An improved finite difference method （FDM）is described to solve existing problems such as low efficiency and poor convergence performance in the traditional method adopted to derive the pressure distribution of aero...An improved finite difference method （FDM）is described to solve existing problems such as low efficiency and poor convergence performance in the traditional method adopted to derive the pressure distribution of aerostatic bearings. A detailed theoretical analysis of the pressure distribution of the orifice-compensated aerostatic journal bearing is presented. The nonlinear dimensionless Reynolds equation of the aerostatic journal bearing is solved by the finite difference method. Based on the principle of flow equilibrium, a new iterative algorithm named the variable step size successive approximation method is presented to adjust the pressure at the orifice in the iterative process and enhance the efficiency and convergence performance of the algorithm. A general program is developed to analyze the pressure distribution of the aerostatic journal bearing by Matlab tool. The results show that the improved finite difference method is highly effective, reliable, stable, and convergent. Even when very thin gas film thicknesses （less than 2 Win）are considered, the improved calculation method still yields a result and converges fast.展开更多
Vanadium nitrides were prepared via one step method of carbothermal reduction and nitridation of vanadium trioxide. Thermalgravimetric analysis （TGA） and X-ray diffraction were used to determine the reaction paths o...Vanadium nitrides were prepared via one step method of carbothermal reduction and nitridation of vanadium trioxide. Thermalgravimetric analysis （TGA） and X-ray diffraction were used to determine the reaction paths of vanadium carbide, namely the following sequential reaction： V2O3→V8C7 in higher temperature stage, the rule of vanadium nitride synthesized was established, and defined conditions of temperature for the production of the carbides and nitrides were determined. Vanadium oxycarbide may consist in the front process of carbothermal reduction of vanadium trioxide. In one step method for vanadium nitride by carbothermal reduction and nitridation of vanadium trioxide, the nitridation process is simultaneous with the carbothermal reduction. A one-step mechanism of the carbothermal reduction with simultaneous nitridation leaded to a lower terminal temperature in nitridation process for vanadium nitride produced, compared with that of carbothermal reduction process without nitridation. The grain size and shape of vanadium nitride were uniform, and had the shape of a cube. The one step method combined vacuum carborization and nitridation （namely two step method） into one process. It simplified the technological process and decreased the costs.展开更多
The precise time step integration method proposed for linear time-invariant homogeneous dynamic systems can provide precise numerical results that approach an exact solution at the integration points. However, difficu...The precise time step integration method proposed for linear time-invariant homogeneous dynamic systems can provide precise numerical results that approach an exact solution at the integration points. However, difficulty arises when the algorithm is used for non-homogeneous dynamic systems, due to the inverse matrix calculation and the simulation accuracy of the applied loading. By combining the Gaussian quadrature method and state space theory with the calculation technique of matrix exponential function in the precise time step integration method, a new modified precise time step integration method （e.g., an algorithm with an arbitrary order of accuracy） is proposed. In the new method, no inverse matrix calculation or simulation of the applied loading is needed, and the computing efficiency is improved. In particular, the proposed method is independent of the quality of the matrix H. If the matrix H is singular or nearly singular, the advantage of the method is remarkable. The numerical stability of the proposed algorithm is discussed and a numerical example is given to demonstrate the validity and efficiency of the algorithm.展开更多
In this work it presents a strategy to obtain the ozone solubility in water by gradient step method. In this methodology, the ozone in mixture with oxygen is bubbling in a reactor with distilled water at 21℃ and pH 7...In this work it presents a strategy to obtain the ozone solubility in water by gradient step method. In this methodology, the ozone in mixture with oxygen is bubbling in a reactor with distilled water at 21℃ and pH 7. The ozone concentration on gas phase is continually increased after the saturation is reached. The method proposed is faster than conventional method （isocratic method）. The solubility from the gradient method is compared with that values obtained from correlations founded in the literature.展开更多
