change material for energy storage.This study discusses the influence laws of different cold water mass flow rates and temperatures on the cold storage performance of this heat exchanger,and analyzes the condensation effect of R134a.The results show that when the mass flow rate is 0.5 kg/s and the cold water temperature is between 3 and 4℃,the average power of the energy storage heat exchanger in the condensation experiment is 80W,and the average convective heat transfer coefficient is 110.73 W/(m^(2)⋅K).This research provides an experimental basis for the development of energy storage organic Rankine power generation cycles.
基金supported by the Natural Environment Research Council[grant number NE/S007415/1]Shell as iCASE sponsors。
文摘Unsecured legacy wells pose significant risks to carbon capture and storage(CCS)as they present potential leakage pathways for stored CO_(2) to return to the atmosphere.In the UK,legacy wells must be assessed for a carbon storage permit to be granted and high-risk wells require costly remediation.We use a well risk assessment scheme to evaluate the risk of wells in the Southern North Sea.We then combine our well risk assessment with investigation using the analytical tool CO2BLOCK,which relies on a gravity current model to estimate pressure and plume migration distances.We evaluate the Viking,Camelot and Poseidon projects,which plan to inject CO_(2) into the depleted reservoirs of Southern North Sea gas fields.Carbon dioxide plumes are typically several kilometers wide,and it should be possible to avoid plume migration to high-risk legacy wells.In contrast,pressure fields produced by CO_(2) injection are tens of kilometers wide and low magnitude pressure increases frequently extend beyond the bounds of storage licence areas.The pressure fields encounter hundreds of wells and in the cases of the Camelot and Poseidon projects,interact with each other.
文摘A batch of important national standards for CCUS released.Recently,State Administration for Market Regulation(SAMR)and National Standardization Administration of China(SAC)released 12 national standards for carbon capture,utilization and storage(CCUS),which will come into effect on July 1,2026.
基金supported by the National Key R&D Program of China (No.2022YFB3803703)the National Natural Science Foundation of China (Nos.52071141,52271212,52201250,51771056,22305104)+1 种基金the Natural Science Foundation of Jiangsu Province (No.BK20210893)the Ministry of Science and Technology of the People’s Republic of China (No.G2023014022L)。
文摘Magnesium hydride(MgH_(2)) demonstrates immense potential as a solid-state hydrogen storage material,while its commercial utilization is impeded by the elevated operating temperature and sluggish reaction kinetics.Herein,a MOF derived multi-phase FeNi_(3)-S catalyst was specially designed for efficient hydrogen storage in MgH_(2).Experiments confirmed that the incorporation of FeNi_(3)-S into MgH_(2) significantly lowered the desorption temperature and accelerated the kinetics of hydrogen desorption and reabsorption.The initial dehydrogenation temperature of the MgH_(2)+10 wt% FeNi_(3)-S composite was 202 ℃,which was 123 ℃ lower than that of pure MgH_(2).At 325 ℃,the MgH_(2)+10 wt% FeNi_(3)-S composite released 6.57 wt% H_(2)(fully dehydrogenated) within 1000 s.Remarkably,MgH_(2)+ 10 wt% FeNi_(3)-S composite initiated rehydrogenation at room temperature and rapidly absorbed 2.49 wt% H_(2) within 30 min at 100 ℃.Moreover,6.3 wt% H_(2) was still retained after 20 cycles at 300 ℃,demonstrating the superior cycling performance of the MgH_(2)+10 wt% FeNi_(3)-S composite.The activation energy fitting calculations further evidenced the addition of FeNi_(3)-S enhanced the de/resorption kinetics of MgH_(2)(E_(a)= 98.6 k J/mol and 43.3 k J/mol,respectively).Through phase and microstructural analysis,it was determined that the exceptional hydrogen storage performance of the composite was attributed to the in-situ formation of Mg/Mg_(2)Ni + Fe/MgS and MgH_(2)/Mg_(2)NiH_(4)+Fe/MgS hydrogen storage systems.Further mechanistic analysis revealed that Mg_(2)Ni/Mg_(2)NiH_(4) served as “hydrogen pump” and Fe/Mg S served as “hydrogen diffusion channel”,thus accelerating the dissociation and recombination of hydrogen molecules.In conclusion,this work offers insight into catalysts combining transition metal alloys and transition metal sulfide for exerting muti-phase synergistic effect on boosting the dehydrogenation/hydrogenation reactions of MgH_(2),which can also inspire future pioneering work on designing and fabricating high efficient catalysts in other energy storage related areas.
