Selection of quantitative characteristics, division of their expression ranges, and selection of example varieties are key issues on developing DUS Test Guidelines, which are more crucial for quantitative characterist...Selection of quantitative characteristics, division of their expression ranges, and selection of example varieties are key issues on developing DUS Test Guidelines, which are more crucial for quantitative characteristics since their expressions vary in different degrees. Taking the development of DUS Test Guideline of Ranunculus asiaticus L. as an example, this paper applied statistic-based approaches for the analyses of quantitative characteristics. We selected 9 quantitative characteristics from 18 pre-selected characteristics, based on within-variety uniformity, stability between different growing cycles, and correlation among characteristics, by the analyses of coefficient of variation, paired-samples t-test and partial correlation. The expression ranges of the 9 selected quantitative characteristics were divided into different states using descriptive statistics and distribution frequency of varieties. Eight of the 9 selected quantitative characteristics were categorized as standard characteristics as they showed one peak in distribution frequency of 120 varieties in various expressions of the characteristics, whereas, plant height can be categorized as grouping characteristic since it gave two peaks, and can group the varieties into pot and cut varieties. Finally, box-plot was applied to visually select the example varieties, and varieties 7, 12, and 28 were determined as the example varieties for plant height. The methods described in this paper are effective for the selection of quantitative characteristics, division of expression ranges, and selection of example varieties in Ranunculus asiaticus L. for DUS test, and may also be interest for other plant genera.展开更多
[Objective] The study aimed to compare several statistical analysis models for estimating the sugarcane （Saccharum spp.） genotypic stability. [Method] The data of sugarcane regional trials in Guangdong, in 2009 was ...[Objective] The study aimed to compare several statistical analysis models for estimating the sugarcane （Saccharum spp.） genotypic stability. [Method] The data of sugarcane regional trials in Guangdong, in 2009 was analyzed by three models respectively： Finlay and Wilkinson model： the additive main effects and multiplicative interaction （AMMI） model and linear regression-principal components analysis （LR- PCA） model, so as to compare the models. [Result] The Finlay and Wilkinson model was easier, but the analysis of the other two models was more comprehensive, and there was a bit difference between the additive main effects and multiplicative inter- action （AMMI） model and linear regression-principal components analysis （LR-PCA） model. [Conclusion] In practice, while the proper statistical method was usually con- sidered according to the different data, it should be also considered that the same data should be analyzed with different statistical methods in order to get a more reasonable result by comparison.展开更多
An innovative application of laser ablation inductively coupled plasma mass spectrometry （LA-ICP-MS） technique in illustrating elemental distributions on stainless steel sheets was presented. The technique proved to...An innovative application of laser ablation inductively coupled plasma mass spectrometry （LA-ICP-MS） technique in illustrating elemental distributions on stainless steel sheets was presented. The technique proved to be a systematic and accurate ap- proach in producing visual images or maps of elemental distributions at cross-sectional surface of a stainless steel sheet. Two stain- less steel sheets served as research objects： 3 mm×l 300 mm hot-rolled stainless steel plate and 1 mm×l 260 mm cold-rolled plate. The cross-sectional surfaces of the two samples at 1/4 position along the width direction were scanned （raster area -44 mm2 and 11 mm2） with a focused laser beam （wavelength 213 nm, diameter of laser crater 100 μm, and laser power 1.6 mJ） in a laser abla- tion chamber. The laser ablation system was coupled to a quadrupole ICP-MS, which made the detection of ion intensities of 27A1＋, 44Ca＋, 47Ti-, 55Mn＋ and 56Fe＋ within an area of interest possible. One-dimensional （ID） content line distribution maps and two- dimensional （2D） contour maps for specific positions or areas were plotted to indicate the element distribution of a target area with high accuracy. Statistic method was used to analyze the acquired data by calculating median contents, maximum segregation, sta- tistic segregation and content-frequency distribution.展开更多
Prediction of reservoir fracture is the key to explore fracture-type reservoir. When a shear-wave propagates in anisotropic media containing fracture,it splits into two polarized shear waves: fast shear wave and slow ...Prediction of reservoir fracture is the key to explore fracture-type reservoir. When a shear-wave propagates in anisotropic media containing fracture,it splits into two polarized shear waves: fast shear wave and slow shear wave. The polarization and time delay of the fast and slow shear wave can be used to predict the azimuth and density of fracture. The current identification method of fracture azimuth and fracture density is cross-correlation method. It is assumed that fast and slow shear waves were symmetrical wavelets after completely separating,and use the most similar characteristics of wavelets to identify fracture azimuth and density,but in the experiment the identification is poor in accuracy. Pearson correlation coefficient method is one of the methods for separating the fast wave and slow wave. This method is faster in calculating speed and better in noise immunity and resolution compared with the traditional cross-correlation method. Pearson correlation coefficient method is a non-linear problem,particle swarm optimization( PSO) is a good nonlinear global optimization method which converges fast and is easy to implement. In this study,PSO is combined with the Pearson correlation coefficient method to achieve identifying fracture property and improve the computational efficiency.展开更多
Based on tidal data statistical analysis for 20 years of Tanggu Marine Environmental Monitoring Station from 1991 to 2010, we concluded that an average of nearly 10 days of 100 cm above water increase took place at Ti...Based on tidal data statistical analysis for 20 years of Tanggu Marine Environmental Monitoring Station from 1991 to 2010, we concluded that an average of nearly 10 days of 100 cm above water increase took place at Tianjin coast every year. The maximum high tide and average tide of Tianjin coast occurred in summer and autumn, and the maximum water increase also occurred in summer and autumn. Days with water increase more than 100 cm mostly occurred in spring, autumn and winter. Then we summarized the causes of coastal storm surge disaster in Tianjin based on astronomical tide factors, meteorological factors, sea level rise, land subsidence, and geographic factors, et al. Finally, we proposed storm surge disaster prevention measures.展开更多