A membrane element model with bending modification based on element moment equilibrium is proposed for the first time by the authors, who apply the element model in one step inverse method and simulate the forming pro...A membrane element model with bending modification based on element moment equilibrium is proposed for the first time by the authors, who apply the element model in one step inverse method and simulate the forming process of a flower-shaped box using the membrane element model with and without this modification. The numerical results are compared with those of the incremental method to verify the validity of the element model developed in this paper.展开更多
This paper deals with the inertial manifold and the approximate inertialmanifold concepts of the Navier-Stokes equations with nonhomogeneous boundary conditions and inertial algorithm. Furtheremore,we provide the erro...This paper deals with the inertial manifold and the approximate inertialmanifold concepts of the Navier-Stokes equations with nonhomogeneous boundary conditions and inertial algorithm. Furtheremore,we provide the error estimates of the approximate solutions of the Navier-Stokes Equations.展开更多
This paper mainly proposes a new C-XSC （C- for eXtended Scientific Computing） software for the symmetric single step method and relaxation method for computing an enclosure for the solution set and compares the meth...This paper mainly proposes a new C-XSC （C- for eXtended Scientific Computing） software for the symmetric single step method and relaxation method for computing an enclosure for the solution set and compares the methods with others＇ and then makes some modifications and finally, examples illustrating the applicability of the proposed methods are given.展开更多
With the accelerating process of urbanization, the construction of expressway underpass tunnel faces more challenges, which is easy to induce the pavement settlement, especially the uneven settlement, which affects th...With the accelerating process of urbanization, the construction of expressway underpass tunnel faces more challenges, which is easy to induce the pavement settlement, especially the uneven settlement, which affects the normal operation of the highway to a certain extent. In order to actively explore the impact of tunnel underpass construction on the existing expressway and select a better construction method for its construction, this paper, based on the actual case level, carries out data simulation research on it through ANSYS and FLAC 3D, and finally obtains good research results.展开更多
To study the association of oxytocin (OT)'s distribution in hypothalamatic,pituitary and ovary,and understand how the OT secrete releasing in hypothalamus,pituitary and ovaries,the paraffin section immunohistochem...To study the association of oxytocin (OT)'s distribution in hypothalamatic,pituitary and ovary,and understand how the OT secrete releasing in hypothalamus,pituitary and ovaries,the paraffin section immunohistochemistry SuperPicTureTM two step method was used to detect the distribution of OT in hypothalamatic-pituitary-ovary axis of five femal Guangxi local buffalo. The test results could provide morphology according to study the OT's synthesis and mechanism of action,and could play reference and directions part in breeding Guangxi local buffalo. The test results display:oxytocin immuno reactive (OT-IR) neuronsw eremainly distributed arcuate nucleus,supraoptic nucleus and paraventricular nucleus,and OT-IR neurons was also found in ventromedial nucleus,ventrolateralis nucleus,suprachiasmaticus nucleus,dorsomedial nucleus,mamillary body,anterior hypothalamic nucleus and so on. The OT immunoactive production was found in pituitary and few OT-IR nerve fibers extended to post pituitary from hypophyseal stalk and medium eminence. In ovaries,OT immunoactive productions were only distributed in germinal epithelium cells,granulosa cells and lutein cells. The OT was first discovered in singulorum link of hypothalamatic-pituitary-ovary axis of Guangxi local buffalo. The OT immunoactive neurons were first discovered in every main nucleus of Guangxi local buffalo hypothalamus,especially distributed in arcuate nucleus,supraoptic nucleus and paraventricular nucleus.展开更多
[Objective] The aim of this study was to extract RNA,DNA and protein from plants by using modified one step method.[Method]CTAB was used for the modifying of Biozol-based one step extraction method,which was then used...[Objective] The aim of this study was to extract RNA,DNA and protein from plants by using modified one step method.[Method]CTAB was used for the modifying of Biozol-based one step extraction method,which was then used for the isolation of RNA,DNA and protein from the roots of maize（Zea mays L.）,soybean（Glycine max L.）,alfalfa（Medicago sativa L.）and cucumber（Cucumis sativus L.）.And the heme oxygenase-1 gene（HO-1）and calcium-dependent protein kinase-1 gene（CDPK1）,as well as HO-1 protein were identified.[Result]The result of UV spectrophotometer determination and agarose gel electrophoresis analysis showed that the purity of obtained RNA and DNA sample was relatively high;HO-1 and CDPK1 gene exhibited the positive signals checked by RT-PCR;the extracted protein could be used for western blotting analysis;the whole isolation procedure cost 3 h.[Conclusion]This method can be used as a good reference for researcher and will offer a better value with a wide range of applications.展开更多