文摘This paper presents an experimental analysis of a solar-assisted powered underfloor heating system,designed primarily to boost energy efficiency and achieve reliable desired steady-state temperature in buildings.We thoroughly tested the system’s thermal and operational features by subjecting it to three distinct scenarios that mimicked diverse solar irradiance and environmental conditions.Our findings reveal a strong correlation between variations in solar input and overall system performance.The Solar Fraction(SF),our key energy efficiency metric,varied significantly across the cases,ranging from 63.1%up to 88.7%.This high reliance on renewables resulted in a substantial reduction in backup power;consequently,the auxiliary electric heater was only required to supply between 1.82 and 3.00 kWh over the test periods.The circulation pump operated on a precise control logic,engaging below 20℃ and disengaging at 21℃.Crucially,the experiments verified the system’s ability not only tomeet the air temperature setpoint but also to ensure the floor surface temperature stayed within required international comfort criteria.These robust results directly support the study’s main objective.For practical application,we advise increasing the total length of the embedded pipe network.This crucial adjustment would allow for a reduction in the required circulating water temperature,which in turn maximizes the utilization of low-grade solar heat and optimizes radiant heat delivery toward achieving the desired steady-state temperature.Ultimately,the study confirms that solar-assisted underfloor heating offers a technically viable,sustainable,and energy-efficient solution with the potential to significantly cut fossil fuel consumption.
文摘Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.
基金funded by the National Natural Science Foundation of China(New Design and Analysis of Fully Homomorphic Signatures,Grant No.62172436).
文摘With the rapid expansion of the Internet of Things(IoT),user data has experienced exponential growth,leading to increasing concerns about the security and integrity of data stored in the cloud.Traditional schemes relying on untrusted third-party auditors suffer from both security and efficiency issues,while existing decentralized blockchain-based auditing solutions still face shortcomings in correctness and security.This paper proposes an improved blockchain-based cloud auditing scheme,with the following core contributions:Identifying critical logical contradictions in the original scheme,thereby establishing the foundation for the correctness of cloud auditing;Designing an enhanced mechanism that integrates multiple hashing with dynamic aggregate signatures,binding encrypted blocks through bilinear pairings and BLS signatures,and improving the scheme by setting parameters based on the Computational Diffie-Hellman(CDH)problem,significantly strengthening data integrity protection and anti-forgery capabilities;Introducing a random challenge mechanism and dynamic parameter adjustment strategy,effectively resisting various attacks such as forgery,tampering,and deletion,significantly improving the detection probability of malicious Cloud Service Providers(CSPs),and significantly reducing the proof generation overhead for CSPswhilemaintaining the same computational cost forDataOwners.Theoretical analysis and performance evaluation experiments demonstrate that the proposed scheme achieves significant improvements in both security and efficiency.Finally,the paper explores potential applications of the Enhanced Security Scheme in fields such as healthcare,drone swarms,and government office attendance systems,providing an effective approach for building secure,efficient,and decentralized cloud auditing systems.
基金extend their gratitude to the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,for funding the publication of this work under the Ambitious Researcher program(Project No.KFU253806).
文摘Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.
基金Supported by National Modern Agricultural Industry Technology System Sichuan Pig Innovation Team(SCCXTD-2026-8)Sichuan Science and Technology Program(2025ZYD0049)"Challenge and Leadership"Project for Key Core Technologies of Sui Ning in Sichuan(2025SNKBZ19).