This paper summarizes a few spatial statistical analysis methods for to measuring spatial autocorrelation and spatial association, discusses the criteria for the identification of spatial association by the use of glo...This paper summarizes a few spatial statistical analysis methods for to measuring spatial autocorrelation and spatial association, discusses the criteria for the identification of spatial association by the use of global Moran Coefficient, Local Moran and Local Geary. Furthermore, a user-friendly statistical module, combining spatial statistical analysis methods with GIS visual techniques, is developed in Arcview using Avenue. An example is also given to show the usefulness of this module in identifying and quantifying the underlying spatial association patterns between economic units.展开更多
Understanding the controlling factor of groundwater quality can enhance promoting sustainable development of groundwater resources. To this end, multivariate statistical analysis（MA） and hydrochemical analysis were ...Understanding the controlling factor of groundwater quality can enhance promoting sustainable development of groundwater resources. To this end, multivariate statistical analysis（MA） and hydrochemical analysis were introduced in this work. The results indicate that the canonical discriminant function with 7 parameters was established using the discriminant analysis（DA） method, which can afford 100% correct assignation according to the 3 different clusters（good water（GW）, poor water（PW）, and very poor water（VPW）） obtained from cluster analysis（CA）. According to factor analysis（FA）, 8 factors were extracted from 25 hydrochemical elements and account for 80.897% of the total data variance, suggesting that groundwater with higher concentrations of sodium, calcium, magnesium, chloride, and sulfate in southeastern study area are mainly affected by the natural process; the higher level of arsenic and chromium in groundwater extracted from northwestern part of study area are derived by industrial activities; domestic and agriculture sewage have important contribution to copper, iron, iodine, and phosphate in the northern study area. Therefore, this work can help identify the main controlling factor of groundwater quality in North China plain so as to make better and more informed decisions about how to achieve groundwater resources sustainable development.展开更多
[Objective] To introduce a convenient and easy way for the statistical anal- ysis on field efficacy trials of pesticide by using Visual Basic. [Method] The calcula- tion procedure of using Visual Basic to conduct stat...[Objective] To introduce a convenient and easy way for the statistical anal- ysis on field efficacy trials of pesticide by using Visual Basic. [Method] The calcula- tion procedure of using Visual Basic to conduct statistical analysis on the field efficacy of pesticides was introduced, and an example was used to illustrate the usage and skill of the program. [Result] The procedure could quickly and accurately con- duct statistical analysis on the field efficacy of pesticide by only inputting initial data of the test, and it could compare the significance of differences between various fac- tors. Its calculated results were consistent with the results of the specialized statisti- cal software DPS. [Conclusion] It is a quick and simple method with high accuracy and reliability, which can greatly improve the efficiency of pesticide formulation opti- mization.展开更多
Meretricis concha is a kind of marine traditional Chinese medicine(TCM), and has been commonly used for the treatment of asthma and scald burns. In order to investigate the relationship between the inorganic elemental...Meretricis concha is a kind of marine traditional Chinese medicine(TCM), and has been commonly used for the treatment of asthma and scald burns. In order to investigate the relationship between the inorganic elemental fingerprint and the geographical origin identification of Meretricis concha, the elemental contents of M. concha from five sampling points in Rushan Bay have been determined by means of inductively coupled plasma optical emission spectrometry(ICP-OES). Based on the contents of 14 inorganic elements(Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, and Zn), the inorganic elemental fingerprint which well reflects the elemental characteristics was constructed. All the data from the five sampling points were discriminated with accuracy through hierarchical cluster analysis(HCA) and principle component analysis(PCA), indicating that a four-factor model which could explain approximately 80% of the detection data was established, and the elements Al, As, Cd, Cu, Ni and Pb could be viewed as the characteristic elements. This investigation suggests that the inorganic elemental fingerprint combined with multivariate statistical analysis is a promising method for verifying the geographical origin of M. concha, and this strategy should be valuable for the authenticity discrimination of some marine TCM.展开更多
How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interio...How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis （SEA） model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics （CFD） and sensitivity analysis of acoustic contribution.展开更多
Based on the Tropical Cyclone(TC briefly thereafter)Yearbook 1980-2009,this paper first analyzes the number and intensity change of the TCs which passed directly over or by the side of Poyang Lake(the distance of TC c...Based on the Tropical Cyclone(TC briefly thereafter)Yearbook 1980-2009,this paper first analyzes the number and intensity change of the TCs which passed directly over or by the side of Poyang Lake(the distance of TC center is less than 1°longitude or 1°latitude from the Lake)among all the landfalling TCs in China during the past 30 years.Two cases are examined in detail in this paper.One is severe typhoon Rananim with a speed of 3.26 m/s and a change of 1 hPa in intensity when it was passing the Lake.The other is super typhoon Saomai with a faster moving speed of 6.50 m/s and a larger change in intensity of 6 hPa.Through numerical simulation experiments,this paper analyzes how the change of underlying surface from water to land contributes to the differences in intensity,speed and mesoscale convection of the two TCs when they passed the Lake.Results show that the moisture and dynamic condition above the Lake were favorable for the maintenance of the intensity when Rananim was passing through Poyang Lake,despite the moisture supply from the ocean was cut off.As a result,there was strong convection around the lake which led to a rainfall spinning counter-clockwise as it was affected by the TC movement.However,little impact was seen in the Saomai case.These results indicate that for the TCs coming ashore on Poyang Lake with a slow speed,the large water body is conducive to the sustaining of the intensity and strengthening of the convection around the TC center and the subsequent heavy rainfall.On the contrary,a fast-moving TC is less likely to be influenced by the underlying surface in terms of intensity and speed.展开更多
