Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the ...Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.展开更多
On 16 January 2025,flames erupted,and smoke rose more than 300 m in Moss Landing,CA,USA,at what was until early 2024 the world’s largest battery energy storage system(BESS)[1].Prompted by the potential danger of expo...On 16 January 2025,flames erupted,and smoke rose more than 300 m in Moss Landing,CA,USA,at what was until early 2024 the world’s largest battery energy storage system(BESS)[1].Prompted by the potential danger of exposure to toxic gases from the blaze[2],local authorities closed schools and the coast’s iconic Highway 1,evacuated hundreds living close to the facility,and instructed residents of the nearby communities of Santa Cruz and Salinas to stay indoors and keep their doors and windows shut.The burning lithium-ion batteries(LIB)also raised concerns about contamina-tion of communities and farmland in the area.展开更多
This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure o...This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.展开更多
There is instability in the distributed energy storage cloud group end region on the power grid side.In order to avoid large-scale fluctuating charging and discharging in the power grid environment and make the capaci...There is instability in the distributed energy storage cloud group end region on the power grid side.In order to avoid large-scale fluctuating charging and discharging in the power grid environment and make the capacitor components showa continuous and stable charging and discharging state,a hierarchical time-sharing configuration algorithm of distributed energy storage cloud group end region on the power grid side based on multi-scale and multi feature convolution neural network is proposed.Firstly,a voltage stability analysis model based onmulti-scale and multi feature convolution neural network is constructed,and the multi-scale and multi feature convolution neural network is optimized based on Self-OrganizingMaps(SOM)algorithm to analyze the voltage stability of the cloud group end region of distributed energy storage on the grid side under the framework of credibility.According to the optimal scheduling objectives and network size,the distributed robust optimal configuration control model is solved under the framework of coordinated optimal scheduling at multiple time scales;Finally,the time series characteristics of regional power grid load and distributed generation are analyzed.According to the regional hierarchical time-sharing configuration model of“cloud”,“group”and“end”layer,the grid side distributed energy storage cloud group end regional hierarchical time-sharing configuration algorithm is realized.The experimental results show that after applying this algorithm,the best grid side distributed energy storage configuration scheme can be determined,and the stability of grid side distributed energy storage cloud group end region layered timesharing configuration can be improved.展开更多
As there is datum redundancy in tradition database and temporal database in existence and the quantities of temporal database are increasing fleetly.We put forward compress storage tactics for temporal datum which com...As there is datum redundancy in tradition database and temporal database in existence and the quantities of temporal database are increasing fleetly.We put forward compress storage tactics for temporal datum which combine compress technology in existence in order to settle datum redundancy in the course of temporal datum storage and temporal datum of slow acting domain and momentary acting domain are accessed by using each from independence clock method and mutual clock method.We also bring forward strategy of gridding storage to resolve the problems of temporal datum rising rapidly.展开更多
Lithium nickel oxide(Li_(2)NiO_(2)),as a sacrificial cathode prelithiation additive,has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries(LIBs).However,high-cost Li_(2)Ni...Lithium nickel oxide(Li_(2)NiO_(2)),as a sacrificial cathode prelithiation additive,has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries(LIBs).However,high-cost Li_(2)NiO_(2)suffers from inferior delithiation kinetics during the first cycle.Herein,we investigated the effects of the cost-effective copper substituted Li_(2)Ni_(1-x)Cu_(x)O_(2)(x=0,0.2,0.3,0.5,0.7)synthesized by a high-temperature solid-phase method on the structure,morphology,electrochemical performance of graphite‖LiFePO_(4)battery.The X-ray diffraction(XRD)refinement result demonstrated that Cu substitution strategy could be favorable for eliminating the NiO_(x)impurity phase and weakening Li-O bond.Analysis on density of states(DOS)indicates that Cu substitution is good for enhancing the electronic conductivity,as well as reducing the delithi-ation voltage polarization confirmed by electrochemical characterizations.Therefore,the optimal Li_(2)Ni_(0.7)Cu_(0.3)O_(2)delivered a high delithiation capacity