A new variable time step method,which is called the backwards calculating time step method,is presented in this paper.It allows numerical simulation of soil freezing and thawing while avoiding "phase change missi...A new variable time step method,which is called the backwards calculating time step method,is presented in this paper.It allows numerical simulation of soil freezing and thawing while avoiding "phase change missing and overflowing".A sensitive heat capacity model is introduced through which the calculation errors are analyzed.Then the equation using the self-adjusted time step is presented and solved using finite differences.Through this equation,the time needed for a space cell to reach the phase change point temperature is calculated.Using this time allows the time step to be adjusted so that errors caused by "phase change missing and overflowing" are successfully eliminated.Above all,the obvious features of this method are an accelerated rate for adjusting the time step and simplifing the computations.An actual example proves that this method can accurately calculate the temperature fields during soil freezing and thawing.It is an improvement over traditional methods and can be widely used on complicated multi-dimensional phase change problems.展开更多
The physical model based on heat transfer theory and virtual boundary method for analyzing unsteady thermal field of rotor plate for eddy current retarder used in automobile is established and boundary conditions are ...The physical model based on heat transfer theory and virtual boundary method for analyzing unsteady thermal field of rotor plate for eddy current retarder used in automobile is established and boundary conditions are also defined. The finite element governing equation is derived by Galerkin method. The time differential item is discrete based on Galerkin format that is stable at any condition. And a new style of varying time step method is used in iteration process. The thermal field on the rotor plate at the radial and axle directions is analyzed and varying temperature at appointed points on two side-surfaces is measured. The testing and analytical data are uniform approximately. Finite element method can be used for estimating thermal field of the rotor plate at initial design stage of eddy current retarder.展开更多
The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of s...The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of slip surface is given, and the formula-tions of FERA based on incremental tangent stiffness method and modified Aitken accelerating algorithm are developed. The limited step length iteration method (LSLIM) is adopted to calculate the reliability index. The nonlinear FERA code using the SSA technique is developed and the main flow chart is illustrated. Numerical examples are used to demonstrate the efficiency and robustness of this method. It is found that the accelerating convergence algorithm proposed in this study proves to be very efficient for it can reduce the iteration number greatly, and LSLIM is also efficient for it can assure the convergence of the iteration of the reliability index.展开更多
Graphitic carbon nitride(g-C_(3)N_(4))-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy.In this work,we reported a facile one step in-situ hydrothermal-roasting metho...Graphitic carbon nitride(g-C_(3)N_(4))-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy.In this work,we reported a facile one step in-situ hydrothermal-roasting method for preparing honeycomb-like g-C_(3)N_(4)/CeO_(2) nanosheets with abundant oxygen vacancies(g-C_(3)N_(4)/CeO_(2)-x).The hydrothermal-roasting and incomplete-sealed state can(i)generate an in-situ reducing atmosphere(CO,N2,NH3) to tune the concentration of oxygen vacancies in CeO_(2);(ii) beneficial to prevent continuous growth of g-C_(3)N_(4) and results in honeycomb-like g-C_(3)N_(4)/CeO_(2)-x hybrid nanosheets.What is more,the g-C_(3)N_(4)/CeO_(2)-x photocatalyst exhibited extended photoresponse range,increased specific surface area and obviously enhanced separation efficiency of photogenerated electron-hole pairs.As a proof-of-concept application,the optimized g-C_(3)N_(4)/CeO_(2)-xnanosheets could achieve 98% removal efficiency for Cr(Ⅵ) under visible light irradiation(λ≥420 nm)within 2.5 h,which is significantly better than those of pure g-C_(3)N_(4) and CeO_(2).This work provides a new idea for more rationally designing and constructing g-C_(3)N_(4)-based catalysts for efficient extended photochemical application.展开更多
The dynamical theory was utilized to probe into the law of the excited response of granular ores generated by the exciting action of exciter and the influence of wave propagation in vibrating field. The exciter with d...The dynamical theory was utilized to probe into the law of the excited response of granular ores generated by the exciting action of exciter and the influence of wave propagation in vibrating field. The exciter with double axes was presented as an example, and the principle of exciter and its mathematical expression of the excitation force were given. The granular ores have viscidity and damping speciality, on the basis of which the motion equation of excited response of ores was established and the approximate expression of mode displacement by harmonic excitation and the steady effect solution of coordinate response were deduced. Utilizing the step by step integration method, the recursion relation matrix of displacement, velocity and acceleration of the excited response of ores were obtained, and the computational flow chart and a computational example were given. The results show that the excited response can change the dynamical character and the flowing characteristic of granular ores.展开更多
