The geometric accuracy of topographic mapping with high-resolution remote sensing images is inevita-bly affected by the orbiter attitude jitter.Therefore,it is necessary to conduct preliminary research on the stereo m...The geometric accuracy of topographic mapping with high-resolution remote sensing images is inevita-bly affected by the orbiter attitude jitter.Therefore,it is necessary to conduct preliminary research on the stereo mapping camera equipped on lunar orbiter before launching.In this work,an imaging simulation method consid-ering the attitude jitter is presented.The impact analysis of different attitude jitter on terrain undulation is conduct-ed by simulating jitter at three attitude angles,respectively.The proposed simulation method is based on the rigor-ous sensor model,using the lunar digital elevation model(DEM)and orthoimage as reference data.The orbit and attitude of the lunar stereo mapping camera are simulated while considering the attitude jitter.Two-dimensional simulated stereo images are generated according to the position and attitude of the orbiter in a given orbit.Experi-mental analyses were conducted by the DEM with the simulated stereo image.The simulation imaging results demonstrate that the proposed method can ensure imaging efficiency without losing the accuracy of topographic mapping.The effect of attitude jitter on the stereo mapping accuracy of the simulated images was analyzed through a DEM comparison.展开更多
The goals of engineering and scientific missions for Chang＇E-2 lunar satellite require high detection sensitivity and large imaging dynamic range for the onboard CCD cameras. The TDI CCD image sensor was adopted for ...The goals of engineering and scientific missions for Chang＇E-2 lunar satellite require high detection sensitivity and large imaging dynamic range for the onboard CCD cameras. The TDI CCD image sensor was adopted for the two linear CCD stereo cameras for the first time in the lunar reconnaissance of the world. The design argumentation is described in this paper. The analysis shows that the imagers meet the mission requirements. The satellite was launched on 1 October 2010 at zero window. The cameras obtained images of 7 m resolution on the 100 km orbit for the first time on 24 October 2010, and operated once again on 27 October 2010 to take stereo images of the Sinus Iridum with the resolution better than 1.5 m. On the near-moon-arc of 15 kmxl00 km elliptical orbit, the images are very clear and rich of grey scales, indicating successful completion of the Chang＇E-2 engineering mission. At the present the cameras are acquiring the full lunar surface stereo images with 7 m resolution on the 100 km circular orbit to complete their scientific mission.展开更多
The TDI-CCD imaging method using auto-compensation of velocity-height ratio (VHR) was applied to Chang’E-2 satellite CCD stereo camera.Factors that influence the image quality of the camera were discussed,among which...The TDI-CCD imaging method using auto-compensation of velocity-height ratio (VHR) was applied to Chang’E-2 satellite CCD stereo camera.Factors that influence the image quality of the camera were discussed,among which the mismatch error in VHR was found to be the main cause.An auto-compensation scheme for VHR was developed.The validity and effectiveness were proved by the on-orbit high quality images.展开更多
This paper describes target detection improvement in a distance measurement system using two rotatable cameras for floating production, storage and offloading （FPSO） facilities. The authors have developed a distance...This paper describes target detection improvement in a distance measurement system using two rotatable cameras for floating production, storage and offloading （FPSO） facilities. The authors have developed a distance measurement system that consists of two rotatable cameras on a ship and a target on a wharf for the automatic berthing of ships. This system measures a distance by detecting and tracking the target on the wharf using the two rotatable cameras on the ship. Our goal is to apply this distance measurement system to an automatic relative positioning system for a ship at an FPSO facility. In this application, the shape of the target in the images captured by the cameras is deformed by their relative positions and attitudes, which increases the measurement errors. To solve this problem, we propose a target detection method that improves the target deformations. The proposed target detection method is able to detect the deformed targets using a target database that is created by image conversion with the perspective projection of a reference target. By using the proposed target detection method, the distance measurement error is decreased. Experimental results on a miniature scale and in an indoor environment confirmed that the measurement error of the relative distance is decreased by using the proposed target detection method.展开更多
Aiming at the low speed of traditional scale-invariant feature transform(SIFT) matching algorithm, an improved matching algorithm is proposed in this paper. Firstly, feature points are detected and the speed of featur...Aiming at the low speed of traditional scale-invariant feature transform(SIFT) matching algorithm, an improved matching algorithm is proposed in this paper. Firstly, feature points are detected and the speed of feature points matching is improved by adding epipolar constraint; then according to the matching feature points, the homography matrix is obtained by the least square method; finally, according to the homography matrix, the points in the left image can be mapped into the right image, and if the distance between the mapping point and the matching point in the right image is smaller than the threshold value, the pair of matching points is retained, otherwise discarded. Experimental results show that with the improved matching algorithm, the matching time is reduced by 73.3% and the matching points are entirely correct. In addition, the improved method is robust to rotation and translation.展开更多