of 437 mAh·g^(-1),around 8%above that of the pristine Li_(2)NiO_(2).Furthermore,a graphite‖LiFePO_(4)pouch cell with a nominal capacity of 3000 mAh demonstrated a notably improved reversible capacity,energy density and cycle life through introducing 2 wt%Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive,delivering a 6.2 mAh·g^(-1)higher initial discharge capacity and achieving around 5%improvement in capacity retentnion at 0.5P over 1000 cycles.Additionally,the post-mortem analyses testified that the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive could suppress solid electrolyte interphase(SEI)decomposition and homogenize the Li distribution,which benefits to stabilizing interface between graphite and electrolyte,and alleviating dendritic Li plating.In conclusion,the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive may offer advantages such as lower cost,lower delithiation voltage and higher prelithiation capacity compared with Li_(2)NiO_(2),making it a promising candidate of cathode prelithiation additive for next-generation LIBs.展开更多
The energy crisis and environmental pollution drive more attention to the development and utilization of renewable energy.Considering the capricious nature of renewable energy resource,it has difficulty supplying elec...The energy crisis and environmental pollution drive more attention to the development and utilization of renewable energy.Considering the capricious nature of renewable energy resource,it has difficulty supplying electricity directly to consumers stably and efficiently,which calls for energy storage systems to collect energy and release electricity at peak periods.Due to their flexible power and energy,quick response,and high energy conversion efficiency,lithium-ion batteries stand out among multiple energy storage technologies and are rapidly deployed in the grid.Pursuing superior performance and ensuring the safety of energy storage systems,intrinsically safe solid-state electrolytes are expected as an ideal alternative to liquid electrolytes.In this review,we systematically evaluate the priorities and issues of traditional lithium-ion batteries in grid energy storage.Beyond lithium-ion batteries containing liquid electrolytes,solid-state lithium-ion batteries have the potential to play a more significant role in grid energy storage.The challenges of developing solid-state lithium-ion batteries,such as low ionic conductivity of the electrolyte,unstable electrode/electrolyte interface,and complicated fabrication process,are discussed in detail.Additionally,the safety of solid-state lithium-ion batteries is re-examined.Following the obtained insights,inspiring prospects for solid-state lithium-ion batteries in grid energy storage are depicted.展开更多
Besides grid-to-vehicle(G2 V) and vehicle-to-grid(V2 G) functions, the battery of an electric vehicle(EV) also has the specific feature of mobility. This means that EVs not only have the potential to utilize the stora...Besides grid-to-vehicle(G2 V) and vehicle-to-grid(V2 G) functions, the battery of an electric vehicle(EV) also has the specific feature of mobility. This means that EVs not only have the potential to utilize the storage of cheap electricity for use in high energy price periods, but can also transfer energy from one place to another place. Based on these special features of an EV battery, a new EV energy scheduling method has been developed and is described in this article. The approach is aimed at optimizing the utilization EV energy for EVs that are regularly used in multiple places. The objective is to minimize electricity costs from multiple meter points. This work applies real data in order to analyze the effectiveness of the method. The results show that by applying the control strategy presented in this paper at locations where the EVs are parked, the electricity cost can be reduced without shifting the demand and lowering customer's satisfaction. The effects of PV size and number of EVs on our model are also analyzed in this paper. This model has the potential to be used by energy system designers as a new perspective to determine optimal sizes of generators or storage devices in energy systems.展开更多
Aqueous redox flow batteries,by using redox-active molecules dissolved in nonflammable water solutions as electrolytes,are a promising technology for grid-scale energy storage.Organic redox-active materials offer a ne...Aqueous redox flow batteries,by using redox-active molecules dissolved in nonflammable water solutions as electrolytes,are a promising technology for grid-scale energy storage.Organic redox-active materials offer a new opportunity for the construction of advanced flow batteries due to their advantages of potentially low cost,extensive structural diversity,tunable electrochemical properties,and high natural abundance.In this review,we present the emergence and development of organic redox-active materials for aqueous organic redox flow batteries(AORFBs),in particular,molecular