To study the distribution law and random characteristics of casting defects in steel castings,24 civil engineering structural cast steel joints were divided into two groups:simple cast steel joints and complex cast st...To study the distribution law and random characteristics of casting defects in steel castings,24 civil engineering structural cast steel joints were divided into two groups:simple cast steel joints and complex cast steel joints.Three kinds of nondestructive testing(NDT)methods,namely,visual,magnetic particle,and ultrasonic inspections,were used to detect the macroscopic defects in joints.The NDT results were then statistically analyzed.The results show that the unfused core support is a common defect of complex cast steel joints,and the defect can be seen visually,so excavation and repair welding should be carried out before castings leave factories.Casting cracks are extremely likely to occur in the intersection area of tubes,which is called the ultrasonic inspection blind zone.The occurrence probability of gas pores on simple cast steel joints is the largest,and the occurrence probability of core support incomplete fusions on complex cast steel joints is the largest.However,when cast steel joints are counted as a whole sample,the occurrence probability of gas pores is larger than that of core support incomplete fusions.Therefore,it is the most common defect in cast steel joints.展开更多
Based on the data of phytoplankton concentration and environmental factors in Bohai Bay from May to September in 2003. the relationship between environmental factors and phytoplankton biomass was analyzed. By analysis...Based on the data of phytoplankton concentration and environmental factors in Bohai Bay from May to September in 2003. the relationship between environmental factors and phytoplankton biomass was analyzed. By analysis of variance, the weather condition was found to have no direct relation with phytoplankton biomass. Correlation coefficients showed that temperature, pH value,the concentrations of silicate and nitrate exhibited linear relationship with phytoplankton biomass.With principal component analysis, pollution types which affected the abundance of phytoplankton included point sources such as municipal and industrial effluents, agricultural runoff and earth＇s surface water. Using multivariate stepwise regression method and taking the correlation analysis results into consideration, a multi-step regression equation was developed to predict the concentration of phytoplankton in September 2003. Combined results show that temperature, pH value, the concentrations of silicate and nitrate are the critical ecological factors affecting the phytoplankton biomass in Bohai Bay.展开更多
Gyro's fault diagnosis plays a critical role in inertia navigation systems for higher reliability and precision. A new fault diagnosis strategy based on the statistical parameter analysis (SPA) and support vector ...Gyro's fault diagnosis plays a critical role in inertia navigation systems for higher reliability and precision. A new fault diagnosis strategy based on the statistical parameter analysis (SPA) and support vector machine (SVM) classification model was proposed for dynamically tuned gyroscopes (DTG). The SPA, a kind of time domain analysis approach, was introduced to compute a set of statistical parameters of vibration signal as the state features of DTG, with which the SVM model, a novel learning machine based on statistical learning theory (SLT), was applied and constructed to train and identify the working state of DTG. The experimental results verify that the proposed diagnostic strategy can simply and effectively extract the state features of DTG, and it outperforms the radial-basis function (RBF) neural network based diagnostic method and can more reliably and accurately diagnose the working state of DTG.展开更多
BACKGROUND： Previously, time data were analyzed by using constituent ratio or relative ratio; however, circular statistical analysis could exactly provide average peak phase of diseases. OBJECTIVE： To investigate th...BACKGROUND： Previously, time data were analyzed by using constituent ratio or relative ratio; however, circular statistical analysis could exactly provide average peak phase of diseases. OBJECTIVE： To investigate the correlation of solar term peak with onset and death of acute ischemic stroke. DESIGN： Retrospective case analysis. SETTINGS： Emergency Department of Foshan Municipal Hospital of Traditional Chinese Medicine; Department of Science and Education, the Second People＇s Hospital of Foshan. PARTICIPANTS： A total of 1 597 patients with acute ischemic stroke were selected from Emergency Room, Department of Neurology, Foshan Municipal Hospital of Traditional Chinese Medicine from 1994 to 2002. There were 875 males and 722 females, and their ages ranged from 33 to 97 years. All cases met the diagnostic criteria of acute cerebral infarction modified by the Second National Cerebrovascular Disease Academic Meeting; meanwhile, they were diagnosed with CT/MRI test. Patients and their relatives provided the confirmed consent. METHODS： Solar term of onset was retrospectively analyzed in 1 597 patients with acute ischemic stroke; among them, solar term of death in 90 cases were analyzed by using circular statistical analysis to calculate peak phase of onset and death of acute ischemic stroke and investigate the correlation of solar term with onset and death of acute ischemic stroke. MAIN OUTCOME MEASURES： Onset and death time of patients with acute ischemic stroke. RESULTS： Solar term of onset in 1 597 patients, especially solar term of death in 90 patients, was not concentrated （P 〉 0.05）, and specific peak phase was not found out. Acute ischemic stroke low attacked from vernal equinox to summer begins, but death caused by acute ischemic stroke high attacked from grain buds to autumn begins. CONCLUSION： Patients with acute ischemic stroke do not have specific solar term peak of onset and death.展开更多