This paper is an attempt to improve the studen the written English level. There are three parts in this passage. Part one: Analyze the types of mistakes. Part two is "six - step" method in written English. P...This paper is an attempt to improve the studen the written English level. There are three parts in this passage. Part one: Analyze the types of mistakes. Part two is "six - step" method in written English. Part three is conclusion.展开更多
To reduce energy consumption on summer air conditioning,a novel seasonal soil cold storage mode using natural energy is presented and two-dimensional transient heat transfer model of U-tube is developed. The three pro...To reduce energy consumption on summer air conditioning,a novel seasonal soil cold storage mode using natural energy is presented and two-dimensional transient heat transfer model of U-tube is developed. The three processes of cold storage in winter,shut-down in transition season and cold extraction in summer are simulated by using sensitive heat capacity method with variable time step. The changing of U-tube outlet water temperature in different periods,daily cold storage and cold extraction are estimated. The temperature field of the U-tube and soil around the tube is investigated. Simulations show that seasonal soil cold storage using natural cold energy is feasible in the north to Changchun,which provides theoretical support for seasonal soil cold storage application.展开更多
During the construction of underground metro tunnel, different excavation methods will affect the stability of the structure. Taking the Shilao section tunnel of Dalian Metro Line 5 as the research background, this pa...During the construction of underground metro tunnel, different excavation methods will affect the stability of the structure. Taking the Shilao section tunnel of Dalian Metro Line 5 as the research background, this paper establishes the model by using FLAC3D finite difference software, and obtains the optimal construction scheme by comparing the structural deformation and land settlement of the original construction scheme with CRD method and CD three-step method. The results show that the vertical displacement and horizontal displacement meet the monitoring and control values after the construction of CRD method and CD three-step method. In the actual construction process, when the CD method is selected for three bench construction, the construction scheme of processing word steel in time after 6m of middle bench excavation can be selected for construction.展开更多
By introducing piezoelectric materials into hydrogel oral dressings,a microelectric field could be generated under stress stimulation,thus facilitating oral wound healing.However,to adapt to the moist and dynamic envi...By introducing piezoelectric materials into hydrogel oral dressings,a microelectric field could be generated under stress stimulation,thus facilitating oral wound healing.However,to adapt to the moist and dynamic environment of the oral cavity,traditional"step-by-step"synthesis often requires the combination of materials with different functionalities.Given the property differences between these materials,this strategy typically involves complex experimental procedures and unnecessary energy consumption.In this study,with the concept of"integrated construction",we innovatively proposed a dual-step photo-induced method and successfully fabricated composite hydrogels with excellent performance.We introduced abundant oxygen vacancies into ZnO,leveraging the enhanced interface dynamics to achieve sustained photo-induced effect.With a double-network polymer framework as a template,this method could achieve the photo-induced spontaneous in-situ synthesis of polydopamine(PDA)within hydrogel without any extra special experimental conditions and complex operation procedures.We conducted a thorough analysis of the mechanism underlying this photo-induced method and applied the as-prepared hydrogel for the treatment of oral wounds,which significantly accelerated the healing process due to the outstanding comprehensive performance of hydrogel.These results suggest novel ideas and theoretical support for the facile construction of high-performance hydrogels based on photodynamic principles,demonstrating immense potential for future applications in wound dressings.展开更多
In this paper, three numerical schemes with high accuracy for the coupled Schrodinger equations are studied. The conserwtive properties of the schemes are obtained and the plane wave solution is analysised. The split ...In this paper, three numerical schemes with high accuracy for the coupled Schrodinger equations are studied. The conserwtive properties of the schemes are obtained and the plane wave solution is analysised. The split step Runge-Kutta scheme is conditionally stable by linearized analyzed. The split step compact scheme and the split step spectral method are unconditionally stable. The trunction error of the schemes are discussed. The fusion of two solitions colliding with different β is shown in the figures. The numerical experments demonstrate that our algorithms are effective and reliable.展开更多