engineering concepts and strategies of organic redox-active molecules.The typical design strategies based on organic redox species for high-capacity,high-stability,and high-voltage AORFBs are outlined and discussed.Molecular engineering of organic redox-active molecules for high aqueous solubility,high chemical/electrochemical stability,and multiple electron numbers as well as satisfactory redox potential gap between the redox pair is essential to realizing high-performance AORFBs.Beyond molecular engineering,the redoxtargeting strategy is an effective way to obtain high-capacity AORFBs.We further discuss and analyze the redox reaction mechanisms of organic redox species based on a series of electrochemical and spectroscopic approaches,and succinctly summarize the capacity degradation mechanisms of AORFBs.Furthermore,the current challenges,opportunities,and future directions of organic redox-active materials for AORFBs are presented in detail.展开更多
Sodium(Na)-ion batteries offer a sustainable,lithium-free route for grid-scale storage;yet the intrinsically disordered structure of hard carbon(HC)anodes obscures the structure-performance relationship and limits the...Sodium(Na)-ion batteries offer a sustainable,lithium-free route for grid-scale storage;yet the intrinsically disordered structure of hard carbon(HC)anodes obscures the structure-performance relationship and limits their electrochemical performance[1,2].While remarkable progress has been achieved in cathode chemistries,particularly layered transition-metal oxides that deliver high capacities and elevated operating voltages[3],the absence of a high-performance HC anode remains a key bottleneck[4,5],resulting in unguided pore engineering and inefficient Na utilization[6].展开更多
文摘Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.
文摘On 16 January 2025,flames erupted,and smoke rose more than 300 m in Moss Landing,CA,USA,at what was until early 2024 the world’s largest battery energy storage system(BESS)[1].Prompted by the potential danger of exposure to toxic gases from the blaze[2],local authorities closed schools and the coast’s iconic Highway 1,evacuated hundreds living close to the facility,and instructed residents of the nearby communities of Santa Cruz and Salinas to stay indoors and keep their doors and windows shut.The burning lithium-ion batteries(LIB)also raised concerns about contamina-tion of communities and farmland in the area.
基金supported by the State Grid Science and Technology Project (No.52999821N004)。
文摘This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.
基金supported by State Grid Corporation Limited Science and Technology Project Funding(Contract No.SGCQSQ00YJJS2200380).
文摘There is instability in the distributed energy storage cloud group end region on the power grid side.In order to avoid large-scale fluctuating charging and discharging in the power grid environment and make the capacitor components showa continuous and stable charging and discharging state,a hierarchical time-sharing configuration algorithm of distributed energy storage cloud group end region on the power grid side based on multi-scale and multi feature convolution neural network is proposed.Firstly,a voltage stability analysis model based onmulti-scale and multi feature convolution neural network is constructed,and the multi-scale and multi feature convolution neural network is optimized based on Self-OrganizingMaps(SOM)algorithm to analyze the voltage stability of the cloud group end region of distributed energy storage on the grid side under the framework of credibility.According to the optimal scheduling objectives and network size,the distributed robust optimal configuration control model is solved under the framework of coordinated optimal scheduling at multiple time scales;Finally,the time series characteristics of regional power grid load and distributed generation are analyzed.According to the regional hierarchical time-sharing configuration model of“cloud”,“group”and“end”layer,the grid side distributed energy storage cloud group end regional hierarchical time-sharing configuration algorithm is realized.The experimental results show that after applying this algorithm,the best grid side distributed energy storage configuration scheme can be determined,and the stability of grid side distributed energy storage cloud group end region layered timesharing configuration can be improved.
文摘As there is datum redundancy in tradition database and temporal database in existence and the quantities of temporal database are increasing fleetly.We put forward compress storage tactics for temporal datum which combine compress technology in existence in order to settle datum redundancy in the course of temporal datum storage and temporal datum of slow acting domain and momentary acting domain are accessed by using each from independence clock method and mutual clock method.We also bring forward strategy of gridding storage to resolve the problems of temporal datum rising rapidly.