Based on best track data of tropical cyclones（TCs） from the Japan Meteorological Agency, the characteristics of suddenly reversed TCs（SRTCs）, which have turning angles usually approaching 180°, are statistica...Based on best track data of tropical cyclones（TCs） from the Japan Meteorological Agency, the characteristics of suddenly reversed TCs（SRTCs）, which have turning angles usually approaching 180°, are statistically analyzed from 1949 to 2011 over the western North Pacific Ocean. The typical large-scale circulation patterns of SRTCs are investigated using reanalysis data and dynamical composite analysis. Results show that turnings mainly occur in low latitudes between 10°N and 20°N,and mainly west of 135°E. The majority of SRTCs reach their peak intensity at, or slightly before, the turning time and subsequently decrease at some variable rate. Specifically, SRTCs are divided into four types, each containing two groups（i.e.eight groups in total） in terms of the moving-direction changes. The moving speed of all SRTC types except the south–north type decreases to its lowest during the 24 h, corresponding to a significant reduction in the primary steering components.According to the analysis of the 13 typical flow patterns found in this study, we suggest that sudden track changes are caused by the reversal steering flow. The original balance of the background flow patterns are broken up by new systems, e.g. binary TCs or dispersion-induced anticyclones. Additionally, sudden track changes are often due to double ridge variations of the subtropical high or weakened/strengthened high pressure in the east and west, respectively.展开更多
Security is a vital parameter to conserve energy in wireless sensor networks(WSN).Trust management in the WSN is a crucial process as trust is utilized when collaboration is important for accomplishing trustworthy dat...Security is a vital parameter to conserve energy in wireless sensor networks(WSN).Trust management in the WSN is a crucial process as trust is utilized when collaboration is important for accomplishing trustworthy data transmission.But the available routing techniques do not involve security in the design of routing techniques.This study develops a novel statistical analysis with dingo optimizer enabled reliable routing scheme(SADO-RRS)for WSN.The proposed SADO-RRS technique aims to detect the existence of attacks and optimal routes in WSN.In addition,the presented SADORRS technique derives a new statistics based linear discriminant analysis(LDA)for attack detection,Moreover,a trust based dingo optimizer(TBDO)algorithm is applied for optimal route selection in the WSN and accomplishes secure data transmission in WSN.Besides,the TBDO algorithm involves the derivation of the fitness function involving different input variables of WSN.For demonstrating the enhanced outcomes of the SADO-RRS technique,a wide range of simulations was carried out and the outcomes demonstrated the enhanced outcomes of the SADO-RRS technique.展开更多
Due to the advances of intelligent transportation system(ITSs),traffic forecasting has gained significant interest as robust traffic prediction acts as an important part in different ITSs namely traffic signal control...Due to the advances of intelligent transportation system(ITSs),traffic forecasting has gained significant interest as robust traffic prediction acts as an important part in different ITSs namely traffic signal control,navigation,route mapping,etc.The traffic prediction model aims to predict the traffic conditions based on the past traffic data.For more accurate traffic prediction,this study proposes an optimal deep learning-enabled statistical analysis model.This study offers the design of optimal convolutional neural network with attention long short term memory(OCNN-ALSTM)model for traffic prediction.The proposed OCNN-ALSTM technique primarily preprocesses the traffic data by the use of min-max normalization technique.Besides,OCNN-ALSTM technique was executed for classifying and predicting the traffic data in real time cases.For enhancing the predictive outcomes of the OCNN-ALSTM technique,the bird swarm algorithm(BSA)is employed to it and thereby overall efficacy of the network gets improved.The design of BSA for optimal hyperparameter tuning of the CNN-ALSTM model shows the novelty of the work.The experimental validation of the OCNNALSTM technique is performed using benchmark datasets and the results are examined under several aspects.The simulation results reported the enhanced outcomes of the OCNN-ALSTM model over the recent methods under several dimensions.展开更多
Statistical analysis was done on simultaneous wave and wind using data recorded by discus-shape wave buoy. The area is located in the southern Caspian Sea near the Anzali Port. Recorded wave data were obtained through...Statistical analysis was done on simultaneous wave and wind using data recorded by discus-shape wave buoy. The area is located in the southern Caspian Sea near the Anzali Port. Recorded wave data were obtained through directional spectrum wave analysis. Recorded wind direction and wind speed were obtained through the related time series as well. For 12-month measurements（May 25 2007-2008）, statistical calculations were done to specify the value of nonlinear auto-correlation of wave and wind using the probability distribution function of wave characteristics and statistical analysis in various time periods. The paper also presents and analyzes the amount of wave energy for the area mentioned on the basis of available database. Analyses showed a suitable comparison between the amounts of wave energy in different seasons. As a result, the best period for the largest amount of wave energy was known. Results showed that in the research period, the mean wave and wind auto correlation were about three hours. Among the probability distribution functions, i.e Weibull, Normal, Lognormal and Rayleigh, ＂Weibull＂ had the best consistency with experimental distribution function shown in different diagrams for each season. Results also showed that the mean wave energy in the research period was about 49.88 k W/m and the maximum density of wave energy was found in February and March, 2010.展开更多