Accurate stereo vision calibration is a preliminary step towards high-precision visual posi- tioning of robot. Combining with the characteristics of genetic algorithm （GA） and particle swarm optimization （PSO）, a ...Accurate stereo vision calibration is a preliminary step towards high-precision visual posi- tioning of robot. Combining with the characteristics of genetic algorithm （GA） and particle swarm optimization （PSO）, a three-stage calibration method based on hybrid intelligent optimization is pro- posed for nonlinear camera models in this paper. The motivation is to improve the accuracy of the calibration process. In this approach, the stereo vision calibration is considered as an optimization problem that can be solved by the GA and PSO. The initial linear values can be obtained in the frost stage. Then in the second stage, two cameras＇ parameters are optimized separately. Finally, the in- tegrated optimized calibration of two models is obtained in the third stage. Direct linear transforma- tion （DLT）, GA and PSO are individually used in three stages. It is shown that the results of every stage can correctly find near-optimal solution and it can be used to initialize the next stage. Simula- tion analysis and actual experimental results indicate that this calibration method works more accu- rate and robust in noisy environment compared with traditional calibration methods. The proposed method can fulfill the requirements of robot sophisticated visual operation.展开更多
In order to quickly and efficiently get the information of the bottom of the shoe pattern and spraying trajectory, the paper proposes a method based on binocular stereo vision. After acquiring target image, edge detec...In order to quickly and efficiently get the information of the bottom of the shoe pattern and spraying trajectory, the paper proposes a method based on binocular stereo vision. After acquiring target image, edge detection based on the canny algorithm, the paper begins stereo matching based on area and characteristics of algorithm. To eliminate false matching points, the paper uses the principle of polar geometry in computer vision. For the purpose of gaining the 3D point cloud of spraying curve, the paper adopts the principle of binocular stereo vision 3D measurement, and then carries on cubic spline curve fitting. By HALCON image processing software programming, it proves the feasibility and effectiveness of the method展开更多
基金Supported by the National Natural Science Foundation of China(42221002,42171432)Shanghai Municipal Science and Technology Major Project(2021SHZDZX0100)the Fundamental Research Funds for the Central Universities.
文摘The geometric accuracy of topographic mapping with high-resolution remote sensing images is inevita-bly affected by the orbiter attitude jitter.Therefore,it is necessary to conduct preliminary research on the stereo mapping camera equipped on lunar orbiter before launching.In this work,an imaging simulation method consid-ering the attitude jitter is presented.The impact analysis of different attitude jitter on terrain undulation is conduct-ed by simulating jitter at three attitude angles,respectively.The proposed simulation method is based on the rigor-ous sensor model,using the lunar digital elevation model(DEM)and orthoimage as reference data.The orbit and attitude of the lunar stereo mapping camera are simulated while considering the attitude jitter.Two-dimensional simulated stereo images are generated according to the position and attitude of the orbiter in a given orbit.Experi-mental analyses were conducted by the DEM with the simulated stereo image.The simulation imaging results demonstrate that the proposed method can ensure imaging efficiency without losing the accuracy of topographic mapping.The effect of attitude jitter on the stereo mapping accuracy of the simulated images was analyzed through a DEM comparison.
文摘The goals of engineering and scientific missions for Chang＇E-2 lunar satellite require high detection sensitivity and large imaging dynamic range for the onboard CCD cameras. The TDI CCD image sensor was adopted for the two linear CCD stereo cameras for the first time in the lunar reconnaissance of the world. The design argumentation is described in this paper. The analysis shows that the imagers meet the mission requirements. The satellite was launched on 1 October 2010 at zero window. The cameras obtained images of 7 m resolution on the 100 km orbit for the first time on 24 October 2010, and operated once again on 27 October 2010 to take stereo images of the Sinus Iridum with the resolution better than 1.5 m. On the near-moon-arc of 15 kmxl00 km elliptical orbit, the images are very clear and rich of grey scales, indicating successful completion of the Chang＇E-2 engineering mission. At the present the cameras are acquiring the full lunar surface stereo images with 7 m resolution on the 100 km circular orbit to complete their scientific mission.