基金supported by the Significant Science and Technology Project in Xiamen(Future Industry Field)(Grant No.3502Z20231057).
文摘Lithium nickel oxide(Li_(2)NiO_(2)),as a sacrificial cathode prelithiation additive,has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries(LIBs).However,high-cost Li_(2)NiO_(2)suffers from inferior delithiation kinetics during the first cycle.Herein,we investigated the effects of the cost-effective copper substituted Li_(2)Ni_(1-x)Cu_(x)O_(2)(x=0,0.2,0.3,0.5,0.7)synthesized by a high-temperature solid-phase method on the structure,morphology,electrochemical performance of graphite‖LiFePO_(4)battery.The X-ray diffraction(XRD)refinement result demonstrated that Cu substitution strategy could be favorable for eliminating the NiO_(x)impurity phase and weakening Li-O bond.Analysis on density of states(DOS)indicates that Cu substitution is good for enhancing the electronic conductivity,as well as reducing the delithi-ation voltage polarization confirmed by electrochemical characterizations.Therefore,the optimal Li_(2)Ni_(0.7)Cu_(0.3)O_(2)delivered a high delithiation capacity of 437 mAh·g^(-1),around 8%above that of the pristine Li_(2)NiO_(2).Furthermore,a graphite‖LiFePO_(4)pouch cell with a nominal capacity of 3000 mAh demonstrated a notably improved reversible capacity,energy density and cycle life through introducing 2 wt%Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive,delivering a 6.2 mAh·g^(-1)higher initial discharge capacity and achieving around 5%improvement in capacity retentnion at 0.5P over 1000 cycles.Additionally,the post-mortem analyses testified that the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive could suppress solid electrolyte interphase(SEI)decomposition and homogenize the Li distribution,which benefits to stabilizing interface between graphite and electrolyte,and alleviating dendritic Li plating.In conclusion,the Li_(2)Ni_(0.7)Cu_(0.3)O_(2)additive may offer advantages such as lower cost,lower delithiation voltage and higher prelithiation capacity compared with Li_(2)NiO_(2),making it a promising candidate of cathode prelithiation additive for next-generation LIBs.
基金supported by the National Key R&D Program of China(2021YFB2400200)the CAS Project for Young Scientists in Basic Research(YSBR-058)+4 种基金the“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences(XDA21070300)the National Natural Science Foundation of China(22279148,21905286 and 22005314)the China Postdoctoral Science Foundation(2019M660805)the Special Financial Grant from the China Postdoctoral Science Foundation(2020T130658)Beijing National Laboratory for Molecular Sciences(2019BMS20022)。
文摘The energy crisis and environmental pollution drive more attention to the development and utilization of renewable energy.Considering the capricious nature of renewable energy resource,it has difficulty supplying electricity directly to consumers stably and efficiently,which calls for energy storage systems to collect energy and release electricity at peak periods.Due to their flexible power and energy,quick response,and high energy conversion efficiency,lithium-ion batteries stand out among multiple energy storage technologies and are rapidly deployed in the grid.Pursuing superior performance and ensuring the safety of energy storage systems,intrinsically safe solid-state electrolytes are expected as an ideal alternative to liquid electrolytes.In this review,we systematically evaluate the priorities and issues of traditional lithium-ion batteries in grid energy storage.Beyond lithium-ion batteries containing liquid electrolytes,solid-state lithium-ion batteries have the potential to play a more significant role in grid energy storage.The challenges of developing solid-state lithium-ion batteries,such as low ionic conductivity of the electrolyte,unstable electrode/electrolyte interface,and complicated fabrication process,are discussed in detail.Additionally,the safety of solid-state lithium-ion batteries is re-examined.Following the obtained insights,inspiring prospects for solid-state lithium-ion batteries in grid energy storage are depicted.