Statistical Energy Analysis(SEA)is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure.This study investigates the application of the corrected SEA model in a non-reverberan...Statistical Energy Analysis(SEA)is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure.This study investigates the application of the corrected SEA model in a non-reverberant acoustic space where the direct field component from the sound source dominates the total sound field rather than a diffuse field in a reverberant space which the classical SEA model assumption is based on.A corrected SEA model is proposed where the direct field component in the energy is removed and the power injected in the subsystem considers only the remaining power after the loss at first reflection.Measurement was conducted in a box divided into two rooms separated by a partition with an opening where the condition of reverberant and non-reverberant can conveniently be controlled.In the case of a non-reverberant space where acoustic material was installed inside the wall of the experimental box,the signals are corrected by eliminating the direct field component in the measured impulse response.Using the corrected SEA model,comparison of the coupling loss factor(CLF)and damping loss factor(DLF)with the theory shows good agreement.展开更多
基金supported by the Special Fund for Agroscientific Research in the Public Interest of Ministry of Agriculture,China(200903008-14)
文摘Selection of quantitative characteristics, division of their expression ranges, and selection of example varieties are key issues on developing DUS Test Guidelines, which are more crucial for quantitative characteristics since their expressions vary in different degrees. Taking the development of DUS Test Guideline of Ranunculus asiaticus L. as an example, this paper applied statistic-based approaches for the analyses of quantitative characteristics. We selected 9 quantitative characteristics from 18 pre-selected characteristics, based on within-variety uniformity, stability between different growing cycles, and correlation among characteristics, by the analyses of coefficient of variation, paired-samples t-test and partial correlation. The expression ranges of the 9 selected quantitative characteristics were divided into different states using descriptive statistics and distribution frequency of varieties. Eight of the 9 selected quantitative characteristics were categorized as standard characteristics as they showed one peak in distribution frequency of 120 varieties in various expressions of the characteristics, whereas, plant height can be categorized as grouping characteristic since it gave two peaks, and can group the varieties into pot and cut varieties. Finally, box-plot was applied to visually select the example varieties, and varieties 7, 12, and 28 were determined as the example varieties for plant height. The methods described in this paper are effective for the selection of quantitative characteristics, division of expression ranges, and selection of example varieties in Ranunculus asiaticus L. for DUS test, and may also be interest for other plant genera.
基金Supported by the Guangdong Technological Program (2009B02001002)the Special Funds of National Agricultural Department for Commonweal Trade Research (nyhyzx07-019)the Earmarked Fund for Modern Agro-industry Technology Research System~~
文摘[Objective] The study aimed to compare several statistical analysis models for estimating the sugarcane （Saccharum spp.） genotypic stability. [Method] The data of sugarcane regional trials in Guangdong, in 2009 was analyzed by three models respectively： Finlay and Wilkinson model： the additive main effects and multiplicative interaction （AMMI） model and linear regression-principal components analysis （LR- PCA） model, so as to compare the models. [Result] The Finlay and Wilkinson model was easier, but the analysis of the other two models was more comprehensive, and there was a bit difference between the additive main effects and multiplicative inter- action （AMMI） model and linear regression-principal components analysis （LR-PCA） model. [Conclusion] In practice, while the proper statistical method was usually con- sidered according to the different data, it should be also considered that the same data should be analyzed with different statistical methods in order to get a more reasonable result by comparison.
基金Sponsored by National Major Instrument and Equipment Development Special Project of China(2011YQ14014710)
文摘An innovative application of laser ablation inductively coupled plasma mass spectrometry （LA-ICP-MS） technique in illustrating elemental distributions on stainless steel sheets was presented. The technique proved to be a systematic and accurate ap- proach in producing visual images or maps of elemental distributions at cross-sectional surface of a stainless steel sheet. Two stain- less steel sheets served as research objects： 3 mm×l 300 mm hot-rolled stainless steel plate and 1 mm×l 260 mm cold-rolled plate. The cross-sectional surfaces of the two samples at 1/4 position along the width direction were scanned （raster area -44 mm2 and 11 mm2） with a focused laser beam （wavelength 213 nm, diameter of laser crater 100 μm, and laser power 1.6 mJ） in a laser abla- tion chamber. The laser ablation system was coupled to a quadrupole ICP-MS, which made the detection of ion intensities of 27A1＋, 44Ca＋, 47Ti-, 55Mn＋ and 56Fe＋ within an area of interest possible. One-dimensional （ID） content line distribution maps and two- dimensional （2D） contour maps for specific positions or areas were plotted to indicate the element distribution of a target area with high accuracy. Statistic method was used to analyze the acquired data by calculating median contents, maximum segregation, sta- tistic segregation and content-frequency distribution.
文摘Prediction of reservoir fracture is the key to explore fracture-type reservoir. When a shear-wave propagates in anisotropic media containing fracture,it splits into two polarized shear waves: fast shear wave and slow shear wave. The polarization and time delay of the fast and slow shear wave can be used to predict the azimuth and density of fracture. The current identification method of fracture azimuth and fracture density is cross-correlation method. It is assumed that fast and slow shear waves were symmetrical wavelets after completely separating,and use the most similar characteristics of wavelets to identify fracture azimuth and density,but in the experiment the identification is poor in accuracy. Pearson correlation coefficient method is one of the methods for separating the fast wave and slow wave. This method is faster in calculating speed and better in noise immunity and resolution compared with the traditional cross-correlation method. Pearson correlation coefficient method is a non-linear problem,particle swarm optimization( PSO) is a good nonlinear global optimization method which converges fast and is easy to implement. In this study,PSO is combined with the Pearson correlation coefficient method to achieve identifying fracture property and improve the computational efficiency.