文摘Sichuan sausages with moisture contents of 40%,45%,50%,and 60% were stored at-18℃for durations of 0,2,4,6,and 8 weeks to evaluate the effect of moisture content on the quality attributes of Sichuan sausages during frozen storage.Product indicators including pH,colour,thiobarbituric acid reactive substances(TBARS),total volatile basic nitrogen(TVB-N),texture,electronic nose(E-nose)response,and water-holding capacity(thawing and cooking losses)were determined.The results indicated that as storage time increased,water retention in Sichuan sausages with different moisture contents decreased,while the degree of protein and lipid oxidation increased.This led to an increase in pH value,a colour shift from red-bright to grey-brown,and a deterioration in palatability.Among the samples,sausages with 50% moisture content exhibited the lowest thawing and cooking losses,indicating superior water-holding capacity.After 8 weeks of storage,TBARS and TVB-N values for the 50% moisture group were 19.5%and 2.5%lower,respectively,than those of the 40%and 45%moisture groups,indicating a reduced degree of oxidation.Furthermore,Sichuan sausage with 50%moisture content demonstrated an appropriate pH and colour difference,along with excellent texture and flavour,as evidenced by its higher toughness and satisfactory hardness.In conclusion,Sichuan sausage with 50% moisture content demonstrated the highest overall quality under frozen storage conditions.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB4003200)Nature Science Foundation of Guangxi(Grant No.2024GXNSFDA010044)the National Natural Science Foundation of China(Grant Nos.52101245,U20A20237,U24A2044).
文摘Developing efficient catalysts is pivotal for advancing MgH_(2)-based hydrogen storage systems.In this study,a novel catalyst,graphene oxide-supported oxygen vacancy-rich Co_(3)O_(4)and Ni nanoparticles(Ni-OV-C@GO),was synthesized to enhance the hydrogen storage performance of MgH_(2).The catalyst dramatically improved the kinetics of MgH_(2),lowering the initial hydrogen desorption temperature of Ni-OV-C@GO-MgH_(2)-7 to 438 K,which is 386 K lower than that of as-milled MgH_(2).The composite achieved 5.0 wt%hydrogen absorption at 423 K within 600 s and retained 97.3%capacity after 30 cycles.Notably,the activation energy for H_(2)desorption was reduced to 40.78 kJ/mol,an 80%decrease compared to pristine MgH_(2).The in-situ formation of CoMg_(2)/CoMg_(2)H_(5)and Mg_(2)Ni/Mg_(2)NiH_(4)acted as“hydrogen pumps”,facilitating multiple hydrogen transfer pathways.Additionally,oxygen vacancies elongated Mg-H bonds,enhancing dehydrogenation kinetics through catalytic effects.These findings provide valuable insights into improving hydrogen adsorption and desorption kinetics in MgH_(2)-based systems.
基金supported by the National Natural Science Foundation of China(32501592,32271814,32301530,32471806)Young Elite Scientist Sponsorship Program by Cast(No.YESS20230242)+3 种基金Natural Science Foundation of Tianjin(23JCZDJC00630,24JCZDJC00630)the China Postdoctoral Science Foundation(2023M740563)Tianjin Enterprise Technology Commissioner Project(25YDTPJC00690)China Scholarship Council(202408120091,202408120105).
文摘The pursuit of high energy density and sustainable energy storage devices has been the target of many researchers.However,safety issues such as the susceptibility of conventional liquid electrolytes to leakage and flammability,as well as performance degradation due to uncontrollable dendrite growth in liquid electrolytes,have been limiting the further development of energy storage devices.In this regard,gel polymer electrolytes(GPEs)based on lignocellulosic(cellulose,hemicellulose,lignin)have attracted great interest due to their high thermal stability,excellent electrolyte wettability,and natural abundance.Therefore,in this critical review,a comprehensive overview of the current challenges faced by GPEs is presented,followed by a detailed description of the opportunities and advantages of lignocellulosic materials for the fabrication of GPEs for energy storage devices.Notably,the key properties and corresponding construction strategies of GPEs for energy storage are analyzed and discussed from the perspective of lignocellulose for the first time.Moreover,the future challenges and prospects of lignocellulose-mediated GPEs in energy storage applications are also critically reviewed and discussed.We sincerely hope this review will stimulate further research on lignocellulose-mediated GPEs in energy storage and provide meaningful directions for the strategy of designing advanced GPEs.
