We describe the fabrication of high performance YBa2Cu3O7-δ （YBCO） radio frequency （RF） superconducting quantum interference devices （SQUIDs）, which were prepared on 5 mm×5 mm LaAlO3 （LAO） substrates by ...We describe the fabrication of high performance YBa2Cu3O7-δ （YBCO） radio frequency （RF） superconducting quantum interference devices （SQUIDs）, which were prepared on 5 mm×5 mm LaAlO3 （LAO） substrates by employing stepedge junctions （SEJs） and in flip-chip configuration with 12 mm×12 mm resonators. The step in the substrate was produced by Ar ion etching with step angles ranging from 47° to 61°, which is steep enough to ensure the formation of grain boundaries （GBs） at the step edges. The YBCO film was deposited using the pulsed laser deposition （PLD） technique with a film thickness half of the height of the substrate step. The inductance of the SQUID washer was designed to be about 157 pH. Under these circumstances, high performance YBCO RF SQUIDs were successfully fabricated with a typical flux-voltage transfer ratio of 83 mV/φ0, a white flux noise of 29 μφ0/√Hz, and the magnetic field sensitivity as high as 80 fT/√Hz. These devices have been applied in magnetocardiography and geological surveys.展开更多
We investigate nanorod assemblies of two 64-substituted pentacenes, namely （2,3-X2-9,10-Y2）-substituted pentacenes with X -- Y = OCH3 （MOP） and with X = F, Y-- OCH3 （MOPF）, grown on Au（111） single crystals. By...We investigate nanorod assemblies of two 64-substituted pentacenes, namely （2,3-X2-9,10-Y2）-substituted pentacenes with X -- Y = OCH3 （MOP） and with X = F, Y-- OCH3 （MOPF）, grown on Au（111） single crystals. By using a multi-technique approach based on ultraviolet photoelectron spectroscopy X-ray photoelectron spectroscopy; and X-ray absorption, we find evidence for charge transfer screening at the interface with gold. Furthermore, the MOP and MOPF nanorods show a rough surface morphology, which was investigated with atomic force microscopy. We use molecular simulation techniques to investigate the energetic barriers to diffusion and to traverse step-edges to estimate their influence on the nanorod roughness. We find that barriers to surface diffusion on a terrace are anisotropic and that their direction favors the formation of nanorods in these materials.展开更多
CSIRO has had a long-term research effort in superconductivity, in particular, since the discovery of HTS which promised big prospects. Significant progress has been made in research and development of HTS electronic ...CSIRO has had a long-term research effort in superconductivity, in particular, since the discovery of HTS which promised big prospects. Significant progress has been made in research and development of HTS electronic devices and systems for practical applications such as mineral and exploration as well as some niche applications in emerging science and technology areas. This article presents an overview of the CSIRO research activities in HTS supercon- ducting electronics since 1987, outlining the HTS junction and device technology as well as various application systems developed by the group.展开更多
基金supported by the National Basic Research Program of China(Grant No.2011CBA00106)the National Natural Science Foundation of China(Grant No.11074008)the Research Fund for the Doctoral Program of Higher Education,China(Grant No.20100001120006)
文摘We describe the fabrication of high performance YBa2Cu3O7-δ （YBCO） radio frequency （RF） superconducting quantum interference devices （SQUIDs）, which were prepared on 5 mm×5 mm LaAlO3 （LAO） substrates by employing stepedge junctions （SEJs） and in flip-chip configuration with 12 mm×12 mm resonators. The step in the substrate was produced by Ar ion etching with step angles ranging from 47° to 61°, which is steep enough to ensure the formation of grain boundaries （GBs） at the step edges. The YBCO film was deposited using the pulsed laser deposition （PLD） technique with a film thickness half of the height of the substrate step. The inductance of the SQUID washer was designed to be about 157 pH. Under these circumstances, high performance YBCO RF SQUIDs were successfully fabricated with a typical flux-voltage transfer ratio of 83 mV/φ0, a white flux noise of 29 μφ0/√Hz, and the magnetic field sensitivity as high as 80 fT/√Hz. These devices have been applied in magnetocardiography and geological surveys.
文摘We investigate nanorod assemblies of two 64-substituted pentacenes, namely （2,3-X2-9,10-Y2）-substituted pentacenes with X -- Y = OCH3 （MOP） and with X = F, Y-- OCH3 （MOPF）, grown on Au（111） single crystals. By using a multi-technique approach based on ultraviolet photoelectron spectroscopy X-ray photoelectron spectroscopy; and X-ray absorption, we find evidence for charge transfer screening at the interface with gold. Furthermore, the MOP and MOPF nanorods show a rough surface morphology, which was investigated with atomic force microscopy. We use molecular simulation techniques to investigate the energetic barriers to diffusion and to traverse step-edges to estimate their influence on the nanorod roughness. We find that barriers to surface diffusion on a terrace are anisotropic and that their direction favors the formation of nanorods in these materials.
文摘CSIRO has had a long-term research effort in superconductivity, in particular, since the discovery of HTS which promised big prospects. Significant progress has been made in research and development of HTS electronic devices and systems for practical applications such as mineral and exploration as well as some niche applications in emerging science and technology areas. This article presents an overview of the CSIRO research activities in HTS supercon- ducting electronics since 1987, outlining the HTS junction and device technology as well as various application systems developed by the group.