基金The National Natural Science Foundation of China(No50475073,50775036)the High Technology Research Program of Jiangsu Province(NoBG2006035)
文摘An improved finite difference method （FDM）is described to solve existing problems such as low efficiency and poor convergence performance in the traditional method adopted to derive the pressure distribution of aerostatic bearings. A detailed theoretical analysis of the pressure distribution of the orifice-compensated aerostatic journal bearing is presented. The nonlinear dimensionless Reynolds equation of the aerostatic journal bearing is solved by the finite difference method. Based on the principle of flow equilibrium, a new iterative algorithm named the variable step size successive approximation method is presented to adjust the pressure at the orifice in the iterative process and enhance the efficiency and convergence performance of the algorithm. A general program is developed to analyze the pressure distribution of the aerostatic journal bearing by Matlab tool. The results show that the improved finite difference method is highly effective, reliable, stable, and convergent. Even when very thin gas film thicknesses （less than 2 Win）are considered, the improved calculation method still yields a result and converges fast.
文摘Vanadium nitrides were prepared via one step method of carbothermal reduction and nitridation of vanadium trioxide. Thermalgravimetric analysis （TGA） and X-ray diffraction were used to determine the reaction paths of vanadium carbide, namely the following sequential reaction： V2O3→V8C7 in higher temperature stage, the rule of vanadium nitride synthesized was established, and defined conditions of temperature for the production of the carbides and nitrides were determined. Vanadium oxycarbide may consist in the front process of carbothermal reduction of vanadium trioxide. In one step method for vanadium nitride by carbothermal reduction and nitridation of vanadium trioxide, the nitridation process is simultaneous with the carbothermal reduction. A one-step mechanism of the carbothermal reduction with simultaneous nitridation leaded to a lower terminal temperature in nitridation process for vanadium nitride produced, compared with that of carbothermal reduction process without nitridation. The grain size and shape of vanadium nitride were uniform, and had the shape of a cube. The one step method combined vacuum carborization and nitridation （namely two step method） into one process. It simplified the technological process and decreased the costs.
基金financial support from Hunan Provincial Natura1 Science Foundation of China,Grant Number:02JJY2085,for this study
文摘The precise time step integration method proposed for linear time-invariant homogeneous dynamic systems can provide precise numerical results that approach an exact solution at the integration points. However, difficulty arises when the algorithm is used for non-homogeneous dynamic systems, due to the inverse matrix calculation and the simulation accuracy of the applied loading. By combining the Gaussian quadrature method and state space theory with the calculation technique of matrix exponential function in the precise time step integration method, a new modified precise time step integration method （e.g., an algorithm with an arbitrary order of accuracy） is proposed. In the new method, no inverse matrix calculation or simulation of the applied loading is needed, and the computing efficiency is improved. In particular, the proposed method is independent of the quality of the matrix H. If the matrix H is singular or nearly singular, the advantage of the method is remarkable. The numerical stability of the proposed algorithm is discussed and a numerical example is given to demonstrate the validity and efficiency of the algorithm.
文摘In this work it presents a strategy to obtain the ozone solubility in water by gradient step method. In this methodology, the ozone in mixture with oxygen is bubbling in a reactor with distilled water at 21℃ and pH 7. The ozone concentration on gas phase is continually increased after the saturation is reached. The method proposed is faster than conventional method （isocratic method）. The solubility from the gradient method is compared with that values obtained from correlations founded in the literature.
基金Project supported by the National Natural Science Foundation of China (No. 51075187)
文摘A membrane element model with bending modification based on element moment equilibrium is proposed for the first time by the authors, who apply the element model in one step inverse method and simulate the forming process of a flower-shaped box using the membrane element model with and without this modification. The numerical results are compared with those of the incremental method to verify the validity of the element model developed in this paper.