文摘Based on tidal data statistical analysis for 20 years of Tanggu Marine Environmental Monitoring Station from 1991 to 2010, we concluded that an average of nearly 10 days of 100 cm above water increase took place at Tianjin coast every year. The maximum high tide and average tide of Tianjin coast occurred in summer and autumn, and the maximum water increase also occurred in summer and autumn. Days with water increase more than 100 cm mostly occurred in spring, autumn and winter. Then we summarized the causes of coastal storm surge disaster in Tianjin based on astronomical tide factors, meteorological factors, sea level rise, land subsidence, and geographic factors, et al. Finally, we proposed storm surge disaster prevention measures.
文摘This paper summarizes a few spatial statistical analysis methods for to measuring spatial autocorrelation and spatial association, discusses the criteria for the identification of spatial association by the use of global Moran Coefficient, Local Moran and Local Geary. Furthermore, a user-friendly statistical module, combining spatial statistical analysis methods with GIS visual techniques, is developed in Arcview using Avenue. An example is also given to show the usefulness of this module in identifying and quantifying the underlying spatial association patterns between economic units.
基金supported by the Major State Basic Research Development Program (No. 2010CB428800)the Geological Survey Projects Foundation of Institute of Hydrogeology and Environmental Geology (No. SK201308)
文摘Understanding the controlling factor of groundwater quality can enhance promoting sustainable development of groundwater resources. To this end, multivariate statistical analysis（MA） and hydrochemical analysis were introduced in this work. The results indicate that the canonical discriminant function with 7 parameters was established using the discriminant analysis（DA） method, which can afford 100% correct assignation according to the 3 different clusters（good water（GW）, poor water（PW）, and very poor water（VPW）） obtained from cluster analysis（CA）. According to factor analysis（FA）, 8 factors were extracted from 25 hydrochemical elements and account for 80.897% of the total data variance, suggesting that groundwater with higher concentrations of sodium, calcium, magnesium, chloride, and sulfate in southeastern study area are mainly affected by the natural process; the higher level of arsenic and chromium in groundwater extracted from northwestern part of study area are derived by industrial activities; domestic and agriculture sewage have important contribution to copper, iron, iodine, and phosphate in the northern study area. Therefore, this work can help identify the main controlling factor of groundwater quality in North China plain so as to make better and more informed decisions about how to achieve groundwater resources sustainable development.
基金Supported by the Scientific and Technological Foundation for Special Basic Research of Chinese Academy of Tropical Agricultural Science(2012hzs1J002)the National Natural Science Foundation of China(31101465)the Research Fund for Welfare Industry(Agriculture)(201103026)~~
文摘[Objective] To introduce a convenient and easy way for the statistical anal- ysis on field efficacy trials of pesticide by using Visual Basic. [Method] The calcula- tion procedure of using Visual Basic to conduct statistical analysis on the field efficacy of pesticides was introduced, and an example was used to illustrate the usage and skill of the program. [Result] The procedure could quickly and accurately con- duct statistical analysis on the field efficacy of pesticide by only inputting initial data of the test, and it could compare the significance of differences between various fac- tors. Its calculated results were consistent with the results of the specialized statisti- cal software DPS. [Conclusion] It is a quick and simple method with high accuracy and reliability, which can greatly improve the efficiency of pesticide formulation opti- mization.
基金supposed by the Program for Science and Technology of Shandong Province (2011GHY11521)the Department of Education of Shandong Province (No. J11LB07)the Natural Science Foundation of Qingdao City (Nos. 12-1-3-52-(1)-nsh and 12-1-4-16-(7)-jch)
文摘Meretricis concha is a kind of marine traditional Chinese medicine(TCM), and has been commonly used for the treatment of asthma and scald burns. In order to investigate the relationship between the inorganic elemental fingerprint and the geographical origin identification of Meretricis concha, the elemental contents of M. concha from five sampling points in Rushan Bay have been determined by means of inductively coupled plasma optical emission spectrometry(ICP-OES). Based on the contents of 14 inorganic elements(Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, and Zn), the inorganic elemental fingerprint which well reflects the elemental characteristics was constructed. All the data from the five sampling points were discriminated with accuracy through hierarchical cluster analysis(HCA) and principle component analysis(PCA), indicating that a four-factor model which could explain approximately 80% of the detection data was established, and the elements Al, As, Cd, Cu, Ni and Pb could be viewed as the characteristic elements. This investigation suggests that the inorganic elemental fingerprint combined with multivariate statistical analysis is a promising method for verifying the geographical origin of M. concha, and this strategy should be valuable for the authenticity discrimination of some marine TCM.
基金supported by National Natural Science Foundation of China (Grant No. 51175214)Scientific and Technological Planning Project of China (Grant No. 2011BAG03B01-1)Based Research Operation Expenses Project of Jilin University, China (Grant No. 421032572415)
文摘How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis （SEA） model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics （CFD） and sensitivity analysis of acoustic contribution.
基金China National Science Foundation(40730948,41075037,41175063)Special Project of Chinese Academy of Meteorological Sciences(2007Y006)
文摘Based on the Tropical Cyclone(TC briefly thereafter)Yearbook 1980-2009,this paper first analyzes the number and intensity change of the TCs which passed directly over or by the side of Poyang Lake(the distance of TC center is less than 1°longitude or 1°latitude from the Lake)among all the landfalling TCs in China during the past 30 years.Two cases are examined in detail in this paper.One is severe typhoon Rananim with a speed of 3.26 m/s and a change of 1 hPa in intensity when it was passing the Lake.The other is super typhoon Saomai with a faster moving speed of 6.50 m/s and a larger change in intensity of 6 hPa.Through numerical simulation experiments,this paper analyzes how the change of underlying surface from water to land contributes to the differences in intensity,speed and mesoscale convection of the two TCs when they passed the Lake.Results show that the moisture and dynamic condition above the Lake were favorable for the maintenance of the intensity when Rananim was passing through Poyang Lake,despite the moisture supply from the ocean was cut off.As a result,there was strong convection around the lake which led to a rainfall spinning counter-clockwise as it was affected by the TC movement.However,little impact was seen in the Saomai case.These results indicate that for the TCs coming ashore on Poyang Lake with a slow speed,the large water body is conducive to the sustaining of the intensity and strengthening of the convection around the TC center and the subsequent heavy rainfall.On the contrary,a fast-moving TC is less likely to be influenced by the underlying surface in terms of intensity and speed.