基金supported by the Chang’E Lunar Exploration Project of Chinathe National Hi-Tech Research and Development Program of China ("863" Project) (Grant No. 2010AA122200)the National Basic Research Program of China ("973" Project) (Grant No. 2009CB724005)
文摘The TDI-CCD imaging method using auto-compensation of velocity-height ratio (VHR) was applied to Chang’E-2 satellite CCD stereo camera.Factors that influence the image quality of the camera were discussed,among which the mismatch error in VHR was found to be the main cause.An auto-compensation scheme for VHR was developed.The validity and effectiveness were proved by the on-orbit high quality images.
文摘This paper describes target detection improvement in a distance measurement system using two rotatable cameras for floating production, storage and offloading （FPSO） facilities. The authors have developed a distance measurement system that consists of two rotatable cameras on a ship and a target on a wharf for the automatic berthing of ships. This system measures a distance by detecting and tracking the target on the wharf using the two rotatable cameras on the ship. Our goal is to apply this distance measurement system to an automatic relative positioning system for a ship at an FPSO facility. In this application, the shape of the target in the images captured by the cameras is deformed by their relative positions and attitudes, which increases the measurement errors. To solve this problem, we propose a target detection method that improves the target deformations. The proposed target detection method is able to detect the deformed targets using a target database that is created by image conversion with the perspective projection of a reference target. By using the proposed target detection method, the distance measurement error is decreased. Experimental results on a miniature scale and in an indoor environment confirmed that the measurement error of the relative distance is decreased by using the proposed target detection method.
基金supported by the National Natural Science Foundation of China(Nos.60808020 and 61078041)the National Science and Technology Support(No.2014BAH03F01)+1 种基金the Tianjin Research Program of Application Foundation and Advanced Technology(No.10JCYBJC07200)the Technology Program of Tianjin Municipal Education Commission(No.20130324)
文摘Aiming at the low speed of traditional scale-invariant feature transform(SIFT) matching algorithm, an improved matching algorithm is proposed in this paper. Firstly, feature points are detected and the speed of feature points matching is improved by adding epipolar constraint; then according to the matching feature points, the homography matrix is obtained by the least square method; finally, according to the homography matrix, the points in the left image can be mapped into the right image, and if the distance between the mapping point and the matching point in the right image is smaller than the threshold value, the pair of matching points is retained, otherwise discarded. Experimental results show that with the improved matching algorithm, the matching time is reduced by 73.3% and the matching points are entirely correct. In addition, the improved method is robust to rotation and translation.
文摘Accurate stereo vision calibration is a preliminary step towards high-precision visual posi- tioning of robot. Combining with the characteristics of genetic algorithm （GA） and particle swarm optimization （PSO）, a three-stage calibration method based on hybrid intelligent optimization is pro- posed for nonlinear camera models in this paper. The motivation is to improve the accuracy of the calibration process. In this approach, the stereo vision calibration is considered as an optimization problem that can be solved by the GA and PSO. The initial linear values can be obtained in the frost stage. Then in the second stage, two cameras＇ parameters are optimized separately. Finally, the in- tegrated optimized calibration of two models is obtained in the third stage. Direct linear transforma- tion （DLT）, GA and PSO are individually used in three stages. It is shown that the results of every stage can correctly find near-optimal solution and it can be used to initialize the next stage. Simula- tion analysis and actual experimental results indicate that this calibration method works more accu- rate and robust in noisy environment compared with traditional calibration methods. The proposed method can fulfill the requirements of robot sophisticated visual operation.
文摘In order to quickly and efficiently get the information of the bottom of the shoe pattern and spraying trajectory, the paper proposes a method based on binocular stereo vision. After acquiring target image, edge detection based on the canny algorithm, the paper begins stereo matching based on area and characteristics of algorithm. To eliminate false matching points, the paper uses the principle of polar geometry in computer vision. For the purpose of gaining the 3D point cloud of spraying curve, the paper adopts the principle of binocular stereo vision 3D measurement, and then carries on cubic spline curve fitting. By HALCON image processing software programming, it proves the feasibility and effectiveness of the method