基金supported by the National Key Research and Development(R&D)Plan(No.2023YFB3209203)National Natural Science Foundation of China(No.62333012,No.92248302)+3 种基金supported by Jiangsu Province Key Laboratory of Embodied Intelligence Robotics Technologythe Collaborative Innovation Center of Suzhou Nano Science&Technologythe 111 ProjectJoint International Research Laboratory of Carbon-Based Functional Materials and Devices。
文摘Wood,once regarded primarily as a structural material,possesses rich physicochemical complexity that has long been underexplored.In the context of industrialization and carbon imbalance,it is now emerging as a renewable and multifunctional platform for green nanotechnologies.Recent advances in wood nanotechnology have enabled the transformation of natural wood into programmable substrates with tailored nanoarchitectures,establishing it as a representative class of bio-based nanomaterials.This review systematically categorizes wood-specific nanoengineering strategies—including thermal carbonization,laser-induced graphenization,targeted delignification,nanomaterial integration,and mechanical processing—highlighting their mechanisms and impacts on wood's multiscale structural and functional properties.Importantly,these functionalization strategies can be flexibly combined in a modular,“Lego-like”manner,enabling wood to be reconfigured and optimized for diverse application scenarios.We summarize recent progress in applying functionalized wood to sustainable technologies such as energy storage(e.g.,metal-ion batteries,Zn-air systems,supercapacitors),water treatment(e.g.,adsorption,photothermal filtration,catalytic degradation),and energy conversion(e.g.,solar evaporation,ionic thermoelectrics,hydrovoltaics,and triboelectric nanogenerators).These studies reveal how nanoengineered wood structures can enable efficient charge transport,selective adsorption,and enhanced light-to-heat conversion.Finally,the review discusses current challenges—such as scalable fabrication,material integration,and long-term environmental stability—and outlines future directions for the development of wood-based platforms in next-generation green energy and environmental systems.
基金supported by the National Key Research and Development Project(Grant No.2023YFE0110900)the National Natural Science Foundation of China(Grant Nos.42320104003,42477168).
文摘Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties introduce distinctive hydrodynamic phenomena in hydrogen storage,one of which is fingering.Fingering could induce the fluid trapped in small clusters of pores,leading to a dramatic decrease in hydrogen saturation and a lower recovery rate.In this study,numerical simulations are performed at the microscopic scale to understand the evolution of hydrogen saturation and the impacts of injection and withdrawal cycles.Two sets of micromodels with different porosity(0.362 and 0.426)and minimum sizes of pore throats(0.362 mm and 0.181 mm)are developed in the numerical model.A parameter analysis is then conducted to understand the influence of injection velocity(in the range of 10^(-2)m/s to 10^(-5)m/s)and porous structure on the fingering pattern,followed by an image analysis to capture the evolution of the fingering pattern.Viscous fingering,capillary fingering,and crossover fingering are observed and identified under different boundary conditions.The fractal dimension,specific area,mean angle,and entropy of fingers are proposed as geometric descriptors to characterize the shape of the fingering pattern.When porosity increases from 0.362 to 0.426,the saturation of hydrogen increases by 26.2%.Narrower pore throats elevate capillary resistance,which hinders fluid invasion.These results underscore the importance of pore structures and the interaction between viscous and capillary forces for hydrogen recovery efficiency.This work illuminates the influence of the pore structures and the fluid properties on the immiscible displacement of hydrogen and can be further extended to optimize the injection strategy of hydrogen in underground hydrogen storage.
基金Supported by the National Natural Science Foundation of China(Grant Nos.52305186,52275177)the Research Start-up Funding of Fuzhou University(Grant Nos.XRC-23015,XRC-23064).