文摘This paper deals with the inertial manifold and the approximate inertialmanifold concepts of the Navier-Stokes equations with nonhomogeneous boundary conditions and inertial algorithm. Furtheremore,we provide the error estimates of the approximate solutions of the Navier-Stokes Equations.
文摘This paper mainly proposes a new C-XSC （C- for eXtended Scientific Computing） software for the symmetric single step method and relaxation method for computing an enclosure for the solution set and compares the methods with others＇ and then makes some modifications and finally, examples illustrating the applicability of the proposed methods are given.
文摘With the accelerating process of urbanization, the construction of expressway underpass tunnel faces more challenges, which is easy to induce the pavement settlement, especially the uneven settlement, which affects the normal operation of the highway to a certain extent. In order to actively explore the impact of tunnel underpass construction on the existing expressway and select a better construction method for its construction, this paper, based on the actual case level, carries out data simulation research on it through ANSYS and FLAC 3D, and finally obtains good research results.
基金Supported by Guangxi Scientific Fund Project (Guikezi0991042, Guikezi 0640015 and Guikezi 0832043)Guangxi Area Education Department Educational and Scientific Layout Project (C, 2006C3)+1 种基金Guangxi Education Department Scientific Research Fund (200709LX075)Guangxi Large Apparatus Collaborated Sharing Net~~
文摘To study the association of oxytocin (OT)'s distribution in hypothalamatic,pituitary and ovary,and understand how the OT secrete releasing in hypothalamus,pituitary and ovaries,the paraffin section immunohistochemistry SuperPicTureTM two step method was used to detect the distribution of OT in hypothalamatic-pituitary-ovary axis of five femal Guangxi local buffalo. The test results could provide morphology according to study the OT's synthesis and mechanism of action,and could play reference and directions part in breeding Guangxi local buffalo. The test results display:oxytocin immuno reactive (OT-IR) neuronsw eremainly distributed arcuate nucleus,supraoptic nucleus and paraventricular nucleus,and OT-IR neurons was also found in ventromedial nucleus,ventrolateralis nucleus,suprachiasmaticus nucleus,dorsomedial nucleus,mamillary body,anterior hypothalamic nucleus and so on. The OT immunoactive production was found in pituitary and few OT-IR nerve fibers extended to post pituitary from hypophyseal stalk and medium eminence. In ovaries,OT immunoactive productions were only distributed in germinal epithelium cells,granulosa cells and lutein cells. The OT was first discovered in singulorum link of hypothalamatic-pituitary-ovary axis of Guangxi local buffalo. The OT immunoactive neurons were first discovered in every main nucleus of Guangxi local buffalo hypothalamus,especially distributed in arcuate nucleus,supraoptic nucleus and paraventricular nucleus.
基金Supported by Opening Program of Physiologial Key Laboratory for Cultivation of Tropical Crops in Hainan Province(Key Opening Bio-logial Laboratory of Rubber of Ministry of Agriculture/Breeding Basein State and Provincial Key Laboratory)(KLOF0907)Major and Special Program for Cultivation of Genetically Modified New Varieties(No.2009ZX08012-014B)+1 种基金National Natural Science Foundation of China(No.30971711)Natural Science Foundation in Jiangsu Province(No.BK2009309)~~
文摘[Objective] The aim of this study was to extract RNA,DNA and protein from plants by using modified one step method.[Method]CTAB was used for the modifying of Biozol-based one step extraction method,which was then used for the isolation of RNA,DNA and protein from the roots of maize（Zea mays L.）,soybean（Glycine max L.）,alfalfa（Medicago sativa L.）and cucumber（Cucumis sativus L.）.And the heme oxygenase-1 gene（HO-1）and calcium-dependent protein kinase-1 gene（CDPK1）,as well as HO-1 protein were identified.[Result]The result of UV spectrophotometer determination and agarose gel electrophoresis analysis showed that the purity of obtained RNA and DNA sample was relatively high;HO-1 and CDPK1 gene exhibited the positive signals checked by RT-PCR;the extracted protein could be used for western blotting analysis;the whole isolation procedure cost 3 h.[Conclusion]This method can be used as a good reference for researcher and will offer a better value with a wide range of applications.