基金supported by the China Scholarship Council and Donghua University Graduate Student Degree Thesis Innovation Fund Project (Grant No. CUSF-DH-D-2013059)
文摘Besides grid-to-vehicle(G2 V) and vehicle-to-grid(V2 G) functions, the battery of an electric vehicle(EV) also has the specific feature of mobility. This means that EVs not only have the potential to utilize the storage of cheap electricity for use in high energy price periods, but can also transfer energy from one place to another place. Based on these special features of an EV battery, a new EV energy scheduling method has been developed and is described in this article. The approach is aimed at optimizing the utilization EV energy for EVs that are regularly used in multiple places. The objective is to minimize electricity costs from multiple meter points. This work applies real data in order to analyze the effectiveness of the method. The results show that by applying the control strategy presented in this paper at locations where the EVs are parked, the electricity cost can be reduced without shifting the demand and lowering customer's satisfaction. The effects of PV size and number of EVs on our model are also analyzed in this paper. This model has the potential to be used by energy system designers as a new perspective to determine optimal sizes of generators or storage devices in energy systems.
基金Scientific and Technological Innovation Special Fund for Carbon Peak and Carbon Neutrality of Jiangsu Province,Grant/Award Number:BK20220008Suzhou Gusu Leading Talent Program of Science and Technology Innovation and Entrepreneurship in Wujiang District,Grant/Award Number:ZXL2021273+5 种基金Central University Basic Research Fund of China,Grant/Award Numbers:020514380266,020514380272,020514380274Natural Science Foundation of Jiangsu Province,Grant/Award Number:BK20200306Research Grants Council of the Hong Kong Special Administrative Region,China,Grant/Award Number:T23‐601/17‐RNational Natural Science Foundation of China,Grant/Award Numbers:21872069,22022505Nanjing International Collaboration Research Program,Grant/Award Numbers:202201007,2022SX00000955National Key R&D Program of China,Grant/Award Number:2017YFA0208200。
文摘Aqueous redox flow batteries,by using redox-active molecules dissolved in nonflammable water solutions as electrolytes,are a promising technology for grid-scale energy storage.Organic redox-active materials offer a new opportunity for the construction of advanced flow batteries due to their advantages of potentially low cost,extensive structural diversity,tunable electrochemical properties,and high natural abundance.In this review,we present the emergence and development of organic redox-active materials for aqueous organic redox flow batteries(AORFBs),in particular,molecular engineering concepts and strategies of organic redox-active molecules.The typical design strategies based on organic redox species for high-capacity,high-stability,and high-voltage AORFBs are outlined and discussed.Molecular engineering of organic redox-active molecules for high aqueous solubility,high chemical/electrochemical stability,and multiple electron numbers as well as satisfactory redox potential gap between the redox pair is essential to realizing high-performance AORFBs.Beyond molecular engineering,the redoxtargeting strategy is an effective way to obtain high-capacity AORFBs.We further discuss and analyze the redox reaction mechanisms of organic redox species based on a series of electrochemical and spectroscopic approaches,and succinctly summarize the capacity degradation mechanisms of AORFBs.Furthermore,the current challenges,opportunities,and future directions of organic redox-active materials for AORFBs are presented in detail.
基金supported by the National Natural Science Foundation of China(22575145)the Scientific Research Innovation Capability Support Project for Young Faculty(SRICSPYF-ZY2025049)+2 种基金the Fundamental Research Funds for the Central Universities(25X010202131)the Autonomous Project of State Key Laboratory of Synergistic Chem-Bio Synthesis(sklscbs202557)the LUI Che Woo Talent Development Fund(LCW-ZIAS-2026B05).
文摘Sodium(Na)-ion batteries offer a sustainable,lithium-free route for grid-scale storage;yet the intrinsically disordered structure of hard carbon(HC)anodes obscures the structure-performance relationship and limits their electrochemical performance[1,2].While remarkable progress has been achieved in cathode chemistries,particularly layered transition-metal oxides that deliver high capacities and elevated operating voltages[3],the absence of a high-performance HC anode remains a key bottleneck[4,5],resulting in unguided pore engineering and inefficient Na utilization[6].