基金The National Key R&D Program of China(No.2017YFC0805100)the National Natural Science Foundation of China(No.51578137)+1 种基金the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Open Research Fund Program of Jiangsu Key Laboratory of Engineering Mechanics。
文摘To study the distribution law and random characteristics of casting defects in steel castings,24 civil engineering structural cast steel joints were divided into two groups:simple cast steel joints and complex cast steel joints.Three kinds of nondestructive testing(NDT)methods,namely,visual,magnetic particle,and ultrasonic inspections,were used to detect the macroscopic defects in joints.The NDT results were then statistically analyzed.The results show that the unfused core support is a common defect of complex cast steel joints,and the defect can be seen visually,so excavation and repair welding should be carried out before castings leave factories.Casting cracks are extremely likely to occur in the intersection area of tubes,which is called the ultrasonic inspection blind zone.The occurrence probability of gas pores on simple cast steel joints is the largest,and the occurrence probability of core support incomplete fusions on complex cast steel joints is the largest.However,when cast steel joints are counted as a whole sample,the occurrence probability of gas pores is larger than that of core support incomplete fusions.Therefore,it is the most common defect in cast steel joints.
基金Supported by National Natural Science Foundation of China(No.10472077).
文摘Based on the data of phytoplankton concentration and environmental factors in Bohai Bay from May to September in 2003. the relationship between environmental factors and phytoplankton biomass was analyzed. By analysis of variance, the weather condition was found to have no direct relation with phytoplankton biomass. Correlation coefficients showed that temperature, pH value,the concentrations of silicate and nitrate exhibited linear relationship with phytoplankton biomass.With principal component analysis, pollution types which affected the abundance of phytoplankton included point sources such as municipal and industrial effluents, agricultural runoff and earth＇s surface water. Using multivariate stepwise regression method and taking the correlation analysis results into consideration, a multi-step regression equation was developed to predict the concentration of phytoplankton in September 2003. Combined results show that temperature, pH value, the concentrations of silicate and nitrate are the critical ecological factors affecting the phytoplankton biomass in Bohai Bay.
文摘Gyro's fault diagnosis plays a critical role in inertia navigation systems for higher reliability and precision. A new fault diagnosis strategy based on the statistical parameter analysis (SPA) and support vector machine (SVM) classification model was proposed for dynamically tuned gyroscopes (DTG). The SPA, a kind of time domain analysis approach, was introduced to compute a set of statistical parameters of vibration signal as the state features of DTG, with which the SVM model, a novel learning machine based on statistical learning theory (SLT), was applied and constructed to train and identify the working state of DTG. The experimental results verify that the proposed diagnostic strategy can simply and effectively extract the state features of DTG, and it outperforms the radial-basis function (RBF) neural network based diagnostic method and can more reliably and accurately diagnose the working state of DTG.
基金the grants from Guangdong Province Administration of Traditional Chinese Medicine, No.401007
文摘BACKGROUND： Previously, time data were analyzed by using constituent ratio or relative ratio; however, circular statistical analysis could exactly provide average peak phase of diseases. OBJECTIVE： To investigate the correlation of solar term peak with onset and death of acute ischemic stroke. DESIGN： Retrospective case analysis. SETTINGS： Emergency Department of Foshan Municipal Hospital of Traditional Chinese Medicine; Department of Science and Education, the Second People＇s Hospital of Foshan. PARTICIPANTS： A total of 1 597 patients with acute ischemic stroke were selected from Emergency Room, Department of Neurology, Foshan Municipal Hospital of Traditional Chinese Medicine from 1994 to 2002. There were 875 males and 722 females, and their ages ranged from 33 to 97 years. All cases met the diagnostic criteria of acute cerebral infarction modified by the Second National Cerebrovascular Disease Academic Meeting; meanwhile, they were diagnosed with CT/MRI test. Patients and their relatives provided the confirmed consent. METHODS： Solar term of onset was retrospectively analyzed in 1 597 patients with acute ischemic stroke; among them, solar term of death in 90 cases were analyzed by using circular statistical analysis to calculate peak phase of onset and death of acute ischemic stroke and investigate the correlation of solar term with onset and death of acute ischemic stroke. MAIN OUTCOME MEASURES： Onset and death time of patients with acute ischemic stroke. RESULTS： Solar term of onset in 1 597 patients, especially solar term of death in 90 patients, was not concentrated （P 〉 0.05）, and specific peak phase was not found out. Acute ischemic stroke low attacked from vernal equinox to summer begins, but death caused by acute ischemic stroke high attacked from grain buds to autumn begins. CONCLUSION： Patients with acute ischemic stroke do not have specific solar term peak of onset and death.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41230421, 41005029 and 41105065)the National Public Benefit (Meteorology) Research Foundation of China (Grant No. GYHY201106004)
文摘Based on best track data of tropical cyclones（TCs） from the Japan Meteorological Agency, the characteristics of suddenly reversed TCs（SRTCs）, which have turning angles usually approaching 180°, are statistically analyzed from 1949 to 2011 over the western North Pacific Ocean. The typical large-scale circulation patterns of SRTCs are investigated using reanalysis data and dynamical composite analysis. Results show that turnings mainly occur in low latitudes between 10°N and 20°N,and mainly west of 135°E. The majority of SRTCs reach their peak intensity at, or slightly before, the turning time and subsequently decrease at some variable rate. Specifically, SRTCs are divided into four types, each containing two groups（i.e.eight groups in total） in terms of the moving-direction changes. The moving speed of all SRTC types except the south–north type decreases to its lowest during the 24 h, corresponding to a significant reduction in the primary steering components.According to the analysis of the 13 typical flow patterns found in this study, we suggest that sudden track changes are caused by the reversal steering flow. The original balance of the background flow patterns are broken up by new systems, e.g. binary TCs or dispersion-induced anticyclones. Additionally, sudden track changes are often due to double ridge variations of the subtropical high or weakened/strengthened high pressure in the east and west, respectively.