基金Project 2006G1662-00 supported by the Key Science and Technology Project of Heilongjiang Province
文摘A new variable time step method,which is called the backwards calculating time step method,is presented in this paper.It allows numerical simulation of soil freezing and thawing while avoiding "phase change missing and overflowing".A sensitive heat capacity model is introduced through which the calculation errors are analyzed.Then the equation using the self-adjusted time step is presented and solved using finite differences.Through this equation,the time needed for a space cell to reach the phase change point temperature is calculated.Using this time allows the time step to be adjusted so that errors caused by "phase change missing and overflowing" are successfully eliminated.Above all,the obvious features of this method are an accelerated rate for adjusting the time step and simplifing the computations.An actual example proves that this method can accurately calculate the temperature fields during soil freezing and thawing.It is an improvement over traditional methods and can be widely used on complicated multi-dimensional phase change problems.
基金Department of Science and Technology of Jiangsu Province,China(No. BE2003-46).
文摘The physical model based on heat transfer theory and virtual boundary method for analyzing unsteady thermal field of rotor plate for eddy current retarder used in automobile is established and boundary conditions are also defined. The finite element governing equation is derived by Galerkin method. The time differential item is discrete based on Galerkin format that is stable at any condition. And a new style of varying time step method is used in iteration process. The thermal field on the rotor plate at the radial and axle directions is analyzed and varying temperature at appointed points on two side-surfaces is measured. The testing and analytical data are uniform approximately. Finite element method can be used for estimating thermal field of the rotor plate at initial design stage of eddy current retarder.
基金supported by the National Natural Science Foundation of China (No. 50748033)the Specific Foundation for PhD of Hefei University of Technology (No. 2007GDBJ044), China
文摘The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of slip surface is given, and the formula-tions of FERA based on incremental tangent stiffness method and modified Aitken accelerating algorithm are developed. The limited step length iteration method (LSLIM) is adopted to calculate the reliability index. The nonlinear FERA code using the SSA technique is developed and the main flow chart is illustrated. Numerical examples are used to demonstrate the efficiency and robustness of this method. It is found that the accelerating convergence algorithm proposed in this study proves to be very efficient for it can reduce the iteration number greatly, and LSLIM is also efficient for it can assure the convergence of the iteration of the reliability index.
基金the National Natural Science Foundation of China(Nos.21103024,61171008)Natural Science Foundation of Zhejiang Province(No.LY19B060006)+1 种基金National Key Research and Development Program of China(No.2018YFB1502900)Technology Development Project of Jiaxing University(No.70518047)。
文摘Graphitic carbon nitride(g-C_(3)N_(4))-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy.In this work,we reported a facile one step in-situ hydrothermal-roasting method for preparing honeycomb-like g-C_(3)N_(4)/CeO_(2) nanosheets with abundant oxygen vacancies(g-C_(3)N_(4)/CeO_(2)-x).The hydrothermal-roasting and incomplete-sealed state can(i)generate an in-situ reducing atmosphere(CO,N2,NH3) to tune the concentration of oxygen vacancies in CeO_(2);(ii) beneficial to prevent continuous growth of g-C_(3)N_(4) and results in honeycomb-like g-C_(3)N_(4)/CeO_(2)-x hybrid nanosheets.What is more,the g-C_(3)N_(4)/CeO_(2)-x photocatalyst exhibited extended photoresponse range,increased specific surface area and obviously enhanced separation efficiency of photogenerated electron-hole pairs.As a proof-of-concept application,the optimized g-C_(3)N_(4)/CeO_(2)-xnanosheets could achieve 98% removal efficiency for Cr(Ⅵ) under visible light irradiation(λ≥420 nm)within 2.5 h,which is significantly better than those of pure g-C_(3)N_(4) and CeO_(2).This work provides a new idea for more rationally designing and constructing g-C_(3)N_(4)-based catalysts for efficient extended photochemical application.