文摘Micron-sized graphene sheets have been introduced as additives to enhance the lubricating capabilities of water.The tribological characteristics of the lubricants after preparation and storage for 6 months were systematically analyzed.Results indicated that the friction coefficient and wear volume of the tribo-pair were reduced through the incorporation of a certain concentration of graphene sheets,and also have long-term storage stability.Notably,under the experimental conditions,a 0.2%mass concentration of graphene in the aqueous lubricant exhibited exceptional tribological performance and long-term storage stability,achieving an 80%reduction in friction coefficient and a 78%decrease in wear volume with a 14000-cycle friction test.Wear morphology analysis indicated that after adding graphene sheets to the aqueous solution,micro-plastic deformation occurs on the worn surface of the steel plate.The wear profile of the GCr15 counter ball changes from a circular profile to a rectangular-like profile.The main reason is that the graphene sheets in the aqueous solution can enter the contact interface during the friction process,hindering direct contact between the friction pair.The study prov-ides a simple method to improve the tribological properties of aqueous solutions stably for engineering applica-tions.
基金funded by the National Key Research and Development Program of China(2022YFB3807105)National Natural Science Foundation of China(52090033)+3 种基金State Key Laboratory for Modification of Chemical Fibers and Polymer Materials(KF222318)Jiangsu Province Industry-University-Research Cooperation Project(BY2022799)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX243534KYCX243521)。
文摘Photo-assisted flexible energy storage devices,combining photoelectric conversion and electrochemical energy storage,emerge as an innovative solution for sustainable energy systems.This review comprehensively summarizes recent advances in photo-assisted flexible energy storage technology,covering material design,working mechanisms,and practical applications.We systematically examine diverse electrode materials,such as metal oxides,metal sulfides,organic photosensitive materials,and composites,emphasizing their roles in boosting device performance.Special focus is placed on emerging technologies—including heterostructure engineering,surface modification,and intelligent control systems—that have notably enhanced energy conversion efficiency and storage capacity.The review also discusses current challenges,such as material stability,conversion efficiency,and standardization,and proposes strategic directions for future development.Recent breakthroughs in photo-assisted supercapacitors,lithium-based batteries,zinc-based batteries,and other innovative storage systems are critically assessed,offering key insights into their practical application potential in wearable electronics,self-powered sensors,and beyond.This comprehensive analysis establishes a framework for understanding the current status of photo-assisted flexible energy storage technology and guides future research toward high-performance,sustainable energy storage solutions.
基金supported by the National Key R&D Program of China(2022YFB3803700)National Natural Science Foundation of China(52171186)+1 种基金Young Elite Scientists Sponsorship Program by CAST(2023QNRC001)support from“Zhiyuan Honor Program”for doctoral students,Shanghai Jiao Tong University.
文摘Nanoconfinement is a promising approach to simultaneously enhance the thermodynamics,kinetics,and cycling stability of hydrogen storage materials.The introduction of supporting scaffolds usually causes a reduction in the total hydrogen storage capacity due to“dead weight.”Here,we synthesize an optimized N-doped porous carbon(rN-pC)without heavy metal as supporting scaffold to confine Mg/MgH_(2) nanoparticles(Mg/MgH_(2)@rN-pC).rN-pC with 60 wt%loading capacity of Mg(denoted as 60 Mg@rN-pC)can adsorb and desorb 0.62 wt%H_(2) on the rN-pC scaffold.The nanoconfined MgH_(2) can be chemically dehydrided at 175℃,providing~3.59 wt%H_(2) with fast kinetics(fully dehydrogenated at 300℃ within 15 min).This study presents the first realization of nanoconfined Mg-based system with adsorption-active scaffolds.Besides,the nanoconfined MgH_(2) formation enthalpy is reduced to~68 kJ mol^(−1) H_(2) from~75 kJ mol^(−1) H_(2) for pure MgH_(2).The composite can be also compressed to nanostructured pellets,with volumetric H_(2) density reaching 33.4 g L^(−1) after 500 MPa compression pressure,which surpasses the 24 g L^(−1) volumetric capacity of 350 bar compressed H_(2).Our approach can be implemented to the design of hybrid H_(2) storage materials with enhanced capacity and desorption rate.