基金This project was funded by the Deanship of Scientific Research(DSR),King Abdulaziz University,Jeddah,Saudi Arabia under Grant No.(KEP-81-130-42)The authors,therefore acknowledge with thanks DSR technical and financial support。
文摘Security is a vital parameter to conserve energy in wireless sensor networks(WSN).Trust management in the WSN is a crucial process as trust is utilized when collaboration is important for accomplishing trustworthy data transmission.But the available routing techniques do not involve security in the design of routing techniques.This study develops a novel statistical analysis with dingo optimizer enabled reliable routing scheme(SADO-RRS)for WSN.The proposed SADO-RRS technique aims to detect the existence of attacks and optimal routes in WSN.In addition,the presented SADORRS technique derives a new statistics based linear discriminant analysis(LDA)for attack detection,Moreover,a trust based dingo optimizer(TBDO)algorithm is applied for optimal route selection in the WSN and accomplishes secure data transmission in WSN.Besides,the TBDO algorithm involves the derivation of the fitness function involving different input variables of WSN.For demonstrating the enhanced outcomes of the SADO-RRS technique,a wide range of simulations was carried out and the outcomes demonstrated the enhanced outcomes of the SADO-RRS technique.
基金This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF-2021R1A6A1A03039493).
文摘Due to the advances of intelligent transportation system(ITSs),traffic forecasting has gained significant interest as robust traffic prediction acts as an important part in different ITSs namely traffic signal control,navigation,route mapping,etc.The traffic prediction model aims to predict the traffic conditions based on the past traffic data.For more accurate traffic prediction,this study proposes an optimal deep learning-enabled statistical analysis model.This study offers the design of optimal convolutional neural network with attention long short term memory(OCNN-ALSTM)model for traffic prediction.The proposed OCNN-ALSTM technique primarily preprocesses the traffic data by the use of min-max normalization technique.Besides,OCNN-ALSTM technique was executed for classifying and predicting the traffic data in real time cases.For enhancing the predictive outcomes of the OCNN-ALSTM technique,the bird swarm algorithm(BSA)is employed to it and thereby overall efficacy of the network gets improved.The design of BSA for optimal hyperparameter tuning of the CNN-ALSTM model shows the novelty of the work.The experimental validation of the OCNNALSTM technique is performed using benchmark datasets and the results are examined under several aspects.The simulation results reported the enhanced outcomes of the OCNN-ALSTM model over the recent methods under several dimensions.
文摘Statistical analysis was done on simultaneous wave and wind using data recorded by discus-shape wave buoy. The area is located in the southern Caspian Sea near the Anzali Port. Recorded wave data were obtained through directional spectrum wave analysis. Recorded wind direction and wind speed were obtained through the related time series as well. For 12-month measurements（May 25 2007-2008）, statistical calculations were done to specify the value of nonlinear auto-correlation of wave and wind using the probability distribution function of wave characteristics and statistical analysis in various time periods. The paper also presents and analyzes the amount of wave energy for the area mentioned on the basis of available database. Analyses showed a suitable comparison between the amounts of wave energy in different seasons. As a result, the best period for the largest amount of wave energy was known. Results showed that in the research period, the mean wave and wind auto correlation were about three hours. Among the probability distribution functions, i.e Weibull, Normal, Lognormal and Rayleigh, ＂Weibull＂ had the best consistency with experimental distribution function shown in different diagrams for each season. Results also showed that the mean wave energy in the research period was about 49.88 k W/m and the maximum density of wave energy was found in February and March, 2010.
基金the financial support provided for this project by the Ministry of Higher Education Malaysia(MoHE)under Fundamental Research Grant Scheme No.FRGS/1/2016/FTK-CARE/F00323.
文摘Statistical Energy Analysis(SEA)is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure.This study investigates the application of the corrected SEA model in a non-reverberant acoustic space where the direct field component from the sound source dominates the total sound field rather than a diffuse field in a reverberant space which the classical SEA model assumption is based on.A corrected SEA model is proposed where the direct field component in the energy is removed and the power injected in the subsystem considers only the remaining power after the loss at first reflection.Measurement was conducted in a box divided into two rooms separated by a partition with an opening where the condition of reverberant and non-reverberant can conveniently be controlled.In the case of a non-reverberant space where acoustic material was installed inside the wall of the experimental box,the signals are corrected by eliminating the direct field component in the measured impulse response.Using the corrected SEA model,comparison of the coupling loss factor(CLF)and damping loss factor(DLF)with the theory shows good agreement.