基金TheNationalNaturalScienceFoundationofChina (No .5 0 0 740 34)
文摘The dynamical theory was utilized to probe into the law of the excited response of granular ores generated by the exciting action of exciter and the influence of wave propagation in vibrating field. The exciter with double axes was presented as an example, and the principle of exciter and its mathematical expression of the excitation force were given. The granular ores have viscidity and damping speciality, on the basis of which the motion equation of excited response of ores was established and the approximate expression of mode displacement by harmonic excitation and the steady effect solution of coordinate response were deduced. Utilizing the step by step integration method, the recursion relation matrix of displacement, velocity and acceleration of the excited response of ores were obtained, and the computational flow chart and a computational example were given. The results show that the excited response can change the dynamical character and the flowing characteristic of granular ores.
文摘This paper is an attempt to improve the studen the written English level. There are three parts in this passage. Part one: Analyze the types of mistakes. Part two is "six - step" method in written English. Part three is conclusion.
基金Sponsored by Heilongjiang Province Emphasis Science and Technology Project ( Grant No 2006G1662-00)
文摘To reduce energy consumption on summer air conditioning,a novel seasonal soil cold storage mode using natural energy is presented and two-dimensional transient heat transfer model of U-tube is developed. The three processes of cold storage in winter,shut-down in transition season and cold extraction in summer are simulated by using sensitive heat capacity method with variable time step. The changing of U-tube outlet water temperature in different periods,daily cold storage and cold extraction are estimated. The temperature field of the U-tube and soil around the tube is investigated. Simulations show that seasonal soil cold storage using natural cold energy is feasible in the north to Changchun,which provides theoretical support for seasonal soil cold storage application.
文摘During the construction of underground metro tunnel, different excavation methods will affect the stability of the structure. Taking the Shilao section tunnel of Dalian Metro Line 5 as the research background, this paper establishes the model by using FLAC3D finite difference software, and obtains the optimal construction scheme by comparing the structural deformation and land settlement of the original construction scheme with CRD method and CD three-step method. The results show that the vertical displacement and horizontal displacement meet the monitoring and control values after the construction of CRD method and CD three-step method. In the actual construction process, when the CD method is selected for three bench construction, the construction scheme of processing word steel in time after 6m of middle bench excavation can be selected for construction.
基金supported by the National Key R&D Program of China(2021YFB2012601)National Natural Science Foundation of China(No.U2230108)+2 种基金Shanghai Science and Technology Innovation Action Medical Innovation Research Project(23Y11910100)Shanghai Stomatological Hospital Institutional Project(Grant No.SSH-2022-02,SHH-2022-YJ-07,SSH-2023-02)Medical Engineering Integration Project of Fudan University.
文摘By introducing piezoelectric materials into hydrogel oral dressings,a microelectric field could be generated under stress stimulation,thus facilitating oral wound healing.However,to adapt to the moist and dynamic environment of the oral cavity,traditional"step-by-step"synthesis often requires the combination of materials with different functionalities.Given the property differences between these materials,this strategy typically involves complex experimental procedures and unnecessary energy consumption.In this study,with the concept of"integrated construction",we innovatively proposed a dual-step photo-induced method and successfully fabricated composite hydrogels with excellent performance.We introduced abundant oxygen vacancies into ZnO,leveraging the enhanced interface dynamics to achieve sustained photo-induced effect.With a double-network polymer framework as a template,this method could achieve the photo-induced spontaneous in-situ synthesis of polydopamine(PDA)within hydrogel without any extra special experimental conditions and complex operation procedures.We conducted a thorough analysis of the mechanism underlying this photo-induced method and applied the as-prepared hydrogel for the treatment of oral wounds,which significantly accelerated the healing process due to the outstanding comprehensive performance of hydrogel.These results suggest novel ideas and theoretical support for the facile construction of high-performance hydrogels based on photodynamic principles,demonstrating immense potential for future applications in wound dressings.
文摘In this paper, three numerical schemes with high accuracy for the coupled Schrodinger equations are studied. The conserwtive properties of the schemes are obtained and the plane wave solution is analysised. The split step Runge-Kutta scheme is conditionally stable by linearized analyzed. The split step compact scheme and the split step spectral method are unconditionally stable. The trunction error of the schemes are discussed. The fusion of two solitions colliding with different β is shown in the figures. The numerical experments demonstrate that our algorithms are effective and reliable.
